From: Florian Fainelli <florian@openwrt.org>
Date: Sat, 6 Mar 2010 22:33:13 +0000 (+0000)
Subject: add some missing patches to acx-mac80211 it now builds the pci module as well
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c3ef00eb2bce7c733ea536db6279491faafae088;p=openwrt%2Fstaging%2Flinusw.git

add some missing patches to acx-mac80211 it now builds the pci module as well

SVN-Revision: 20020
---

diff --git a/package/acx-mac80211/patches/003-build_as_modules.patch b/package/acx-mac80211/patches/003-build_as_modules.patch
new file mode 100644
index 0000000000..349de5686f
--- /dev/null
+++ b/package/acx-mac80211/patches/003-build_as_modules.patch
@@ -0,0 +1,13 @@
+Index: acx-mac80211-20100302/Makefile
+===================================================================
+--- acx-mac80211-20100302.orig/Makefile	2010-03-06 22:13:23.000000000 +0100
++++ acx-mac80211-20100302/Makefile	2010-03-06 22:13:28.000000000 +0100
+@@ -29,7 +29,7 @@
+ 	acx-mac80211-obj-$(CONFIG_ACX_MAC80211_PCI) += pci.o
+ 	acx-mac80211-obj-$(CONFIG_ACX_MAC80211_USB) += usb.o
+ 	acx-mac80211-obj-$(CONFIG_ACX_MAC80211_MEM) += mem.o
+-	acx-mac80211-objs := common.o $(acx-mac80211-obj-y)
++	acx-mac80211-objs := common.o $(acx-mac80211-obj-m)
+ 	
+ else
+ # Otherwise we were called directly from the command line: the kernel build
diff --git a/package/acx-mac80211/patches/004-vlynq_fixes.patch b/package/acx-mac80211/patches/004-vlynq_fixes.patch
new file mode 100644
index 0000000000..011c67d84a
--- /dev/null
+++ b/package/acx-mac80211/patches/004-vlynq_fixes.patch
@@ -0,0 +1,49 @@
+Index: acx-mac80211-20100302/pci.c
+===================================================================
+--- acx-mac80211-20100302.orig/pci.c	2010-03-06 22:22:02.000000000 +0100
++++ acx-mac80211-20100302/pci.c	2010-03-06 22:22:29.000000000 +0100
+@@ -4309,7 +4309,7 @@
+ 	addr = (u32)ioremap(vdev->mem_start, 0x1000);
+ 	if (!addr) {
+ 		printk(KERN_ERR "acx: %s: failed to remap io memory\n",
+-		       vdev->dev.bus_id);
++		       dev_name(&vdev->dev));
+ 		result = -ENXIO;
+ 		goto fail;
+ 	}
+@@ -4323,7 +4323,7 @@
+ 	ieee = ieee80211_alloc_hw(sizeof(struct acx_device), &acxpci_hw_ops);
+ 	if (!ieee) {
+ 		printk("acx: could not allocate ieee80211 structure %s\n",
+-		       vdev->dev.bus_id);
++		       dev_name(&vdev->dev));
+ 		goto fail_alloc_netdev;
+ 	}
+ 	ieee->flags &=	 ~IEEE80211_HW_RX_INCLUDES_FCS;
+@@ -4365,7 +4365,7 @@
+ 
+ 	printk("acx: found %s-based wireless network card at %s, irq:%d, "
+ 	       "phymem:0x%x, mem:0x%p\n",
+-	       match->name, vdev->dev.bus_id, adev->irq,
++	       match->name, dev_name(&vdev->dev), adev->irq,
+ 	       vdev->mem_start, adev->iobase);
+ 	log(L_ANY, "acx: the initial debug setting is 0x%04X\n", acx_debug);
+ 
+@@ -4416,7 +4416,7 @@
+ 	 * firmware operations happening in parallel or uninitialized data */
+ 
+ 
+-	acx_proc_register_entries(ieee);
++	acx_proc_register_entries(ieee, 0);
+ 
+ 	/* Now we have our device, so make sure the kernel doesn't try
+ 	 * to send packets even though we're not associated to a network yet */
+@@ -4536,7 +4536,7 @@
+ 		CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
+ 	}
+ 
+-	acx_proc_unregister_entries(adev->ieee);
++	acx_proc_unregister_entries(adev->ieee, 0);
+ 
+ 	/* finally, clean up PCI bus state */
+ 	acxpci_s_delete_dma_regions(adev);