From: Imre Kaloz Date: Tue, 24 Feb 2015 18:30:16 +0000 (+0000) Subject: generic/4.0: drop 3.18 specifix dwc2 backport X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c407264643c9ec8187f8ca157b48c4c068cb81b6;p=openwrt%2Fstaging%2Fmkresin.git generic/4.0: drop 3.18 specifix dwc2 backport Signed-off-by: Imre Kaloz SVN-Revision: 44530 --- diff --git a/target/linux/generic/patches-4.0/821-usb-dwc2-dualrole.patch b/target/linux/generic/patches-4.0/821-usb-dwc2-dualrole.patch deleted file mode 100644 index 9e841cb642..0000000000 --- a/target/linux/generic/patches-4.0/821-usb-dwc2-dualrole.patch +++ /dev/null @@ -1,146 +0,0 @@ ---- a/drivers/usb/dwc2/Kconfig -+++ b/drivers/usb/dwc2/Kconfig -@@ -1,6 +1,6 @@ - config USB_DWC2 -- bool "DesignWare USB2 DRD Core Support" -- depends on USB -+ tristate "DesignWare USB2 DRD Core Support" -+ depends on USB || USB_GADGET - help - Say Y here if your system has a Dual Role Hi-Speed USB - controller based on the DesignWare HSOTG IP Core. -@@ -10,49 +10,61 @@ config USB_DWC2 - bus interface module (if you have a PCI bus system) will be - called dwc2_pci.ko, and the platform interface module (for - controllers directly connected to the CPU) will be called -- dwc2_platform.ko. For gadget mode, there will be a single -- module called dwc2_gadget.ko. -- -- NOTE: The s3c-hsotg driver is now renamed to dwc2_gadget. The -- host and gadget drivers are still currently separate drivers. -- There are plans to merge the dwc2_gadget driver with the dwc2 -- host driver in the near future to create a dual-role driver. -+ dwc2_platform.ko. For all modes(host, gadget and dual-role), there -+ will be an additional module named dwc2.ko. - - if USB_DWC2 - -+choice -+ bool "DWC2 Mode Selection" -+ default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET) -+ default USB_DWC2_HOST if (USB && !USB_GADGET) -+ default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET) -+ - config USB_DWC2_HOST -- tristate "Host only mode" -+ bool "Host only mode" - depends on USB - help - The Designware USB2.0 high-speed host controller -- integrated into many SoCs. -+ integrated into many SoCs. Select this option if you want the -+ driver to operate in Host-only mode. - --config USB_DWC2_PLATFORM -- bool "DWC2 Platform" -- depends on USB_DWC2_HOST -- default USB_DWC2_HOST -+comment "Gadget/Dual-role mode requires USB Gadget support to be enabled" -+ -+config USB_DWC2_PERIPHERAL -+ bool "Gadget only mode" -+ depends on USB_GADGET=y || USB_GADGET=USB_DWC2 -+ help -+ The Designware USB2.0 high-speed gadget controller -+ integrated into many SoCs. Select this option if you want the -+ driver to operate in Peripheral-only mode. This option requires -+ USB_GADGET to be enabled. -+ -+config USB_DWC2_DUAL_ROLE -+ bool "Dual Role mode" -+ depends on (USB=y || USB=USB_DWC2) && (USB_GADGET=y || USB_GADGET=USB_DWC2) - help -- The Designware USB2.0 platform interface module for -- controllers directly connected to the CPU. This is only -- used for host mode. -+ Select this option if you want the driver to work in a dual-role -+ mode. In this mode both host and gadget features are enabled, and -+ the role will be determined by the cable that gets plugged-in. This -+ option requires USB_GADGET to be enabled. -+endchoice -+ -+config USB_DWC2_PLATFORM -+ tristate "DWC2 Platform" -+ default USB_DWC2_HOST || USB_DWC2_PERIPHERAL -+ help -+ The Designware USB2.0 platform interface module for -+ controllers directly connected to the CPU. - - config USB_DWC2_PCI -- bool "DWC2 PCI" -+ tristate "DWC2 PCI" - depends on USB_DWC2_HOST && PCI - default USB_DWC2_HOST - help - The Designware USB2.0 PCI interface module for controllers - connected to a PCI bus. This is only used for host mode. - --comment "Gadget mode requires USB Gadget support to be enabled" -- --config USB_DWC2_PERIPHERAL -- tristate "Gadget only mode" -- depends on USB_GADGET -- help -- The Designware USB2.0 high-speed gadget controller -- integrated into many SoCs. -- - config USB_DWC2_DEBUG - bool "Enable Debugging Messages" - help ---- a/drivers/usb/dwc2/Makefile -+++ b/drivers/usb/dwc2/Makefile -@@ -1,28 +1,28 @@ - ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG - ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG - --obj-$(CONFIG_USB_DWC2_HOST) += dwc2.o -+obj-$(CONFIG_USB_DWC2) += dwc2.o - dwc2-y := core.o core_intr.o --dwc2-y += hcd.o hcd_intr.o --dwc2-y += hcd_queue.o hcd_ddma.o -+ -+ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),) -+ dwc2-y += hcd.o hcd_intr.o -+ dwc2-y += hcd_queue.o hcd_ddma.o -+endif -+ -+ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),) -+ dwc2-y += gadget.o -+endif - - # NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to - # this location and renamed gadget.c. When building for dynamically linked --# modules, dwc2_gadget.ko will get built for peripheral mode. For host mode, --# the core module will be dwc2.ko, the PCI bus interface module will called --# dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. --# At present the host and gadget driver will be separate drivers, but there --# are plans in the near future to create a dual-role driver. -+# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role -+# mode. The PCI bus interface module will called dwc2_pci.ko and the platform -+# interface module will be called dwc2_platform.ko. - - ifneq ($(CONFIG_USB_DWC2_PCI),) -- obj-$(CONFIG_USB_DWC2_HOST) += dwc2_pci.o -+ obj-$(CONFIG_USB_DWC2) += dwc2_pci.o - dwc2_pci-y := pci.o - endif - --ifneq ($(CONFIG_USB_DWC2_PLATFORM),) -- obj-$(CONFIG_USB_DWC2_HOST) += dwc2_platform.o -- dwc2_platform-y := platform.o --endif -- --obj-$(CONFIG_USB_DWC2_PERIPHERAL) += dwc2_gadget.o --dwc2_gadget-y := gadget.o -+obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o -+dwc2_platform-y := platform.o