From: David Bauer <mail@david-bauer.net>
Date: Mon, 9 Oct 2023 21:08:01 +0000 (+0200)
Subject: uqmi: fix non-working PLMN selection
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c4321462e45c2e78b2870bb5707784022bc47d20;p=openwrt%2Fopenwrt.git

uqmi: fix non-working PLMN selection

The PLMN selection was reset when calling network-register, thus
rendering the sepcific selection of a carrier unapplied.

Set the PLMN selection after executing network-register. This seems to
cause the modem to re-select the carrier eventually.

That being said, qmi does allow the parameterization of the
network-register to include dpecific PLMN settings, however this is
currently not implemented in uqmi.

Signed-off-by: David Bauer <mail@david-bauer.net>
---

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 96555f537c..7b93a03ee5 100755
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -216,15 +216,6 @@ proto_qmi_setup() {
 		fi
 	fi
 
-	if [ -n "$mcc" -a -n "$mnc" ]; then
-		uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
-			echo "Unable to set PLMN"
-			proto_notify_error "$interface" PLMN_FAILED
-			proto_block_restart "$interface"
-			return 1
-		}
-	fi
-
 	# Cleanup current state if any
 	uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
 	uqmi -s -d "$device" --set-ip-family ipv6 --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
@@ -252,6 +243,16 @@ proto_qmi_setup() {
 
 	uqmi -s -d "$device" --network-register > /dev/null 2>&1
 
+	# PLMN selection must happen after the call to network-register
+	if [ -n "$mcc" -a -n "$mnc" ]; then
+		uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
+			echo "Unable to set PLMN"
+			proto_notify_error "$interface" PLMN_FAILED
+			proto_block_restart "$interface"
+			return 1
+		}
+	fi
+
 	[ -n "$modes" ] && {
 		uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
 		sleep 3