From: Daniel Golle Date: Sun, 28 Jan 2024 03:46:58 +0000 (+0000) Subject: mediatek: backport a hell of thermal commits X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c36de2e73a31c0c41c5e091dce31dbdcf77319de;p=openwrt%2Fstaging%2Fthess.git mediatek: backport a hell of thermal commits Backport almost 50 commits from upstream Linux to improve thermal drivers for MediaTek SoCs and add new LVTS driver for MT7988. Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a.dtsi index 81410c017b..77c262b8ca 100644 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a.dtsi +++ b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a.dtsi @@ -138,6 +138,15 @@ clock-output-names = "clkxtal"; }; + fan: pwm-fan { + compatible = "pwm-fan"; + /* cooling level (0, 1, 2) : (0% duty, 50% duty, 100% duty) */ + cooling-levels = <0 128 255>; + #cooling-cells = <2>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + pmu { compatible = "arm,cortex-a73-pmu"; interrupt-parent = <&gic>; @@ -679,22 +688,15 @@ status = "disabled"; }; - fan: pwm-fan { - compatible = "pwm-fan"; - /* cooling level (0, 1, 2) : (0% duty, 50% duty, 100% duty) */ - cooling-levels = <0 128 255>; - #cooling-cells = <2>; - #thermal-sensor-cells = <1>; - status = "disabled"; - }; - lvts: lvts@1100a000 { - compatible = "mediatek,mt7988-lvts"; + compatible = "mediatek,mt7988-lvts-ap"; reg = <0 0x1100a000 0 0x1000>; clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>; clock-names = "lvts_clk"; + interrupts = ; + resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>; nvmem-cells = <&lvts_calibration>; - nvmem-cell-names = "e_data1"; + nvmem-cell-names = "lvts-calib-data-1"; #thermal-sensor-cells = <1>; }; diff --git a/target/linux/mediatek/filogic/config-6.1 b/target/linux/mediatek/filogic/config-6.1 index 1687aadbc1..fd55e1a80b 100644 --- a/target/linux/mediatek/filogic/config-6.1 +++ b/target/linux/mediatek/filogic/config-6.1 @@ -264,6 +264,9 @@ CONFIG_MTK_SCPSYS=y CONFIG_MTK_SCPSYS_PM_DOMAINS=y # CONFIG_MTK_SVS is not set CONFIG_MTK_THERMAL=y +CONFIG_MTK_SOC_THERMAL=y +CONFIG_MTK_LVTS_THERMAL=y +CONFIG_MTK_LVTS_THERMAL_DEBUGFS=y CONFIG_MTK_TIMER=y # CONFIG_MTK_UART_APDMA is not set CONFIG_MUTEX_SPIN_ON_OWNER=y diff --git a/target/linux/mediatek/mt7622/config-6.1 b/target/linux/mediatek/mt7622/config-6.1 index 89260f78ee..0a876bce74 100644 --- a/target/linux/mediatek/mt7622/config-6.1 +++ b/target/linux/mediatek/mt7622/config-6.1 @@ -267,6 +267,8 @@ CONFIG_MTK_SCPSYS=y CONFIG_MTK_SCPSYS_PM_DOMAINS=y # CONFIG_MTK_SVS is not set CONFIG_MTK_THERMAL=y +CONFIG_MTK_SOC_THERMAL=y +# CONFIG_MTK_LVTS_THERMAL is not set CONFIG_MTK_TIMER=y # CONFIG_MTK_UART_APDMA is not set CONFIG_MUTEX_SPIN_ON_OWNER=y diff --git a/target/linux/mediatek/mt7623/config-6.1 b/target/linux/mediatek/mt7623/config-6.1 index 218016b200..765f14fe90 100644 --- a/target/linux/mediatek/mt7623/config-6.1 +++ b/target/linux/mediatek/mt7623/config-6.1 @@ -385,6 +385,8 @@ CONFIG_MTK_SCPSYS_PM_DOMAINS=y CONFIG_MTK_SMI=y # CONFIG_MTK_SVS is not set CONFIG_MTK_THERMAL=y +CONFIG_MTK_SOC_THERMAL=y +# CONFIG_MTK_LVTS_THERMAL is not set CONFIG_MTK_TIMER=y # CONFIG_MTK_UART_APDMA is not set # CONFIG_MUSB_PIO_ONLY is not set diff --git a/target/linux/mediatek/patches-6.1/805-v6.2-thermal-drivers-mtk-use-function-pointer-for-raw_to_.patch b/target/linux/mediatek/patches-6.1/805-v6.2-thermal-drivers-mtk-use-function-pointer-for-raw_to_.patch deleted file mode 100644 index c58ae96403..0000000000 --- a/target/linux/mediatek/patches-6.1/805-v6.2-thermal-drivers-mtk-use-function-pointer-for-raw_to_.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 69c17529e8418da3eec703dde31e1b01e5b0f7e8 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Wed, 18 Jan 2023 02:48:41 +0000 -Subject: [PATCH 1/2] thermal/drivers/mtk: use function pointer for - raw_to_mcelsius - -Instead of having if-else logic selecting either raw_to_mcelsius_v1 or -raw_to_mcelsius_v2 in mtk_thermal_bank_temperature introduce a function -pointer raw_to_mcelsius to struct mtk_thermal which is initialized in the -probe function. - -Signed-off-by: Daniel Golle ---- - drivers/thermal/mtk_thermal.c | 17 ++++++++++------- - 1 file changed, 10 insertions(+), 7 deletions(-) - ---- a/drivers/thermal/mtk_thermal.c -+++ b/drivers/thermal/mtk_thermal.c -@@ -292,6 +292,8 @@ struct mtk_thermal { - - const struct mtk_thermal_data *conf; - struct mtk_thermal_bank banks[MAX_NUM_ZONES]; -+ -+ int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); - }; - - /* MT8183 thermal sensor data */ -@@ -656,13 +658,9 @@ static int mtk_thermal_bank_temperature( - for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { - raw = readl(mt->thermal_base + conf->msr[i]); - -- if (mt->conf->version == MTK_THERMAL_V1) { -- temp = raw_to_mcelsius_v1( -- mt, conf->bank_data[bank->id].sensors[i], raw); -- } else { -- temp = raw_to_mcelsius_v2( -- mt, conf->bank_data[bank->id].sensors[i], raw); -- } -+ temp = mt->raw_to_mcelsius( -+ mt, conf->bank_data[bank->id].sensors[i], raw); -+ - - /* - * The first read of a sensor often contains very high bogus -@@ -1075,6 +1073,11 @@ static int mtk_thermal_probe(struct plat - mtk_thermal_release_periodic_ts(mt, auxadc_base); - } - -+ if (mt->conf->version == MTK_THERMAL_V1) -+ mt->raw_to_mcelsius = raw_to_mcelsius_v1; -+ else -+ mt->raw_to_mcelsius = raw_to_mcelsius_v2; -+ - for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) - for (i = 0; i < mt->conf->num_banks; i++) - mtk_thermal_init_bank(mt, i, apmixed_phys_base, diff --git a/target/linux/mediatek/patches-6.1/806-v6.2-thermal-mediatek-add-support-for-MT7986-and-MT7981.patch b/target/linux/mediatek/patches-6.1/806-v6.2-thermal-mediatek-add-support-for-MT7986-and-MT7981.patch deleted file mode 100644 index 65311d5718..0000000000 --- a/target/linux/mediatek/patches-6.1/806-v6.2-thermal-mediatek-add-support-for-MT7986-and-MT7981.patch +++ /dev/null @@ -1,240 +0,0 @@ -From aa957c759b1182aee00cc35178667f849f941b42 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Wed, 30 Nov 2022 13:19:39 +0000 -Subject: [PATCH 2/2] thermal: mediatek: add support for MT7986 and MT7981 - -Add support for V3 generation thermal found in MT7986 and MT7981 SoCs. -Brings code to assign values from efuse as well as new function to -convert raw temperature to millidegree celsius, as found in MediaTek's -SDK sources (but cleaned up and de-duplicated) - -[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/baf36c7eef477aae1f8f2653b6c29e2caf48475b -Signed-off-by: Daniel Golle ---- - drivers/thermal/mtk_thermal.c | 137 ++++++++++++++++++++++++++++++++-- - 1 file changed, 132 insertions(+), 5 deletions(-) - ---- a/drivers/thermal/mtk_thermal.c -+++ b/drivers/thermal/mtk_thermal.c -@@ -150,6 +150,20 @@ - #define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) - #define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) - -+/* -+ * Layout of the fuses providing the calibration data -+ * These macros can be used for MT7981 and MT7986. -+ */ -+#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff) -+#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f) -+#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f) -+#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff) -+#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff) -+#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff) -+#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1) -+#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1) -+#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1) -+ - enum { - VTS1, - VTS2, -@@ -163,6 +177,7 @@ enum { - enum mtk_thermal_version { - MTK_THERMAL_V1 = 1, - MTK_THERMAL_V2, -+ MTK_THERMAL_V3, - }; - - /* MT2701 thermal sensors */ -@@ -245,6 +260,27 @@ enum mtk_thermal_version { - /* The calibration coefficient of sensor */ - #define MT8183_CALIBRATION 153 - -+/* AUXADC channel 11 is used for the temperature sensors */ -+#define MT7986_TEMP_AUXADC_CHANNEL 11 -+ -+/* The total number of temperature sensors in the MT7986 */ -+#define MT7986_NUM_SENSORS 1 -+ -+/* The number of banks in the MT7986 */ -+#define MT7986_NUM_ZONES 1 -+ -+/* The number of sensing points per bank */ -+#define MT7986_NUM_SENSORS_PER_ZONE 1 -+ -+/* MT7986 thermal sensors */ -+#define MT7986_TS1 0 -+ -+/* The number of controller in the MT7986 */ -+#define MT7986_NUM_CONTROLLER 1 -+ -+/* The calibration coefficient of sensor */ -+#define MT7986_CALIBRATION 165 -+ - struct mtk_thermal; - - struct thermal_bank_cfg { -@@ -388,6 +424,14 @@ static const int mt7622_mux_values[MT762 - static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; - static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; - -+/* MT7986 thermal sensor data */ -+static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, }; -+static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; -+static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; -+static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, }; -+static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; -+static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; -+ - /* - * The MT8173 thermal controller has four banks. Each bank can read up to - * four temperature sensors simultaneously. The MT8173 has a total of 5 -@@ -551,6 +595,30 @@ static const struct mtk_thermal_data mt8 - .version = MTK_THERMAL_V1, - }; - -+/* -+ * MT7986 uses AUXADC Channel 11 for raw data access. -+ */ -+static const struct mtk_thermal_data mt7986_thermal_data = { -+ .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL, -+ .num_banks = MT7986_NUM_ZONES, -+ .num_sensors = MT7986_NUM_SENSORS, -+ .vts_index = mt7986_vts_index, -+ .cali_val = MT7986_CALIBRATION, -+ .num_controller = MT7986_NUM_CONTROLLER, -+ .controller_offset = mt7986_tc_offset, -+ .need_switch_bank = true, -+ .bank_data = { -+ { -+ .num_sensors = 1, -+ .sensors = mt7986_bank_data, -+ }, -+ }, -+ .msr = mt7986_msr, -+ .adcpnp = mt7986_adcpnp, -+ .sensor_mux_values = mt7986_mux_values, -+ .version = MTK_THERMAL_V3, -+}; -+ - /** - * raw_to_mcelsius - convert a raw ADC value to mcelsius - * @mt: The thermal controller -@@ -605,6 +673,22 @@ static int raw_to_mcelsius_v2(struct mtk - return (format_2 - tmp) * 100; - } - -+static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw) -+{ -+ s32 tmp; -+ -+ if (raw == 0) -+ return 0; -+ -+ raw &= 0xfff; -+ tmp = 100000 * 15 / 16 * 10000; -+ tmp /= 4096 - 512 + mt->adc_ge; -+ tmp /= 1490; -+ tmp *= raw - mt->vts[sensno] - 2900; -+ -+ return mt->degc_cali * 500 - tmp; -+} -+ - /** - * mtk_thermal_get_bank - get bank - * @bank: The bank -@@ -885,6 +969,25 @@ static int mtk_thermal_extract_efuse_v2( - return 0; - } - -+static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf) -+{ -+ if (!CALIB_BUF1_VALID_V3(buf[1])) -+ return -EINVAL; -+ -+ mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]); -+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]); -+ mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]); -+ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]); -+ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]); -+ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]); -+ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]); -+ -+ if (CALIB_BUF1_ID_V3(buf[1]) == 0) -+ mt->o_slope = 0; -+ -+ return 0; -+} -+ - static int mtk_thermal_get_calibration_data(struct device *dev, - struct mtk_thermal *mt) - { -@@ -895,6 +998,7 @@ static int mtk_thermal_get_calibration_d - - /* Start with default values */ - mt->adc_ge = 512; -+ mt->adc_oe = 512; - for (i = 0; i < mt->conf->num_sensors; i++) - mt->vts[i] = 260; - mt->degc_cali = 40; -@@ -920,10 +1024,20 @@ static int mtk_thermal_get_calibration_d - goto out; - } - -- if (mt->conf->version == MTK_THERMAL_V1) -+ switch (mt->conf->version) { -+ case MTK_THERMAL_V1: - ret = mtk_thermal_extract_efuse_v1(mt, buf); -- else -+ break; -+ case MTK_THERMAL_V2: - ret = mtk_thermal_extract_efuse_v2(mt, buf); -+ break; -+ case MTK_THERMAL_V3: -+ ret = mtk_thermal_extract_efuse_v3(mt, buf); -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } - - if (ret) { - dev_info(dev, "Device not calibrated, using default calibration values\n"); -@@ -954,6 +1068,10 @@ static const struct of_device_id mtk_the - .data = (void *)&mt7622_thermal_data, - }, - { -+ .compatible = "mediatek,mt7986-thermal", -+ .data = (void *)&mt7986_thermal_data, -+ }, -+ { - .compatible = "mediatek,mt8183-thermal", - .data = (void *)&mt8183_thermal_data, - }, { -@@ -1068,15 +1186,24 @@ static int mtk_thermal_probe(struct plat - goto err_disable_clk_auxadc; - } - -- if (mt->conf->version == MTK_THERMAL_V2) { -+ if (mt->conf->version != MTK_THERMAL_V1) { - mtk_thermal_turn_on_buffer(apmixed_base); - mtk_thermal_release_periodic_ts(mt, auxadc_base); - } - -- if (mt->conf->version == MTK_THERMAL_V1) -+ switch (mt->conf->version) { -+ case MTK_THERMAL_V1: - mt->raw_to_mcelsius = raw_to_mcelsius_v1; -- else -+ break; -+ case MTK_THERMAL_V2: - mt->raw_to_mcelsius = raw_to_mcelsius_v2; -+ break; -+ case MTK_THERMAL_V3: -+ mt->raw_to_mcelsius = raw_to_mcelsius_v3; -+ break; -+ default: -+ break; -+ } - - for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) - for (i = 0; i < mt->conf->num_banks; i++) diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch b/target/linux/mediatek/patches-6.1/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch new file mode 100644 index 0000000000..694b73a2b1 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch @@ -0,0 +1,37 @@ +From f167da186acf90847e1a6d3716e253825a6218ec Mon Sep 17 00:00:00 2001 +From: Randy Dunlap +Date: Thu, 12 Jan 2023 22:44:49 -0800 +Subject: [PATCH 01/42] thermal/drivers/mtk_thermal: Fix kernel-doc function + name + +Use the correct function name in a kernel-doc comment to prevent +a warning: + +drivers/thermal/mtk_thermal.c:562: warning: expecting prototype for raw_to_mcelsius(). Prototype was for raw_to_mcelsius_v1() instead + +Signed-off-by: Randy Dunlap +Cc: "Rafael J. Wysocki" +Cc: Daniel Lezcano +Cc: Amit Kucheria +Cc: Zhang Rui +Cc: Matthias Brugger +Cc: linux-pm@vger.kernel.org +Cc: linux-arm-kernel@lists.infradead.org +Cc: linux-mediatek@lists.infradead.org +Link: https://lore.kernel.org/r/20230113064449.15061-1-rdunlap@infradead.org +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/mtk_thermal.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/mtk_thermal.c ++++ b/drivers/thermal/mtk_thermal.c +@@ -550,7 +550,7 @@ static const struct mtk_thermal_data mt8 + }; + + /** +- * raw_to_mcelsius - convert a raw ADC value to mcelsius ++ * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius + * @mt: The thermal controller + * @sensno: sensor number + * @raw: raw ADC value diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch b/target/linux/mediatek/patches-6.1/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch new file mode 100644 index 0000000000..aaed9d7e90 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch @@ -0,0 +1,37 @@ +From 255509232417ee71fd606cb957d44cf6544f0c43 Mon Sep 17 00:00:00 2001 +From: ye xingchen +Date: Wed, 18 Jan 2023 16:37:47 +0800 +Subject: [PATCH 02/42] thermal/drivers/mtk_thermal: Use + devm_platform_get_and_ioremap_resource() + +Convert platform_get_resource(), devm_ioremap_resource() to a single +call to devm_platform_get_and_ioremap_resource(), as this is exactly +what this function does. + +Signed-off-by: ye xingchen +Link: https://lore.kernel.org/r/202301181637472073620@zte.com.cn +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/mtk_thermal.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/thermal/mtk_thermal.c ++++ b/drivers/thermal/mtk_thermal.c +@@ -990,7 +990,6 @@ static int mtk_thermal_probe(struct plat + int ret, i, ctrl_id; + struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; + struct mtk_thermal *mt; +- struct resource *res; + u64 auxadc_phys_base, apmixed_phys_base; + struct thermal_zone_device *tzdev; + void __iomem *apmixed_base, *auxadc_base; +@@ -1009,8 +1008,7 @@ static int mtk_thermal_probe(struct plat + if (IS_ERR(mt->clk_auxadc)) + return PTR_ERR(mt->clk_auxadc); + +- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- mt->thermal_base = devm_ioremap_resource(&pdev->dev, res); ++ mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); + if (IS_ERR(mt->thermal_base)) + return PTR_ERR(mt->thermal_base); + diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch b/target/linux/mediatek/patches-6.1/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch new file mode 100644 index 0000000000..215b0fd7de --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch @@ -0,0 +1,60 @@ +From ca86dbd309ba03bef38ae91f037e2030bb671ab7 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Wed, 18 Jan 2023 15:40:39 +0000 +Subject: [PATCH 03/42] thermal/drivers/mtk: Use function pointer for + raw_to_mcelsius + +Instead of having if-else logic selecting either raw_to_mcelsius_v1 or +raw_to_mcelsius_v2 in mtk_thermal_bank_temperature introduce a function +pointer raw_to_mcelsius to struct mtk_thermal which is initialized in the +probe function. + +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Golle +Reviewed-by: Matthias Brugger +Link: https://lore.kernel.org/r/69c17529e8418da3eec703dde31e1b01e5b0f7e8.1674055882.git.daniel@makrotopia.org +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/mtk_thermal.c | 17 ++++++++++------- + 1 file changed, 10 insertions(+), 7 deletions(-) + +--- a/drivers/thermal/mtk_thermal.c ++++ b/drivers/thermal/mtk_thermal.c +@@ -292,6 +292,8 @@ struct mtk_thermal { + + const struct mtk_thermal_data *conf; + struct mtk_thermal_bank banks[MAX_NUM_ZONES]; ++ ++ int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); + }; + + /* MT8183 thermal sensor data */ +@@ -656,13 +658,9 @@ static int mtk_thermal_bank_temperature( + for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { + raw = readl(mt->thermal_base + conf->msr[i]); + +- if (mt->conf->version == MTK_THERMAL_V1) { +- temp = raw_to_mcelsius_v1( +- mt, conf->bank_data[bank->id].sensors[i], raw); +- } else { +- temp = raw_to_mcelsius_v2( +- mt, conf->bank_data[bank->id].sensors[i], raw); +- } ++ temp = mt->raw_to_mcelsius( ++ mt, conf->bank_data[bank->id].sensors[i], raw); ++ + + /* + * The first read of a sensor often contains very high bogus +@@ -1073,6 +1071,11 @@ static int mtk_thermal_probe(struct plat + mtk_thermal_release_periodic_ts(mt, auxadc_base); + } + ++ if (mt->conf->version == MTK_THERMAL_V1) ++ mt->raw_to_mcelsius = raw_to_mcelsius_v1; ++ else ++ mt->raw_to_mcelsius = raw_to_mcelsius_v2; ++ + for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) + for (i = 0; i < mt->conf->num_banks; i++) + mtk_thermal_init_bank(mt, i, apmixed_phys_base, diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch b/target/linux/mediatek/patches-6.1/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch new file mode 100644 index 0000000000..ef2006775a --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch @@ -0,0 +1,236 @@ +From aec1d89dccc7cba04fdb3e52dfda328f3302ba17 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Wed, 18 Jan 2023 15:40:58 +0000 +Subject: [PATCH 04/42] thermal/drivers/mtk: Add support for MT7986 and MT7981 + +Add support for V3 generation thermal found in MT7986 and MT7981 SoCs. +Brings code to assign values from efuse as well as new function to +convert raw temperature to millidegree celsius, as found in MediaTek's +SDK sources (but cleaned up and de-duplicated) + +[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/baf36c7eef477aae1f8f2653b6c29e2caf48475b + +Signed-off-by: Daniel Golle +Reviewed-by: AngeloGioacchino Del Regno +Link: https://lore.kernel.org/r/2d341fc45266217249586eb4bd3be3ac4ca83a12.1674055882.git.daniel@makrotopia.org +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/mtk_thermal.c | 128 ++++++++++++++++++++++++++++++++-- + 1 file changed, 124 insertions(+), 4 deletions(-) + +--- a/drivers/thermal/mtk_thermal.c ++++ b/drivers/thermal/mtk_thermal.c +@@ -150,6 +150,20 @@ + #define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) + #define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) + ++/* ++ * Layout of the fuses providing the calibration data ++ * These macros can be used for MT7981 and MT7986. ++ */ ++#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff) ++#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f) ++#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f) ++#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff) ++#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff) ++#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff) ++#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1) ++#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1) ++#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1) ++ + enum { + VTS1, + VTS2, +@@ -163,6 +177,7 @@ enum { + enum mtk_thermal_version { + MTK_THERMAL_V1 = 1, + MTK_THERMAL_V2, ++ MTK_THERMAL_V3, + }; + + /* MT2701 thermal sensors */ +@@ -245,6 +260,27 @@ enum mtk_thermal_version { + /* The calibration coefficient of sensor */ + #define MT8183_CALIBRATION 153 + ++/* AUXADC channel 11 is used for the temperature sensors */ ++#define MT7986_TEMP_AUXADC_CHANNEL 11 ++ ++/* The total number of temperature sensors in the MT7986 */ ++#define MT7986_NUM_SENSORS 1 ++ ++/* The number of banks in the MT7986 */ ++#define MT7986_NUM_ZONES 1 ++ ++/* The number of sensing points per bank */ ++#define MT7986_NUM_SENSORS_PER_ZONE 1 ++ ++/* MT7986 thermal sensors */ ++#define MT7986_TS1 0 ++ ++/* The number of controller in the MT7986 */ ++#define MT7986_NUM_CONTROLLER 1 ++ ++/* The calibration coefficient of sensor */ ++#define MT7986_CALIBRATION 165 ++ + struct mtk_thermal; + + struct thermal_bank_cfg { +@@ -388,6 +424,14 @@ static const int mt7622_mux_values[MT762 + static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; + static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; + ++/* MT7986 thermal sensor data */ ++static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, }; ++static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; ++static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; ++static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, }; ++static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; ++static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; ++ + /* + * The MT8173 thermal controller has four banks. Each bank can read up to + * four temperature sensors simultaneously. The MT8173 has a total of 5 +@@ -551,6 +595,30 @@ static const struct mtk_thermal_data mt8 + .version = MTK_THERMAL_V1, + }; + ++/* ++ * MT7986 uses AUXADC Channel 11 for raw data access. ++ */ ++static const struct mtk_thermal_data mt7986_thermal_data = { ++ .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL, ++ .num_banks = MT7986_NUM_ZONES, ++ .num_sensors = MT7986_NUM_SENSORS, ++ .vts_index = mt7986_vts_index, ++ .cali_val = MT7986_CALIBRATION, ++ .num_controller = MT7986_NUM_CONTROLLER, ++ .controller_offset = mt7986_tc_offset, ++ .need_switch_bank = true, ++ .bank_data = { ++ { ++ .num_sensors = 1, ++ .sensors = mt7986_bank_data, ++ }, ++ }, ++ .msr = mt7986_msr, ++ .adcpnp = mt7986_adcpnp, ++ .sensor_mux_values = mt7986_mux_values, ++ .version = MTK_THERMAL_V3, ++}; ++ + /** + * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius + * @mt: The thermal controller +@@ -605,6 +673,22 @@ static int raw_to_mcelsius_v2(struct mtk + return (format_2 - tmp) * 100; + } + ++static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw) ++{ ++ s32 tmp; ++ ++ if (raw == 0) ++ return 0; ++ ++ raw &= 0xfff; ++ tmp = 100000 * 15 / 16 * 10000; ++ tmp /= 4096 - 512 + mt->adc_ge; ++ tmp /= 1490; ++ tmp *= raw - mt->vts[sensno] - 2900; ++ ++ return mt->degc_cali * 500 - tmp; ++} ++ + /** + * mtk_thermal_get_bank - get bank + * @bank: The bank +@@ -885,6 +969,25 @@ static int mtk_thermal_extract_efuse_v2( + return 0; + } + ++static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf) ++{ ++ if (!CALIB_BUF1_VALID_V3(buf[1])) ++ return -EINVAL; ++ ++ mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]); ++ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]); ++ mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]); ++ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]); ++ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]); ++ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]); ++ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]); ++ ++ if (CALIB_BUF1_ID_V3(buf[1]) == 0) ++ mt->o_slope = 0; ++ ++ return 0; ++} ++ + static int mtk_thermal_get_calibration_data(struct device *dev, + struct mtk_thermal *mt) + { +@@ -895,6 +998,7 @@ static int mtk_thermal_get_calibration_d + + /* Start with default values */ + mt->adc_ge = 512; ++ mt->adc_oe = 512; + for (i = 0; i < mt->conf->num_sensors; i++) + mt->vts[i] = 260; + mt->degc_cali = 40; +@@ -920,10 +1024,20 @@ static int mtk_thermal_get_calibration_d + goto out; + } + +- if (mt->conf->version == MTK_THERMAL_V1) ++ switch (mt->conf->version) { ++ case MTK_THERMAL_V1: + ret = mtk_thermal_extract_efuse_v1(mt, buf); +- else ++ break; ++ case MTK_THERMAL_V2: + ret = mtk_thermal_extract_efuse_v2(mt, buf); ++ break; ++ case MTK_THERMAL_V3: ++ ret = mtk_thermal_extract_efuse_v3(mt, buf); ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } + + if (ret) { + dev_info(dev, "Device not calibrated, using default calibration values\n"); +@@ -954,6 +1068,10 @@ static const struct of_device_id mtk_the + .data = (void *)&mt7622_thermal_data, + }, + { ++ .compatible = "mediatek,mt7986-thermal", ++ .data = (void *)&mt7986_thermal_data, ++ }, ++ { + .compatible = "mediatek,mt8183-thermal", + .data = (void *)&mt8183_thermal_data, + }, { +@@ -1066,15 +1184,17 @@ static int mtk_thermal_probe(struct plat + goto err_disable_clk_auxadc; + } + +- if (mt->conf->version == MTK_THERMAL_V2) { ++ if (mt->conf->version != MTK_THERMAL_V1) { + mtk_thermal_turn_on_buffer(apmixed_base); + mtk_thermal_release_periodic_ts(mt, auxadc_base); + } + + if (mt->conf->version == MTK_THERMAL_V1) + mt->raw_to_mcelsius = raw_to_mcelsius_v1; +- else ++ else if (mt->conf->version == MTK_THERMAL_V2) + mt->raw_to_mcelsius = raw_to_mcelsius_v2; ++ else ++ mt->raw_to_mcelsius = raw_to_mcelsius_v3; + + for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) + for (i = 0; i < mt->conf->num_banks; i++) diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch b/target/linux/mediatek/patches-6.1/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch new file mode 100644 index 0000000000..e102a338cd --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch @@ -0,0 +1,2602 @@ +From 5e3aac197a74914ccec2732a89c29d960730d28f Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Thu, 9 Feb 2023 11:56:23 +0100 +Subject: [PATCH 05/42] thermal/drivers/mediatek: Relocate driver to mediatek + folder + +Add MediaTek proprietary folder to upstream more thermal zone and cooler +drivers, relocate the original thermal controller driver to it, and rename it +as "auxadc_thermal.c" to show its purpose more clearly. + +Signed-off-by: Balsam CHIHI +Reviewed-by: AngeloGioacchino Del Regno +Link: https://lore.kernel.org/r/20230209105628.50294-2-bchihi@baylibre.com +Signed-off-by: Daniel Lezcano +Signed-off-by: Rafael J. Wysocki +--- + drivers/thermal/Kconfig | 14 ++++--------- + drivers/thermal/Makefile | 2 +- + drivers/thermal/mediatek/Kconfig | 21 +++++++++++++++++++ + drivers/thermal/mediatek/Makefile | 1 + + .../auxadc_thermal.c} | 2 +- + 5 files changed, 28 insertions(+), 12 deletions(-) + create mode 100644 drivers/thermal/mediatek/Kconfig + create mode 100644 drivers/thermal/mediatek/Makefile + rename drivers/thermal/{mtk_thermal.c => mediatek/auxadc_thermal.c} (99%) + +--- a/drivers/thermal/Kconfig ++++ b/drivers/thermal/Kconfig +@@ -412,16 +412,10 @@ config DA9062_THERMAL + zone. + Compatible with the DA9062 and DA9061 PMICs. + +-config MTK_THERMAL +- tristate "Temperature sensor driver for mediatek SoCs" +- depends on ARCH_MEDIATEK || COMPILE_TEST +- depends on HAS_IOMEM +- depends on NVMEM || NVMEM=n +- depends on RESET_CONTROLLER +- default y +- help +- Enable this option if you want to have support for thermal management +- controller present in Mediatek SoCs ++menu "Mediatek thermal drivers" ++depends on ARCH_MEDIATEK || COMPILE_TEST ++source "drivers/thermal/mediatek/Kconfig" ++endmenu + + config AMLOGIC_THERMAL + tristate "Amlogic Thermal Support" +--- a/drivers/thermal/Makefile ++++ b/drivers/thermal/Makefile +@@ -55,7 +55,7 @@ obj-y += st/ + obj-y += qcom/ + obj-y += tegra/ + obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o +-obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o ++obj-y += mediatek/ + obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o + obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o + obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o +--- /dev/null ++++ b/drivers/thermal/mediatek/Kconfig +@@ -0,0 +1,21 @@ ++config MTK_THERMAL ++ tristate "MediaTek thermal drivers" ++ depends on THERMAL_OF ++ help ++ This is the option for MediaTek thermal software solutions. ++ Please enable corresponding options to get temperature ++ information from thermal sensors or turn on throttle ++ mechaisms for thermal mitigation. ++ ++if MTK_THERMAL ++ ++config MTK_SOC_THERMAL ++ tristate "AUXADC temperature sensor driver for MediaTek SoCs" ++ depends on HAS_IOMEM ++ help ++ Enable this option if you want to get SoC temperature ++ information for MediaTek platforms. ++ This driver configures thermal controllers to collect ++ temperature via AUXADC interface. ++ ++endif +--- /dev/null ++++ b/drivers/thermal/mediatek/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o +--- a/drivers/thermal/mtk_thermal.c ++++ /dev/null +@@ -1,1254 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-only +-/* +- * Copyright (c) 2015 MediaTek Inc. +- * Author: Hanyi Wu +- * Sascha Hauer +- * Dawei Chien +- * Louis Yu +- */ +- +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +- +-#include "thermal_hwmon.h" +- +-/* AUXADC Registers */ +-#define AUXADC_CON1_SET_V 0x008 +-#define AUXADC_CON1_CLR_V 0x00c +-#define AUXADC_CON2_V 0x010 +-#define AUXADC_DATA(channel) (0x14 + (channel) * 4) +- +-#define APMIXED_SYS_TS_CON1 0x604 +- +-/* Thermal Controller Registers */ +-#define TEMP_MONCTL0 0x000 +-#define TEMP_MONCTL1 0x004 +-#define TEMP_MONCTL2 0x008 +-#define TEMP_MONIDET0 0x014 +-#define TEMP_MONIDET1 0x018 +-#define TEMP_MSRCTL0 0x038 +-#define TEMP_MSRCTL1 0x03c +-#define TEMP_AHBPOLL 0x040 +-#define TEMP_AHBTO 0x044 +-#define TEMP_ADCPNP0 0x048 +-#define TEMP_ADCPNP1 0x04c +-#define TEMP_ADCPNP2 0x050 +-#define TEMP_ADCPNP3 0x0b4 +- +-#define TEMP_ADCMUX 0x054 +-#define TEMP_ADCEN 0x060 +-#define TEMP_PNPMUXADDR 0x064 +-#define TEMP_ADCMUXADDR 0x068 +-#define TEMP_ADCENADDR 0x074 +-#define TEMP_ADCVALIDADDR 0x078 +-#define TEMP_ADCVOLTADDR 0x07c +-#define TEMP_RDCTRL 0x080 +-#define TEMP_ADCVALIDMASK 0x084 +-#define TEMP_ADCVOLTAGESHIFT 0x088 +-#define TEMP_ADCWRITECTRL 0x08c +-#define TEMP_MSR0 0x090 +-#define TEMP_MSR1 0x094 +-#define TEMP_MSR2 0x098 +-#define TEMP_MSR3 0x0B8 +- +-#define TEMP_SPARE0 0x0f0 +- +-#define TEMP_ADCPNP0_1 0x148 +-#define TEMP_ADCPNP1_1 0x14c +-#define TEMP_ADCPNP2_1 0x150 +-#define TEMP_MSR0_1 0x190 +-#define TEMP_MSR1_1 0x194 +-#define TEMP_MSR2_1 0x198 +-#define TEMP_ADCPNP3_1 0x1b4 +-#define TEMP_MSR3_1 0x1B8 +- +-#define PTPCORESEL 0x400 +- +-#define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff) +- +-#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16) +-#define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff) +- +-#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x) +- +-#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE BIT(0) +-#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE BIT(1) +- +-#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5) +-#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit) +- +-/* MT8173 thermal sensors */ +-#define MT8173_TS1 0 +-#define MT8173_TS2 1 +-#define MT8173_TS3 2 +-#define MT8173_TS4 3 +-#define MT8173_TSABB 4 +- +-/* AUXADC channel 11 is used for the temperature sensors */ +-#define MT8173_TEMP_AUXADC_CHANNEL 11 +- +-/* The total number of temperature sensors in the MT8173 */ +-#define MT8173_NUM_SENSORS 5 +- +-/* The number of banks in the MT8173 */ +-#define MT8173_NUM_ZONES 4 +- +-/* The number of sensing points per bank */ +-#define MT8173_NUM_SENSORS_PER_ZONE 4 +- +-/* The number of controller in the MT8173 */ +-#define MT8173_NUM_CONTROLLER 1 +- +-/* The calibration coefficient of sensor */ +-#define MT8173_CALIBRATION 165 +- +-/* +- * Layout of the fuses providing the calibration data +- * These macros could be used for MT8183, MT8173, MT2701, and MT2712. +- * MT8183 has 6 sensors and needs 6 VTS calibration data. +- * MT8173 has 5 sensors and needs 5 VTS calibration data. +- * MT2701 has 3 sensors and needs 3 VTS calibration data. +- * MT2712 has 4 sensors and needs 4 VTS calibration data. +- */ +-#define CALIB_BUF0_VALID_V1 BIT(0) +-#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff) +-#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff) +-#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff) +-#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff) +-#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff) +-#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff) +-#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff) +-#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f) +-#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f) +-#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1) +-#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1) +- +-/* +- * Layout of the fuses providing the calibration data +- * These macros could be used for MT7622. +- */ +-#define CALIB_BUF0_ADC_OE_V2(x) (((x) >> 22) & 0x3ff) +-#define CALIB_BUF0_ADC_GE_V2(x) (((x) >> 12) & 0x3ff) +-#define CALIB_BUF0_DEGC_CALI_V2(x) (((x) >> 6) & 0x3f) +-#define CALIB_BUF0_O_SLOPE_V2(x) (((x) >> 0) & 0x3f) +-#define CALIB_BUF1_VTS_TS1_V2(x) (((x) >> 23) & 0x1ff) +-#define CALIB_BUF1_VTS_TS2_V2(x) (((x) >> 14) & 0x1ff) +-#define CALIB_BUF1_VTS_TSABB_V2(x) (((x) >> 5) & 0x1ff) +-#define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) +-#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) +- +-/* +- * Layout of the fuses providing the calibration data +- * These macros can be used for MT7981 and MT7986. +- */ +-#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff) +-#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f) +-#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f) +-#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff) +-#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff) +-#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff) +-#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1) +-#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1) +-#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1) +- +-enum { +- VTS1, +- VTS2, +- VTS3, +- VTS4, +- VTS5, +- VTSABB, +- MAX_NUM_VTS, +-}; +- +-enum mtk_thermal_version { +- MTK_THERMAL_V1 = 1, +- MTK_THERMAL_V2, +- MTK_THERMAL_V3, +-}; +- +-/* MT2701 thermal sensors */ +-#define MT2701_TS1 0 +-#define MT2701_TS2 1 +-#define MT2701_TSABB 2 +- +-/* AUXADC channel 11 is used for the temperature sensors */ +-#define MT2701_TEMP_AUXADC_CHANNEL 11 +- +-/* The total number of temperature sensors in the MT2701 */ +-#define MT2701_NUM_SENSORS 3 +- +-/* The number of sensing points per bank */ +-#define MT2701_NUM_SENSORS_PER_ZONE 3 +- +-/* The number of controller in the MT2701 */ +-#define MT2701_NUM_CONTROLLER 1 +- +-/* The calibration coefficient of sensor */ +-#define MT2701_CALIBRATION 165 +- +-/* MT2712 thermal sensors */ +-#define MT2712_TS1 0 +-#define MT2712_TS2 1 +-#define MT2712_TS3 2 +-#define MT2712_TS4 3 +- +-/* AUXADC channel 11 is used for the temperature sensors */ +-#define MT2712_TEMP_AUXADC_CHANNEL 11 +- +-/* The total number of temperature sensors in the MT2712 */ +-#define MT2712_NUM_SENSORS 4 +- +-/* The number of sensing points per bank */ +-#define MT2712_NUM_SENSORS_PER_ZONE 4 +- +-/* The number of controller in the MT2712 */ +-#define MT2712_NUM_CONTROLLER 1 +- +-/* The calibration coefficient of sensor */ +-#define MT2712_CALIBRATION 165 +- +-#define MT7622_TEMP_AUXADC_CHANNEL 11 +-#define MT7622_NUM_SENSORS 1 +-#define MT7622_NUM_ZONES 1 +-#define MT7622_NUM_SENSORS_PER_ZONE 1 +-#define MT7622_TS1 0 +-#define MT7622_NUM_CONTROLLER 1 +- +-/* The maximum number of banks */ +-#define MAX_NUM_ZONES 8 +- +-/* The calibration coefficient of sensor */ +-#define MT7622_CALIBRATION 165 +- +-/* MT8183 thermal sensors */ +-#define MT8183_TS1 0 +-#define MT8183_TS2 1 +-#define MT8183_TS3 2 +-#define MT8183_TS4 3 +-#define MT8183_TS5 4 +-#define MT8183_TSABB 5 +- +-/* AUXADC channel is used for the temperature sensors */ +-#define MT8183_TEMP_AUXADC_CHANNEL 11 +- +-/* The total number of temperature sensors in the MT8183 */ +-#define MT8183_NUM_SENSORS 6 +- +-/* The number of banks in the MT8183 */ +-#define MT8183_NUM_ZONES 1 +- +-/* The number of sensing points per bank */ +-#define MT8183_NUM_SENSORS_PER_ZONE 6 +- +-/* The number of controller in the MT8183 */ +-#define MT8183_NUM_CONTROLLER 2 +- +-/* The calibration coefficient of sensor */ +-#define MT8183_CALIBRATION 153 +- +-/* AUXADC channel 11 is used for the temperature sensors */ +-#define MT7986_TEMP_AUXADC_CHANNEL 11 +- +-/* The total number of temperature sensors in the MT7986 */ +-#define MT7986_NUM_SENSORS 1 +- +-/* The number of banks in the MT7986 */ +-#define MT7986_NUM_ZONES 1 +- +-/* The number of sensing points per bank */ +-#define MT7986_NUM_SENSORS_PER_ZONE 1 +- +-/* MT7986 thermal sensors */ +-#define MT7986_TS1 0 +- +-/* The number of controller in the MT7986 */ +-#define MT7986_NUM_CONTROLLER 1 +- +-/* The calibration coefficient of sensor */ +-#define MT7986_CALIBRATION 165 +- +-struct mtk_thermal; +- +-struct thermal_bank_cfg { +- unsigned int num_sensors; +- const int *sensors; +-}; +- +-struct mtk_thermal_bank { +- struct mtk_thermal *mt; +- int id; +-}; +- +-struct mtk_thermal_data { +- s32 num_banks; +- s32 num_sensors; +- s32 auxadc_channel; +- const int *vts_index; +- const int *sensor_mux_values; +- const int *msr; +- const int *adcpnp; +- const int cali_val; +- const int num_controller; +- const int *controller_offset; +- bool need_switch_bank; +- struct thermal_bank_cfg bank_data[MAX_NUM_ZONES]; +- enum mtk_thermal_version version; +-}; +- +-struct mtk_thermal { +- struct device *dev; +- void __iomem *thermal_base; +- +- struct clk *clk_peri_therm; +- struct clk *clk_auxadc; +- /* lock: for getting and putting banks */ +- struct mutex lock; +- +- /* Calibration values */ +- s32 adc_ge; +- s32 adc_oe; +- s32 degc_cali; +- s32 o_slope; +- s32 o_slope_sign; +- s32 vts[MAX_NUM_VTS]; +- +- const struct mtk_thermal_data *conf; +- struct mtk_thermal_bank banks[MAX_NUM_ZONES]; +- +- int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); +-}; +- +-/* MT8183 thermal sensor data */ +-static const int mt8183_bank_data[MT8183_NUM_SENSORS] = { +- MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB +-}; +- +-static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = { +- TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1 +-}; +- +-static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = { +- TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1, +- TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1 +-}; +- +-static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 }; +-static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100}; +- +-static const int mt8183_vts_index[MT8183_NUM_SENSORS] = { +- VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB +-}; +- +-/* MT8173 thermal sensor data */ +-static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { +- { MT8173_TS2, MT8173_TS3 }, +- { MT8173_TS2, MT8173_TS4 }, +- { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, +- { MT8173_TS2 }, +-}; +- +-static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { +- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 +-}; +- +-static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { +- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 +-}; +- +-static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; +-static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, }; +- +-static const int mt8173_vts_index[MT8173_NUM_SENSORS] = { +- VTS1, VTS2, VTS3, VTS4, VTSABB +-}; +- +-/* MT2701 thermal sensor data */ +-static const int mt2701_bank_data[MT2701_NUM_SENSORS] = { +- MT2701_TS1, MT2701_TS2, MT2701_TSABB +-}; +- +-static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = { +- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 +-}; +- +-static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { +- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 +-}; +- +-static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; +-static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, }; +- +-static const int mt2701_vts_index[MT2701_NUM_SENSORS] = { +- VTS1, VTS2, VTS3 +-}; +- +-/* MT2712 thermal sensor data */ +-static const int mt2712_bank_data[MT2712_NUM_SENSORS] = { +- MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4 +-}; +- +-static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = { +- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 +-}; +- +-static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = { +- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 +-}; +- +-static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 }; +-static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, }; +- +-static const int mt2712_vts_index[MT2712_NUM_SENSORS] = { +- VTS1, VTS2, VTS3, VTS4 +-}; +- +-/* MT7622 thermal sensor data */ +-static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, }; +-static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; +-static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; +-static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, }; +-static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; +-static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; +- +-/* MT7986 thermal sensor data */ +-static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, }; +-static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; +-static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; +-static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, }; +-static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; +-static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; +- +-/* +- * The MT8173 thermal controller has four banks. Each bank can read up to +- * four temperature sensors simultaneously. The MT8173 has a total of 5 +- * temperature sensors. We use each bank to measure a certain area of the +- * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple +- * areas, hence is used in different banks. +- * +- * The thermal core only gets the maximum temperature of all banks, so +- * the bank concept wouldn't be necessary here. However, the SVS (Smart +- * Voltage Scaling) unit makes its decisions based on the same bank +- * data, and this indeed needs the temperatures of the individual banks +- * for making better decisions. +- */ +-static const struct mtk_thermal_data mt8173_thermal_data = { +- .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL, +- .num_banks = MT8173_NUM_ZONES, +- .num_sensors = MT8173_NUM_SENSORS, +- .vts_index = mt8173_vts_index, +- .cali_val = MT8173_CALIBRATION, +- .num_controller = MT8173_NUM_CONTROLLER, +- .controller_offset = mt8173_tc_offset, +- .need_switch_bank = true, +- .bank_data = { +- { +- .num_sensors = 2, +- .sensors = mt8173_bank_data[0], +- }, { +- .num_sensors = 2, +- .sensors = mt8173_bank_data[1], +- }, { +- .num_sensors = 3, +- .sensors = mt8173_bank_data[2], +- }, { +- .num_sensors = 1, +- .sensors = mt8173_bank_data[3], +- }, +- }, +- .msr = mt8173_msr, +- .adcpnp = mt8173_adcpnp, +- .sensor_mux_values = mt8173_mux_values, +- .version = MTK_THERMAL_V1, +-}; +- +-/* +- * The MT2701 thermal controller has one bank, which can read up to +- * three temperature sensors simultaneously. The MT2701 has a total of 3 +- * temperature sensors. +- * +- * The thermal core only gets the maximum temperature of this one bank, +- * so the bank concept wouldn't be necessary here. However, the SVS (Smart +- * Voltage Scaling) unit makes its decisions based on the same bank +- * data. +- */ +-static const struct mtk_thermal_data mt2701_thermal_data = { +- .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL, +- .num_banks = 1, +- .num_sensors = MT2701_NUM_SENSORS, +- .vts_index = mt2701_vts_index, +- .cali_val = MT2701_CALIBRATION, +- .num_controller = MT2701_NUM_CONTROLLER, +- .controller_offset = mt2701_tc_offset, +- .need_switch_bank = true, +- .bank_data = { +- { +- .num_sensors = 3, +- .sensors = mt2701_bank_data, +- }, +- }, +- .msr = mt2701_msr, +- .adcpnp = mt2701_adcpnp, +- .sensor_mux_values = mt2701_mux_values, +- .version = MTK_THERMAL_V1, +-}; +- +-/* +- * The MT2712 thermal controller has one bank, which can read up to +- * four temperature sensors simultaneously. The MT2712 has a total of 4 +- * temperature sensors. +- * +- * The thermal core only gets the maximum temperature of this one bank, +- * so the bank concept wouldn't be necessary here. However, the SVS (Smart +- * Voltage Scaling) unit makes its decisions based on the same bank +- * data. +- */ +-static const struct mtk_thermal_data mt2712_thermal_data = { +- .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL, +- .num_banks = 1, +- .num_sensors = MT2712_NUM_SENSORS, +- .vts_index = mt2712_vts_index, +- .cali_val = MT2712_CALIBRATION, +- .num_controller = MT2712_NUM_CONTROLLER, +- .controller_offset = mt2712_tc_offset, +- .need_switch_bank = true, +- .bank_data = { +- { +- .num_sensors = 4, +- .sensors = mt2712_bank_data, +- }, +- }, +- .msr = mt2712_msr, +- .adcpnp = mt2712_adcpnp, +- .sensor_mux_values = mt2712_mux_values, +- .version = MTK_THERMAL_V1, +-}; +- +-/* +- * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data +- * access. +- */ +-static const struct mtk_thermal_data mt7622_thermal_data = { +- .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL, +- .num_banks = MT7622_NUM_ZONES, +- .num_sensors = MT7622_NUM_SENSORS, +- .vts_index = mt7622_vts_index, +- .cali_val = MT7622_CALIBRATION, +- .num_controller = MT7622_NUM_CONTROLLER, +- .controller_offset = mt7622_tc_offset, +- .need_switch_bank = true, +- .bank_data = { +- { +- .num_sensors = 1, +- .sensors = mt7622_bank_data, +- }, +- }, +- .msr = mt7622_msr, +- .adcpnp = mt7622_adcpnp, +- .sensor_mux_values = mt7622_mux_values, +- .version = MTK_THERMAL_V2, +-}; +- +-/* +- * The MT8183 thermal controller has one bank for the current SW framework. +- * The MT8183 has a total of 6 temperature sensors. +- * There are two thermal controller to control the six sensor. +- * The first one bind 2 sensor, and the other bind 4 sensors. +- * The thermal core only gets the maximum temperature of all sensor, so +- * the bank concept wouldn't be necessary here. However, the SVS (Smart +- * Voltage Scaling) unit makes its decisions based on the same bank +- * data, and this indeed needs the temperatures of the individual banks +- * for making better decisions. +- */ +-static const struct mtk_thermal_data mt8183_thermal_data = { +- .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL, +- .num_banks = MT8183_NUM_ZONES, +- .num_sensors = MT8183_NUM_SENSORS, +- .vts_index = mt8183_vts_index, +- .cali_val = MT8183_CALIBRATION, +- .num_controller = MT8183_NUM_CONTROLLER, +- .controller_offset = mt8183_tc_offset, +- .need_switch_bank = false, +- .bank_data = { +- { +- .num_sensors = 6, +- .sensors = mt8183_bank_data, +- }, +- }, +- +- .msr = mt8183_msr, +- .adcpnp = mt8183_adcpnp, +- .sensor_mux_values = mt8183_mux_values, +- .version = MTK_THERMAL_V1, +-}; +- +-/* +- * MT7986 uses AUXADC Channel 11 for raw data access. +- */ +-static const struct mtk_thermal_data mt7986_thermal_data = { +- .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL, +- .num_banks = MT7986_NUM_ZONES, +- .num_sensors = MT7986_NUM_SENSORS, +- .vts_index = mt7986_vts_index, +- .cali_val = MT7986_CALIBRATION, +- .num_controller = MT7986_NUM_CONTROLLER, +- .controller_offset = mt7986_tc_offset, +- .need_switch_bank = true, +- .bank_data = { +- { +- .num_sensors = 1, +- .sensors = mt7986_bank_data, +- }, +- }, +- .msr = mt7986_msr, +- .adcpnp = mt7986_adcpnp, +- .sensor_mux_values = mt7986_mux_values, +- .version = MTK_THERMAL_V3, +-}; +- +-/** +- * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius +- * @mt: The thermal controller +- * @sensno: sensor number +- * @raw: raw ADC value +- * +- * This converts the raw ADC value to mcelsius using the SoC specific +- * calibration constants +- */ +-static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw) +-{ +- s32 tmp; +- +- raw &= 0xfff; +- +- tmp = 203450520 << 3; +- tmp /= mt->conf->cali_val + mt->o_slope; +- tmp /= 10000 + mt->adc_ge; +- tmp *= raw - mt->vts[sensno] - 3350; +- tmp >>= 3; +- +- return mt->degc_cali * 500 - tmp; +-} +- +-static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw) +-{ +- s32 format_1; +- s32 format_2; +- s32 g_oe; +- s32 g_gain; +- s32 g_x_roomt; +- s32 tmp; +- +- if (raw == 0) +- return 0; +- +- raw &= 0xfff; +- g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12); +- g_oe = mt->adc_oe - 512; +- format_1 = mt->vts[VTS2] + 3105 - g_oe; +- format_2 = (mt->degc_cali * 10) >> 1; +- g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain; +- +- tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt; +- tmp = tmp * 10 * 100 / 11; +- +- if (mt->o_slope_sign == 0) +- tmp = tmp / (165 - mt->o_slope); +- else +- tmp = tmp / (165 + mt->o_slope); +- +- return (format_2 - tmp) * 100; +-} +- +-static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw) +-{ +- s32 tmp; +- +- if (raw == 0) +- return 0; +- +- raw &= 0xfff; +- tmp = 100000 * 15 / 16 * 10000; +- tmp /= 4096 - 512 + mt->adc_ge; +- tmp /= 1490; +- tmp *= raw - mt->vts[sensno] - 2900; +- +- return mt->degc_cali * 500 - tmp; +-} +- +-/** +- * mtk_thermal_get_bank - get bank +- * @bank: The bank +- * +- * The bank registers are banked, we have to select a bank in the +- * PTPCORESEL register to access it. +- */ +-static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank) +-{ +- struct mtk_thermal *mt = bank->mt; +- u32 val; +- +- if (mt->conf->need_switch_bank) { +- mutex_lock(&mt->lock); +- +- val = readl(mt->thermal_base + PTPCORESEL); +- val &= ~0xf; +- val |= bank->id; +- writel(val, mt->thermal_base + PTPCORESEL); +- } +-} +- +-/** +- * mtk_thermal_put_bank - release bank +- * @bank: The bank +- * +- * release a bank previously taken with mtk_thermal_get_bank, +- */ +-static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) +-{ +- struct mtk_thermal *mt = bank->mt; +- +- if (mt->conf->need_switch_bank) +- mutex_unlock(&mt->lock); +-} +- +-/** +- * mtk_thermal_bank_temperature - get the temperature of a bank +- * @bank: The bank +- * +- * The temperature of a bank is considered the maximum temperature of +- * the sensors associated to the bank. +- */ +-static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) +-{ +- struct mtk_thermal *mt = bank->mt; +- const struct mtk_thermal_data *conf = mt->conf; +- int i, temp = INT_MIN, max = INT_MIN; +- u32 raw; +- +- for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { +- raw = readl(mt->thermal_base + conf->msr[i]); +- +- temp = mt->raw_to_mcelsius( +- mt, conf->bank_data[bank->id].sensors[i], raw); +- +- +- /* +- * The first read of a sensor often contains very high bogus +- * temperature value. Filter these out so that the system does +- * not immediately shut down. +- */ +- if (temp > 200000) +- temp = 0; +- +- if (temp > max) +- max = temp; +- } +- +- return max; +-} +- +-static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature) +-{ +- struct mtk_thermal *mt = tz->devdata; +- int i; +- int tempmax = INT_MIN; +- +- for (i = 0; i < mt->conf->num_banks; i++) { +- struct mtk_thermal_bank *bank = &mt->banks[i]; +- +- mtk_thermal_get_bank(bank); +- +- tempmax = max(tempmax, mtk_thermal_bank_temperature(bank)); +- +- mtk_thermal_put_bank(bank); +- } +- +- *temperature = tempmax; +- +- return 0; +-} +- +-static const struct thermal_zone_device_ops mtk_thermal_ops = { +- .get_temp = mtk_read_temp, +-}; +- +-static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, +- u32 apmixed_phys_base, u32 auxadc_phys_base, +- int ctrl_id) +-{ +- struct mtk_thermal_bank *bank = &mt->banks[num]; +- const struct mtk_thermal_data *conf = mt->conf; +- int i; +- +- int offset = mt->conf->controller_offset[ctrl_id]; +- void __iomem *controller_base = mt->thermal_base + offset; +- +- bank->id = num; +- bank->mt = mt; +- +- mtk_thermal_get_bank(bank); +- +- /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */ +- writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1); +- +- /* +- * filt interval is 1 * 46.540us = 46.54us, +- * sen interval is 429 * 46.540us = 19.96ms +- */ +- writel(TEMP_MONCTL2_FILTER_INTERVAL(1) | +- TEMP_MONCTL2_SENSOR_INTERVAL(429), +- controller_base + TEMP_MONCTL2); +- +- /* poll is set to 10u */ +- writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768), +- controller_base + TEMP_AHBPOLL); +- +- /* temperature sampling control, 1 sample */ +- writel(0x0, controller_base + TEMP_MSRCTL0); +- +- /* exceed this polling time, IRQ would be inserted */ +- writel(0xffffffff, controller_base + TEMP_AHBTO); +- +- /* number of interrupts per event, 1 is enough */ +- writel(0x0, controller_base + TEMP_MONIDET0); +- writel(0x0, controller_base + TEMP_MONIDET1); +- +- /* +- * The MT8173 thermal controller does not have its own ADC. Instead it +- * uses AHB bus accesses to control the AUXADC. To do this the thermal +- * controller has to be programmed with the physical addresses of the +- * AUXADC registers and with the various bit positions in the AUXADC. +- * Also the thermal controller controls a mux in the APMIXEDSYS register +- * space. +- */ +- +- /* +- * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0) +- * automatically by hw +- */ +- writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX); +- +- /* AHB address for auxadc mux selection */ +- writel(auxadc_phys_base + AUXADC_CON1_CLR_V, +- controller_base + TEMP_ADCMUXADDR); +- +- if (mt->conf->version == MTK_THERMAL_V1) { +- /* AHB address for pnp sensor mux selection */ +- writel(apmixed_phys_base + APMIXED_SYS_TS_CON1, +- controller_base + TEMP_PNPMUXADDR); +- } +- +- /* AHB value for auxadc enable */ +- writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN); +- +- /* AHB address for auxadc enable (channel 0 immediate mode selected) */ +- writel(auxadc_phys_base + AUXADC_CON1_SET_V, +- controller_base + TEMP_ADCENADDR); +- +- /* AHB address for auxadc valid bit */ +- writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), +- controller_base + TEMP_ADCVALIDADDR); +- +- /* AHB address for auxadc voltage output */ +- writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), +- controller_base + TEMP_ADCVOLTADDR); +- +- /* read valid & voltage are at the same register */ +- writel(0x0, controller_base + TEMP_RDCTRL); +- +- /* indicate where the valid bit is */ +- writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12), +- controller_base + TEMP_ADCVALIDMASK); +- +- /* no shift */ +- writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT); +- +- /* enable auxadc mux write transaction */ +- writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE, +- controller_base + TEMP_ADCWRITECTRL); +- +- for (i = 0; i < conf->bank_data[num].num_sensors; i++) +- writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]], +- mt->thermal_base + conf->adcpnp[i]); +- +- writel((1 << conf->bank_data[num].num_sensors) - 1, +- controller_base + TEMP_MONCTL0); +- +- writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | +- TEMP_ADCWRITECTRL_ADC_MUX_WRITE, +- controller_base + TEMP_ADCWRITECTRL); +- +- mtk_thermal_put_bank(bank); +-} +- +-static u64 of_get_phys_base(struct device_node *np) +-{ +- u64 size64; +- const __be32 *regaddr_p; +- +- regaddr_p = of_get_address(np, 0, &size64, NULL); +- if (!regaddr_p) +- return OF_BAD_ADDR; +- +- return of_translate_address(np, regaddr_p); +-} +- +-static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf) +-{ +- int i; +- +- if (!(buf[0] & CALIB_BUF0_VALID_V1)) +- return -EINVAL; +- +- mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]); +- +- for (i = 0; i < mt->conf->num_sensors; i++) { +- switch (mt->conf->vts_index[i]) { +- case VTS1: +- mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]); +- break; +- case VTS2: +- mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]); +- break; +- case VTS3: +- mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]); +- break; +- case VTS4: +- mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]); +- break; +- case VTS5: +- mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]); +- break; +- case VTSABB: +- mt->vts[VTSABB] = +- CALIB_BUF2_VTS_TSABB_V1(buf[2]); +- break; +- default: +- break; +- } +- } +- +- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]); +- if (CALIB_BUF1_ID_V1(buf[1]) & +- CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0])) +- mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]); +- else +- mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]); +- +- return 0; +-} +- +-static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf) +-{ +- if (!CALIB_BUF1_VALID_V2(buf[1])) +- return -EINVAL; +- +- mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]); +- mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]); +- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]); +- mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]); +- mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]); +- mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]); +- mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]); +- mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]); +- +- return 0; +-} +- +-static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf) +-{ +- if (!CALIB_BUF1_VALID_V3(buf[1])) +- return -EINVAL; +- +- mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]); +- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]); +- mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]); +- mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]); +- mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]); +- mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]); +- mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]); +- +- if (CALIB_BUF1_ID_V3(buf[1]) == 0) +- mt->o_slope = 0; +- +- return 0; +-} +- +-static int mtk_thermal_get_calibration_data(struct device *dev, +- struct mtk_thermal *mt) +-{ +- struct nvmem_cell *cell; +- u32 *buf; +- size_t len; +- int i, ret = 0; +- +- /* Start with default values */ +- mt->adc_ge = 512; +- mt->adc_oe = 512; +- for (i = 0; i < mt->conf->num_sensors; i++) +- mt->vts[i] = 260; +- mt->degc_cali = 40; +- mt->o_slope = 0; +- +- cell = nvmem_cell_get(dev, "calibration-data"); +- if (IS_ERR(cell)) { +- if (PTR_ERR(cell) == -EPROBE_DEFER) +- return PTR_ERR(cell); +- return 0; +- } +- +- buf = (u32 *)nvmem_cell_read(cell, &len); +- +- nvmem_cell_put(cell); +- +- if (IS_ERR(buf)) +- return PTR_ERR(buf); +- +- if (len < 3 * sizeof(u32)) { +- dev_warn(dev, "invalid calibration data\n"); +- ret = -EINVAL; +- goto out; +- } +- +- switch (mt->conf->version) { +- case MTK_THERMAL_V1: +- ret = mtk_thermal_extract_efuse_v1(mt, buf); +- break; +- case MTK_THERMAL_V2: +- ret = mtk_thermal_extract_efuse_v2(mt, buf); +- break; +- case MTK_THERMAL_V3: +- ret = mtk_thermal_extract_efuse_v3(mt, buf); +- break; +- default: +- ret = -EINVAL; +- break; +- } +- +- if (ret) { +- dev_info(dev, "Device not calibrated, using default calibration values\n"); +- ret = 0; +- } +- +-out: +- kfree(buf); +- +- return ret; +-} +- +-static const struct of_device_id mtk_thermal_of_match[] = { +- { +- .compatible = "mediatek,mt8173-thermal", +- .data = (void *)&mt8173_thermal_data, +- }, +- { +- .compatible = "mediatek,mt2701-thermal", +- .data = (void *)&mt2701_thermal_data, +- }, +- { +- .compatible = "mediatek,mt2712-thermal", +- .data = (void *)&mt2712_thermal_data, +- }, +- { +- .compatible = "mediatek,mt7622-thermal", +- .data = (void *)&mt7622_thermal_data, +- }, +- { +- .compatible = "mediatek,mt7986-thermal", +- .data = (void *)&mt7986_thermal_data, +- }, +- { +- .compatible = "mediatek,mt8183-thermal", +- .data = (void *)&mt8183_thermal_data, +- }, { +- }, +-}; +-MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); +- +-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base) +-{ +- int tmp; +- +- tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1); +- tmp &= ~(0x37); +- tmp |= 0x1; +- writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1); +- udelay(200); +-} +- +-static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt, +- void __iomem *auxadc_base) +-{ +- int tmp; +- +- writel(0x800, auxadc_base + AUXADC_CON1_SET_V); +- writel(0x1, mt->thermal_base + TEMP_MONCTL0); +- tmp = readl(mt->thermal_base + TEMP_MSRCTL1); +- writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1); +-} +- +-static int mtk_thermal_probe(struct platform_device *pdev) +-{ +- int ret, i, ctrl_id; +- struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; +- struct mtk_thermal *mt; +- u64 auxadc_phys_base, apmixed_phys_base; +- struct thermal_zone_device *tzdev; +- void __iomem *apmixed_base, *auxadc_base; +- +- mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); +- if (!mt) +- return -ENOMEM; +- +- mt->conf = of_device_get_match_data(&pdev->dev); +- +- mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); +- if (IS_ERR(mt->clk_peri_therm)) +- return PTR_ERR(mt->clk_peri_therm); +- +- mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc"); +- if (IS_ERR(mt->clk_auxadc)) +- return PTR_ERR(mt->clk_auxadc); +- +- mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); +- if (IS_ERR(mt->thermal_base)) +- return PTR_ERR(mt->thermal_base); +- +- ret = mtk_thermal_get_calibration_data(&pdev->dev, mt); +- if (ret) +- return ret; +- +- mutex_init(&mt->lock); +- +- mt->dev = &pdev->dev; +- +- auxadc = of_parse_phandle(np, "mediatek,auxadc", 0); +- if (!auxadc) { +- dev_err(&pdev->dev, "missing auxadc node\n"); +- return -ENODEV; +- } +- +- auxadc_base = of_iomap(auxadc, 0); +- auxadc_phys_base = of_get_phys_base(auxadc); +- +- of_node_put(auxadc); +- +- if (auxadc_phys_base == OF_BAD_ADDR) { +- dev_err(&pdev->dev, "Can't get auxadc phys address\n"); +- return -EINVAL; +- } +- +- apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0); +- if (!apmixedsys) { +- dev_err(&pdev->dev, "missing apmixedsys node\n"); +- return -ENODEV; +- } +- +- apmixed_base = of_iomap(apmixedsys, 0); +- apmixed_phys_base = of_get_phys_base(apmixedsys); +- +- of_node_put(apmixedsys); +- +- if (apmixed_phys_base == OF_BAD_ADDR) { +- dev_err(&pdev->dev, "Can't get auxadc phys address\n"); +- return -EINVAL; +- } +- +- ret = device_reset_optional(&pdev->dev); +- if (ret) +- return ret; +- +- ret = clk_prepare_enable(mt->clk_auxadc); +- if (ret) { +- dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); +- return ret; +- } +- +- ret = clk_prepare_enable(mt->clk_peri_therm); +- if (ret) { +- dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); +- goto err_disable_clk_auxadc; +- } +- +- if (mt->conf->version != MTK_THERMAL_V1) { +- mtk_thermal_turn_on_buffer(apmixed_base); +- mtk_thermal_release_periodic_ts(mt, auxadc_base); +- } +- +- if (mt->conf->version == MTK_THERMAL_V1) +- mt->raw_to_mcelsius = raw_to_mcelsius_v1; +- else if (mt->conf->version == MTK_THERMAL_V2) +- mt->raw_to_mcelsius = raw_to_mcelsius_v2; +- else +- mt->raw_to_mcelsius = raw_to_mcelsius_v3; +- +- for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) +- for (i = 0; i < mt->conf->num_banks; i++) +- mtk_thermal_init_bank(mt, i, apmixed_phys_base, +- auxadc_phys_base, ctrl_id); +- +- platform_set_drvdata(pdev, mt); +- +- tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, +- &mtk_thermal_ops); +- if (IS_ERR(tzdev)) { +- ret = PTR_ERR(tzdev); +- goto err_disable_clk_peri_therm; +- } +- +- ret = devm_thermal_add_hwmon_sysfs(tzdev); +- if (ret) +- dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs"); +- +- return 0; +- +-err_disable_clk_peri_therm: +- clk_disable_unprepare(mt->clk_peri_therm); +-err_disable_clk_auxadc: +- clk_disable_unprepare(mt->clk_auxadc); +- +- return ret; +-} +- +-static int mtk_thermal_remove(struct platform_device *pdev) +-{ +- struct mtk_thermal *mt = platform_get_drvdata(pdev); +- +- clk_disable_unprepare(mt->clk_peri_therm); +- clk_disable_unprepare(mt->clk_auxadc); +- +- return 0; +-} +- +-static struct platform_driver mtk_thermal_driver = { +- .probe = mtk_thermal_probe, +- .remove = mtk_thermal_remove, +- .driver = { +- .name = "mtk-thermal", +- .of_match_table = mtk_thermal_of_match, +- }, +-}; +- +-module_platform_driver(mtk_thermal_driver); +- +-MODULE_AUTHOR("Michael Kao "); +-MODULE_AUTHOR("Louis Yu "); +-MODULE_AUTHOR("Dawei Chien "); +-MODULE_AUTHOR("Sascha Hauer "); +-MODULE_AUTHOR("Hanyi Wu "); +-MODULE_DESCRIPTION("Mediatek thermal driver"); +-MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -0,0 +1,1254 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Copyright (c) 2015 MediaTek Inc. ++ * Author: Hanyi Wu ++ * Sascha Hauer ++ * Dawei Chien ++ * Louis Yu ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../thermal_hwmon.h" ++ ++/* AUXADC Registers */ ++#define AUXADC_CON1_SET_V 0x008 ++#define AUXADC_CON1_CLR_V 0x00c ++#define AUXADC_CON2_V 0x010 ++#define AUXADC_DATA(channel) (0x14 + (channel) * 4) ++ ++#define APMIXED_SYS_TS_CON1 0x604 ++ ++/* Thermal Controller Registers */ ++#define TEMP_MONCTL0 0x000 ++#define TEMP_MONCTL1 0x004 ++#define TEMP_MONCTL2 0x008 ++#define TEMP_MONIDET0 0x014 ++#define TEMP_MONIDET1 0x018 ++#define TEMP_MSRCTL0 0x038 ++#define TEMP_MSRCTL1 0x03c ++#define TEMP_AHBPOLL 0x040 ++#define TEMP_AHBTO 0x044 ++#define TEMP_ADCPNP0 0x048 ++#define TEMP_ADCPNP1 0x04c ++#define TEMP_ADCPNP2 0x050 ++#define TEMP_ADCPNP3 0x0b4 ++ ++#define TEMP_ADCMUX 0x054 ++#define TEMP_ADCEN 0x060 ++#define TEMP_PNPMUXADDR 0x064 ++#define TEMP_ADCMUXADDR 0x068 ++#define TEMP_ADCENADDR 0x074 ++#define TEMP_ADCVALIDADDR 0x078 ++#define TEMP_ADCVOLTADDR 0x07c ++#define TEMP_RDCTRL 0x080 ++#define TEMP_ADCVALIDMASK 0x084 ++#define TEMP_ADCVOLTAGESHIFT 0x088 ++#define TEMP_ADCWRITECTRL 0x08c ++#define TEMP_MSR0 0x090 ++#define TEMP_MSR1 0x094 ++#define TEMP_MSR2 0x098 ++#define TEMP_MSR3 0x0B8 ++ ++#define TEMP_SPARE0 0x0f0 ++ ++#define TEMP_ADCPNP0_1 0x148 ++#define TEMP_ADCPNP1_1 0x14c ++#define TEMP_ADCPNP2_1 0x150 ++#define TEMP_MSR0_1 0x190 ++#define TEMP_MSR1_1 0x194 ++#define TEMP_MSR2_1 0x198 ++#define TEMP_ADCPNP3_1 0x1b4 ++#define TEMP_MSR3_1 0x1B8 ++ ++#define PTPCORESEL 0x400 ++ ++#define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff) ++ ++#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16) ++#define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff) ++ ++#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x) ++ ++#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE BIT(0) ++#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE BIT(1) ++ ++#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5) ++#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit) ++ ++/* MT8173 thermal sensors */ ++#define MT8173_TS1 0 ++#define MT8173_TS2 1 ++#define MT8173_TS3 2 ++#define MT8173_TS4 3 ++#define MT8173_TSABB 4 ++ ++/* AUXADC channel 11 is used for the temperature sensors */ ++#define MT8173_TEMP_AUXADC_CHANNEL 11 ++ ++/* The total number of temperature sensors in the MT8173 */ ++#define MT8173_NUM_SENSORS 5 ++ ++/* The number of banks in the MT8173 */ ++#define MT8173_NUM_ZONES 4 ++ ++/* The number of sensing points per bank */ ++#define MT8173_NUM_SENSORS_PER_ZONE 4 ++ ++/* The number of controller in the MT8173 */ ++#define MT8173_NUM_CONTROLLER 1 ++ ++/* The calibration coefficient of sensor */ ++#define MT8173_CALIBRATION 165 ++ ++/* ++ * Layout of the fuses providing the calibration data ++ * These macros could be used for MT8183, MT8173, MT2701, and MT2712. ++ * MT8183 has 6 sensors and needs 6 VTS calibration data. ++ * MT8173 has 5 sensors and needs 5 VTS calibration data. ++ * MT2701 has 3 sensors and needs 3 VTS calibration data. ++ * MT2712 has 4 sensors and needs 4 VTS calibration data. ++ */ ++#define CALIB_BUF0_VALID_V1 BIT(0) ++#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff) ++#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff) ++#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff) ++#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff) ++#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff) ++#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff) ++#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff) ++#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f) ++#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f) ++#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1) ++#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1) ++ ++/* ++ * Layout of the fuses providing the calibration data ++ * These macros could be used for MT7622. ++ */ ++#define CALIB_BUF0_ADC_OE_V2(x) (((x) >> 22) & 0x3ff) ++#define CALIB_BUF0_ADC_GE_V2(x) (((x) >> 12) & 0x3ff) ++#define CALIB_BUF0_DEGC_CALI_V2(x) (((x) >> 6) & 0x3f) ++#define CALIB_BUF0_O_SLOPE_V2(x) (((x) >> 0) & 0x3f) ++#define CALIB_BUF1_VTS_TS1_V2(x) (((x) >> 23) & 0x1ff) ++#define CALIB_BUF1_VTS_TS2_V2(x) (((x) >> 14) & 0x1ff) ++#define CALIB_BUF1_VTS_TSABB_V2(x) (((x) >> 5) & 0x1ff) ++#define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) ++#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) ++ ++/* ++ * Layout of the fuses providing the calibration data ++ * These macros can be used for MT7981 and MT7986. ++ */ ++#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff) ++#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f) ++#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f) ++#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff) ++#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff) ++#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff) ++#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1) ++#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1) ++#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1) ++ ++enum { ++ VTS1, ++ VTS2, ++ VTS3, ++ VTS4, ++ VTS5, ++ VTSABB, ++ MAX_NUM_VTS, ++}; ++ ++enum mtk_thermal_version { ++ MTK_THERMAL_V1 = 1, ++ MTK_THERMAL_V2, ++ MTK_THERMAL_V3, ++}; ++ ++/* MT2701 thermal sensors */ ++#define MT2701_TS1 0 ++#define MT2701_TS2 1 ++#define MT2701_TSABB 2 ++ ++/* AUXADC channel 11 is used for the temperature sensors */ ++#define MT2701_TEMP_AUXADC_CHANNEL 11 ++ ++/* The total number of temperature sensors in the MT2701 */ ++#define MT2701_NUM_SENSORS 3 ++ ++/* The number of sensing points per bank */ ++#define MT2701_NUM_SENSORS_PER_ZONE 3 ++ ++/* The number of controller in the MT2701 */ ++#define MT2701_NUM_CONTROLLER 1 ++ ++/* The calibration coefficient of sensor */ ++#define MT2701_CALIBRATION 165 ++ ++/* MT2712 thermal sensors */ ++#define MT2712_TS1 0 ++#define MT2712_TS2 1 ++#define MT2712_TS3 2 ++#define MT2712_TS4 3 ++ ++/* AUXADC channel 11 is used for the temperature sensors */ ++#define MT2712_TEMP_AUXADC_CHANNEL 11 ++ ++/* The total number of temperature sensors in the MT2712 */ ++#define MT2712_NUM_SENSORS 4 ++ ++/* The number of sensing points per bank */ ++#define MT2712_NUM_SENSORS_PER_ZONE 4 ++ ++/* The number of controller in the MT2712 */ ++#define MT2712_NUM_CONTROLLER 1 ++ ++/* The calibration coefficient of sensor */ ++#define MT2712_CALIBRATION 165 ++ ++#define MT7622_TEMP_AUXADC_CHANNEL 11 ++#define MT7622_NUM_SENSORS 1 ++#define MT7622_NUM_ZONES 1 ++#define MT7622_NUM_SENSORS_PER_ZONE 1 ++#define MT7622_TS1 0 ++#define MT7622_NUM_CONTROLLER 1 ++ ++/* The maximum number of banks */ ++#define MAX_NUM_ZONES 8 ++ ++/* The calibration coefficient of sensor */ ++#define MT7622_CALIBRATION 165 ++ ++/* MT8183 thermal sensors */ ++#define MT8183_TS1 0 ++#define MT8183_TS2 1 ++#define MT8183_TS3 2 ++#define MT8183_TS4 3 ++#define MT8183_TS5 4 ++#define MT8183_TSABB 5 ++ ++/* AUXADC channel is used for the temperature sensors */ ++#define MT8183_TEMP_AUXADC_CHANNEL 11 ++ ++/* The total number of temperature sensors in the MT8183 */ ++#define MT8183_NUM_SENSORS 6 ++ ++/* The number of banks in the MT8183 */ ++#define MT8183_NUM_ZONES 1 ++ ++/* The number of sensing points per bank */ ++#define MT8183_NUM_SENSORS_PER_ZONE 6 ++ ++/* The number of controller in the MT8183 */ ++#define MT8183_NUM_CONTROLLER 2 ++ ++/* The calibration coefficient of sensor */ ++#define MT8183_CALIBRATION 153 ++ ++/* AUXADC channel 11 is used for the temperature sensors */ ++#define MT7986_TEMP_AUXADC_CHANNEL 11 ++ ++/* The total number of temperature sensors in the MT7986 */ ++#define MT7986_NUM_SENSORS 1 ++ ++/* The number of banks in the MT7986 */ ++#define MT7986_NUM_ZONES 1 ++ ++/* The number of sensing points per bank */ ++#define MT7986_NUM_SENSORS_PER_ZONE 1 ++ ++/* MT7986 thermal sensors */ ++#define MT7986_TS1 0 ++ ++/* The number of controller in the MT7986 */ ++#define MT7986_NUM_CONTROLLER 1 ++ ++/* The calibration coefficient of sensor */ ++#define MT7986_CALIBRATION 165 ++ ++struct mtk_thermal; ++ ++struct thermal_bank_cfg { ++ unsigned int num_sensors; ++ const int *sensors; ++}; ++ ++struct mtk_thermal_bank { ++ struct mtk_thermal *mt; ++ int id; ++}; ++ ++struct mtk_thermal_data { ++ s32 num_banks; ++ s32 num_sensors; ++ s32 auxadc_channel; ++ const int *vts_index; ++ const int *sensor_mux_values; ++ const int *msr; ++ const int *adcpnp; ++ const int cali_val; ++ const int num_controller; ++ const int *controller_offset; ++ bool need_switch_bank; ++ struct thermal_bank_cfg bank_data[MAX_NUM_ZONES]; ++ enum mtk_thermal_version version; ++}; ++ ++struct mtk_thermal { ++ struct device *dev; ++ void __iomem *thermal_base; ++ ++ struct clk *clk_peri_therm; ++ struct clk *clk_auxadc; ++ /* lock: for getting and putting banks */ ++ struct mutex lock; ++ ++ /* Calibration values */ ++ s32 adc_ge; ++ s32 adc_oe; ++ s32 degc_cali; ++ s32 o_slope; ++ s32 o_slope_sign; ++ s32 vts[MAX_NUM_VTS]; ++ ++ const struct mtk_thermal_data *conf; ++ struct mtk_thermal_bank banks[MAX_NUM_ZONES]; ++ ++ int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); ++}; ++ ++/* MT8183 thermal sensor data */ ++static const int mt8183_bank_data[MT8183_NUM_SENSORS] = { ++ MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB ++}; ++ ++static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = { ++ TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1 ++}; ++ ++static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = { ++ TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1, ++ TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1 ++}; ++ ++static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 }; ++static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100}; ++ ++static const int mt8183_vts_index[MT8183_NUM_SENSORS] = { ++ VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB ++}; ++ ++/* MT8173 thermal sensor data */ ++static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { ++ { MT8173_TS2, MT8173_TS3 }, ++ { MT8173_TS2, MT8173_TS4 }, ++ { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, ++ { MT8173_TS2 }, ++}; ++ ++static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { ++ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 ++}; ++ ++static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { ++ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 ++}; ++ ++static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; ++static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, }; ++ ++static const int mt8173_vts_index[MT8173_NUM_SENSORS] = { ++ VTS1, VTS2, VTS3, VTS4, VTSABB ++}; ++ ++/* MT2701 thermal sensor data */ ++static const int mt2701_bank_data[MT2701_NUM_SENSORS] = { ++ MT2701_TS1, MT2701_TS2, MT2701_TSABB ++}; ++ ++static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = { ++ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 ++}; ++ ++static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { ++ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 ++}; ++ ++static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; ++static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, }; ++ ++static const int mt2701_vts_index[MT2701_NUM_SENSORS] = { ++ VTS1, VTS2, VTS3 ++}; ++ ++/* MT2712 thermal sensor data */ ++static const int mt2712_bank_data[MT2712_NUM_SENSORS] = { ++ MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4 ++}; ++ ++static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = { ++ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 ++}; ++ ++static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = { ++ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 ++}; ++ ++static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 }; ++static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, }; ++ ++static const int mt2712_vts_index[MT2712_NUM_SENSORS] = { ++ VTS1, VTS2, VTS3, VTS4 ++}; ++ ++/* MT7622 thermal sensor data */ ++static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, }; ++static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; ++static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; ++static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, }; ++static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; ++static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; ++ ++/* MT7986 thermal sensor data */ ++static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, }; ++static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; ++static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; ++static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, }; ++static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; ++static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; ++ ++/* ++ * The MT8173 thermal controller has four banks. Each bank can read up to ++ * four temperature sensors simultaneously. The MT8173 has a total of 5 ++ * temperature sensors. We use each bank to measure a certain area of the ++ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple ++ * areas, hence is used in different banks. ++ * ++ * The thermal core only gets the maximum temperature of all banks, so ++ * the bank concept wouldn't be necessary here. However, the SVS (Smart ++ * Voltage Scaling) unit makes its decisions based on the same bank ++ * data, and this indeed needs the temperatures of the individual banks ++ * for making better decisions. ++ */ ++static const struct mtk_thermal_data mt8173_thermal_data = { ++ .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL, ++ .num_banks = MT8173_NUM_ZONES, ++ .num_sensors = MT8173_NUM_SENSORS, ++ .vts_index = mt8173_vts_index, ++ .cali_val = MT8173_CALIBRATION, ++ .num_controller = MT8173_NUM_CONTROLLER, ++ .controller_offset = mt8173_tc_offset, ++ .need_switch_bank = true, ++ .bank_data = { ++ { ++ .num_sensors = 2, ++ .sensors = mt8173_bank_data[0], ++ }, { ++ .num_sensors = 2, ++ .sensors = mt8173_bank_data[1], ++ }, { ++ .num_sensors = 3, ++ .sensors = mt8173_bank_data[2], ++ }, { ++ .num_sensors = 1, ++ .sensors = mt8173_bank_data[3], ++ }, ++ }, ++ .msr = mt8173_msr, ++ .adcpnp = mt8173_adcpnp, ++ .sensor_mux_values = mt8173_mux_values, ++ .version = MTK_THERMAL_V1, ++}; ++ ++/* ++ * The MT2701 thermal controller has one bank, which can read up to ++ * three temperature sensors simultaneously. The MT2701 has a total of 3 ++ * temperature sensors. ++ * ++ * The thermal core only gets the maximum temperature of this one bank, ++ * so the bank concept wouldn't be necessary here. However, the SVS (Smart ++ * Voltage Scaling) unit makes its decisions based on the same bank ++ * data. ++ */ ++static const struct mtk_thermal_data mt2701_thermal_data = { ++ .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL, ++ .num_banks = 1, ++ .num_sensors = MT2701_NUM_SENSORS, ++ .vts_index = mt2701_vts_index, ++ .cali_val = MT2701_CALIBRATION, ++ .num_controller = MT2701_NUM_CONTROLLER, ++ .controller_offset = mt2701_tc_offset, ++ .need_switch_bank = true, ++ .bank_data = { ++ { ++ .num_sensors = 3, ++ .sensors = mt2701_bank_data, ++ }, ++ }, ++ .msr = mt2701_msr, ++ .adcpnp = mt2701_adcpnp, ++ .sensor_mux_values = mt2701_mux_values, ++ .version = MTK_THERMAL_V1, ++}; ++ ++/* ++ * The MT2712 thermal controller has one bank, which can read up to ++ * four temperature sensors simultaneously. The MT2712 has a total of 4 ++ * temperature sensors. ++ * ++ * The thermal core only gets the maximum temperature of this one bank, ++ * so the bank concept wouldn't be necessary here. However, the SVS (Smart ++ * Voltage Scaling) unit makes its decisions based on the same bank ++ * data. ++ */ ++static const struct mtk_thermal_data mt2712_thermal_data = { ++ .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL, ++ .num_banks = 1, ++ .num_sensors = MT2712_NUM_SENSORS, ++ .vts_index = mt2712_vts_index, ++ .cali_val = MT2712_CALIBRATION, ++ .num_controller = MT2712_NUM_CONTROLLER, ++ .controller_offset = mt2712_tc_offset, ++ .need_switch_bank = true, ++ .bank_data = { ++ { ++ .num_sensors = 4, ++ .sensors = mt2712_bank_data, ++ }, ++ }, ++ .msr = mt2712_msr, ++ .adcpnp = mt2712_adcpnp, ++ .sensor_mux_values = mt2712_mux_values, ++ .version = MTK_THERMAL_V1, ++}; ++ ++/* ++ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data ++ * access. ++ */ ++static const struct mtk_thermal_data mt7622_thermal_data = { ++ .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL, ++ .num_banks = MT7622_NUM_ZONES, ++ .num_sensors = MT7622_NUM_SENSORS, ++ .vts_index = mt7622_vts_index, ++ .cali_val = MT7622_CALIBRATION, ++ .num_controller = MT7622_NUM_CONTROLLER, ++ .controller_offset = mt7622_tc_offset, ++ .need_switch_bank = true, ++ .bank_data = { ++ { ++ .num_sensors = 1, ++ .sensors = mt7622_bank_data, ++ }, ++ }, ++ .msr = mt7622_msr, ++ .adcpnp = mt7622_adcpnp, ++ .sensor_mux_values = mt7622_mux_values, ++ .version = MTK_THERMAL_V2, ++}; ++ ++/* ++ * The MT8183 thermal controller has one bank for the current SW framework. ++ * The MT8183 has a total of 6 temperature sensors. ++ * There are two thermal controller to control the six sensor. ++ * The first one bind 2 sensor, and the other bind 4 sensors. ++ * The thermal core only gets the maximum temperature of all sensor, so ++ * the bank concept wouldn't be necessary here. However, the SVS (Smart ++ * Voltage Scaling) unit makes its decisions based on the same bank ++ * data, and this indeed needs the temperatures of the individual banks ++ * for making better decisions. ++ */ ++static const struct mtk_thermal_data mt8183_thermal_data = { ++ .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL, ++ .num_banks = MT8183_NUM_ZONES, ++ .num_sensors = MT8183_NUM_SENSORS, ++ .vts_index = mt8183_vts_index, ++ .cali_val = MT8183_CALIBRATION, ++ .num_controller = MT8183_NUM_CONTROLLER, ++ .controller_offset = mt8183_tc_offset, ++ .need_switch_bank = false, ++ .bank_data = { ++ { ++ .num_sensors = 6, ++ .sensors = mt8183_bank_data, ++ }, ++ }, ++ ++ .msr = mt8183_msr, ++ .adcpnp = mt8183_adcpnp, ++ .sensor_mux_values = mt8183_mux_values, ++ .version = MTK_THERMAL_V1, ++}; ++ ++/* ++ * MT7986 uses AUXADC Channel 11 for raw data access. ++ */ ++static const struct mtk_thermal_data mt7986_thermal_data = { ++ .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL, ++ .num_banks = MT7986_NUM_ZONES, ++ .num_sensors = MT7986_NUM_SENSORS, ++ .vts_index = mt7986_vts_index, ++ .cali_val = MT7986_CALIBRATION, ++ .num_controller = MT7986_NUM_CONTROLLER, ++ .controller_offset = mt7986_tc_offset, ++ .need_switch_bank = true, ++ .bank_data = { ++ { ++ .num_sensors = 1, ++ .sensors = mt7986_bank_data, ++ }, ++ }, ++ .msr = mt7986_msr, ++ .adcpnp = mt7986_adcpnp, ++ .sensor_mux_values = mt7986_mux_values, ++ .version = MTK_THERMAL_V3, ++}; ++ ++/** ++ * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius ++ * @mt: The thermal controller ++ * @sensno: sensor number ++ * @raw: raw ADC value ++ * ++ * This converts the raw ADC value to mcelsius using the SoC specific ++ * calibration constants ++ */ ++static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw) ++{ ++ s32 tmp; ++ ++ raw &= 0xfff; ++ ++ tmp = 203450520 << 3; ++ tmp /= mt->conf->cali_val + mt->o_slope; ++ tmp /= 10000 + mt->adc_ge; ++ tmp *= raw - mt->vts[sensno] - 3350; ++ tmp >>= 3; ++ ++ return mt->degc_cali * 500 - tmp; ++} ++ ++static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw) ++{ ++ s32 format_1; ++ s32 format_2; ++ s32 g_oe; ++ s32 g_gain; ++ s32 g_x_roomt; ++ s32 tmp; ++ ++ if (raw == 0) ++ return 0; ++ ++ raw &= 0xfff; ++ g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12); ++ g_oe = mt->adc_oe - 512; ++ format_1 = mt->vts[VTS2] + 3105 - g_oe; ++ format_2 = (mt->degc_cali * 10) >> 1; ++ g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain; ++ ++ tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt; ++ tmp = tmp * 10 * 100 / 11; ++ ++ if (mt->o_slope_sign == 0) ++ tmp = tmp / (165 - mt->o_slope); ++ else ++ tmp = tmp / (165 + mt->o_slope); ++ ++ return (format_2 - tmp) * 100; ++} ++ ++static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw) ++{ ++ s32 tmp; ++ ++ if (raw == 0) ++ return 0; ++ ++ raw &= 0xfff; ++ tmp = 100000 * 15 / 16 * 10000; ++ tmp /= 4096 - 512 + mt->adc_ge; ++ tmp /= 1490; ++ tmp *= raw - mt->vts[sensno] - 2900; ++ ++ return mt->degc_cali * 500 - tmp; ++} ++ ++/** ++ * mtk_thermal_get_bank - get bank ++ * @bank: The bank ++ * ++ * The bank registers are banked, we have to select a bank in the ++ * PTPCORESEL register to access it. ++ */ ++static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank) ++{ ++ struct mtk_thermal *mt = bank->mt; ++ u32 val; ++ ++ if (mt->conf->need_switch_bank) { ++ mutex_lock(&mt->lock); ++ ++ val = readl(mt->thermal_base + PTPCORESEL); ++ val &= ~0xf; ++ val |= bank->id; ++ writel(val, mt->thermal_base + PTPCORESEL); ++ } ++} ++ ++/** ++ * mtk_thermal_put_bank - release bank ++ * @bank: The bank ++ * ++ * release a bank previously taken with mtk_thermal_get_bank, ++ */ ++static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) ++{ ++ struct mtk_thermal *mt = bank->mt; ++ ++ if (mt->conf->need_switch_bank) ++ mutex_unlock(&mt->lock); ++} ++ ++/** ++ * mtk_thermal_bank_temperature - get the temperature of a bank ++ * @bank: The bank ++ * ++ * The temperature of a bank is considered the maximum temperature of ++ * the sensors associated to the bank. ++ */ ++static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) ++{ ++ struct mtk_thermal *mt = bank->mt; ++ const struct mtk_thermal_data *conf = mt->conf; ++ int i, temp = INT_MIN, max = INT_MIN; ++ u32 raw; ++ ++ for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { ++ raw = readl(mt->thermal_base + conf->msr[i]); ++ ++ temp = mt->raw_to_mcelsius( ++ mt, conf->bank_data[bank->id].sensors[i], raw); ++ ++ ++ /* ++ * The first read of a sensor often contains very high bogus ++ * temperature value. Filter these out so that the system does ++ * not immediately shut down. ++ */ ++ if (temp > 200000) ++ temp = 0; ++ ++ if (temp > max) ++ max = temp; ++ } ++ ++ return max; ++} ++ ++static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature) ++{ ++ struct mtk_thermal *mt = tz->devdata; ++ int i; ++ int tempmax = INT_MIN; ++ ++ for (i = 0; i < mt->conf->num_banks; i++) { ++ struct mtk_thermal_bank *bank = &mt->banks[i]; ++ ++ mtk_thermal_get_bank(bank); ++ ++ tempmax = max(tempmax, mtk_thermal_bank_temperature(bank)); ++ ++ mtk_thermal_put_bank(bank); ++ } ++ ++ *temperature = tempmax; ++ ++ return 0; ++} ++ ++static const struct thermal_zone_device_ops mtk_thermal_ops = { ++ .get_temp = mtk_read_temp, ++}; ++ ++static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, ++ u32 apmixed_phys_base, u32 auxadc_phys_base, ++ int ctrl_id) ++{ ++ struct mtk_thermal_bank *bank = &mt->banks[num]; ++ const struct mtk_thermal_data *conf = mt->conf; ++ int i; ++ ++ int offset = mt->conf->controller_offset[ctrl_id]; ++ void __iomem *controller_base = mt->thermal_base + offset; ++ ++ bank->id = num; ++ bank->mt = mt; ++ ++ mtk_thermal_get_bank(bank); ++ ++ /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */ ++ writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1); ++ ++ /* ++ * filt interval is 1 * 46.540us = 46.54us, ++ * sen interval is 429 * 46.540us = 19.96ms ++ */ ++ writel(TEMP_MONCTL2_FILTER_INTERVAL(1) | ++ TEMP_MONCTL2_SENSOR_INTERVAL(429), ++ controller_base + TEMP_MONCTL2); ++ ++ /* poll is set to 10u */ ++ writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768), ++ controller_base + TEMP_AHBPOLL); ++ ++ /* temperature sampling control, 1 sample */ ++ writel(0x0, controller_base + TEMP_MSRCTL0); ++ ++ /* exceed this polling time, IRQ would be inserted */ ++ writel(0xffffffff, controller_base + TEMP_AHBTO); ++ ++ /* number of interrupts per event, 1 is enough */ ++ writel(0x0, controller_base + TEMP_MONIDET0); ++ writel(0x0, controller_base + TEMP_MONIDET1); ++ ++ /* ++ * The MT8173 thermal controller does not have its own ADC. Instead it ++ * uses AHB bus accesses to control the AUXADC. To do this the thermal ++ * controller has to be programmed with the physical addresses of the ++ * AUXADC registers and with the various bit positions in the AUXADC. ++ * Also the thermal controller controls a mux in the APMIXEDSYS register ++ * space. ++ */ ++ ++ /* ++ * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0) ++ * automatically by hw ++ */ ++ writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX); ++ ++ /* AHB address for auxadc mux selection */ ++ writel(auxadc_phys_base + AUXADC_CON1_CLR_V, ++ controller_base + TEMP_ADCMUXADDR); ++ ++ if (mt->conf->version == MTK_THERMAL_V1) { ++ /* AHB address for pnp sensor mux selection */ ++ writel(apmixed_phys_base + APMIXED_SYS_TS_CON1, ++ controller_base + TEMP_PNPMUXADDR); ++ } ++ ++ /* AHB value for auxadc enable */ ++ writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN); ++ ++ /* AHB address for auxadc enable (channel 0 immediate mode selected) */ ++ writel(auxadc_phys_base + AUXADC_CON1_SET_V, ++ controller_base + TEMP_ADCENADDR); ++ ++ /* AHB address for auxadc valid bit */ ++ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), ++ controller_base + TEMP_ADCVALIDADDR); ++ ++ /* AHB address for auxadc voltage output */ ++ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), ++ controller_base + TEMP_ADCVOLTADDR); ++ ++ /* read valid & voltage are at the same register */ ++ writel(0x0, controller_base + TEMP_RDCTRL); ++ ++ /* indicate where the valid bit is */ ++ writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12), ++ controller_base + TEMP_ADCVALIDMASK); ++ ++ /* no shift */ ++ writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT); ++ ++ /* enable auxadc mux write transaction */ ++ writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE, ++ controller_base + TEMP_ADCWRITECTRL); ++ ++ for (i = 0; i < conf->bank_data[num].num_sensors; i++) ++ writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]], ++ mt->thermal_base + conf->adcpnp[i]); ++ ++ writel((1 << conf->bank_data[num].num_sensors) - 1, ++ controller_base + TEMP_MONCTL0); ++ ++ writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | ++ TEMP_ADCWRITECTRL_ADC_MUX_WRITE, ++ controller_base + TEMP_ADCWRITECTRL); ++ ++ mtk_thermal_put_bank(bank); ++} ++ ++static u64 of_get_phys_base(struct device_node *np) ++{ ++ u64 size64; ++ const __be32 *regaddr_p; ++ ++ regaddr_p = of_get_address(np, 0, &size64, NULL); ++ if (!regaddr_p) ++ return OF_BAD_ADDR; ++ ++ return of_translate_address(np, regaddr_p); ++} ++ ++static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf) ++{ ++ int i; ++ ++ if (!(buf[0] & CALIB_BUF0_VALID_V1)) ++ return -EINVAL; ++ ++ mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]); ++ ++ for (i = 0; i < mt->conf->num_sensors; i++) { ++ switch (mt->conf->vts_index[i]) { ++ case VTS1: ++ mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]); ++ break; ++ case VTS2: ++ mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]); ++ break; ++ case VTS3: ++ mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]); ++ break; ++ case VTS4: ++ mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]); ++ break; ++ case VTS5: ++ mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]); ++ break; ++ case VTSABB: ++ mt->vts[VTSABB] = ++ CALIB_BUF2_VTS_TSABB_V1(buf[2]); ++ break; ++ default: ++ break; ++ } ++ } ++ ++ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]); ++ if (CALIB_BUF1_ID_V1(buf[1]) & ++ CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0])) ++ mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]); ++ else ++ mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]); ++ ++ return 0; ++} ++ ++static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf) ++{ ++ if (!CALIB_BUF1_VALID_V2(buf[1])) ++ return -EINVAL; ++ ++ mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]); ++ mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]); ++ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]); ++ mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]); ++ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]); ++ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]); ++ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]); ++ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]); ++ ++ return 0; ++} ++ ++static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf) ++{ ++ if (!CALIB_BUF1_VALID_V3(buf[1])) ++ return -EINVAL; ++ ++ mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]); ++ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]); ++ mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]); ++ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]); ++ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]); ++ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]); ++ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]); ++ ++ if (CALIB_BUF1_ID_V3(buf[1]) == 0) ++ mt->o_slope = 0; ++ ++ return 0; ++} ++ ++static int mtk_thermal_get_calibration_data(struct device *dev, ++ struct mtk_thermal *mt) ++{ ++ struct nvmem_cell *cell; ++ u32 *buf; ++ size_t len; ++ int i, ret = 0; ++ ++ /* Start with default values */ ++ mt->adc_ge = 512; ++ mt->adc_oe = 512; ++ for (i = 0; i < mt->conf->num_sensors; i++) ++ mt->vts[i] = 260; ++ mt->degc_cali = 40; ++ mt->o_slope = 0; ++ ++ cell = nvmem_cell_get(dev, "calibration-data"); ++ if (IS_ERR(cell)) { ++ if (PTR_ERR(cell) == -EPROBE_DEFER) ++ return PTR_ERR(cell); ++ return 0; ++ } ++ ++ buf = (u32 *)nvmem_cell_read(cell, &len); ++ ++ nvmem_cell_put(cell); ++ ++ if (IS_ERR(buf)) ++ return PTR_ERR(buf); ++ ++ if (len < 3 * sizeof(u32)) { ++ dev_warn(dev, "invalid calibration data\n"); ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ switch (mt->conf->version) { ++ case MTK_THERMAL_V1: ++ ret = mtk_thermal_extract_efuse_v1(mt, buf); ++ break; ++ case MTK_THERMAL_V2: ++ ret = mtk_thermal_extract_efuse_v2(mt, buf); ++ break; ++ case MTK_THERMAL_V3: ++ ret = mtk_thermal_extract_efuse_v3(mt, buf); ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ if (ret) { ++ dev_info(dev, "Device not calibrated, using default calibration values\n"); ++ ret = 0; ++ } ++ ++out: ++ kfree(buf); ++ ++ return ret; ++} ++ ++static const struct of_device_id mtk_thermal_of_match[] = { ++ { ++ .compatible = "mediatek,mt8173-thermal", ++ .data = (void *)&mt8173_thermal_data, ++ }, ++ { ++ .compatible = "mediatek,mt2701-thermal", ++ .data = (void *)&mt2701_thermal_data, ++ }, ++ { ++ .compatible = "mediatek,mt2712-thermal", ++ .data = (void *)&mt2712_thermal_data, ++ }, ++ { ++ .compatible = "mediatek,mt7622-thermal", ++ .data = (void *)&mt7622_thermal_data, ++ }, ++ { ++ .compatible = "mediatek,mt7986-thermal", ++ .data = (void *)&mt7986_thermal_data, ++ }, ++ { ++ .compatible = "mediatek,mt8183-thermal", ++ .data = (void *)&mt8183_thermal_data, ++ }, { ++ }, ++}; ++MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); ++ ++static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base) ++{ ++ int tmp; ++ ++ tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1); ++ tmp &= ~(0x37); ++ tmp |= 0x1; ++ writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1); ++ udelay(200); ++} ++ ++static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt, ++ void __iomem *auxadc_base) ++{ ++ int tmp; ++ ++ writel(0x800, auxadc_base + AUXADC_CON1_SET_V); ++ writel(0x1, mt->thermal_base + TEMP_MONCTL0); ++ tmp = readl(mt->thermal_base + TEMP_MSRCTL1); ++ writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1); ++} ++ ++static int mtk_thermal_probe(struct platform_device *pdev) ++{ ++ int ret, i, ctrl_id; ++ struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; ++ struct mtk_thermal *mt; ++ u64 auxadc_phys_base, apmixed_phys_base; ++ struct thermal_zone_device *tzdev; ++ void __iomem *apmixed_base, *auxadc_base; ++ ++ mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); ++ if (!mt) ++ return -ENOMEM; ++ ++ mt->conf = of_device_get_match_data(&pdev->dev); ++ ++ mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); ++ if (IS_ERR(mt->clk_peri_therm)) ++ return PTR_ERR(mt->clk_peri_therm); ++ ++ mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc"); ++ if (IS_ERR(mt->clk_auxadc)) ++ return PTR_ERR(mt->clk_auxadc); ++ ++ mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); ++ if (IS_ERR(mt->thermal_base)) ++ return PTR_ERR(mt->thermal_base); ++ ++ ret = mtk_thermal_get_calibration_data(&pdev->dev, mt); ++ if (ret) ++ return ret; ++ ++ mutex_init(&mt->lock); ++ ++ mt->dev = &pdev->dev; ++ ++ auxadc = of_parse_phandle(np, "mediatek,auxadc", 0); ++ if (!auxadc) { ++ dev_err(&pdev->dev, "missing auxadc node\n"); ++ return -ENODEV; ++ } ++ ++ auxadc_base = of_iomap(auxadc, 0); ++ auxadc_phys_base = of_get_phys_base(auxadc); ++ ++ of_node_put(auxadc); ++ ++ if (auxadc_phys_base == OF_BAD_ADDR) { ++ dev_err(&pdev->dev, "Can't get auxadc phys address\n"); ++ return -EINVAL; ++ } ++ ++ apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0); ++ if (!apmixedsys) { ++ dev_err(&pdev->dev, "missing apmixedsys node\n"); ++ return -ENODEV; ++ } ++ ++ apmixed_base = of_iomap(apmixedsys, 0); ++ apmixed_phys_base = of_get_phys_base(apmixedsys); ++ ++ of_node_put(apmixedsys); ++ ++ if (apmixed_phys_base == OF_BAD_ADDR) { ++ dev_err(&pdev->dev, "Can't get auxadc phys address\n"); ++ return -EINVAL; ++ } ++ ++ ret = device_reset_optional(&pdev->dev); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(mt->clk_auxadc); ++ if (ret) { ++ dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); ++ return ret; ++ } ++ ++ ret = clk_prepare_enable(mt->clk_peri_therm); ++ if (ret) { ++ dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); ++ goto err_disable_clk_auxadc; ++ } ++ ++ if (mt->conf->version != MTK_THERMAL_V1) { ++ mtk_thermal_turn_on_buffer(apmixed_base); ++ mtk_thermal_release_periodic_ts(mt, auxadc_base); ++ } ++ ++ if (mt->conf->version == MTK_THERMAL_V1) ++ mt->raw_to_mcelsius = raw_to_mcelsius_v1; ++ else if (mt->conf->version == MTK_THERMAL_V2) ++ mt->raw_to_mcelsius = raw_to_mcelsius_v2; ++ else ++ mt->raw_to_mcelsius = raw_to_mcelsius_v3; ++ ++ for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) ++ for (i = 0; i < mt->conf->num_banks; i++) ++ mtk_thermal_init_bank(mt, i, apmixed_phys_base, ++ auxadc_phys_base, ctrl_id); ++ ++ platform_set_drvdata(pdev, mt); ++ ++ tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, ++ &mtk_thermal_ops); ++ if (IS_ERR(tzdev)) { ++ ret = PTR_ERR(tzdev); ++ goto err_disable_clk_peri_therm; ++ } ++ ++ ret = devm_thermal_add_hwmon_sysfs(tzdev); ++ if (ret) ++ dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs"); ++ ++ return 0; ++ ++err_disable_clk_peri_therm: ++ clk_disable_unprepare(mt->clk_peri_therm); ++err_disable_clk_auxadc: ++ clk_disable_unprepare(mt->clk_auxadc); ++ ++ return ret; ++} ++ ++static int mtk_thermal_remove(struct platform_device *pdev) ++{ ++ struct mtk_thermal *mt = platform_get_drvdata(pdev); ++ ++ clk_disable_unprepare(mt->clk_peri_therm); ++ clk_disable_unprepare(mt->clk_auxadc); ++ ++ return 0; ++} ++ ++static struct platform_driver mtk_thermal_driver = { ++ .probe = mtk_thermal_probe, ++ .remove = mtk_thermal_remove, ++ .driver = { ++ .name = "mtk-thermal", ++ .of_match_table = mtk_thermal_of_match, ++ }, ++}; ++ ++module_platform_driver(mtk_thermal_driver); ++ ++MODULE_AUTHOR("Michael Kao "); ++MODULE_AUTHOR("Louis Yu "); ++MODULE_AUTHOR("Dawei Chien "); ++MODULE_AUTHOR("Sascha Hauer "); ++MODULE_AUTHOR("Hanyi Wu "); ++MODULE_DESCRIPTION("Mediatek thermal driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch b/target/linux/mediatek/patches-6.1/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch new file mode 100644 index 0000000000..2ae3734e40 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch @@ -0,0 +1,1298 @@ +From 325fadf27b21f7d79843c3cc282b7f3e6620ad3d Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Thu, 9 Feb 2023 11:56:26 +0100 +Subject: [PATCH 06/42] thermal/drivers/mediatek: Add the Low Voltage Thermal + Sensor driver + +The Low Voltage Thermal Sensor (LVTS) is a multiple sensors, multi +controllers contained in a thermal domain. + +A thermal domains can be the MCU or the AP. + +Each thermal domains contain up to seven controllers, each thermal +controller handle up to four thermal sensors. + +The LVTS has two Finite State Machines (FSM), one to handle the +functionin temperatures range like hot or cold temperature and another +one to handle monitoring trip point. The FSM notifies via interrupts +when a trip point is crossed. + +The interrupt is managed at the thermal controller level, so when an +interrupt occurs, the driver has to find out which sensor triggered +such an interrupt. + +The sampling of the thermal can be filtered or immediate. For the +former, the LVTS measures several points and applies a low pass +filter. + +Signed-off-by: Balsam CHIHI +Reviewed-by: AngeloGioacchino Del Regno + +On MT8195 Tomato Chromebook: + +Tested-by: AngeloGioacchino Del Regno +Link: https://lore.kernel.org/r/20230209105628.50294-5-bchihi@baylibre.com +Signed-off-by: Daniel Lezcano +Signed-off-by: Rafael J. Wysocki +--- + drivers/thermal/mediatek/Kconfig | 16 + + drivers/thermal/mediatek/Makefile | 1 + + drivers/thermal/mediatek/lvts_thermal.c | 1224 +++++++++++++++++++++++ + 3 files changed, 1241 insertions(+) + create mode 100644 drivers/thermal/mediatek/lvts_thermal.c + +--- a/drivers/thermal/mediatek/Kconfig ++++ b/drivers/thermal/mediatek/Kconfig +@@ -18,4 +18,20 @@ config MTK_SOC_THERMAL + This driver configures thermal controllers to collect + temperature via AUXADC interface. + ++config MTK_LVTS_THERMAL ++ tristate "LVTS Thermal Driver for MediaTek SoCs" ++ depends on HAS_IOMEM ++ help ++ Enable this option if you want to get SoC temperature ++ information for supported MediaTek platforms. ++ This driver configures LVTS (Low Voltage Thermal Sensor) ++ thermal controllers to collect temperatures via ASIF ++ (Analog Serial Interface). ++ ++config MTK_LVTS_THERMAL_DEBUGFS ++ bool "LVTS thermal debugfs" ++ depends on MTK_LVTS_THERMAL && DEBUG_FS ++ help ++ Enable this option to debug the internals of the device driver. ++ + endif +--- a/drivers/thermal/mediatek/Makefile ++++ b/drivers/thermal/mediatek/Makefile +@@ -1 +1,2 @@ + obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o ++obj-$(CONFIG_MTK_LVTS_THERMAL) += lvts_thermal.o +--- /dev/null ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -0,0 +1,1224 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Copyright (c) 2023 MediaTek Inc. ++ * Author: Balsam CHIHI ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define LVTS_MONCTL0(__base) (__base + 0x0000) ++#define LVTS_MONCTL1(__base) (__base + 0x0004) ++#define LVTS_MONCTL2(__base) (__base + 0x0008) ++#define LVTS_MONINT(__base) (__base + 0x000C) ++#define LVTS_MONINTSTS(__base) (__base + 0x0010) ++#define LVTS_MONIDET0(__base) (__base + 0x0014) ++#define LVTS_MONIDET1(__base) (__base + 0x0018) ++#define LVTS_MONIDET2(__base) (__base + 0x001C) ++#define LVTS_MONIDET3(__base) (__base + 0x0020) ++#define LVTS_H2NTHRE(__base) (__base + 0x0024) ++#define LVTS_HTHRE(__base) (__base + 0x0028) ++#define LVTS_OFFSETH(__base) (__base + 0x0030) ++#define LVTS_OFFSETL(__base) (__base + 0x0034) ++#define LVTS_MSRCTL0(__base) (__base + 0x0038) ++#define LVTS_MSRCTL1(__base) (__base + 0x003C) ++#define LVTS_TSSEL(__base) (__base + 0x0040) ++#define LVTS_CALSCALE(__base) (__base + 0x0048) ++#define LVTS_ID(__base) (__base + 0x004C) ++#define LVTS_CONFIG(__base) (__base + 0x0050) ++#define LVTS_EDATA00(__base) (__base + 0x0054) ++#define LVTS_EDATA01(__base) (__base + 0x0058) ++#define LVTS_EDATA02(__base) (__base + 0x005C) ++#define LVTS_EDATA03(__base) (__base + 0x0060) ++#define LVTS_MSR0(__base) (__base + 0x0090) ++#define LVTS_MSR1(__base) (__base + 0x0094) ++#define LVTS_MSR2(__base) (__base + 0x0098) ++#define LVTS_MSR3(__base) (__base + 0x009C) ++#define LVTS_IMMD0(__base) (__base + 0x00A0) ++#define LVTS_IMMD1(__base) (__base + 0x00A4) ++#define LVTS_IMMD2(__base) (__base + 0x00A8) ++#define LVTS_IMMD3(__base) (__base + 0x00AC) ++#define LVTS_PROTCTL(__base) (__base + 0x00C0) ++#define LVTS_PROTTA(__base) (__base + 0x00C4) ++#define LVTS_PROTTB(__base) (__base + 0x00C8) ++#define LVTS_PROTTC(__base) (__base + 0x00CC) ++#define LVTS_CLKEN(__base) (__base + 0x00E4) ++ ++#define LVTS_PERIOD_UNIT ((118 * 1000) / (256 * 38)) ++#define LVTS_GROUP_INTERVAL 1 ++#define LVTS_FILTER_INTERVAL 1 ++#define LVTS_SENSOR_INTERVAL 1 ++#define LVTS_HW_FILTER 0x2 ++#define LVTS_TSSEL_CONF 0x13121110 ++#define LVTS_CALSCALE_CONF 0x300 ++#define LVTS_MONINT_CONF 0x9FBF7BDE ++ ++#define LVTS_INT_SENSOR0 0x0009001F ++#define LVTS_INT_SENSOR1 0X000881F0 ++#define LVTS_INT_SENSOR2 0x00247C00 ++#define LVTS_INT_SENSOR3 0x1FC00000 ++ ++#define LVTS_SENSOR_MAX 4 ++#define LVTS_GOLDEN_TEMP_MAX 62 ++#define LVTS_GOLDEN_TEMP_DEFAULT 50 ++#define LVTS_COEFF_A -250460 ++#define LVTS_COEFF_B 250460 ++ ++#define LVTS_MSR_IMMEDIATE_MODE 0 ++#define LVTS_MSR_FILTERED_MODE 1 ++ ++#define LVTS_HW_SHUTDOWN_MT8195 105000 ++ ++static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; ++static int coeff_b = LVTS_COEFF_B; ++ ++struct lvts_sensor_data { ++ int dt_id; ++}; ++ ++struct lvts_ctrl_data { ++ struct lvts_sensor_data lvts_sensor[LVTS_SENSOR_MAX]; ++ int cal_offset[LVTS_SENSOR_MAX]; ++ int hw_tshut_temp; ++ int num_lvts_sensor; ++ int offset; ++ int mode; ++}; ++ ++struct lvts_data { ++ const struct lvts_ctrl_data *lvts_ctrl; ++ int num_lvts_ctrl; ++}; ++ ++struct lvts_sensor { ++ struct thermal_zone_device *tz; ++ void __iomem *msr; ++ void __iomem *base; ++ int id; ++ int dt_id; ++}; ++ ++struct lvts_ctrl { ++ struct lvts_sensor sensors[LVTS_SENSOR_MAX]; ++ u32 calibration[LVTS_SENSOR_MAX]; ++ u32 hw_tshut_raw_temp; ++ int num_lvts_sensor; ++ int mode; ++ void __iomem *base; ++}; ++ ++struct lvts_domain { ++ struct lvts_ctrl *lvts_ctrl; ++ struct reset_control *reset; ++ struct clk *clk; ++ int num_lvts_ctrl; ++ void __iomem *base; ++ size_t calib_len; ++ u8 *calib; ++#ifdef CONFIG_DEBUG_FS ++ struct dentry *dom_dentry; ++#endif ++}; ++ ++#ifdef CONFIG_MTK_LVTS_THERMAL_DEBUGFS ++ ++#define LVTS_DEBUG_FS_REGS(__reg) \ ++{ \ ++ .name = __stringify(__reg), \ ++ .offset = __reg(0), \ ++} ++ ++static const struct debugfs_reg32 lvts_regs[] = { ++ LVTS_DEBUG_FS_REGS(LVTS_MONCTL0), ++ LVTS_DEBUG_FS_REGS(LVTS_MONCTL1), ++ LVTS_DEBUG_FS_REGS(LVTS_MONCTL2), ++ LVTS_DEBUG_FS_REGS(LVTS_MONINT), ++ LVTS_DEBUG_FS_REGS(LVTS_MONINTSTS), ++ LVTS_DEBUG_FS_REGS(LVTS_MONIDET0), ++ LVTS_DEBUG_FS_REGS(LVTS_MONIDET1), ++ LVTS_DEBUG_FS_REGS(LVTS_MONIDET2), ++ LVTS_DEBUG_FS_REGS(LVTS_MONIDET3), ++ LVTS_DEBUG_FS_REGS(LVTS_H2NTHRE), ++ LVTS_DEBUG_FS_REGS(LVTS_HTHRE), ++ LVTS_DEBUG_FS_REGS(LVTS_OFFSETH), ++ LVTS_DEBUG_FS_REGS(LVTS_OFFSETL), ++ LVTS_DEBUG_FS_REGS(LVTS_MSRCTL0), ++ LVTS_DEBUG_FS_REGS(LVTS_MSRCTL1), ++ LVTS_DEBUG_FS_REGS(LVTS_TSSEL), ++ LVTS_DEBUG_FS_REGS(LVTS_CALSCALE), ++ LVTS_DEBUG_FS_REGS(LVTS_ID), ++ LVTS_DEBUG_FS_REGS(LVTS_CONFIG), ++ LVTS_DEBUG_FS_REGS(LVTS_EDATA00), ++ LVTS_DEBUG_FS_REGS(LVTS_EDATA01), ++ LVTS_DEBUG_FS_REGS(LVTS_EDATA02), ++ LVTS_DEBUG_FS_REGS(LVTS_EDATA03), ++ LVTS_DEBUG_FS_REGS(LVTS_MSR0), ++ LVTS_DEBUG_FS_REGS(LVTS_MSR1), ++ LVTS_DEBUG_FS_REGS(LVTS_MSR2), ++ LVTS_DEBUG_FS_REGS(LVTS_MSR3), ++ LVTS_DEBUG_FS_REGS(LVTS_IMMD0), ++ LVTS_DEBUG_FS_REGS(LVTS_IMMD1), ++ LVTS_DEBUG_FS_REGS(LVTS_IMMD2), ++ LVTS_DEBUG_FS_REGS(LVTS_IMMD3), ++ LVTS_DEBUG_FS_REGS(LVTS_PROTCTL), ++ LVTS_DEBUG_FS_REGS(LVTS_PROTTA), ++ LVTS_DEBUG_FS_REGS(LVTS_PROTTB), ++ LVTS_DEBUG_FS_REGS(LVTS_PROTTC), ++ LVTS_DEBUG_FS_REGS(LVTS_CLKEN), ++}; ++ ++static int lvts_debugfs_init(struct device *dev, struct lvts_domain *lvts_td) ++{ ++ struct debugfs_regset32 *regset; ++ struct lvts_ctrl *lvts_ctrl; ++ struct dentry *dentry; ++ char name[64]; ++ int i; ++ ++ lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL); ++ if (!lvts_td->dom_dentry) ++ return 0; ++ ++ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { ++ ++ lvts_ctrl = &lvts_td->lvts_ctrl[i]; ++ ++ sprintf(name, "controller%d", i); ++ dentry = debugfs_create_dir(name, lvts_td->dom_dentry); ++ if (!dentry) ++ continue; ++ ++ regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL); ++ if (!regset) ++ continue; ++ ++ regset->base = lvts_ctrl->base; ++ regset->regs = lvts_regs; ++ regset->nregs = ARRAY_SIZE(lvts_regs); ++ ++ debugfs_create_regset32("registers", 0400, dentry, regset); ++ } ++ ++ return 0; ++} ++ ++static void lvts_debugfs_exit(struct lvts_domain *lvts_td) ++{ ++ debugfs_remove_recursive(lvts_td->dom_dentry); ++} ++ ++#else ++ ++static inline int lvts_debugfs_init(struct device *dev, ++ struct lvts_domain *lvts_td) ++{ ++ return 0; ++} ++ ++static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { } ++ ++#endif ++ ++static int lvts_raw_to_temp(u32 raw_temp) ++{ ++ int temperature; ++ ++ temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14; ++ temperature += coeff_b; ++ ++ return temperature; ++} ++ ++static u32 lvts_temp_to_raw(int temperature) ++{ ++ u32 raw_temp = ((s64)(coeff_b - temperature)) << 14; ++ ++ raw_temp = div_s64(raw_temp, -LVTS_COEFF_A); ++ ++ return raw_temp; ++} ++ ++static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) ++{ ++ struct lvts_sensor *lvts_sensor = tz->devdata; ++ void __iomem *msr = lvts_sensor->msr; ++ u32 value; ++ ++ /* ++ * Measurement registers: ++ * ++ * LVTS_MSR[0-3] / LVTS_IMMD[0-3] ++ * ++ * Bits: ++ * ++ * 32-17: Unused ++ * 16 : Valid temperature ++ * 15-0 : Raw temperature ++ */ ++ value = readl(msr); ++ ++ /* ++ * As the thermal zone temperature will read before the ++ * hardware sensor is fully initialized, we have to check the ++ * validity of the temperature returned when reading the ++ * measurement register. The thermal controller will set the ++ * valid bit temperature only when it is totally initialized. ++ * ++ * Otherwise, we may end up with garbage values out of the ++ * functionning temperature and directly jump to a system ++ * shutdown. ++ */ ++ if (!(value & BIT(16))) ++ return -EAGAIN; ++ ++ *temp = lvts_raw_to_temp(value & 0xFFFF); ++ ++ return 0; ++} ++ ++static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) ++{ ++ struct lvts_sensor *lvts_sensor = tz->devdata; ++ void __iomem *base = lvts_sensor->base; ++ u32 raw_low = lvts_temp_to_raw(low); ++ u32 raw_high = lvts_temp_to_raw(high); ++ ++ /* ++ * Hot to normal temperature threshold ++ * ++ * LVTS_H2NTHRE ++ * ++ * Bits: ++ * ++ * 14-0 : Raw temperature for threshold ++ */ ++ if (low != -INT_MAX) { ++ dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low); ++ writel(raw_low, LVTS_H2NTHRE(base)); ++ } ++ ++ /* ++ * Hot temperature threshold ++ * ++ * LVTS_HTHRE ++ * ++ * Bits: ++ * ++ * 14-0 : Raw temperature for threshold ++ */ ++ dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high); ++ writel(raw_high, LVTS_HTHRE(base)); ++ ++ return 0; ++} ++ ++static irqreturn_t lvts_ctrl_irq_handler(struct lvts_ctrl *lvts_ctrl) ++{ ++ irqreturn_t iret = IRQ_NONE; ++ u32 value; ++ u32 masks[] = { ++ LVTS_INT_SENSOR0, ++ LVTS_INT_SENSOR1, ++ LVTS_INT_SENSOR2, ++ LVTS_INT_SENSOR3 ++ }; ++ int i; ++ ++ /* ++ * Interrupt monitoring status ++ * ++ * LVTS_MONINTST ++ * ++ * Bits: ++ * ++ * 31 : Interrupt for stage 3 ++ * 30 : Interrupt for stage 2 ++ * 29 : Interrupt for state 1 ++ * 28 : Interrupt using filter on sensor 3 ++ * ++ * 27 : Interrupt using immediate on sensor 3 ++ * 26 : Interrupt normal to hot on sensor 3 ++ * 25 : Interrupt high offset on sensor 3 ++ * 24 : Interrupt low offset on sensor 3 ++ * ++ * 23 : Interrupt hot threshold on sensor 3 ++ * 22 : Interrupt cold threshold on sensor 3 ++ * 21 : Interrupt using filter on sensor 2 ++ * 20 : Interrupt using filter on sensor 1 ++ * ++ * 19 : Interrupt using filter on sensor 0 ++ * 18 : Interrupt using immediate on sensor 2 ++ * 17 : Interrupt using immediate on sensor 1 ++ * 16 : Interrupt using immediate on sensor 0 ++ * ++ * 15 : Interrupt device access timeout interrupt ++ * 14 : Interrupt normal to hot on sensor 2 ++ * 13 : Interrupt high offset interrupt on sensor 2 ++ * 12 : Interrupt low offset interrupt on sensor 2 ++ * ++ * 11 : Interrupt hot threshold on sensor 2 ++ * 10 : Interrupt cold threshold on sensor 2 ++ * 9 : Interrupt normal to hot on sensor 1 ++ * 8 : Interrupt high offset interrupt on sensor 1 ++ * ++ * 7 : Interrupt low offset interrupt on sensor 1 ++ * 6 : Interrupt hot threshold on sensor 1 ++ * 5 : Interrupt cold threshold on sensor 1 ++ * 4 : Interrupt normal to hot on sensor 0 ++ * ++ * 3 : Interrupt high offset interrupt on sensor 0 ++ * 2 : Interrupt low offset interrupt on sensor 0 ++ * 1 : Interrupt hot threshold on sensor 0 ++ * 0 : Interrupt cold threshold on sensor 0 ++ * ++ * We are interested in the sensor(s) responsible of the ++ * interrupt event. We update the thermal framework with the ++ * thermal zone associated with the sensor. The framework will ++ * take care of the rest whatever the kind of interrupt, we ++ * are only interested in which sensor raised the interrupt. ++ * ++ * sensor 3 interrupt: 0001 1111 1100 0000 0000 0000 0000 0000 ++ * => 0x1FC00000 ++ * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000 ++ * => 0x00247C00 ++ * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000 ++ * => 0X000881F0 ++ * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111 ++ * => 0x0009001F ++ */ ++ value = readl(LVTS_MONINTSTS(lvts_ctrl->base)); ++ ++ /* ++ * Let's figure out which sensors raised the interrupt ++ * ++ * NOTE: the masks array must be ordered with the index ++ * corresponding to the sensor id eg. index=0, mask for ++ * sensor0. ++ */ ++ for (i = 0; i < ARRAY_SIZE(masks); i++) { ++ ++ if (!(value & masks[i])) ++ continue; ++ ++ thermal_zone_device_update(lvts_ctrl->sensors[i].tz, ++ THERMAL_TRIP_VIOLATED); ++ iret = IRQ_HANDLED; ++ } ++ ++ /* ++ * Write back to clear the interrupt status (W1C) ++ */ ++ writel(value, LVTS_MONINTSTS(lvts_ctrl->base)); ++ ++ return iret; ++} ++ ++/* ++ * Temperature interrupt handler. Even if the driver supports more ++ * interrupt modes, we use the interrupt when the temperature crosses ++ * the hot threshold the way up and the way down (modulo the ++ * hysteresis). ++ * ++ * Each thermal domain has a couple of interrupts, one for hardware ++ * reset and another one for all the thermal events happening on the ++ * different sensors. ++ * ++ * The interrupt is configured for thermal events when crossing the ++ * hot temperature limit. At each interrupt, we check in every ++ * controller if there is an interrupt pending. ++ */ ++static irqreturn_t lvts_irq_handler(int irq, void *data) ++{ ++ struct lvts_domain *lvts_td = data; ++ irqreturn_t aux, iret = IRQ_NONE; ++ int i; ++ ++ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { ++ ++ aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl); ++ if (aux != IRQ_HANDLED) ++ continue; ++ ++ iret = IRQ_HANDLED; ++ } ++ ++ return iret; ++} ++ ++static struct thermal_zone_device_ops lvts_ops = { ++ .get_temp = lvts_get_temp, ++ .set_trips = lvts_set_trips, ++}; ++ ++static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, ++ const struct lvts_ctrl_data *lvts_ctrl_data) ++{ ++ struct lvts_sensor *lvts_sensor = lvts_ctrl->sensors; ++ void __iomem *msr_regs[] = { ++ LVTS_MSR0(lvts_ctrl->base), ++ LVTS_MSR1(lvts_ctrl->base), ++ LVTS_MSR2(lvts_ctrl->base), ++ LVTS_MSR3(lvts_ctrl->base) ++ }; ++ ++ void __iomem *imm_regs[] = { ++ LVTS_IMMD0(lvts_ctrl->base), ++ LVTS_IMMD1(lvts_ctrl->base), ++ LVTS_IMMD2(lvts_ctrl->base), ++ LVTS_IMMD3(lvts_ctrl->base) ++ }; ++ ++ int i; ++ ++ for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) { ++ ++ int dt_id = lvts_ctrl_data->lvts_sensor[i].dt_id; ++ ++ /* ++ * At this point, we don't know which id matches which ++ * sensor. Let's set arbitrally the id from the index. ++ */ ++ lvts_sensor[i].id = i; ++ ++ /* ++ * The thermal zone registration will set the trip ++ * point interrupt in the thermal controller ++ * register. But this one will be reset in the ++ * initialization after. So we need to post pone the ++ * thermal zone creation after the controller is ++ * setup. For this reason, we store the device tree ++ * node id from the data in the sensor structure ++ */ ++ lvts_sensor[i].dt_id = dt_id; ++ ++ /* ++ * We assign the base address of the thermal ++ * controller as a back pointer. So it will be ++ * accessible from the different thermal framework ops ++ * as we pass the lvts_sensor pointer as thermal zone ++ * private data. ++ */ ++ lvts_sensor[i].base = lvts_ctrl->base; ++ ++ /* ++ * Each sensor has its own register address to read from. ++ */ ++ lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ? ++ imm_regs[i] : msr_regs[i]; ++ }; ++ ++ lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor; ++ ++ return 0; ++} ++ ++/* ++ * The efuse blob values follows the sensor enumeration per thermal ++ * controller. The decoding of the stream is as follow: ++ * ++ * <--?-> <----big0 ???---> <-sensor0-> <-0-> ++ * ------------------------------------------ ++ * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 | ++ * ------------------------------------------ ++ * ++ * <--sensor1--><-0-> <----big1 ???---> <-sen ++ * ------------------------------------------ ++ * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD | ++ * ------------------------------------------ ++ * ++ * sor0-> <-0-> <-sensor1-> <-0-> .......... ++ * ------------------------------------------ ++ * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD | ++ * ------------------------------------------ ++ * ++ * And so on ... ++ * ++ * The data description gives the offset of the calibration data in ++ * this bytes stream for each sensor. ++ * ++ * Each thermal controller can handle up to 4 sensors max, we don't ++ * care if there are less as the array of calibration is sized to 4 ++ * anyway. The unused sensor slot will be zeroed. ++ */ ++static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, ++ const struct lvts_ctrl_data *lvts_ctrl_data, ++ u8 *efuse_calibration) ++{ ++ int i; ++ ++ for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) ++ memcpy(&lvts_ctrl->calibration[i], ++ efuse_calibration + lvts_ctrl_data->cal_offset[i], 2); ++ ++ return 0; ++} ++ ++/* ++ * The efuse bytes stream can be split into different chunk of ++ * nvmems. This function reads and concatenate those into a single ++ * buffer so it can be read sequentially when initializing the ++ * calibration data. ++ */ ++static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td, ++ const struct lvts_data *lvts_data) ++{ ++ struct device_node *np = dev_of_node(dev); ++ struct nvmem_cell *cell; ++ struct property *prop; ++ const char *cell_name; ++ ++ of_property_for_each_string(np, "nvmem-cell-names", prop, cell_name) { ++ size_t len; ++ u8 *efuse; ++ ++ cell = of_nvmem_cell_get(np, cell_name); ++ if (IS_ERR(cell)) { ++ dev_err(dev, "Failed to get cell '%s'\n", cell_name); ++ return PTR_ERR(cell); ++ } ++ ++ efuse = nvmem_cell_read(cell, &len); ++ ++ nvmem_cell_put(cell); ++ ++ if (IS_ERR(efuse)) { ++ dev_err(dev, "Failed to read cell '%s'\n", cell_name); ++ return PTR_ERR(efuse); ++ } ++ ++ lvts_td->calib = devm_krealloc(dev, lvts_td->calib, ++ lvts_td->calib_len + len, GFP_KERNEL); ++ if (!lvts_td->calib) ++ return -ENOMEM; ++ ++ memcpy(lvts_td->calib + lvts_td->calib_len, efuse, len); ++ ++ lvts_td->calib_len += len; ++ ++ kfree(efuse); ++ } ++ ++ return 0; ++} ++ ++static int lvts_golden_temp_init(struct device *dev, u32 *value) ++{ ++ u32 gt; ++ ++ gt = (*value) >> 24; ++ ++ if (gt && gt < LVTS_GOLDEN_TEMP_MAX) ++ golden_temp = gt; ++ ++ coeff_b = golden_temp * 500 + LVTS_COEFF_B; ++ ++ return 0; ++} ++ ++static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td, ++ const struct lvts_data *lvts_data) ++{ ++ size_t size = sizeof(*lvts_td->lvts_ctrl) * lvts_data->num_lvts_ctrl; ++ struct lvts_ctrl *lvts_ctrl; ++ int i, ret; ++ ++ /* ++ * Create the calibration bytes stream from efuse data ++ */ ++ ret = lvts_calibration_read(dev, lvts_td, lvts_data); ++ if (ret) ++ return ret; ++ ++ /* ++ * The golden temp information is contained in the first chunk ++ * of efuse data. ++ */ ++ ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib); ++ if (ret) ++ return ret; ++ ++ lvts_ctrl = devm_kzalloc(dev, size, GFP_KERNEL); ++ if (!lvts_ctrl) ++ return -ENOMEM; ++ ++ for (i = 0; i < lvts_data->num_lvts_ctrl; i++) { ++ ++ lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset; ++ ++ ret = lvts_sensor_init(dev, &lvts_ctrl[i], ++ &lvts_data->lvts_ctrl[i]); ++ if (ret) ++ return ret; ++ ++ ret = lvts_calibration_init(dev, &lvts_ctrl[i], ++ &lvts_data->lvts_ctrl[i], ++ lvts_td->calib); ++ if (ret) ++ return ret; ++ ++ /* ++ * The mode the ctrl will use to read the temperature ++ * (filtered or immediate) ++ */ ++ lvts_ctrl[i].mode = lvts_data->lvts_ctrl[i].mode; ++ ++ /* ++ * The temperature to raw temperature must be done ++ * after initializing the calibration. ++ */ ++ lvts_ctrl[i].hw_tshut_raw_temp = ++ lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp); ++ } ++ ++ /* ++ * We no longer need the efuse bytes stream, let's free it ++ */ ++ devm_kfree(dev, lvts_td->calib); ++ ++ lvts_td->lvts_ctrl = lvts_ctrl; ++ lvts_td->num_lvts_ctrl = lvts_data->num_lvts_ctrl; ++ ++ return 0; ++} ++ ++/* ++ * At this point the configuration register is the only place in the ++ * driver where we write multiple values. Per hardware constraint, ++ * each write in the configuration register must be separated by a ++ * delay of 2 us. ++ */ ++static void lvts_write_config(struct lvts_ctrl *lvts_ctrl, u32 *cmds, int nr_cmds) ++{ ++ int i; ++ ++ /* ++ * Configuration register ++ */ ++ for (i = 0; i < nr_cmds; i++) { ++ writel(cmds[i], LVTS_CONFIG(lvts_ctrl->base)); ++ usleep_range(2, 4); ++ } ++} ++ ++static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl) ++{ ++ /* ++ * LVTS_PROTCTL : Thermal Protection Sensor Selection ++ * ++ * Bits: ++ * ++ * 19-18 : Sensor to base the protection on ++ * 17-16 : Strategy: ++ * 00 : Average of 4 sensors ++ * 01 : Max of 4 sensors ++ * 10 : Selected sensor with bits 19-18 ++ * 11 : Reserved ++ */ ++ writel(BIT(16), LVTS_PROTCTL(lvts_ctrl->base)); ++ ++ /* ++ * LVTS_PROTTA : Stage 1 temperature threshold ++ * LVTS_PROTTB : Stage 2 temperature threshold ++ * LVTS_PROTTC : Stage 3 temperature threshold ++ * ++ * Bits: ++ * ++ * 14-0: Raw temperature threshold ++ * ++ * writel(0x0, LVTS_PROTTA(lvts_ctrl->base)); ++ * writel(0x0, LVTS_PROTTB(lvts_ctrl->base)); ++ */ ++ writel(lvts_ctrl->hw_tshut_raw_temp, LVTS_PROTTC(lvts_ctrl->base)); ++ ++ /* ++ * LVTS_MONINT : Interrupt configuration register ++ * ++ * The LVTS_MONINT register layout is the same as the LVTS_MONINTSTS ++ * register, except we set the bits to enable the interrupt. ++ */ ++ writel(LVTS_MONINT_CONF, LVTS_MONINT(lvts_ctrl->base)); ++ ++ return 0; ++} ++ ++static int lvts_domain_reset(struct device *dev, struct reset_control *reset) ++{ ++ int ret; ++ ++ ret = reset_control_assert(reset); ++ if (ret) ++ return ret; ++ ++ return reset_control_deassert(reset); ++} ++ ++/* ++ * Enable or disable the clocks of a specified thermal controller ++ */ ++static int lvts_ctrl_set_enable(struct lvts_ctrl *lvts_ctrl, int enable) ++{ ++ /* ++ * LVTS_CLKEN : Internal LVTS clock ++ * ++ * Bits: ++ * ++ * 0 : enable / disable clock ++ */ ++ writel(enable, LVTS_CLKEN(lvts_ctrl->base)); ++ ++ return 0; ++} ++ ++static int lvts_ctrl_connect(struct device *dev, struct lvts_ctrl *lvts_ctrl) ++{ ++ u32 id, cmds[] = { 0xC103FFFF, 0xC502FF55 }; ++ ++ lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds)); ++ ++ /* ++ * LVTS_ID : Get ID and status of the thermal controller ++ * ++ * Bits: ++ * ++ * 0-5 : thermal controller id ++ * 7 : thermal controller connection is valid ++ */ ++ id = readl(LVTS_ID(lvts_ctrl->base)); ++ if (!(id & BIT(7))) ++ return -EIO; ++ ++ return 0; ++} ++ ++static int lvts_ctrl_initialize(struct device *dev, struct lvts_ctrl *lvts_ctrl) ++{ ++ /* ++ * Write device mask: 0xC1030000 ++ */ ++ u32 cmds[] = { ++ 0xC1030E01, 0xC1030CFC, 0xC1030A8C, 0xC103098D, 0xC10308F1, ++ 0xC10307A6, 0xC10306B8, 0xC1030500, 0xC1030420, 0xC1030300, ++ 0xC1030030, 0xC10300F6, 0xC1030050, 0xC1030060, 0xC10300AC, ++ 0xC10300FC, 0xC103009D, 0xC10300F1, 0xC10300E1 ++ }; ++ ++ lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds)); ++ ++ return 0; ++} ++ ++static int lvts_ctrl_calibrate(struct device *dev, struct lvts_ctrl *lvts_ctrl) ++{ ++ int i; ++ void __iomem *lvts_edata[] = { ++ LVTS_EDATA00(lvts_ctrl->base), ++ LVTS_EDATA01(lvts_ctrl->base), ++ LVTS_EDATA02(lvts_ctrl->base), ++ LVTS_EDATA03(lvts_ctrl->base) ++ }; ++ ++ /* ++ * LVTS_EDATA0X : Efuse calibration reference value for sensor X ++ * ++ * Bits: ++ * ++ * 20-0 : Efuse value for normalization data ++ */ ++ for (i = 0; i < LVTS_SENSOR_MAX; i++) ++ writel(lvts_ctrl->calibration[i], lvts_edata[i]); ++ ++ return 0; ++} ++ ++static int lvts_ctrl_configure(struct device *dev, struct lvts_ctrl *lvts_ctrl) ++{ ++ u32 value; ++ ++ /* ++ * LVTS_TSSEL : Sensing point index numbering ++ * ++ * Bits: ++ * ++ * 31-24: ADC Sense 3 ++ * 23-16: ADC Sense 2 ++ * 15-8 : ADC Sense 1 ++ * 7-0 : ADC Sense 0 ++ */ ++ value = LVTS_TSSEL_CONF; ++ writel(value, LVTS_TSSEL(lvts_ctrl->base)); ++ ++ /* ++ * LVTS_CALSCALE : ADC voltage round ++ */ ++ value = 0x300; ++ value = LVTS_CALSCALE_CONF; ++ ++ /* ++ * LVTS_MSRCTL0 : Sensor filtering strategy ++ * ++ * Filters: ++ * ++ * 000 : One sample ++ * 001 : Avg 2 samples ++ * 010 : 4 samples, drop min and max, avg 2 samples ++ * 011 : 6 samples, drop min and max, avg 4 samples ++ * 100 : 10 samples, drop min and max, avg 8 samples ++ * 101 : 18 samples, drop min and max, avg 16 samples ++ * ++ * Bits: ++ * ++ * 0-2 : Sensor0 filter ++ * 3-5 : Sensor1 filter ++ * 6-8 : Sensor2 filter ++ * 9-11 : Sensor3 filter ++ */ ++ value = LVTS_HW_FILTER << 9 | LVTS_HW_FILTER << 6 | ++ LVTS_HW_FILTER << 3 | LVTS_HW_FILTER; ++ writel(value, LVTS_MSRCTL0(lvts_ctrl->base)); ++ ++ /* ++ * LVTS_MSRCTL1 : Measurement control ++ * ++ * Bits: ++ * ++ * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3 ++ * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2 ++ * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1 ++ * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0 ++ * ++ * That configuration will ignore the filtering and the delays ++ * introduced below in MONCTL1 and MONCTL2 ++ */ ++ if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) { ++ value = BIT(9) | BIT(6) | BIT(5) | BIT(4); ++ writel(value, LVTS_MSRCTL1(lvts_ctrl->base)); ++ } ++ ++ /* ++ * LVTS_MONCTL1 : Period unit and group interval configuration ++ * ++ * The clock source of LVTS thermal controller is 26MHz. ++ * ++ * The period unit is a time base for all the interval delays ++ * specified in the registers. By default we use 12. The time ++ * conversion is done by multiplying by 256 and 1/26.10^6 ++ * ++ * An interval delay multiplied by the period unit gives the ++ * duration in seconds. ++ * ++ * - Filter interval delay is a delay between two samples of ++ * the same sensor. ++ * ++ * - Sensor interval delay is a delay between two samples of ++ * different sensors. ++ * ++ * - Group interval delay is a delay between different rounds. ++ * ++ * For example: ++ * If Period unit = C, filter delay = 1, sensor delay = 2, group delay = 1, ++ * and two sensors, TS1 and TS2, are in a LVTS thermal controller ++ * and then ++ * Period unit time = C * 1/26M * 256 = 12 * 38.46ns * 256 = 118.149us ++ * Filter interval delay = 1 * Period unit = 118.149us ++ * Sensor interval delay = 2 * Period unit = 236.298us ++ * Group interval delay = 1 * Period unit = 118.149us ++ * ++ * TS1 TS1 ... TS1 TS2 TS2 ... TS2 TS1... ++ * <--> Filter interval delay ++ * <--> Sensor interval delay ++ * <--> Group interval delay ++ * Bits: ++ * 29 - 20 : Group interval ++ * 16 - 13 : Send a single interrupt when crossing the hot threshold (1) ++ * or an interrupt everytime the hot threshold is crossed (0) ++ * 9 - 0 : Period unit ++ * ++ */ ++ value = LVTS_GROUP_INTERVAL << 20 | LVTS_PERIOD_UNIT; ++ writel(value, LVTS_MONCTL1(lvts_ctrl->base)); ++ ++ /* ++ * LVTS_MONCTL2 : Filtering and sensor interval ++ * ++ * Bits: ++ * ++ * 25-16 : Interval unit in PERIOD_UNIT between sample on ++ * the same sensor, filter interval ++ * 9-0 : Interval unit in PERIOD_UNIT between each sensor ++ * ++ */ ++ value = LVTS_FILTER_INTERVAL << 16 | LVTS_SENSOR_INTERVAL; ++ writel(value, LVTS_MONCTL2(lvts_ctrl->base)); ++ ++ return lvts_irq_init(lvts_ctrl); ++} ++ ++static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl) ++{ ++ struct lvts_sensor *lvts_sensors = lvts_ctrl->sensors; ++ struct thermal_zone_device *tz; ++ u32 sensor_map = 0; ++ int i; ++ ++ for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) { ++ ++ int dt_id = lvts_sensors[i].dt_id; ++ ++ tz = devm_thermal_of_zone_register(dev, dt_id, &lvts_sensors[i], ++ &lvts_ops); ++ if (IS_ERR(tz)) { ++ /* ++ * This thermal zone is not described in the ++ * device tree. It is not an error from the ++ * thermal OF code POV, we just continue. ++ */ ++ if (PTR_ERR(tz) == -ENODEV) ++ continue; ++ ++ return PTR_ERR(tz); ++ } ++ ++ /* ++ * The thermal zone pointer will be needed in the ++ * interrupt handler, we store it in the sensor ++ * structure. The thermal domain structure will be ++ * passed to the interrupt handler private data as the ++ * interrupt is shared for all the controller ++ * belonging to the thermal domain. ++ */ ++ lvts_sensors[i].tz = tz; ++ ++ /* ++ * This sensor was correctly associated with a thermal ++ * zone, let's set the corresponding bit in the sensor ++ * map, so we can enable the temperature monitoring in ++ * the hardware thermal controller. ++ */ ++ sensor_map |= BIT(i); ++ } ++ ++ /* ++ * Bits: ++ * 9: Single point access flow ++ * 0-3: Enable sensing point 0-3 ++ * ++ * The initialization of the thermal zones give us ++ * which sensor point to enable. If any thermal zone ++ * was not described in the device tree, it won't be ++ * enabled here in the sensor map. ++ */ ++ writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); ++ ++ return 0; ++} ++ ++static int lvts_domain_init(struct device *dev, struct lvts_domain *lvts_td, ++ const struct lvts_data *lvts_data) ++{ ++ struct lvts_ctrl *lvts_ctrl; ++ int i, ret; ++ ++ ret = lvts_ctrl_init(dev, lvts_td, lvts_data); ++ if (ret) ++ return ret; ++ ++ ret = lvts_domain_reset(dev, lvts_td->reset); ++ if (ret) { ++ dev_dbg(dev, "Failed to reset domain"); ++ return ret; ++ } ++ ++ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { ++ ++ lvts_ctrl = &lvts_td->lvts_ctrl[i]; ++ ++ /* ++ * Initialization steps: ++ * ++ * - Enable the clock ++ * - Connect to the LVTS ++ * - Initialize the LVTS ++ * - Prepare the calibration data ++ * - Select monitored sensors ++ * [ Configure sampling ] ++ * [ Configure the interrupt ] ++ * - Start measurement ++ */ ++ ret = lvts_ctrl_set_enable(lvts_ctrl, true); ++ if (ret) { ++ dev_dbg(dev, "Failed to enable LVTS clock"); ++ return ret; ++ } ++ ++ ret = lvts_ctrl_connect(dev, lvts_ctrl); ++ if (ret) { ++ dev_dbg(dev, "Failed to connect to LVTS controller"); ++ return ret; ++ } ++ ++ ret = lvts_ctrl_initialize(dev, lvts_ctrl); ++ if (ret) { ++ dev_dbg(dev, "Failed to initialize controller"); ++ return ret; ++ } ++ ++ ret = lvts_ctrl_calibrate(dev, lvts_ctrl); ++ if (ret) { ++ dev_dbg(dev, "Failed to calibrate controller"); ++ return ret; ++ } ++ ++ ret = lvts_ctrl_configure(dev, lvts_ctrl); ++ if (ret) { ++ dev_dbg(dev, "Failed to configure controller"); ++ return ret; ++ } ++ ++ ret = lvts_ctrl_start(dev, lvts_ctrl); ++ if (ret) { ++ dev_dbg(dev, "Failed to start controller"); ++ return ret; ++ } ++ } ++ ++ return lvts_debugfs_init(dev, lvts_td); ++} ++ ++static int lvts_probe(struct platform_device *pdev) ++{ ++ const struct lvts_data *lvts_data; ++ struct lvts_domain *lvts_td; ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ int irq, ret; ++ ++ lvts_td = devm_kzalloc(dev, sizeof(*lvts_td), GFP_KERNEL); ++ if (!lvts_td) ++ return -ENOMEM; ++ ++ lvts_data = of_device_get_match_data(dev); ++ ++ lvts_td->clk = devm_clk_get_enabled(dev, NULL); ++ if (IS_ERR(lvts_td->clk)) ++ return dev_err_probe(dev, PTR_ERR(lvts_td->clk), "Failed to retrieve clock\n"); ++ ++ res = platform_get_mem_or_io(pdev, 0); ++ if (!res) ++ return dev_err_probe(dev, (-ENXIO), "No IO resource\n"); ++ ++ lvts_td->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); ++ if (IS_ERR(lvts_td->base)) ++ return dev_err_probe(dev, PTR_ERR(lvts_td->base), "Failed to map io resource\n"); ++ ++ lvts_td->reset = devm_reset_control_get_by_index(dev, 0); ++ if (IS_ERR(lvts_td->reset)) ++ return dev_err_probe(dev, PTR_ERR(lvts_td->reset), "Failed to get reset control\n"); ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) ++ return dev_err_probe(dev, irq, "No irq resource\n"); ++ ++ ret = lvts_domain_init(dev, lvts_td, lvts_data); ++ if (ret) ++ return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n"); ++ ++ /* ++ * At this point the LVTS is initialized and enabled. We can ++ * safely enable the interrupt. ++ */ ++ ret = devm_request_threaded_irq(dev, irq, NULL, lvts_irq_handler, ++ IRQF_ONESHOT, dev_name(dev), lvts_td); ++ if (ret) ++ return dev_err_probe(dev, ret, "Failed to request interrupt\n"); ++ ++ platform_set_drvdata(pdev, lvts_td); ++ ++ return 0; ++} ++ ++static int lvts_remove(struct platform_device *pdev) ++{ ++ struct lvts_domain *lvts_td; ++ int i; ++ ++ lvts_td = platform_get_drvdata(pdev); ++ ++ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) ++ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false); ++ ++ lvts_debugfs_exit(lvts_td); ++ ++ return 0; ++} ++ ++static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = { ++ { ++ .cal_offset = { 0x04, 0x07 }, ++ .lvts_sensor = { ++ { .dt_id = MT8195_MCU_BIG_CPU0 }, ++ { .dt_id = MT8195_MCU_BIG_CPU1 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x0, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, ++ }, ++ { ++ .cal_offset = { 0x0d, 0x10 }, ++ .lvts_sensor = { ++ { .dt_id = MT8195_MCU_BIG_CPU2 }, ++ { .dt_id = MT8195_MCU_BIG_CPU3 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x100, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, ++ }, ++ { ++ .cal_offset = { 0x16, 0x19, 0x1c, 0x1f }, ++ .lvts_sensor = { ++ { .dt_id = MT8195_MCU_LITTLE_CPU0 }, ++ { .dt_id = MT8195_MCU_LITTLE_CPU1 }, ++ { .dt_id = MT8195_MCU_LITTLE_CPU2 }, ++ { .dt_id = MT8195_MCU_LITTLE_CPU3 } ++ }, ++ .num_lvts_sensor = 4, ++ .offset = 0x200, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, ++ } ++}; ++ ++static const struct lvts_data mt8195_lvts_mcu_data = { ++ .lvts_ctrl = mt8195_lvts_data_ctrl, ++ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_data_ctrl), ++}; ++ ++static const struct of_device_id lvts_of_match[] = { ++ { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, lvts_of_match); ++ ++static struct platform_driver lvts_driver = { ++ .probe = lvts_probe, ++ .remove = lvts_remove, ++ .driver = { ++ .name = "mtk-lvts-thermal", ++ .of_match_table = lvts_of_match, ++ }, ++}; ++module_platform_driver(lvts_driver); ++ ++MODULE_AUTHOR("Balsam CHIHI "); ++MODULE_DESCRIPTION("MediaTek LVTS Thermal Driver"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch b/target/linux/mediatek/patches-6.1/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch new file mode 100644 index 0000000000..b6a5f64090 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch @@ -0,0 +1,186 @@ +From 498e2f7a6e69dcbca24715de2b4b97569fdfeff4 Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Thu, 9 Feb 2023 11:56:24 +0100 +Subject: [PATCH] dt-bindings: thermal: mediatek: Add LVTS thermal controllers + +Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195. + +Signed-off-by: Balsam CHIHI +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com +Signed-off-by: Daniel Lezcano +Signed-off-by: Rafael J. Wysocki +--- + .../thermal/mediatek,lvts-thermal.yaml | 142 ++++++++++++++++++ + .../thermal/mediatek,lvts-thermal.h | 19 +++ + 2 files changed, 161 insertions(+) + create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml + create mode 100644 include/dt-bindings/thermal/mediatek,lvts-thermal.h + +--- /dev/null ++++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml +@@ -0,0 +1,142 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: MediaTek SoC Low Voltage Thermal Sensor (LVTS) ++ ++maintainers: ++ - Balsam CHIHI ++ ++description: | ++ LVTS is a thermal management architecture composed of three subsystems, ++ a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU), ++ a Converter - Low Voltage Thermal Sensor converter (LVTS), and ++ a Digital controller (LVTS_CTRL). ++ ++properties: ++ compatible: ++ enum: ++ - mediatek,mt8192-lvts-ap ++ - mediatek,mt8192-lvts-mcu ++ - mediatek,mt8195-lvts-ap ++ - mediatek,mt8195-lvts-mcu ++ ++ reg: ++ maxItems: 1 ++ ++ interrupts: ++ maxItems: 1 ++ ++ clocks: ++ maxItems: 1 ++ ++ resets: ++ maxItems: 1 ++ description: LVTS reset for clearing temporary data on AP/MCU. ++ ++ nvmem-cells: ++ minItems: 1 ++ items: ++ - description: Calibration eFuse data 1 for LVTS ++ - description: Calibration eFuse data 2 for LVTS ++ ++ nvmem-cell-names: ++ minItems: 1 ++ items: ++ - const: lvts-calib-data-1 ++ - const: lvts-calib-data-2 ++ ++ "#thermal-sensor-cells": ++ const: 1 ++ ++allOf: ++ - $ref: thermal-sensor.yaml# ++ ++ - if: ++ properties: ++ compatible: ++ contains: ++ enum: ++ - mediatek,mt8192-lvts-ap ++ - mediatek,mt8192-lvts-mcu ++ then: ++ properties: ++ nvmem-cells: ++ maxItems: 1 ++ ++ nvmem-cell-names: ++ maxItems: 1 ++ ++ - if: ++ properties: ++ compatible: ++ contains: ++ enum: ++ - mediatek,mt8195-lvts-ap ++ - mediatek,mt8195-lvts-mcu ++ then: ++ properties: ++ nvmem-cells: ++ minItems: 2 ++ ++ nvmem-cell-names: ++ minItems: 2 ++ ++required: ++ - compatible ++ - reg ++ - interrupts ++ - clocks ++ - resets ++ - nvmem-cells ++ - nvmem-cell-names ++ - "#thermal-sensor-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ #include ++ #include ++ #include ++ #include ++ ++ soc { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ lvts_mcu: thermal-sensor@11278000 { ++ compatible = "mediatek,mt8195-lvts-mcu"; ++ reg = <0 0x11278000 0 0x1000>; ++ interrupts = ; ++ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; ++ resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>; ++ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; ++ nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2"; ++ #thermal-sensor-cells = <1>; ++ }; ++ }; ++ ++ thermal_zones: thermal-zones { ++ cpu0-thermal { ++ polling-delay = <1000>; ++ polling-delay-passive = <250>; ++ thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>; ++ ++ trips { ++ cpu0_alert: trip-alert { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ cpu0_crit: trip-crit { ++ temperature = <100000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ }; ++ }; +--- /dev/null ++++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h +@@ -0,0 +1,19 @@ ++/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ ++/* ++ * Copyright (c) 2023 MediaTek Inc. ++ * Author: Balsam CHIHI ++ */ ++ ++#ifndef __MEDIATEK_LVTS_DT_H ++#define __MEDIATEK_LVTS_DT_H ++ ++#define MT8195_MCU_BIG_CPU0 0 ++#define MT8195_MCU_BIG_CPU1 1 ++#define MT8195_MCU_BIG_CPU2 2 ++#define MT8195_MCU_BIG_CPU3 3 ++#define MT8195_MCU_LITTLE_CPU0 4 ++#define MT8195_MCU_LITTLE_CPU1 5 ++#define MT8195_MCU_LITTLE_CPU2 6 ++#define MT8195_MCU_LITTLE_CPU3 7 ++ ++#endif /* __MEDIATEK_LVTS_DT_H */ diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch b/target/linux/mediatek/patches-6.1/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch new file mode 100644 index 0000000000..efb0d8b64f --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch @@ -0,0 +1,35 @@ +From 05aaa7fdb0736262e224369b9b9f1410320fc71b Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Tue, 7 Mar 2023 16:45:21 +0100 +Subject: [PATCH] dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal + controllers for mt8195 + +Add AP Domain to LVTS thermal controllers dt-binding definition for mt8195. + +Signed-off-by: Balsam CHIHI +Acked-by: Rob Herring +Reviewed-by: AngeloGioacchino Del Regno +Tested-by: Chen-Yu Tsai +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230307154524.118541-2-bchihi@baylibre.com +--- + include/dt-bindings/thermal/mediatek,lvts-thermal.h | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h ++++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h +@@ -16,4 +16,14 @@ + #define MT8195_MCU_LITTLE_CPU2 6 + #define MT8195_MCU_LITTLE_CPU3 7 + ++#define MT8195_AP_VPU0 8 ++#define MT8195_AP_VPU1 9 ++#define MT8195_AP_GPU0 10 ++#define MT8195_AP_GPU1 11 ++#define MT8195_AP_VDEC 12 ++#define MT8195_AP_IMG 13 ++#define MT8195_AP_INFRA 14 ++#define MT8195_AP_CAM0 15 ++#define MT8195_AP_CAM1 16 ++ + #endif /* __MEDIATEK_LVTS_DT_H */ diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch b/target/linux/mediatek/patches-6.1/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch new file mode 100644 index 0000000000..c68969321e --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch @@ -0,0 +1,65 @@ +From a6ff3c0021468721b96e84892a8cae24bde8d65f Mon Sep 17 00:00:00 2001 +From: Daniel Lezcano +Date: Wed, 1 Mar 2023 21:14:29 +0100 +Subject: [PATCH] thermal/core: Add a thermal zone 'devdata' accessor + +The thermal zone device structure is exposed to the different drivers +and obviously they access the internals while that should be +restricted to the core thermal code. + +In order to self-encapsulate the thermal core code, we need to prevent +the drivers accessing directly the thermal zone structure and provide +accessor functions to deal with. + +Provide an accessor to the 'devdata' structure and make use of it in +the different drivers. + +No functional changes intended. + +Signed-off-by: Daniel Lezcano +Acked-by: Rafael J. Wysocki +Acked-by: Mark Brown +Signed-off-by: Rafael J. Wysocki +--- + drivers/thermal/thermal_core.c | 6 ++++++ + include/linux/thermal.h | 7 +++++++ + 2 files changed, 13 insertions(+) + +--- a/drivers/thermal/thermal_core.c ++++ b/drivers/thermal/thermal_core.c +@@ -1346,6 +1346,12 @@ struct thermal_zone_device *thermal_zone + } + EXPORT_SYMBOL_GPL(thermal_zone_device_register); + ++void *thermal_zone_device_priv(struct thermal_zone_device *tzd) ++{ ++ return tzd->devdata; ++} ++EXPORT_SYMBOL_GPL(thermal_zone_device_priv); ++ + /** + * thermal_zone_device_unregister - removes the registered thermal zone device + * @tz: the thermal zone device to remove +--- a/include/linux/thermal.h ++++ b/include/linux/thermal.h +@@ -346,6 +346,8 @@ thermal_zone_device_register_with_trips( + void *, struct thermal_zone_device_ops *, + struct thermal_zone_params *, int, int); + ++void *thermal_zone_device_priv(struct thermal_zone_device *tzd); ++ + int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, + struct thermal_cooling_device *, + unsigned long, unsigned long, +@@ -417,6 +419,11 @@ static inline int thermal_zone_get_offse + struct thermal_zone_device *tz) + { return -ENODEV; } + ++static inline void *thermal_zone_device_priv(struct thermal_zone_device *tz) ++{ ++ return NULL; ++} ++ + static inline int thermal_zone_device_enable(struct thermal_zone_device *tz) + { return -ENODEV; } + diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch new file mode 100644 index 0000000000..66d3c9e302 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch @@ -0,0 +1,55 @@ +From 072e35c98806100182c0a7263cf4cba09ce43463 Mon Sep 17 00:00:00 2001 +From: Daniel Lezcano +Date: Wed, 1 Mar 2023 21:14:38 +0100 +Subject: [PATCH] thermal/core: Add thermal_zone_device structure 'type' + accessor + +The thermal zone device structure is exposed via the exported +thermal.h header. This structure should stay private the thermal core +code. In order to encapsulate the structure, let's add an accessor to +get the 'type' of the thermal zone. + +Signed-off-by: Daniel Lezcano +Signed-off-by: Rafael J. Wysocki +--- + drivers/thermal/thermal_core.c | 6 ++++++ + include/linux/thermal.h | 6 ++++++ + 2 files changed, 12 insertions(+) + +--- a/drivers/thermal/thermal_core.c ++++ b/drivers/thermal/thermal_core.c +@@ -1352,6 +1352,12 @@ void *thermal_zone_device_priv(struct th + } + EXPORT_SYMBOL_GPL(thermal_zone_device_priv); + ++const char *thermal_zone_device_type(struct thermal_zone_device *tzd) ++{ ++ return tzd->type; ++} ++EXPORT_SYMBOL_GPL(thermal_zone_device_type); ++ + /** + * thermal_zone_device_unregister - removes the registered thermal zone device + * @tz: the thermal zone device to remove +--- a/include/linux/thermal.h ++++ b/include/linux/thermal.h +@@ -347,6 +347,7 @@ thermal_zone_device_register_with_trips( + struct thermal_zone_params *, int, int); + + void *thermal_zone_device_priv(struct thermal_zone_device *tzd); ++const char *thermal_zone_device_type(struct thermal_zone_device *tzd); + + int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, + struct thermal_cooling_device *, +@@ -423,6 +424,11 @@ static inline void *thermal_zone_device_ + { + return NULL; + } ++ ++static inline const char *thermal_zone_device_type(struct thermal_zone_device *tzd) ++{ ++ return NULL; ++} + + static inline int thermal_zone_device_enable(struct thermal_zone_device *tz) + { return -ENODEV; } diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch b/target/linux/mediatek/patches-6.1/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch new file mode 100644 index 0000000000..57bc910d3e --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch @@ -0,0 +1,74 @@ +From 7d78bab533eb9aa0e5240e25a204e8f416723ed6 Mon Sep 17 00:00:00 2001 +From: Daniel Lezcano +Date: Wed, 1 Mar 2023 21:14:30 +0100 +Subject: [PATCH 07/42] thermal/core: Use the thermal zone 'devdata' accessor + in thermal located drivers +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The thermal zone device structure is exposed to the different drivers +and obviously they access the internals while that should be +restricted to the core thermal code. + +In order to self-encapsulate the thermal core code, we need to prevent +the drivers accessing directly the thermal zone structure and provide +accessor functions to deal with. + +Use the devdata accessor introduced in the previous patch. + +No functional changes intended. + +[skipped drivers not relevant for mediatek target] + +Signed-off-by: Daniel Lezcano +Reviewed-by: Niklas Söderlund #R-Car +Acked-by: Mark Brown +Reviewed-by: AngeloGioacchino Del Regno #MediaTek auxadc and lvts +Reviewed-by: Balsam CHIHI #Mediatek lvts +Reviewed-by: Adam Ward #da9062 +Reviewed-by: Baolin Wang #spread +Acked-by: Jernej Skrabec #sun8i_thermal +Acked-by: Rafael J. Wysocki +Acked-by: Florian Fainelli #Broadcom +Reviewed-by: Dhruva Gole # K3 bandgap +Acked-by: Linus Walleij +Acked-by: Heiko Stuebner #rockchip +Reviewed-by: Kunihiko Hayashi #uniphier +Signed-off-by: Rafael J. Wysocki +--- + drivers/thermal/mediatek/auxadc_thermal.c | 2 +- + drivers/thermal/mediatek/lvts_thermal.c | 4 ++-- + 43 files changed, 71 insertions(+), 73 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -763,7 +763,7 @@ static int mtk_thermal_bank_temperature( + + static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature) + { +- struct mtk_thermal *mt = tz->devdata; ++ struct mtk_thermal *mt = thermal_zone_device_priv(tz); + int i; + int tempmax = INT_MIN; + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -252,7 +252,7 @@ static u32 lvts_temp_to_raw(int temperat + + static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) + { +- struct lvts_sensor *lvts_sensor = tz->devdata; ++ struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); + void __iomem *msr = lvts_sensor->msr; + u32 value; + +@@ -290,7 +290,7 @@ static int lvts_get_temp(struct thermal_ + + static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) + { +- struct lvts_sensor *lvts_sensor = tz->devdata; ++ struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); + void __iomem *base = lvts_sensor->base; + u32 raw_low = lvts_temp_to_raw(low); + u32 raw_high = lvts_temp_to_raw(high); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch b/target/linux/mediatek/patches-6.1/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch new file mode 100644 index 0000000000..647b3b0eca --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch @@ -0,0 +1,201 @@ +From cc9c60e9cfeeac45d63361fa8c085c43c4bdfe3a Mon Sep 17 00:00:00 2001 +From: Daniel Lezcano +Date: Wed, 1 Mar 2023 21:14:36 +0100 +Subject: [PATCH 08/42] thermal/hwmon: Use the right device for + devm_thermal_add_hwmon_sysfs() + +The devres variant of thermal_add_hwmon_sysfs() only takes the thermal +zone structure pointer as parameter. + +Actually, it uses the tz->device to add it in the devres list. + +It is preferable to use the device registering the thermal zone +instead of the thermal zone device itself. That prevents the driver +accessing the thermal zone structure internals and it is from my POV +more correct regarding how devm_ is used. + +[skipped imx thermal which did not apply cleanly and irrelevant on +mediatek target] + +Signed-off-by: Daniel Lezcano +Acked-by: Martin Blumenstingl #amlogic_thermal +Acked-by: Jernej Skrabec #sun8i_thermal +Reviewed-by: AngeloGioacchino Del Regno #MediaTek auxadc +Signed-off-by: Rafael J. Wysocki +--- + drivers/thermal/amlogic_thermal.c | 2 +- + drivers/thermal/imx_sc_thermal.c | 2 +- + drivers/thermal/k3_bandgap.c | 2 +- + drivers/thermal/mediatek/auxadc_thermal.c | 2 +- + drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 2 +- + drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 2 +- + drivers/thermal/qcom/tsens.c | 2 +- + drivers/thermal/qoriq_thermal.c | 2 +- + drivers/thermal/sun8i_thermal.c | 2 +- + drivers/thermal/tegra/tegra30-tsensor.c | 2 +- + drivers/thermal/thermal_hwmon.c | 4 ++-- + drivers/thermal/thermal_hwmon.h | 4 ++-- + drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +- + 13 files changed, 15 insertions(+), 15 deletions(-) + +--- a/drivers/thermal/amlogic_thermal.c ++++ b/drivers/thermal/amlogic_thermal.c +@@ -286,7 +286,7 @@ static int amlogic_thermal_probe(struct + return ret; + } + +- if (devm_thermal_add_hwmon_sysfs(pdata->tzd)) ++ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, pdata->tzd)) + dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n"); + + ret = amlogic_thermal_initialize(pdata); +--- a/drivers/thermal/imx_sc_thermal.c ++++ b/drivers/thermal/imx_sc_thermal.c +@@ -120,7 +120,7 @@ static int imx_sc_thermal_probe(struct p + return ret; + } + +- if (devm_thermal_add_hwmon_sysfs(sensor->tzd)) ++ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, sensor->tzd)) + dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n"); + } + +--- a/drivers/thermal/k3_bandgap.c ++++ b/drivers/thermal/k3_bandgap.c +@@ -222,7 +222,7 @@ static int k3_bandgap_probe(struct platf + goto err_alloc; + } + +- if (devm_thermal_add_hwmon_sysfs(data[id].tzd)) ++ if (devm_thermal_add_hwmon_sysfs(dev, data[id].tzd)) + dev_warn(dev, "Failed to add hwmon sysfs attributes\n"); + } + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -1210,7 +1210,7 @@ static int mtk_thermal_probe(struct plat + goto err_disable_clk_peri_therm; + } + +- ret = devm_thermal_add_hwmon_sysfs(tzdev); ++ ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev); + if (ret) + dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs"); + +--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c ++++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c +@@ -688,7 +688,7 @@ static int adc_tm5_register_tzd(struct a + return PTR_ERR(tzd); + } + adc_tm->channels[i].tzd = tzd; +- if (devm_thermal_add_hwmon_sysfs(tzd)) ++ if (devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd)) + dev_warn(adc_tm->dev, + "Failed to add hwmon sysfs attributes\n"); + } +--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c ++++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c +@@ -460,7 +460,7 @@ static int qpnp_tm_probe(struct platform + return ret; + } + +- if (devm_thermal_add_hwmon_sysfs(chip->tz_dev)) ++ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev)) + dev_warn(&pdev->dev, + "Failed to add hwmon sysfs attributes\n"); + +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -1056,7 +1056,7 @@ static int tsens_register(struct tsens_p + if (priv->ops->enable) + priv->ops->enable(priv, i); + +- if (devm_thermal_add_hwmon_sysfs(tzd)) ++ if (devm_thermal_add_hwmon_sysfs(priv->dev, tzd)) + dev_warn(priv->dev, + "Failed to add hwmon sysfs attributes\n"); + } +--- a/drivers/thermal/qoriq_thermal.c ++++ b/drivers/thermal/qoriq_thermal.c +@@ -158,7 +158,7 @@ static int qoriq_tmu_register_tmu_zone(s + return ret; + } + +- if (devm_thermal_add_hwmon_sysfs(tzd)) ++ if (devm_thermal_add_hwmon_sysfs(dev, tzd)) + dev_warn(dev, + "Failed to add hwmon sysfs attributes\n"); + +--- a/drivers/thermal/sun8i_thermal.c ++++ b/drivers/thermal/sun8i_thermal.c +@@ -468,7 +468,7 @@ static int sun8i_ths_register(struct ths + if (IS_ERR(tmdev->sensor[i].tzd)) + return PTR_ERR(tmdev->sensor[i].tzd); + +- if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd)) ++ if (devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd)) + dev_warn(tmdev->dev, + "Failed to add hwmon sysfs attributes\n"); + } +--- a/drivers/thermal/tegra/tegra30-tsensor.c ++++ b/drivers/thermal/tegra/tegra30-tsensor.c +@@ -530,7 +530,7 @@ static int tegra_tsensor_register_channe + return 0; + } + +- if (devm_thermal_add_hwmon_sysfs(tsc->tzd)) ++ if (devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd)) + dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n"); + + return 0; +--- a/drivers/thermal/thermal_hwmon.c ++++ b/drivers/thermal/thermal_hwmon.c +@@ -255,7 +255,7 @@ static void devm_thermal_hwmon_release(s + thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res); + } + +-int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) ++int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz) + { + struct thermal_zone_device **ptr; + int ret; +@@ -272,7 +272,7 @@ int devm_thermal_add_hwmon_sysfs(struct + } + + *ptr = tz; +- devres_add(&tz->device, ptr); ++ devres_add(dev, ptr); + + return ret; + } +--- a/drivers/thermal/thermal_hwmon.h ++++ b/drivers/thermal/thermal_hwmon.h +@@ -17,7 +17,7 @@ + + #ifdef CONFIG_THERMAL_HWMON + int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz); +-int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz); ++int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz); + void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz); + #else + static inline int +@@ -27,7 +27,7 @@ thermal_add_hwmon_sysfs(struct thermal_z + } + + static inline int +-devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) ++devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz) + { + return 0; + } +--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c ++++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +@@ -182,7 +182,7 @@ int ti_thermal_expose_sensor(struct ti_b + ti_bandgap_set_sensor_data(bgp, id, data); + ti_bandgap_write_update_interval(bgp, data->sensor_id, interval); + +- if (devm_thermal_add_hwmon_sysfs(data->ti_thermal)) ++ if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal)) + dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n"); + + return 0; diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch b/target/linux/mediatek/patches-6.1/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch new file mode 100644 index 0000000000..9dedc2cb68 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch @@ -0,0 +1,79 @@ +From 5a72b8e4bac753e4dc74dc0a1335d120f63df97a Mon Sep 17 00:00:00 2001 +From: Daniel Lezcano +Date: Wed, 1 Mar 2023 21:14:37 +0100 +Subject: [PATCH 09/42] thermal: Don't use 'device' internal thermal zone + structure field + +Some drivers are directly using the thermal zone's 'device' structure +field. + +Use the driver device pointer instead of the thermal zone device when +it is available. + +Remove the traces when they are duplicate with the traces in the core +code. + +[again skipped imx_thermal.c] + +Cc: Jean Delvare +Cc: Guenter Roeck +Signed-off-by: Daniel Lezcano +Reviewed-by: Balsam CHIHI #Mediatek LVTS +Reviewed-by: AngeloGioacchino Del Regno #MediaTek LVTS +Signed-off-by: Rafael J. Wysocki +--- + drivers/thermal/mediatek/lvts_thermal.c | 4 ++-- + drivers/thermal/thermal_hwmon.c | 4 ++-- + drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +- + 3 files changed, 5 insertions(+), 5 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -305,7 +305,7 @@ static int lvts_set_trips(struct thermal + * 14-0 : Raw temperature for threshold + */ + if (low != -INT_MAX) { +- dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low); ++ pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low); + writel(raw_low, LVTS_H2NTHRE(base)); + } + +@@ -318,7 +318,7 @@ static int lvts_set_trips(struct thermal + * + * 14-0 : Raw temperature for threshold + */ +- dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high); ++ pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high); + writel(raw_high, LVTS_HTHRE(base)); + + return 0; +--- a/drivers/thermal/thermal_hwmon.c ++++ b/drivers/thermal/thermal_hwmon.c +@@ -220,14 +220,14 @@ void thermal_remove_hwmon_sysfs(struct t + hwmon = thermal_hwmon_lookup_by_type(tz); + if (unlikely(!hwmon)) { + /* Should never happen... */ +- dev_dbg(&tz->device, "hwmon device lookup failed!\n"); ++ dev_dbg(hwmon->device, "hwmon device lookup failed!\n"); + return; + } + + temp = thermal_hwmon_lookup_temp(hwmon, tz); + if (unlikely(!temp)) { + /* Should never happen... */ +- dev_dbg(&tz->device, "temperature input lookup failed!\n"); ++ dev_dbg(hwmon->device, "temperature input lookup failed!\n"); + return; + } + +--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c ++++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +@@ -43,7 +43,7 @@ static void ti_thermal_work(struct work_ + + thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); + +- dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n", ++ dev_dbg(data->bgp->dev, "updated thermal zone %s\n", + data->ti_thermal->type); + } + diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch b/target/linux/mediatek/patches-6.1/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch new file mode 100644 index 0000000000..8cec9aba97 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch @@ -0,0 +1,62 @@ +From 66b3a292d3fc749e8ec7ac5278a17e8a5757ecbc Mon Sep 17 00:00:00 2001 +From: Daniel Lezcano +Date: Wed, 1 Mar 2023 21:14:41 +0100 +Subject: [PATCH 10/42] thermal: Use thermal_zone_device_type() accessor + +Replace the accesses to 'tz->type' by its accessor version in order to +self-encapsulate the thermal_zone_device structure. + +Signed-off-by: Daniel Lezcano +Reviewed-by: Ido Schimmel #mlxsw +Reviewed-by: AngeloGioacchino Del Regno #MediaTek LVTS +Signed-off-by: Rafael J. Wysocki +--- + drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 2 +- + drivers/thermal/mediatek/lvts_thermal.c | 6 ++++-- + drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +- + 3 files changed, 6 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c ++++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +@@ -168,7 +168,7 @@ mlxsw_thermal_module_trips_update(struct + + if (crit_temp > emerg_temp) { + dev_warn(dev, "%s : Critical threshold %d is above emergency threshold %d\n", +- tz->tzdev->type, crit_temp, emerg_temp); ++ thermal_zone_device_type(tz->tzdev), crit_temp, emerg_temp); + return 0; + } + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -305,7 +305,8 @@ static int lvts_set_trips(struct thermal + * 14-0 : Raw temperature for threshold + */ + if (low != -INT_MAX) { +- pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low); ++ pr_debug("%s: Setting low limit temperature interrupt: %d\n", ++ thermal_zone_device_type(tz), low); + writel(raw_low, LVTS_H2NTHRE(base)); + } + +@@ -318,7 +319,8 @@ static int lvts_set_trips(struct thermal + * + * 14-0 : Raw temperature for threshold + */ +- pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high); ++ pr_debug("%s: Setting high limit temperature interrupt: %d\n", ++ thermal_zone_device_type(tz), high); + writel(raw_high, LVTS_HTHRE(base)); + + return 0; +--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c ++++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +@@ -44,7 +44,7 @@ static void ti_thermal_work(struct work_ + thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); + + dev_dbg(data->bgp->dev, "updated thermal zone %s\n", +- data->ti_thermal->type); ++ thermal_zone_device_type(data->ti_thermal)); + } + + /** diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch b/target/linux/mediatek/patches-6.1/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch new file mode 100644 index 0000000000..68f41fdd16 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch @@ -0,0 +1,81 @@ +From f6658c1c4ae98477d6be00495226c0617354fe76 Mon Sep 17 00:00:00 2001 +From: Markus Schneider-Pargmann +Date: Fri, 27 Jan 2023 16:44:43 +0100 +Subject: [PATCH 11/42] thermal/drivers/mediatek: Control buffer enablement + tweaks + +Add logic in order to be able to turn on the control buffer on MT8365. +This change now allows to have control buffer support for MTK_THERMAL_V1, +and it allows to define the register offset, and mask used to enable it. + +Signed-off-by: Markus Schneider-Pargmann +Signed-off-by: Fabien Parent +Signed-off-by: Amjad Ouled-Ameur +Reviewed-by: AngeloGioacchino Del Regno +Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-2-55a1ae14af74@baylibre.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/mediatek/auxadc_thermal.c | 28 +++++++++++++++-------- + 1 file changed, 19 insertions(+), 9 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -307,6 +307,9 @@ struct mtk_thermal_data { + bool need_switch_bank; + struct thermal_bank_cfg bank_data[MAX_NUM_ZONES]; + enum mtk_thermal_version version; ++ u32 apmixed_buffer_ctl_reg; ++ u32 apmixed_buffer_ctl_mask; ++ u32 apmixed_buffer_ctl_set; + }; + + struct mtk_thermal { +@@ -560,6 +563,9 @@ static const struct mtk_thermal_data mt7 + .adcpnp = mt7622_adcpnp, + .sensor_mux_values = mt7622_mux_values, + .version = MTK_THERMAL_V2, ++ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1, ++ .apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3), ++ .apmixed_buffer_ctl_set = BIT(0), + }; + + /* +@@ -1079,14 +1085,18 @@ static const struct of_device_id mtk_the + }; + MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); + +-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base) ++static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt, ++ void __iomem *apmixed_base) + { +- int tmp; ++ u32 tmp; ++ ++ if (!mt->conf->apmixed_buffer_ctl_reg) ++ return; + +- tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1); +- tmp &= ~(0x37); +- tmp |= 0x1; +- writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1); ++ tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg); ++ tmp &= mt->conf->apmixed_buffer_ctl_mask; ++ tmp |= mt->conf->apmixed_buffer_ctl_set; ++ writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg); + udelay(200); + } + +@@ -1184,10 +1194,10 @@ static int mtk_thermal_probe(struct plat + goto err_disable_clk_auxadc; + } + +- if (mt->conf->version != MTK_THERMAL_V1) { +- mtk_thermal_turn_on_buffer(apmixed_base); ++ mtk_thermal_turn_on_buffer(mt, apmixed_base); ++ ++ if (mt->conf->version != MTK_THERMAL_V2) + mtk_thermal_release_periodic_ts(mt, auxadc_base); +- } + + if (mt->conf->version == MTK_THERMAL_V1) + mt->raw_to_mcelsius = raw_to_mcelsius_v1; diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch b/target/linux/mediatek/patches-6.1/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch new file mode 100644 index 0000000000..285c6f6a7b --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch @@ -0,0 +1,123 @@ +From c4eff784465f88218dc5eb51320320464db83d3f Mon Sep 17 00:00:00 2001 +From: Fabien Parent +Date: Fri, 27 Jan 2023 16:44:44 +0100 +Subject: [PATCH 12/42] thermal/drivers/mediatek: Add support for MT8365 SoC + +MT8365 is similar to the other SoCs supported by the driver. It has only +one bank and 3 actual sensors that can be multiplexed. There is another +one sensor that does not have usable data. + +Signed-off-by: Fabien Parent +Signed-off-by: Amjad Ouled-Ameur +Reviewed-by: AngeloGioacchino Del Regno +Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-3-55a1ae14af74@baylibre.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/mediatek/auxadc_thermal.c | 68 +++++++++++++++++++++++ + 1 file changed, 68 insertions(+) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -31,6 +31,7 @@ + #define AUXADC_CON2_V 0x010 + #define AUXADC_DATA(channel) (0x14 + (channel) * 4) + ++#define APMIXED_SYS_TS_CON0 0x600 + #define APMIXED_SYS_TS_CON1 0x604 + + /* Thermal Controller Registers */ +@@ -281,6 +282,17 @@ enum mtk_thermal_version { + /* The calibration coefficient of sensor */ + #define MT7986_CALIBRATION 165 + ++/* MT8365 */ ++#define MT8365_TEMP_AUXADC_CHANNEL 11 ++#define MT8365_CALIBRATION 164 ++#define MT8365_NUM_CONTROLLER 1 ++#define MT8365_NUM_BANKS 1 ++#define MT8365_NUM_SENSORS 3 ++#define MT8365_NUM_SENSORS_PER_ZONE 3 ++#define MT8365_TS1 0 ++#define MT8365_TS2 1 ++#define MT8365_TS3 2 ++ + struct mtk_thermal; + + struct thermal_bank_cfg { +@@ -435,6 +447,24 @@ static const int mt7986_mux_values[MT798 + static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; + static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; + ++/* MT8365 thermal sensor data */ ++static const int mt8365_bank_data[MT8365_NUM_SENSORS] = { ++ MT8365_TS1, MT8365_TS2, MT8365_TS3 ++}; ++ ++static const int mt8365_msr[MT8365_NUM_SENSORS_PER_ZONE] = { ++ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 ++}; ++ ++static const int mt8365_adcpnp[MT8365_NUM_SENSORS_PER_ZONE] = { ++ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 ++}; ++ ++static const int mt8365_mux_values[MT8365_NUM_SENSORS] = { 0, 1, 2 }; ++static const int mt8365_tc_offset[MT8365_NUM_CONTROLLER] = { 0 }; ++ ++static const int mt8365_vts_index[MT8365_NUM_SENSORS] = { VTS1, VTS2, VTS3 }; ++ + /* + * The MT8173 thermal controller has four banks. Each bank can read up to + * four temperature sensors simultaneously. The MT8173 has a total of 5 +@@ -510,6 +540,40 @@ static const struct mtk_thermal_data mt2 + }; + + /* ++ * The MT8365 thermal controller has one bank, which can read up to ++ * four temperature sensors simultaneously. The MT8365 has a total of 3 ++ * temperature sensors. ++ * ++ * The thermal core only gets the maximum temperature of this one bank, ++ * so the bank concept wouldn't be necessary here. However, the SVS (Smart ++ * Voltage Scaling) unit makes its decisions based on the same bank ++ * data. ++ */ ++static const struct mtk_thermal_data mt8365_thermal_data = { ++ .auxadc_channel = MT8365_TEMP_AUXADC_CHANNEL, ++ .num_banks = MT8365_NUM_BANKS, ++ .num_sensors = MT8365_NUM_SENSORS, ++ .vts_index = mt8365_vts_index, ++ .cali_val = MT8365_CALIBRATION, ++ .num_controller = MT8365_NUM_CONTROLLER, ++ .controller_offset = mt8365_tc_offset, ++ .need_switch_bank = false, ++ .bank_data = { ++ { ++ .num_sensors = MT8365_NUM_SENSORS, ++ .sensors = mt8365_bank_data ++ }, ++ }, ++ .msr = mt8365_msr, ++ .adcpnp = mt8365_adcpnp, ++ .sensor_mux_values = mt8365_mux_values, ++ .version = MTK_THERMAL_V1, ++ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON0, ++ .apmixed_buffer_ctl_mask = (u32) ~GENMASK(29, 28), ++ .apmixed_buffer_ctl_set = 0, ++}; ++ ++/* + * The MT2712 thermal controller has one bank, which can read up to + * four temperature sensors simultaneously. The MT2712 has a total of 4 + * temperature sensors. +@@ -1080,6 +1144,10 @@ static const struct of_device_id mtk_the + { + .compatible = "mediatek,mt8183-thermal", + .data = (void *)&mt8183_thermal_data, ++ }, ++ { ++ .compatible = "mediatek,mt8365-thermal", ++ .data = (void *)&mt8365_thermal_data, + }, { + }, + }; diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch b/target/linux/mediatek/patches-6.1/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch new file mode 100644 index 0000000000..5c99aa80c1 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch @@ -0,0 +1,50 @@ +From 4eead70db74922bc61e9d0b4591524369a335751 Mon Sep 17 00:00:00 2001 +From: Amjad Ouled-Ameur +Date: Fri, 27 Jan 2023 16:44:46 +0100 +Subject: [PATCH 13/42] thermal/drivers/mediatek: Add delay after thermal banks + initialization + +Thermal sensor reads performed immediately after thermal bank +initialization returns bogus values. This is currently tackled by returning +0 if the temperature is bogus (exceeding 200000). + +Instead, add a delay between the bank init and the thermal zone device +register to properly fix this. + +Signed-off-by: Michael Kao +Signed-off-by: Hsin-Yi Wang +Signed-off-by: Amjad Ouled-Ameur +Reviewed-by: AngeloGioacchino Del Regno +Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-5-55a1ae14af74@baylibre.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/mediatek/auxadc_thermal.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -816,14 +816,6 @@ static int mtk_thermal_bank_temperature( + mt, conf->bank_data[bank->id].sensors[i], raw); + + +- /* +- * The first read of a sensor often contains very high bogus +- * temperature value. Filter these out so that the system does +- * not immediately shut down. +- */ +- if (temp > 200000) +- temp = 0; +- + if (temp > max) + max = temp; + } +@@ -1281,6 +1273,9 @@ static int mtk_thermal_probe(struct plat + + platform_set_drvdata(pdev, mt); + ++ /* Delay for thermal banks to be ready */ ++ msleep(30); ++ + tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, + &mtk_thermal_ops); + if (IS_ERR(tzdev)) { diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch b/target/linux/mediatek/patches-6.1/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch new file mode 100644 index 0000000000..734f5c1e77 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch @@ -0,0 +1,46 @@ +From ad9dc9e92367803a4f9576aea0dab110d03fc510 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Tue, 28 Mar 2023 11:10:17 +0800 +Subject: [PATCH 14/42] thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 + interrupt status bitmask + +The binary representation for sensor 1 interrupt status was incorrectly +assembled, when compared to the full table given in the same comment +section. The conversion into hex was also incorrect, leading to +incorrect interrupt status bitmask for sensor 1. This would cause the +driver to incorrectly identify changes for sensor 1, when in fact it +was sensor 0, or a sensor access time out. + +Fix the binary and hex representations in the comments, and the actual +bitmask macro. + +Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") +Signed-off-by: Chen-Yu Tsai +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230328031017.1360976-1-wenst@chromium.org +--- + drivers/thermal/mediatek/lvts_thermal.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -66,7 +66,7 @@ + #define LVTS_MONINT_CONF 0x9FBF7BDE + + #define LVTS_INT_SENSOR0 0x0009001F +-#define LVTS_INT_SENSOR1 0X000881F0 ++#define LVTS_INT_SENSOR1 0x001203E0 + #define LVTS_INT_SENSOR2 0x00247C00 + #define LVTS_INT_SENSOR3 0x1FC00000 + +@@ -395,8 +395,8 @@ static irqreturn_t lvts_ctrl_irq_handler + * => 0x1FC00000 + * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000 + * => 0x00247C00 +- * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000 +- * => 0X000881F0 ++ * sensor 1 interrupt: 0000 0000 0001 0010 0000 0011 1110 0000 ++ * => 0X001203E0 + * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111 + * => 0x0009001F + */ diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch new file mode 100644 index 0000000000..d09c2055a3 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch @@ -0,0 +1,149 @@ +From 9aad43ad3285fc21158fb416830a6156a9a31fa5 Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Tue, 7 Mar 2023 16:45:22 +0100 +Subject: [PATCH 15/42] thermal/drivers/mediatek/lvts_thermal: Add AP domain + for mt8195 + +Add MT8195 AP Domain support to LVTS Driver. + +Take the opportunity to update the comments to show calibration data +information related to the new domain. + +[dlezcano]: Massaged a bit the changelog + +Signed-off-by: Balsam CHIHI +Tested-by: Chen-Yu Tsai +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230307154524.118541-3-bchihi@baylibre.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 94 +++++++++++++++++++------ + 1 file changed, 74 insertions(+), 20 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -530,29 +530,33 @@ static int lvts_sensor_init(struct devic + * The efuse blob values follows the sensor enumeration per thermal + * controller. The decoding of the stream is as follow: + * +- * <--?-> <----big0 ???---> <-sensor0-> <-0-> +- * ------------------------------------------ +- * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 | +- * ------------------------------------------ ++ * stream index map for MCU Domain : + * +- * <--sensor1--><-0-> <----big1 ???---> <-sen +- * ------------------------------------------ +- * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD | +- * ------------------------------------------ ++ * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1-----> ++ * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 + * +- * sor0-> <-0-> <-sensor1-> <-0-> .......... +- * ------------------------------------------ +- * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD | +- * ------------------------------------------ ++ * <-----mcu-tc#1-----> <-----sensor#2-----> <-----sensor#3-----> ++ * 0x0A | 0x0B | 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12 + * +- * And so on ... ++ * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7-----> ++ * 0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 ++ * ++ * stream index map for AP Domain : ++ * ++ * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1-----> ++ * 0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A ++ * ++ * <-----ap--tc#1-----> <-----sensor#2-----> <-----sensor#3-----> ++ * 0x2B | 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33 ++ * ++ * <-----ap--tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> ++ * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B | 0x3C | 0x3D | 0x3E | 0x3F ++ * ++ * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8-----> ++ * 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48 + * + * The data description gives the offset of the calibration data in + * this bytes stream for each sensor. +- * +- * Each thermal controller can handle up to 4 sensors max, we don't +- * care if there are less as the array of calibration is sized to 4 +- * anyway. The unused sensor slot will be zeroed. + */ + static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, + const struct lvts_ctrl_data *lvts_ctrl_data, +@@ -1165,7 +1169,7 @@ static int lvts_remove(struct platform_d + return 0; + } + +-static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = { ++static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { + { + .cal_offset = { 0x04, 0x07 }, + .lvts_sensor = { +@@ -1200,13 +1204,63 @@ static const struct lvts_ctrl_data mt819 + } + }; + ++static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = { ++ { ++ .cal_offset = { 0x25, 0x28 }, ++ .lvts_sensor = { ++ { .dt_id = MT8195_AP_VPU0 }, ++ { .dt_id = MT8195_AP_VPU1 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x0, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, ++ }, ++ { ++ .cal_offset = { 0x2e, 0x31 }, ++ .lvts_sensor = { ++ { .dt_id = MT8195_AP_GPU0 }, ++ { .dt_id = MT8195_AP_GPU1 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x100, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, ++ }, ++ { ++ .cal_offset = { 0x37, 0x3a, 0x3d }, ++ .lvts_sensor = { ++ { .dt_id = MT8195_AP_VDEC }, ++ { .dt_id = MT8195_AP_IMG }, ++ { .dt_id = MT8195_AP_INFRA }, ++ }, ++ .num_lvts_sensor = 3, ++ .offset = 0x200, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, ++ }, ++ { ++ .cal_offset = { 0x43, 0x46 }, ++ .lvts_sensor = { ++ { .dt_id = MT8195_AP_CAM0 }, ++ { .dt_id = MT8195_AP_CAM1 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x300, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, ++ } ++}; ++ + static const struct lvts_data mt8195_lvts_mcu_data = { +- .lvts_ctrl = mt8195_lvts_data_ctrl, +- .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_data_ctrl), ++ .lvts_ctrl = mt8195_lvts_mcu_data_ctrl, ++ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl), ++}; ++ ++static const struct lvts_data mt8195_lvts_ap_data = { ++ .lvts_ctrl = mt8195_lvts_ap_data_ctrl, ++ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl), + }; + + static const struct of_device_id lvts_of_match[] = { + { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data }, ++ { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data }, + {}, + }; + MODULE_DEVICE_TABLE(of, lvts_of_match); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch b/target/linux/mediatek/patches-6.1/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch new file mode 100644 index 0000000000..a48ea3742b --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch @@ -0,0 +1,53 @@ +From 7105a86760bd9e4d107075cefc75016b693a5542 Mon Sep 17 00:00:00 2001 +From: AngeloGioacchino Del Regno +Date: Wed, 19 Apr 2023 08:11:45 +0200 +Subject: [PATCH 16/42] Revert "thermal/drivers/mediatek: Add delay after + thermal banks initialization" + +Some more testing revealed that this commit introduces a regression on some +MT8173 Chromebooks and at least on one MT6795 Sony Xperia M5 smartphone due +to the delay being apparently variable and machine specific. + +Another solution would be to delay for a bit more (~70ms) but this is not +feasible for two reasons: first of all, we're adding an even bigger delay +in a probe function; second, some machines need less, some may need even +more, making the msleep at probe solution highly suboptimal. + +This reverts commit 10debf8c2da8011c8009dd4b3f6d0ab85891c81b. + +Fixes: 10debf8c2da8 ("thermal/drivers/mediatek: Add delay after thermal banks initialization") +Reported-by: "kernelci.org bot" +Signed-off-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230419061146.22246-2-angelogioacchino.delregno@collabora.com +--- + drivers/thermal/mediatek/auxadc_thermal.c | 11 ++++++++--- + 1 file changed, 8 insertions(+), 3 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -816,6 +816,14 @@ static int mtk_thermal_bank_temperature( + mt, conf->bank_data[bank->id].sensors[i], raw); + + ++ /* ++ * The first read of a sensor often contains very high bogus ++ * temperature value. Filter these out so that the system does ++ * not immediately shut down. ++ */ ++ if (temp > 200000) ++ temp = 0; ++ + if (temp > max) + max = temp; + } +@@ -1273,9 +1281,6 @@ static int mtk_thermal_probe(struct plat + + platform_set_drvdata(pdev, mt); + +- /* Delay for thermal banks to be ready */ +- msleep(30); +- + tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, + &mtk_thermal_ops); + if (IS_ERR(tzdev)) { diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch b/target/linux/mediatek/patches-6.1/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch new file mode 100644 index 0000000000..aae87af5d1 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch @@ -0,0 +1,78 @@ +From 681b652c9dfc4037d4a55b2733e091a4e1a5de18 Mon Sep 17 00:00:00 2001 +From: AngeloGioacchino Del Regno +Date: Wed, 19 Apr 2023 08:11:46 +0200 +Subject: [PATCH 17/42] thermal/drivers/mediatek: Add temperature constraints + to validate read +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The AUXADC thermal v1 allows reading temperature range between -20°C to +150°C and any value out of this range is invalid. + +Add new definitions for MT8173_TEMP_{MIN_MAX} and a new small helper +mtk_thermal_temp_is_valid() to check if new readings are in range: if +not, we tell to the API that the reading is invalid by returning +THERMAL_TEMP_INVALID. + +It was chosen to introduce the helper function because, even though this +temperature range is realistically ok for all, it comes from a downstream +kernel driver for version 1, but here we also support v2 and v3 which may +may have wider constraints. + +Signed-off-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230419061146.22246-3-angelogioacchino.delregno@collabora.com +--- + drivers/thermal/mediatek/auxadc_thermal.c | 24 +++++++++++++++++------ + 1 file changed, 18 insertions(+), 6 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -116,6 +116,10 @@ + /* The calibration coefficient of sensor */ + #define MT8173_CALIBRATION 165 + ++/* Valid temperatures range */ ++#define MT8173_TEMP_MIN -20000 ++#define MT8173_TEMP_MAX 150000 ++ + /* + * Layout of the fuses providing the calibration data + * These macros could be used for MT8183, MT8173, MT2701, and MT2712. +@@ -689,6 +693,11 @@ static const struct mtk_thermal_data mt7 + .version = MTK_THERMAL_V3, + }; + ++static bool mtk_thermal_temp_is_valid(int temp) ++{ ++ return (temp >= MT8173_TEMP_MIN) && (temp <= MT8173_TEMP_MAX); ++} ++ + /** + * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius + * @mt: The thermal controller +@@ -815,14 +824,17 @@ static int mtk_thermal_bank_temperature( + temp = mt->raw_to_mcelsius( + mt, conf->bank_data[bank->id].sensors[i], raw); + +- + /* +- * The first read of a sensor often contains very high bogus +- * temperature value. Filter these out so that the system does +- * not immediately shut down. ++ * Depending on the filt/sen intervals and ADC polling time, ++ * we may need up to 60 milliseconds after initialization: this ++ * will result in the first reading containing an out of range ++ * temperature value. ++ * Validate the reading to both address the aforementioned issue ++ * and to eventually avoid bogus readings during runtime in the ++ * event that the AUXADC gets unstable due to high EMI, etc. + */ +- if (temp > 200000) +- temp = 0; ++ if (!mtk_thermal_temp_is_valid(temp)) ++ temp = THERMAL_TEMP_INVALID; + + if (temp > max) + max = temp; diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch new file mode 100644 index 0000000000..782684aacc --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch @@ -0,0 +1,53 @@ +From 458fa1d508de3f17e49d974a0158d9aeff273a58 Mon Sep 17 00:00:00 2001 +From: Kang Chen +Date: Wed, 19 Apr 2023 10:07:48 +0800 +Subject: [PATCH 18/42] thermal/drivers/mediatek: Use devm_of_iomap to avoid + resource leak in mtk_thermal_probe + +Smatch reports: +1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released. +2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released. + +The original code forgets to release iomap resource when handling errors, +fix it by switch to devm_of_iomap. + +Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system") +Signed-off-by: Kang Chen +Reviewed-by: Dongliang Mu +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn +--- + drivers/thermal/mediatek/auxadc_thermal.c | 14 ++++++++++++-- + 1 file changed, 12 insertions(+), 2 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -1232,7 +1232,12 @@ static int mtk_thermal_probe(struct plat + return -ENODEV; + } + +- auxadc_base = of_iomap(auxadc, 0); ++ auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL); ++ if (IS_ERR(auxadc_base)) { ++ of_node_put(auxadc); ++ return PTR_ERR(auxadc_base); ++ } ++ + auxadc_phys_base = of_get_phys_base(auxadc); + + of_node_put(auxadc); +@@ -1248,7 +1253,12 @@ static int mtk_thermal_probe(struct plat + return -ENODEV; + } + +- apmixed_base = of_iomap(apmixedsys, 0); ++ apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL); ++ if (IS_ERR(apmixed_base)) { ++ of_node_put(apmixedsys); ++ return PTR_ERR(apmixed_base); ++ } ++ + apmixed_phys_base = of_get_phys_base(apmixedsys); + + of_node_put(apmixedsys); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch b/target/linux/mediatek/patches-6.1/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch new file mode 100644 index 0000000000..d7896dbd60 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch @@ -0,0 +1,100 @@ +From 227d1856924ec00a4f5bdf5afcf77bc7f3f04e86 Mon Sep 17 00:00:00 2001 +From: Kang Chen +Date: Wed, 19 Apr 2023 10:07:49 +0800 +Subject: [PATCH 19/42] thermal/drivers/mediatek: Change clk_prepare_enable to + devm_clk_get_enabled in mtk_thermal_probe + +Use devm_clk_get_enabled to do automatic resource management. +Meanwhile, remove error handling labels in the probe function and +the whole remove function. + +Signed-off-by: Kang Chen +Reviewed-by: Dongliang Mu +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230419020749.621257-2-void0red@hust.edu.cn +--- + drivers/thermal/mediatek/auxadc_thermal.c | 44 +++++------------------ + 1 file changed, 9 insertions(+), 35 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -1206,14 +1206,6 @@ static int mtk_thermal_probe(struct plat + + mt->conf = of_device_get_match_data(&pdev->dev); + +- mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); +- if (IS_ERR(mt->clk_peri_therm)) +- return PTR_ERR(mt->clk_peri_therm); +- +- mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc"); +- if (IS_ERR(mt->clk_auxadc)) +- return PTR_ERR(mt->clk_auxadc); +- + mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); + if (IS_ERR(mt->thermal_base)) + return PTR_ERR(mt->thermal_base); +@@ -1272,16 +1264,18 @@ static int mtk_thermal_probe(struct plat + if (ret) + return ret; + +- ret = clk_prepare_enable(mt->clk_auxadc); +- if (ret) { ++ mt->clk_auxadc = devm_clk_get_enabled(&pdev->dev, "auxadc"); ++ if (IS_ERR(mt->clk_auxadc)) { ++ ret = PTR_ERR(mt->clk_auxadc); + dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); + return ret; + } + +- ret = clk_prepare_enable(mt->clk_peri_therm); +- if (ret) { ++ mt->clk_peri_therm = devm_clk_get_enabled(&pdev->dev, "therm"); ++ if (IS_ERR(mt->clk_peri_therm)) { ++ ret = PTR_ERR(mt->clk_peri_therm); + dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); +- goto err_disable_clk_auxadc; ++ return ret; + } + + mtk_thermal_turn_on_buffer(mt, apmixed_base); +@@ -1305,38 +1299,18 @@ static int mtk_thermal_probe(struct plat + + tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, + &mtk_thermal_ops); +- if (IS_ERR(tzdev)) { +- ret = PTR_ERR(tzdev); +- goto err_disable_clk_peri_therm; +- } ++ if (IS_ERR(tzdev)) ++ return PTR_ERR(tzdev); + + ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev); + if (ret) + dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs"); + + return 0; +- +-err_disable_clk_peri_therm: +- clk_disable_unprepare(mt->clk_peri_therm); +-err_disable_clk_auxadc: +- clk_disable_unprepare(mt->clk_auxadc); +- +- return ret; +-} +- +-static int mtk_thermal_remove(struct platform_device *pdev) +-{ +- struct mtk_thermal *mt = platform_get_drvdata(pdev); +- +- clk_disable_unprepare(mt->clk_peri_therm); +- clk_disable_unprepare(mt->clk_auxadc); +- +- return 0; + } + + static struct platform_driver mtk_thermal_driver = { + .probe = mtk_thermal_probe, +- .remove = mtk_thermal_remove, + .driver = { + .name = "mtk-thermal", + .of_match_table = mtk_thermal_of_match, diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch b/target/linux/mediatek/patches-6.1/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch new file mode 100644 index 0000000000..fd18a5365c --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch @@ -0,0 +1,36 @@ +From 655fe2533ac05323a07c19ba079bf2064e7741af Mon Sep 17 00:00:00 2001 +From: Rob Herring +Date: Sun, 19 Mar 2023 11:32:31 -0500 +Subject: [PATCH 20/42] thermal/drivers/mediatek: Use of_address_to_resource() + +Replace of_get_address() and of_translate_address() calls with single +call to of_address_to_resource(). + +Signed-off-by: Rob Herring +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230319163231.226738-1-robh@kernel.org +--- + drivers/thermal/mediatek/auxadc_thermal.c | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -979,14 +979,12 @@ static void mtk_thermal_init_bank(struct + + static u64 of_get_phys_base(struct device_node *np) + { +- u64 size64; +- const __be32 *regaddr_p; ++ struct resource res; + +- regaddr_p = of_get_address(np, 0, &size64, NULL); +- if (!regaddr_p) ++ if (of_address_to_resource(np, 0, &res)) + return OF_BAD_ADDR; + +- return of_translate_address(np, regaddr_p); ++ return res.start; + } + + static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf) diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch b/target/linux/mediatek/patches-6.1/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch new file mode 100644 index 0000000000..c3ff17d517 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch @@ -0,0 +1,57 @@ +From 2c380d07215e6fce3ac66cc5af059bc2c2a69f7a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ricardo=20Ca=C3=B1uelo?= +Date: Thu, 25 May 2023 14:18:11 +0200 +Subject: [PATCH 21/42] Revert "thermal/drivers/mediatek: Use devm_of_iomap to + avoid resource leak in mtk_thermal_probe" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26. + +That change was causing a regression in the generic-adc-thermal-probed +bootrr test as reported in the kernelci-results list [1]. +A proper rework will take longer, so revert it for now. + +[1] https://groups.io/g/kernelci-results/message/42660 + +Fixes: f05c7b7d9ea9 ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe") +Signed-off-by: Ricardo Cañuelo +Suggested-by: AngeloGioacchino Del Regno +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com +--- + drivers/thermal/mediatek/auxadc_thermal.c | 14 ++------------ + 1 file changed, 2 insertions(+), 12 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -1222,12 +1222,7 @@ static int mtk_thermal_probe(struct plat + return -ENODEV; + } + +- auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL); +- if (IS_ERR(auxadc_base)) { +- of_node_put(auxadc); +- return PTR_ERR(auxadc_base); +- } +- ++ auxadc_base = of_iomap(auxadc, 0); + auxadc_phys_base = of_get_phys_base(auxadc); + + of_node_put(auxadc); +@@ -1243,12 +1238,7 @@ static int mtk_thermal_probe(struct plat + return -ENODEV; + } + +- apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL); +- if (IS_ERR(apmixed_base)) { +- of_node_put(apmixedsys); +- return PTR_ERR(apmixed_base); +- } +- ++ apmixed_base = of_iomap(apmixedsys, 0); + apmixed_phys_base = of_get_phys_base(apmixedsys); + + of_node_put(apmixedsys); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch b/target/linux/mediatek/patches-6.1/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch new file mode 100644 index 0000000000..c4456529c1 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch @@ -0,0 +1,37 @@ +From 496f4b08981d8a788ad5a2073fa1c65a2af1862b Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Tue, 13 Jun 2023 17:13:16 +0800 +Subject: [PATCH 22/42] thermal/drivers/mediatek/lvts_thermal: Register thermal + zones as hwmon sensors + +Register thermal zones as hwmon sensors to let userspace read +temperatures using standard hwmon interface. + +Signed-off-by: Chen-Yu Tsai +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230613091317.1691247-1-wenst@chromium.org +--- + drivers/thermal/mediatek/lvts_thermal.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -19,6 +19,8 @@ + #include + #include + ++#include "../thermal_hwmon.h" ++ + #define LVTS_MONCTL0(__base) (__base + 0x0000) + #define LVTS_MONCTL1(__base) (__base + 0x0004) + #define LVTS_MONCTL2(__base) (__base + 0x0008) +@@ -996,6 +998,9 @@ static int lvts_ctrl_start(struct device + return PTR_ERR(tz); + } + ++ if (devm_thermal_add_hwmon_sysfs(dev, tz)) ++ dev_warn(dev, "zone %d: Failed to add hwmon sysfs attributes\n", dt_id); ++ + /* + * The thermal zone pointer will be needed in the + * interrupt handler, we store it in the sensor diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch b/target/linux/mediatek/patches-6.1/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch new file mode 100644 index 0000000000..22e7a954ed --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch @@ -0,0 +1,28 @@ +From 885b9768ce2a66ed5d250822aed53d5114c895da Mon Sep 17 00:00:00 2001 +From: Yangtao Li +Date: Tue, 20 Jun 2023 17:07:31 +0800 +Subject: [PATCH 23/42] thermal/drivers/mediatek/lvts_thermal: Remove redundant + msg in lvts_ctrl_start() + +The upper-layer devm_thermal_add_hwmon_sysfs() function can directly +print error information. + +Signed-off-by: Yangtao Li +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230620090732.50025-10-frank.li@vivo.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -998,8 +998,7 @@ static int lvts_ctrl_start(struct device + return PTR_ERR(tz); + } + +- if (devm_thermal_add_hwmon_sysfs(dev, tz)) +- dev_warn(dev, "zone %d: Failed to add hwmon sysfs attributes\n", dt_id); ++ devm_thermal_add_hwmon_sysfs(dev, tz); + + /* + * The thermal zone pointer will be needed in the diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch new file mode 100644 index 0000000000..bc67727423 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch @@ -0,0 +1,40 @@ +From 27b389d9f62c2174f95fe4002b11e77d4cb3ce80 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= + +Date: Thu, 6 Jul 2023 11:37:32 -0400 +Subject: [PATCH 25/42] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on + all controllers +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +There is a single IRQ handler for each LVTS thermal domain, and it is +supposed to check each of its underlying controllers for the origin of +the interrupt and clear its status. However due to a typo, only the +first controller was ever being handled, which resulted in the interrupt +never being cleared when it happened on the other controllers. Add the +missing index so interrupts are handled for all controllers. + +Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") +Reviewed-by: Matthias Brugger +Reviewed-by: AngeloGioacchino Del Regno +Tested-by: Chen-Yu Tsai +Signed-off-by: Nícolas F. R. A. Prado +Reviewed-by: Alexandre Mergnat +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230706153823.201943-2-nfraprado@collabora.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -451,7 +451,7 @@ static irqreturn_t lvts_irq_handler(int + + for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { + +- aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl); ++ aux = lvts_ctrl_irq_handler(&lvts_td->lvts_ctrl[i]); + if (aux != IRQ_HANDLED) + continue; + diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch new file mode 100644 index 0000000000..51d119c05b --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch @@ -0,0 +1,120 @@ +From 6d827142643ee10c13ff9a1d90f38fb399aa9fff Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= + +Date: Thu, 6 Jul 2023 11:37:33 -0400 +Subject: [PATCH 26/42] thermal/drivers/mediatek/lvts_thermal: Honor sensors in + immediate mode +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Each controller can be configured to operate on immediate or filtered +mode. On filtered mode, the sensors are enabled by setting the +corresponding bits in MONCTL0, while on immediate mode, by setting +MSRCTL1. + +Previously, the code would set MSRCTL1 for all four sensors when +configured to immediate mode, but given that the controller might not +have all four sensors connected, this would cause interrupts to trigger +for non-existent sensors. Fix this by handling the MSRCTL1 register +analogously to the MONCTL0: only enable the sensors that were declared. + +Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") +Reviewed-by: AngeloGioacchino Del Regno +Tested-by: Chen-Yu Tsai +Signed-off-by: Nícolas F. R. A. Prado +Reviewed-by: Alexandre Mergnat +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230706153823.201943-3-nfraprado@collabora.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 57 ++++++++++++++----------- + 1 file changed, 33 insertions(+), 24 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -897,24 +897,6 @@ static int lvts_ctrl_configure(struct de + writel(value, LVTS_MSRCTL0(lvts_ctrl->base)); + + /* +- * LVTS_MSRCTL1 : Measurement control +- * +- * Bits: +- * +- * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3 +- * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2 +- * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1 +- * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0 +- * +- * That configuration will ignore the filtering and the delays +- * introduced below in MONCTL1 and MONCTL2 +- */ +- if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) { +- value = BIT(9) | BIT(6) | BIT(5) | BIT(4); +- writel(value, LVTS_MSRCTL1(lvts_ctrl->base)); +- } +- +- /* + * LVTS_MONCTL1 : Period unit and group interval configuration + * + * The clock source of LVTS thermal controller is 26MHz. +@@ -979,6 +961,15 @@ static int lvts_ctrl_start(struct device + struct thermal_zone_device *tz; + u32 sensor_map = 0; + int i; ++ /* ++ * Bitmaps to enable each sensor on immediate and filtered modes, as ++ * described in MSRCTL1 and MONCTL0 registers below, respectively. ++ */ ++ u32 sensor_imm_bitmap[] = { BIT(4), BIT(5), BIT(6), BIT(9) }; ++ u32 sensor_filt_bitmap[] = { BIT(0), BIT(1), BIT(2), BIT(3) }; ++ ++ u32 *sensor_bitmap = lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE ? ++ sensor_imm_bitmap : sensor_filt_bitmap; + + for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) { + +@@ -1016,20 +1007,38 @@ static int lvts_ctrl_start(struct device + * map, so we can enable the temperature monitoring in + * the hardware thermal controller. + */ +- sensor_map |= BIT(i); ++ sensor_map |= sensor_bitmap[i]; + } + + /* +- * Bits: +- * 9: Single point access flow +- * 0-3: Enable sensing point 0-3 +- * + * The initialization of the thermal zones give us + * which sensor point to enable. If any thermal zone + * was not described in the device tree, it won't be + * enabled here in the sensor map. + */ +- writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); ++ if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) { ++ /* ++ * LVTS_MSRCTL1 : Measurement control ++ * ++ * Bits: ++ * ++ * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3 ++ * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2 ++ * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1 ++ * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0 ++ * ++ * That configuration will ignore the filtering and the delays ++ * introduced in MONCTL1 and MONCTL2 ++ */ ++ writel(sensor_map, LVTS_MSRCTL1(lvts_ctrl->base)); ++ } else { ++ /* ++ * Bits: ++ * 9: Single point access flow ++ * 0-3: Enable sensing point 0-3 ++ */ ++ writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); ++ } + + return 0; + } diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch b/target/linux/mediatek/patches-6.1/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch new file mode 100644 index 0000000000..bfbadee350 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch @@ -0,0 +1,77 @@ +From 93bb11dd19bdcc1fc97c7ceababd0db9fde128ad Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= + +Date: Thu, 6 Jul 2023 11:37:34 -0400 +Subject: [PATCH 27/42] thermal/drivers/mediatek/lvts_thermal: Use offset + threshold for IRQ +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +There are two kinds of temperature monitoring interrupts available: +* High Offset, Low Offset +* Hot, Hot to normal, Cold + +The code currently uses the hot/h2n/cold interrupts, however in a way +that doesn't work: the cold threshold is left uninitialized, which +prevents the other thresholds from ever triggering, and the h2n +interrupt is used as the lower threshold, which prevents the hot +interrupt from triggering again after the thresholds are updated by the +thermal framework, since a hot interrupt can only trigger again after +the hot to normal interrupt has been triggered. + +But better yet than addressing those issues, is to use the high/low +offset interrupts instead. This way only two thresholds need to be +managed, which have a simpler state machine, making them a better match +to the thermal framework's high and low thresholds. + +Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") +Signed-off-by: Nícolas F. R. A. Prado +Reviewed-by: Alexandre Mergnat +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230706153823.201943-4-nfraprado@collabora.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -298,9 +298,9 @@ static int lvts_set_trips(struct thermal + u32 raw_high = lvts_temp_to_raw(high); + + /* +- * Hot to normal temperature threshold ++ * Low offset temperature threshold + * +- * LVTS_H2NTHRE ++ * LVTS_OFFSETL + * + * Bits: + * +@@ -309,13 +309,13 @@ static int lvts_set_trips(struct thermal + if (low != -INT_MAX) { + pr_debug("%s: Setting low limit temperature interrupt: %d\n", + thermal_zone_device_type(tz), low); +- writel(raw_low, LVTS_H2NTHRE(base)); ++ writel(raw_low, LVTS_OFFSETL(base)); + } + + /* +- * Hot temperature threshold ++ * High offset temperature threshold + * +- * LVTS_HTHRE ++ * LVTS_OFFSETH + * + * Bits: + * +@@ -323,7 +323,7 @@ static int lvts_set_trips(struct thermal + */ + pr_debug("%s: Setting high limit temperature interrupt: %d\n", + thermal_zone_device_type(tz), high); +- writel(raw_high, LVTS_HTHRE(base)); ++ writel(raw_high, LVTS_OFFSETH(base)); + + return 0; + } diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch b/target/linux/mediatek/patches-6.1/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch new file mode 100644 index 0000000000..1c35d0ad19 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch @@ -0,0 +1,51 @@ +From 8f8cab9d3e90acf1db278ef44ad05f10aefb973f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= + +Date: Thu, 6 Jul 2023 11:37:35 -0400 +Subject: [PATCH 28/42] thermal/drivers/mediatek/lvts_thermal: Disable + undesired interrupts +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Out of the many interrupts supported by the hardware, the only ones of +interest to the driver currently are: +* The temperature went over the high offset threshold, for any of the + sensors +* The temperature went below the low offset threshold, for any of the + sensors +* The temperature went over the stage3 threshold + +These are the only thresholds configured by the driver through the +OFFSETH, OFFSETL, and PROTTC registers, respectively. + +The current interrupt mask in LVTS_MONINT_CONF, enables many more +interrupts, including data ready on sensors for both filtered and +immediate mode. These are not only not handled by the driver, but they +are also triggered too often, causing unneeded overhead. Disable these +unnecessary interrupts. + +The meaning of each bit can be seen in the comment describing +LVTS_MONINTST in the IRQ handler. + +Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") +Signed-off-by: Nícolas F. R. A. Prado +Reviewed-by: AngeloGioacchino Del Regno +Reviewed-by: Alexandre Mergnat +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230706153823.201943-5-nfraprado@collabora.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -65,7 +65,7 @@ + #define LVTS_HW_FILTER 0x2 + #define LVTS_TSSEL_CONF 0x13121110 + #define LVTS_CALSCALE_CONF 0x300 +-#define LVTS_MONINT_CONF 0x9FBF7BDE ++#define LVTS_MONINT_CONF 0x8300318C + + #define LVTS_INT_SENSOR0 0x0009001F + #define LVTS_INT_SENSOR1 0x001203E0 diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch b/target/linux/mediatek/patches-6.1/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch new file mode 100644 index 0000000000..60942fdb89 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch @@ -0,0 +1,70 @@ +From bd1ccf9408e6155564530af5e09b53ae497fe332 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= + +Date: Thu, 6 Jul 2023 11:37:36 -0400 +Subject: [PATCH 29/42] thermal/drivers/mediatek/lvts_thermal: Don't leave + threshold zeroed +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The thermal framework might leave the low threshold unset if there +aren't any lower trip points. This leaves the register zeroed, which +translates to a very high temperature for the low threshold. The +interrupt for this threshold is then immediately triggered, and the +state machine gets stuck, preventing any other temperature monitoring +interrupts to ever trigger. + +(The same happens by not setting the Cold or Hot to Normal thresholds +when using those) + +Set the unused threshold to a valid low value. This value was chosen so +that for any valid golden temperature read from the efuse, when the +value is converted to raw and back again to milliCelsius, the result +doesn't underflow. + +Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") +Signed-off-by: Nícolas F. R. A. Prado +Reviewed-by: Alexandre Mergnat +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230706153823.201943-6-nfraprado@collabora.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -83,6 +83,8 @@ + + #define LVTS_HW_SHUTDOWN_MT8195 105000 + ++#define LVTS_MINIMUM_THRESHOLD 20000 ++ + static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; + static int coeff_b = LVTS_COEFF_B; + +@@ -294,7 +296,7 @@ static int lvts_set_trips(struct thermal + { + struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); + void __iomem *base = lvts_sensor->base; +- u32 raw_low = lvts_temp_to_raw(low); ++ u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD); + u32 raw_high = lvts_temp_to_raw(high); + + /* +@@ -306,11 +308,9 @@ static int lvts_set_trips(struct thermal + * + * 14-0 : Raw temperature for threshold + */ +- if (low != -INT_MAX) { +- pr_debug("%s: Setting low limit temperature interrupt: %d\n", +- thermal_zone_device_type(tz), low); +- writel(raw_low, LVTS_OFFSETL(base)); +- } ++ pr_debug("%s: Setting low limit temperature interrupt: %d\n", ++ thermal_zone_device_type(tz), low); ++ writel(raw_low, LVTS_OFFSETL(base)); + + /* + * High offset temperature threshold diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch b/target/linux/mediatek/patches-6.1/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch new file mode 100644 index 0000000000..e99aa0cdfd --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch @@ -0,0 +1,156 @@ +From d4dd09968cab3249e6148e1c3fccb51824edb411 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= + +Date: Thu, 6 Jul 2023 11:37:37 -0400 +Subject: [PATCH 30/42] thermal/drivers/mediatek/lvts_thermal: Manage threshold + between sensors +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Each LVTS thermal controller can have up to four sensors, each capable +of triggering its own interrupt when its measured temperature crosses +the configured threshold. The threshold for each sensor is handled +separately by the thermal framework, since each one is registered with +its own thermal zone and trips. However, the temperature thresholds are +configured on the controller, and therefore are shared between all +sensors on that controller. + +When the temperature measured by the sensors is different enough to +cause the thermal framework to configure different thresholds for each +one, interrupts start triggering on sensors outside the last threshold +configured. + +To address the issue, track the thresholds required by each sensor and +only actually set the highest one in the hardware, and disable +interrupts for all sensors outside the current configured range. + +Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") +Signed-off-by: Nícolas F. R. A. Prado +Reviewed-by: Alexandre Mergnat +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230706153823.201943-7-nfraprado@collabora.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 69 +++++++++++++++++++++++++ + 1 file changed, 69 insertions(+) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -67,6 +67,11 @@ + #define LVTS_CALSCALE_CONF 0x300 + #define LVTS_MONINT_CONF 0x8300318C + ++#define LVTS_MONINT_OFFSET_SENSOR0 0xC ++#define LVTS_MONINT_OFFSET_SENSOR1 0x180 ++#define LVTS_MONINT_OFFSET_SENSOR2 0x3000 ++#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000 ++ + #define LVTS_INT_SENSOR0 0x0009001F + #define LVTS_INT_SENSOR1 0x001203E0 + #define LVTS_INT_SENSOR2 0x00247C00 +@@ -112,6 +117,8 @@ struct lvts_sensor { + void __iomem *base; + int id; + int dt_id; ++ int low_thresh; ++ int high_thresh; + }; + + struct lvts_ctrl { +@@ -121,6 +128,8 @@ struct lvts_ctrl { + int num_lvts_sensor; + int mode; + void __iomem *base; ++ int low_thresh; ++ int high_thresh; + }; + + struct lvts_domain { +@@ -292,12 +301,66 @@ static int lvts_get_temp(struct thermal_ + return 0; + } + ++static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) ++{ ++ u32 masks[] = { ++ LVTS_MONINT_OFFSET_SENSOR0, ++ LVTS_MONINT_OFFSET_SENSOR1, ++ LVTS_MONINT_OFFSET_SENSOR2, ++ LVTS_MONINT_OFFSET_SENSOR3, ++ }; ++ u32 value = 0; ++ int i; ++ ++ value = readl(LVTS_MONINT(lvts_ctrl->base)); ++ ++ for (i = 0; i < ARRAY_SIZE(masks); i++) { ++ if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh ++ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) ++ value |= masks[i]; ++ else ++ value &= ~masks[i]; ++ } ++ ++ writel(value, LVTS_MONINT(lvts_ctrl->base)); ++} ++ ++static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high) ++{ ++ int i; ++ ++ if (high > lvts_ctrl->high_thresh) ++ return true; ++ ++ for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) ++ if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh ++ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) ++ return false; ++ ++ return true; ++} ++ + static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) + { + struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); ++ struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]); + void __iomem *base = lvts_sensor->base; + u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD); + u32 raw_high = lvts_temp_to_raw(high); ++ bool should_update_thresh; ++ ++ lvts_sensor->low_thresh = low; ++ lvts_sensor->high_thresh = high; ++ ++ should_update_thresh = lvts_should_update_thresh(lvts_ctrl, high); ++ if (should_update_thresh) { ++ lvts_ctrl->high_thresh = high; ++ lvts_ctrl->low_thresh = low; ++ } ++ lvts_update_irq_mask(lvts_ctrl); ++ ++ if (!should_update_thresh) ++ return 0; + + /* + * Low offset temperature threshold +@@ -521,6 +584,9 @@ static int lvts_sensor_init(struct devic + */ + lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ? + imm_regs[i] : msr_regs[i]; ++ ++ lvts_sensor[i].low_thresh = INT_MIN; ++ lvts_sensor[i].high_thresh = INT_MIN; + }; + + lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor; +@@ -688,6 +754,9 @@ static int lvts_ctrl_init(struct device + */ + lvts_ctrl[i].hw_tshut_raw_temp = + lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp); ++ ++ lvts_ctrl[i].low_thresh = INT_MIN; ++ lvts_ctrl[i].high_thresh = INT_MIN; + } + + /* diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch b/target/linux/mediatek/patches-6.1/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch new file mode 100644 index 0000000000..9ce3eeb74b --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch @@ -0,0 +1,29 @@ +From 5af4904adc8b840987000724977c13c706d3b7d8 Mon Sep 17 00:00:00 2001 +From: Minjie Du +Date: Thu, 13 Jul 2023 12:24:12 +0800 +Subject: [PATCH 31/42] thermal/drivers/mediatek/lvts: Fix parameter check in + lvts_debugfs_init() + +The documentation says "If an error occurs, ERR_PTR(-ERROR) will be +returned" but the current code checks against a NULL pointer returned. + +Fix this by checking if IS_ERR(). + +Signed-off-by: Minjie Du +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230713042413.2519-1-duminjie@vivo.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -201,7 +201,7 @@ static int lvts_debugfs_init(struct devi + int i; + + lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL); +- if (!lvts_td->dom_dentry) ++ if (IS_ERR(lvts_td->dom_dentry)) + return 0; + + for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch b/target/linux/mediatek/patches-6.1/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch new file mode 100644 index 0000000000..4841054917 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch @@ -0,0 +1,33 @@ +From 6186be80317d1dbda34d35c06c084a083938f2d3 Mon Sep 17 00:00:00 2001 +From: Chen Jiahao +Date: Wed, 2 Aug 2023 17:45:27 +0800 +Subject: [PATCH 32/42] thermal/drivers/mediatek: Clean up redundant + dev_err_probe() + +Referring to platform_get_irq()'s definition, the return value has +already been checked if ret < 0, and printed via dev_err_probe(). +Calling dev_err_probe() one more time outside platform_get_irq() +is obviously redundant. + +Removing dev_err_probe() outside platform_get_irq() to clean up +above problem. + +Signed-off-by: Chen Jiahao +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230802094527.988842-1-chenjiahao16@huawei.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -1216,7 +1216,7 @@ static int lvts_probe(struct platform_de + + irq = platform_get_irq(pdev, 0); + if (irq < 0) +- return dev_err_probe(dev, irq, "No irq resource\n"); ++ return irq; + + ret = lvts_domain_init(dev, lvts_td, lvts_data); + if (ret) diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch new file mode 100644 index 0000000000..c88bf984fa --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch @@ -0,0 +1,95 @@ +From c2ab54ab0425388e65901a7af2fbf69ead968708 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= + +Date: Thu, 13 Jul 2023 11:42:37 -0400 +Subject: [PATCH 33/42] thermal/drivers/mediatek/lvts_thermal: Make readings + valid in filtered mode +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Currently, when a controller is configured to use filtered mode, thermal +readings are valid only about 30% of the time. + +Upon testing, it was noticed that lowering any of the interval settings +resulted in an improved rate of valid data. The same was observed when +decreasing the number of samples for each sensor (which also results in +quicker measurements). + +Retrying the read with a timeout longer than the time it takes to +resample (about 344us with these settings and 4 sensors) also improves +the rate. + +Lower all timing settings to the minimum, configure the filtering to +single sample, and poll the measurement register for at least one period +to improve the data validity on filtered mode. With these changes in +place, out of 100000 reads, a single one failed, ie 99.999% of the data +was valid. + +Reviewed-by: Chen-Yu Tsai +Tested-by: Chen-Yu Tsai +Signed-off-by: Nícolas F. R. A. Prado +Reviewed-by: Alexandre Mergnat +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230713154743.611870-1-nfraprado@collabora.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 19 ++++++++++++------- + 1 file changed, 12 insertions(+), 7 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -58,11 +58,11 @@ + #define LVTS_PROTTC(__base) (__base + 0x00CC) + #define LVTS_CLKEN(__base) (__base + 0x00E4) + +-#define LVTS_PERIOD_UNIT ((118 * 1000) / (256 * 38)) +-#define LVTS_GROUP_INTERVAL 1 +-#define LVTS_FILTER_INTERVAL 1 +-#define LVTS_SENSOR_INTERVAL 1 +-#define LVTS_HW_FILTER 0x2 ++#define LVTS_PERIOD_UNIT 0 ++#define LVTS_GROUP_INTERVAL 0 ++#define LVTS_FILTER_INTERVAL 0 ++#define LVTS_SENSOR_INTERVAL 0 ++#define LVTS_HW_FILTER 0x0 + #define LVTS_TSSEL_CONF 0x13121110 + #define LVTS_CALSCALE_CONF 0x300 + #define LVTS_MONINT_CONF 0x8300318C +@@ -86,6 +86,9 @@ + #define LVTS_MSR_IMMEDIATE_MODE 0 + #define LVTS_MSR_FILTERED_MODE 1 + ++#define LVTS_MSR_READ_TIMEOUT_US 400 ++#define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) ++ + #define LVTS_HW_SHUTDOWN_MT8195 105000 + + #define LVTS_MINIMUM_THRESHOLD 20000 +@@ -268,6 +271,7 @@ static int lvts_get_temp(struct thermal_ + struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); + void __iomem *msr = lvts_sensor->msr; + u32 value; ++ int rc; + + /* + * Measurement registers: +@@ -280,7 +284,8 @@ static int lvts_get_temp(struct thermal_ + * 16 : Valid temperature + * 15-0 : Raw temperature + */ +- value = readl(msr); ++ rc = readl_poll_timeout(msr, value, value & BIT(16), ++ LVTS_MSR_READ_WAIT_US, LVTS_MSR_READ_TIMEOUT_US); + + /* + * As the thermal zone temperature will read before the +@@ -293,7 +298,7 @@ static int lvts_get_temp(struct thermal_ + * functionning temperature and directly jump to a system + * shutdown. + */ +- if (!(value & BIT(16))) ++ if (rc) + return -EAGAIN; + + *temp = lvts_raw_to_temp(value & 0xFFFF); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch b/target/linux/mediatek/patches-6.1/830-v6.4-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch new file mode 100644 index 0000000000..994461cdb1 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch @@ -0,0 +1,30 @@ +From c864ff9de3b225b43bb8e08dedb223632323e059 Mon Sep 17 00:00:00 2001 +From: Andrei Coardos +Date: Fri, 11 Aug 2023 22:28:47 +0300 +Subject: [PATCH 34/42] thermal/drivers/mediatek/auxadc_thermal: Removed call + to platform_set_drvdata() + +This function call was found to be unnecessary as there is no equivalent +platform_get_drvdata() call to access the private data of the driver. Also, +the private data is defined in this driver, so there is no risk of it being +accessed outside of this driver file. + +Signed-off-by: Andrei Coardos +Reviewed-by: Alexandru Ardelean +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230811192847.3838-1-aboutphysycs@gmail.com +--- + drivers/thermal/mediatek/auxadc_thermal.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -1283,8 +1283,6 @@ static int mtk_thermal_probe(struct plat + mtk_thermal_init_bank(mt, i, apmixed_phys_base, + auxadc_phys_base, ctrl_id); + +- platform_set_drvdata(pdev, mt); +- + tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, + &mtk_thermal_ops); + if (IS_ERR(tzdev)) diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-39-thermal-lvts-Convert-to-platform-remove-callback-ret.patch b/target/linux/mediatek/patches-6.1/830-v6.4-39-thermal-lvts-Convert-to-platform-remove-callback-ret.patch new file mode 100644 index 0000000000..b3bfa37458 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-39-thermal-lvts-Convert-to-platform-remove-callback-ret.patch @@ -0,0 +1,58 @@ +From 6cf96078969ec00b873db99bae4e47001290685e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= +Date: Wed, 27 Sep 2023 21:37:23 +0200 +Subject: [PATCH 35/42] thermal: lvts: Convert to platform remove callback + returning void +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The .remove() callback for a platform driver returns an int which makes +many driver authors wrongly assume it's possible to do error handling by +returning an error code. However the value returned is ignored (apart +from emitting a warning) and this typically results in resource leaks. + +To improve here there is a quest to make the remove callback return +void. In the first step of this quest all drivers are converted to +.remove_new(), which already returns void. Eventually after all drivers +are converted, .remove_new() will be renamed to .remove(). + +Trivially convert this driver from always returning zero in the remove +callback to the void returning variant. + +Signed-off-by: Uwe Kleine-König +Acked-by: Daniel Lezcano +Signed-off-by: Rafael J. Wysocki +--- + drivers/thermal/mediatek/lvts_thermal.c | 6 ++---- + 1 file changed, 2 insertions(+), 4 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -1241,7 +1241,7 @@ static int lvts_probe(struct platform_de + return 0; + } + +-static int lvts_remove(struct platform_device *pdev) ++static void lvts_remove(struct platform_device *pdev) + { + struct lvts_domain *lvts_td; + int i; +@@ -1252,8 +1252,6 @@ static int lvts_remove(struct platform_d + lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false); + + lvts_debugfs_exit(lvts_td); +- +- return 0; + } + + static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { +@@ -1354,7 +1352,7 @@ MODULE_DEVICE_TABLE(of, lvts_of_match); + + static struct platform_driver lvts_driver = { + .probe = lvts_probe, +- .remove = lvts_remove, ++ .remove_new = lvts_remove, + .driver = { + .name = "mtk-lvts-thermal", + .of_match_table = lvts_of_match, diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-40-thermal-drivers-mediatek-lvts_thermal-Make-coeff-con.patch b/target/linux/mediatek/patches-6.1/830-v6.4-40-thermal-drivers-mediatek-lvts_thermal-Make-coeff-con.patch new file mode 100644 index 0000000000..16a32f564b --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-40-thermal-drivers-mediatek-lvts_thermal-Make-coeff-con.patch @@ -0,0 +1,198 @@ +From 26cc18a3d6d9eac21c4f4b4bb96147b2c6617c86 Mon Sep 17 00:00:00 2001 +From: Frank Wunderlich +Date: Fri, 22 Sep 2023 07:50:19 +0200 +Subject: [PATCH 36/42] thermal/drivers/mediatek/lvts_thermal: Make coeff + configurable + +The upcoming mt7988 has different temperature coefficients so we +cannot use constants in the functions lvts_golden_temp_init, +lvts_golden_temp_init and lvts_raw_to_temp anymore. + +Add a field in the lvts_ctrl pointing to the lvts_data which now +contains the soc-specific temperature coefficents. + +To make the code better readable, rename static int coeff_b to +golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset. + +Signed-off-by: Frank Wunderlich +Reviewed-by: AngeloGioacchino Del Regno +Tested-by: Daniel Golle +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230922055020.6436-4-linux@fw-web.de +--- + drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++--------- + 1 file changed, 34 insertions(+), 17 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -80,8 +80,8 @@ + #define LVTS_SENSOR_MAX 4 + #define LVTS_GOLDEN_TEMP_MAX 62 + #define LVTS_GOLDEN_TEMP_DEFAULT 50 +-#define LVTS_COEFF_A -250460 +-#define LVTS_COEFF_B 250460 ++#define LVTS_COEFF_A_MT8195 -250460 ++#define LVTS_COEFF_B_MT8195 250460 + + #define LVTS_MSR_IMMEDIATE_MODE 0 + #define LVTS_MSR_FILTERED_MODE 1 +@@ -94,7 +94,7 @@ + #define LVTS_MINIMUM_THRESHOLD 20000 + + static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; +-static int coeff_b = LVTS_COEFF_B; ++static int golden_temp_offset; + + struct lvts_sensor_data { + int dt_id; +@@ -112,6 +112,8 @@ struct lvts_ctrl_data { + struct lvts_data { + const struct lvts_ctrl_data *lvts_ctrl; + int num_lvts_ctrl; ++ int temp_factor; ++ int temp_offset; + }; + + struct lvts_sensor { +@@ -126,6 +128,7 @@ struct lvts_sensor { + + struct lvts_ctrl { + struct lvts_sensor sensors[LVTS_SENSOR_MAX]; ++ const struct lvts_data *lvts_data; + u32 calibration[LVTS_SENSOR_MAX]; + u32 hw_tshut_raw_temp; + int num_lvts_sensor; +@@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvt + + #endif + +-static int lvts_raw_to_temp(u32 raw_temp) ++static int lvts_raw_to_temp(u32 raw_temp, int temp_factor) + { + int temperature; + +- temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14; +- temperature += coeff_b; ++ temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14; ++ temperature += golden_temp_offset; + + return temperature; + } + +-static u32 lvts_temp_to_raw(int temperature) ++static u32 lvts_temp_to_raw(int temperature, int temp_factor) + { +- u32 raw_temp = ((s64)(coeff_b - temperature)) << 14; ++ u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14; + +- raw_temp = div_s64(raw_temp, -LVTS_COEFF_A); ++ raw_temp = div_s64(raw_temp, -temp_factor); + + return raw_temp; + } +@@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperat + static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) + { + struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); ++ struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, ++ sensors[lvts_sensor->id]); ++ const struct lvts_data *lvts_data = lvts_ctrl->lvts_data; + void __iomem *msr = lvts_sensor->msr; + u32 value; + int rc; +@@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_ + if (rc) + return -EAGAIN; + +- *temp = lvts_raw_to_temp(value & 0xFFFF); ++ *temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor); + + return 0; + } +@@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(st + static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) + { + struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); +- struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]); ++ struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, ++ sensors[lvts_sensor->id]); ++ const struct lvts_data *lvts_data = lvts_ctrl->lvts_data; + void __iomem *base = lvts_sensor->base; +- u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD); +- u32 raw_high = lvts_temp_to_raw(high); ++ u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD, ++ lvts_data->temp_factor); ++ u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor); + bool should_update_thresh; + + lvts_sensor->low_thresh = low; +@@ -692,7 +701,7 @@ static int lvts_calibration_read(struct + return 0; + } + +-static int lvts_golden_temp_init(struct device *dev, u32 *value) ++static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset) + { + u32 gt; + +@@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct + if (gt && gt < LVTS_GOLDEN_TEMP_MAX) + golden_temp = gt; + +- coeff_b = golden_temp * 500 + LVTS_COEFF_B; ++ golden_temp_offset = golden_temp * 500 + temp_offset; + + return 0; + } +@@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device + * The golden temp information is contained in the first chunk + * of efuse data. + */ +- ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib); ++ ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset); + if (ret) + return ret; + +@@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device + for (i = 0; i < lvts_data->num_lvts_ctrl; i++) { + + lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset; ++ lvts_ctrl[i].lvts_data = lvts_data; + + ret = lvts_sensor_init(dev, &lvts_ctrl[i], + &lvts_data->lvts_ctrl[i]); +@@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device + * after initializing the calibration. + */ + lvts_ctrl[i].hw_tshut_raw_temp = +- lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp); ++ lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp, ++ lvts_data->temp_factor); + + lvts_ctrl[i].low_thresh = INT_MIN; + lvts_ctrl[i].high_thresh = INT_MIN; +@@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_de + if (irq < 0) + return irq; + ++ golden_temp_offset = lvts_data->temp_offset; ++ + ret = lvts_domain_init(dev, lvts_td, lvts_data); + if (ret) + return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n"); +@@ -1336,11 +1349,15 @@ static const struct lvts_ctrl_data mt819 + static const struct lvts_data mt8195_lvts_mcu_data = { + .lvts_ctrl = mt8195_lvts_mcu_data_ctrl, + .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl), ++ .temp_factor = LVTS_COEFF_A_MT8195, ++ .temp_offset = LVTS_COEFF_B_MT8195, + }; + + static const struct lvts_data mt8195_lvts_ap_data = { + .lvts_ctrl = mt8195_lvts_ap_data_ctrl, + .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl), ++ .temp_factor = LVTS_COEFF_A_MT8195, ++ .temp_offset = LVTS_COEFF_B_MT8195, + }; + + static const struct of_device_id lvts_of_match[] = { diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-41-dt-bindings-thermal-mediatek-Add-LVTS-thermal-sensor.patch b/target/linux/mediatek/patches-6.1/830-v6.4-41-dt-bindings-thermal-mediatek-Add-LVTS-thermal-sensor.patch new file mode 100644 index 0000000000..1c2146f43f --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-41-dt-bindings-thermal-mediatek-Add-LVTS-thermal-sensor.patch @@ -0,0 +1,35 @@ +From be2cc09bd5b46f13629d4fcdeac7ad1b18bb1a0b Mon Sep 17 00:00:00 2001 +From: Frank Wunderlich +Date: Fri, 22 Sep 2023 07:50:18 +0200 +Subject: [PATCH] dt-bindings: thermal: mediatek: Add LVTS thermal sensors for + mt7988 + +Add sensor constants for MT7988. + +Signed-off-by: Frank Wunderlich +Reviewed-by: AngeloGioacchino Del Regno +Acked-by: Conor Dooley +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230922055020.6436-3-linux@fw-web.de +--- + include/dt-bindings/thermal/mediatek,lvts-thermal.h | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h ++++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h +@@ -7,6 +7,15 @@ + #ifndef __MEDIATEK_LVTS_DT_H + #define __MEDIATEK_LVTS_DT_H + ++#define MT7988_CPU_0 0 ++#define MT7988_CPU_1 1 ++#define MT7988_ETH2P5G_0 2 ++#define MT7988_ETH2P5G_1 3 ++#define MT7988_TOPS_0 4 ++#define MT7988_TOPS_1 5 ++#define MT7988_ETHWARP_0 6 ++#define MT7988_ETHWARP_1 7 ++ + #define MT8195_MCU_BIG_CPU0 0 + #define MT8195_MCU_BIG_CPU1 1 + #define MT8195_MCU_BIG_CPU2 2 diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-42-thermal-drivers-mediatek-lvts_thermal-Add-mt7988-sup.patch b/target/linux/mediatek/patches-6.1/830-v6.4-42-thermal-drivers-mediatek-lvts_thermal-Add-mt7988-sup.patch new file mode 100644 index 0000000000..97c803a820 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-42-thermal-drivers-mediatek-lvts_thermal-Add-mt7988-sup.patch @@ -0,0 +1,91 @@ +From 9924e9b91b43aaa1610a1d59c4caa43785948cf6 Mon Sep 17 00:00:00 2001 +From: Frank Wunderlich +Date: Fri, 22 Sep 2023 07:50:20 +0200 +Subject: [PATCH 37/42] thermal/drivers/mediatek/lvts_thermal: Add mt7988 + support + +Add Support for Mediatek Filogic 880/MT7988 LVTS. + +Signed-off-by: Frank Wunderlich +Tested-by: Daniel Golle +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230922055020.6436-5-linux@fw-web.de +--- + drivers/thermal/mediatek/lvts_thermal.c | 38 +++++++++++++++++++++++++ + 1 file changed, 38 insertions(+) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -82,6 +82,8 @@ + #define LVTS_GOLDEN_TEMP_DEFAULT 50 + #define LVTS_COEFF_A_MT8195 -250460 + #define LVTS_COEFF_B_MT8195 250460 ++#define LVTS_COEFF_A_MT7988 -204650 ++#define LVTS_COEFF_B_MT7988 204650 + + #define LVTS_MSR_IMMEDIATE_MODE 0 + #define LVTS_MSR_FILTERED_MODE 1 +@@ -89,6 +91,7 @@ + #define LVTS_MSR_READ_TIMEOUT_US 400 + #define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) + ++#define LVTS_HW_SHUTDOWN_MT7988 105000 + #define LVTS_HW_SHUTDOWN_MT8195 105000 + + #define LVTS_MINIMUM_THRESHOLD 20000 +@@ -1267,6 +1270,33 @@ static void lvts_remove(struct platform_ + lvts_debugfs_exit(lvts_td); + } + ++static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = { ++ { ++ .cal_offset = { 0x00, 0x04, 0x08, 0x0c }, ++ .lvts_sensor = { ++ { .dt_id = MT7988_CPU_0 }, ++ { .dt_id = MT7988_CPU_1 }, ++ { .dt_id = MT7988_ETH2P5G_0 }, ++ { .dt_id = MT7988_ETH2P5G_1 } ++ }, ++ .num_lvts_sensor = 4, ++ .offset = 0x0, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988, ++ }, ++ { ++ .cal_offset = { 0x14, 0x18, 0x1c, 0x20 }, ++ .lvts_sensor = { ++ { .dt_id = MT7988_TOPS_0}, ++ { .dt_id = MT7988_TOPS_1}, ++ { .dt_id = MT7988_ETHWARP_0}, ++ { .dt_id = MT7988_ETHWARP_1} ++ }, ++ .num_lvts_sensor = 4, ++ .offset = 0x100, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988, ++ } ++}; ++ + static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { + { + .cal_offset = { 0x04, 0x07 }, +@@ -1346,6 +1376,13 @@ static const struct lvts_ctrl_data mt819 + } + }; + ++static const struct lvts_data mt7988_lvts_ap_data = { ++ .lvts_ctrl = mt7988_lvts_ap_data_ctrl, ++ .num_lvts_ctrl = ARRAY_SIZE(mt7988_lvts_ap_data_ctrl), ++ .temp_factor = LVTS_COEFF_A_MT7988, ++ .temp_offset = LVTS_COEFF_B_MT7988, ++}; ++ + static const struct lvts_data mt8195_lvts_mcu_data = { + .lvts_ctrl = mt8195_lvts_mcu_data_ctrl, + .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl), +@@ -1361,6 +1398,7 @@ static const struct lvts_data mt8195_lvt + }; + + static const struct of_device_id lvts_of_match[] = { ++ { .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data }, + { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data }, + { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data }, + {}, diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-43-thermal-drivers-mediatek-lvts_thermal-Fix-error-chec.patch b/target/linux/mediatek/patches-6.1/830-v6.4-43-thermal-drivers-mediatek-lvts_thermal-Fix-error-chec.patch new file mode 100644 index 0000000000..5b212a2a37 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-43-thermal-drivers-mediatek-lvts_thermal-Fix-error-chec.patch @@ -0,0 +1,30 @@ +From fb1bbb5b63e4e3c788a978724749ced57d208054 Mon Sep 17 00:00:00 2001 +From: Minjie Du +Date: Thu, 21 Sep 2023 17:10:50 +0800 +Subject: [PATCH 38/42] thermal/drivers/mediatek/lvts_thermal: Fix error check + in lvts_debugfs_init() + +debugfs_create_dir() function returns an error value embedded in +the pointer (PTR_ERR). Evaluate the return value using IS_ERR +rather than checking for NULL. + +Signed-off-by: Minjie Du +Reviewed-by: Alexandre Mergnat +Reviewed-by: Chen-Yu Tsai +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230921091057.3812-1-duminjie@vivo.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -219,7 +219,7 @@ static int lvts_debugfs_init(struct devi + + sprintf(name, "controller%d", i); + dentry = debugfs_create_dir(name, lvts_td->dom_dentry); +- if (!dentry) ++ if (IS_ERR(dentry)) + continue; + + regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch b/target/linux/mediatek/patches-6.1/830-v6.4-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch new file mode 100644 index 0000000000..88f383c4ae --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch @@ -0,0 +1,33 @@ +From e6f43063f2fe9f08b34797bc6d223f7d63b01910 Mon Sep 17 00:00:00 2001 +From: Markus Schneider-Pargmann +Date: Mon, 18 Sep 2023 12:07:06 +0200 +Subject: [PATCH 39/42] thermal/drivers/mediatek: Fix probe for THERMAL_V2 + +Fix the probe function to call mtk_thermal_release_periodic_ts for +everything != MTK_THERMAL_V1. This was accidentally changed from V1 +to V2 in the original patch. + +Reported-by: Frank Wunderlich +Closes: https://lore.kernel.org/lkml/B0B3775B-B8D1-4284-814F-4F41EC22F532@public-files.de/ +Reported-by: Daniel Lezcano +Closes: https://lore.kernel.org/lkml/07a569b9-e691-64ea-dd65-3b49842af33d@linaro.org/ +Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks") +Signed-off-by: Markus Schneider-Pargmann +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20230918100706.1229239-1-msp@baylibre.com +--- + drivers/thermal/mediatek/auxadc_thermal.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -1268,7 +1268,7 @@ static int mtk_thermal_probe(struct plat + + mtk_thermal_turn_on_buffer(mt, apmixed_base); + +- if (mt->conf->version != MTK_THERMAL_V2) ++ if (mt->conf->version != MTK_THERMAL_V1) + mtk_thermal_release_periodic_ts(mt, auxadc_base); + + if (mt->conf->version == MTK_THERMAL_V1) diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-45-thermal-drivers-mediatek-lvts_thermal-Add-suspend-an.patch b/target/linux/mediatek/patches-6.1/830-v6.4-45-thermal-drivers-mediatek-lvts_thermal-Add-suspend-an.patch new file mode 100644 index 0000000000..7b4b124b56 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.4-45-thermal-drivers-mediatek-lvts_thermal-Add-suspend-an.patch @@ -0,0 +1,83 @@ +From a1d874ef3376295ee8ed89b3b5315f4c840ff00b Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Tue, 17 Oct 2023 21:05:42 +0200 +Subject: [PATCH 40/42] thermal/drivers/mediatek/lvts_thermal: Add suspend and + resume +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add suspend and resume support to LVTS driver. + +Signed-off-by: Balsam CHIHI +[bero@baylibre.com: suspend/resume in noirq phase] +Co-developed-by: Bernhard Rosenkränzer +Signed-off-by: Bernhard Rosenkränzer +Reviewed-by: Matthias Brugger +Reviewed-by: Alexandre Mergnat +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20231017190545.157282-3-bero@baylibre.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 37 +++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -1297,6 +1297,38 @@ static const struct lvts_ctrl_data mt798 + } + }; + ++static int lvts_suspend(struct device *dev) ++{ ++ struct lvts_domain *lvts_td; ++ int i; ++ ++ lvts_td = dev_get_drvdata(dev); ++ ++ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) ++ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false); ++ ++ clk_disable_unprepare(lvts_td->clk); ++ ++ return 0; ++} ++ ++static int lvts_resume(struct device *dev) ++{ ++ struct lvts_domain *lvts_td; ++ int i, ret; ++ ++ lvts_td = dev_get_drvdata(dev); ++ ++ ret = clk_prepare_enable(lvts_td->clk); ++ if (ret) ++ return ret; ++ ++ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) ++ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], true); ++ ++ return 0; ++} ++ + static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { + { + .cal_offset = { 0x04, 0x07 }, +@@ -1405,12 +1437,17 @@ static const struct of_device_id lvts_of + }; + MODULE_DEVICE_TABLE(of, lvts_of_match); + ++static const struct dev_pm_ops lvts_pm_ops = { ++ NOIRQ_SYSTEM_SLEEP_PM_OPS(lvts_suspend, lvts_resume) ++}; ++ + static struct platform_driver lvts_driver = { + .probe = lvts_probe, + .remove_new = lvts_remove, + .driver = { + .name = "mtk-lvts-thermal", + .of_match_table = lvts_of_match, ++ .pm = &lvts_pm_ops, + }, + }; + module_platform_driver(lvts_driver); diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-46-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch b/target/linux/mediatek/patches-6.1/830-v6.7-46-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch new file mode 100644 index 0000000000..c278168610 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.7-46-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch @@ -0,0 +1,49 @@ +From 0bb4937b58ab712f158588376dbac97f8e9df68e Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Tue, 17 Oct 2023 21:05:41 +0200 +Subject: [PATCH] dt-bindings: thermal: mediatek: Add LVTS thermal controller + definition for mt8192 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add LVTS thermal controller definition for MT8192. + +Signed-off-by: Balsam CHIHI +Reviewed-by: AngeloGioacchino Del Regno +Acked-by: Krzysztof Kozlowski +Signed-off-by: Bernhard Rosenkränzer +Reviewed-by: Matthias Brugger +Reviewed-by: Alexandre Mergnat +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20231017190545.157282-2-bero@baylibre.com +--- + .../thermal/mediatek,lvts-thermal.h | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h ++++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h +@@ -35,4 +35,23 @@ + #define MT8195_AP_CAM0 15 + #define MT8195_AP_CAM1 16 + ++#define MT8192_MCU_BIG_CPU0 0 ++#define MT8192_MCU_BIG_CPU1 1 ++#define MT8192_MCU_BIG_CPU2 2 ++#define MT8192_MCU_BIG_CPU3 3 ++#define MT8192_MCU_LITTLE_CPU0 4 ++#define MT8192_MCU_LITTLE_CPU1 5 ++#define MT8192_MCU_LITTLE_CPU2 6 ++#define MT8192_MCU_LITTLE_CPU3 7 ++ ++#define MT8192_AP_VPU0 8 ++#define MT8192_AP_VPU1 9 ++#define MT8192_AP_GPU0 10 ++#define MT8192_AP_GPU1 11 ++#define MT8192_AP_INFRA 12 ++#define MT8192_AP_CAM 13 ++#define MT8192_AP_MD0 14 ++#define MT8192_AP_MD1 15 ++#define MT8192_AP_MD2 16 ++ + #endif /* __MEDIATEK_LVTS_DT_H */ diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-47-thermal-drivers-mediatek-lvts_thermal-Add-mt8192-sup.patch b/target/linux/mediatek/patches-6.1/830-v6.7-47-thermal-drivers-mediatek-lvts_thermal-Add-mt8192-sup.patch new file mode 100644 index 0000000000..6d68a6cd57 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.7-47-thermal-drivers-mediatek-lvts_thermal-Add-mt8192-sup.patch @@ -0,0 +1,151 @@ +From 7d8b3864b38d881cf105328ff8569f47446811ad Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Tue, 17 Oct 2023 21:05:43 +0200 +Subject: [PATCH 41/42] thermal/drivers/mediatek/lvts_thermal: Add mt8192 + support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add LVTS Driver support for MT8192. + +Co-developed-by: Nícolas F. R. A. Prado +Signed-off-by: Nícolas F. R. A. Prado +Signed-off-by: Balsam CHIHI +Reviewed-by: Nícolas F. R. A. Prado +[bero@baylibre.com: cosmetic changes, rebase] +Signed-off-by: Bernhard Rosenkränzer +Reviewed-by: Matthias Brugger +Reviewed-by: Alexandre Mergnat +Reviewed-by: AngeloGioacchino Del Regno +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20231017190545.157282-4-bero@baylibre.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 95 +++++++++++++++++++++++++ + 1 file changed, 95 insertions(+) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -92,6 +92,7 @@ + #define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) + + #define LVTS_HW_SHUTDOWN_MT7988 105000 ++#define LVTS_HW_SHUTDOWN_MT8192 105000 + #define LVTS_HW_SHUTDOWN_MT8195 105000 + + #define LVTS_MINIMUM_THRESHOLD 20000 +@@ -1329,6 +1330,88 @@ static int lvts_resume(struct device *de + return 0; + } + ++static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = { ++ { ++ .cal_offset = { 0x04, 0x08 }, ++ .lvts_sensor = { ++ { .dt_id = MT8192_MCU_BIG_CPU0 }, ++ { .dt_id = MT8192_MCU_BIG_CPU1 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x0, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, ++ .mode = LVTS_MSR_FILTERED_MODE, ++ }, ++ { ++ .cal_offset = { 0x0c, 0x10 }, ++ .lvts_sensor = { ++ { .dt_id = MT8192_MCU_BIG_CPU2 }, ++ { .dt_id = MT8192_MCU_BIG_CPU3 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x100, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, ++ .mode = LVTS_MSR_FILTERED_MODE, ++ }, ++ { ++ .cal_offset = { 0x14, 0x18, 0x1c, 0x20 }, ++ .lvts_sensor = { ++ { .dt_id = MT8192_MCU_LITTLE_CPU0 }, ++ { .dt_id = MT8192_MCU_LITTLE_CPU1 }, ++ { .dt_id = MT8192_MCU_LITTLE_CPU2 }, ++ { .dt_id = MT8192_MCU_LITTLE_CPU3 } ++ }, ++ .num_lvts_sensor = 4, ++ .offset = 0x200, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, ++ .mode = LVTS_MSR_FILTERED_MODE, ++ } ++}; ++ ++static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = { ++ { ++ .cal_offset = { 0x24, 0x28 }, ++ .lvts_sensor = { ++ { .dt_id = MT8192_AP_VPU0 }, ++ { .dt_id = MT8192_AP_VPU1 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x0, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, ++ }, ++ { ++ .cal_offset = { 0x2c, 0x30 }, ++ .lvts_sensor = { ++ { .dt_id = MT8192_AP_GPU0 }, ++ { .dt_id = MT8192_AP_GPU1 } ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x100, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, ++ }, ++ { ++ .cal_offset = { 0x34, 0x38 }, ++ .lvts_sensor = { ++ { .dt_id = MT8192_AP_INFRA }, ++ { .dt_id = MT8192_AP_CAM }, ++ }, ++ .num_lvts_sensor = 2, ++ .offset = 0x200, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, ++ }, ++ { ++ .cal_offset = { 0x3c, 0x40, 0x44 }, ++ .lvts_sensor = { ++ { .dt_id = MT8192_AP_MD0 }, ++ { .dt_id = MT8192_AP_MD1 }, ++ { .dt_id = MT8192_AP_MD2 } ++ }, ++ .num_lvts_sensor = 3, ++ .offset = 0x300, ++ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, ++ } ++}; ++ + static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { + { + .cal_offset = { 0x04, 0x07 }, +@@ -1415,6 +1498,16 @@ static const struct lvts_data mt7988_lvt + .temp_offset = LVTS_COEFF_B_MT7988, + }; + ++static const struct lvts_data mt8192_lvts_mcu_data = { ++ .lvts_ctrl = mt8192_lvts_mcu_data_ctrl, ++ .num_lvts_ctrl = ARRAY_SIZE(mt8192_lvts_mcu_data_ctrl), ++}; ++ ++static const struct lvts_data mt8192_lvts_ap_data = { ++ .lvts_ctrl = mt8192_lvts_ap_data_ctrl, ++ .num_lvts_ctrl = ARRAY_SIZE(mt8192_lvts_ap_data_ctrl), ++}; ++ + static const struct lvts_data mt8195_lvts_mcu_data = { + .lvts_ctrl = mt8195_lvts_mcu_data_ctrl, + .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl), +@@ -1431,6 +1524,8 @@ static const struct lvts_data mt8195_lvt + + static const struct of_device_id lvts_of_match[] = { + { .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data }, ++ { .compatible = "mediatek,mt8192-lvts-mcu", .data = &mt8192_lvts_mcu_data }, ++ { .compatible = "mediatek,mt8192-lvts-ap", .data = &mt8192_lvts_ap_data }, + { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data }, + { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data }, + {}, diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-48-thermal-drivers-mediatek-lvts_thermal-Update-calibra.patch b/target/linux/mediatek/patches-6.1/830-v6.7-48-thermal-drivers-mediatek-lvts_thermal-Update-calibra.patch new file mode 100644 index 0000000000..c20c0b5f2e --- /dev/null +++ b/target/linux/mediatek/patches-6.1/830-v6.7-48-thermal-drivers-mediatek-lvts_thermal-Update-calibra.patch @@ -0,0 +1,70 @@ +From 5d126a3c87cf7964b28bacf3826eea4266265bce Mon Sep 17 00:00:00 2001 +From: Balsam CHIHI +Date: Tue, 17 Oct 2023 21:05:45 +0200 +Subject: [PATCH 42/42] thermal/drivers/mediatek/lvts_thermal: Update + calibration data documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Update LVTS calibration data documentation for mt8192 and mt8195. + +Signed-off-by: Balsam CHIHI +Reviewed-by: Nícolas F. R. A. Prado +[bero@baylibre.com: Fix issues pointed out by Nícolas F. R. A. Prado ] +Signed-off-by: Bernhard Rosenkränzer +Reviewed-by: AngeloGioacchino Del Regno +Reviewed-by: Alexandre Mergnat +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20231017190545.157282-6-bero@baylibre.com +--- + drivers/thermal/mediatek/lvts_thermal.c | 31 +++++++++++++++++++++++-- + 1 file changed, 29 insertions(+), 2 deletions(-) + +--- a/drivers/thermal/mediatek/lvts_thermal.c ++++ b/drivers/thermal/mediatek/lvts_thermal.c +@@ -616,7 +616,34 @@ static int lvts_sensor_init(struct devic + * The efuse blob values follows the sensor enumeration per thermal + * controller. The decoding of the stream is as follow: + * +- * stream index map for MCU Domain : ++ * MT8192 : ++ * Stream index map for MCU Domain mt8192 : ++ * ++ * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1-----> ++ * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 | 0x0A | 0x0B ++ * ++ * <-----sensor#2-----> <-----sensor#3-----> ++ * 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12 | 0x13 ++ * ++ * <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7-----> ++ * 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 | 0x22 | 0x23 ++ * ++ * Stream index map for AP Domain mt8192 : ++ * ++ * <-----sensor#0-----> <-----sensor#1-----> ++ * 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A | 0x2B ++ * ++ * <-----sensor#2-----> <-----sensor#3-----> ++ * 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33 ++ * ++ * <-----sensor#4-----> <-----sensor#5-----> ++ * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B ++ * ++ * <-----sensor#6-----> <-----sensor#7-----> <-----sensor#8-----> ++ * 0x3C | 0x3D | 0x3E | 0x3F | 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 ++ * ++ * MT8195 : ++ * Stream index map for MCU Domain mt8195 : + * + * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1-----> + * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 +@@ -627,7 +654,7 @@ static int lvts_sensor_init(struct devic + * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7-----> + * 0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 + * +- * stream index map for AP Domain : ++ * Stream index map for AP Domain mt8195 : + * + * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1-----> + * 0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A diff --git a/target/linux/mediatek/patches-6.1/831-thermal-drivers-mediatek-Fix-control-buffer-enablement-on-MT7896.patch b/target/linux/mediatek/patches-6.1/831-thermal-drivers-mediatek-Fix-control-buffer-enablement-on-MT7896.patch new file mode 100644 index 0000000000..fc173646e0 --- /dev/null +++ b/target/linux/mediatek/patches-6.1/831-thermal-drivers-mediatek-Fix-control-buffer-enablement-on-MT7896.patch @@ -0,0 +1,59 @@ +From patchwork Thu Sep 7 11:20:18 2023 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Frank Wunderlich +X-Patchwork-Id: 13376356 +From: Frank Wunderlich +To: linux-mediatek@lists.infradead.org +Subject: [PATCH] thermal/drivers/mediatek: Fix control buffer enablement on + MT7896 +Date: Thu, 7 Sep 2023 13:20:18 +0200 +Message-Id: <20230907112018.52811-1-linux@fw-web.de> +X-Mailer: git-send-email 2.34.1 +MIME-Version: 1.0 +X-Mail-ID: e7eeb8e1-00de-41f6-a5df-ce2e9164136e +X-BeenThere: linux-mediatek@lists.infradead.org +X-Mailman-Version: 2.1.34 +Precedence: list +List-Id: +Cc: Daniel Lezcano , + "Rafael J. Wysocki" , linux-pm@vger.kernel.org, + Amit Kucheria , Daniel Golle , + stable@vger.kernel.org, linux-kernel@vger.kernel.org, + Matthias Brugger , Zhang Rui , + linux-arm-kernel@lists.infradead.org, + AngeloGioacchino Del Regno +Sender: "Linux-mediatek" + +From: Frank Wunderlich + +Reading thermal sensor on mt7986 devices returns invalid temperature: + +bpi-r3 ~ # cat /sys/class/thermal/thermal_zone0/temp + -274000 + +Fix this by adding missing members in mtk_thermal_data struct which were +used in mtk_thermal_turn_on_buffer after commit 33140e668b10. + +Cc: stable@vger.kernel.org +Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks") +Signed-off-by: Frank Wunderlich +Reviewed-by: AngeloGioacchino Del Regno +Reviewed-by: Markus Schneider-Pargmann +--- + drivers/thermal/mediatek/auxadc_thermal.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/thermal/mediatek/auxadc_thermal.c ++++ b/drivers/thermal/mediatek/auxadc_thermal.c +@@ -691,6 +691,9 @@ static const struct mtk_thermal_data mt7 + .adcpnp = mt7986_adcpnp, + .sensor_mux_values = mt7986_mux_values, + .version = MTK_THERMAL_V3, ++ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1, ++ .apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3), ++ .apmixed_buffer_ctl_set = BIT(0), + }; + + static bool mtk_thermal_temp_is_valid(int temp)