From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 14:38:46 +0000 (-0300) Subject: [media] nova-t-usb2: don't do DMA on stack X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c3a66e9f465e7e792dff6ccd571bc657e6504c7b;p=openwrt%2Fstaging%2Fblogic.git [media] nova-t-usb2: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c index fc7569e2728d..26d7188a1163 100644 --- a/drivers/media/usb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c @@ -74,22 +74,29 @@ static struct rc_map_table rc_map_haupp_table[] = { */ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom; + u8 *buf, data, toggle, custom; u16 raw; int i; struct dibusb_device_state *st = d->priv; - dvb_usb_generic_rw(d,cmd,2,key,5,0); + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = DIBUSB_REQ_POLL_REMOTE; + buf[1] = 0x35; + dvb_usb_generic_rw(d, buf, 2, buf, 5, 0); *state = REMOTE_NO_KEY_PRESSED; - switch (key[0]) { + switch (buf[0]) { case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: - raw = ((key[1] << 8) | key[2]) >> 3; + raw = ((buf[1] << 8) | buf[2]) >> 3; toggle = !!(raw & 0x800); data = raw & 0x3f; custom = (raw >> 6) & 0x1f; - deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle); + deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n", + buf[1], buf[2], buf[3], custom, data, toggle); for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) { if (rc5_data(&rc_map_haupp_table[i]) == data && @@ -117,6 +124,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) break; } + kfree(buf); return 0; }