From: Adrian Schmutzler Date: Wed, 1 Apr 2020 19:54:58 +0000 (+0200) Subject: ipq806x: remove support for kernel 4.14 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c3083b96495685c6c37fa2a5d8ade0dfa845465e;p=openwrt%2Fstaging%2Fdangole.git ipq806x: remove support for kernel 4.14 This target has been on kernel 4.19 for several months [1] and already uses kernel 5.4 as testing kernel. Therefore, it should not be necessary to keep support for kernel 4.14 as well. [1] 2a82e0e1ca0f ("ipq806x: switch to 4.19 kernel version") Signed-off-by: Adrian Schmutzler Acked-by: Stefan Lippers-Hollmann [ipq8065/nbg6817] --- diff --git a/target/linux/ipq806x/config-4.14 b/target/linux/ipq806x/config-4.14 deleted file mode 100644 index 38f5c94507..0000000000 --- a/target/linux/ipq806x/config-4.14 +++ /dev/null @@ -1,489 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_AMBA_PL08X is not set -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -CONFIG_AR8216_PHY=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_MDM9615 is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MSM8960=y -CONFIG_ARCH_MSM8974=y -CONFIG_ARCH_MSM8X60=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_QCOM=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y -CONFIG_ARM_CPUIDLE=y -CONFIG_ARM_CPU_SUSPEND=y -# CONFIG_ARM_CPU_TOPOLOGY is not set -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_QCOM_CPUFREQ=y -CONFIG_ARM_QCOM_CPUIDLE=y -# CONFIG_ARM_SMMU is not set -# CONFIG_ARM_SP805_WATCHDOG is not set -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -# CONFIG_BINFMT_FLAT is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_BOUNCE=y -CONFIG_BUS_TOPOLOGY_ADHOC=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_OF=y -CONFIG_CLKSRC_PROBE=y -CONFIG_CLKSRC_QCOM=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_GPIO=y -# CONFIG_DEBUG_UART_8250 is not set -CONFIG_DEBUG_UNCOMPRESS=y -# CONFIG_DEBUG_USER is not set -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_DT_IDLE_STATES=y -# CONFIG_DWMAC_DWC_QOS_ETH is not set -# CONFIG_DWMAC_GENERIC is not set -CONFIG_DWMAC_IPQ806X=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_SMCCC=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HWMON=y -CONFIG_HWSPINLOCK=y -CONFIG_HWSPINLOCK_QCOM=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MSM=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_QUP=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -# CONFIG_IPQ_GCC_4019 is not set -CONFIG_IPQ_GCC_806X=y -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_IPQ_LCC_806X is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KPSS_XCC=y -CONFIG_KRAITCC=y -CONFIG_KRAIT_CLOCKS=y -CONFIG_KRAIT_L2_ACCESSORS=y -CONFIG_LIBFDT=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MDIO_GPIO=y -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -# CONFIG_MFD_MAX77620 is not set -CONFIG_MFD_QCOM_RPM=y -# CONFIG_MFD_SPMI_PMIC is not set -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MMC=y -CONFIG_MMC_ARMMMCI=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=16 -CONFIG_MMC_QCOM_DML=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_MSM=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MSM_BUS_SCALING=y -CONFIG_MSM_GCC_8660=y -# CONFIG_MSM_GCC_8916 is not set -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_GCC_8994 is not set -# CONFIG_MSM_GCC_8996 is not set -# CONFIG_MSM_IOMMU is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_MMCC_8996 is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_QCOM=y -# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set -CONFIG_MTD_QCOM_SMEM_PARTS=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_HWMON=y -CONFIG_NET_DSA_QCA8K=y -CONFIG_NET_DSA_TAG_QCA=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NO_BOOTMEM=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_QCOM=y -CONFIG_PCI_DEBUG=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_QCOM_APQ8064_SATA is not set -CONFIG_PHY_QCOM_IPQ806X_SATA=y -# CONFIG_PHY_QCOM_QMP is not set -# CONFIG_PHY_QCOM_QUSB2 is not set -# CONFIG_PHY_QCOM_UFS is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -# CONFIG_PINCTRL_IPQ4019 is not set -CONFIG_PINCTRL_IPQ8064=y -# CONFIG_PINCTRL_IPQ8074 is not set -# CONFIG_PINCTRL_MDM9615 is not set -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8916 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_MSM8994 is not set -# CONFIG_PINCTRL_MSM8996 is not set -# CONFIG_PINCTRL_MSM8X74 is not set -# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set -# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set -# CONFIG_PL330_DMA is not set -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_BRCMKONA is not set -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PRINTK_TIME=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_QCOM_ADM=y -CONFIG_QCOM_BAM_DMA=y -CONFIG_QCOM_CLK_RPM=y -# CONFIG_QCOM_EBI2 is not set -CONFIG_QCOM_GDSC=y -CONFIG_QCOM_GSBI=y -CONFIG_QCOM_HFPLL=y -# CONFIG_QCOM_IOMMU is not set -CONFIG_QCOM_PM=y -# CONFIG_QCOM_Q6V5_PIL is not set -CONFIG_QCOM_QFPROM=y -CONFIG_QCOM_RPMCC=y -CONFIG_QCOM_SCM=y -CONFIG_QCOM_SCM_32=y -# CONFIG_QCOM_SMD is not set -CONFIG_QCOM_SMEM=y -# CONFIG_QCOM_SMP2P is not set -# CONFIG_QCOM_SMSM is not set -CONFIG_QCOM_TCSR=y -CONFIG_QCOM_TSENS=y -# CONFIG_QCOM_WCNSS_PIL is not set -CONFIG_QCOM_WDT=y -# CONFIG_QRTR is not set -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_QCOM_RPM=y -# CONFIG_REGULATOR_QCOM_SPMI is not set -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -# CONFIG_RPMSG_QCOM_SMD is not set -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -# CONFIG_SPI_CADENCE_QUADSPI is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_QUP=y -CONFIG_SPMI=y -CONFIG_SPMI_MSM_PMIC_ARB=y -CONFIG_SRCU=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TREE_RCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB=y -CONFIG_USB_COMMON=y -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_QCOM_8X16_PHY is not set -CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -CONFIG_USE_OF=y -CONFIG_VDSO=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts deleted file mode 100644 index 655f9fba37..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ /dev/null @@ -1,248 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm IPQ8064/AP148"; - compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; - }; - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - pullups { - pins = "gpio39"; - bias-pull-up; - }; - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - gsbi5: gsbi@1a200000 { - qcom,mode = ; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: m25p80@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "qcom,smem"; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - }; - - usb30@1 { - status = "ok"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - force_gen1 = <1>; - }; - - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "qcom,smem"; - }; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts deleted file mode 100644 index 7e589be2c3..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts +++ /dev/null @@ -1,277 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm IPQ8064/AP161"; - compatible = "qcom,ipq8064-ap161", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - }; - - chosen { - linux,stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; - }; - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - pullups { - pins = "gpio39"; - bias-pull-up; - }; - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio2", "gpio27", "gpio28", - "gpio29", "gpio30", "gpio31", - "gpio32", "gpio51", "gpio52", - "gpio59", "gpio60", "gpio61", - "gpio62" , "gpio66"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - gsbi5: gsbi@1a200000 { - qcom,mode = ; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: m25p80@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "qcom,smem"; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - }; - - usb30@1 { - status = "ok"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - force_gen1 = <1>; - }; - - pcie2: pci@1b900000 { - status = "ok"; - }; - - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "qcom,smem"; - }; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x20080 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - qca,phy-rgmii-en; - qca,txclk-delay-en; - qca,rxclk-delay-en; - }; - - phy3: ethernet-phy@3 { - device_type = "ethernet-phy"; - reg = <3>; - }; - }; - - gmac0: ethernet@37000000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts deleted file mode 100644 index c4fb2524c8..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +++ /dev/null @@ -1,494 +0,0 @@ -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "TP-Link Archer C2600"; - compatible = "tplink,c2600", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &general; - led-running = &power; - led-upgrade = &general; - label-mac-device = &gmac2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - button_pins: button_pins { - mux { - pins = "gpio16", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", - "gpio53", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - - usb0_pwr_en_pin: usb0_pwr_en_pin { - mux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - output-high; - }; - }; - - usb1_pwr_en_pin: usb1_pwr_en_pin { - mux { - pins = "gpio23"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - output-high; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - gsbi5: gsbi@1a200000 { - qcom,mode = ; - status = "ok"; - - spi5: spi@1a280000 { - status = "ok"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash: m25p80@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - MIBIB@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - SBL2@40000 { - label = "SBL2"; - reg = <0x40000 0x20000>; - read-only; - }; - - SBL3@60000 { - label = "SBL3"; - reg = <0x60000 0x30000>; - read-only; - }; - - DDRCONFIG@90000 { - label = "DDRCONFIG"; - reg = <0x90000 0x10000>; - read-only; - }; - - SSD@a0000 { - label = "SSD"; - reg = <0xa0000 0x10000>; - read-only; - }; - - TZ@b0000 { - label = "TZ"; - reg = <0xb0000 0x30000>; - read-only; - }; - - RPM@e0000 { - label = "RPM"; - reg = <0xe0000 0x20000>; - read-only; - }; - - fs-uboot@100000 { - label = "fs-uboot"; - reg = <0x100000 0x70000>; - read-only; - }; - - uboot-env@170000 { - label = "uboot-env"; - reg = <0x170000 0x40000>; - read-only; - }; - - radio@1b0000 { - label = "radio"; - reg = <0x1b0000 0x40000>; - read-only; - }; - - os-image@1f0000 { - label = "os-image"; - reg = <0x1f0000 0x400000>; - }; - - rootfs@5f0000 { - label = "rootfs"; - reg = <0x5f0000 0x1900000>; - }; - - defaultmac: default-mac@1ef0000 { - label = "default-mac"; - reg = <0x1ef0000 0x00200>; - read-only; - }; - - pin@1ef0200 { - label = "pin"; - reg = <0x1ef0200 0x00200>; - read-only; - }; - - product-info@1ef0400 { - label = "product-info"; - reg = <0x1ef0400 0x0fc00>; - read-only; - }; - - partition-table@1f00000 { - label = "partition-table"; - reg = <0x1f00000 0x10000>; - read-only; - }; - - soft-version@1f10000 { - label = "soft-version"; - reg = <0x1f10000 0x10000>; - read-only; - }; - - support-list@1f20000 { - label = "support-list"; - reg = <0x1f20000 0x10000>; - read-only; - }; - - profile@1f30000 { - label = "profile"; - reg = <0x1f30000 0x10000>; - read-only; - }; - - default-config@1f40000 { - label = "default-config"; - reg = <0x1f40000 0x10000>; - read-only; - }; - - user-config@1f50000 { - label = "user-config"; - reg = <0x1f50000 0x40000>; - read-only; - }; - - qos-db@1f90000 { - label = "qos-db"; - reg = <0x1f90000 0x40000>; - read-only; - }; - - usb-config@1fd0000 { - label = "usb-config"; - reg = <0x1fd0000 0x10000>; - read-only; - }; - - log@1fe0000 { - label = "log"; - reg = <0x1fe0000 0x20000>; - read-only; - }; - }; - }; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - - pinctrl-0 = <&usb0_pwr_en_pin>; - pinctrl-names = "default"; - }; - - usb30@1 { - status = "ok"; - - pinctrl-0 = <&usb1_pwr_en_pin>; - pinctrl-names = "default"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - force_gen1 = <1>; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&defaultmac 0x8>; - mtd-mac-address-increment = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&defaultmac 0x8>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ledswitch { - label = "ledswitch"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - lan { - label = "c2600:white:lan"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; - }; - - usb4 { - label = "c2600:white:usb_4"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "c2600:white:usb_2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "c2600:white:wps"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - label = "c2600:amber:wan"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - wan_white { - label = "c2600:white:wan"; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; - }; - - power: power { - label = "c2600:white:power"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - general: general { - label = "c2600:white:general"; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts deleted file mode 100644 index 1760b1968f..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ /dev/null @@ -1,408 +0,0 @@ -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "Netgear Nighthawk X4 D7800"; - compatible = "netgear,d7800", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0xe000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - pullups { - pins = "gpio39"; - bias-pull-up; - }; - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - ports-implemented = <0x1>; - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; - }; - - usb30@1 { - status = "ok"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - force_gen1 = <1>; - }; - - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <1>; - - cs0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art: art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - }; - - artbak: art@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - kernel@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - - ubi@1880000 { - label = "ubi"; - reg = <0x1880000 0x1C00000>; - }; - - netgear@3480000 { - label = "netgear"; - reg = <0x3480000 0x4480000>; - read-only; - }; - - reserve@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; - }; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - phy-handle = <&phy4>; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&art 6>; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&art 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "d7800:white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "d7800:white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - power_amber: power_amber { - label = "d7800:amber:power"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - label = "d7800:white:wan"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - label = "d7800:amber:wan"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "d7800:white:wps"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "d7800:white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power_white: power_white { - label = "d7800:white:power"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "d7800:white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts deleted file mode 100644 index f4cface193..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ /dev/null @@ -1,232 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm IPQ8064/DB149"; - compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - alias { - serial0 = &uart2; - mdio-gpio0 = &mdio0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii0_pins: rgmii0_pins { - mux { - pins = "gpio2", "gpio66"; - drive-strength = <8>; - bias-disable; - }; - }; - }; - - gsbi2: gsbi@12480000 { - qcom,mode = ; - status = "ok"; - uart2: serial@12490000 { - status = "ok"; - }; - }; - - gsbi5: gsbi@1a200000 { - qcom,mode = ; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: m25p80@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - m25p,fast-read; - - partition@0 { - label = "lowlevel_init"; - reg = <0x0 0x1b0000>; - }; - - partition@1 { - label = "u-boot"; - reg = <0x1b0000 0x80000>; - }; - - partition@2 { - label = "u-boot-env"; - reg = <0x230000 0x40000>; - }; - - partition@3 { - label = "caldata"; - reg = <0x270000 0x40000>; - }; - - partition@4 { - label = "firmware"; - reg = <0x2b0000 0x1d50000>; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - }; - - usb30@1 { - status = "ok"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - }; - - pcie2: pci@1b900000 { - status = "ok"; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - - phy6: ethernet-phy@6 { - reg = <6>; - }; - - phy7: ethernet-phy@7 { - reg = <7>; - }; - }; - - gmac0: ethernet@37000000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <0>; - phy-handle = <&phy4>; - - pinctrl-0 = <&rgmii0_pins>; - pinctrl-names = "default"; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - phy-handle = <&phy6>; - }; - - gmac3: ethernet@37600000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <3>; - phy-handle = <&phy7>; - }; - }; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts deleted file mode 100644 index ca8376afd7..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ /dev/null @@ -1,400 +0,0 @@ -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "Linksys EA8500 WiFi Router"; - compatible = "linksys,ea8500", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "console=ttyMSM0,115200n8"; - stdout-path = "serial0:115200n8"; - append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */ - }; - - soc { - pinmux@800000 { - button_pins: button_pins { - mux { - pins = "gpio65", "gpio67", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio53", "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - pullups { - pins = "gpio39"; - bias-pull-up; - }; - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - }; - - usb30@1 { - status = "ok"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - force_gen1 = <1>; - }; - - pcie1: pci@1b700000 { - status = "ok"; - }; - - pcie2: pci@1b900000 { - status = "ok"; - }; - - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - MIBIB@40000 { - label = "MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - SBL2@180000 { - label = "SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - SBL3@2c0000 { - label = "SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - DDRCONFIG@540000 { - label = "DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - SSD@660000 { - label = "SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - TZ@780000 { - label = "TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - RPM@a00000 { - label = "RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - art: art@c80000 { - label = "art"; - reg = <0x0c80000 0x0140000>; - read-only; - }; - - APPSBL@dc0000 { - label = "APPSBL"; - reg = <0x0dc0000 0x0100000>; - read-only; - }; - - u_env@ec0000 { - label = "u_env"; - reg = <0x0ec0000 0x0040000>; - }; - - s_env@f00000 { - label = "s_env"; - reg = <0x0f00000 0x0040000>; - }; - - devinfo@f40000 { - label = "devinfo"; - reg = <0x0f40000 0x0040000>; - }; - - linux@f80000 { - label = "kernel1"; - reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/ - }; - - rootfs@1280000 { - label = "rootfs1"; - reg = <0x1280000 0x2500000>; - }; - - linux2@3780000 { - label = "kernel2"; - reg = <0x3780000 0x2800000>; - }; - - rootfs2@3a80000 { - label = "rootfs2"; - reg = <0x3a80000 0x2500000>; - }; - - syscfg@5f80000 { - label = "syscfg"; - reg = <0x5f80000 0x2080000>; - }; - }; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,rgmii_delay = <0>; - qcom,emulation = <0>; - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - //lan - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,emulation = <0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - adm_dma: dma@18300000 { - status = "ok"; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - wps { - label = "ea8500:green:wps"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "ea8500:white:power"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wifi { - label = "ea8500:green:wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; - }; - }; -}; - diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts deleted file mode 100644 index b6505dd541..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts +++ /dev/null @@ -1,382 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -#include -#include - -/ { - model = "Netgear Nighthawk X4 R7500"; - compatible = "netgear,r7500", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0xe000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - pullups { - pins = "gpio39"; - bias-pull-up; - }; - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - clocks = <&gcc USB30_0_UTMI_CLK>; - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - clocks = <&gcc USB30_0_MASTER_CLK>; - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - clocks = <&gcc USB30_1_UTMI_CLK>; - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - clocks = <&gcc USB30_1_MASTER_CLK>; - status = "ok"; - }; - - usb30@0 { - clocks = <&gcc USB30_1_MASTER_CLK>; - status = "ok"; - }; - - usb30@1 { - clocks = <&gcc USB30_0_MASTER_CLK>; - status = "ok"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - force_gen1 = <1>; - }; - - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art: art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - }; - - kernel@1340000 { - label = "kernel"; - reg = <0x1340000 0x0400000>; - }; - - ubi@1740000 { - label = "ubi"; - reg = <0x1740000 0x1600000>; - }; - - netgear@2d40000 { - label = "netgear"; - reg = <0x2d40000 0x0c00000>; - read-only; - }; - - reserve@3940000 { - label = "reserve"; - reg = <0x3940000 0x46c0000>; - read-only; - }; - }; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&art 6>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&art 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "r7500:white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "r7500:white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - power_amber: power_amber { - label = "r7500:amber:power"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - label = "r7500:white:wan"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - label = "r7500:amber:wan"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "r7500:white:wps"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "r7500:white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power_white: power_white { - label = "r7500:white:power"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "r7500:white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tcsr { - qcom,usb-ctrl-select = ; - compatible = "qcom,tcsr"; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts deleted file mode 100644 index faec8b35ae..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts +++ /dev/null @@ -1,407 +0,0 @@ -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "Netgear Nighthawk X4 R7500v2"; - compatible = "netgear,r7500v2", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - - rsvd@5fe00000 { - reg = <0x5fe00000 0x200000>; - reusable; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - pullups { - pins = "gpio39"; - bias-pull-up; - }; - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; - }; - - usb30@1 { - status = "ok"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - force_gen1 = <1>; - }; - - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art: art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - }; - - artbak: art@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - kernel@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - - ubi@1880000 { - label = "ubi"; - reg = <0x1880000 0x6080000>; - }; - - reserve@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; - }; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&art 6>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&art 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "r7500v2:amber:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb3 { - label = "r7500v2:amber:usb3"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - status { - label = "r7500v2:amber:status"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - internet { - label = "r7500v2:white:internet"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "r7500v2:white:wan"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "r7500v2:white:wps"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "r7500v2:white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "r7500v2:white:power"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "r7500v2:white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi deleted file mode 100644 index 8c522a897d..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - soc: soc { - - ss_phy_0: phy@110f8830 { - rx_eq = <2>; - tx_deamp_3_5db = <32>; - mpll = <0xa0>; - }; - - ss_phy_1: phy@100f8830 { - rx_eq = <2>; - tx_deamp_3_5db = <32>; - mpll = <0xa0>; - }; - - pcie0: pci@1b500000 { - phy-tx0-term-offset = <0>; - }; - - pcie1: pci@1b700000 { - phy-tx0-term-offset = <0>; - }; - - pcie2: pci@1b900000 { - phy-tx0-term-offset = <0>; - }; - }; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts deleted file mode 100644 index 2c224016b6..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts +++ /dev/null @@ -1,417 +0,0 @@ -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "TP-Link Archer VR2600v"; - compatible = "tplink,vr2600v", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &general; - led-running = &power; - led-upgrade = &general; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", - "gpio26", "gpio53", "gpio56", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - gsbi5: gsbi@1a200000 { - qcom,mode = ; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash: W25Q128@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - MIBIB@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - SBL2@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - SBL3@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - DDRCONFIG@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - SSD@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - TZ@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - RPM@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - APPSBL@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - }; - - APPSBLENV@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x40000>; - read-only; - }; - - OLDART@2e0000 { - label = "OLDART"; - reg = <0x2e0000 0x40000>; - read-only; - }; - - kernel@320000 { - label = "kernel"; - reg = <0x320000 0x300000>; - }; - - rootfs@620000 { - label = "rootfs"; - reg = <0x620000 0x960000>; - }; - - defaultmac: default-mac@0xfaf100 { - label = "default-mac"; - reg = <0xfaf100 0x00200>; - read-only; - }; - - ART@fc0000 { - label = "ART"; - reg = <0xfc0000 0x40000>; - read-only; - }; - }; - }; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - }; - - usb30@1 { - status = "ok"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - force_gen1 = <1>; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&defaultmac 0>; - mtd-mac-address-increment = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&defaultmac 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - dect { - label = "dect"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ledswitch { - label = "ledswitch"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - dsl { - label = "vr2600v:white:dsl"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb { - label = "vr2600v:white:usb"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - lan { - label = "vr2600v:white:lan"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "vr2600v:white:wlan2g"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "vr2600v:white:wlan5g"; - gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "vr2600v:white:power"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - phone { - label = "vr2600v:white:phone"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "vr2600v:white:wan"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - general: general { - label = "vr2600v:white:general"; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts deleted file mode 100644 index e2a481723b..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts +++ /dev/null @@ -1,442 +0,0 @@ -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "NEC Aterm WG2600HP"; - compatible = "nec,wg2600hp", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x06000000 /* PAD0_MODE */ - 0x0000c 0x00080080 /* PAD6_MODE */ - 0x000e4 0x0006a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x0000004e /* PORT0_STATUS */ - 0x00094 0x0000004e /* PORT6_STATUS */ - >; - }; - - ethernet-phy@4 { - reg = <4>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - bridge { - label = "bridge"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - converter { - label = "converter"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - converter_green { - label = "wg2600hp:green:converter"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; - }; - - power_red: power_red { - label = "wg2600hp:red:power"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - active_green { - label = "wg2600hp:green:active"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - active_red { - label = "wg2600hp:red:active"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - power_green: power_green { - label = "wg2600hp:green:power"; - gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; - }; - - converter_red { - label = "wg2600hp:red:converter"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "wg2600hp:green:wlan2g"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_red { - label = "wg2600hp:red:wlan2g"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "wg2600hp:green:wlan5g"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_red { - label = "wg2600hp:red:wlan5g"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>; - }; - - tv_green { - label = "wg2600hp:green:tv"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - tv_red { - label = "wg2600hp:red:tv"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&PRODUCTDATA 6>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&PRODUCTDATA 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi4_serial { - status = "okay"; -}; - -&gsbi5 { - status = "okay"; - - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - MIBIB@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - SBL2@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - SBL3@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - DDRCONFIG@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - SSD@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - TZ@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - RPM@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - APPSBL@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - }; - - APPSBLENV@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x10000>; - }; - - PRODUCTDATA: PRODUCTDATA@2b0000 { - label = "PRODUCTDATA"; - reg = <0x2b0000 0x30000>; - read-only; - }; - - ART@2e0000 { - label = "ART"; - reg = <0x2e0000 0x40000>; - read-only; - }; - - TP@320000 { - label = "TP"; - reg = <0x320000 0x40000>; - read-only; - }; - - TINY@360000 { - label = "TINY"; - reg = <0x360000 0x500000>; - read-only; - }; - - firmware@860000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x860000 0x17a0000>; - }; - }; - }; - }; -}; - -&hs_phy_0 { /* USB3 port 0 HS phy */ - status = "okay"; -}; - -&ss_phy_0 { /* USB3 port 0 SS phy */ - status = "okay"; -}; - -&hs_phy_1 { /* USB3 port 1 HS phy */ - status = "okay"; -}; - -&ss_phy_1 { /* USB3 port 1 SS phy */ - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - force_gen1 = <1>; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio16", "gpio54", "gpio24", "gpio25"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14", - "gpio15", "gpio55", "gpio56", "gpio57", "gpio58", - "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux { - pins = "gpio22"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-high; - }; - }; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts deleted file mode 100644 index 14258d594e..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts +++ /dev/null @@ -1,568 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright (C) 2017 Christian Mehlis - * Copyright (C) 2018 Mathias Kresin - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of any - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "qcom-ipq8064-v1.0.dtsi" - -#include -#include - -/ { - compatible = "compex,wpq864", "qcom,ipq8064"; - model = "Compex WPQ864"; - - aliases { - mdio-gpio0 = &mdio0; - serial0 = &gsbi4_serial; - ethernet0 = &gmac1; - ethernet1 = &gmac0; - - led-boot = &led_pass; - led-failsafe = &led_fail; - led-running = &led_pass; - led-upgrade = &led_pass; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - rpm@108000 { - pinctrl-0 = <&rpm_pins>; - pinctrl-names = "default"; - }; - - nand@1ac00000 { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - mt29f2g08abbeah4@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - MIBIB@40000 { - label = "MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - SBL2@180000 { - label = "SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - SBL3@2c0000 { - label = "SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - DDRCONFIG@540000 { - label = "DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - SSD@660000 { - label = "SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - TZ@780000 { - label = "TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - RPM@a00000 { - label = "RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - - ART@1200000 { - label = "ART"; - reg = <0x1200000 0x0140000>; - }; - - ubi@1340000 { - label = "ubi"; - reg = <0x1340000 0x4000000>; - }; - - BOOTCONFIG@5340000 { - label = "BOOTCONFIG"; - reg = <0x5340000 0x0060000>; - }; - - SBL2-1@53a0000- { - label = "SBL2_1"; - reg = <0x53a0000 0x0140000>; - read-only; - }; - - SBL3-1@54e0000 { - label = "SBL3_1"; - reg = <0x54e0000 0x0280000>; - read-only; - }; - - DDRCONFIG-1@5760000 { - label = "DDRCONFIG_1"; - reg = <0x5760000 0x0120000>; - read-only; - }; - - SSD-1@5880000 { - label = "SSD_1"; - reg = <0x5880000 0x0120000>; - read-only; - }; - - TZ-1@59a0000 { - label = "TZ_1"; - reg = <0x59a0000 0x0280000>; - read-only; - }; - - RPM-1@5c20000 { - label = "RPM_1"; - reg = <0x5c20000 0x0280000>; - read-only; - }; - - BOOTCONFIG1@5ea0000 { - label = "BOOTCONFIG1"; - reg = <0x5ea0000 0x0060000>; - }; - - APPSBL-1@5f00000 { - label = "APPSBL_1"; - reg = <0x5f00000 0x0500000>; - read-only; - }; - - ubi-1@6400000 { - label = "ubi_1"; - reg = <0x6400000 0x4000000>; - }; - - unused@a400000 { - label = "unused"; - reg = <0xa400000 0x5c00000>; - }; - }; - }; - }; - }; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "virtual,mdio-gpio"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - ethernet-phy@4 { - reg = <4>; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - rss4 { - label = "wpq864:green:rss4"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - rss3 { - label = "wpq864:green:rss3"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - rss2 { - label = "wpq864:orange:rss2"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - - rss1 { - label = "wpq864:red:rss1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - led_pass: pass { - label = "wpq864:green:pass"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - led_fail: fail { - label = "wpq864:green:fail"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - usb { - label = "wpq864:green:usb"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb-pcie { - label = "wpq864:green:usb-pcie"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - beeper { - compatible = "gpio-beeper"; - - pinctrl-0 = <&beeper_pins>; - pinctrl-names = "default"; - - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi4_serial { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&gsbi5 { - status = "okay"; - - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - s25fl256s1@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <50000000>; - }; - }; -}; - -&hs_phy_0 { /* USB3 port 0 HS phy */ - status = "okay"; -}; - -&hs_phy_1 { /* USB3 port 1 HS phy */ - status = "okay"; -}; - -&ss_phy_0 { /* USB3 port 0 SS phy */ - status = "okay"; - - rx_eq = <2>; - tx_deamp_3_5db = <32>; - mpll = <160>; -}; - -&ss_phy_1 { /* USB3 port 1 SS phy */ - status = "okay"; - - rx_eq = <2>; - tx_deamp_3_5db = <32>; - mpll = <160>; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; -}; - -&qcom_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinctrl0 { - pcie0_pcie2_perst { - pins = "gpio3"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", - "gpio23", "gpio24", "gpio25", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - beeper_pins: beeper_pins { - mux { - pins = "gpio55"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - rpm_pins: rpm_pins { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", "gpio37", - "gpio38", "gpio39", "gpio40", "gpio41", - "gpio42", "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - - pullups { - pins = "gpio39"; - bias-pull-up; - }; - - hold { - pins = "gpio40", "gpio41", "gpio42", "gpio43", - "gpio44", "gpio45", "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", - "gpio31", "gpio32", "gpio51", "gpio52", - "gpio59", "gpio60", "gpio61", "gpio62"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; -}; - -&usb3_0 { - status = "okay"; -}; - - -&usb3_1 { - status = "okay"; -}; - -&tcsr { - qcom,usb-ctrl-select = ; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts deleted file mode 100644 index 7b5ee799ee..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts +++ /dev/null @@ -1,535 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "Buffalo WXR-2533DHP"; - compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064"; - - memory@42000000 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - - led-boot = &power; - led-failsafe = &diag; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - /* use "ubi_rootfs" volume in "ubi" partition as rootfs */ - bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs"; - stdout-path = "serial0:115200n8"; - }; - - soc { - nand@1ac00000 { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ubi@0 { - label = "ubi"; - reg = <0x0000000 0x4000000>; - }; - - rootfs_1@4000000 { - label = "rootfs_1"; - reg = <0x4000000 0x4000000>; - }; - }; - }; - }; - - mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, - <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x07600000 /* PAD0_MODE */ - 0x00008 0x01000000 /* PAD5_MODE */ - 0x0000c 0x00000080 /* PAD6_MODE */ - 0x00050 0xcc35cc35 /* LED_CTRL0 */ - 0x00054 0xca35ca35 /* LED_CTRL1 */ - 0x00058 0xc935c935 /* LED_CTRL2 */ - 0x0005c 0x03ffff00 /* LED_CTRL3 */ - 0x000e4 0x0006a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x0000007e /* PORT0_STATUS */ - 0x00094 0x0000007e /* PORT6_STATUS */ - >; - }; - - ethernet-phy@4 { - reg = <4>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb { - label = "wxr-2533dhp:green:usb"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port0 &hub_port1>; - }; - - guestport { - label = "wxr-2533dhp:green:guestport"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - diag: diag { - label = "wxr-2533dhp:orange:diag"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - internet_orange { - label = "wxr-2533dhp:orange:internet"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - internet_white { - label = "wxr-2533dhp:white:internet"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wireless_orange { - label = "wxr-2533dhp:orange:wireless"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wireless_white { - label = "wxr-2533dhp:white:wireless"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - router_orange { - label = "wxr-2533dhp:orange:router"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - - router_white { - label = "wxr-2533dhp:white:router"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - power: power { - label = "wxr-2533dhp:white:power"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - power { - label = "power"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - eject { - label = "eject"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - guest { - label = "guest"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ap { - label = "ap"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - router { - label = "router"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - auto { - label = "auto"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&ART 6>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "ok"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&ART 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi4_serial { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x10000>; - read-only; - }; - - MIBIB@10000 { - label = "MIBIB"; - reg = <0x10000 0x20000>; - read-only; - }; - - SBL2@30000 { - label = "SBL2"; - reg = <0x30000 0x30000>; - read-only; - }; - - SBL3@60000 { - label = "SBL3"; - reg = <0x60000 0x30000>; - read-only; - }; - - DDRCONFIG@90000 { - label = "DDRCONFIG"; - reg = <0x90000 0x10000>; - read-only; - }; - - SSD@a0000 { - label = "SSD"; - reg = <0xa0000 0x10000>; - read-only; - }; - - TZ@b0000 { - label = "TZ"; - reg = <0xb0000 0x30000>; - read-only; - }; - - RPM@e0000 { - label = "RPM"; - reg = <0xe0000 0x20000>; - read-only; - }; - - APPSBL@100000 { - label = "APPSBL"; - reg = <0x100000 0x70000>; - read-only; - }; - - APPSBLENV@170000 { - label = "APPSBLENV"; - reg = <0x170000 0x10000>; - read-only; - }; - - ART: ART@180000 { - label = "ART"; - reg = <0x180000 0x40000>; - read-only; - }; - - BOOTCONFIG@1c0000 { - label = "BOOTCONFIG"; - reg = <0x1c0000 0x10000>; - read-only; - }; - - APPSBL_1@1d0000 { - label = "APPSBL_1"; - reg = <0x1d0000 0x70000>; - read-only; - }; - }; - }; - }; -}; - -&hs_phy_0 { /* USB3 port 0 HS phy */ - status = "okay"; -}; - -&ss_phy_0 { /* USB3 port 0 SS phy */ - status = "okay"; -}; - -&hs_phy_1 { /* USB3 port 1 HS phy */ - status = "okay"; -}; - -&ss_phy_1 { /* USB3 port 1 SS phy */ - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&usb3_1 { - status = "okay"; -}; - -&dwc3_0 { - #address-cells = <1>; - #size-cells = <0>; - - hub_port0: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&dwc3_1 { - #address-cells = <1>; - #size-cells = <0>; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - force_gen1 = <1>; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57", - "gpio58", "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22", - "gpio23", "gpio24", "gpio25", "gpio26", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs{ - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - - pullups { - pins = "gpio39"; - bias-pull-up; - }; - - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux{ - pins = "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - output-high; - }; - }; -}; \ No newline at end of file diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi deleted file mode 100644 index 8387460d27..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ /dev/null @@ -1,1410 +0,0 @@ -/dts-v1/; - -#include "skeleton.dtsi" -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - model = "Qualcomm IPQ8064"; - compatible = "qcom,ipq8064"; - interrupt-parent = <&intc>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2>; - qcom,acc = <&acc0>; - qcom,saw = <&saw0>; - clocks = <&kraitcc 0>, <&kraitcc 4>; - clock-names = "cpu", "l2"; - clock-latency = <100000>; - cpu-supply = <&smb208_s2a>; - voltage-tolerance = <5>; - cooling-min-state = <0>; - cooling-max-state = <10>; - #cooling-cells = <2>; - cpu-idle-states = <&CPU_SPC>; - }; - - cpu1: cpu@1 { - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2>; - qcom,acc = <&acc1>; - qcom,saw = <&saw1>; - clocks = <&kraitcc 1>, <&kraitcc 4>; - clock-names = "cpu", "l2"; - clock-latency = <100000>; - cpu-supply = <&smb208_s2b>; - cooling-min-state = <0>; - cooling-max-state = <10>; - #cooling-cells = <2>; - cpu-idle-states = <&CPU_SPC>; - }; - - L2: l2-cache { - compatible = "cache"; - cache-level = <2>; - qcom,saw = <&saw_l2>; - }; - - qcom,l2 { - qcom,l2-rates = <384000000 1000000000 1200000000>; - }; - - idle-states { - CPU_SPC: spc { - compatible = "qcom,idle-state-spc", - "arm,idle-state"; - entry-latency-us = <400>; - exit-latency-us = <900>; - min-residency-us = <3000>; - }; - }; - }; - - thermal-zones { - tsens_tz_sensor0 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 0>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor1 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 1>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor2 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 2>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor3 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 3>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor4 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 4>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor5 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 5>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor6 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 6>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor7 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 7>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor8 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 8>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor9 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 9>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - - tsens_tz_sensor10 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens 10>; - - trips { - cpu-critical-hi { - temperature = <125000>; - hysteresis = <2000>; - type = "critical_high"; - }; - - cpu-config-hi { - temperature = <105000>; - hysteresis = <2000>; - type = "configurable_hi"; - }; - - cpu-config-lo { - temperature = <95000>; - hysteresis = <2000>; - type = "configurable_lo"; - }; - - cpu-critical-low { - temperature = <0>; - hysteresis = <2000>; - type = "critical_low"; - }; - }; - }; - }; - - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = <1 10 0x304>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - nss@40000000 { - reg = <0x40000000 0x1000000>; - no-map; - }; - - smem: smem@41000000 { - reg = <0x41000000 0x200000>; - no-map; - }; - }; - - clocks { - cxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - pxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - clock-frequency = <32768>; - #clock-cells = <0>; - }; - }; - - firmware { - scm { - compatible = "qcom,scm-ipq806x"; - }; - }; - - kraitcc: clock-controller { - compatible = "qcom,krait-cc-v1"; - #clock-cells = <1>; - }; - - qcom,pvs { - qcom,pvs-format-a; - qcom,speed0-pvs0-bin-v0 = - < 1400000000 1250000 >, - < 1200000000 1200000 >, - < 1000000000 1150000 >, - < 800000000 1100000 >, - < 600000000 1050000 >, - < 384000000 1000000 >; - - qcom,speed0-pvs1-bin-v0 = - < 1400000000 1175000 >, - < 1200000000 1125000 >, - < 1000000000 1075000 >, - < 800000000 1025000 >, - < 600000000 975000 >, - < 384000000 925000 >; - - qcom,speed0-pvs2-bin-v0 = - < 1400000000 1125000 >, - < 1200000000 1075000 >, - < 1000000000 1025000 >, - < 800000000 995000 >, - < 600000000 925000 >, - < 384000000 875000 >; - - qcom,speed0-pvs3-bin-v0 = - < 1400000000 1050000 >, - < 1200000000 1000000 >, - < 1000000000 950000 >, - < 800000000 900000 >, - < 600000000 850000 >, - < 384000000 800000 >; - }; - - soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "simple-bus"; - - lpass@28100000 { - compatible = "qcom,lpass-cpu"; - status = "disabled"; - clocks = <&lcc AHBIX_CLK>, - <&lcc MI2S_OSR_CLK>, - <&lcc MI2S_BIT_CLK>; - clock-names = "ahbix-clk", - "mi2s-osr-clk", - "mi2s-bit-clk"; - interrupts = <0 85 1>; - interrupt-names = "lpass-irq-lpaif"; - reg = <0x28100000 0x10000>; - reg-names = "lpass-lpaif"; - }; - - qfprom: qfprom@700000 { - compatible = "qcom,qfprom", "syscon"; - reg = <0x700000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - tsens_calib: calib@400 { - reg = <0x400 0x10>; - }; - tsens_backup: backup@410 { - reg = <0x410 0x10>; - }; - }; - - rpm@108000 { - compatible = "qcom,rpm-ipq8064"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; - - interrupts = <0 19 0>, - <0 21 0>, - <0 22 0>; - interrupt-names = "ack", - "err", - "wakeup"; - - clocks = <&gcc RPM_MSG_RAM_H_CLK>; - clock-names = "ram"; - - #address-cells = <1>; - #size-cells = <0>; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; - #clock-cells = <1>; - }; - - regulators { - compatible = "qcom,rpm-smb208-regulators"; - - smb208_s1a: s1a { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1150000>; - - qcom,switch-mode-frequency = <1200000>; - - }; - - smb208_s1b: s1b { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1150000>; - - qcom,switch-mode-frequency = <1200000>; - }; - - smb208_s2a: s2a { - regulator-min-microvolt = < 800000>; - regulator-max-microvolt = <1250000>; - - qcom,switch-mode-frequency = <1200000>; - }; - - smb208_s2b: s2b { - regulator-min-microvolt = < 800000>; - regulator-max-microvolt = <1250000>; - - qcom,switch-mode-frequency = <1200000>; - }; - }; - }; - - rng@1a500000 { - compatible = "qcom,prng"; - reg = <0x1a500000 0x200>; - clocks = <&gcc PRNG_CLK>; - clock-names = "core"; - }; - - qcom_pinmux: pinmux@800000 { - compatible = "qcom,ipq8064-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - pcie0_pins: pcie0_pinmux { - mux { - pins = "gpio3"; - function = "pcie1_rst"; - drive-strength = <2>; - bias-disable; - }; - }; - - pcie1_pins: pcie1_pinmux { - mux { - pins = "gpio48"; - function = "pcie2_rst"; - drive-strength = <2>; - bias-disable; - }; - }; - - pcie2_pins: pcie2_pinmux { - mux { - pins = "gpio63"; - function = "pcie3_rst"; - drive-strength = <2>; - bias-disable; - output-low; - }; - }; - }; - - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x02000000 0x1000>, - <0x02002000 0x1000>; - }; - - timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>, - <1 4 0x301>, - <1 5 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <25000000>, - <32768>; - clocks = <&sleep_clk>; - clock-names = "sleep"; - cpu-offset = <0x80000>; - }; - - acc0: clock-controller@2088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02088000 0x1000>, <0x02008000 0x1000>; - clock-output-names = "acpu0_aux"; - }; - - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; - clock-output-names = "acpu1_aux"; - }; - - l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; - clock-output-names = "acpu_l2_aux"; - }; - - saw0: regulator@2089000 { - compatible = "qcom,saw2", "syscon"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; - }; - - saw1: regulator@2099000 { - compatible = "qcom,saw2", "syscon"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; - }; - - saw_l2: regulator@02012000 { - compatible = "qcom,saw2", "syscon"; - reg = <0x02012000 0x1000>; - regulator; - }; - - sic_non_secure: sic-non-secure@12100000 { - compatible = "syscon"; - reg = <0x12100000 0x10000>; - }; - - gsbi2: gsbi@12480000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <2>; - reg = <0x12480000 0x100>; - clocks = <&gcc GSBI2_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - syscon-tcsr = <&tcsr>; - - uart2: serial@12490000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x12490000 0x1000>, - <0x12480000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - i2c@124a0000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x124a0000 0x1000>; - interrupts = <0 196 0>; - - clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - - }; - - gsbi4: gsbi@16300000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <4>; - reg = <0x16300000 0x100>; - clocks = <&gcc GSBI4_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - syscon-tcsr = <&tcsr>; - - gsbi4_serial: serial@16340000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16340000 0x1000>, - <0x16300000 0x1000>; - interrupts = <0 152 0x0>; - clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - i2c@16380000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; - - clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - gsbi5: gsbi@1a200000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <5>; - reg = <0x1a200000 0x100>; - clocks = <&gcc GSBI5_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - syscon-tcsr = <&tcsr>; - - uart5: serial@1a240000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x1a240000 0x1000>, - <0x1a200000 0x1000>; - interrupts = <0 154 0x0>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - i2c@1a280000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; - - clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - - spi@1a280000 { - compatible = "qcom,spi-qup-v1.1.1"; - reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; - - clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - sata_phy: sata-phy@1b400000 { - compatible = "qcom,ipq806x-sata-phy"; - reg = <0x1b400000 0x200>; - - clocks = <&gcc SATA_PHY_CFG_CLK>; - clock-names = "cfg"; - - #phy-cells = <0>; - status = "disabled"; - }; - - sata@29000000 { - compatible = "qcom,ipq806x-ahci", "generic-ahci"; - reg = <0x29000000 0x180>; - - ports-implemented = <0x1>; - - interrupts = <0 209 0x0>; - - clocks = <&gcc SFAB_SATA_S_H_CLK>, - <&gcc SATA_H_CLK>, - <&gcc SATA_A_CLK>, - <&gcc SATA_RXOOB_CLK>, - <&gcc SATA_PMALIVE_CLK>; - clock-names = "slave_face", "iface", "core", - "rxoob", "pmalive"; - - assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; - assigned-clock-rates = <100000000>, <100000000>; - - phys = <&sata_phy>; - phy-names = "sata-phy"; - status = "disabled"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x00500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064"; - reg = <0x00900000 0x4000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - tsens: thermal-sensor@900000 { - compatible = "qcom,ipq8064-tsens"; - reg = <0x900000 0x3680>; - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - interrupts = <0 178 0>; - #thermal-sensor-cells = <1>; - }; - - tcsr: syscon@1a400000 { - compatible = "qcom,tcsr-ipq8064", "syscon"; - reg = <0x1a400000 0x100>; - }; - - lcc: clock-controller@28000000 { - compatible = "qcom,lcc-ipq8064"; - reg = <0x28000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - sfpb_mutex_block: syscon@1200600 { - compatible = "syscon"; - reg = <0x01200600 0x100>; - }; - - hs_phy_1: phy@100f8800 { - compatible = "qcom,dwc3-hs-usb-phy"; - reg = <0x100f8800 0x30>; - clocks = <&gcc USB30_1_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - ss_phy_1: phy@100f8830 { - compatible = "qcom,dwc3-ss-usb-phy"; - reg = <0x100f8830 0x30>; - clocks = <&gcc USB30_1_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - hs_phy_0: phy@110f8800 { - compatible = "qcom,dwc3-hs-usb-phy"; - reg = <0x110f8800 0x30>; - clocks = <&gcc USB30_0_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - ss_phy_0: phy@110f8830 { - compatible = "qcom,dwc3-ss-usb-phy"; - reg = <0x110f8830 0x30>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - usb3_0: usb30@0 { - compatible = "qcom,dwc3"; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "core"; - - ranges; - - resets = <&gcc USB30_0_MASTER_RESET>; - reset-names = "usb30_0_mstr_rst"; - - status = "disabled"; - - dwc3_0: dwc3@11000000 { - compatible = "snps,dwc3"; - reg = <0x11000000 0xcd00>; - interrupts = <0 110 0x4>; - phys = <&hs_phy_0>, <&ss_phy_0>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - snps,dis_u3_susphy_quirk; - }; - }; - - usb3_1: usb30@1 { - compatible = "qcom,dwc3"; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&gcc USB30_1_MASTER_CLK>; - clock-names = "core"; - - ranges; - - resets = <&gcc USB30_1_MASTER_RESET>; - reset-names = "usb30_1_mstr_rst"; - - status = "disabled"; - - dwc3_1: dwc3@10000000 { - compatible = "snps,dwc3"; - reg = <0x10000000 0xcd00>; - interrupts = <0 205 0x4>; - phys = <&hs_phy_1>, <&ss_phy_1>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - snps,dis_u3_susphy_quirk; - }; - }; - - pcie0: pci@1b500000 { - compatible = "qcom,pcie-ipq8064"; - reg = <0x1b500000 0x1000 - 0x1b502000 0x80 - 0x1b600000 0x100 - 0x0ff00000 0x100000>; - reg-names = "dbi", "elbi", "parf", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc PCIE_A_CLK>, - <&gcc PCIE_H_CLK>, - <&gcc PCIE_PHY_CLK>, - <&gcc PCIE_AUX_CLK>, - <&gcc PCIE_ALT_REF_CLK>; - clock-names = "core", "iface", "phy", "aux", "ref"; - - assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; - assigned-clock-rates = <100000000>; - - resets = <&gcc PCIE_ACLK_RESET>, - <&gcc PCIE_HCLK_RESET>, - <&gcc PCIE_POR_RESET>, - <&gcc PCIE_PCI_RESET>, - <&gcc PCIE_PHY_RESET>, - <&gcc PCIE_EXT_RESET>; - reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; - - phy-tx0-term-offset = <7>; - - status = "disabled"; - }; - - pcie1: pci@1b700000 { - compatible = "qcom,pcie-ipq8064"; - reg = <0x1b700000 0x1000 - 0x1b702000 0x80 - 0x1b800000 0x100 - 0x31f00000 0x100000>; - reg-names = "dbi", "elbi", "parf", "config"; - device_type = "pci"; - linux,pci-domain = <1>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ - 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc PCIE_1_A_CLK>, - <&gcc PCIE_1_H_CLK>, - <&gcc PCIE_1_PHY_CLK>, - <&gcc PCIE_1_AUX_CLK>, - <&gcc PCIE_1_ALT_REF_CLK>; - clock-names = "core", "iface", "phy", "aux", "ref"; - - assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; - assigned-clock-rates = <100000000>; - - resets = <&gcc PCIE_1_ACLK_RESET>, - <&gcc PCIE_1_HCLK_RESET>, - <&gcc PCIE_1_POR_RESET>, - <&gcc PCIE_1_PCI_RESET>, - <&gcc PCIE_1_PHY_RESET>, - <&gcc PCIE_1_EXT_RESET>; - reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - - perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; - - phy-tx0-term-offset = <7>; - - status = "disabled"; - }; - - pcie2: pci@1b900000 { - compatible = "qcom,pcie-ipq8064"; - reg = <0x1b900000 0x1000 - 0x1b902000 0x80 - 0x1ba00000 0x100 - 0x35f00000 0x100000>; - reg-names = "dbi", "elbi", "parf", "config"; - device_type = "pci"; - linux,pci-domain = <2>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ - 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc PCIE_2_A_CLK>, - <&gcc PCIE_2_H_CLK>, - <&gcc PCIE_2_PHY_CLK>, - <&gcc PCIE_2_AUX_CLK>, - <&gcc PCIE_2_ALT_REF_CLK>; - clock-names = "core", "iface", "phy", "aux", "ref"; - - assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; - assigned-clock-rates = <100000000>; - - resets = <&gcc PCIE_2_ACLK_RESET>, - <&gcc PCIE_2_HCLK_RESET>, - <&gcc PCIE_2_POR_RESET>, - <&gcc PCIE_2_PCI_RESET>, - <&gcc PCIE_2_PHY_RESET>, - <&gcc PCIE_2_EXT_RESET>; - reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - - pinctrl-0 = <&pcie2_pins>; - pinctrl-names = "default"; - - perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; - - phy-tx0-term-offset = <7>; - - status = "disabled"; - }; - - adm_dma: dma@18300000 { - compatible = "qcom,adm"; - reg = <0x18300000 0x100000>; - interrupts = <0 170 0>; - #dma-cells = <1>; - - clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; - clock-names = "core", "iface"; - - resets = <&gcc ADM0_RESET>, - <&gcc ADM0_PBUS_RESET>, - <&gcc ADM0_C0_RESET>, - <&gcc ADM0_C1_RESET>, - <&gcc ADM0_C2_RESET>; - reset-names = "clk", "pbus", "c0", "c1", "c2"; - qcom,ee = <0>; - - status = "disabled"; - }; - - nand@1ac00000 { - compatible = "qcom,ipq806x-nand"; - reg = <0x1ac00000 0x800>; - - clocks = <&gcc EBI2_CLK>, - <&gcc EBI2_AON_CLK>; - clock-names = "core", "aon"; - - dmas = <&adm_dma 3>; - dma-names = "rxtx"; - qcom,cmd-crci = <15>; - qcom,data-crci = <3>; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - - nss_common: syscon@03000000 { - compatible = "syscon"; - reg = <0x03000000 0x0000FFFF>; - }; - - qsgmii_csr: syscon@1bb00000 { - compatible = "syscon"; - reg = <0x1bb00000 0x000001FF>; - }; - - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <7>; - snps,rd_osr_lmt = <7>; - snps,blen = <16 0 0 0 0 0 0>; - }; - - gmac0: ethernet@37000000 { - device_type = "network"; - compatible = "qcom,ipq806x-gmac"; - reg = <0x37000000 0x200000>; - interrupts = ; - interrupt-names = "macirq"; - - snps,axi-config = <&stmmac_axi_setup>; - snps,pbl = <32>; - snps,aal = <1>; - - qcom,nss-common = <&nss_common>; - qcom,qsgmii-csr = <&qsgmii_csr>; - - clocks = <&gcc GMAC_CORE1_CLK>; - clock-names = "stmmaceth"; - - resets = <&gcc GMAC_CORE1_RESET>; - reset-names = "stmmaceth"; - - status = "disabled"; - }; - - gmac1: ethernet@37200000 { - device_type = "network"; - compatible = "qcom,ipq806x-gmac"; - reg = <0x37200000 0x200000>; - interrupts = ; - interrupt-names = "macirq"; - - snps,axi-config = <&stmmac_axi_setup>; - snps,pbl = <32>; - snps,aal = <1>; - - qcom,nss-common = <&nss_common>; - qcom,qsgmii-csr = <&qsgmii_csr>; - - clocks = <&gcc GMAC_CORE2_CLK>; - clock-names = "stmmaceth"; - - resets = <&gcc GMAC_CORE2_RESET>; - reset-names = "stmmaceth"; - - status = "disabled"; - }; - - gmac2: ethernet@37400000 { - device_type = "network"; - compatible = "qcom,ipq806x-gmac"; - reg = <0x37400000 0x200000>; - interrupts = ; - interrupt-names = "macirq"; - - snps,axi-config = <&stmmac_axi_setup>; - snps,pbl = <32>; - snps,aal = <1>; - - qcom,nss-common = <&nss_common>; - qcom,qsgmii-csr = <&qsgmii_csr>; - - clocks = <&gcc GMAC_CORE3_CLK>; - clock-names = "stmmaceth"; - - resets = <&gcc GMAC_CORE3_RESET>; - reset-names = "stmmaceth"; - - status = "disabled"; - }; - - gmac3: ethernet@37600000 { - device_type = "network"; - compatible = "qcom,ipq806x-gmac"; - reg = <0x37600000 0x200000>; - interrupts = ; - interrupt-names = "macirq"; - - snps,axi-config = <&stmmac_axi_setup>; - snps,pbl = <32>; - snps,aal = <1>; - - qcom,nss-common = <&nss_common>; - qcom,qsgmii-csr = <&qsgmii_csr>; - - clocks = <&gcc GMAC_CORE4_CLK>; - clock-names = "stmmaceth"; - - resets = <&gcc GMAC_CORE4_RESET>; - reset-names = "stmmaceth"; - - status = "disabled"; - }; - - /* Temporary fixed regulator */ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - sdcc1bam:dma@12402000 { - compatible = "qcom,bam-v1.3.0"; - reg = <0x12402000 0x8000>; - interrupts = <0 98 0>; - clocks = <&gcc SDC1_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - sdcc3bam:dma@12182000 { - compatible = "qcom,bam-v1.3.0"; - reg = <0x12182000 0x8000>; - interrupts = <0 96 0>; - clocks = <&gcc SDC3_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - amba { - compatible = "arm,amba-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - sdcc1: sdcc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; - non-removable; - cap-sd-highspeed; - cap-mmc-highspeed; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; - }; - - sdcc3: sdcc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <192000000>; - #mmc-ddr-1_8v; - sd-uhs-sdr104; - sd-uhs-ddr50; - vqmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; - dma-names = "tx", "rx"; - }; - }; - }; - - sfpb_mutex: sfpb-mutex { - compatible = "qcom,sfpb-mutex"; - syscon = <&sfpb_mutex_block 4 4>; - - #hwlock-cells = <1>; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem>; - hwlocks = <&sfpb_mutex 3>; - }; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts deleted file mode 100644 index 7cd1c7b567..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts +++ /dev/null @@ -1,386 +0,0 @@ -#include "qcom-ipq8065.dtsi" - -#include - -/ { - model = "ZyXEL NBG6817"; - compatible = "zyxel,nbg6817", "qcom,ipq8065"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - sdcc1 = &sdcc1; - - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd"; - stdout-path = "serial0:115200n8"; - append-rootblock = "root=/dev/mmcblk0p"; - }; - - soc { - pinmux@800000 { - button_pins: button_pins { - mux { - pins = "gpio53", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio9", "gpio26", "gpio33", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - - clk { - pins = "gpio1"; - input-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; - input-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; - - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio16", "gpio17"; - function = "gpio"; - drive-strength = <12>; - }; - - pwr { - pins = "gpio17"; - bias-pull-down; - output-high; - }; - - ovc { - pins = "gpio16"; - bias-pull-up; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio14", "gpio15"; - function = "gpio"; - drive-strength = <12>; - }; - - pwr { - pins = "gpio14"; - bias-pull-down; - output-high; - }; - - ovc { - pins = "gpio15"; - bias-pull-up; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - gsbi5: gsbi@1a200000 { - qcom,mode = ; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash: m25p80@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <51200000>; - reg = <0>; - - partitions { - compatible = "qcom,smem"; - }; - }; - }; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; - }; - - usb30@1 { - status = "ok"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - force_gen1 = <1>; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ - 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ - 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ - 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ - 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ - 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ - 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ - 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ - 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ - 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ - 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ - 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ - 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ - 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - qca,ar8327-initvals = < - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x0000c 0x80 /* PAD6_MODE */ - >; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <0>; - qcom,rgmii_delay = <1>; - qcom,phy_mii_type = <0>; - qcom,emulation = <0>; - qcom,irq = <255>; - mdiobus = <&mdio0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,phy_mii_type = <1>; - qcom,emulation = <0>; - qcom,irq = <258>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - amba { - sdcc1: sdcc@12400000 { - status = "okay"; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - internet { - label = "nbg6817:white:internet"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "nbg6817:white:power"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi2g { - label = "nbg6817:amber:wifi2g"; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; - }; - - /* wifi2g amber from the manual is missing */ - - wifi5g { - label = "nbg6817:amber:wifi5g"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - /* wifi5g amber from the manual is missing */ - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts deleted file mode 100644 index 447c0da696..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts +++ /dev/null @@ -1,513 +0,0 @@ -#include "qcom-ipq8065.dtsi" - -#include - -/ { - model = "Netgear Nighthawk X4S R7800"; - compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - - rsvd@5fe00000 { - reg = <0x5fe00000 0x200000>; - reusable; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - label-mac-device = &gmac2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - pullups { - pins = "gpio39"; - bias-pull-up; - }; - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - - clk { - pins = "gpio1"; - input-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; - input-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - spi6_pins: spi6_pins { - mux { - pins = "gpio55", "gpio56", "gpio58"; - function = "gsbi6"; - bias-pull-down; - }; - - mosi { - pins = "gpio55"; - drive-strength = <12>; - }; - - miso { - pins = "gpio56"; - drive-strength = <14>; - }; - - cs { - pins = "gpio57"; - drive-strength = <12>; - bias-pull-up; - }; - - clk { - pins = "gpio58"; - drive-strength = <12>; - }; - - reset { - pins = "gpio33"; - drive-strength = <10>; - bias-pull-down; - output-high; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - ports-implemented = <0x1>; - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; - }; - - usb30@1 { - status = "ok"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - force_gen1 = <1>; - }; - - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art: art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - }; - - artbak: art@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - kernel@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - - ubi@1880000 { - label = "ubi"; - reg = <0x1880000 0x6080000>; - }; - - reserve@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; - }; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ - 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ - 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ - 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ - 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ - 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ - 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ - 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ - 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ - 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ - 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ - 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ - 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ - 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ - >; - qca,ar8327-vlans = < - 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */ - 0x2 0x21 /* VLAN2 Ports 0/5 */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - qca,ar8327-initvals = < - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x0000c 0x80 /* PAD6_MODE */ - >; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <0>; - qcom,rgmii_delay = <1>; - qcom,phy_mii_type = <0>; - qcom,emulation = <0>; - qcom,irq = <255>; - mdiobus = <&mdio0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&art 6>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,phy_mii_type = <1>; - qcom,emulation = <0>; - qcom,irq = <258>; - mdiobus = <&mdio0>; - - mtd-mac-address = <&art 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - power_white: power_white { - label = "r7800:white:power"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - power_amber: power_amber { - label = "r7800:amber:power"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - label = "r7800:white:wan"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - label = "r7800:amber:wan"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - usb1 { - label = "r7800:white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "r7800:white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "r7800:white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - wifi { - label = "r7800:white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "r7800:white:wps"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi deleted file mode 100644 index 86de2bd8be..0000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -#include "qcom-ipq8064-v2.0.dtsi" - -/ { - model = "Qualcomm IPQ8065"; - compatible = "qcom,ipq8065", "qcom,ipq8064"; - - qcom,pvs { - qcom,pvs-format-a; - qcom,speed0-pvs0-bin-v0 = - < 1725000000 1262500 >, - < 1400000000 1175000 >, - < 1000000000 1100000 >, - < 800000000 1050000 >, - < 600000000 1000000 >, - < 384000000 975000 >; - qcom,speed0-pvs1-bin-v0 = - < 1725000000 1225000 >, - < 1400000000 1150000 >, - < 1000000000 1075000 >, - < 800000000 1025000 >, - < 600000000 975000 >, - < 384000000 950000 >; - qcom,speed0-pvs2-bin-v0 = - < 1725000000 1200000 >, - < 1400000000 1125000 >, - < 1000000000 1050000 >, - < 800000000 1000000 >, - < 600000000 950000 >, - < 384000000 925000 >; - qcom,speed0-pvs3-bin-v0 = - < 1725000000 1175000 >, - < 1400000000 1100000 >, - < 1000000000 1025000 >, - < 800000000 975000 >, - < 600000000 925000 >, - < 384000000 900000 >; - qcom,speed0-pvs4-bin-v0 = - < 1725000000 1150000 >, - < 1400000000 1075000 >, - < 1000000000 1000000 >, - < 800000000 950000 >, - < 600000000 900000 >, - < 384000000 875000 >; - qcom,speed0-pvs5-bin-v0 = - < 1725000000 1100000 >, - < 1400000000 1025000 >, - < 1000000000 950000 >, - < 800000000 900000 >, - < 600000000 850000 >, - < 384000000 825000 >; - qcom,speed0-pvs6-bin-v0 = - < 1725000000 1050000 >, - < 1400000000 975000 >, - < 1000000000 900000 >, - < 800000000 850000 >, - < 600000000 800000 >, - < 384000000 775000 >; - }; - - soc: soc { - - rpm@108000 { - - regulators { - - smb208_s2a: s2a { - regulator-min-microvolt = <775000>; - regulator-max-microvolt = <1275000>; - }; - - smb208_s2b: s2b { - regulator-min-microvolt = <775000>; - regulator-max-microvolt = <1275000>; - }; - }; - }; - }; -}; diff --git a/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch deleted file mode 100644 index 83d7bbc6f4..0000000000 --- a/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001 -From: Thomas Pedersen -Date: Mon, 16 May 2016 17:58:50 -0700 -Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers - -Original patch from Andy Gross. - -This patch removes the crci information from the dma -channel property. At least one client device requires -using more than one CRCI value for a channel. This does -not match the current binding and the crci information -needs to be removed. - -Instead, the client device will provide this information -via other means. - -Signed-off-by: Andy Gross -Signed-off-by: Thomas Pedersen ---- - Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++---------- - 1 file changed, 6 insertions(+), 10 deletions(-) - ---- a/Documentation/devicetree/bindings/dma/qcom_adm.txt -+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt -@@ -4,8 +4,7 @@ Required properties: - - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960 - - reg: Address range for DMA registers - - interrupts: Should contain one interrupt shared by all channels --- #dma-cells: must be <2>. First cell denotes the channel number. Second cell -- denotes CRCI (client rate control interface) flow control assignment. -+- #dma-cells: must be <1>. First cell denotes the channel number. - - clocks: Should contain the core clock and interface clock. - - clock-names: Must contain "core" for the core clock and "iface" for the - interface clock. -@@ -22,7 +21,7 @@ Example: - compatible = "qcom,adm"; - reg = <0x18300000 0x100000>; - interrupts = <0 170 0>; -- #dma-cells = <2>; -+ #dma-cells = <1>; - - clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; - clock-names = "core", "iface"; -@@ -35,15 +34,12 @@ Example: - qcom,ee = <0>; - }; - --DMA clients must use the format descripted in the dma.txt file, using a three -+DMA clients must use the format descripted in the dma.txt file, using a two - cell specifier for each channel. - --Each dmas request consists of 3 cells: -+Each dmas request consists of two cells: - 1. phandle pointing to the DMA controller - 2. channel number -- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0. -- The CRCI is used for flow control. It identifies the peripheral device that -- is the source/destination for the transferred data. - - Example: - -@@ -55,7 +51,7 @@ Example: - - cs-gpios = <&qcom_pinmux 20 0>; - -- dmas = <&adm_dma 6 9>, -- <&adm_dma 5 10>; -+ dmas = <&adm_dma 6>, -+ <&adm_dma 5>; - dma-names = "rx", "tx"; - }; diff --git a/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch b/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch deleted file mode 100644 index fedb8ed798..0000000000 --- a/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch +++ /dev/null @@ -1,966 +0,0 @@ -From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001 -From: Thomas Pedersen -Date: Mon, 16 May 2016 17:58:51 -0700 -Subject: [PATCH 02/69] dmaengine: Add ADM driver - -Original patch by Andy Gross. - -Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA -controller found in the MSM8x60 and IPQ/APQ8064 platforms. - -The ADM supports both memory to memory transactions and memory -to/from peripheral device transactions. The controller also provides flow -control capabilities for transactions to/from peripheral devices. - -The initial release of this driver supports slave transfers to/from peripherals -and also incorporates CRCI (client rate control interface) flow control. - -Signed-off-by: Andy Gross -Signed-off-by: Thomas Pedersen ---- - drivers/dma/qcom/Kconfig | 10 + - drivers/dma/qcom/Makefile | 1 + - drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 911 insertions(+) - create mode 100644 drivers/dma/qcom/qcom_adm.c - ---- a/drivers/dma/qcom/Kconfig -+++ b/drivers/dma/qcom/Kconfig -@@ -27,3 +27,13 @@ config QCOM_HIDMA - (user to kernel, kernel to kernel, etc.). It only supports - memcpy interface. The core is not intended for general - purpose slave DMA. -+ -+config QCOM_ADM -+ tristate "Qualcomm ADM support" -+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM) -+ select DMA_ENGINE -+ select DMA_VIRTUAL_CHANNELS -+ ---help--- -+ Enable support for the Qualcomm ADM DMA controller. This controller -+ provides DMA capabilities for both general purpose and on-chip -+ peripheral devices. ---- a/drivers/dma/qcom/Makefile -+++ b/drivers/dma/qcom/Makefile -@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg - hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o - obj-$(CONFIG_QCOM_HIDMA) += hdma.o - hdma-objs := hidma_ll.o hidma.o hidma_dbg.o -+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o ---- /dev/null -+++ b/drivers/dma/qcom/qcom_adm.c -@@ -0,0 +1,914 @@ -+/* -+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../dmaengine.h" -+#include "../virt-dma.h" -+ -+/* ADM registers - calculated from channel number and security domain */ -+#define ADM_CHAN_MULTI 0x4 -+#define ADM_CI_MULTI 0x4 -+#define ADM_CRCI_MULTI 0x4 -+#define ADM_EE_MULTI 0x800 -+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan) -+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee) -+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee)) -+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan) -+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci)) -+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee)) -+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee)) -+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee)) -+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee)) -+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan)) -+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee)) -+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee)) -+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI) -+#define ADM_GP_CTL 0x3d8 -+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \ -+ ADM_EE_OFFS(ee)) -+ -+/* channel status */ -+#define ADM_CH_STATUS_VALID BIT(1) -+ -+/* channel result */ -+#define ADM_CH_RSLT_VALID BIT(31) -+#define ADM_CH_RSLT_ERR BIT(3) -+#define ADM_CH_RSLT_FLUSH BIT(2) -+#define ADM_CH_RSLT_TPD BIT(1) -+ -+/* channel conf */ -+#define ADM_CH_CONF_SHADOW_EN BIT(12) -+#define ADM_CH_CONF_MPU_DISABLE BIT(11) -+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9) -+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7) -+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11)) -+ -+/* channel result conf */ -+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1) -+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0) -+ -+/* CRCI CTL */ -+#define ADM_CRCI_CTL_MUX_SEL BIT(18) -+#define ADM_CRCI_CTL_RST BIT(17) -+ -+/* CI configuration */ -+#define ADM_CI_RANGE_END(x) (x << 24) -+#define ADM_CI_RANGE_START(x) (x << 16) -+#define ADM_CI_BURST_4_WORDS BIT(2) -+#define ADM_CI_BURST_8_WORDS BIT(3) -+ -+/* GP CTL */ -+#define ADM_GP_CTL_LP_EN BIT(12) -+#define ADM_GP_CTL_LP_CNT(x) (x << 8) -+ -+/* Command pointer list entry */ -+#define ADM_CPLE_LP BIT(31) -+#define ADM_CPLE_CMD_PTR_LIST BIT(29) -+ -+/* Command list entry */ -+#define ADM_CMD_LC BIT(31) -+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7) -+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3) -+ -+#define ADM_CMD_TYPE_SINGLE 0x0 -+#define ADM_CMD_TYPE_BOX 0x3 -+ -+#define ADM_CRCI_MUX_SEL BIT(4) -+#define ADM_DESC_ALIGN 8 -+#define ADM_MAX_XFER (SZ_64K-1) -+#define ADM_MAX_ROWS (SZ_64K-1) -+#define ADM_MAX_CHANNELS 16 -+ -+struct adm_desc_hw_box { -+ u32 cmd; -+ u32 src_addr; -+ u32 dst_addr; -+ u32 row_len; -+ u32 num_rows; -+ u32 row_offset; -+}; -+ -+struct adm_desc_hw_single { -+ u32 cmd; -+ u32 src_addr; -+ u32 dst_addr; -+ u32 len; -+}; -+ -+struct adm_async_desc { -+ struct virt_dma_desc vd; -+ struct adm_device *adev; -+ -+ size_t length; -+ enum dma_transfer_direction dir; -+ dma_addr_t dma_addr; -+ size_t dma_len; -+ -+ void *cpl; -+ dma_addr_t cp_addr; -+ u32 crci; -+ u32 mux; -+ u32 blk_size; -+}; -+ -+struct adm_chan { -+ struct virt_dma_chan vc; -+ struct adm_device *adev; -+ -+ /* parsed from DT */ -+ u32 id; /* channel id */ -+ -+ struct adm_async_desc *curr_txd; -+ struct dma_slave_config slave; -+ struct list_head node; -+ -+ int error; -+ int initialized; -+}; -+ -+static inline struct adm_chan *to_adm_chan(struct dma_chan *common) -+{ -+ return container_of(common, struct adm_chan, vc.chan); -+} -+ -+struct adm_device { -+ void __iomem *regs; -+ struct device *dev; -+ struct dma_device common; -+ struct device_dma_parameters dma_parms; -+ struct adm_chan *channels; -+ -+ u32 ee; -+ -+ struct clk *core_clk; -+ struct clk *iface_clk; -+ -+ struct reset_control *clk_reset; -+ struct reset_control *c0_reset; -+ struct reset_control *c1_reset; -+ struct reset_control *c2_reset; -+ int irq; -+}; -+ -+/** -+ * adm_free_chan - Frees dma resources associated with the specific channel -+ * -+ * Free all allocated descriptors associated with this channel -+ * -+ */ -+static void adm_free_chan(struct dma_chan *chan) -+{ -+ /* free all queued descriptors */ -+ vchan_free_chan_resources(to_virt_chan(chan)); -+} -+ -+/** -+ * adm_get_blksize - Get block size from burst value -+ * -+ */ -+static int adm_get_blksize(unsigned int burst) -+{ -+ int ret; -+ -+ switch (burst) { -+ case 16: -+ case 32: -+ case 64: -+ case 128: -+ ret = ffs(burst>>4) - 1; -+ break; -+ case 192: -+ ret = 4; -+ break; -+ case 256: -+ ret = 5; -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ -+ return ret; -+} -+ -+/** -+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers -+ * -+ * @achan: ADM channel -+ * @desc: Descriptor memory pointer -+ * @sg: Scatterlist entry -+ * @crci: CRCI value -+ * @burst: Burst size of transaction -+ * @direction: DMA transfer direction -+ */ -+static void *adm_process_fc_descriptors(struct adm_chan *achan, -+ void *desc, struct scatterlist *sg, u32 crci, u32 burst, -+ enum dma_transfer_direction direction) -+{ -+ struct adm_desc_hw_box *box_desc = NULL; -+ struct adm_desc_hw_single *single_desc; -+ u32 remainder = sg_dma_len(sg); -+ u32 rows, row_offset, crci_cmd; -+ u32 mem_addr = sg_dma_address(sg); -+ u32 *incr_addr = &mem_addr; -+ u32 *src, *dst; -+ -+ if (direction == DMA_DEV_TO_MEM) { -+ crci_cmd = ADM_CMD_SRC_CRCI(crci); -+ row_offset = burst; -+ src = &achan->slave.src_addr; -+ dst = &mem_addr; -+ } else { -+ crci_cmd = ADM_CMD_DST_CRCI(crci); -+ row_offset = burst << 16; -+ src = &mem_addr; -+ dst = &achan->slave.dst_addr; -+ } -+ -+ while (remainder >= burst) { -+ box_desc = desc; -+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd; -+ box_desc->row_offset = row_offset; -+ box_desc->src_addr = *src; -+ box_desc->dst_addr = *dst; -+ -+ rows = remainder / burst; -+ rows = min_t(u32, rows, ADM_MAX_ROWS); -+ box_desc->num_rows = rows << 16 | rows; -+ box_desc->row_len = burst << 16 | burst; -+ -+ *incr_addr += burst * rows; -+ remainder -= burst * rows; -+ desc += sizeof(*box_desc); -+ } -+ -+ /* if leftover bytes, do one single descriptor */ -+ if (remainder) { -+ single_desc = desc; -+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd; -+ single_desc->len = remainder; -+ single_desc->src_addr = *src; -+ single_desc->dst_addr = *dst; -+ desc += sizeof(*single_desc); -+ -+ if (sg_is_last(sg)) -+ single_desc->cmd |= ADM_CMD_LC; -+ } else { -+ if (box_desc && sg_is_last(sg)) -+ box_desc->cmd |= ADM_CMD_LC; -+ } -+ -+ return desc; -+} -+ -+/** -+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers -+ * -+ * @achan: ADM channel -+ * @desc: Descriptor memory pointer -+ * @sg: Scatterlist entry -+ * @direction: DMA transfer direction -+ */ -+static void *adm_process_non_fc_descriptors(struct adm_chan *achan, -+ void *desc, struct scatterlist *sg, -+ enum dma_transfer_direction direction) -+{ -+ struct adm_desc_hw_single *single_desc; -+ u32 remainder = sg_dma_len(sg); -+ u32 mem_addr = sg_dma_address(sg); -+ u32 *incr_addr = &mem_addr; -+ u32 *src, *dst; -+ -+ if (direction == DMA_DEV_TO_MEM) { -+ src = &achan->slave.src_addr; -+ dst = &mem_addr; -+ } else { -+ src = &mem_addr; -+ dst = &achan->slave.dst_addr; -+ } -+ -+ do { -+ single_desc = desc; -+ single_desc->cmd = ADM_CMD_TYPE_SINGLE; -+ single_desc->src_addr = *src; -+ single_desc->dst_addr = *dst; -+ single_desc->len = (remainder > ADM_MAX_XFER) ? -+ ADM_MAX_XFER : remainder; -+ -+ remainder -= single_desc->len; -+ *incr_addr += single_desc->len; -+ desc += sizeof(*single_desc); -+ } while (remainder); -+ -+ /* set last command if this is the end of the whole transaction */ -+ if (sg_is_last(sg)) -+ single_desc->cmd |= ADM_CMD_LC; -+ -+ return desc; -+} -+ -+/** -+ * adm_prep_slave_sg - Prep slave sg transaction -+ * -+ * @chan: dma channel -+ * @sgl: scatter gather list -+ * @sg_len: length of sg -+ * @direction: DMA transfer direction -+ * @flags: DMA flags -+ * @context: transfer context (unused) -+ */ -+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan, -+ struct scatterlist *sgl, unsigned int sg_len, -+ enum dma_transfer_direction direction, unsigned long flags, -+ void *context) -+{ -+ struct adm_chan *achan = to_adm_chan(chan); -+ struct adm_device *adev = achan->adev; -+ struct adm_async_desc *async_desc; -+ struct scatterlist *sg; -+ dma_addr_t cple_addr; -+ u32 i, burst; -+ u32 single_count = 0, box_count = 0, crci = 0; -+ void *desc; -+ u32 *cple; -+ int blk_size = 0; -+ -+ if (!is_slave_direction(direction)) { -+ dev_err(adev->dev, "invalid dma direction\n"); -+ return NULL; -+ } -+ -+ /* -+ * get burst value from slave configuration -+ */ -+ burst = (direction == DMA_MEM_TO_DEV) ? -+ achan->slave.dst_maxburst : -+ achan->slave.src_maxburst; -+ -+ /* if using flow control, validate burst and crci values */ -+ if (achan->slave.device_fc) { -+ -+ blk_size = adm_get_blksize(burst); -+ if (blk_size < 0) { -+ dev_err(adev->dev, "invalid burst value: %d\n", -+ burst); -+ return ERR_PTR(-EINVAL); -+ } -+ -+ crci = achan->slave.slave_id & 0xf; -+ if (!crci || achan->slave.slave_id > 0x1f) { -+ dev_err(adev->dev, "invalid crci value\n"); -+ return ERR_PTR(-EINVAL); -+ } -+ } -+ -+ /* iterate through sgs and compute allocation size of structures */ -+ for_each_sg(sgl, sg, sg_len, i) { -+ if (achan->slave.device_fc) { -+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst, -+ ADM_MAX_ROWS); -+ if (sg_dma_len(sg) % burst) -+ single_count++; -+ } else { -+ single_count += DIV_ROUND_UP(sg_dma_len(sg), -+ ADM_MAX_XFER); -+ } -+ } -+ -+ async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC); -+ if (!async_desc) -+ return ERR_PTR(-ENOMEM); -+ -+ if (crci) -+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ? -+ ADM_CRCI_CTL_MUX_SEL : 0; -+ async_desc->crci = crci; -+ async_desc->blk_size = blk_size; -+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) + -+ box_count * sizeof(struct adm_desc_hw_box) + -+ sizeof(*cple) + 2 * ADM_DESC_ALIGN; -+ -+ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC); -+ if (!async_desc->cpl) -+ goto free; -+ -+ async_desc->adev = adev; -+ -+ /* both command list entry and descriptors must be 8 byte aligned */ -+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN); -+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN); -+ -+ for_each_sg(sgl, sg, sg_len, i) { -+ async_desc->length += sg_dma_len(sg); -+ -+ if (achan->slave.device_fc) -+ desc = adm_process_fc_descriptors(achan, desc, sg, crci, -+ burst, direction); -+ else -+ desc = adm_process_non_fc_descriptors(achan, desc, sg, -+ direction); -+ } -+ -+ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl, -+ async_desc->dma_len, -+ DMA_TO_DEVICE); -+ if (dma_mapping_error(adev->dev, async_desc->dma_addr)) -+ goto free; -+ -+ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl); -+ -+ /* init cmd list */ -+ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple), -+ DMA_TO_DEVICE); -+ *cple = ADM_CPLE_LP; -+ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3; -+ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple), -+ DMA_TO_DEVICE); -+ -+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags); -+ -+free: -+ kfree(async_desc); -+ return ERR_PTR(-ENOMEM); -+} -+ -+/** -+ * adm_terminate_all - terminate all transactions on a channel -+ * @achan: adm dma channel -+ * -+ * Dequeues and frees all transactions, aborts current transaction -+ * No callbacks are done -+ * -+ */ -+static int adm_terminate_all(struct dma_chan *chan) -+{ -+ struct adm_chan *achan = to_adm_chan(chan); -+ struct adm_device *adev = achan->adev; -+ unsigned long flags; -+ LIST_HEAD(head); -+ -+ spin_lock_irqsave(&achan->vc.lock, flags); -+ vchan_get_all_descriptors(&achan->vc, &head); -+ -+ /* send flush command to terminate current transaction */ -+ writel_relaxed(0x0, -+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee)); -+ -+ spin_unlock_irqrestore(&achan->vc.lock, flags); -+ -+ vchan_dma_desc_free_list(&achan->vc, &head); -+ -+ return 0; -+} -+ -+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg) -+{ -+ struct adm_chan *achan = to_adm_chan(chan); -+ unsigned long flag; -+ -+ spin_lock_irqsave(&achan->vc.lock, flag); -+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config)); -+ spin_unlock_irqrestore(&achan->vc.lock, flag); -+ -+ return 0; -+} -+ -+/** -+ * adm_start_dma - start next transaction -+ * @achan - ADM dma channel -+ */ -+static void adm_start_dma(struct adm_chan *achan) -+{ -+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc); -+ struct adm_device *adev = achan->adev; -+ struct adm_async_desc *async_desc; -+ -+ lockdep_assert_held(&achan->vc.lock); -+ -+ if (!vd) -+ return; -+ -+ list_del(&vd->node); -+ -+ /* write next command list out to the CMD FIFO */ -+ async_desc = container_of(vd, struct adm_async_desc, vd); -+ achan->curr_txd = async_desc; -+ -+ /* reset channel error */ -+ achan->error = 0; -+ -+ if (!achan->initialized) { -+ /* enable interrupts */ -+ writel(ADM_CH_CONF_SHADOW_EN | -+ ADM_CH_CONF_PERM_MPU_CONF | -+ ADM_CH_CONF_MPU_DISABLE | -+ ADM_CH_CONF_SEC_DOMAIN(adev->ee), -+ adev->regs + ADM_CH_CONF(achan->id)); -+ -+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN, -+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee)); -+ -+ achan->initialized = 1; -+ } -+ -+ /* set the crci block size if this transaction requires CRCI */ -+ if (async_desc->crci) { -+ writel(async_desc->mux | async_desc->blk_size, -+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee)); -+ } -+ -+ /* make sure IRQ enable doesn't get reordered */ -+ wmb(); -+ -+ /* write next command list out to the CMD FIFO */ -+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3, -+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee)); -+} -+ -+/** -+ * adm_dma_irq - irq handler for ADM controller -+ * @irq: IRQ of interrupt -+ * @data: callback data -+ * -+ * IRQ handler for the bam controller -+ */ -+static irqreturn_t adm_dma_irq(int irq, void *data) -+{ -+ struct adm_device *adev = data; -+ u32 srcs, i; -+ struct adm_async_desc *async_desc; -+ unsigned long flags; -+ -+ srcs = readl_relaxed(adev->regs + -+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee)); -+ -+ for (i = 0; i < ADM_MAX_CHANNELS; i++) { -+ struct adm_chan *achan = &adev->channels[i]; -+ u32 status, result; -+ -+ if (srcs & BIT(i)) { -+ status = readl_relaxed(adev->regs + -+ ADM_CH_STATUS_SD(i, adev->ee)); -+ -+ /* if no result present, skip */ -+ if (!(status & ADM_CH_STATUS_VALID)) -+ continue; -+ -+ result = readl_relaxed(adev->regs + -+ ADM_CH_RSLT(i, adev->ee)); -+ -+ /* no valid results, skip */ -+ if (!(result & ADM_CH_RSLT_VALID)) -+ continue; -+ -+ /* flag error if transaction was flushed or failed */ -+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH)) -+ achan->error = 1; -+ -+ spin_lock_irqsave(&achan->vc.lock, flags); -+ async_desc = achan->curr_txd; -+ -+ achan->curr_txd = NULL; -+ -+ if (async_desc) { -+ vchan_cookie_complete(&async_desc->vd); -+ -+ /* kick off next DMA */ -+ adm_start_dma(achan); -+ } -+ -+ spin_unlock_irqrestore(&achan->vc.lock, flags); -+ } -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+/** -+ * adm_tx_status - returns status of transaction -+ * @chan: dma channel -+ * @cookie: transaction cookie -+ * @txstate: DMA transaction state -+ * -+ * Return status of dma transaction -+ */ -+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie, -+ struct dma_tx_state *txstate) -+{ -+ struct adm_chan *achan = to_adm_chan(chan); -+ struct virt_dma_desc *vd; -+ enum dma_status ret; -+ unsigned long flags; -+ size_t residue = 0; -+ -+ ret = dma_cookie_status(chan, cookie, txstate); -+ if (ret == DMA_COMPLETE || !txstate) -+ return ret; -+ -+ spin_lock_irqsave(&achan->vc.lock, flags); -+ -+ vd = vchan_find_desc(&achan->vc, cookie); -+ if (vd) -+ residue = container_of(vd, struct adm_async_desc, vd)->length; -+ -+ spin_unlock_irqrestore(&achan->vc.lock, flags); -+ -+ /* -+ * residue is either the full length if it is in the issued list, or 0 -+ * if it is in progress. We have no reliable way of determining -+ * anything inbetween -+ */ -+ dma_set_residue(txstate, residue); -+ -+ if (achan->error) -+ return DMA_ERROR; -+ -+ return ret; -+} -+ -+/** -+ * adm_issue_pending - starts pending transactions -+ * @chan: dma channel -+ * -+ * Issues all pending transactions and starts DMA -+ */ -+static void adm_issue_pending(struct dma_chan *chan) -+{ -+ struct adm_chan *achan = to_adm_chan(chan); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&achan->vc.lock, flags); -+ -+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd) -+ adm_start_dma(achan); -+ spin_unlock_irqrestore(&achan->vc.lock, flags); -+} -+ -+/** -+ * adm_dma_free_desc - free descriptor memory -+ * @vd: virtual descriptor -+ * -+ */ -+static void adm_dma_free_desc(struct virt_dma_desc *vd) -+{ -+ struct adm_async_desc *async_desc = container_of(vd, -+ struct adm_async_desc, vd); -+ -+ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr, -+ async_desc->dma_len, DMA_TO_DEVICE); -+ kfree(async_desc->cpl); -+ kfree(async_desc); -+} -+ -+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan, -+ u32 index) -+{ -+ achan->id = index; -+ achan->adev = adev; -+ -+ vchan_init(&achan->vc, &adev->common); -+ achan->vc.desc_free = adm_dma_free_desc; -+} -+ -+static int adm_dma_probe(struct platform_device *pdev) -+{ -+ struct adm_device *adev; -+ struct resource *iores; -+ int ret; -+ u32 i; -+ -+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL); -+ if (!adev) -+ return -ENOMEM; -+ -+ adev->dev = &pdev->dev; -+ -+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ adev->regs = devm_ioremap_resource(&pdev->dev, iores); -+ if (IS_ERR(adev->regs)) -+ return PTR_ERR(adev->regs); -+ -+ adev->irq = platform_get_irq(pdev, 0); -+ if (adev->irq < 0) -+ return adev->irq; -+ -+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee); -+ if (ret) { -+ dev_err(adev->dev, "Execution environment unspecified\n"); -+ return ret; -+ } -+ -+ adev->core_clk = devm_clk_get(adev->dev, "core"); -+ if (IS_ERR(adev->core_clk)) -+ return PTR_ERR(adev->core_clk); -+ -+ ret = clk_prepare_enable(adev->core_clk); -+ if (ret) { -+ dev_err(adev->dev, "failed to prepare/enable core clock\n"); -+ return ret; -+ } -+ -+ adev->iface_clk = devm_clk_get(adev->dev, "iface"); -+ if (IS_ERR(adev->iface_clk)) { -+ ret = PTR_ERR(adev->iface_clk); -+ goto err_disable_core_clk; -+ } -+ -+ ret = clk_prepare_enable(adev->iface_clk); -+ if (ret) { -+ dev_err(adev->dev, "failed to prepare/enable iface clock\n"); -+ goto err_disable_core_clk; -+ } -+ -+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk"); -+ if (IS_ERR(adev->clk_reset)) { -+ dev_err(adev->dev, "failed to get ADM0 reset\n"); -+ ret = PTR_ERR(adev->clk_reset); -+ goto err_disable_clks; -+ } -+ -+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0"); -+ if (IS_ERR(adev->c0_reset)) { -+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n"); -+ ret = PTR_ERR(adev->c0_reset); -+ goto err_disable_clks; -+ } -+ -+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1"); -+ if (IS_ERR(adev->c1_reset)) { -+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n"); -+ ret = PTR_ERR(adev->c1_reset); -+ goto err_disable_clks; -+ } -+ -+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2"); -+ if (IS_ERR(adev->c2_reset)) { -+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n"); -+ ret = PTR_ERR(adev->c2_reset); -+ goto err_disable_clks; -+ } -+ -+ reset_control_assert(adev->clk_reset); -+ reset_control_assert(adev->c0_reset); -+ reset_control_assert(adev->c1_reset); -+ reset_control_assert(adev->c2_reset); -+ -+ reset_control_deassert(adev->clk_reset); -+ reset_control_deassert(adev->c0_reset); -+ reset_control_deassert(adev->c1_reset); -+ reset_control_deassert(adev->c2_reset); -+ -+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS, -+ sizeof(*adev->channels), GFP_KERNEL); -+ -+ if (!adev->channels) { -+ ret = -ENOMEM; -+ goto err_disable_clks; -+ } -+ -+ /* allocate and initialize channels */ -+ INIT_LIST_HEAD(&adev->common.channels); -+ -+ for (i = 0; i < ADM_MAX_CHANNELS; i++) -+ adm_channel_init(adev, &adev->channels[i], i); -+ -+ /* reset CRCIs */ -+ for (i = 0; i < 16; i++) -+ writel(ADM_CRCI_CTL_RST, adev->regs + -+ ADM_CRCI_CTL(i, adev->ee)); -+ -+ /* configure client interfaces */ -+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) | -+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0)); -+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) | -+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1)); -+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) | -+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2)); -+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf), -+ adev->regs + ADM_GP_CTL); -+ -+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq, -+ 0, "adm_dma", adev); -+ if (ret) -+ goto err_disable_clks; -+ -+ platform_set_drvdata(pdev, adev); -+ -+ adev->common.dev = adev->dev; -+ adev->common.dev->dma_parms = &adev->dma_parms; -+ -+ /* set capabilities */ -+ dma_cap_zero(adev->common.cap_mask); -+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask); -+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask); -+ -+ /* initialize dmaengine apis */ -+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV); -+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR; -+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ adev->common.device_free_chan_resources = adm_free_chan; -+ adev->common.device_prep_slave_sg = adm_prep_slave_sg; -+ adev->common.device_issue_pending = adm_issue_pending; -+ adev->common.device_tx_status = adm_tx_status; -+ adev->common.device_terminate_all = adm_terminate_all; -+ adev->common.device_config = adm_slave_config; -+ -+ ret = dma_async_device_register(&adev->common); -+ if (ret) { -+ dev_err(adev->dev, "failed to register dma async device\n"); -+ goto err_disable_clks; -+ } -+ -+ ret = of_dma_controller_register(pdev->dev.of_node, -+ of_dma_xlate_by_chan_id, -+ &adev->common); -+ if (ret) -+ goto err_unregister_dma; -+ -+ return 0; -+ -+err_unregister_dma: -+ dma_async_device_unregister(&adev->common); -+err_disable_clks: -+ clk_disable_unprepare(adev->iface_clk); -+err_disable_core_clk: -+ clk_disable_unprepare(adev->core_clk); -+ -+ return ret; -+} -+ -+static int adm_dma_remove(struct platform_device *pdev) -+{ -+ struct adm_device *adev = platform_get_drvdata(pdev); -+ struct adm_chan *achan; -+ u32 i; -+ -+ of_dma_controller_free(pdev->dev.of_node); -+ dma_async_device_unregister(&adev->common); -+ -+ for (i = 0; i < ADM_MAX_CHANNELS; i++) { -+ achan = &adev->channels[i]; -+ -+ /* mask IRQs for this channel/EE pair */ -+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee)); -+ -+ adm_terminate_all(&adev->channels[i].vc.chan); -+ } -+ -+ devm_free_irq(adev->dev, adev->irq, adev); -+ -+ clk_disable_unprepare(adev->core_clk); -+ clk_disable_unprepare(adev->iface_clk); -+ -+ return 0; -+} -+ -+static const struct of_device_id adm_of_match[] = { -+ { .compatible = "qcom,adm", }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, adm_of_match); -+ -+static struct platform_driver adm_dma_driver = { -+ .probe = adm_dma_probe, -+ .remove = adm_dma_remove, -+ .driver = { -+ .name = "adm-dma-engine", -+ .of_match_table = adm_of_match, -+ }, -+}; -+ -+module_platform_driver(adm_dma_driver); -+ -+MODULE_AUTHOR("Andy Gross "); -+MODULE_DESCRIPTION("QCOM ADM DMA engine driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch deleted file mode 100644 index b2a6afe0dd..0000000000 --- a/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 9 Mar 2017 08:16:10 +0100 -Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4 - -This patch was not annotated and comes from the v4.4 tree. - -Signed-off-by: John Crispin ---- - drivers/clk/qcom/gcc-ipq806x.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = { - .parent_names = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, -- .flags = CLK_SET_PARENT_GATE, -+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED, - }, - }, - }; -@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk - }, - .num_parents = 1, - .ops = &clk_branch_ops, -- .flags = CLK_SET_RATE_PARENT, -+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, - }, - }, - }; -@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi1_h_clk", - .ops = &clk_branch_ops, -+ .flags = CLK_IGNORE_UNUSED, - }, - }, - }; diff --git a/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch b/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch deleted file mode 100644 index a7cfac5447..0000000000 --- a/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch +++ /dev/null @@ -1,282 +0,0 @@ -From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001 -From: Mathieu Olivari -Date: Thu, 9 Mar 2017 08:18:08 +0100 -Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms - -On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is -used to store partition layout. This new parser can now be used to read -SMEM and use it to register an MTD layout according to its content. - -Signed-off-by: Mathieu Olivari -Signed-off-by: Ram Chandra Jangir ---- - drivers/mtd/Kconfig | 7 ++ - drivers/mtd/Makefile | 1 + - drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 236 insertions(+) - create mode 100644 drivers/mtd/qcom_smem_part.c - ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. - -+config MTD_QCOM_SMEM_PARTS -+ tristate "QCOM SMEM partitioning support" -+ depends on QCOM_SMEM -+ help -+ This provides partitions parser for QCOM devices using SMEM -+ such as IPQ806x. -+ - comment "User Modules And Translation Layers" - - # ---- /dev/null -+++ b/drivers/mtd/qcom_smem_part.c -@@ -0,0 +1,235 @@ -+/* -+ * Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* Processor/host identifier for the application processor */ -+#define SMEM_HOST_APPS 0 -+ -+/* SMEM items index */ -+#define SMEM_AARM_PARTITION_TABLE 9 -+#define SMEM_BOOT_FLASH_TYPE 421 -+#define SMEM_BOOT_FLASH_BLOCK_SIZE 424 -+ -+/* SMEM Flash types */ -+#define SMEM_FLASH_NAND 2 -+#define SMEM_FLASH_SPI 6 -+ -+#define SMEM_PART_NAME_SZ 16 -+#define SMEM_PARTS_MAX 32 -+ -+struct smem_partition { -+ char name[SMEM_PART_NAME_SZ]; -+ __le32 start; -+ __le32 size; -+ __le32 attr; -+}; -+ -+struct smem_partition_table { -+ u8 magic[8]; -+ __le32 version; -+ __le32 len; -+ struct smem_partition parts[SMEM_PARTS_MAX]; -+}; -+ -+/* SMEM Magic values in partition table */ -+static const u8 SMEM_PTABLE_MAGIC[] = { -+ 0xaa, 0x73, 0xee, 0x55, -+ 0xdb, 0xbd, 0x5e, 0xe3, -+}; -+ -+static int qcom_smem_get_flash_blksz(u64 **smem_blksz) -+{ -+ size_t size; -+ -+ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE, -+ &size); -+ -+ if (IS_ERR(*smem_blksz)) { -+ pr_err("Unable to read flash blksz from SMEM\n"); -+ return -ENOENT; -+ } -+ -+ if (size != sizeof(**smem_blksz)) { -+ pr_err("Invalid flash blksz size in SMEM\n"); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int qcom_smem_get_flash_type(u64 **smem_flash_type) -+{ -+ size_t size; -+ -+ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE, -+ &size); -+ -+ if (IS_ERR(*smem_flash_type)) { -+ pr_err("Unable to read flash type from SMEM\n"); -+ return -ENOENT; -+ } -+ -+ if (size != sizeof(**smem_flash_type)) { -+ pr_err("Invalid flash type size in SMEM\n"); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts) -+{ -+ size_t size; -+ -+ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE, -+ &size); -+ -+ if (IS_ERR(*pparts)) { -+ pr_err("Unable to read partition table from SMEM\n"); -+ return -ENOENT; -+ } -+ -+ return 0; -+} -+ -+static int of_dev_node_match(struct device *dev, void *data) -+{ -+ return dev->of_node == data; -+} -+ -+static bool is_spi_device(struct device_node *np) -+{ -+ struct device *dev; -+ -+ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match); -+ if (!dev) -+ return false; -+ -+ put_device(dev); -+ return true; -+} -+ -+static int parse_qcom_smem_partitions(struct mtd_info *master, -+ const struct mtd_partition **pparts, -+ struct mtd_part_parser_data *data) -+{ -+ struct smem_partition_table *smem_parts; -+ u64 *smem_flash_type, *smem_blksz; -+ struct mtd_partition *mtd_parts; -+ struct device_node *of_node = master->dev.of_node; -+ int i, ret; -+ -+ /* -+ * SMEM will only store the partition table of the boot device. -+ * If this is not the boot device, do not return any partition. -+ */ -+ ret = qcom_smem_get_flash_type(&smem_flash_type); -+ if (ret < 0) -+ return ret; -+ -+ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master)) -+ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node))) -+ return 0; -+ -+ /* -+ * Just for sanity purpose, make sure the block size in SMEM matches the -+ * block size of the MTD device -+ */ -+ ret = qcom_smem_get_flash_blksz(&smem_blksz); -+ if (ret < 0) -+ return ret; -+ -+ if (*smem_blksz != master->erasesize) { -+ pr_err("SMEM block size differs from MTD block size\n"); -+ return -EINVAL; -+ } -+ -+ /* Get partition pointer from SMEM */ -+ ret = qcom_smem_get_flash_partitions(&smem_parts); -+ if (ret < 0) -+ return ret; -+ -+ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic, -+ sizeof(SMEM_PTABLE_MAGIC))) { -+ pr_err("SMEM partition magic invalid\n"); -+ return -EINVAL; -+ } -+ -+ /* Allocate and populate the mtd structures */ -+ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts), -+ GFP_KERNEL); -+ if (!mtd_parts) -+ return -ENOMEM; -+ -+ for (i = 0; i < smem_parts->len; i++) { -+ struct smem_partition *s_part = &smem_parts->parts[i]; -+ struct mtd_partition *m_part = &mtd_parts[i]; -+ -+ m_part->name = s_part->name; -+ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz); -+ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz); -+ -+ /* -+ * The last SMEM partition may have its size marked as -+ * something like 0xffffffff, which means "until the end of the -+ * flash device". In this case, truncate it. -+ */ -+ if (m_part->offset + m_part->size > master->size) -+ m_part->size = master->size - m_part->offset; -+ } -+ -+ *pparts = mtd_parts; -+ -+ return smem_parts->len; -+} -+ -+static const struct of_device_id qcom_smem_of_match_table[] = { -+ { .compatible = "qcom,smem" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table); -+ -+static struct mtd_part_parser qcom_smem_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = parse_qcom_smem_partitions, -+ .name = "qcom-smem", -+ .of_match_table = qcom_smem_of_match_table, -+}; -+ -+static int __init qcom_smem_parser_init(void) -+{ -+ register_mtd_parser(&qcom_smem_parser); -+ return 0; -+} -+ -+static void __exit qcom_smem_parser_exit(void) -+{ -+ deregister_mtd_parser(&qcom_smem_parser); -+} -+ -+module_init(qcom_smem_parser_init); -+module_exit(qcom_smem_parser_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Mathieu Olivari "); -+MODULE_DESCRIPTION("Parsing code for SMEM based partition tables"); ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o -+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o - obj-y += parsers/ - - # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch deleted file mode 100644 index e430329acd..0000000000 --- a/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch +++ /dev/null @@ -1,616 +0,0 @@ -From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001 -From: Andy Gross -Date: Thu, 9 Mar 2017 08:19:18 +0100 -Subject: [PATCH 32/69] phy: add qcom dwc3 phy - -Signed-off-by: Andy Gross ---- - drivers/phy/Kconfig | 12 + - drivers/phy/Makefile | 1 + - drivers/phy/phy-qcom-dwc3.c | 575 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 588 insertions(+) - create mode 100644 drivers/phy/phy-qcom-dwc3.c - ---- a/drivers/phy/qualcomm/Kconfig -+++ b/drivers/phy/qualcomm/Kconfig -@@ -56,3 +56,15 @@ config PHY_QCOM_USB_HSIC - select GENERIC_PHY - help - Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. -+ -+config PHY_QCOM_DWC3 -+ tristate "QCOM DWC3 USB PHY support" -+ depends on ARCH_QCOM -+ depends on HAS_IOMEM -+ depends on OF -+ select GENERIC_PHY -+ help -+ This option enables support for the Synopsis PHYs present inside the -+ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS -+ PHY controllers. -+ ---- a/drivers/phy/qualcomm/Makefile -+++ b/drivers/phy/qualcomm/Makefile -@@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom- - obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o - obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o - obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o -+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o ---- /dev/null -+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c -@@ -0,0 +1,575 @@ -+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+* This program is distributed in the hope that it will be useful, -+* but WITHOUT ANY WARRANTY; without even the implied warranty of -+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+* GNU General Public License for more details. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/** -+ * USB QSCRATCH Hardware registers -+ */ -+#define QSCRATCH_GENERAL_CFG (0x08) -+#define HSUSB_PHY_CTRL_REG (0x10) -+ -+/* PHY_CTRL_REG */ -+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24) -+#define HSUSB_CTRL_USB2_SUSPEND BIT(23) -+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21) -+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20) -+#define HSUSB_CTRL_USE_CLKCORE BIT(18) -+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17) -+#define HSUSB_CTRL_COMMONONN BIT(11) -+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9) -+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8) -+#define HSUSB_CTRL_CLAMP_EN BIT(7) -+#define HSUSB_CTRL_RETENABLEN BIT(1) -+#define HSUSB_CTRL_POR BIT(0) -+ -+/* QSCRATCH_GENERAL_CFG */ -+#define HSUSB_GCFG_XHCI_REV BIT(2) -+ -+/** -+ * USB QSCRATCH Hardware registers -+ */ -+#define SSUSB_PHY_CTRL_REG (0x00) -+#define SSUSB_PHY_PARAM_CTRL_1 (0x04) -+#define SSUSB_PHY_PARAM_CTRL_2 (0x08) -+#define CR_PROTOCOL_DATA_IN_REG (0x0c) -+#define CR_PROTOCOL_DATA_OUT_REG (0x10) -+#define CR_PROTOCOL_CAP_ADDR_REG (0x14) -+#define CR_PROTOCOL_CAP_DATA_REG (0x18) -+#define CR_PROTOCOL_READ_REG (0x1c) -+#define CR_PROTOCOL_WRITE_REG (0x20) -+ -+/* PHY_CTRL_REG */ -+#define SSUSB_CTRL_REF_USE_PAD BIT(28) -+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27) -+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24) -+#define SSUSB_CTRL_SS_PHY_EN BIT(8) -+#define SSUSB_CTRL_SS_PHY_RESET BIT(7) -+ -+/* SSPHY control registers */ -+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane) -+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane) -+ -+/* SSPHY SoC version specific values */ -+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */ -+#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit -+ preemphasis */ -+#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */ -+ -+/* QSCRATCH PHY_PARAM_CTRL1 fields */ -+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u -+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u -+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u -+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u -+ -+#define PHY_PARAM_CTRL1_MASK \ -+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \ -+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \ -+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \ -+ PHY_PARAM_CTRL1_LOS_BIAS_MASK) -+ -+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \ -+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK) -+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \ -+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK) -+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \ -+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK) -+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \ -+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK) -+ -+/* RX OVRD IN HI bits */ -+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13) -+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12) -+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11) -+#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700 -+#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8 -+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7) -+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6) -+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5) -+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018 -+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2) -+#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003 -+ -+/* TX OVRD DRV LO register bits */ -+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F -+#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80 -+#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7 -+#define TX_OVRD_DRV_LO_EN BIT(14) -+ -+/* SS CAP register bits */ -+#define SS_CR_CAP_ADDR_REG BIT(0) -+#define SS_CR_CAP_DATA_REG BIT(0) -+#define SS_CR_READ_REG BIT(0) -+#define SS_CR_WRITE_REG BIT(0) -+ -+struct qcom_dwc3_usb_phy { -+ void __iomem *base; -+ struct device *dev; -+ struct clk *xo_clk; -+ struct clk *ref_clk; -+ u32 rx_eq; -+ u32 tx_deamp_3_5db; -+ u32 mpll; -+}; -+ -+struct qcom_dwc3_phy_drvdata { -+ struct phy_ops ops; -+ u32 clk_rate; -+}; -+ -+/** -+ * Write register and read back masked value to confirm it is written -+ * -+ * @base - QCOM DWC3 PHY base virtual address. -+ * @offset - register offset. -+ * @mask - register bitmask specifying what should be updated -+ * @val - value to write. -+ */ -+static inline void qcom_dwc3_phy_write_readback( -+ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset, -+ const u32 mask, u32 val) -+{ -+ u32 write_val, tmp = readl(phy_dwc3->base + offset); -+ -+ tmp &= ~mask; /* retain other bits */ -+ write_val = tmp | val; -+ -+ writel(write_val, phy_dwc3->base + offset); -+ -+ /* Read back to see if val was written */ -+ tmp = readl(phy_dwc3->base + offset); -+ tmp &= mask; /* clear other bits */ -+ -+ if (tmp != val) -+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", -+ val, offset); -+} -+ -+static int wait_for_latch(void __iomem *addr) -+{ -+ u32 retry = 10; -+ -+ while (true) { -+ if (!readl(addr)) -+ break; -+ -+ if (--retry == 0) -+ return -ETIMEDOUT; -+ -+ usleep_range(10, 20); -+ } -+ -+ return 0; -+} -+ -+/** -+ * Write SSPHY register -+ * -+ * @base - QCOM DWC3 PHY base virtual address. -+ * @addr - SSPHY address to write. -+ * @val - value to write. -+ */ -+static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3, -+ u32 addr, u32 val) -+{ -+ int ret; -+ -+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); -+ writel(SS_CR_CAP_ADDR_REG, phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); -+ -+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); -+ if (ret) -+ goto err_wait; -+ -+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); -+ writel(SS_CR_CAP_DATA_REG, phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG); -+ -+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG); -+ if (ret) -+ goto err_wait; -+ -+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG); -+ -+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG); -+ -+err_wait: -+ if (ret) -+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n"); -+ return ret; -+} -+ -+/** -+ * Read SSPHY register. -+ * -+ * @base - QCOM DWC3 PHY base virtual address. -+ * @addr - SSPHY address to read. -+ */ -+static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val) -+{ -+ int ret; -+ -+ writel(addr, base + CR_PROTOCOL_DATA_IN_REG); -+ writel(SS_CR_CAP_ADDR_REG, base + CR_PROTOCOL_CAP_ADDR_REG); -+ -+ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG); -+ if (ret) -+ goto err_wait; -+ -+ /* -+ * Due to hardware bug, first read of SSPHY register might be -+ * incorrect. Hence as workaround, SW should perform SSPHY register -+ * read twice, but use only second read and ignore first read. -+ */ -+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG); -+ -+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG); -+ if (ret) -+ goto err_wait; -+ -+ /* throwaway read */ -+ readl(base + CR_PROTOCOL_DATA_OUT_REG); -+ -+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG); -+ -+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG); -+ if (ret) -+ goto err_wait; -+ -+ *val = readl(base + CR_PROTOCOL_DATA_OUT_REG); -+ -+err_wait: -+ return ret; -+} -+ -+static int qcom_dwc3_hs_phy_init(struct phy *phy) -+{ -+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); -+ int ret; -+ u32 val; -+ -+ ret = clk_prepare_enable(phy_dwc3->xo_clk); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(phy_dwc3->ref_clk); -+ if (ret) { -+ clk_disable_unprepare(phy_dwc3->xo_clk); -+ return ret; -+ } -+ -+ /* -+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel -+ * enable clamping, and disable RETENTION (power-on default is ENABLED) -+ */ -+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP | -+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN | -+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP | -+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID | -+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70; -+ -+ /* use core clock if external reference is not present */ -+ if (!phy_dwc3->xo_clk) -+ val |= HSUSB_CTRL_USE_CLKCORE; -+ -+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG); -+ usleep_range(2000, 2200); -+ -+ /* Disable (bypass) VBUS and ID filters */ -+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG); -+ -+ return 0; -+} -+ -+static int qcom_dwc3_hs_phy_exit(struct phy *phy) -+{ -+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); -+ -+ clk_disable_unprepare(phy_dwc3->ref_clk); -+ clk_disable_unprepare(phy_dwc3->xo_clk); -+ -+ return 0; -+} -+ -+static int qcom_dwc3_ss_phy_init(struct phy *phy) -+{ -+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); -+ int ret; -+ u32 data = 0; -+ -+ ret = clk_prepare_enable(phy_dwc3->xo_clk); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(phy_dwc3->ref_clk); -+ if (ret) { -+ clk_disable_unprepare(phy_dwc3->xo_clk); -+ return ret; -+ } -+ -+ /* reset phy */ -+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG); -+ writel(data | SSUSB_CTRL_SS_PHY_RESET, -+ phy_dwc3->base + SSUSB_PHY_CTRL_REG); -+ usleep_range(2000, 2200); -+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); -+ -+ /* clear REF_PAD if we don't have XO clk */ -+ if (!phy_dwc3->xo_clk) -+ data &= ~SSUSB_CTRL_REF_USE_PAD; -+ else -+ data |= SSUSB_CTRL_REF_USE_PAD; -+ -+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); -+ -+ /* wait for ref clk to become stable, this can take up to 30ms */ -+ msleep(30); -+ -+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT; -+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); -+ -+ /* -+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates -+ * in HS mode instead of SS mode. Workaround it by asserting -+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode -+ */ -+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data); -+ if (ret) -+ goto err_phy_trans; -+ -+ data |= (1 << 7); -+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data); -+ if (ret) -+ goto err_phy_trans; -+ -+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data); -+ if (ret) -+ goto err_phy_trans; -+ -+ data &= ~0xff0; -+ data |= 0x20; -+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data); -+ if (ret) -+ goto err_phy_trans; -+ -+ /* -+ * Fix RX Equalization setting as follows -+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0 -+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1 -+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version -+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1 -+ */ -+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, -+ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data); -+ if (ret) -+ goto err_phy_trans; -+ -+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN; -+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD; -+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK; -+ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT; -+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD; -+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, -+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data); -+ if (ret) -+ goto err_phy_trans; -+ -+ /* -+ * Set EQ and TX launch amplitudes as follows -+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version -+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110 -+ * LANE0.TX_OVRD_DRV_LO.EN set to 1. -+ */ -+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, -+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data); -+ if (ret) -+ goto err_phy_trans; -+ -+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK; -+ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT; -+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK; -+ data |= 0x6E; -+ data |= TX_OVRD_DRV_LO_EN; -+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, -+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data); -+ if (ret) -+ goto err_phy_trans; -+ -+ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll); -+ -+ /* -+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows -+ * TX_FULL_SWING [26:20] amplitude to 110 -+ * TX_DEEMPH_6DB [19:14] to 32 -+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version -+ * LOS_BIAS [7:3] to 9 -+ */ -+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1); -+ -+ data &= ~PHY_PARAM_CTRL1_MASK; -+ -+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) | -+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) | -+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) | -+ PHY_PARAM_CTRL1_LOS_BIAS(0x9); -+ -+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1, -+ PHY_PARAM_CTRL1_MASK, data); -+ -+err_phy_trans: -+ return ret; -+} -+ -+static int qcom_dwc3_ss_phy_exit(struct phy *phy) -+{ -+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); -+ -+ /* Sequence to put SSPHY in low power state: -+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG -+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG -+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention -+ */ -+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, -+ SSUSB_CTRL_SS_PHY_EN, 0x0); -+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, -+ SSUSB_CTRL_REF_USE_PAD, 0x0); -+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, -+ SSUSB_CTRL_TEST_POWERDOWN, 0x0); -+ -+ clk_disable_unprepare(phy_dwc3->ref_clk); -+ clk_disable_unprepare(phy_dwc3->xo_clk); -+ -+ return 0; -+} -+ -+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = { -+ .ops = { -+ .init = qcom_dwc3_hs_phy_init, -+ .exit = qcom_dwc3_hs_phy_exit, -+ .owner = THIS_MODULE, -+ }, -+ .clk_rate = 60000000, -+}; -+ -+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = { -+ .ops = { -+ .init = qcom_dwc3_ss_phy_init, -+ .exit = qcom_dwc3_ss_phy_exit, -+ .owner = THIS_MODULE, -+ }, -+ .clk_rate = 125000000, -+}; -+ -+static const struct of_device_id qcom_dwc3_phy_table[] = { -+ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata }, -+ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata }, -+ { /* Sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table); -+ -+static int qcom_dwc3_phy_probe(struct platform_device *pdev) -+{ -+ struct qcom_dwc3_usb_phy *phy_dwc3; -+ struct phy_provider *phy_provider; -+ struct phy *generic_phy; -+ struct resource *res; -+ const struct of_device_id *match; -+ const struct qcom_dwc3_phy_drvdata *data; -+ struct device_node *np; -+ -+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL); -+ if (!phy_dwc3) -+ return -ENOMEM; -+ -+ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node); -+ data = match->data; -+ -+ phy_dwc3->dev = &pdev->dev; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res); -+ if (IS_ERR(phy_dwc3->base)) -+ return PTR_ERR(phy_dwc3->base); -+ -+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref"); -+ if (IS_ERR(phy_dwc3->ref_clk)) { -+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n"); -+ return PTR_ERR(phy_dwc3->ref_clk); -+ } -+ -+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate); -+ -+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo"); -+ if (IS_ERR(phy_dwc3->xo_clk)) { -+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n"); -+ phy_dwc3->xo_clk = NULL; -+ } -+ -+ /* Parse device node to probe HSIO settings */ -+ np = of_node_get(pdev->dev.of_node); -+ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy", -+ strlen(match->compatible))) { -+ -+ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) || -+ of_property_read_u32(np, "tx_deamp_3_5db", -+ &phy_dwc3->tx_deamp_3_5db) || -+ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) { -+ -+ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n"); -+ -+ /* Default HSIO settings */ -+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE; -+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB; -+ phy_dwc3->mpll = SSPHY_MPLL_VALUE; -+ } -+ } -+ -+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, -+ &data->ops); -+ -+ if (IS_ERR(generic_phy)) -+ return PTR_ERR(generic_phy); -+ -+ phy_set_drvdata(generic_phy, phy_dwc3); -+ platform_set_drvdata(pdev, phy_dwc3); -+ -+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev, -+ of_phy_simple_xlate); -+ -+ if (IS_ERR(phy_provider)) -+ return PTR_ERR(phy_provider); -+ -+ return 0; -+} -+ -+static struct platform_driver qcom_dwc3_phy_driver = { -+ .probe = qcom_dwc3_phy_probe, -+ .driver = { -+ .name = "qcom-dwc3-usb-phy", -+ .owner = THIS_MODULE, -+ .of_match_table = qcom_dwc3_phy_table, -+ }, -+}; -+ -+module_platform_driver(qcom_dwc3_phy_driver); -+ -+MODULE_ALIAS("platform:phy-qcom-dwc3"); -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Andy Gross "); -+MODULE_AUTHOR("Ivan T. Ivanov "); -+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver"); diff --git a/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch deleted file mode 100644 index a6c7953aaa..0000000000 --- a/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001 -From: Mathieu Olivari -Date: Tue, 21 Apr 2015 19:09:07 -0700 -Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is - enabled - -If multiple PCIe devices are present in the system, the kernel will -panic at boot time when trying to scan the PCI buses. This happens on -IPQ806x based platforms, which has 3 PCIe ports. - -Enabling this option allows the kernel to assign the pci-domains -according to the device-tree content. This allows multiple PCIe -controllers to coexist in the system. - -Signed-off-by: Mathieu Olivari ---- - arch/arm/mach-qcom/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/mach-qcom/Kconfig -+++ b/arch/arm/mach-qcom/Kconfig -@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM - select ARM_AMBA - select PINCTRL - select QCOM_SCM if SMP -+ select PCI_DOMAINS if PCI - help - Support for Qualcomm's devicetree based systems. - diff --git a/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch b/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch deleted file mode 100644 index 5380f2c7f9..0000000000 --- a/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch +++ /dev/null @@ -1,147 +0,0 @@ -From patchwork Fri Dec 8 09:42:19 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,01/12] ARM: Add Krait L2 register accessor functions -From: Sricharan R -X-Patchwork-Id: 10102101 -Message-Id: <1512726150-7204-2-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org, Mark Rutland , - Russell King , - Courtney Cavin -Date: Fri, 8 Dec 2017 15:12:19 +0530 - -From: Stephen Boyd - -Krait CPUs have a handful of L2 cache controller registers that -live behind a cp15 based indirection register. First you program -the indirection register (l2cpselr) to point the L2 'window' -register (l2cpdr) at what you want to read/write. Then you -read/write the 'window' register to do what you want. The -l2cpselr register is not banked per-cpu so we must lock around -accesses to it to prevent other CPUs from re-pointing l2cpdr -underneath us. - -Cc: Mark Rutland -Cc: Russell King -Cc: Courtney Cavin -Signed-off-by: Stephen Boyd ---- - arch/arm/common/Kconfig | 3 ++ - arch/arm/common/Makefile | 1 + - arch/arm/common/krait-l2-accessors.c | 58 +++++++++++++++++++++++++++++++ - arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++ - 4 files changed, 82 insertions(+) - create mode 100644 arch/arm/common/krait-l2-accessors.c - create mode 100644 arch/arm/include/asm/krait-l2-accessors.h - ---- a/arch/arm/common/Kconfig -+++ b/arch/arm/common/Kconfig -@@ -7,6 +7,9 @@ config DMABOUNCE - bool - select ZONE_DMA - -+config KRAIT_L2_ACCESSORS -+ bool -+ - config SHARP_LOCOMO - bool - ---- a/arch/arm/common/Makefile -+++ b/arch/arm/common/Makefile -@@ -7,6 +7,7 @@ obj-y += firmware.o - - obj-$(CONFIG_SA1111) += sa1111.o - obj-$(CONFIG_DMABOUNCE) += dmabounce.o -+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o - obj-$(CONFIG_SHARP_LOCOMO) += locomo.o - obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o - obj-$(CONFIG_SHARP_SCOOP) += scoop.o ---- /dev/null -+++ b/arch/arm/common/krait-l2-accessors.c -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+ -+static DEFINE_RAW_SPINLOCK(krait_l2_lock); -+ -+void krait_set_l2_indirect_reg(u32 addr, u32 val) -+{ -+ unsigned long flags; -+ -+ raw_spin_lock_irqsave(&krait_l2_lock, flags); -+ /* -+ * Select the L2 window by poking l2cpselr, then write to the window -+ * via l2cpdr. -+ */ -+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr)); -+ isb(); -+ asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val)); -+ isb(); -+ -+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags); -+} -+EXPORT_SYMBOL(krait_set_l2_indirect_reg); -+ -+u32 krait_get_l2_indirect_reg(u32 addr) -+{ -+ u32 val; -+ unsigned long flags; -+ -+ raw_spin_lock_irqsave(&krait_l2_lock, flags); -+ /* -+ * Select the L2 window by poking l2cpselr, then read from the window -+ * via l2cpdr. -+ */ -+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr)); -+ isb(); -+ asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val)); -+ -+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags); -+ -+ return val; -+} -+EXPORT_SYMBOL(krait_get_l2_indirect_reg); ---- /dev/null -+++ b/arch/arm/include/asm/krait-l2-accessors.h -@@ -0,0 +1,20 @@ -+/* -+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H -+#define __ASMARM_KRAIT_L2_ACCESSORS_H -+ -+extern void krait_set_l2_indirect_reg(u32 addr, u32 val); -+extern u32 krait_get_l2_indirect_reg(u32 addr); -+ -+#endif diff --git a/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch b/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch deleted file mode 100644 index e65ca02980..0000000000 --- a/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch +++ /dev/null @@ -1,195 +0,0 @@ -From patchwork Fri Dec 8 09:42:20 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,02/12] clk: mux: Split out register accessors for reuse -From: Sricharan R -X-Patchwork-Id: 10102103 -Message-Id: <1512726150-7204-3-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:20 +0530 - -From: Stephen Boyd - -We want to reuse the logic in clk-mux.c for other clock drivers -that don't use readl as register accessors. Fortunately, there -really isn't much to the mux code besides the table indirection -and quirk flags if you assume any bit shifting and masking has -been done already. Pull that logic out into reusable functions -that operate on an optional table and some flags so that other -drivers can use the same logic. - -Signed-off-by: Stephen Boyd ---- - drivers/clk/clk-mux.c | 75 +++++++++++++++++++++++++++----------------- - include/linux/clk-provider.h | 9 ++++-- - 2 files changed, 54 insertions(+), 30 deletions(-) - ---- a/drivers/clk/clk-mux.c -+++ b/drivers/clk/clk-mux.c -@@ -26,35 +26,24 @@ - * parent - parent is adjustable through clk_set_parent - */ - --static u8 clk_mux_get_parent(struct clk_hw *hw) -+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val, -+ unsigned int *table, unsigned long flags) - { -- struct clk_mux *mux = to_clk_mux(hw); - int num_parents = clk_hw_get_num_parents(hw); -- u32 val; -- -- /* -- * FIXME need a mux-specific flag to determine if val is bitwise or numeric -- * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1 -- * to 0x7 (index starts at one) -- * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so -- * val = 0x4 really means "bit 2, index starts at bit 0" -- */ -- val = clk_readl(mux->reg) >> mux->shift; -- val &= mux->mask; - -- if (mux->table) { -+ if (table) { - int i; - - for (i = 0; i < num_parents; i++) -- if (mux->table[i] == val) -+ if (table[i] == val) - return i; - return -EINVAL; - } - -- if (val && (mux->flags & CLK_MUX_INDEX_BIT)) -+ if (val && (flags & CLK_MUX_INDEX_BIT)) - val = ffs(val) - 1; - -- if (val && (mux->flags & CLK_MUX_INDEX_ONE)) -+ if (val && (flags & CLK_MUX_INDEX_ONE)) - val--; - - if (val >= num_parents) -@@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_ - - return val; - } -+EXPORT_SYMBOL_GPL(clk_mux_get_parent); - --static int clk_mux_set_parent(struct clk_hw *hw, u8 index) -+static u8 _clk_mux_get_parent(struct clk_hw *hw) - { - struct clk_mux *mux = to_clk_mux(hw); - u32 val; -- unsigned long flags = 0; - -- if (mux->table) { -- index = mux->table[index]; -+ /* -+ * FIXME need a mux-specific flag to determine if val is bitwise or -+ * numeric e.g. sys_clkin_ck's clksel field is 3 bits wide, -+ * but ranges from 0x1 to 0x7 (index starts at one) -+ * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so -+ * val = 0x4 really means "bit 2, index starts at bit 0" -+ */ -+ val = clk_readl(mux->reg) >> mux->shift; -+ val &= mux->mask; -+ -+ return clk_mux_get_parent(hw, val, mux->table, mux->flags); -+} -+ -+unsigned int clk_mux_reindex(u8 index, unsigned int *table, -+ unsigned long flags) -+{ -+ unsigned int val = index; -+ -+ if (table) { -+ val = table[val]; - } else { -- if (mux->flags & CLK_MUX_INDEX_BIT) -- index = 1 << index; -+ if (flags & CLK_MUX_INDEX_BIT) -+ val = 1 << index; - -- if (mux->flags & CLK_MUX_INDEX_ONE) -- index++; -+ if (flags & CLK_MUX_INDEX_ONE) -+ val++; - } - -+ return val; -+} -+EXPORT_SYMBOL_GPL(clk_mux_reindex); -+ -+static int clk_mux_set_parent(struct clk_hw *hw, u8 index) -+{ -+ struct clk_mux *mux = to_clk_mux(hw); -+ u32 val; -+ unsigned long flags = 0; -+ -+ index = clk_mux_reindex(index, mux->table, mux->flags); -+ - if (mux->lock) - spin_lock_irqsave(mux->lock, flags); - else -@@ -110,14 +129,14 @@ static int clk_mux_determine_rate(struct - } - - const struct clk_ops clk_mux_ops = { -- .get_parent = clk_mux_get_parent, -+ .get_parent = _clk_mux_get_parent, - .set_parent = clk_mux_set_parent, - .determine_rate = clk_mux_determine_rate, - }; - EXPORT_SYMBOL_GPL(clk_mux_ops); - - const struct clk_ops clk_mux_ro_ops = { -- .get_parent = clk_mux_get_parent, -+ .get_parent = _clk_mux_get_parent, - }; - EXPORT_SYMBOL_GPL(clk_mux_ro_ops); - -@@ -125,7 +144,7 @@ struct clk_hw *clk_hw_register_mux_table - const char * const *parent_names, u8 num_parents, - unsigned long flags, - void __iomem *reg, u8 shift, u32 mask, -- u8 clk_mux_flags, u32 *table, spinlock_t *lock) -+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock) - { - struct clk_mux *mux; - struct clk_hw *hw; ---- a/include/linux/clk-provider.h -+++ b/include/linux/clk-provider.h -@@ -468,7 +468,7 @@ void clk_hw_unregister_divider(struct cl - struct clk_mux { - struct clk_hw hw; - void __iomem *reg; -- u32 *table; -+ unsigned int *table; - u32 mask; - u8 shift; - u8 flags; -@@ -486,6 +486,11 @@ struct clk_mux { - extern const struct clk_ops clk_mux_ops; - extern const struct clk_ops clk_mux_ro_ops; - -+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val, -+ unsigned int *table, unsigned long flags); -+unsigned int clk_mux_reindex(u8 index, unsigned int *table, -+ unsigned long flags); -+ - struct clk *clk_register_mux(struct device *dev, const char *name, - const char * const *parent_names, u8 num_parents, - unsigned long flags, -@@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table - const char * const *parent_names, u8 num_parents, - unsigned long flags, - void __iomem *reg, u8 shift, u32 mask, -- u8 clk_mux_flags, u32 *table, spinlock_t *lock); -+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock); - - void clk_unregister_mux(struct clk *clk); - void clk_hw_unregister_mux(struct clk_hw *hw); diff --git a/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch b/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch deleted file mode 100644 index 45314e70d5..0000000000 --- a/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch +++ /dev/null @@ -1,352 +0,0 @@ -From patchwork Fri Dec 8 09:42:21 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) -From: Sricharan R -X-Patchwork-Id: 10102083 -Message-Id: <1512726150-7204-4-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:21 +0530 - -From: Stephen Boyd - -HFPLLs are the main frequency source for Krait CPU clocks. Add -support for changing the rate of these PLLs. - -Signed-off-by: Stephen Boyd ---- - drivers/clk/qcom/Makefile | 1 + - drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++ - drivers/clk/qcom/clk-hfpll.h | 54 +++++++++ - 3 files changed, 308 insertions(+) - create mode 100644 drivers/clk/qcom/clk-hfpll.c - create mode 100644 drivers/clk/qcom/clk-hfpll.h - ---- a/drivers/clk/qcom/Makefile -+++ b/drivers/clk/qcom/Makefile -@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o - clk-qcom-y += clk-branch.o - clk-qcom-y += clk-regmap-divider.o - clk-qcom-y += clk-regmap-mux.o -+clk-qcom-y += clk-hfpll.o - clk-qcom-y += reset.o - clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o - ---- /dev/null -+++ b/drivers/clk/qcom/clk-hfpll.c -@@ -0,0 +1,253 @@ -+/* -+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "clk-regmap.h" -+#include "clk-hfpll.h" -+ -+#define PLL_OUTCTRL BIT(0) -+#define PLL_BYPASSNL BIT(1) -+#define PLL_RESET_N BIT(2) -+ -+/* Initialize a HFPLL at a given rate and enable it. */ -+static void __clk_hfpll_init_once(struct clk_hw *hw) -+{ -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ struct hfpll_data const *hd = h->d; -+ struct regmap *regmap = h->clkr.regmap; -+ -+ if (likely(h->init_done)) -+ return; -+ -+ /* Configure PLL parameters for integer mode. */ -+ if (hd->config_val) -+ regmap_write(regmap, hd->config_reg, hd->config_val); -+ regmap_write(regmap, hd->m_reg, 0); -+ regmap_write(regmap, hd->n_reg, 1); -+ -+ if (hd->user_reg) { -+ u32 regval = hd->user_val; -+ unsigned long rate; -+ -+ rate = clk_hw_get_rate(hw); -+ -+ /* Pick the right VCO. */ -+ if (hd->user_vco_mask && rate > hd->low_vco_max_rate) -+ regval |= hd->user_vco_mask; -+ regmap_write(regmap, hd->user_reg, regval); -+ } -+ -+ if (hd->droop_reg) -+ regmap_write(regmap, hd->droop_reg, hd->droop_val); -+ -+ h->init_done = true; -+} -+ -+static void __clk_hfpll_enable(struct clk_hw *hw) -+{ -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ struct hfpll_data const *hd = h->d; -+ struct regmap *regmap = h->clkr.regmap; -+ u32 val; -+ -+ __clk_hfpll_init_once(hw); -+ -+ /* Disable PLL bypass mode. */ -+ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL); -+ -+ /* -+ * H/W requires a 5us delay between disabling the bypass and -+ * de-asserting the reset. Delay 10us just to be safe. -+ */ -+ udelay(10); -+ -+ /* De-assert active-low PLL reset. */ -+ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N); -+ -+ /* Wait for PLL to lock. */ -+ if (hd->status_reg) { -+ do { -+ regmap_read(regmap, hd->status_reg, &val); -+ } while (!(val & BIT(hd->lock_bit))); -+ } else { -+ udelay(60); -+ } -+ -+ /* Enable PLL output. */ -+ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL); -+} -+ -+/* Enable an already-configured HFPLL. */ -+static int clk_hfpll_enable(struct clk_hw *hw) -+{ -+ unsigned long flags; -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ struct hfpll_data const *hd = h->d; -+ struct regmap *regmap = h->clkr.regmap; -+ u32 mode; -+ -+ spin_lock_irqsave(&h->lock, flags); -+ regmap_read(regmap, hd->mode_reg, &mode); -+ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL))) -+ __clk_hfpll_enable(hw); -+ spin_unlock_irqrestore(&h->lock, flags); -+ -+ return 0; -+} -+ -+static void __clk_hfpll_disable(struct clk_hfpll *h) -+{ -+ struct hfpll_data const *hd = h->d; -+ struct regmap *regmap = h->clkr.regmap; -+ -+ /* -+ * Disable the PLL output, disable test mode, enable the bypass mode, -+ * and assert the reset. -+ */ -+ regmap_update_bits(regmap, hd->mode_reg, -+ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0); -+} -+ -+static void clk_hfpll_disable(struct clk_hw *hw) -+{ -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&h->lock, flags); -+ __clk_hfpll_disable(h); -+ spin_unlock_irqrestore(&h->lock, flags); -+} -+ -+static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ struct hfpll_data const *hd = h->d; -+ unsigned long rrate; -+ -+ rate = clamp(rate, hd->min_rate, hd->max_rate); -+ -+ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate; -+ if (rrate > hd->max_rate) -+ rrate -= *parent_rate; -+ -+ return rrate; -+} -+ -+/* -+ * For optimization reasons, assumes no downstream clocks are actively using -+ * it. -+ */ -+static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ struct hfpll_data const *hd = h->d; -+ struct regmap *regmap = h->clkr.regmap; -+ unsigned long flags; -+ u32 l_val, val; -+ bool enabled; -+ -+ l_val = rate / parent_rate; -+ -+ spin_lock_irqsave(&h->lock, flags); -+ -+ enabled = __clk_is_enabled(hw->clk); -+ if (enabled) -+ __clk_hfpll_disable(h); -+ -+ /* Pick the right VCO. */ -+ if (hd->user_reg && hd->user_vco_mask) { -+ regmap_read(regmap, hd->user_reg, &val); -+ if (rate <= hd->low_vco_max_rate) -+ val &= ~hd->user_vco_mask; -+ else -+ val |= hd->user_vco_mask; -+ regmap_write(regmap, hd->user_reg, val); -+ } -+ -+ regmap_write(regmap, hd->l_reg, l_val); -+ -+ if (enabled) -+ __clk_hfpll_enable(hw); -+ -+ spin_unlock_irqrestore(&h->lock, flags); -+ -+ return 0; -+} -+ -+static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ struct hfpll_data const *hd = h->d; -+ struct regmap *regmap = h->clkr.regmap; -+ u32 l_val; -+ -+ regmap_read(regmap, hd->l_reg, &l_val); -+ -+ return l_val * parent_rate; -+} -+ -+static void clk_hfpll_init(struct clk_hw *hw) -+{ -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ struct hfpll_data const *hd = h->d; -+ struct regmap *regmap = h->clkr.regmap; -+ u32 mode, status; -+ -+ regmap_read(regmap, hd->mode_reg, &mode); -+ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) { -+ __clk_hfpll_init_once(hw); -+ return; -+ } -+ -+ if (hd->status_reg) { -+ regmap_read(regmap, hd->status_reg, &status); -+ if (!(status & BIT(hd->lock_bit))) { -+ WARN(1, "HFPLL %s is ON, but not locked!\n", -+ __clk_get_name(hw->clk)); -+ clk_hfpll_disable(hw); -+ __clk_hfpll_init_once(hw); -+ } -+ } -+} -+ -+static int hfpll_is_enabled(struct clk_hw *hw) -+{ -+ struct clk_hfpll *h = to_clk_hfpll(hw); -+ struct hfpll_data const *hd = h->d; -+ struct regmap *regmap = h->clkr.regmap; -+ u32 mode; -+ -+ regmap_read(regmap, hd->mode_reg, &mode); -+ mode &= 0x7; -+ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL); -+} -+ -+const struct clk_ops clk_ops_hfpll = { -+ .enable = clk_hfpll_enable, -+ .disable = clk_hfpll_disable, -+ .is_enabled = hfpll_is_enabled, -+ .round_rate = clk_hfpll_round_rate, -+ .set_rate = clk_hfpll_set_rate, -+ .recalc_rate = clk_hfpll_recalc_rate, -+ .init = clk_hfpll_init, -+}; -+EXPORT_SYMBOL_GPL(clk_ops_hfpll); ---- /dev/null -+++ b/drivers/clk/qcom/clk-hfpll.h -@@ -0,0 +1,54 @@ -+/* -+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#ifndef __QCOM_CLK_HFPLL_H__ -+#define __QCOM_CLK_HFPLL_H__ -+ -+#include -+#include -+#include "clk-regmap.h" -+ -+struct hfpll_data { -+ u32 mode_reg; -+ u32 l_reg; -+ u32 m_reg; -+ u32 n_reg; -+ u32 user_reg; -+ u32 droop_reg; -+ u32 config_reg; -+ u32 status_reg; -+ u8 lock_bit; -+ -+ u32 droop_val; -+ u32 config_val; -+ u32 user_val; -+ u32 user_vco_mask; -+ unsigned long low_vco_max_rate; -+ -+ unsigned long min_rate; -+ unsigned long max_rate; -+}; -+ -+struct clk_hfpll { -+ struct hfpll_data const *d; -+ int init_done; -+ -+ struct clk_regmap clkr; -+ spinlock_t lock; -+}; -+ -+#define to_clk_hfpll(_hw) \ -+ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr) -+ -+extern const struct clk_ops clk_ops_hfpll; -+ -+#endif diff --git a/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch b/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch deleted file mode 100644 index 884d564ae7..0000000000 --- a/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch +++ /dev/null @@ -1,206 +0,0 @@ -From patchwork Fri Dec 8 09:42:22 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,04/12] clk: qcom: Add HFPLL driver -From: Sricharan R -X-Patchwork-Id: 10102079 -Message-Id: <1512726150-7204-5-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:22 +0530 - -From: Stephen Boyd - -On some devices (MSM8974 for example), the HFPLLs are -instantiated within the Krait processor subsystem as separate -register regions. Add a driver for these PLLs so that we can -provide HFPLL clocks for use by the system. - -Cc: -Signed-off-by: Stephen Boyd ---- - .../devicetree/bindings/clock/qcom,hfpll.txt | 40 ++++++++ - drivers/clk/qcom/Kconfig | 8 ++ - drivers/clk/qcom/Makefile | 1 + - drivers/clk/qcom/hfpll.c | 106 +++++++++++++++++++++ - 4 files changed, 155 insertions(+) - create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt - create mode 100644 drivers/clk/qcom/hfpll.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt -@@ -0,0 +1,40 @@ -+High-Frequency PLL (HFPLL) -+ -+PROPERTIES -+ -+- compatible: -+ Usage: required -+ Value type: -+ Definition: must be "qcom,hfpll" -+ -+- reg: -+ Usage: required -+ Value type: -+ Definition: address and size of HPLL registers. An optional second -+ element specifies the address and size of the alias -+ register region. -+ -+- clock-output-names: -+ Usage: required -+ Value type: -+ Definition: Name of the PLL. Typically hfpllX where X is a CPU number -+ starting at 0. Otherwise hfpll_Y where Y is more specific -+ such as "l2". -+ -+Example: -+ -+1) An HFPLL for the L2 cache. -+ -+ clock-controller@f9016000 { -+ compatible = "qcom,hfpll"; -+ reg = <0xf9016000 0x30>; -+ clock-output-names = "hfpll_l2"; -+ }; -+ -+2) An HFPLL for CPU0. This HFPLL has the alias register region. -+ -+ clock-controller@f908a000 { -+ compatible = "qcom,hfpll"; -+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>; -+ clock-output-names = "hfpll0"; -+ }; ---- a/drivers/clk/qcom/Kconfig -+++ b/drivers/clk/qcom/Kconfig -@@ -196,3 +196,11 @@ config MSM_MMCC_8996 - Support for the multimedia clock controller on msm8996 devices. - Say Y if you want to support multimedia devices such as display, - graphics, video encode/decode, camera, etc. -+ -+config QCOM_HFPLL -+ tristate "High-Frequency PLL (HFPLL) Clock Controller" -+ depends on COMMON_CLK_QCOM -+ help -+ Support for the high-frequency PLLs present on Qualcomm devices. -+ Say Y if you want to support CPU frequency scaling on devices -+ such as MSM8974, APQ8084, etc. ---- a/drivers/clk/qcom/Makefile -+++ b/drivers/clk/qcom/Makefile -@@ -35,3 +35,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8 - obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o - obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o - obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o -+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o ---- /dev/null -+++ b/drivers/clk/qcom/hfpll.c -@@ -0,0 +1,106 @@ -+/* -+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "clk-regmap.h" -+#include "clk-hfpll.h" -+ -+static const struct hfpll_data hdata = { -+ .mode_reg = 0x00, -+ .l_reg = 0x04, -+ .m_reg = 0x08, -+ .n_reg = 0x0c, -+ .user_reg = 0x10, -+ .config_reg = 0x14, -+ .config_val = 0x430405d, -+ .status_reg = 0x1c, -+ .lock_bit = 16, -+ -+ .user_val = 0x8, -+ .user_vco_mask = 0x100000, -+ .low_vco_max_rate = 1248000000, -+ .min_rate = 537600000UL, -+ .max_rate = 2900000000UL, -+}; -+ -+static const struct of_device_id qcom_hfpll_match_table[] = { -+ { .compatible = "qcom,hfpll" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table); -+ -+static const struct regmap_config hfpll_regmap_config = { -+ .reg_bits = 32, -+ .reg_stride = 4, -+ .val_bits = 32, -+ .max_register = 0x30, -+ .fast_io = true, -+}; -+ -+static int qcom_hfpll_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct device *dev = &pdev->dev; -+ void __iomem *base; -+ struct regmap *regmap; -+ struct clk_hfpll *h; -+ struct clk_init_data init = { -+ .parent_names = (const char *[]){ "xo" }, -+ .num_parents = 1, -+ .ops = &clk_ops_hfpll, -+ }; -+ -+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL); -+ if (!h) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config); -+ if (IS_ERR(regmap)) -+ return PTR_ERR(regmap); -+ -+ if (of_property_read_string_index(dev->of_node, "clock-output-names", -+ 0, &init.name)) -+ return -ENODEV; -+ -+ h->d = &hdata; -+ h->clkr.hw.init = &init; -+ spin_lock_init(&h->lock); -+ -+ return devm_clk_register_regmap(&pdev->dev, &h->clkr); -+} -+ -+static struct platform_driver qcom_hfpll_driver = { -+ .probe = qcom_hfpll_probe, -+ .driver = { -+ .name = "qcom-hfpll", -+ .of_match_table = qcom_hfpll_match_table, -+ }, -+}; -+module_platform_driver(qcom_hfpll_driver); -+ -+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:qcom-hfpll"); diff --git a/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch b/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch deleted file mode 100644 index c3af0fa55c..0000000000 --- a/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch +++ /dev/null @@ -1,129 +0,0 @@ -From patchwork Fri Dec 8 09:42:24 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,06/12] clk: qcom: Add IPQ806X's HFPLLs -From: Sricharan R -X-Patchwork-Id: 10102047 -Message-Id: <1512726150-7204-7-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:24 +0530 - -From: Stephen Boyd - -Describe the HFPLLs present on IPQ806X devices. - -Signed-off-by: Stephen Boyd ---- - drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 82 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -30,6 +30,7 @@ - #include "clk-pll.h" - #include "clk-rcg.h" - #include "clk-branch.h" -+#include "clk-hfpll.h" - #include "reset.h" - - static struct clk_pll pll0 = { -@@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = { - }, - }; - -+static struct hfpll_data hfpll0_data = { -+ .mode_reg = 0x3200, -+ .l_reg = 0x3208, -+ .m_reg = 0x320c, -+ .n_reg = 0x3210, -+ .config_reg = 0x3204, -+ .status_reg = 0x321c, -+ .config_val = 0x7845c665, -+ .droop_reg = 0x3214, -+ .droop_val = 0x0108c000, -+ .min_rate = 600000000UL, -+ .max_rate = 1800000000UL, -+}; -+ -+static struct clk_hfpll hfpll0 = { -+ .d = &hfpll0_data, -+ .clkr.hw.init = &(struct clk_init_data){ -+ .parent_names = (const char *[]){ "pxo" }, -+ .num_parents = 1, -+ .name = "hfpll0", -+ .ops = &clk_ops_hfpll, -+ .flags = CLK_IGNORE_UNUSED, -+ }, -+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock), -+}; -+ -+static struct hfpll_data hfpll1_data = { -+ .mode_reg = 0x3240, -+ .l_reg = 0x3248, -+ .m_reg = 0x324c, -+ .n_reg = 0x3250, -+ .config_reg = 0x3244, -+ .status_reg = 0x325c, -+ .config_val = 0x7845c665, -+ .droop_reg = 0x3314, -+ .droop_val = 0x0108c000, -+ .min_rate = 600000000UL, -+ .max_rate = 1800000000UL, -+}; -+ -+static struct clk_hfpll hfpll1 = { -+ .d = &hfpll1_data, -+ .clkr.hw.init = &(struct clk_init_data){ -+ .parent_names = (const char *[]){ "pxo" }, -+ .num_parents = 1, -+ .name = "hfpll1", -+ .ops = &clk_ops_hfpll, -+ .flags = CLK_IGNORE_UNUSED, -+ }, -+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock), -+}; -+ -+static struct hfpll_data hfpll_l2_data = { -+ .mode_reg = 0x3300, -+ .l_reg = 0x3308, -+ .m_reg = 0x330c, -+ .n_reg = 0x3310, -+ .config_reg = 0x3304, -+ .status_reg = 0x331c, -+ .config_val = 0x7845c665, -+ .droop_reg = 0x3314, -+ .droop_val = 0x0108c000, -+ .min_rate = 600000000UL, -+ .max_rate = 1800000000UL, -+}; -+ -+static struct clk_hfpll hfpll_l2 = { -+ .d = &hfpll_l2_data, -+ .clkr.hw.init = &(struct clk_init_data){ -+ .parent_names = (const char *[]){ "pxo" }, -+ .num_parents = 1, -+ .name = "hfpll_l2", -+ .ops = &clk_ops_hfpll, -+ .flags = CLK_IGNORE_UNUSED, -+ }, -+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock), -+}; -+ - static struct clk_pll pll14 = { - .l_reg = 0x31c4, - .m_reg = 0x31c8, -@@ -2801,6 +2880,9 @@ static struct clk_regmap *gcc_ipq806x_cl - [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr, - [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr, - [NSSTCM_CLK] = &nss_tcm_clk.clkr, -+ [PLL9] = &hfpll0.clkr, -+ [PLL10] = &hfpll1.clkr, -+ [PLL12] = &hfpll_l2.clkr, - }; - - static const struct qcom_reset_map gcc_ipq806x_resets[] = { diff --git a/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch b/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch deleted file mode 100644 index 5896ab3a26..0000000000 --- a/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch +++ /dev/null @@ -1,241 +0,0 @@ -From patchwork Fri Dec 8 09:42:25 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,07/12] clk: qcom: Add support for Krait clocks -From: Sricharan R -X-Patchwork-Id: 10102051 -Message-Id: <1512726150-7204-8-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:25 +0530 - -From: Stephen Boyd - -The Krait clocks are made up of a series of muxes and a divider -that choose between a fixed rate clock and dedicated HFPLLs for -each CPU. Instead of using mmio accesses to remux parents, the -Krait implementation exposes the remux control via cp15 -registers. Support these clocks. - -Signed-off-by: Stephen Boyd ---- - drivers/clk/qcom/Kconfig | 4 ++ - drivers/clk/qcom/Makefile | 1 + - drivers/clk/qcom/clk-krait.c | 134 +++++++++++++++++++++++++++++++++++++++++++ - drivers/clk/qcom/clk-krait.h | 48 ++++++++++++++++ - 4 files changed, 187 insertions(+) - create mode 100644 drivers/clk/qcom/clk-krait.c - create mode 100644 drivers/clk/qcom/clk-krait.h - ---- a/drivers/clk/qcom/Kconfig -+++ b/drivers/clk/qcom/Kconfig -@@ -204,3 +204,7 @@ config QCOM_HFPLL - Support for the high-frequency PLLs present on Qualcomm devices. - Say Y if you want to support CPU frequency scaling on devices - such as MSM8974, APQ8084, etc. -+ -+config KRAIT_CLOCKS -+ bool -+ select KRAIT_L2_ACCESSORS ---- a/drivers/clk/qcom/Makefile -+++ b/drivers/clk/qcom/Makefile -@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o - clk-qcom-y += clk-branch.o - clk-qcom-y += clk-regmap-divider.o - clk-qcom-y += clk-regmap-mux.o -+clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o - clk-qcom-y += clk-hfpll.o - clk-qcom-y += reset.o - clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o ---- /dev/null -+++ b/drivers/clk/qcom/clk-krait.c -@@ -0,0 +1,134 @@ -+/* -+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "clk-krait.h" -+ -+/* Secondary and primary muxes share the same cp15 register */ -+static DEFINE_SPINLOCK(krait_clock_reg_lock); -+ -+#define LPL_SHIFT 8 -+static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel) -+{ -+ unsigned long flags; -+ u32 regval; -+ -+ spin_lock_irqsave(&krait_clock_reg_lock, flags); -+ regval = krait_get_l2_indirect_reg(mux->offset); -+ regval &= ~(mux->mask << mux->shift); -+ regval |= (sel & mux->mask) << mux->shift; -+ if (mux->lpl) { -+ regval &= ~(mux->mask << (mux->shift + LPL_SHIFT)); -+ regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT); -+ } -+ krait_set_l2_indirect_reg(mux->offset, regval); -+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags); -+ -+ /* Wait for switch to complete. */ -+ mb(); -+ udelay(1); -+} -+ -+static int krait_mux_set_parent(struct clk_hw *hw, u8 index) -+{ -+ struct krait_mux_clk *mux = to_krait_mux_clk(hw); -+ u32 sel; -+ -+ sel = clk_mux_reindex(index, mux->parent_map, 0); -+ mux->en_mask = sel; -+ /* Don't touch mux if CPU is off as it won't work */ -+ if (__clk_is_enabled(hw->clk)) -+ __krait_mux_set_sel(mux, sel); -+ -+ return 0; -+} -+ -+static u8 krait_mux_get_parent(struct clk_hw *hw) -+{ -+ struct krait_mux_clk *mux = to_krait_mux_clk(hw); -+ u32 sel; -+ -+ sel = krait_get_l2_indirect_reg(mux->offset); -+ sel >>= mux->shift; -+ sel &= mux->mask; -+ mux->en_mask = sel; -+ -+ return clk_mux_get_parent(hw, sel, mux->parent_map, 0); -+} -+ -+const struct clk_ops krait_mux_clk_ops = { -+ .set_parent = krait_mux_set_parent, -+ .get_parent = krait_mux_get_parent, -+ .determine_rate = __clk_mux_determine_rate_closest, -+}; -+EXPORT_SYMBOL_GPL(krait_mux_clk_ops); -+ -+/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */ -+static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2); -+ return DIV_ROUND_UP(*parent_rate, 2); -+} -+ -+static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct krait_div2_clk *d = to_krait_div2_clk(hw); -+ unsigned long flags; -+ u32 val; -+ u32 mask = BIT(d->width) - 1; -+ -+ if (d->lpl) -+ mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift; -+ -+ spin_lock_irqsave(&krait_clock_reg_lock, flags); -+ val = krait_get_l2_indirect_reg(d->offset); -+ val &= ~mask; -+ krait_set_l2_indirect_reg(d->offset, val); -+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags); -+ -+ return 0; -+} -+ -+static unsigned long -+krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -+{ -+ struct krait_div2_clk *d = to_krait_div2_clk(hw); -+ u32 mask = BIT(d->width) - 1; -+ u32 div; -+ -+ div = krait_get_l2_indirect_reg(d->offset); -+ div >>= d->shift; -+ div &= mask; -+ div = (div + 1) * 2; -+ -+ return DIV_ROUND_UP(parent_rate, div); -+} -+ -+const struct clk_ops krait_div2_clk_ops = { -+ .round_rate = krait_div2_round_rate, -+ .set_rate = krait_div2_set_rate, -+ .recalc_rate = krait_div2_recalc_rate, -+}; -+EXPORT_SYMBOL_GPL(krait_div2_clk_ops); ---- /dev/null -+++ b/drivers/clk/qcom/clk-krait.h -@@ -0,0 +1,48 @@ -+/* -+ * Copyright (c) 2013, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef __QCOM_CLK_KRAIT_H -+#define __QCOM_CLK_KRAIT_H -+ -+#include -+ -+struct krait_mux_clk { -+ unsigned int *parent_map; -+ u32 offset; -+ u32 mask; -+ u32 shift; -+ u32 en_mask; -+ bool lpl; -+ -+ struct clk_hw hw; -+ struct notifier_block clk_nb; -+}; -+ -+#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw) -+ -+extern const struct clk_ops krait_mux_clk_ops; -+ -+struct krait_div2_clk { -+ u32 offset; -+ u8 width; -+ u32 shift; -+ bool lpl; -+ -+ struct clk_hw hw; -+}; -+ -+#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw) -+ -+extern const struct clk_ops krait_div2_clk_ops; -+ -+#endif diff --git a/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch b/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch deleted file mode 100644 index 93c86ebb69..0000000000 --- a/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch +++ /dev/null @@ -1,209 +0,0 @@ -From patchwork Fri Dec 8 09:42:26 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,08/12] clk: qcom: Add KPSS ACC/GCC driver -From: Sricharan R -X-Patchwork-Id: 10102023 -Message-Id: <1512726150-7204-9-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:26 +0530 - -From: Stephen Boyd - -The ACC and GCC regions present in KPSSv1 contain registers to -control clocks and power to each Krait CPU and L2. For CPUfreq -purposes probe these devices and expose a mux clock that chooses -between PXO and PLL8. - -Cc: -Signed-off-by: Stephen Boyd ---- - .../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 7 ++ - .../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 28 +++++++ - drivers/clk/qcom/Kconfig | 8 ++ - drivers/clk/qcom/Makefile | 1 + - drivers/clk/qcom/kpss-xcc.c | 96 ++++++++++++++++++++++ - 5 files changed, 140 insertions(+) - create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt - create mode 100644 drivers/clk/qcom/kpss-xcc.c - ---- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt -+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt -@@ -21,10 +21,17 @@ PROPERTIES - the register region. An optional second element specifies - the base address and size of the alias register region. - -+- clock-output-names: -+ Usage: optional -+ Value type: -+ Definition: Name of the output clock. Typically acpuX_aux where X is a -+ CPU number starting at 0. -+ - Example: - - clock-controller@2088000 { - compatible = "qcom,kpss-acc-v2"; - reg = <0x02088000 0x1000>, - <0x02008000 0x1000>; -+ clock-output-names = "acpu0_aux"; - }; ---- /dev/null -+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt -@@ -0,0 +1,28 @@ -+Krait Processor Sub-system (KPSS) Global Clock Controller (GCC) -+ -+PROPERTIES -+ -+- compatible: -+ Usage: required -+ Value type: -+ Definition: should be one of: -+ "qcom,kpss-gcc" -+ -+- reg: -+ Usage: required -+ Value type: -+ Definition: base address and size of the register region -+ -+- clock-output-names: -+ Usage: required -+ Value type: -+ Definition: Name of the output clock. Typically acpu_l2_aux indicating -+ an L2 cache auxiliary clock. -+ -+Example: -+ -+ l2cc: clock-controller@2011000 { -+ compatible = "qcom,kpss-gcc"; -+ reg = <0x2011000 0x1000>; -+ clock-output-names = "acpu_l2_aux"; -+ }; ---- a/drivers/clk/qcom/Kconfig -+++ b/drivers/clk/qcom/Kconfig -@@ -205,6 +205,14 @@ config QCOM_HFPLL - Say Y if you want to support CPU frequency scaling on devices - such as MSM8974, APQ8084, etc. - -+config KPSS_XCC -+ tristate "KPSS Clock Controller" -+ depends on COMMON_CLK_QCOM -+ help -+ Support for the Krait ACC and GCC clock controllers. Say Y -+ if you want to support CPU frequency scaling on devices such -+ as MSM8960, APQ8064, etc. -+ - config KRAIT_CLOCKS - bool - select KRAIT_L2_ACCESSORS ---- a/drivers/clk/qcom/Makefile -+++ b/drivers/clk/qcom/Makefile -@@ -36,4 +36,5 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8 - obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o - obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o - obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o -+obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o - obj-$(CONFIG_QCOM_HFPLL) += hfpll.o ---- /dev/null -+++ b/drivers/clk/qcom/kpss-xcc.c -@@ -0,0 +1,96 @@ -+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static const char *aux_parents[] = { -+ "pll8_vote", -+ "pxo", -+}; -+ -+static unsigned int aux_parent_map[] = { -+ 3, -+ 0, -+}; -+ -+static const struct of_device_id kpss_xcc_match_table[] = { -+ { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL }, -+ { .compatible = "qcom,kpss-gcc" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, kpss_xcc_match_table); -+ -+static int kpss_xcc_driver_probe(struct platform_device *pdev) -+{ -+ const struct of_device_id *id; -+ struct clk *clk; -+ struct resource *res; -+ void __iomem *base; -+ const char *name; -+ -+ id = of_match_device(kpss_xcc_match_table, &pdev->dev); -+ if (!id) -+ return -ENODEV; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ if (id->data) { -+ if (of_property_read_string_index(pdev->dev.of_node, -+ "clock-output-names", -+ 0, &name)) -+ return -ENODEV; -+ base += 0x14; -+ } else { -+ name = "acpu_l2_aux"; -+ base += 0x28; -+ } -+ -+ clk = clk_register_mux_table(&pdev->dev, name, aux_parents, -+ ARRAY_SIZE(aux_parents), 0, base, 0, 0x3, -+ 0, aux_parent_map, NULL); -+ -+ platform_set_drvdata(pdev, clk); -+ -+ return PTR_ERR_OR_ZERO(clk); -+} -+ -+static int kpss_xcc_driver_remove(struct platform_device *pdev) -+{ -+ clk_unregister_mux(platform_get_drvdata(pdev)); -+ return 0; -+} -+ -+static struct platform_driver kpss_xcc_driver = { -+ .probe = kpss_xcc_driver_probe, -+ .remove = kpss_xcc_driver_remove, -+ .driver = { -+ .name = "kpss-xcc", -+ .of_match_table = kpss_xcc_match_table, -+ }, -+}; -+module_platform_driver(kpss_xcc_driver); -+ -+MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:kpss-xcc"); diff --git a/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch b/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch deleted file mode 100644 index dcc10ec79c..0000000000 --- a/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch +++ /dev/null @@ -1,436 +0,0 @@ -From patchwork Fri Dec 8 09:42:27 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,09/12] clk: qcom: Add Krait clock controller driver -From: Sricharan R -X-Patchwork-Id: 10102061 -Message-Id: <1512726150-7204-10-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:27 +0530 - -From: Stephen Boyd - -The Krait CPU clocks are made up of a primary mux and secondary -mux for each CPU and the L2, controlled via cp15 accessors. For -Kraits within KPSSv1 each secondary mux accepts a different aux -source, but on KPSSv2 each secondary mux accepts the same aux -source. - -Cc: -Signed-off-by: Stephen Boyd ---- - .../devicetree/bindings/clock/qcom,krait-cc.txt | 22 ++ - drivers/clk/qcom/Kconfig | 8 + - drivers/clk/qcom/Makefile | 1 + - drivers/clk/qcom/krait-cc.c | 350 +++++++++++++++++++++ - 4 files changed, 381 insertions(+) - create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt - create mode 100644 drivers/clk/qcom/krait-cc.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt -@@ -0,0 +1,22 @@ -+Krait Clock Controller -+ -+PROPERTIES -+ -+- compatible: -+ Usage: required -+ Value type: -+ Definition: must be one of: -+ "qcom,krait-cc-v1" -+ "qcom,krait-cc-v2" -+ -+- #clock-cells: -+ Usage: required -+ Value type: -+ Definition: must be 1 -+ -+Example: -+ -+ kraitcc: clock-controller { -+ compatible = "qcom,krait-cc-v1"; -+ #clock-cells = <1>; -+ }; ---- a/drivers/clk/qcom/Kconfig -+++ b/drivers/clk/qcom/Kconfig -@@ -213,6 +213,14 @@ config KPSS_XCC - if you want to support CPU frequency scaling on devices such - as MSM8960, APQ8064, etc. - -+config KRAITCC -+ tristate "Krait Clock Controller" -+ depends on COMMON_CLK_QCOM && ARM -+ select KRAIT_CLOCKS -+ help -+ Support for the Krait CPU clocks on Qualcomm devices. -+ Say Y if you want to support CPU frequency scaling. -+ - config KRAIT_CLOCKS - bool - select KRAIT_L2_ACCESSORS ---- a/drivers/clk/qcom/Makefile -+++ b/drivers/clk/qcom/Makefile -@@ -38,3 +38,4 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o - obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o - obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o - obj-$(CONFIG_QCOM_HFPLL) += hfpll.o -+obj-$(CONFIG_KRAITCC) += krait-cc.o ---- /dev/null -+++ b/drivers/clk/qcom/krait-cc.c -@@ -0,0 +1,350 @@ -+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "clk-krait.h" -+ -+static unsigned int sec_mux_map[] = { -+ 2, -+ 0, -+}; -+ -+static unsigned int pri_mux_map[] = { -+ 1, -+ 2, -+ 0, -+}; -+ -+static int -+krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) -+{ -+ struct krait_div2_clk *div; -+ struct clk_init_data init = { -+ .num_parents = 1, -+ .ops = &krait_div2_clk_ops, -+ .flags = CLK_SET_RATE_PARENT, -+ }; -+ const char *p_names[1]; -+ struct clk *clk; -+ -+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); -+ if (!div) -+ return -ENOMEM; -+ -+ div->width = 2; -+ div->shift = 6; -+ div->lpl = id >= 0; -+ div->offset = offset; -+ div->hw.init = &init; -+ -+ init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s); -+ if (!init.name) -+ return -ENOMEM; -+ -+ init.parent_names = p_names; -+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); -+ if (!p_names[0]) { -+ kfree(init.name); -+ return -ENOMEM; -+ } -+ -+ clk = devm_clk_register(dev, &div->hw); -+ kfree(p_names[0]); -+ kfree(init.name); -+ -+ return PTR_ERR_OR_ZERO(clk); -+} -+ -+static int -+krait_add_sec_mux(struct device *dev, int id, const char *s, -+ unsigned int offset, bool unique_aux) -+{ -+ struct krait_mux_clk *mux; -+ static const char *sec_mux_list[] = { -+ "acpu_aux", -+ "qsb", -+ }; -+ struct clk_init_data init = { -+ .parent_names = sec_mux_list, -+ .num_parents = ARRAY_SIZE(sec_mux_list), -+ .ops = &krait_mux_clk_ops, -+ .flags = CLK_SET_RATE_PARENT, -+ }; -+ struct clk *clk; -+ -+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); -+ if (!mux) -+ return -ENOMEM; -+ -+ mux->offset = offset; -+ mux->lpl = id >= 0; -+ mux->mask = 0x3; -+ mux->shift = 2; -+ mux->parent_map = sec_mux_map; -+ mux->hw.init = &init; -+ -+ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); -+ if (!init.name) -+ return -ENOMEM; -+ -+ if (unique_aux) { -+ sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); -+ if (!sec_mux_list[0]) { -+ clk = ERR_PTR(-ENOMEM); -+ goto err_aux; -+ } -+ } -+ -+ clk = devm_clk_register(dev, &mux->hw); -+ -+ if (unique_aux) -+ kfree(sec_mux_list[0]); -+err_aux: -+ kfree(init.name); -+ return PTR_ERR_OR_ZERO(clk); -+} -+ -+static struct clk * -+krait_add_pri_mux(struct device *dev, int id, const char *s, -+ unsigned int offset) -+{ -+ struct krait_mux_clk *mux; -+ const char *p_names[3]; -+ struct clk_init_data init = { -+ .parent_names = p_names, -+ .num_parents = ARRAY_SIZE(p_names), -+ .ops = &krait_mux_clk_ops, -+ .flags = CLK_SET_RATE_PARENT, -+ }; -+ struct clk *clk; -+ -+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); -+ if (!mux) -+ return ERR_PTR(-ENOMEM); -+ -+ mux->mask = 0x3; -+ mux->shift = 0; -+ mux->offset = offset; -+ mux->lpl = id >= 0; -+ mux->parent_map = pri_mux_map; -+ mux->hw.init = &init; -+ -+ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s); -+ if (!init.name) -+ return ERR_PTR(-ENOMEM); -+ -+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); -+ if (!p_names[0]) { -+ clk = ERR_PTR(-ENOMEM); -+ goto err_p0; -+ } -+ -+ p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s); -+ if (!p_names[1]) { -+ clk = ERR_PTR(-ENOMEM); -+ goto err_p1; -+ } -+ -+ p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); -+ if (!p_names[2]) { -+ clk = ERR_PTR(-ENOMEM); -+ goto err_p2; -+ } -+ -+ clk = devm_clk_register(dev, &mux->hw); -+ -+ kfree(p_names[2]); -+err_p2: -+ kfree(p_names[1]); -+err_p1: -+ kfree(p_names[0]); -+err_p0: -+ kfree(init.name); -+ return clk; -+} -+ -+/* id < 0 for L2, otherwise id == physical CPU number */ -+static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) -+{ -+ int ret; -+ unsigned int offset; -+ void *p = NULL; -+ const char *s; -+ struct clk *clk; -+ -+ if (id >= 0) { -+ offset = 0x4501 + (0x1000 * id); -+ s = p = kasprintf(GFP_KERNEL, "%d", id); -+ if (!s) -+ return ERR_PTR(-ENOMEM); -+ } else { -+ offset = 0x500; -+ s = "_l2"; -+ } -+ -+ ret = krait_add_div(dev, id, s, offset); -+ if (ret) { -+ clk = ERR_PTR(ret); -+ goto err; -+ } -+ -+ ret = krait_add_sec_mux(dev, id, s, offset, unique_aux); -+ if (ret) { -+ clk = ERR_PTR(ret); -+ goto err; -+ } -+ -+ clk = krait_add_pri_mux(dev, id, s, offset); -+err: -+ kfree(p); -+ return clk; -+} -+ -+static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data) -+{ -+ unsigned int idx = clkspec->args[0]; -+ struct clk **clks = data; -+ -+ if (idx >= 5) { -+ pr_err("%s: invalid clock index %d\n", __func__, idx); -+ return ERR_PTR(-EINVAL); -+ } -+ -+ return clks[idx] ? : ERR_PTR(-ENODEV); -+} -+ -+static const struct of_device_id krait_cc_match_table[] = { -+ { .compatible = "qcom,krait-cc-v1", (void *)1UL }, -+ { .compatible = "qcom,krait-cc-v2" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, krait_cc_match_table); -+ -+static int krait_cc_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ const struct of_device_id *id; -+ unsigned long cur_rate, aux_rate; -+ int cpu; -+ struct clk *clk; -+ struct clk **clks; -+ struct clk *l2_pri_mux_clk; -+ -+ id = of_match_device(krait_cc_match_table, dev); -+ if (!id) -+ return -ENODEV; -+ -+ /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */ -+ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); -+ if (IS_ERR(clk)) -+ return PTR_ERR(clk); -+ -+ if (!id->data) { -+ clk = clk_register_fixed_factor(dev, "acpu_aux", -+ "gpll0_vote", 0, 1, 2); -+ if (IS_ERR(clk)) -+ return PTR_ERR(clk); -+ } -+ -+ /* Krait configurations have at most 4 CPUs and one L2 */ -+ clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL); -+ if (!clks) -+ return -ENOMEM; -+ -+ for_each_possible_cpu(cpu) { -+ clk = krait_add_clks(dev, cpu, id->data); -+ if (IS_ERR(clk)) -+ return PTR_ERR(clk); -+ clks[cpu] = clk; -+ } -+ -+ l2_pri_mux_clk = krait_add_clks(dev, -1, id->data); -+ if (IS_ERR(l2_pri_mux_clk)) -+ return PTR_ERR(l2_pri_mux_clk); -+ clks[4] = l2_pri_mux_clk; -+ -+ /* -+ * We don't want the CPU or L2 clocks to be turned off at late init -+ * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the -+ * refcount of these clocks. Any cpufreq/hotplug manager can assume -+ * that the clocks have already been prepared and enabled by the time -+ * they take over. -+ */ -+ for_each_online_cpu(cpu) { -+ clk_prepare_enable(l2_pri_mux_clk); -+ WARN(clk_prepare_enable(clks[cpu]), -+ "Unable to turn on CPU%d clock", cpu); -+ } -+ -+ /* -+ * Force reinit of HFPLLs and muxes to overwrite any potential -+ * incorrect configuration of HFPLLs and muxes by the bootloader. -+ * While at it, also make sure the cores are running at known rates -+ * and print the current rate. -+ * -+ * The clocks are set to aux clock rate first to make sure the -+ * secondary mux is not sourcing off of QSB. The rate is then set to -+ * two different rates to force a HFPLL reinit under all -+ * circumstances. -+ */ -+ cur_rate = clk_get_rate(l2_pri_mux_clk); -+ aux_rate = 384000000; -+ if (cur_rate == 1) { -+ pr_info("L2 @ QSB rate. Forcing new rate.\n"); -+ cur_rate = aux_rate; -+ } -+ clk_set_rate(l2_pri_mux_clk, aux_rate); -+ clk_set_rate(l2_pri_mux_clk, 2); -+ clk_set_rate(l2_pri_mux_clk, cur_rate); -+ pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); -+ for_each_possible_cpu(cpu) { -+ clk = clks[cpu]; -+ cur_rate = clk_get_rate(clk); -+ if (cur_rate == 1) { -+ pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); -+ cur_rate = aux_rate; -+ } -+ -+ clk_set_rate(clk, aux_rate); -+ clk_set_rate(clk, 2); -+ clk_set_rate(clk, cur_rate); -+ pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); -+ } -+ -+ of_clk_add_provider(dev->of_node, krait_of_get, clks); -+ -+ return 0; -+} -+ -+static struct platform_driver krait_cc_driver = { -+ .probe = krait_cc_probe, -+ .driver = { -+ .name = "krait-cc", -+ .of_match_table = krait_cc_match_table, -+ }, -+}; -+module_platform_driver(krait_cc_driver); -+ -+MODULE_DESCRIPTION("Krait CPU Clock Driver"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:krait-cc"); diff --git a/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch b/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch deleted file mode 100644 index d0eddc64c2..0000000000 --- a/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch +++ /dev/null @@ -1,160 +0,0 @@ -From patchwork Fri Dec 8 09:42:28 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,10/12] clk: qcom: Add safe switch hook for krait mux clocks -From: Sricharan R -X-Patchwork-Id: 10102057 -Message-Id: <1512726150-7204-11-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:28 +0530 - -When the Hfplls are reprogrammed during the rate change, -the primary muxes which are sourced from the same hfpll -for higher frequencies, needs to be switched to the 'safe -secondary mux' as the parent for that small window. This -is done by registering a clk notifier for the muxes and -switching to the safe parent in the PRE_RATE_CHANGE notifier -and back to the original parent in the POST_RATE_CHANGE notifier. - -Signed-off-by: Sricharan R ---- - drivers/clk/qcom/clk-krait.c | 2 ++ - drivers/clk/qcom/clk-krait.h | 3 +++ - drivers/clk/qcom/krait-cc.c | 56 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 61 insertions(+) - ---- a/drivers/clk/qcom/clk-krait.c -+++ b/drivers/clk/qcom/clk-krait.c -@@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c - if (__clk_is_enabled(hw->clk)) - __krait_mux_set_sel(mux, sel); - -+ mux->reparent = true; -+ - return 0; - } - ---- a/drivers/clk/qcom/clk-krait.h -+++ b/drivers/clk/qcom/clk-krait.h -@@ -23,6 +23,9 @@ struct krait_mux_clk { - u32 shift; - u32 en_mask; - bool lpl; -+ u8 safe_sel; -+ u8 old_index; -+ bool reparent; - - struct clk_hw hw; - struct notifier_block clk_nb; ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = { - 0, - }; - -+/* -+ * Notifier function for switching the muxes to safe parent -+ * while the hfpll is getting reprogrammed. -+ */ -+static int krait_notifier_cb(struct notifier_block *nb, -+ unsigned long event, -+ void *data) -+{ -+ int ret = 0; -+ struct krait_mux_clk *mux = container_of(nb, struct krait_mux_clk, -+ clk_nb); -+ /* Switch to safe parent */ -+ if (event == PRE_RATE_CHANGE) { -+ mux->old_index = krait_mux_clk_ops.get_parent(&mux->hw); -+ ret = krait_mux_clk_ops.set_parent(&mux->hw, mux->safe_sel); -+ mux->reparent = false; -+ /* -+ * By the time POST_RATE_CHANGE notifier is called, -+ * clk framework itself would have changed the parent for the new rate. -+ * Only otherwise, put back to the old parent. -+ */ -+ } else if (event == POST_RATE_CHANGE) { -+ if (!mux->reparent) -+ ret = krait_mux_clk_ops.set_parent(&mux->hw, -+ mux->old_index); -+ } -+ -+ return notifier_from_errno(ret); -+} -+ -+static int krait_notifier_register(struct device *dev, struct clk *clk, -+ struct krait_mux_clk *mux) -+{ -+ int ret = 0; -+ -+ mux->clk_nb.notifier_call = krait_notifier_cb; -+ ret = clk_notifier_register(clk, &mux->clk_nb); -+ if (ret) -+ dev_err(dev, "failed to register clock notifier: %d\n", ret); -+ -+ return ret; -+} -+ - static int - krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) - { -@@ -79,6 +122,7 @@ static int - krait_add_sec_mux(struct device *dev, int id, const char *s, - unsigned int offset, bool unique_aux) - { -+ int ret; - struct krait_mux_clk *mux; - static const char *sec_mux_list[] = { - "acpu_aux", -@@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in - mux->shift = 2; - mux->parent_map = sec_mux_map; - mux->hw.init = &init; -+ mux->safe_sel = 0; - - init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); - if (!init.name) -@@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in - - clk = devm_clk_register(dev, &mux->hw); - -+ ret = krait_notifier_register(dev, clk, mux); -+ if (ret) -+ goto unique_aux; -+ -+unique_aux: - if (unique_aux) - kfree(sec_mux_list[0]); - err_aux: -@@ -128,6 +178,7 @@ static struct clk * - krait_add_pri_mux(struct device *dev, int id, const char *s, - unsigned int offset) - { -+ int ret; - struct krait_mux_clk *mux; - const char *p_names[3]; - struct clk_init_data init = { -@@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in - mux->lpl = id >= 0; - mux->parent_map = pri_mux_map; - mux->hw.init = &init; -+ mux->safe_sel = 2; - - init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s); - if (!init.name) -@@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in - - clk = devm_clk_register(dev, &mux->hw); - -+ ret = krait_notifier_register(dev, clk, mux); -+ if (ret) -+ goto err_p3; -+err_p3: - kfree(p_names[2]); - err_p2: - kfree(p_names[1]); diff --git a/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch b/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch deleted file mode 100644 index 86cb4b9a3e..0000000000 --- a/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch +++ /dev/null @@ -1,307 +0,0 @@ -From patchwork Fri Dec 8 09:42:29 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,11/12] cpufreq: Add module to register cpufreq on Krait CPUs -From: Sricharan R -X-Patchwork-Id: 10102075 -Message-Id: <1512726150-7204-12-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:29 +0530 - -From: Stephen Boyd - -Register a cpufreq-generic device whenever we detect that a -"qcom,krait" compatible CPU is present in DT. - -Cc: -Signed-off-by: Stephen Boyd ---- - .../devicetree/bindings/arm/msm/qcom,pvs.txt | 38 ++++ - drivers/cpufreq/Kconfig.arm | 9 + - drivers/cpufreq/Makefile | 1 + - drivers/cpufreq/qcom-cpufreq.c | 204 +++++++++++++++++++++ - 4 files changed, 252 insertions(+) - create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt - create mode 100644 drivers/cpufreq/qcom-cpufreq.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt -@@ -0,0 +1,38 @@ -+Qualcomm Process Voltage Scaling Tables -+ -+The node name is required to be "qcom,pvs". There shall only be one -+such node present in the root of the tree. -+ -+PROPERTIES -+ -+- qcom,pvs-format-a or qcom,pvs-format-b: -+ Usage: required -+ Value type: -+ Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties. -+ If qcom,pvs-format-a is used the table is two columns -+ (frequency and voltage in that order). If qcom,pvs-format-b is used the table is three columns (frequency, voltage, -+ and current in that order). -+ -+- qcom,speedX-pvsY-bin-vZ: -+ Usage: required -+ Value type: -+ Definition: The PVS table corresponding to the speed bin X, pvs bin Y, -+ and version Z. -+Example: -+ -+ qcom,pvs { -+ qcom,pvs-format-a; -+ qcom,speed0-pvs0-bin-v0 = -+ < 384000000 950000 >, -+ < 486000000 975000 >, -+ < 594000000 1000000 >, -+ < 702000000 1025000 >, -+ < 810000000 1075000 >, -+ < 918000000 1100000 >, -+ < 1026000000 1125000 >, -+ < 1134000000 1175000 >, -+ < 1242000000 1200000 >, -+ < 1350000000 1225000 >, -+ < 1458000000 1237500 >, -+ < 1512000000 1250000 >; -+ }; ---- a/drivers/cpufreq/Kconfig.arm -+++ b/drivers/cpufreq/Kconfig.arm -@@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ - depends on ARCH_OMAP2PLUS - default ARCH_OMAP2PLUS - -+config ARM_QCOM_CPUFREQ -+ tristate "Qualcomm based" -+ depends on ARCH_QCOM -+ select PM_OPP -+ help -+ This adds the CPUFreq driver for Qualcomm SoC based boards. -+ -+ If in doubt, say N. -+ - config ARM_S3C_CPUFREQ - bool - help ---- a/drivers/cpufreq/Makefile -+++ b/drivers/cpufreq/Makefile -@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += me - obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o - obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o - obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o -+obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o - obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o - obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o - obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o ---- /dev/null -+++ b/drivers/cpufreq/qcom-cpufreq.c -@@ -0,0 +1,204 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "cpufreq-dt.h" -+ -+static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver) -+{ -+ void __iomem *base; -+ u32 pte_efuse; -+ -+ *speed = *pvs = *pvs_ver = 0; -+ -+ base = ioremap(0x007000c0, 4); -+ if (!base) { -+ pr_warn("Unable to read efuse data. Defaulting to 0!\n"); -+ return; -+ } -+ -+ pte_efuse = readl_relaxed(base); -+ iounmap(base); -+ -+ *speed = pte_efuse & 0xf; -+ if (*speed == 0xf) -+ *speed = (pte_efuse >> 4) & 0xf; -+ -+ if (*speed == 0xf) { -+ *speed = 0; -+ pr_warn("Speed bin: Defaulting to %d\n", *speed); -+ } else { -+ pr_info("Speed bin: %d\n", *speed); -+ } -+ -+ *pvs = (pte_efuse >> 10) & 0x7; -+ if (*pvs == 0x7) -+ *pvs = (pte_efuse >> 13) & 0x7; -+ -+ if (*pvs == 0x7) { -+ *pvs = 0; -+ pr_warn("PVS bin: Defaulting to %d\n", *pvs); -+ } else { -+ pr_info("PVS bin: %d\n", *pvs); -+ } -+} -+ -+static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver) -+{ -+ u32 pte_efuse, redundant_sel; -+ void __iomem *base; -+ -+ *speed = 0; -+ *pvs = 0; -+ *pvs_ver = 0; -+ -+ base = ioremap(0xfc4b80b0, 8); -+ if (!base) { -+ pr_warn("Unable to read efuse data. Defaulting to 0!\n"); -+ return; -+ } -+ -+ pte_efuse = readl_relaxed(base); -+ redundant_sel = (pte_efuse >> 24) & 0x7; -+ *speed = pte_efuse & 0x7; -+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */ -+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); -+ *pvs_ver = (pte_efuse >> 4) & 0x3; -+ -+ switch (redundant_sel) { -+ case 1: -+ *speed = (pte_efuse >> 27) & 0xf; -+ break; -+ case 2: -+ *pvs = (pte_efuse >> 27) & 0xf; -+ break; -+ } -+ -+ /* Check SPEED_BIN_BLOW_STATUS */ -+ if (pte_efuse & BIT(3)) { -+ pr_info("Speed bin: %d\n", *speed); -+ } else { -+ pr_warn("Speed bin not set. Defaulting to 0!\n"); -+ *speed = 0; -+ } -+ -+ /* Check PVS_BLOW_STATUS */ -+ pte_efuse = readl_relaxed(base + 0x4) & BIT(21); -+ if (pte_efuse) { -+ pr_info("PVS bin: %d\n", *pvs); -+ } else { -+ pr_warn("PVS bin not set. Defaulting to 0!\n"); -+ *pvs = 0; -+ } -+ -+ pr_info("PVS version: %d\n", *pvs_ver); -+ iounmap(base); -+} -+ -+static int __init qcom_cpufreq_populate_opps(void) -+{ -+ int len, rows, cols, i, k, speed, pvs, pvs_ver; -+ char table_name[] = "qcom,speedXX-pvsXX-bin-vXX"; -+ struct device_node *np; -+ struct device *dev; -+ int cpu = 0; -+ -+ np = of_find_node_by_name(NULL, "qcom,pvs"); -+ if (!np) -+ return -ENODEV; -+ -+ if (of_property_read_bool(np, "qcom,pvs-format-a")) { -+ get_krait_bin_format_a(&speed, &pvs, &pvs_ver); -+ cols = 2; -+ } else if (of_property_read_bool(np, "qcom,pvs-format-b")) { -+ get_krait_bin_format_b(&speed, &pvs, &pvs_ver); -+ cols = 3; -+ } else { -+ return -ENODEV; -+ } -+ -+ snprintf(table_name, sizeof(table_name), -+ "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver); -+ -+ if (!of_find_property(np, table_name, &len)) -+ return -EINVAL; -+ -+ len /= sizeof(u32); -+ if (len % cols || len == 0) -+ return -EINVAL; -+ -+ rows = len / cols; -+ -+ for (i = 0, k = 0; i < rows; i++) { -+ u32 freq, volt; -+ -+ of_property_read_u32_index(np, table_name, k++, &freq); -+ of_property_read_u32_index(np, table_name, k++, &volt); -+ while (k % cols) -+ k++; /* Skip uA entries if present */ -+ for (cpu = 0; cpu < num_possible_cpus(); cpu++) { -+ dev = get_cpu_device(cpu); -+ if (!dev) -+ return -ENODEV; -+ if (dev_pm_opp_add(dev, freq, volt)) -+ pr_warn("failed to add OPP %u\n", freq); -+ } -+ } -+ -+ return 0; -+} -+ -+static int __init qcom_cpufreq_driver_init(void) -+{ -+ struct cpufreq_dt_platform_data pdata = { .independent_clocks = true }; -+ struct platform_device_info devinfo = { -+ .name = "cpufreq-dt", -+ .data = &pdata, -+ .size_data = sizeof(pdata), -+ }; -+ struct device *cpu_dev; -+ struct device_node *np; -+ int ret; -+ -+ cpu_dev = get_cpu_device(0); -+ if (!cpu_dev) -+ return -ENODEV; -+ -+ np = of_node_get(cpu_dev->of_node); -+ if (!np) -+ return -ENOENT; -+ -+ if (!of_device_is_compatible(np, "qcom,krait")) { -+ of_node_put(np); -+ return -ENODEV; -+ } -+ of_node_put(np); -+ -+ ret = qcom_cpufreq_populate_opps(); -+ if (ret) -+ return ret; -+ -+ return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo)); -+} -+module_init(qcom_cpufreq_driver_init); -+ -+MODULE_DESCRIPTION("Qualcomm CPUfreq driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch b/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch deleted file mode 100644 index b3b3072bcb..0000000000 --- a/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch +++ /dev/null @@ -1,66 +0,0 @@ -From patchwork Fri Dec 8 09:42:30 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v4,12/12] cpufreq: dt: Reintroduce independent_clocks platform data -From: Sricharan R -X-Patchwork-Id: 10102073 -Message-Id: <1512726150-7204-13-git-send-email-sricharan@codeaurora.org> -To: mturquette@baylibre.com, sboyd@codeaurora.org, - devicetree@vger.kernel.org, linux-pm@vger.kernel.org, - linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, - viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org -Cc: sricharan@codeaurora.org -Date: Fri, 8 Dec 2017 15:12:30 +0530 - -The Platform data was removed earlier by, -'commit eb96924acddc ("cpufreq: dt: Kill platform-data")' -since there were no users at that time. -Now this is required when the each of the cpu clocks -can be scaled independently, which is the case -for krait cores. So reintroduce it. - -Signed-off-by: Sricharan R ---- - drivers/cpufreq/cpufreq-dt.c | 7 ++++++- - drivers/cpufreq/cpufreq-dt.h | 6 ++++++ - 2 files changed, 12 insertions(+), 1 deletion(-) - ---- a/drivers/cpufreq/cpufreq-dt.c -+++ b/drivers/cpufreq/cpufreq-dt.c -@@ -231,7 +231,10 @@ static int cpufreq_init(struct cpufreq_p - } - - if (fallback) { -- cpumask_setall(policy->cpus); -+ struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data(); -+ -+ if (!pd || !pd->independent_clocks) -+ cpumask_setall(policy->cpus); - - /* - * OPP tables are initialized only for policy->cpu, do it for -@@ -376,6 +379,8 @@ static int dt_cpufreq_probe(struct platf - if (data && data->have_governor_per_policy) - dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY; - -+ dt_cpufreq_driver.driver_data = data; -+ - ret = cpufreq_register_driver(&dt_cpufreq_driver); - if (ret) - dev_err(&pdev->dev, "failed register driver: %d\n", ret); ---- a/drivers/cpufreq/cpufreq-dt.h -+++ b/drivers/cpufreq/cpufreq-dt.h -@@ -13,6 +13,12 @@ - #include - - struct cpufreq_dt_platform_data { -+ /* -+ * True when each CPU has its own clock to control its -+ * frequency, false when all CPUs are controlled by a single -+ * clock. -+ */ -+ bool independent_clocks; - bool have_governor_per_policy; - }; - diff --git a/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch b/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch deleted file mode 100644 index fe98980766..0000000000 --- a/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch +++ /dev/null @@ -1,72 +0,0 @@ -From c7c6a0f50f9ac3620c611ce06ba1f9fafea0444e Mon Sep 17 00:00:00 2001 -From: Archit Taneja -Date: Mon, 3 Aug 2015 10:38:14 +0530 -Subject: [PATCH 47/69] mtd: nand: Create a BBT flag to access bad block - markers in raw mode - -Some controllers can access the factory bad block marker from OOB only -when they read it in raw mode. When ECC is enabled, these controllers -discard reading/writing bad block markers, preventing access to them -altogether. - -The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks. -This results in the nand driver's ecc->read_oob() op to be called, which -works with ECC enabled. - -Create a new BBT option flag that tells nand_bbt to force the mode to -MTD_OPS_RAW. This would result in the correct op being called for the -underlying nand controller driver. - -Reviewed-by: Andy Gross -Signed-off-by: Archit Taneja ---- - drivers/mtd/nand/nand_base.c | 6 +++++- - drivers/mtd/nand/nand_bbt.c | 6 +++++- - include/linux/mtd/bbm.h | 6 ++++++ - 3 files changed, 16 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -481,7 +481,11 @@ static int nand_default_block_markbad(st - } else { - ops.len = ops.ooblen = 1; - } -- ops.mode = MTD_OPS_PLACE_OOB; -+ -+ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW)) -+ ops.mode = MTD_OPS_RAW; -+ else -+ ops.mode = MTD_OPS_PLACE_OOB; - - /* Write to first/last page(s) if necessary */ - if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) ---- a/drivers/mtd/nand/nand_bbt.c -+++ b/drivers/mtd/nand/nand_bbt.c -@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in - ops.oobbuf = buf; - ops.ooboffs = 0; - ops.datbuf = NULL; -- ops.mode = MTD_OPS_PLACE_OOB; -+ -+ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW)) -+ ops.mode = MTD_OPS_RAW; -+ else -+ ops.mode = MTD_OPS_PLACE_OOB; - - for (j = 0; j < numpages; j++) { - /* ---- a/include/linux/mtd/bbm.h -+++ b/include/linux/mtd/bbm.h -@@ -116,6 +116,12 @@ struct nand_bbt_descr { - #define NAND_BBT_NO_OOB_BBM 0x00080000 - - /* -+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To -+ * be used by controllers which can access BBM only when ECC is disabled, i.e, -+ * when in RAW access mode -+ */ -+#define NAND_BBT_ACCESS_BBM_RAW 0x00100000 -+/* - * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr - * was allocated dynamicaly and must be freed in nand_release(). Has no meaning - * in nand_chip.bbt_options. diff --git a/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch b/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch deleted file mode 100644 index 7c78d444f8..0000000000 --- a/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 5c294df1715d673f94f3b0a6e1ea3a426ca35e6e Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Thu, 28 Apr 2016 16:20:12 +0300 -Subject: [PATCH 48/69] PM / OPP: HACK: Allow to set regulator without opp_list - -Signed-off-by: Georgi Djakov ---- - drivers/base/power/opp/core.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/base/power/opp/core.c -+++ b/drivers/base/power/opp/core.c -@@ -1280,11 +1280,13 @@ struct opp_table *dev_pm_opp_set_regulat - if (!opp_table) - return ERR_PTR(-ENOMEM); - -+#if 0 - /* This should be called before OPPs are initialized */ - if (WARN_ON(!list_empty(&opp_table->opp_list))) { - ret = -EBUSY; - goto err; - } -+#endif - - /* Already have regulators set */ - if (opp_table->regulators) { diff --git a/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch b/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch deleted file mode 100644 index ef48e9f01b..0000000000 --- a/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch +++ /dev/null @@ -1,147 +0,0 @@ -From c949f08cf20fe82971fbdb4015daa38210da492e Mon Sep 17 00:00:00 2001 -From: Stephen Boyd -Date: Fri, 18 Sep 2015 17:52:06 -0700 -Subject: [PATCH 49/69] PM / OPP: Support adjusting OPP voltages at runtime - -On some SoCs the Adaptive Voltage Scaling (AVS) technique is -employed to optimize the operating voltage of a device. At a -given frequency, the hardware monitors dynamic factors and either -makes a suggestion for how much to adjust a voltage for the -current frequency, or it automatically adjusts the voltage -without software intervention. Add an API to the OPP library for -the former case, so that AVS type devices can update the voltages -for an OPP when the hardware determines the voltage should -change. The assumption is that drivers like CPUfreq or devfreq -will register for the OPP notifiers and adjust the voltage -according to suggestions that AVS makes. - -Cc: Nishanth Menon -Acked-by: Viresh Kumar -Signed-off-by: Stephen Boyd -Acked-by: Viresh Kumar -Signed-off-by: Georgi Djakov ---- - drivers/base/power/opp/core.c | 77 +++++++++++++++++++++++++++++++++++++++++++ - include/linux/pm_opp.h | 11 +++++++ - 2 files changed, 88 insertions(+) - ---- a/drivers/base/power/opp/core.c -+++ b/drivers/base/power/opp/core.c -@@ -1608,6 +1608,83 @@ put_table: - } - - /** -+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP -+ * @dev: device for which we do this operation -+ * @freq: OPP frequency to adjust voltage of -+ * @u_volt: new OPP voltage -+ * -+ * Change the voltage of an OPP with an RCU operation. -+ * -+ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the -+ * copy operation, returns 0 if no modifcation was done OR modification was -+ * successful. -+ * -+ * Locking: The internal device_opp and opp structures are RCU protected. -+ * Hence this function internally uses RCU updater strategy with mutex locks to -+ * keep the integrity of the internal data structures. Callers should ensure -+ * that this function is *NOT* called under RCU protection or in contexts where -+ * mutex locking or synchronize_rcu() blocking calls cannot be used. -+ */ -+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, -+ unsigned long u_volt) -+{ -+ struct opp_table *opp_table; -+ struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); -+ int r = 0; -+ -+ /* keep the node allocated */ -+ new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL); -+ if (!new_opp) -+ return -ENOMEM; -+ -+ mutex_lock(&opp_table_lock); -+ -+ /* Find the opp_table */ -+ opp_table = _find_opp_table(dev); -+ if (IS_ERR(opp_table)) { -+ r = PTR_ERR(opp_table); -+ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); -+ goto unlock; -+ } -+ -+ /* Do we have the frequency? */ -+ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { -+ if (tmp_opp->rate == freq) { -+ opp = tmp_opp; -+ break; -+ } -+ } -+ if (IS_ERR(opp)) { -+ r = PTR_ERR(opp); -+ goto unlock; -+ } -+ -+ /* Is update really needed? */ -+ if (opp->supplies[0].u_volt == u_volt) -+ goto unlock; -+ /* copy the old data over */ -+ *new_opp = *opp; -+ -+ /* plug in new node */ -+ new_opp->supplies[0].u_volt = u_volt; -+ -+ list_replace(&opp->node, &new_opp->node); -+ mutex_unlock(&opp_table_lock); -+ kfree(opp); -+ -+ /* Notify the change of the OPP */ -+ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE, -+ new_opp); -+ -+ return 0; -+ -+unlock: -+ mutex_unlock(&opp_table_lock); -+ kfree(new_opp); -+ return r; -+} -+ -+/** - * dev_pm_opp_enable() - Enable a specific OPP - * @dev: device for which we do this operation - * @freq: OPP frequency to enable ---- a/include/linux/pm_opp.h -+++ b/include/linux/pm_opp.h -@@ -25,6 +25,7 @@ struct opp_table; - - enum dev_pm_opp_event { - OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, -+ OPP_EVENT_ADJUST_VOLTAGE, - }; - - /** -@@ -108,6 +109,9 @@ int dev_pm_opp_add(struct device *dev, u - unsigned long u_volt); - void dev_pm_opp_remove(struct device *dev, unsigned long freq); - -+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, -+ unsigned long u_volt); -+ - int dev_pm_opp_enable(struct device *dev, unsigned long freq); - - int dev_pm_opp_disable(struct device *dev, unsigned long freq); -@@ -208,6 +212,13 @@ static inline void dev_pm_opp_remove(str - { - } - -+static inline int -+dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, -+ unsigned long u_volt) -+{ -+ return 0; -+} -+ - static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq) - { - return 0; diff --git a/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch b/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch deleted file mode 100644 index 22ae309801..0000000000 --- a/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch +++ /dev/null @@ -1,52 +0,0 @@ -From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Thu, 12 May 2016 14:41:33 +0300 -Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for - device - -Signed-off-by: Georgi Djakov ---- - drivers/base/power/opp/core.c | 21 +++++++++++++++++++++ - include/linux/pm_opp.h | 1 + - 2 files changed, 22 insertions(+) - ---- a/drivers/base/power/opp/core.c -+++ b/drivers/base/power/opp/core.c -@@ -126,6 +126,27 @@ unsigned long dev_pm_opp_get_freq(struct - } - EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); - -+struct regulator *dev_pm_opp_get_regulator(struct device *dev) -+{ -+ struct opp_table *opp_table; -+ struct regulator *reg; -+ -+ rcu_read_lock(); -+ -+ opp_table = _find_opp_table(dev); -+ if (IS_ERR(opp_table)) { -+ rcu_read_unlock(); -+ return ERR_CAST(opp_table); -+ } -+ -+ reg = opp_table->regulators[0]; -+ -+ rcu_read_unlock(); -+ -+ return reg; -+} -+EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator); -+ - /** - * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not - * @opp: opp for which turbo mode is being verified ---- a/include/linux/pm_opp.h -+++ b/include/linux/pm_opp.h -@@ -85,6 +85,7 @@ void dev_pm_opp_put_opp_table(struct opp - unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp); - - unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); -+struct regulator *dev_pm_opp_get_regulator(struct device *dev); - - bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp); - diff --git a/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch b/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch deleted file mode 100644 index 7cde22be0b..0000000000 --- a/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Thu, 25 Aug 2016 18:43:35 +0300 -Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting - the OPP - -When the voltage is adjusted, the voltage tolerance is not updated. -This can lead to situations where the voltage min value is greater -than the voltage max value. The final result is triggering a BUG() -in the regulator core. -Fix this by updating the voltage tolerance values too. - -Signed-off-by: Georgi Djakov ---- - drivers/base/power/opp/core.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/base/power/opp/core.c -+++ b/drivers/base/power/opp/core.c -@@ -1652,6 +1652,7 @@ int dev_pm_opp_adjust_voltage(struct dev - struct opp_table *opp_table; - struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); - int r = 0; -+ unsigned long tol; - - /* keep the node allocated */ - new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL); -@@ -1688,6 +1689,10 @@ int dev_pm_opp_adjust_voltage(struct dev - - /* plug in new node */ - new_opp->supplies[0].u_volt = u_volt; -+ tol = u_volt * opp_table->voltage_tolerance_v1 / 100; -+ new_opp->supplies[0].u_volt = u_volt; -+ new_opp->supplies[0].u_volt_min = u_volt - tol; -+ new_opp->supplies[0].u_volt_max = u_volt + tol; - - list_replace(&opp->node, &new_opp->node); - mutex_unlock(&opp_table_lock); diff --git a/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch b/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch deleted file mode 100644 index 0d2862c609..0000000000 --- a/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch +++ /dev/null @@ -1,55 +0,0 @@ -From ef10381ca4d01848ebedb4afb2c78feb8052f103 Mon Sep 17 00:00:00 2001 -From: Adrian Panella -Date: Thu, 9 Mar 2017 08:26:54 +0100 -Subject: [PATCH 53/69] regulator: add smb208 support - -Signed-off-by: Adrian Panella ---- - Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++ - drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++ - 2 files changed, 13 insertions(+) - ---- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt -+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt -@@ -61,6 +61,7 @@ Regulator nodes are identified by their - "qcom,rpm-pm8901-regulators" - "qcom,rpm-pm8921-regulators" - "qcom,rpm-pm8018-regulators" -+ "qcom,rpm-smb208-regulators" - - - vdd_l0_l1_lvs-supply: - - vdd_l2_l11_l12-supply: -@@ -171,6 +172,9 @@ pm8018: - s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, lvs1 - -+smb208: -+ s1a, s1b, s2a, s2b -+ - The content of each sub-node is defined by the standard binding for regulators - - see regulator.txt - with additional custom properties described below: - ---- a/drivers/regulator/qcom_rpm-regulator.c -+++ b/drivers/regulator/qcom_rpm-regulator.c -@@ -933,12 +933,21 @@ static const struct rpm_regulator_data r - { } - }; - -+static const struct rpm_regulator_data rpm_smb208_regulators[] = { -+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" }, -+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" }, -+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" }, -+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" }, -+ { } -+}; -+ - static const struct of_device_id rpm_of_match[] = { - { .compatible = "qcom,rpm-pm8018-regulators", - .data = &rpm_pm8018_regulators }, - { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators }, - { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators }, - { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators }, -+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators }, - { } - }; - MODULE_DEVICE_TABLE(of, rpm_of_match); diff --git a/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch b/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch deleted file mode 100644 index dcf0bcd3f2..0000000000 --- a/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch +++ /dev/null @@ -1,128 +0,0 @@ -From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001 -From: Stephen Boyd -Date: Fri, 18 Sep 2015 17:52:08 -0700 -Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events - -On some SoCs the Adaptive Voltage Scaling (AVS) technique is -employed to optimize the operating voltage of a device. At a -given frequency, the hardware monitors dynamic factors and either -makes a suggestion for how much to adjust a voltage for the -current frequency, or it automatically adjusts the voltage -without software intervention. - -In the former case, an AVS driver will call -dev_pm_opp_modify_voltage() and update the voltage for the -particular OPP the CPUs are using. Add an OPP notifier to -cpufreq-dt so that we can adjust the voltage of the CPU when AVS -updates the OPP. - -Signed-off-by: Stephen Boyd -Acked-by: Viresh Kumar -Signed-off-by: Georgi Djakov ---- - drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 65 insertions(+), 3 deletions(-) - ---- a/drivers/cpufreq/cpufreq-dt.c -+++ b/drivers/cpufreq/cpufreq-dt.c -@@ -32,6 +32,9 @@ struct private_data { - struct device *cpu_dev; - struct thermal_cooling_device *cdev; - const char *reg_name; -+ struct notifier_block opp_nb; -+ struct mutex lock; -+ unsigned long opp_freq; - bool have_static_opps; - }; - -@@ -44,9 +47,16 @@ static struct freq_attr *cpufreq_dt_attr - static int set_target(struct cpufreq_policy *policy, unsigned int index) - { - struct private_data *priv = policy->driver_data; -+ int ret; -+ unsigned long target_freq = policy->freq_table[index].frequency * 1000; -+ -+ mutex_lock(&priv->lock); -+ ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq); -+ if (!ret) -+ priv->opp_freq = target_freq; -+ mutex_unlock(&priv->lock); - -- return dev_pm_opp_set_rate(priv->cpu_dev, -- policy->freq_table[index].frequency * 1000); -+ return ret; - } - - /* -@@ -87,6 +97,39 @@ node_put: - return name; - } - -+static int opp_notifier(struct notifier_block *nb, unsigned long event, -+ void *data) -+{ -+ struct dev_pm_opp *opp = data; -+ struct private_data *priv = container_of(nb, struct private_data, -+ opp_nb); -+ struct device *cpu_dev = priv->cpu_dev; -+ struct regulator *cpu_reg; -+ unsigned long volt, freq; -+ int ret = 0; -+ -+ if (event == OPP_EVENT_ADJUST_VOLTAGE) { -+ cpu_reg = dev_pm_opp_get_regulator(cpu_dev); -+ if (IS_ERR(cpu_reg)) { -+ ret = PTR_ERR(cpu_reg); -+ goto out; -+ } -+ volt = dev_pm_opp_get_voltage(opp); -+ freq = dev_pm_opp_get_freq(opp); -+ -+ mutex_lock(&priv->lock); -+ if (freq == priv->opp_freq) { -+ ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt); -+ } -+ mutex_unlock(&priv->lock); -+ if (ret) -+ dev_err(cpu_dev, "failed to scale voltage: %d\n", ret); -+ } -+ -+out: -+ return notifier_from_errno(ret); -+} -+ - static int resources_available(void) - { - struct device *cpu_dev; -@@ -153,6 +196,7 @@ static int cpufreq_init(struct cpufreq_p - bool fallback = false; - const char *name; - int ret; -+ struct srcu_notifier_head *opp_srcu_head; - - cpu_dev = get_cpu_device(policy->cpu); - if (!cpu_dev) { -@@ -246,10 +290,13 @@ static int cpufreq_init(struct cpufreq_p - __func__, ret); - } - -+ mutex_init(&priv->lock); -+ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb); -+ - ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); - if (ret) { - dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); -- goto out_free_opp; -+ goto out_unregister_nb; - } - - priv->cpu_dev = cpu_dev; -@@ -285,6 +332,8 @@ static int cpufreq_init(struct cpufreq_p - - out_free_cpufreq_table: - dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); -+out_unregister_nb: -+ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb); - out_free_opp: - if (priv->have_static_opps) - dev_pm_opp_of_cpumask_remove_table(policy->cpus); diff --git a/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch deleted file mode 100644 index 1c26650b78..0000000000 --- a/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 0759cdff49f1cf361bf503c13f7bcb33da43ab95 Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Tue, 8 Sep 2015 11:24:41 +0300 -Subject: [PATCH 55/69] cpufreq-dt: Add L2 frequency scaling support - -Signed-off-by: Georgi Djakov ---- - drivers/cpufreq/cpufreq-dt.c | 41 ++++++++++++++++++++++++++++++++++++++++- - include/linux/cpufreq.h | 2 ++ - 2 files changed, 42 insertions(+), 1 deletion(-) - ---- a/drivers/cpufreq/cpufreq-dt.c -+++ b/drivers/cpufreq/cpufreq-dt.c -@@ -49,11 +49,41 @@ static int set_target(struct cpufreq_pol - struct private_data *priv = policy->driver_data; - int ret; - unsigned long target_freq = policy->freq_table[index].frequency * 1000; -+ struct clk *l2_clk = policy->l2_clk; -+ unsigned int l2_freq; -+ unsigned long new_l2_freq = 0; - - mutex_lock(&priv->lock); - ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq); -- if (!ret) -+ -+ if (!ret) { -+ if (!IS_ERR(l2_clk) && policy->l2_rate[0] && policy->l2_rate[1] && -+ policy->l2_rate[2]) { -+ static unsigned long krait_l2[CONFIG_NR_CPUS] = { }; -+ int cpu, ret = 0; -+ -+ if (target_freq >= policy->l2_rate[2]) -+ new_l2_freq = policy->l2_rate[2]; -+ else if (target_freq >= policy->l2_rate[1]) -+ new_l2_freq = policy->l2_rate[1]; -+ else -+ new_l2_freq = policy->l2_rate[0]; -+ -+ krait_l2[policy->cpu] = new_l2_freq; -+ for_each_present_cpu(cpu) -+ new_l2_freq = max(new_l2_freq, krait_l2[cpu]); -+ -+ l2_freq = clk_get_rate(l2_clk); -+ -+ if (l2_freq != new_l2_freq) { -+ /* scale l2 with the core */ -+ ret = clk_set_rate(l2_clk, new_l2_freq); -+ } -+ } -+ - priv->opp_freq = target_freq; -+ } -+ - mutex_unlock(&priv->lock); - - return ret; -@@ -197,6 +227,8 @@ static int cpufreq_init(struct cpufreq_p - const char *name; - int ret; - struct srcu_notifier_head *opp_srcu_head; -+ struct device_node *l2_np; -+ struct clk *l2_clk = NULL; - - cpu_dev = get_cpu_device(policy->cpu); - if (!cpu_dev) { -@@ -305,6 +337,13 @@ static int cpufreq_init(struct cpufreq_p - - policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; - -+ l2_clk = clk_get(cpu_dev, "l2"); -+ if (!IS_ERR(l2_clk)) -+ policy->l2_clk = l2_clk; -+ l2_np = of_find_node_by_name(NULL, "qcom,l2"); -+ if (l2_np) -+ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3); -+ - ret = cpufreq_table_validate_and_show(policy, freq_table); - if (ret) { - dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__, ---- a/include/linux/cpufreq.h -+++ b/include/linux/cpufreq.h -@@ -73,6 +73,8 @@ struct cpufreq_policy { - unsigned int cpu; /* cpu managing this policy, must be online */ - - struct clk *clk; -+ struct clk *l2_clk; /* L2 clock */ -+ unsigned int l2_rate[3]; /* L2 bus clock rate thresholds */ - struct cpufreq_cpuinfo cpuinfo;/* see above */ - - unsigned int min; /* in kHz */ diff --git a/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch b/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch deleted file mode 100644 index d9d76e409b..0000000000 --- a/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Tue, 17 May 2016 16:15:43 +0300 -Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks - -Signed-off-by: Georgi Djakov ---- - drivers/cpufreq/cpufreq-dt.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/cpufreq/cpufreq-dt.c -+++ b/drivers/cpufreq/cpufreq-dt.c -@@ -144,8 +144,10 @@ static int opp_notifier(struct notifier_ - ret = PTR_ERR(cpu_reg); - goto out; - } -+ rcu_read_lock(); - volt = dev_pm_opp_get_voltage(opp); - freq = dev_pm_opp_get_freq(opp); -+ rcu_read_unlock(); - - mutex_lock(&priv->lock); - if (freq == priv->opp_freq) { diff --git a/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch b/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch deleted file mode 100644 index 5bd58c8137..0000000000 --- a/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 04ca10340f1b4d92e849724d322a7ca225d11539 Mon Sep 17 00:00:00 2001 -From: Lina Iyer -Date: Wed, 25 Mar 2015 14:25:29 -0600 -Subject: [PATCH 59/69] ARM: cpuidle: Add cpuidle support for QCOM cpus - -Define ARM_QCOM_CPUIDLE config item to enable cpuidle support. - -Cc: Stephen Boyd -Cc: Arnd Bergmann -Cc: Kevin Hilman -Cc: Daniel Lezcano -Signed-off-by: Lina Iyer ---- - drivers/cpuidle/Kconfig.arm | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/cpuidle/Kconfig.arm -+++ b/drivers/cpuidle/Kconfig.arm -@@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE - depends on ARCH_MVEBU && !ARM64 - help - Select this to enable cpuidle on Armada 370, 38x and XP processors. -+ -+config ARM_QCOM_CPUIDLE -+ bool "CPU Idle Driver for QCOM processors" -+ depends on ARCH_QCOM -+ select ARM_CPUIDLE -+ help -+ Select this to enable cpuidle on QCOM processors. diff --git a/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch deleted file mode 100644 index 581761f580..0000000000 --- a/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch +++ /dev/null @@ -1,62 +0,0 @@ -From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001 -From: Mathieu Olivari -Date: Wed, 29 Apr 2015 15:21:46 -0700 -Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom - -ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended -on most ARM architectures. This automatically calculate ZRELADDR by -masking PHYS_OFFSET with 0xf8000000. - -However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware -network accelerators, and the bootloader removes this section from the -layout passed from the ATAGS (when used). - -For newer bootloader, when DT is used, this is not a problem, we just -reserve this memory in the device tree. But if the bootloader doesn't -have DT support, then ATAGS have to be used. In this case, the ARM -decompressor will position the kernel in this low mem, which will not be -in the RAM section mapped by the bootloader, which means the kernel will -freeze in the middle of the boot process trying to map the memory. - -As a work around, this patch allows disabling AUTO_ZRELADDR when -ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders -which don't support device-tree, which is the case on certain early -IPQ806x based designs. - -Signed-off-by: Mathieu Olivari ---- - arch/arm/Kconfig | 2 +- - arch/arm/Makefile | 2 ++ - arch/arm/mach-qcom/Makefile.boot | 1 + - 3 files changed, 4 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/mach-qcom/Makefile.boot - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -341,7 +341,7 @@ config ARCH_MULTIPLATFORM - depends on MMU - select ARM_HAS_SG_CHAIN - select ARM_PATCH_PHYS_VIRT -- select AUTO_ZRELADDR -+ select AUTO_ZRELADDR if !ARCH_QCOM - select TIMER_OF - select COMMON_CLK - select GENERIC_CLOCKEVENTS ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -257,9 +257,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac - else - MACHINE := - endif -+ifeq ($(CONFIG_ARCH_QCOM),) - ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y) - MACHINE := - endif -+endif - - machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) - platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) ---- /dev/null -+++ b/arch/arm/mach-qcom/Makefile.boot -@@ -0,0 +1 @@ -+zreladdr-y+= 0x42208000 diff --git a/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch deleted file mode 100644 index a4a957545b..0000000000 --- a/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 9 Mar 2017 09:31:44 +0100 -Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting - -Signed-off-by: John Crispin ---- - drivers/mtd/qcom_smem_part.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/mtd/qcom_smem_part.c -+++ b/drivers/mtd/qcom_smem_part.c -@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st - m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz); - m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz); - -+ /* "rootfs" conflicts with OpenWrt auto mounting */ -+ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs")) -+ m_part->name = "ubi"; -+ - /* - * The last SMEM partition may have its size marked as - * something like 0xffffffff, which means "until the end of the diff --git a/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch b/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch deleted file mode 100644 index 717934315a..0000000000 --- a/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch +++ /dev/null @@ -1,25 +0,0 @@ -From a16fcf911a020e46439a3bb3e702463fc3159831 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Wed, 18 Nov 2015 12:38:56 +0530 -Subject: [PATCH 62/69] ipq806x: gcc: Added the enable regs and mask for PRNG - -kernel got hanged while reading from /dev/hwrng at the -time of PRNG clock enable - -Change-Id: I89856c7e19e6639508e6a2774304583a3ec91172 -Signed-off-by: Abhishek Sahu ---- - drivers/clk/qcom/gcc-ipq806x.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = { - .parent_map = gcc_pxo_pll8_map, - }, - .clkr = { -+ .enable_reg = 0x2e80, -+ .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "prng_src", - .parent_names = gcc_pxo_pll8, diff --git a/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch b/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch deleted file mode 100644 index 685b0c3ce1..0000000000 --- a/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch +++ /dev/null @@ -1,627 +0,0 @@ -From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001 -From: Rajith Cherian -Date: Tue, 14 Feb 2017 18:30:43 +0530 -Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064 - -Add TSENS driver template to support IPQ8064. -This is a base file copied from tsens-8960.c - -Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7 -Signed-off-by: Rajith Cherian - -ipq8064: tsens: TSENS driver support for IPQ8064 - -Support for IPQ8064 tsens driver. The driver works -with the thermal framework. The driver overrides the -following fucntionalities: - -1. Get current temperature. -2. Get/Set trip temperatures. -3. Enabled/Disable trip points. -4. ISR for threshold generated interrupt. -5. Notify userspace when trip points are hit. - -Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918 -Signed-off-by: Rajith Cherian ---- - .../devicetree/bindings/thermal/qcom-tsens.txt | 1 + - drivers/thermal/qcom/Makefile | 3 +- - drivers/thermal/qcom/tsens-ipq8064.c | 551 +++++++++++++++++++++ - drivers/thermal/qcom/tsens.c | 3 + - drivers/thermal/qcom/tsens.h | 2 +- - 5 files changed, 558 insertions(+), 2 deletions(-) - create mode 100644 drivers/thermal/qcom/tsens-ipq8064.c - ---- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt -+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt -@@ -5,6 +5,7 @@ Required properties: - - "qcom,msm8916-tsens" : For 8916 Family of SoCs - - "qcom,msm8974-tsens" : For 8974 Family of SoCs - - "qcom,msm8996-tsens" : For 8996 Family of SoCs -+ - "qcom,ipq8064-tsens" : For IPQ8064 - - - reg: Address range of the thermal registers - - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. ---- a/drivers/thermal/qcom/Makefile -+++ b/drivers/thermal/qcom/Makefile -@@ -1,2 +1,3 @@ - obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o --qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o -+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o \ -+ tsens-ipq8064.o ---- /dev/null -+++ b/drivers/thermal/qcom/tsens-ipq8064.c -@@ -0,0 +1,551 @@ -+/* -+ * Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "tsens.h" -+ -+#define CAL_MDEGC 30000 -+ -+#define CONFIG_ADDR 0x3640 -+/* CONFIG_ADDR bitmasks */ -+#define CONFIG 0x9b -+#define CONFIG_MASK 0xf -+#define CONFIG_SHIFT 0 -+ -+#define STATUS_CNTL_8064 0x3660 -+#define CNTL_ADDR 0x3620 -+/* CNTL_ADDR bitmasks */ -+#define EN BIT(0) -+#define SW_RST BIT(1) -+#define SENSOR0_EN BIT(3) -+#define SLP_CLK_ENA BIT(26) -+#define MEASURE_PERIOD 1 -+#define SENSOR0_SHIFT 3 -+ -+/* INT_STATUS_ADDR bitmasks */ -+#define MIN_STATUS_MASK BIT(0) -+#define LOWER_STATUS_CLR BIT(1) -+#define UPPER_STATUS_CLR BIT(2) -+#define MAX_STATUS_MASK BIT(3) -+ -+#define THRESHOLD_ADDR 0x3624 -+/* THRESHOLD_ADDR bitmasks */ -+#define THRESHOLD_MAX_CODE 0x20000 -+#define THRESHOLD_MIN_CODE 0 -+#define THRESHOLD_MAX_LIMIT_SHIFT 24 -+#define THRESHOLD_MIN_LIMIT_SHIFT 16 -+#define THRESHOLD_UPPER_LIMIT_SHIFT 8 -+#define THRESHOLD_LOWER_LIMIT_SHIFT 0 -+#define THRESHOLD_MAX_LIMIT_MASK (THRESHOLD_MAX_CODE << \ -+ THRESHOLD_MAX_LIMIT_SHIFT) -+#define THRESHOLD_MIN_LIMIT_MASK (THRESHOLD_MAX_CODE << \ -+ THRESHOLD_MIN_LIMIT_SHIFT) -+#define THRESHOLD_UPPER_LIMIT_MASK (THRESHOLD_MAX_CODE << \ -+ THRESHOLD_UPPER_LIMIT_SHIFT) -+#define THRESHOLD_LOWER_LIMIT_MASK (THRESHOLD_MAX_CODE << \ -+ THRESHOLD_LOWER_LIMIT_SHIFT) -+ -+/* Initial temperature threshold values */ -+#define LOWER_LIMIT_TH 0x9d /* 95C */ -+#define UPPER_LIMIT_TH 0xa6 /* 105C */ -+#define MIN_LIMIT_TH 0x0 -+#define MAX_LIMIT_TH 0xff -+ -+#define S0_STATUS_ADDR 0x3628 -+#define STATUS_ADDR_OFFSET 2 -+#define SENSOR_STATUS_SIZE 4 -+#define INT_STATUS_ADDR 0x363c -+#define TRDY_MASK BIT(7) -+#define TIMEOUT_US 100 -+ -+#define TSENS_EN BIT(0) -+#define TSENS_SW_RST BIT(1) -+#define TSENS_ADC_CLK_SEL BIT(2) -+#define SENSOR0_EN BIT(3) -+#define SENSOR1_EN BIT(4) -+#define SENSOR2_EN BIT(5) -+#define SENSOR3_EN BIT(6) -+#define SENSOR4_EN BIT(7) -+#define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \ -+ SENSOR2_EN | SENSOR3_EN | SENSOR4_EN) -+#define TSENS_8064_SENSOR5_EN BIT(8) -+#define TSENS_8064_SENSOR6_EN BIT(9) -+#define TSENS_8064_SENSOR7_EN BIT(10) -+#define TSENS_8064_SENSOR8_EN BIT(11) -+#define TSENS_8064_SENSOR9_EN BIT(12) -+#define TSENS_8064_SENSOR10_EN BIT(13) -+#define TSENS_8064_SENSORS_EN (SENSORS_EN | \ -+ TSENS_8064_SENSOR5_EN | \ -+ TSENS_8064_SENSOR6_EN | \ -+ TSENS_8064_SENSOR7_EN | \ -+ TSENS_8064_SENSOR8_EN | \ -+ TSENS_8064_SENSOR9_EN | \ -+ TSENS_8064_SENSOR10_EN) -+ -+#define TSENS_8064_SEQ_SENSORS 5 -+#define TSENS_8064_S4_S5_OFFSET 40 -+#define TSENS_FACTOR 1 -+ -+/* Trips: from very hot to very cold */ -+enum tsens_trip_type { -+ TSENS_TRIP_STAGE3 = 0, -+ TSENS_TRIP_STAGE2, -+ TSENS_TRIP_STAGE1, -+ TSENS_TRIP_STAGE0, -+ TSENS_TRIP_NUM, -+}; -+ -+u32 tsens_8064_slope[] = { -+ 1176, 1176, 1154, 1176, -+ 1111, 1132, 1132, 1199, -+ 1132, 1199, 1132 -+ }; -+ -+/* Temperature on y axis and ADC-code on x-axis */ -+static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s) -+{ -+ int degcbeforefactor, degc; -+ -+ degcbeforefactor = (adc_code * s->slope) + s->offset; -+ -+ if (degcbeforefactor == 0) -+ degc = degcbeforefactor; -+ else if (degcbeforefactor > 0) -+ degc = (degcbeforefactor + TSENS_FACTOR/2) -+ / TSENS_FACTOR; -+ else -+ degc = (degcbeforefactor - TSENS_FACTOR/2) -+ / TSENS_FACTOR; -+ -+ return degc; -+} -+ -+static int degC_to_code(int degC, const struct tsens_sensor *s) -+{ -+ int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2)) -+ / s->slope; -+ -+ if (code > THRESHOLD_MAX_CODE) -+ code = THRESHOLD_MAX_CODE; -+ else if (code < THRESHOLD_MIN_CODE) -+ code = THRESHOLD_MIN_CODE; -+ return code; -+} -+ -+static int suspend_ipq8064(struct tsens_device *tmdev) -+{ -+ int ret; -+ unsigned int mask; -+ struct regmap *map = tmdev->map; -+ -+ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold); -+ if (ret) -+ return ret; -+ -+ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control); -+ if (ret) -+ return ret; -+ -+ mask = SLP_CLK_ENA | EN; -+ -+ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+static int resume_ipq8064(struct tsens_device *tmdev) -+{ -+ int ret; -+ struct regmap *map = tmdev->map; -+ -+ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); -+ if (ret) -+ return ret; -+ -+ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); -+ if (ret) -+ return ret; -+ -+ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold); -+ if (ret) -+ return ret; -+ -+ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+static void notify_uspace_tsens_fn(struct work_struct *work) -+{ -+ struct tsens_sensor *s = container_of(work, struct tsens_sensor, -+ notify_work); -+ -+ sysfs_notify(&s->tzd->device.kobj, NULL, "type"); -+} -+ -+static void tsens_scheduler_fn(struct work_struct *work) -+{ -+ struct tsens_device *tmdev = container_of(work, struct tsens_device, -+ tsens_work); -+ unsigned int threshold, threshold_low, code, reg, sensor, mask; -+ unsigned int sensor_addr; -+ bool upper_th_x, lower_th_x; -+ int adc_code, ret; -+ -+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®); -+ if (ret) -+ return; -+ reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR; -+ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, reg); -+ if (ret) -+ return; -+ -+ mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR); -+ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &threshold); -+ if (ret) -+ return; -+ threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK) -+ >> THRESHOLD_LOWER_LIMIT_SHIFT; -+ threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK) -+ >> THRESHOLD_UPPER_LIMIT_SHIFT; -+ -+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®); -+ if (ret) -+ return; -+ -+ ret = regmap_read(tmdev->map, CNTL_ADDR, &sensor); -+ if (ret) -+ return; -+ sensor &= (uint32_t) TSENS_8064_SENSORS_EN; -+ sensor >>= SENSOR0_SHIFT; -+ -+ /* Constraint: There is only 1 interrupt control register for all -+ * 11 temperature sensor. So monitoring more than 1 sensor based -+ * on interrupts will yield inconsistent result. To overcome this -+ * issue we will monitor only sensor 0 which is the master sensor. -+ */ -+ -+ /* Skip if the sensor is disabled */ -+ if (sensor & 1) { -+ ret = regmap_read(tmdev->map, tmdev->sensor[0].status, &code); -+ if (ret) -+ return; -+ upper_th_x = code >= threshold; -+ lower_th_x = code <= threshold_low; -+ if (upper_th_x) -+ mask |= UPPER_STATUS_CLR; -+ if (lower_th_x) -+ mask |= LOWER_STATUS_CLR; -+ if (upper_th_x || lower_th_x) { -+ /* Notify user space */ -+ schedule_work(&tmdev->sensor[0].notify_work); -+ regmap_read(tmdev->map, sensor_addr, &adc_code); -+ pr_debug("Trigger (%d degrees) for sensor %d\n", -+ code_to_degC(adc_code, &tmdev->sensor[0]), 0); -+ } -+ } -+ regmap_write(tmdev->map, STATUS_CNTL_8064, reg & mask); -+ -+ /* force memory to sync */ -+ mb(); -+} -+ -+static irqreturn_t tsens_isr(int irq, void *data) -+{ -+ struct tsens_device *tmdev = data; -+ -+ schedule_work(&tmdev->tsens_work); -+ return IRQ_HANDLED; -+} -+ -+static void hw_init(struct tsens_device *tmdev) -+{ -+ int ret; -+ unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0; -+ unsigned int reg_status_cntl = 0; -+ -+ regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); -+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl | TSENS_SW_RST); -+ -+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18) -+ | (((1 << tmdev->num_sensors) - 1) << SENSOR0_SHIFT); -+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); -+ regmap_read(tmdev->map, STATUS_CNTL_8064, ®_status_cntl); -+ reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR -+ | MIN_STATUS_MASK | MAX_STATUS_MASK; -+ regmap_write(tmdev->map, STATUS_CNTL_8064, reg_status_cntl); -+ reg_cntl |= TSENS_EN; -+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); -+ -+ regmap_read(tmdev->map, CONFIG_ADDR, ®_cfg); -+ reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT); -+ regmap_write(tmdev->map, CONFIG_ADDR, reg_cfg); -+ -+ reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT) -+ | (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT) -+ | (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT) -+ | (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT); -+ -+ regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr); -+ -+ ret = devm_request_irq(tmdev->dev, tmdev->tsens_irq, tsens_isr, -+ IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev); -+ if (ret < 0) { -+ pr_err("%s: request_irq FAIL: %d\n", __func__, ret); -+ return; -+ } -+ -+ INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn); -+} -+ -+static int init_ipq8064(struct tsens_device *tmdev) -+{ -+ int ret, i; -+ u32 reg_cntl, offset = 0; -+ -+ init_common(tmdev); -+ if (!tmdev->map) -+ return -ENODEV; -+ -+ /* -+ * The status registers for each sensor are discontiguous -+ * because some SoCs have 5 sensors while others have more -+ * but the control registers stay in the same place, i.e -+ * directly after the first 5 status registers. -+ */ -+ for (i = 0; i < tmdev->num_sensors; i++) { -+ if (i >= TSENS_8064_SEQ_SENSORS) -+ offset = TSENS_8064_S4_S5_OFFSET; -+ -+ tmdev->sensor[i].status = S0_STATUS_ADDR + offset -+ + (i << STATUS_ADDR_OFFSET); -+ tmdev->sensor[i].slope = tsens_8064_slope[i]; -+ INIT_WORK(&tmdev->sensor[i].notify_work, -+ notify_uspace_tsens_fn); -+ } -+ -+ reg_cntl = SW_RST; -+ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); -+ if (ret) -+ return ret; -+ -+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); -+ reg_cntl &= ~SW_RST; -+ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR, -+ CONFIG_MASK, CONFIG); -+ -+ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; -+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); -+ if (ret) -+ return ret; -+ -+ reg_cntl |= EN; -+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+static int calibrate_ipq8064(struct tsens_device *tmdev) -+{ -+ int i; -+ char *data, *data_backup; -+ -+ ssize_t num_read = tmdev->num_sensors; -+ struct tsens_sensor *s = tmdev->sensor; -+ -+ data = qfprom_read(tmdev->dev, "calib"); -+ if (IS_ERR(data)) { -+ pr_err("Calibration not found.\n"); -+ return PTR_ERR(data); -+ } -+ -+ data_backup = qfprom_read(tmdev->dev, "calib_backup"); -+ if (IS_ERR(data_backup)) { -+ pr_err("Backup calibration not found.\n"); -+ return PTR_ERR(data_backup); -+ } -+ -+ for (i = 0; i < num_read; i++) { -+ s[i].calib_data = readb_relaxed(data + i); -+ s[i].calib_data_backup = readb_relaxed(data_backup + i); -+ -+ if (s[i].calib_data_backup) -+ s[i].calib_data = s[i].calib_data_backup; -+ if (!s[i].calib_data) { -+ pr_err("QFPROM TSENS calibration data not present\n"); -+ return -ENODEV; -+ } -+ s[i].slope = tsens_8064_slope[i]; -+ s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope); -+ } -+ -+ hw_init(tmdev); -+ -+ return 0; -+} -+ -+static int get_temp_ipq8064(struct tsens_device *tmdev, int id, int *temp) -+{ -+ int ret; -+ u32 code, trdy; -+ const struct tsens_sensor *s = &tmdev->sensor[id]; -+ unsigned long timeout; -+ -+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); -+ do { -+ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy); -+ if (ret) -+ return ret; -+ if (!(trdy & TRDY_MASK)) -+ continue; -+ ret = regmap_read(tmdev->map, s->status, &code); -+ if (ret) -+ return ret; -+ *temp = code_to_degC(code, s); -+ return 0; -+ } while (time_before(jiffies, timeout)); -+ -+ return -ETIMEDOUT; -+} -+ -+static int set_trip_temp_ipq8064(void *data, int trip, int temp) -+{ -+ unsigned int reg_th, reg_cntl; -+ int ret, code, code_chk, hi_code, lo_code; -+ const struct tsens_sensor *s = data; -+ struct tsens_device *tmdev = s->tmdev; -+ -+ code_chk = code = degC_to_code(temp, s); -+ -+ if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE) -+ return -EINVAL; -+ -+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®_cntl); -+ if (ret) -+ return ret; -+ -+ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, ®_th); -+ if (ret) -+ return ret; -+ -+ hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK) -+ >> THRESHOLD_UPPER_LIMIT_SHIFT; -+ lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK) -+ >> THRESHOLD_LOWER_LIMIT_SHIFT; -+ -+ switch (trip) { -+ case TSENS_TRIP_STAGE3: -+ code <<= THRESHOLD_MAX_LIMIT_SHIFT; -+ reg_th &= ~THRESHOLD_MAX_LIMIT_MASK; -+ break; -+ case TSENS_TRIP_STAGE2: -+ if (code_chk <= lo_code) -+ return -EINVAL; -+ code <<= THRESHOLD_UPPER_LIMIT_SHIFT; -+ reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK; -+ break; -+ case TSENS_TRIP_STAGE1: -+ if (code_chk >= hi_code) -+ return -EINVAL; -+ code <<= THRESHOLD_LOWER_LIMIT_SHIFT; -+ reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK; -+ break; -+ case TSENS_TRIP_STAGE0: -+ code <<= THRESHOLD_MIN_LIMIT_SHIFT; -+ reg_th &= ~THRESHOLD_MIN_LIMIT_MASK; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ ret = regmap_write(tmdev->map, THRESHOLD_ADDR, reg_th | code); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+static int set_trip_activate_ipq8064(void *data, int trip, -+ enum thermal_trip_activation_mode mode) -+{ -+ unsigned int reg_cntl, mask, val; -+ const struct tsens_sensor *s = data; -+ struct tsens_device *tmdev = s->tmdev; -+ int ret; -+ -+ if (!tmdev || trip < 0) -+ return -EINVAL; -+ -+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®_cntl); -+ if (ret) -+ return ret; -+ -+ switch (trip) { -+ case TSENS_TRIP_STAGE3: -+ mask = MAX_STATUS_MASK; -+ break; -+ case TSENS_TRIP_STAGE2: -+ mask = UPPER_STATUS_CLR; -+ break; -+ case TSENS_TRIP_STAGE1: -+ mask = LOWER_STATUS_CLR; -+ break; -+ case TSENS_TRIP_STAGE0: -+ mask = MIN_STATUS_MASK; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (mode == THERMAL_TRIP_ACTIVATION_DISABLED) -+ val = reg_cntl | mask; -+ else -+ val = reg_cntl & ~mask; -+ -+ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, val); -+ if (ret) -+ return ret; -+ -+ /* force memory to sync */ -+ mb(); -+ return 0; -+} -+ -+const struct tsens_ops ops_ipq8064 = { -+ .init = init_ipq8064, -+ .calibrate = calibrate_ipq8064, -+ .get_temp = get_temp_ipq8064, -+ .suspend = suspend_ipq8064, -+ .resume = resume_ipq8064, -+ .set_trip_temp = set_trip_temp_ipq8064, -+ .set_trip_activate = set_trip_activate_ipq8064, -+}; -+ -+const struct tsens_data data_ipq8064 = { -+ .num_sensors = 11, -+ .ops = &ops_ipq8064, -+}; ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -72,6 +72,9 @@ static const struct of_device_id tsens_t - }, { - .compatible = "qcom,msm8996-tsens", - .data = &data_8996, -+ }, { -+ .compatible = "qcom,ipq8064-tsens", -+ .data = &data_ipq8064, - }, - {} - }; ---- a/drivers/thermal/qcom/tsens.h -+++ b/drivers/thermal/qcom/tsens.h -@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen - int init_common(struct tsens_device *); - int get_temp_common(struct tsens_device *, int, int *); - --extern const struct tsens_data data_8916, data_8974, data_8960, data_8996; -+extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064; - - #endif /* __QCOM_TSENS_H__ */ diff --git a/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch b/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch deleted file mode 100644 index 944d1e575b..0000000000 --- a/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch +++ /dev/null @@ -1,453 +0,0 @@ -From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001 -From: Rajith Cherian -Date: Wed, 1 Feb 2017 19:00:26 +0530 -Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts - -Provide support for adding configurable high and -configurable low trip temperatures. An interrupts is -also triggerred when these trip points are hit. The -interrupts can be activated or deactivated from sysfs. -This functionality is made available only if -CONFIG_THERMAL_WRITABLE_TRIPS is defined. - -Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934 -Signed-off-by: Rajith Cherian ---- - .../devicetree/bindings/thermal/qcom-tsens.txt | 4 ++ - drivers/thermal/of-thermal.c | 63 ++++++++++++++++++---- - drivers/thermal/qcom/tsens.c | 43 ++++++++++++--- - drivers/thermal/qcom/tsens.h | 11 ++++ - drivers/thermal/thermal_core.c | 44 ++++++++++++++- - include/linux/thermal.h | 14 +++++ - 6 files changed, 162 insertions(+), 17 deletions(-) - ---- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt -+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt -@@ -12,11 +12,15 @@ Required properties: - - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify - nvmem cells - -+Optional properties: -+- interrupts: Interrupt which gets triggered when threshold is hit -+ - Example: - tsens: thermal-sensor@900000 { - compatible = "qcom,msm8916-tsens"; - reg = <0x4a8000 0x2000>; - nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "caldata", "calsel"; -+ interrupts = <0 178 0>; - #thermal-sensor-cells = <1>; - }; ---- a/drivers/thermal/of-thermal.c -+++ b/drivers/thermal/of-thermal.c -@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th - { - struct __thermal_zone *data = tz->devdata; - -- if (!data->ops->get_temp) -+ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED)) - return -EINVAL; - - return data->ops->get_temp(data->sensor_data, temp); -@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t - { - struct __thermal_zone *data = tz->devdata; - -- if (!data->ops || !data->ops->set_trips) -+ if (!data->ops || !data->ops->set_trips -+ || (data->mode == THERMAL_DEVICE_DISABLED)) - return -EINVAL; - - return data->ops->set_trips(data->sensor_data, low, high); -@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru - { - struct __thermal_zone *data = tz->devdata; - -+ if (data->mode == THERMAL_DEVICE_DISABLED) -+ return -EINVAL; -+ - return data->ops->set_emul_temp(data->sensor_data, temp); - } - -@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t - { - struct __thermal_zone *data = tz->devdata; - -- if (!data->ops->get_trend) -+ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED)) - return -EINVAL; - - return data->ops->get_trend(data->sensor_data, trip, trend); -@@ -289,7 +293,9 @@ static int of_thermal_set_mode(struct th - mutex_unlock(&tz->lock); - - data->mode = mode; -- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); -+ -+ if (mode == THERMAL_DEVICE_ENABLED) -+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); - - return 0; - } -@@ -299,7 +305,8 @@ static int of_thermal_get_trip_type(stru - { - struct __thermal_zone *data = tz->devdata; - -- if (trip >= data->ntrips || trip < 0) -+ if (trip >= data->ntrips || trip < 0 -+ || (data->mode == THERMAL_DEVICE_DISABLED)) - return -EDOM; - - *type = data->trips[trip].type; -@@ -307,12 +314,39 @@ static int of_thermal_get_trip_type(stru - return 0; - } - -+static int of_thermal_activate_trip_type(struct thermal_zone_device *tz, -+ int trip, enum thermal_trip_activation_mode mode) -+{ -+ struct __thermal_zone *data = tz->devdata; -+ -+ if (trip >= data->ntrips || trip < 0 -+ || (data->mode == THERMAL_DEVICE_DISABLED)) -+ return -EDOM; -+ -+ /* -+ * The configurable_hi and configurable_lo trip points can be -+ * activated and deactivated. -+ */ -+ -+ if (data->ops->set_trip_activate) { -+ int ret; -+ -+ ret = data->ops->set_trip_activate(data->sensor_data, -+ trip, mode); -+ if (ret) -+ return ret; -+ } -+ -+ return 0; -+} -+ - static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip, - int *temp) - { - struct __thermal_zone *data = tz->devdata; - -- if (trip >= data->ntrips || trip < 0) -+ if (trip >= data->ntrips || trip < 0 -+ || (data->mode == THERMAL_DEVICE_DISABLED)) - return -EDOM; - - *temp = data->trips[trip].temperature; -@@ -325,7 +359,8 @@ static int of_thermal_set_trip_temp(stru - { - struct __thermal_zone *data = tz->devdata; - -- if (trip >= data->ntrips || trip < 0) -+ if (trip >= data->ntrips || trip < 0 -+ || (data->mode == THERMAL_DEVICE_DISABLED)) - return -EDOM; - - if (data->ops->set_trip_temp) { -@@ -347,7 +382,8 @@ static int of_thermal_get_trip_hyst(stru - { - struct __thermal_zone *data = tz->devdata; - -- if (trip >= data->ntrips || trip < 0) -+ if (trip >= data->ntrips || trip < 0 -+ || (data->mode == THERMAL_DEVICE_DISABLED)) - return -EDOM; - - *hyst = data->trips[trip].hysteresis; -@@ -360,7 +396,8 @@ static int of_thermal_set_trip_hyst(stru - { - struct __thermal_zone *data = tz->devdata; - -- if (trip >= data->ntrips || trip < 0) -+ if (trip >= data->ntrips || trip < 0 -+ || (data->mode == THERMAL_DEVICE_DISABLED)) - return -EDOM; - - /* thermal framework should take care of data->mask & (1 << trip) */ -@@ -435,6 +472,9 @@ thermal_zone_of_add_sensor(struct device - if (ops->set_emul_temp) - tzd->ops->set_emul_temp = of_thermal_set_emul_temp; - -+ if (ops->set_trip_activate) -+ tzd->ops->set_trip_activate = of_thermal_activate_trip_type; -+ - mutex_unlock(&tzd->lock); - - return tzd; -@@ -729,7 +769,10 @@ static const char * const trip_types[] = - [THERMAL_TRIP_ACTIVE] = "active", - [THERMAL_TRIP_PASSIVE] = "passive", - [THERMAL_TRIP_HOT] = "hot", -- [THERMAL_TRIP_CRITICAL] = "critical", -+ [THERMAL_TRIP_CRITICAL] = "critical_high", -+ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi", -+ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo", -+ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low", - }; - - /** ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in - - static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend) - { -- const struct tsens_sensor *s = p; -+ struct tsens_sensor *s = p; - struct tsens_device *tmdev = s->tmdev; - - if (tmdev->ops->get_trend) -@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int - return -ENOTSUPP; - } - --static int __maybe_unused tsens_suspend(struct device *dev) -+static int __maybe_unused tsens_suspend(void *data) - { -- struct tsens_device *tmdev = dev_get_drvdata(dev); -+ struct tsens_sensor *s = data; -+ struct tsens_device *tmdev = s->tmdev; - - if (tmdev->ops && tmdev->ops->suspend) - return tmdev->ops->suspend(tmdev); -@@ -50,9 +51,10 @@ static int __maybe_unused tsens_suspend - return 0; - } - --static int __maybe_unused tsens_resume(struct device *dev) -+static int __maybe_unused tsens_resume(void *data) - { -- struct tsens_device *tmdev = dev_get_drvdata(dev); -+ struct tsens_sensor *s = data; -+ struct tsens_device *tmdev = s->tmdev; - - if (tmdev->ops && tmdev->ops->resume) - return tmdev->ops->resume(tmdev); -@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s - return 0; - } - -+static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp) -+{ -+ struct tsens_sensor *s = data; -+ struct tsens_device *tmdev = s->tmdev; -+ -+ if (tmdev->ops && tmdev->ops->set_trip_temp) -+ return tmdev->ops->set_trip_temp(s, trip, temp); -+ -+ return 0; -+} -+ -+static int __maybe_unused tsens_activate_trip_type(void *data, int trip, -+ enum thermal_trip_activation_mode mode) -+{ -+ struct tsens_sensor *s = data; -+ struct tsens_device *tmdev = s->tmdev; -+ -+ if (tmdev->ops && tmdev->ops->set_trip_activate) -+ return tmdev->ops->set_trip_activate(s, trip, mode); -+ -+ return 0; -+} -+ -+ - static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); - - static const struct of_device_id tsens_table[] = { -@@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table); - static const struct thermal_zone_of_device_ops tsens_of_ops = { - .get_temp = tsens_get_temp, - .get_trend = tsens_get_trend, -+ .set_trip_temp = tsens_set_trip_temp, -+ .set_trip_activate = tsens_activate_trip_type, - }; - - static int tsens_register(struct tsens_device *tmdev) -@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d - if (id) - data = id->data; - else -- data = &data_8960; -+ return -EINVAL; - - if (data->num_sensors <= 0) { - dev_err(dev, "invalid number of sensors\n"); -@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d - tmdev->dev = dev; - tmdev->num_sensors = data->num_sensors; - tmdev->ops = data->ops; -+ -+ tmdev->tsens_irq = platform_get_irq(pdev, 0); -+ - for (i = 0; i < tmdev->num_sensors; i++) { - if (data->hw_ids) - tmdev->sensor[i].hw_id = data->hw_ids[i]; ---- a/drivers/thermal/qcom/tsens.h -+++ b/drivers/thermal/qcom/tsens.h -@@ -24,9 +24,12 @@ struct tsens_device; - struct tsens_sensor { - struct tsens_device *tmdev; - struct thermal_zone_device *tzd; -+ struct work_struct notify_work; - int offset; - int id; - int hw_id; -+ int calib_data; -+ int calib_data_backup; - int slope; - u32 status; - }; -@@ -41,6 +44,9 @@ struct tsens_sensor { - * @suspend: Function to suspend the tsens device - * @resume: Function to resume the tsens device - * @get_trend: Function to get the thermal/temp trend -+ * @set_trip_temp: Function to set trip temp -+ * @get_trip_temp: Function to get trip temp -+ * @set_trip_activate: Function to activate trip points - */ - struct tsens_ops { - /* mandatory callbacks */ -@@ -53,6 +59,9 @@ struct tsens_ops { - int (*suspend)(struct tsens_device *); - int (*resume)(struct tsens_device *); - int (*get_trend)(struct tsens_device *, int, enum thermal_trend *); -+ int (*set_trip_temp)(void *, int, int); -+ int (*set_trip_activate)(void *, int, -+ enum thermal_trip_activation_mode); - }; - - /** -@@ -76,11 +85,13 @@ struct tsens_context { - struct tsens_device { - struct device *dev; - u32 num_sensors; -+ u32 tsens_irq; - struct regmap *map; - struct regmap_field *status_field; - struct tsens_context ctx; - bool trdy; - const struct tsens_ops *ops; -+ struct work_struct tsens_work; - struct tsens_sensor sensor[0]; - }; - ---- a/drivers/thermal/thermal_sysfs.c -+++ b/drivers/thermal/thermal_sysfs.c -@@ -115,12 +115,48 @@ trip_point_type_show(struct device *dev, - return sprintf(buf, "passive\n"); - case THERMAL_TRIP_ACTIVE: - return sprintf(buf, "active\n"); -+ case THERMAL_TRIP_CONFIGURABLE_HI: -+ return sprintf(buf, "configurable_hi\n"); -+ case THERMAL_TRIP_CONFIGURABLE_LOW: -+ return sprintf(buf, "configurable_low\n"); -+ case THERMAL_TRIP_CRITICAL_LOW: -+ return sprintf(buf, "critical_low\n"); - default: - return sprintf(buf, "unknown\n"); - } - } - - static ssize_t -+trip_point_type_activate(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct thermal_zone_device *tz = to_thermal_zone(dev); -+ int trip, ret; -+ char *enabled = "enabled"; -+ char *disabled = "disabled"; -+ -+ if (!tz->ops->set_trip_activate) -+ return -EPERM; -+ -+ if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip)) -+ return -EINVAL; -+ -+ if (!strncmp(buf, enabled, strlen(enabled))) -+ ret = tz->ops->set_trip_activate(tz, trip, -+ THERMAL_TRIP_ACTIVATION_ENABLED); -+ else if (!strncmp(buf, disabled, strlen(disabled))) -+ ret = tz->ops->set_trip_activate(tz, trip, -+ THERMAL_TRIP_ACTIVATION_DISABLED); -+ else -+ ret = -EINVAL; -+ -+ if (ret) -+ return ret; -+ -+ return count; -+} -+ -+static ssize_t - trip_point_temp_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) - { -@@ -562,6 +598,12 @@ static int create_trip_attrs(struct ther - tz->trip_type_attrs[indx].attr.show = trip_point_type_show; - attrs[indx] = &tz->trip_type_attrs[indx].attr.attr; - -+ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) { -+ tz->trip_type_attrs[indx].attr.store -+ = trip_point_type_activate; -+ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR; -+ } -+ - /* create trip temp attribute */ - snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH, - "trip_point_%d_temp", indx); ---- a/include/linux/thermal.h -+++ b/include/linux/thermal.h -@@ -78,11 +78,19 @@ enum thermal_device_mode { - THERMAL_DEVICE_ENABLED, - }; - -+enum thermal_trip_activation_mode { -+ THERMAL_TRIP_ACTIVATION_DISABLED = 0, -+ THERMAL_TRIP_ACTIVATION_ENABLED, -+}; -+ - enum thermal_trip_type { - THERMAL_TRIP_ACTIVE = 0, - THERMAL_TRIP_PASSIVE, - THERMAL_TRIP_HOT, - THERMAL_TRIP_CRITICAL, -+ THERMAL_TRIP_CONFIGURABLE_HI, -+ THERMAL_TRIP_CONFIGURABLE_LOW, -+ THERMAL_TRIP_CRITICAL_LOW, - }; - - enum thermal_trend { -@@ -120,6 +128,8 @@ struct thermal_zone_device_ops { - enum thermal_trip_type *); - int (*get_trip_temp) (struct thermal_zone_device *, int, int *); - int (*set_trip_temp) (struct thermal_zone_device *, int, int); -+ int (*set_trip_activate) (struct thermal_zone_device *, int, -+ enum thermal_trip_activation_mode); - int (*get_trip_hyst) (struct thermal_zone_device *, int, int *); - int (*set_trip_hyst) (struct thermal_zone_device *, int, int); - int (*get_crit_temp) (struct thermal_zone_device *, int *); -@@ -363,6 +373,8 @@ struct thermal_genl_event { - * temperature. - * @set_trip_temp: a pointer to a function that sets the trip temperature on - * hardware. -+ * @activate_trip_type: a pointer to a function to enable/disable trip -+ * temperature interrupts - */ - struct thermal_zone_of_device_ops { - int (*get_temp)(void *, int *); -@@ -370,6 +382,8 @@ struct thermal_zone_of_device_ops { - int (*set_trips)(void *, int, int); - int (*set_emul_temp)(void *, int); - int (*set_trip_temp)(void *, int, int); -+ int (*set_trip_activate)(void *, int, -+ enum thermal_trip_activation_mode); - }; - - /** diff --git a/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch b/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch deleted file mode 100644 index 167278a701..0000000000 --- a/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch +++ /dev/null @@ -1,93 +0,0 @@ -From d30840e2b1cf79d90392e6051b0c0b6006d29d8b Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 9 Mar 2017 09:32:40 +0100 -Subject: [PATCH 64/69] clk: clk-rpm fixes - -Signed-off-by: John Crispin ---- - .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 + - drivers/clk/qcom/clk-rpm.c | 35 ++++++++++++++++++++++ - include/dt-bindings/clock/qcom,rpmcc.h | 4 +++ - 3 files changed, 40 insertions(+) - ---- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt -+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt -@@ -13,6 +13,7 @@ Required properties : - "qcom,rpmcc-msm8916", "qcom,rpmcc" - "qcom,rpmcc-msm8974", "qcom,rpmcc" - "qcom,rpmcc-apq8064", "qcom,rpmcc" -+ "qcom,rpmcc-ipq806x", "qcom,rpmcc" - - - #clock-cells : shall contain 1 - ---- a/drivers/clk/qcom/clk-rpm.c -+++ b/drivers/clk/qcom/clk-rpm.c -@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a - DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); - DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK); - -+/* ipq806x */ -+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK); -+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK); -+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK); -+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK); -+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK); -+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); -+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK); -+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK); -+ - static struct clk_rpm *apq8064_clks[] = { - [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk, - [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk, -@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] = - [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk, - }; - -+static struct clk_rpm *ipq806x_clks[] = { -+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk, -+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk, -+ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk, -+ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk, -+ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk, -+ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk, -+ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk, -+ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk, -+ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk, -+ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk, -+ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk, -+ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk, -+ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk, -+ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk, -+ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk, -+ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk, -+}; -+ - static const struct rpm_clk_desc rpm_clk_apq8064 = { - .clks = apq8064_clks, - .num_clks = ARRAY_SIZE(apq8064_clks), - }; - -+static const struct rpm_clk_desc rpm_clk_ipq806x = { -+ .clks = ipq806x_clks, -+ .num_clks = ARRAY_SIZE(ipq806x_clks), -+}; -+ - static const struct of_device_id rpm_clk_match_table[] = { - { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 }, -+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x }, - { } - }; - MODULE_DEVICE_TABLE(of, rpm_clk_match_table); ---- a/include/dt-bindings/clock/qcom,rpmcc.h -+++ b/include/dt-bindings/clock/qcom,rpmcc.h -@@ -37,6 +37,10 @@ - #define RPM_SYS_FABRIC_A_CLK 19 - #define RPM_SFPB_CLK 20 - #define RPM_SFPB_A_CLK 21 -+#define RPM_NSS_FABRIC_0_CLK 22 -+#define RPM_NSS_FABRIC_0_A_CLK 23 -+#define RPM_NSS_FABRIC_1_CLK 24 -+#define RPM_NSS_FABRIC_1_A_CLK 25 - - /* SMD RPM clocks */ - #define RPM_SMD_XO_CLK_SRC 0 diff --git a/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch deleted file mode 100644 index 0d2a4274c7..0000000000 --- a/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 9 Mar 2017 09:33:32 +0100 -Subject: [PATCH 65/69] arm: override compiler flags - -Signed-off-by: John Crispin ---- - arch/arm/Makefile | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -67,7 +67,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i - # macro, but instead defines a whole series of macros which makes - # testing for a specific architecture or later rather impossible. - arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m --arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) -+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15 - arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) - # Only override the compiler option if ARMv6. The ARMv6K extensions are - # always available in ARMv7 diff --git a/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch deleted file mode 100644 index f0cc3ed509..0000000000 --- a/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch +++ /dev/null @@ -1,189 +0,0 @@ -From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 -From: Adrian Panella -Date: Thu, 9 Mar 2017 09:37:17 +0100 -Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments - -The command-line arguments provided by the boot loader will be -appended to a new device tree property: bootloader-args. -If there is a property "append-rootblock" in DT under /chosen -and a root= option in bootloaders command line it will be parsed -and added to DT bootargs with the form: XX. -Only command line ATAG will be processed, the rest of the ATAGs -sent by bootloader will be ignored. -This is usefull in dual boot systems, to get the current root partition -without afecting the rest of the system. - -Signed-off-by: Adrian Panella ---- - arch/arm/Kconfig | 11 +++++ - arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- - init/main.c | 16 ++++++++ - 3 files changed, 98 insertions(+), 1 deletion(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN - The command-line arguments provided by the boot loader will be - appended to the the device tree bootargs property. - -+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ bool "Append rootblock parsing bootloader's kernel arguments" -+ help -+ The command-line arguments provided by the boot loader will be -+ appended to a new device tree property: bootloader-args. -+ If there is a property "append-rootblock" in DT under /chosen -+ and a root= option in bootloaders command line it will be parsed -+ and added to DT bootargs with the form: XX. -+ Only command line ATAG will be processed, the rest of the ATAGs -+ sent by bootloader will be ignored. -+ - endchoice - - config CMDLINE ---- a/arch/arm/boot/compressed/atags_to_fdt.c -+++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -4,6 +4,8 @@ - - #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) - #define do_extend_cmdline 1 -+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#define do_extend_cmdline 1 - #else - #define do_extend_cmdline 0 - #endif -@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void - return cell_size; - } - -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ -+static char *append_rootblock(char *dest, const char *str, int len, void *fdt) -+{ -+ char *ptr, *end; -+ char *root="root="; -+ int i, l; -+ const char *rootblock; -+ -+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually -+ ptr = str - 1; -+ -+ do { -+ //first find an 'r' at the begining or after a space -+ do { -+ ptr++; -+ ptr = strchr(ptr, 'r'); -+ if(!ptr) return dest; -+ -+ } while (ptr != str && *(ptr-1) != ' '); -+ -+ //then check for the rest -+ for(i = 1; i <= 4; i++) -+ if(*(ptr+i) != *(root+i)) break; -+ -+ } while (i != 5); -+ -+ end = strchr(ptr, ' '); -+ end = end ? (end - 1) : (strchr(ptr, 0) - 1); -+ -+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX ) -+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); -+ ptr = end + 1; -+ -+ /* if append-rootblock property is set use it to append to command line */ -+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); -+ if(rootblock != NULL) { -+ if(*dest != ' ') { -+ *dest = ' '; -+ dest++; -+ len++; -+ } -+ if (len + l + i <= COMMAND_LINE_SIZE) { -+ memcpy(dest, rootblock, l); -+ dest += l - 1; -+ memcpy(dest, ptr, i); -+ dest += i; -+ } -+ } -+ return dest; -+} -+#endif -+ - static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) - { - char cmdline[COMMAND_LINE_SIZE]; -@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt - - /* and append the ATAG_CMDLINE */ - if (fdt_cmdline) { -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //save original bootloader args -+ //and append ubi.mtd with root partition number to current cmdline -+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); -+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); -+ -+#else - len = strlen(fdt_cmdline); - if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { - *ptr++ = ' '; - memcpy(ptr, fdt_cmdline, len); - ptr += len; - } -+#endif - } - *ptr = '\0'; - -@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void * - else - setprop_string(fdt, "/chosen", "bootargs", - atag->u.cmdline.cmdline); -- } else if (atag->hdr.tag == ATAG_MEM) { -+ } -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ else if (atag->hdr.tag == ATAG_MEM) { - if (memcount >= sizeof(mem_reg_property)/4) - continue; - if (!atag->u.mem.size) -@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void * - setprop(fdt, "/memory", "reg", mem_reg_property, - 4 * memcount * memsize); - } -+#else -+ -+ } -+#endif - - return fdt_pack(fdt); - } ---- a/init/main.c -+++ b/init/main.c -@@ -95,6 +95,10 @@ - #include - #include - -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#include -+#endif -+ - static int kernel_init(void *); - - extern void init_IRQ(void); -@@ -573,6 +577,18 @@ asmlinkage __visible void __init start_k - page_alloc_init(); - - pr_notice("Kernel command line: %s\n", boot_command_line); -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //Show bootloader's original command line for reference -+ if(of_chosen) { -+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); -+ if(prop) -+ pr_notice("Bootloader command line (ignored): %s\n", prop); -+ else -+ pr_notice("Bootloader command line not present\n"); -+ } -+#endif -+ - /* parameters may set static keys */ - jump_label_init(); - parse_early_param(); diff --git a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch deleted file mode 100644 index e11378b42a..0000000000 --- a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 9 Mar 2017 11:03:18 +0100 -Subject: [PATCH 69/69] arm: boot: add dts files - -Signed-off-by: John Crispin ---- - arch/arm/boot/dts/Makefile | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -699,6 +699,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8084-mtp.dtb \ - qcom-ipq4019-ap.dk01.1-c1.dtb \ - qcom-ipq8064-ap148.dtb \ -+ qcom-ipq8064-c2600.dtb \ -+ qcom-ipq8064-d7800.dtb \ -+ qcom-ipq8064-db149.dtb \ -+ qcom-ipq8064-ap161.dtb \ -+ qcom-ipq8064-ea8500.dtb \ -+ qcom-ipq8064-r7500.dtb \ -+ qcom-ipq8064-r7500v2.dtb \ -+ qcom-ipq8064-wg2600hp.dtb \ -+ qcom-ipq8064-wpq864.dtb \ -+ qcom-ipq8064-wxr-2533dhp.dtb \ -+ qcom-ipq8065-nbg6817.dtb \ -+ qcom-ipq8065-r7800.dtb \ - qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch b/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch deleted file mode 100644 index b7e375dfb2..0000000000 --- a/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch +++ /dev/null @@ -1,16 +0,0 @@ -Check for SCM availability before attempting to use SPM - -Signed-off-by: Felix Fietkau - ---- a/drivers/soc/qcom/spm.c -+++ b/drivers/soc/qcom/spm.c -@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru - cpumask_t mask; - bool use_scm_power_down = false; - -+ if (!qcom_scm_is_available()) -+ return -EPROBE_DEFER; -+ - for (i = 0; ; i++) { - state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); - if (!state_node) diff --git a/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch b/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch deleted file mode 100644 index b9f6e33be6..0000000000 --- a/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch +++ /dev/null @@ -1,95 +0,0 @@ -From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001 -From: Sham Muthayyan -Date: Tue, 19 Jul 2016 18:44:49 +0530 -Subject: PCI: qcom: Fixed IPQ806x specific clocks - -Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e -Signed-off-by: Sham Muthayyan ---- - drivers/pci/host/pcie-qcom.c | 38 +++++++++++++++++++++++++++++++++----- - 1 file changed, 33 insertions(+), 5 deletions(-) - ---- a/drivers/pci/dwc/pcie-qcom.c -+++ b/drivers/pci/dwc/pcie-qcom.c -@@ -91,6 +91,8 @@ struct qcom_pcie_resources_2_1_0 { - struct clk *iface_clk; - struct clk *core_clk; - struct clk *phy_clk; -+ struct clk *aux_clk; -+ struct clk *ref_clk; - struct reset_control *pci_reset; - struct reset_control *axi_reset; - struct reset_control *ahb_reset; -@@ -249,6 +251,14 @@ static int qcom_pcie_get_resources_2_1_0 - if (IS_ERR(res->phy_clk)) - return PTR_ERR(res->phy_clk); - -+ res->aux_clk = devm_clk_get(dev, "aux"); -+ if (IS_ERR(res->aux_clk)) -+ return PTR_ERR(res->aux_clk); -+ -+ res->ref_clk = devm_clk_get(dev, "ref"); -+ if (IS_ERR(res->ref_clk)) -+ return PTR_ERR(res->ref_clk); -+ - res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); - if (IS_ERR(res->pci_reset)) - return PTR_ERR(res->pci_reset); -@@ -281,6 +291,8 @@ static void qcom_pcie_deinit_2_1_0(struc - clk_disable_unprepare(res->iface_clk); - clk_disable_unprepare(res->core_clk); - clk_disable_unprepare(res->phy_clk); -+ clk_disable_unprepare(res->aux_clk); -+ clk_disable_unprepare(res->ref_clk); - regulator_disable(res->vdda); - regulator_disable(res->vdda_phy); - regulator_disable(res->vdda_refclk); -@@ -324,16 +336,28 @@ static int qcom_pcie_init_2_1_0(struct q - goto err_assert_ahb; - } - -+ ret = clk_prepare_enable(res->core_clk); -+ if (ret) { -+ dev_err(dev, "cannot prepare/enable core clock\n"); -+ goto err_clk_core; -+ } -+ - ret = clk_prepare_enable(res->phy_clk); - if (ret) { - dev_err(dev, "cannot prepare/enable phy clock\n"); - goto err_clk_phy; - } - -- ret = clk_prepare_enable(res->core_clk); -+ ret = clk_prepare_enable(res->aux_clk); - if (ret) { -- dev_err(dev, "cannot prepare/enable core clock\n"); -- goto err_clk_core; -+ dev_err(dev, "cannot prepare/enable aux clock\n"); -+ goto err_clk_aux; -+ } -+ -+ ret = clk_prepare_enable(res->ref_clk); -+ if (ret) { -+ dev_err(dev, "cannot prepare/enable ref clock\n"); -+ goto err_clk_ref; - } - - ret = reset_control_deassert(res->ahb_reset); -@@ -389,10 +413,14 @@ static int qcom_pcie_init_2_1_0(struct q - return 0; - - err_deassert_ahb: -- clk_disable_unprepare(res->core_clk); --err_clk_core: -+ clk_disable_unprepare(res->ref_clk); -+err_clk_ref: -+ clk_disable_unprepare(res->aux_clk); -+err_clk_aux: - clk_disable_unprepare(res->phy_clk); - err_clk_phy: -+ clk_disable_unprepare(res->core_clk); -+err_clk_core: - clk_disable_unprepare(res->iface_clk); - err_assert_ahb: - regulator_disable(res->vdda_phy); diff --git a/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch b/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch deleted file mode 100644 index 8b9e5ff5d1..0000000000 --- a/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001 -From: Sham Muthayyan -Date: Tue, 19 Jul 2016 18:58:18 +0530 -Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes - -Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321 -Signed-off-by: Sham Muthayyan ---- - drivers/pci/host/pcie-qcom.c | 24 +++++++++++++++++++----- - 1 file changed, 19 insertions(+), 5 deletions(-) - ---- a/drivers/pci/dwc/pcie-qcom.c -+++ b/drivers/pci/dwc/pcie-qcom.c -@@ -98,6 +98,7 @@ struct qcom_pcie_resources_2_1_0 { - struct reset_control *ahb_reset; - struct reset_control *por_reset; - struct reset_control *phy_reset; -+ struct reset_control *ext_reset; - struct regulator *vdda; - struct regulator *vdda_phy; - struct regulator *vdda_refclk; -@@ -275,6 +276,10 @@ static int qcom_pcie_get_resources_2_1_0 - if (IS_ERR(res->por_reset)) - return PTR_ERR(res->por_reset); - -+ res->ext_reset = devm_reset_control_get(dev, "ext"); -+ if (IS_ERR(res->ext_reset)) -+ return PTR_ERR(res->ext_reset); -+ - res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); - return PTR_ERR_OR_ZERO(res->phy_reset); - } -@@ -288,6 +293,7 @@ static void qcom_pcie_deinit_2_1_0(struc - reset_control_assert(res->ahb_reset); - reset_control_assert(res->por_reset); - reset_control_assert(res->pci_reset); -+ reset_control_assert(res->ext_reset); - clk_disable_unprepare(res->iface_clk); - clk_disable_unprepare(res->core_clk); - clk_disable_unprepare(res->phy_clk); -@@ -306,6 +312,12 @@ static int qcom_pcie_init_2_1_0(struct q - u32 val; - int ret; - -+ ret = reset_control_assert(res->ahb_reset); -+ if (ret) { -+ dev_err(dev, "cannot assert ahb reset\n"); -+ return ret; -+ } -+ - ret = regulator_enable(res->vdda); - if (ret) { - dev_err(dev, "cannot enable vdda regulator\n"); -@@ -324,16 +336,16 @@ static int qcom_pcie_init_2_1_0(struct q - goto err_vdda_phy; - } - -- ret = reset_control_assert(res->ahb_reset); -+ ret = reset_control_deassert(res->ext_reset); - if (ret) { -- dev_err(dev, "cannot assert ahb reset\n"); -- goto err_assert_ahb; -+ dev_err(dev, "cannot assert ext reset\n"); -+ goto err_reset_ext; - } - - ret = clk_prepare_enable(res->iface_clk); - if (ret) { - dev_err(dev, "cannot prepare/enable iface clock\n"); -- goto err_assert_ahb; -+ goto err_iface; - } - - ret = clk_prepare_enable(res->core_clk); -@@ -422,7 +434,9 @@ err_clk_phy: - clk_disable_unprepare(res->core_clk); - err_clk_core: - clk_disable_unprepare(res->iface_clk); --err_assert_ahb: -+err_iface: -+ reset_control_assert(res->ext_reset); -+err_reset_ext: - regulator_disable(res->vdda_phy); - err_vdda_phy: - regulator_disable(res->vdda_refclk); diff --git a/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch b/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch deleted file mode 100644 index 57ee082c83..0000000000 --- a/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch +++ /dev/null @@ -1,126 +0,0 @@ -From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001 -From: Sham Muthayyan -Date: Tue, 19 Jul 2016 19:58:22 +0530 -Subject: PCI: qcom: Fixed IPQ806x PCIE init changes - -Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e -Signed-off-by: Sham Muthayyan ---- - drivers/pci/host/pcie-qcom.c | 62 +++++++++++++++++++++++++++++++++++++------- - 1 file changed, 53 insertions(+), 9 deletions(-) - ---- a/drivers/pci/dwc/pcie-qcom.c -+++ b/drivers/pci/dwc/pcie-qcom.c -@@ -52,7 +52,13 @@ - #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10 - - #define PCIE20_PARF_PHY_CTRL 0x40 -+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16) -+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16) -+ - #define PCIE20_PARF_PHY_REFCLK 0x4C -+#define REF_SSP_EN BIT(16) -+#define REF_USE_PAD BIT(12) -+ - #define PCIE20_PARF_DBI_BASE_ADDR 0x168 - #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C - #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 -@@ -83,6 +89,18 @@ - #define DBI_RO_WR_EN 1 - - #define PERST_DELAY_US 1000 -+/* PARF registers */ -+#define PCIE20_PARF_PCS_DEEMPH 0x34 -+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16) -+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8) -+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0) -+ -+#define PCIE20_PARF_PCS_SWING 0x38 -+#define PCS_SWING_TX_SWING_FULL(x) (x << 8) -+#define PCS_SWING_TX_SWING_LOW(x) (x << 0) -+ -+#define PCIE20_PARF_CONFIG_BITS 0x50 -+#define PHY_RX0_EQ(x) (x << 24) - - #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 - #define SLV_ADDR_SPACE_SZ 0x10000000 -@@ -102,6 +120,7 @@ struct qcom_pcie_resources_2_1_0 { - struct regulator *vdda; - struct regulator *vdda_phy; - struct regulator *vdda_refclk; -+ uint8_t phy_tx0_term_offset; - }; - - struct qcom_pcie_resources_1_0_0 { -@@ -179,6 +198,16 @@ struct qcom_pcie { - - #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) - -+static inline void -+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask) -+{ -+ u32 val = readl(addr); -+ -+ val &= ~clear_mask; -+ val |= set_mask; -+ writel(val, addr); -+} -+ - static void qcom_ep_reset_assert(struct qcom_pcie *pcie) - { - gpiod_set_value_cansleep(pcie->reset, 1); -@@ -280,6 +309,10 @@ static int qcom_pcie_get_resources_2_1_0 - if (IS_ERR(res->ext_reset)) - return PTR_ERR(res->ext_reset); - -+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset", -+ &res->phy_tx0_term_offset)) -+ res->phy_tx0_term_offset = 0; -+ - res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); - return PTR_ERR_OR_ZERO(res->phy_reset); - } -@@ -309,7 +342,6 @@ static int qcom_pcie_init_2_1_0(struct q - struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; - struct dw_pcie *pci = pcie->pci; - struct device *dev = pci->dev; -- u32 val; - int ret; - - ret = reset_control_assert(res->ahb_reset); -@@ -378,15 +410,26 @@ static int qcom_pcie_init_2_1_0(struct q - goto err_deassert_ahb; - } - -- /* enable PCIe clocks and resets */ -- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); -- val &= ~BIT(0); -- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); -- -- /* enable external reference clock */ -- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); -- val |= BIT(16); -- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); -+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0); -+ -+ /* Set Tx termination offset */ -+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, -+ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK, -+ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset)); -+ -+ /* PARF programming */ -+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) | -+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) | -+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22), -+ pcie->parf + PCIE20_PARF_PCS_DEEMPH); -+ writel(PCS_SWING_TX_SWING_FULL(0x78) | -+ PCS_SWING_TX_SWING_LOW(0x78), -+ pcie->parf + PCIE20_PARF_PCS_SWING); -+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS); -+ -+ /* Enable reference clock */ -+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, -+ REF_USE_PAD, REF_SSP_EN); - - ret = reset_control_deassert(res->phy_reset); - if (ret) { diff --git a/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch b/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch deleted file mode 100644 index 92100481c8..0000000000 --- a/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch +++ /dev/null @@ -1,114 +0,0 @@ -From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001 -From: Sham Muthayyan -Date: Tue, 26 Jul 2016 12:28:31 +0530 -Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x - -Resolved PCIE EP detection errors caused due to missing iATU programming. - -Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe -Signed-off-by: Sham Muthayyan ---- - drivers/pci/host/pcie-qcom.c | 77 ++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 77 insertions(+) - ---- a/drivers/pci/dwc/pcie-qcom.c -+++ b/drivers/pci/dwc/pcie-qcom.c -@@ -83,6 +83,30 @@ - #define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14) - #define PCIE_CAP_LINK1_VAL 0x2FD7F - -+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10) -+ -+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 -+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c -+ -+#define PCIE20_PLR_IATU_VIEWPORT 0x900 -+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31) -+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0) -+ -+#define PCIE20_PLR_IATU_CTRL1 0x904 -+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0) -+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0) -+ -+#define PCIE20_PLR_IATU_CTRL2 0x908 -+#define PCIE20_PLR_IATU_ENABLE BIT(31) -+ -+#define PCIE20_PLR_IATU_LBAR 0x90C -+#define PCIE20_PLR_IATU_UBAR 0x910 -+#define PCIE20_PLR_IATU_LAR 0x914 -+#define PCIE20_PLR_IATU_LTAR 0x918 -+#define PCIE20_PLR_IATU_UTAR 0x91c -+ -+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000 -+ - #define PCIE20_PARF_Q2A_FLUSH 0x1AC - - #define PCIE20_MISC_CONTROL_1_REG 0x8BC -@@ -251,6 +275,57 @@ static void qcom_pcie_2_1_0_ltssm_enable - writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL); - } - -+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev) -+{ -+ struct pcie_port *pp = &pcie->pci->pp; -+ -+ /* -+ * program and enable address translation region 0 (device config -+ * address space); region type config; -+ * axi config address range to device config address range -+ */ -+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | -+ PCIE20_PLR_IATU_REGION_INDEX(0), -+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT); -+ -+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1); -+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2); -+ writel(pp->cfg0_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR); -+ writel((pp->cfg0_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR); -+ writel((pp->cfg0_base + pp->cfg0_size - 1), -+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR); -+ writel(busdev, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR); -+ writel(0, pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR); -+} -+ -+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie) -+{ -+ struct pcie_port *pp = &pcie->pci->pp; -+ -+ /* -+ * program and enable address translation region 2 (device resource -+ * address space); region type memory; -+ * axi device bar address range to device bar address range -+ */ -+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | -+ PCIE20_PLR_IATU_REGION_INDEX(2), -+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT); -+ -+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1); -+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2); -+ writel(pp->mem_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR); -+ writel((pp->mem_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR); -+ writel(pp->mem_base + pp->mem_size - 1, -+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR); -+ writel(pp->mem_bus_addr, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR); -+ writel(upper_32_bits(pp->mem_bus_addr), -+ pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR); -+ -+ /* 256B PCIE buffer setting */ -+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0); -+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); -+} -+ - static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie) - { - struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; -@@ -465,6 +540,9 @@ static int qcom_pcie_init_2_1_0(struct q - writel(CFG_BRIDGE_SB_INIT, - pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); - -+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR); -+ qcom_pcie_prog_viewport_mem2_outbound(pcie); -+ - return 0; - - err_deassert_ahb: diff --git a/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch b/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch deleted file mode 100644 index 5dea084bfa..0000000000 --- a/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001 -From: Sham Muthayyan -Date: Wed, 7 Sep 2016 16:44:28 +0530 -Subject: PCI: qcom: Force GEN1 support - -Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0 -Signed-off-by: Sham Muthayyan ---- - drivers/pci/host/pcie-qcom.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/drivers/pci/dwc/pcie-qcom.c -+++ b/drivers/pci/dwc/pcie-qcom.c -@@ -129,6 +129,8 @@ - #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 - #define SLV_ADDR_SPACE_SZ 0x10000000 - -+#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0 -+ - struct qcom_pcie_resources_2_1_0 { - struct clk *iface_clk; - struct clk *core_clk; -@@ -218,6 +220,7 @@ struct qcom_pcie { - struct phy *phy; - struct gpio_desc *reset; - struct qcom_pcie_ops *ops; -+ uint32_t force_gen1; - }; - - #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) -@@ -532,6 +535,11 @@ static int qcom_pcie_init_2_1_0(struct q - - /* wait for clock acquisition */ - usleep_range(1000, 1500); -+ if (pcie->force_gen1) { -+ writel_relaxed((readl_relaxed( -+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1), -+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2); -+ } - - - /* Set the Max TLP size to 2K, instead of using default of 4K */ -@@ -1382,6 +1390,8 @@ static int qcom_pcie_probe(struct platfo - struct dw_pcie *pci; - struct qcom_pcie *pcie; - int ret; -+ uint32_t force_gen1 = 0; -+ struct device_node *np = pdev->dev.of_node; - - pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); - if (!pcie) -@@ -1403,6 +1413,9 @@ static int qcom_pcie_probe(struct platfo - if (IS_ERR(pcie->reset)) - return PTR_ERR(pcie->reset); - -+ of_property_read_u32(np, "force_gen1", &force_gen1); -+ pcie->force_gen1 = force_gen1; -+ - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); - pcie->parf = devm_ioremap_resource(dev, res); - if (IS_ERR(pcie->parf)) diff --git a/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch b/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch deleted file mode 100644 index c7dfd53cb1..0000000000 --- a/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch +++ /dev/null @@ -1,69 +0,0 @@ -From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001 -From: Gokul Sriram Palanisamy -Date: Thu, 15 Dec 2016 17:38:18 +0530 -Subject: pcie: Set PCIE MRRS and MPS to 256B - -Set Max Read Request Size and Max Payload Size to 256 bytes, -per chip team recommendation. - -Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8 -Signed-off-by: Gokul Sriram Palanisamy ---- - drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 37 insertions(+) - -(limited to 'drivers/pci/host/pcie-qcom.c') - ---- a/drivers/pci/dwc/pcie-qcom.c -+++ b/drivers/pci/dwc/pcie-qcom.c -@@ -131,6 +131,14 @@ - - #define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0 - -+#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) -+#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1)) -+#define PCIE20_DEV_CAS 0x78 -+#define PCIE20_MRRS_MASK __mask(14, 12) -+#define PCIE20_MRRS(x) __set(x, 14, 12) -+#define PCIE20_MPS_MASK __mask(7, 5) -+#define PCIE20_MPS(x) __set(x, 7, 5) -+ - struct qcom_pcie_resources_2_1_0 { - struct clk *iface_clk; - struct clk *core_clk; -@@ -1472,6 +1480,35 @@ static int qcom_pcie_probe(struct platfo - return 0; - } - -+static void qcom_pcie_fixup_final(struct pci_dev *dev) -+{ -+ int cap, err; -+ u16 ctl, reg_val; -+ -+ cap = pci_pcie_cap(dev); -+ if (!cap) -+ return; -+ -+ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl); -+ -+ if (err) -+ return; -+ -+ reg_val = ctl; -+ -+ if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1) -+ reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1); -+ -+ if (((ctl & PCIE20_MPS_MASK) >> 5) > 1) -+ reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1); -+ -+ err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val); -+ -+ if (err) -+ pr_err("pcie config write failed %d\n", err); -+} -+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final); -+ - static const struct of_device_id qcom_pcie_match[] = { - { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, - { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, diff --git a/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch b/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch deleted file mode 100644 index 88bd7730c1..0000000000 --- a/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch +++ /dev/null @@ -1,91 +0,0 @@ -From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Thu, 22 Dec 2016 11:18:45 +0530 -Subject: pcie: qcom: Fixed pcie_phy_clk branch issue - -Following backtraces are observed in PCIe deinit operation. - - Hardware name: Qualcomm (Flattened Device Tree) - (unwind_backtrace) from [] (show_stack+0x10/0x14) - (show_stack) from [] (dump_stack+0x84/0x98) - (dump_stack) from [] (warn_slowpath_common+0x9c/0xb8) - (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) - (warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120) - (clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4) - (clk_core_disable) from [] (clk_disable+0x24/0x30) - (clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8) - (qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8) - (qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538) - (dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4) - -pcie_phy_clk is generated for PCIe controller itself and the -GCC controls its branch operation. This error is coming since -the assert operations turn off the parent clock before branch -clock. Now this patch moves clk_disable_unprepare before assert -operations. - -Similarly, during probe function, the clock branch operation -should be done after dessert operation. Currently, it does not -generate any error since bootloader enables the pcie_phy_clk -but the same error is coming during probe, if bootloader -disables pcie_phy_clk. - -Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d -Signed-off-by: Abhishek Sahu ---- - drivers/pci/host/pcie-qcom.c | 16 +++++++--------- - 1 file changed, 7 insertions(+), 9 deletions(-) - ---- a/drivers/pci/dwc/pcie-qcom.c -+++ b/drivers/pci/dwc/pcie-qcom.c -@@ -407,6 +407,7 @@ static void qcom_pcie_deinit_2_1_0(struc - { - struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; - -+ clk_disable_unprepare(res->phy_clk); - reset_control_assert(res->pci_reset); - reset_control_assert(res->axi_reset); - reset_control_assert(res->ahb_reset); -@@ -415,7 +416,6 @@ static void qcom_pcie_deinit_2_1_0(struc - reset_control_assert(res->ext_reset); - clk_disable_unprepare(res->iface_clk); - clk_disable_unprepare(res->core_clk); -- clk_disable_unprepare(res->phy_clk); - clk_disable_unprepare(res->aux_clk); - clk_disable_unprepare(res->ref_clk); - regulator_disable(res->vdda); -@@ -472,12 +472,6 @@ static int qcom_pcie_init_2_1_0(struct q - goto err_clk_core; - } - -- ret = clk_prepare_enable(res->phy_clk); -- if (ret) { -- dev_err(dev, "cannot prepare/enable phy clock\n"); -- goto err_clk_phy; -- } -- - ret = clk_prepare_enable(res->aux_clk); - if (ret) { - dev_err(dev, "cannot prepare/enable aux clock\n"); -@@ -541,6 +535,12 @@ static int qcom_pcie_init_2_1_0(struct q - return ret; - } - -+ ret = clk_prepare_enable(res->phy_clk); -+ if (ret) { -+ dev_err(dev, "cannot prepare/enable phy clock\n"); -+ goto err_deassert_ahb; -+ } -+ - /* wait for clock acquisition */ - usleep_range(1000, 1500); - if (pcie->force_gen1) { -@@ -566,8 +566,6 @@ err_deassert_ahb: - err_clk_ref: - clk_disable_unprepare(res->aux_clk); - err_clk_aux: -- clk_disable_unprepare(res->phy_clk); --err_clk_phy: - clk_disable_unprepare(res->core_clk); - err_clk_core: - clk_disable_unprepare(res->iface_clk); diff --git a/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch deleted file mode 100644 index 227a1b4e7a..0000000000 --- a/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Thu, 22 Dec 2016 11:50:49 +0530 -Subject: pcie: qcom: change duplicate pci reset to phy reset - -The deinit issues reset_control_assert for pci twice and -does not contain phy reset. - -Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99 -Signed-off-by: Abhishek Sahu ---- - drivers/pci/host/pcie-qcom.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/pci/dwc/pcie-qcom.c -+++ b/drivers/pci/dwc/pcie-qcom.c -@@ -408,7 +408,7 @@ static void qcom_pcie_deinit_2_1_0(struc - struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; - - clk_disable_unprepare(res->phy_clk); -- reset_control_assert(res->pci_reset); -+ reset_control_assert(res->phy_reset); - reset_control_assert(res->axi_reset); - reset_control_assert(res->ahb_reset); - reset_control_assert(res->por_reset); diff --git a/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch b/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch deleted file mode 100644 index 035281f66a..0000000000 --- a/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -422,6 +422,9 @@ static const struct of_device_id qcom_sc - { .compatible = "qcom,scm-msm8996", - .data = NULL, /* no clocks */ - }, -+ { .compatible = "qcom,scm-ipq806x", -+ .data = NULL, /* no clocks */ -+ }, - { .compatible = "qcom,scm", - .data = (void *)(SCM_HAS_CORE_CLK - | SCM_HAS_IFACE_CLK diff --git a/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch deleted file mode 100644 index f57773ef48..0000000000 --- a/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch +++ /dev/null @@ -1,183 +0,0 @@ -From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001 -From: Ajay Kishore -Date: Tue, 24 Jan 2017 14:14:16 +0530 -Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps - -For IPQ806x targets, TZ protects the registers that are used to -configure the routing of interrupts to a target processor. -To resolve this, this patch uses scm call to route GPIO interrupts -to application processor. Also the scm call interface is changed. - -Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce -Signed-off-by: Ajay Kishore ---- - drivers/firmware/qcom_scm-32.c | 17 +++++++++++++++++ - drivers/firmware/qcom_scm-64.c | 9 +++++++++ - drivers/firmware/qcom_scm.c | 13 +++++++++++++ - drivers/firmware/qcom_scm.h | 8 ++++++++ - drivers/pinctrl/qcom/pinctrl-msm.c | 34 ++++++++++++++++++++++++++++------ - include/linux/qcom_scm.h | 3 ++- - 6 files changed, 77 insertions(+), 7 deletions(-) - ---- a/drivers/firmware/qcom_scm-32.c -+++ b/drivers/firmware/qcom_scm-32.c -@@ -561,6 +561,24 @@ int __qcom_scm_pas_mss_reset(struct devi - return ret ? : le32_to_cpu(out); - } - -+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1) -+{ -+ s32 ret; -+ -+ ret = qcom_scm_call_atomic1(svc_id, cmd_id, arg1); -+ -+ return ret; -+} -+ -+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2) -+{ -+ s32 ret; -+ -+ ret = qcom_scm_call_atomic2(svc_id, cmd_id, arg1, arg2); -+ -+ return ret; -+} -+ - int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id) - { - struct { ---- a/drivers/firmware/qcom_scm-64.c -+++ b/drivers/firmware/qcom_scm-64.c -@@ -366,6 +366,16 @@ int __qcom_scm_pas_mss_reset(struct devi - return ret ? : res.a1; - } - -+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1) -+{ -+ return -ENOTSUPP; -+} -+ -+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2) -+{ -+ return -ENOTSUPP; -+} -+ - int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id) - { - struct qcom_scm_desc desc = {0}; ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -470,3 +470,16 @@ static int __init qcom_scm_init(void) - return platform_driver_register(&qcom_scm_driver); - } - subsys_initcall(qcom_scm_init); -+ -+int qcom_scm_pinmux_read(u32 arg1) -+{ -+ return __qcom_scm_pinmux_read(SCM_SVC_IO_ACCESS, SCM_IO_READ, arg1); -+} -+EXPORT_SYMBOL(qcom_scm_pinmux_read); -+ -+int qcom_scm_pinmux_write(u32 arg1, u32 arg2) -+{ -+ return __qcom_scm_pinmux_write(SCM_SVC_IO_ACCESS, SCM_IO_WRITE, -+ arg1, arg2); -+} -+EXPORT_SYMBOL(qcom_scm_pinmux_write); ---- a/drivers/firmware/qcom_scm.h -+++ b/drivers/firmware/qcom_scm.h -@@ -58,6 +58,13 @@ extern int __qcom_scm_pas_auth_and_rese - extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral); - extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset); - -+#define SCM_IO_READ 1 -+#define SCM_IO_WRITE 2 -+#define SCM_SVC_IO_ACCESS 0x5 -+ -+s32 __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1); -+s32 __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2); -+ - /* common error codes */ - #define QCOM_SCM_V2_EBUSY -12 - #define QCOM_SCM_ENOMEM -5 ---- a/drivers/pinctrl/qcom/pinctrl-msm.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm.c -@@ -30,7 +30,8 @@ - #include - #include - #include -- -+#include -+#include - #include "../core.h" - #include "../pinconf.h" - #include "pinctrl-msm.h" -@@ -646,6 +647,9 @@ static void msm_gpio_irq_ack(struct irq_ - const struct msm_pingroup *g; - unsigned long flags; - u32 val; -+ u32 addr; -+ int ret; -+ const __be32 *reg; - - g = &pctrl->soc->groups[d->hwirq]; - -@@ -684,11 +688,30 @@ static int msm_gpio_irq_set_type(struct - else - clear_bit(d->hwirq, pctrl->dual_edge_irqs); - -+ int ret = of_device_is_compatible(pctrl->dev->of_node, -+ "qcom,ipq8064-pinctrl"); - /* Route interrupts to application cpu */ -- val = readl(pctrl->regs + g->intr_target_reg); -- val &= ~(7 << g->intr_target_bit); -- val |= g->intr_target_kpss_val << g->intr_target_bit; -- writel(val, pctrl->regs + g->intr_target_reg); -+ if (!ret) { -+ val = readl(pctrl->regs + g->intr_target_reg); -+ val &= ~(7 << g->intr_target_bit); -+ val |= g->intr_target_kpss_val << g->intr_target_bit; -+ writel(val, pctrl->regs + g->intr_target_reg); -+ } else { -+ const __be32 *reg = of_get_property(pctrl->dev->of_node, "reg", NULL); -+ if (reg) { -+ u32 addr = be32_to_cpup(reg) + g->intr_target_reg; -+ val = qcom_scm_pinmux_read(addr); -+ __iormb(); -+ -+ val &= ~(7 << g->intr_target_bit); -+ val |= g->intr_target_kpss_val << g->intr_target_bit; -+ -+ __iowmb(); -+ ret = qcom_scm_pinmux_write(addr, val); -+ if (ret) -+ pr_err("\n Routing interrupts to Apps proc failed"); -+ } -+ } - - /* Update configuration for gpio. - * RAW_STATUS_EN is left on for all gpio irqs. Due to the -@@ -975,4 +998,3 @@ int msm_pinctrl_remove(struct platform_d - return 0; - } - EXPORT_SYMBOL(msm_pinctrl_remove); -- ---- a/include/linux/qcom_scm.h -+++ b/include/linux/qcom_scm.h -@@ -43,6 +43,8 @@ extern int qcom_scm_set_remote_state(u32 - extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare); - extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size); - extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare); -+extern s32 qcom_scm_pinmux_read(u32 arg1); -+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2); - #else - - #include -@@ -76,5 +78,7 @@ qcom_scm_set_remote_state(u32 state,u32 - static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; } - static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; } - static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; } -+extern s32 qcom_scm_pinmux_read(u32 arg1) { return -ENODEV; } -+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2) { return -ENODEV; } - #endif - #endif diff --git a/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch b/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch deleted file mode 100644 index ee410ca6fa..0000000000 --- a/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch +++ /dev/null @@ -1,71 +0,0 @@ -From a86bda9f8a7965f0cedd347a9c04800eb9f41ea3 Mon Sep 17 00:00:00 2001 -From: Vasudevan Murugesan -Date: Tue, 21 Jul 2015 10:22:38 +0530 -Subject: ipq806x: usb: Control USB master reset - -During removal of the glue layer(dwc3-of-simple), -USB master reset is set to active and during insertion -it is de-activated. - -Change-Id: I537dc810f6cb2a46664ee674840145066432b957 -Signed-off-by: Vasudevan Murugesan -(cherry picked from commit 4611e13580a216812f85f0801b95442d02eeb836) ---- - drivers/usb/dwc3/dwc3-of-simple.c | 22 ++++++++++++++++++++++ - 1 file changed, 12 insertions(+) - -(limited to 'drivers/usb/dwc3/dwc3-of-simple.c') - ---- a/drivers/usb/dwc3/dwc3-of-simple.c -+++ b/drivers/usb/dwc3/dwc3-of-simple.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -33,6 +34,8 @@ struct dwc3_of_simple { - struct device *dev; - struct clk **clks; - int num_clocks; -+ struct reset_control *mstr_rst_30_0; -+ struct reset_control *mstr_rst_30_1; - }; - - static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count) -@@ -102,6 +105,20 @@ static int dwc3_of_simple_probe(struct p - if (ret) - return ret; - -+ simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst"); -+ -+ if (!IS_ERR(simple->mstr_rst_30_0)) -+ reset_control_deassert(simple->mstr_rst_30_0); -+ else -+ dev_dbg(simple->dev, "cannot get handle for USB PHY 0 master reset control\n"); -+ -+ simple->mstr_rst_30_1 = devm_reset_control_get(dev, "usb30_1_mstr_rst"); -+ -+ if (!IS_ERR(simple->mstr_rst_30_1)) -+ reset_control_deassert(simple->mstr_rst_30_1); -+ else -+ dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n"); -+ - ret = of_platform_populate(np, NULL, NULL, dev); - if (ret) { - for (i = 0; i < simple->num_clocks; i++) { -@@ -130,6 +147,12 @@ static int dwc3_of_simple_remove(struct - clk_put(simple->clks[i]); - } - -+ if (!IS_ERR(simple->mstr_rst_30_0)) -+ reset_control_assert(simple->mstr_rst_30_0); -+ -+ if (!IS_ERR(simple->mstr_rst_30_1)) -+ reset_control_assert(simple->mstr_rst_30_1); -+ - of_platform_depopulate(dev); - - pm_runtime_disable(dev); diff --git a/target/linux/ipq806x/patches-4.14/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch b/target/linux/ipq806x/patches-4.14/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch deleted file mode 100644 index 2867239d1c..0000000000 --- a/target/linux/ipq806x/patches-4.14/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch +++ /dev/null @@ -1,50 +0,0 @@ -From a3488aa9bed37c56e405967d44e821c484b5d6b9 Mon Sep 17 00:00:00 2001 -From: Ram Chandra Jangir -Date: Fri, 28 Sep 2018 15:19:50 +0530 -Subject: [PATCH] ipq8064: pinctrl: Fixed missing RGMII pincontrol definitions - -Signed-off-by: Ram Chandra Jangir ---- - drivers/pinctrl/qcom/pinctrl-ipq8064.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c -+++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c -@@ -308,7 +308,7 @@ static const char * const gpio_groups[] - }; - - static const char * const mdio_groups[] = { -- "gpio0", "gpio1", "gpio10", "gpio11", -+ "gpio0", "gpio1", "gpio2", "gpio10", "gpio11", "gpio66", - }; - - static const char * const mi2s_groups[] = { -@@ -412,8 +412,8 @@ static const char * const usb2_hsic_grou - }; - - static const char * const rgmii2_groups[] = { -- "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", -+ "gpio2", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", "gpio66", - }; - - static const char * const sata_groups[] = { -@@ -548,7 +548,7 @@ static const struct msm_function ipq8064 - static const struct msm_pingroup ipq8064_groups[] = { - PINGROUP(0, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(1, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(2, gsbi5_spi_cs3, NA, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(2, gsbi5_spi_cs3, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(3, pcie1_rst, pcie1_prsnt, pdm, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(4, pcie1_pwren_n, pcie1_pwren, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(5, pcie1_clk_req, pcie1_pwrflt, NA, NA, NA, NA, NA, NA, NA, NA), -@@ -612,7 +612,7 @@ static const struct msm_pingroup ipq8064 - PINGROUP(63, pcie3_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(65, pcie3_clk_req, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(66, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(67, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(68, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA), - SDC_PINGROUP(sdc3_clk, 0x204a, 14, 6), diff --git a/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch b/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch deleted file mode 100644 index 2bd18ffa19..0000000000 --- a/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch +++ /dev/null @@ -1,22 +0,0 @@ -Subject: mtd: spi-nor: add mx25l25635f with SECT_4K - -This patch fixes an issue with the creation of the -ubi volume on the AVM FRITZ!Box 4040. The mx25l25635f -and mx25l25635e support SECT_4K which will set the -erase size to 4K. This is used by ubi to calculate -VID header offsets. Without this, uboot and linux -disagrees about the layout and refuse to attach -the ubi volume created by the other. - ---- ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1036,7 +1036,7 @@ static const struct flash_info spi_nor_i - { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, -- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, -+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) }, - { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, - { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, diff --git a/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch b/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch deleted file mode 100644 index cd9fd895c5..0000000000 --- a/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch +++ /dev/null @@ -1,11026 +0,0 @@ -From: Christian Lamparter -Subject: BUS: add MSM_BUS ---- a/drivers/bus/Makefile -+++ b/drivers/bus/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmst - obj-$(CONFIG_IMX_WEIM) += imx-weim.o - obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o - obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o -+obj-$(CONFIG_BUS_TOPOLOGY_ADHOC)+= msm_bus/ - - # Interconnect bus driver for OMAP SoCs. - obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o ---- a/drivers/bus/Kconfig -+++ b/drivers/bus/Kconfig -@@ -93,6 +93,8 @@ config MVEBU_MBUS - Driver needed for the MBus configuration on Marvell EBU SoCs - (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP). - -+source "drivers/bus/msm_bus/Kconfig" -+ - config OMAP_INTERCONNECT - tristate "OMAP INTERCONNECT DRIVER" - depends on ARCH_OMAP2PLUS ---- /dev/null -+++ b/include/dt-bindings/msm/msm-bus-ids.h -@@ -0,0 +1,869 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef __MSM_BUS_IDS_H -+#define __MSM_BUS_IDS_H -+ -+/* Topology related enums */ -+#define MSM_BUS_FAB_DEFAULT 0 -+#define MSM_BUS_FAB_APPSS 0 -+#define MSM_BUS_FAB_SYSTEM 1024 -+#define MSM_BUS_FAB_MMSS 2048 -+#define MSM_BUS_FAB_SYSTEM_FPB 3072 -+#define MSM_BUS_FAB_CPSS_FPB 4096 -+ -+#define MSM_BUS_FAB_BIMC 0 -+#define MSM_BUS_FAB_SYS_NOC 1024 -+#define MSM_BUS_FAB_MMSS_NOC 2048 -+#define MSM_BUS_FAB_OCMEM_NOC 3072 -+#define MSM_BUS_FAB_PERIPH_NOC 4096 -+#define MSM_BUS_FAB_CONFIG_NOC 5120 -+#define MSM_BUS_FAB_OCMEM_VNOC 6144 -+#define MSM_BUS_FAB_MMSS_AHB 2049 -+#define MSM_BUS_FAB_A0_NOC 6145 -+#define MSM_BUS_FAB_A1_NOC 6146 -+#define MSM_BUS_FAB_A2_NOC 6147 -+ -+#define MSM_BUS_MASTER_FIRST 1 -+#define MSM_BUS_MASTER_AMPSS_M0 1 -+#define MSM_BUS_MASTER_AMPSS_M1 2 -+#define MSM_BUS_APPSS_MASTER_FAB_MMSS 3 -+#define MSM_BUS_APPSS_MASTER_FAB_SYSTEM 4 -+#define MSM_BUS_SYSTEM_MASTER_FAB_APPSS 5 -+#define MSM_BUS_MASTER_SPS 6 -+#define MSM_BUS_MASTER_ADM_PORT0 7 -+#define MSM_BUS_MASTER_ADM_PORT1 8 -+#define MSM_BUS_SYSTEM_MASTER_ADM1_PORT0 9 -+#define MSM_BUS_MASTER_ADM1_PORT1 10 -+#define MSM_BUS_MASTER_LPASS_PROC 11 -+#define MSM_BUS_MASTER_MSS_PROCI 12 -+#define MSM_BUS_MASTER_MSS_PROCD 13 -+#define MSM_BUS_MASTER_MSS_MDM_PORT0 14 -+#define MSM_BUS_MASTER_LPASS 15 -+#define MSM_BUS_SYSTEM_MASTER_CPSS_FPB 16 -+#define MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB 17 -+#define MSM_BUS_SYSTEM_MASTER_MMSS_FPB 18 -+#define MSM_BUS_MASTER_ADM1_CI 19 -+#define MSM_BUS_MASTER_ADM0_CI 20 -+#define MSM_BUS_MASTER_MSS_MDM_PORT1 21 -+#define MSM_BUS_MASTER_MDP_PORT0 22 -+#define MSM_BUS_MASTER_MDP_PORT1 23 -+#define MSM_BUS_MMSS_MASTER_ADM1_PORT0 24 -+#define MSM_BUS_MASTER_ROTATOR 25 -+#define MSM_BUS_MASTER_GRAPHICS_3D 26 -+#define MSM_BUS_MASTER_JPEG_DEC 27 -+#define MSM_BUS_MASTER_GRAPHICS_2D_CORE0 28 -+#define MSM_BUS_MASTER_VFE 29 -+#define MSM_BUS_MASTER_VPE 30 -+#define MSM_BUS_MASTER_JPEG_ENC 31 -+#define MSM_BUS_MASTER_GRAPHICS_2D_CORE1 32 -+#define MSM_BUS_MMSS_MASTER_APPS_FAB 33 -+#define MSM_BUS_MASTER_HD_CODEC_PORT0 34 -+#define MSM_BUS_MASTER_HD_CODEC_PORT1 35 -+#define MSM_BUS_MASTER_SPDM 36 -+#define MSM_BUS_MASTER_RPM 37 -+#define MSM_BUS_MASTER_MSS 38 -+#define MSM_BUS_MASTER_RIVA 39 -+#define MSM_BUS_MASTER_SNOC_VMEM 40 -+#define MSM_BUS_MASTER_MSS_SW_PROC 41 -+#define MSM_BUS_MASTER_MSS_FW_PROC 42 -+#define MSM_BUS_MASTER_HMSS 43 -+#define MSM_BUS_MASTER_GSS_NAV 44 -+#define MSM_BUS_MASTER_PCIE 45 -+#define MSM_BUS_MASTER_SATA 46 -+#define MSM_BUS_MASTER_CRYPTO 47 -+#define MSM_BUS_MASTER_VIDEO_CAP 48 -+#define MSM_BUS_MASTER_GRAPHICS_3D_PORT1 49 -+#define MSM_BUS_MASTER_VIDEO_ENC 50 -+#define MSM_BUS_MASTER_VIDEO_DEC 51 -+#define MSM_BUS_MASTER_LPASS_AHB 52 -+#define MSM_BUS_MASTER_QDSS_BAM 53 -+#define MSM_BUS_MASTER_SNOC_CFG 54 -+#define MSM_BUS_MASTER_CRYPTO_CORE0 55 -+#define MSM_BUS_MASTER_CRYPTO_CORE1 56 -+#define MSM_BUS_MASTER_MSS_NAV 57 -+#define MSM_BUS_MASTER_OCMEM_DMA 58 -+#define MSM_BUS_MASTER_WCSS 59 -+#define MSM_BUS_MASTER_QDSS_ETR 60 -+#define MSM_BUS_MASTER_USB3 61 -+#define MSM_BUS_MASTER_JPEG 62 -+#define MSM_BUS_MASTER_VIDEO_P0 63 -+#define MSM_BUS_MASTER_VIDEO_P1 64 -+#define MSM_BUS_MASTER_MSS_PROC 65 -+#define MSM_BUS_MASTER_JPEG_OCMEM 66 -+#define MSM_BUS_MASTER_MDP_OCMEM 67 -+#define MSM_BUS_MASTER_VIDEO_P0_OCMEM 68 -+#define MSM_BUS_MASTER_VIDEO_P1_OCMEM 69 -+#define MSM_BUS_MASTER_VFE_OCMEM 70 -+#define MSM_BUS_MASTER_CNOC_ONOC_CFG 71 -+#define MSM_BUS_MASTER_RPM_INST 72 -+#define MSM_BUS_MASTER_RPM_DATA 73 -+#define MSM_BUS_MASTER_RPM_SYS 74 -+#define MSM_BUS_MASTER_DEHR 75 -+#define MSM_BUS_MASTER_QDSS_DAP 76 -+#define MSM_BUS_MASTER_TIC 77 -+#define MSM_BUS_MASTER_SDCC_1 78 -+#define MSM_BUS_MASTER_SDCC_3 79 -+#define MSM_BUS_MASTER_SDCC_4 80 -+#define MSM_BUS_MASTER_SDCC_2 81 -+#define MSM_BUS_MASTER_TSIF 82 -+#define MSM_BUS_MASTER_BAM_DMA 83 -+#define MSM_BUS_MASTER_BLSP_2 84 -+#define MSM_BUS_MASTER_USB_HSIC 85 -+#define MSM_BUS_MASTER_BLSP_1 86 -+#define MSM_BUS_MASTER_USB_HS 87 -+#define MSM_BUS_MASTER_PNOC_CFG 88 -+#define MSM_BUS_MASTER_V_OCMEM_GFX3D 89 -+#define MSM_BUS_MASTER_IPA 90 -+#define MSM_BUS_MASTER_QPIC 91 -+#define MSM_BUS_MASTER_MDPE 92 -+#define MSM_BUS_MASTER_USB_HS2 93 -+#define MSM_BUS_MASTER_VPU 94 -+#define MSM_BUS_MASTER_UFS 95 -+#define MSM_BUS_MASTER_BCAST 96 -+#define MSM_BUS_MASTER_CRYPTO_CORE2 97 -+#define MSM_BUS_MASTER_EMAC 98 -+#define MSM_BUS_MASTER_VPU_1 99 -+#define MSM_BUS_MASTER_PCIE_1 100 -+#define MSM_BUS_MASTER_USB3_1 101 -+#define MSM_BUS_MASTER_CNOC_MNOC_MMSS_CFG 102 -+#define MSM_BUS_MASTER_CNOC_MNOC_CFG 103 -+#define MSM_BUS_MASTER_TCU_0 104 -+#define MSM_BUS_MASTER_TCU_1 105 -+#define MSM_BUS_MASTER_CPP 106 -+#define MSM_BUS_MASTER_AUDIO 107 -+#define MSM_BUS_MASTER_PCIE_2 108 -+#define MSM_BUS_MASTER_BLSP_BAM 109 -+#define MSM_BUS_MASTER_USB2_BAM 110 -+#define MSM_BUS_MASTER_ADDS_DMA0 111 -+#define MSM_BUS_MASTER_ADDS_DMA1 112 -+#define MSM_BUS_MASTER_ADDS_DMA2 113 -+#define MSM_BUS_MASTER_ADDS_DMA3 114 -+#define MSM_BUS_MASTER_QPIC_BAM 115 -+#define MSM_BUS_MASTER_SDCC_BAM 116 -+#define MSM_BUS_MASTER_DDRC_SNOC 117 -+#define MSM_BUS_MASTER_WSS_0 118 -+#define MSM_BUS_MASTER_WSS_1 119 -+#define MSM_BUS_MASTER_ESS 120 -+#define MSM_BUS_MASTER_QDSS_BAMNDP 121 -+#define MSM_BUS_MASTER_QDSS_SNOC_CFG 122 -+#define MSM_BUS_MASTER_LAST 130 -+ -+#define MSM_BUS_SYSTEM_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB -+#define MSM_BUS_CPSS_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_CPSS_FPB -+ -+#define MSM_BUS_SNOC_MM_INT_0 10000 -+#define MSM_BUS_SNOC_MM_INT_1 10001 -+#define MSM_BUS_SNOC_MM_INT_2 10002 -+#define MSM_BUS_SNOC_MM_INT_BIMC 10003 -+#define MSM_BUS_SNOC_INT_0 10004 -+#define MSM_BUS_SNOC_INT_1 10005 -+#define MSM_BUS_SNOC_INT_BIMC 10006 -+#define MSM_BUS_SNOC_BIMC_0_MAS 10007 -+#define MSM_BUS_SNOC_BIMC_1_MAS 10008 -+#define MSM_BUS_SNOC_QDSS_INT 10009 -+#define MSM_BUS_PNOC_SNOC_MAS 10010 -+#define MSM_BUS_PNOC_SNOC_SLV 10011 -+#define MSM_BUS_PNOC_INT_0 10012 -+#define MSM_BUS_PNOC_INT_1 10013 -+#define MSM_BUS_PNOC_M_0 10014 -+#define MSM_BUS_PNOC_M_1 10015 -+#define MSM_BUS_BIMC_SNOC_MAS 10016 -+#define MSM_BUS_BIMC_SNOC_SLV 10017 -+#define MSM_BUS_PNOC_SLV_0 10018 -+#define MSM_BUS_PNOC_SLV_1 10019 -+#define MSM_BUS_PNOC_SLV_2 10020 -+#define MSM_BUS_PNOC_SLV_3 10021 -+#define MSM_BUS_PNOC_SLV_4 10022 -+#define MSM_BUS_PNOC_SLV_8 10023 -+#define MSM_BUS_PNOC_SLV_9 10024 -+#define MSM_BUS_SNOC_BIMC_0_SLV 10025 -+#define MSM_BUS_SNOC_BIMC_1_SLV 10026 -+#define MSM_BUS_MNOC_BIMC_MAS 10027 -+#define MSM_BUS_MNOC_BIMC_SLV 10028 -+#define MSM_BUS_BIMC_MNOC_MAS 10029 -+#define MSM_BUS_BIMC_MNOC_SLV 10030 -+#define MSM_BUS_SNOC_BIMC_MAS 10031 -+#define MSM_BUS_SNOC_BIMC_SLV 10032 -+#define MSM_BUS_CNOC_SNOC_MAS 10033 -+#define MSM_BUS_CNOC_SNOC_SLV 10034 -+#define MSM_BUS_SNOC_CNOC_MAS 10035 -+#define MSM_BUS_SNOC_CNOC_SLV 10036 -+#define MSM_BUS_OVNOC_SNOC_MAS 10037 -+#define MSM_BUS_OVNOC_SNOC_SLV 10038 -+#define MSM_BUS_SNOC_OVNOC_MAS 10039 -+#define MSM_BUS_SNOC_OVNOC_SLV 10040 -+#define MSM_BUS_SNOC_PNOC_MAS 10041 -+#define MSM_BUS_SNOC_PNOC_SLV 10042 -+#define MSM_BUS_BIMC_INT_APPS_EBI 10043 -+#define MSM_BUS_BIMC_INT_APPS_SNOC 10044 -+#define MSM_BUS_SNOC_BIMC_2_MAS 10045 -+#define MSM_BUS_SNOC_BIMC_2_SLV 10046 -+#define MSM_BUS_PNOC_SLV_5 10047 -+#define MSM_BUS_PNOC_SLV_6 10048 -+#define MSM_BUS_PNOC_INT_2 10049 -+#define MSM_BUS_PNOC_INT_3 10050 -+#define MSM_BUS_PNOC_INT_4 10051 -+#define MSM_BUS_PNOC_INT_5 10052 -+#define MSM_BUS_PNOC_INT_6 10053 -+#define MSM_BUS_PNOC_INT_7 10054 -+#define MSM_BUS_BIMC_SNOC_1_MAS 10055 -+#define MSM_BUS_BIMC_SNOC_1_SLV 10056 -+#define MSM_BUS_PNOC_A1NOC_MAS 10057 -+#define MSM_BUS_PNOC_A1NOC_SLV 10058 -+#define MSM_BUS_CNOC_A1NOC_MAS 10059 -+#define MSM_BUS_A0NOC_SNOC_MAS 10060 -+#define MSM_BUS_A0NOC_SNOC_SLV 10061 -+#define MSM_BUS_A1NOC_SNOC_SLV 10062 -+#define MSM_BUS_A1NOC_SNOC_MAS 10063 -+#define MSM_BUS_A2NOC_SNOC_MAS 10064 -+#define MSM_BUS_A2NOC_SNOC_SLV 10065 -+#define MSM_BUS_PNOC_SLV_7 10066 -+#define MSM_BUS_INT_LAST 10067 -+ -+#define MSM_BUS_SLAVE_FIRST 512 -+#define MSM_BUS_SLAVE_EBI_CH0 512 -+#define MSM_BUS_SLAVE_EBI_CH1 513 -+#define MSM_BUS_SLAVE_AMPSS_L2 514 -+#define MSM_BUS_APPSS_SLAVE_FAB_MMSS 515 -+#define MSM_BUS_APPSS_SLAVE_FAB_SYSTEM 516 -+#define MSM_BUS_SYSTEM_SLAVE_FAB_APPS 517 -+#define MSM_BUS_SLAVE_SPS 518 -+#define MSM_BUS_SLAVE_SYSTEM_IMEM 519 -+#define MSM_BUS_SLAVE_AMPSS 520 -+#define MSM_BUS_SLAVE_MSS 521 -+#define MSM_BUS_SLAVE_LPASS 522 -+#define MSM_BUS_SYSTEM_SLAVE_CPSS_FPB 523 -+#define MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB 524 -+#define MSM_BUS_SYSTEM_SLAVE_MMSS_FPB 525 -+#define MSM_BUS_SLAVE_CORESIGHT 526 -+#define MSM_BUS_SLAVE_RIVA 527 -+#define MSM_BUS_SLAVE_SMI 528 -+#define MSM_BUS_MMSS_SLAVE_FAB_APPS 529 -+#define MSM_BUS_MMSS_SLAVE_FAB_APPS_1 530 -+#define MSM_BUS_SLAVE_MM_IMEM 531 -+#define MSM_BUS_SLAVE_CRYPTO 532 -+#define MSM_BUS_SLAVE_SPDM 533 -+#define MSM_BUS_SLAVE_RPM 534 -+#define MSM_BUS_SLAVE_RPM_MSG_RAM 535 -+#define MSM_BUS_SLAVE_MPM 536 -+#define MSM_BUS_SLAVE_PMIC1_SSBI1_A 537 -+#define MSM_BUS_SLAVE_PMIC1_SSBI1_B 538 -+#define MSM_BUS_SLAVE_PMIC1_SSBI1_C 539 -+#define MSM_BUS_SLAVE_PMIC2_SSBI2_A 540 -+#define MSM_BUS_SLAVE_PMIC2_SSBI2_B 541 -+#define MSM_BUS_SLAVE_GSBI1_UART 542 -+#define MSM_BUS_SLAVE_GSBI2_UART 543 -+#define MSM_BUS_SLAVE_GSBI3_UART 544 -+#define MSM_BUS_SLAVE_GSBI4_UART 545 -+#define MSM_BUS_SLAVE_GSBI5_UART 546 -+#define MSM_BUS_SLAVE_GSBI6_UART 547 -+#define MSM_BUS_SLAVE_GSBI7_UART 548 -+#define MSM_BUS_SLAVE_GSBI8_UART 549 -+#define MSM_BUS_SLAVE_GSBI9_UART 550 -+#define MSM_BUS_SLAVE_GSBI10_UART 551 -+#define MSM_BUS_SLAVE_GSBI11_UART 552 -+#define MSM_BUS_SLAVE_GSBI12_UART 553 -+#define MSM_BUS_SLAVE_GSBI1_QUP 554 -+#define MSM_BUS_SLAVE_GSBI2_QUP 555 -+#define MSM_BUS_SLAVE_GSBI3_QUP 556 -+#define MSM_BUS_SLAVE_GSBI4_QUP 557 -+#define MSM_BUS_SLAVE_GSBI5_QUP 558 -+#define MSM_BUS_SLAVE_GSBI6_QUP 559 -+#define MSM_BUS_SLAVE_GSBI7_QUP 560 -+#define MSM_BUS_SLAVE_GSBI8_QUP 561 -+#define MSM_BUS_SLAVE_GSBI9_QUP 562 -+#define MSM_BUS_SLAVE_GSBI10_QUP 563 -+#define MSM_BUS_SLAVE_GSBI11_QUP 564 -+#define MSM_BUS_SLAVE_GSBI12_QUP 565 -+#define MSM_BUS_SLAVE_EBI2_NAND 566 -+#define MSM_BUS_SLAVE_EBI2_CS0 567 -+#define MSM_BUS_SLAVE_EBI2_CS1 568 -+#define MSM_BUS_SLAVE_EBI2_CS2 569 -+#define MSM_BUS_SLAVE_EBI2_CS3 570 -+#define MSM_BUS_SLAVE_EBI2_CS4 571 -+#define MSM_BUS_SLAVE_EBI2_CS5 572 -+#define MSM_BUS_SLAVE_USB_FS1 573 -+#define MSM_BUS_SLAVE_USB_FS2 574 -+#define MSM_BUS_SLAVE_TSIF 575 -+#define MSM_BUS_SLAVE_MSM_TSSC 576 -+#define MSM_BUS_SLAVE_MSM_PDM 577 -+#define MSM_BUS_SLAVE_MSM_DIMEM 578 -+#define MSM_BUS_SLAVE_MSM_TCSR 579 -+#define MSM_BUS_SLAVE_MSM_PRNG 580 -+#define MSM_BUS_SLAVE_GSS 581 -+#define MSM_BUS_SLAVE_SATA 582 -+#define MSM_BUS_SLAVE_USB3 583 -+#define MSM_BUS_SLAVE_WCSS 584 -+#define MSM_BUS_SLAVE_OCIMEM 585 -+#define MSM_BUS_SLAVE_SNOC_OCMEM 586 -+#define MSM_BUS_SLAVE_SERVICE_SNOC 587 -+#define MSM_BUS_SLAVE_QDSS_STM 588 -+#define MSM_BUS_SLAVE_CAMERA_CFG 589 -+#define MSM_BUS_SLAVE_DISPLAY_CFG 590 -+#define MSM_BUS_SLAVE_OCMEM_CFG 591 -+#define MSM_BUS_SLAVE_CPR_CFG 592 -+#define MSM_BUS_SLAVE_CPR_XPU_CFG 593 -+#define MSM_BUS_SLAVE_MISC_CFG 594 -+#define MSM_BUS_SLAVE_MISC_XPU_CFG 595 -+#define MSM_BUS_SLAVE_VENUS_CFG 596 -+#define MSM_BUS_SLAVE_MISC_VENUS_CFG 597 -+#define MSM_BUS_SLAVE_GRAPHICS_3D_CFG 598 -+#define MSM_BUS_SLAVE_MMSS_CLK_CFG 599 -+#define MSM_BUS_SLAVE_MMSS_CLK_XPU_CFG 600 -+#define MSM_BUS_SLAVE_MNOC_MPU_CFG 601 -+#define MSM_BUS_SLAVE_ONOC_MPU_CFG 602 -+#define MSM_BUS_SLAVE_SERVICE_MNOC 603 -+#define MSM_BUS_SLAVE_OCMEM 604 -+#define MSM_BUS_SLAVE_SERVICE_ONOC 605 -+#define MSM_BUS_SLAVE_SDCC_1 606 -+#define MSM_BUS_SLAVE_SDCC_3 607 -+#define MSM_BUS_SLAVE_SDCC_2 608 -+#define MSM_BUS_SLAVE_SDCC_4 609 -+#define MSM_BUS_SLAVE_BAM_DMA 610 -+#define MSM_BUS_SLAVE_BLSP_2 611 -+#define MSM_BUS_SLAVE_USB_HSIC 612 -+#define MSM_BUS_SLAVE_BLSP_1 613 -+#define MSM_BUS_SLAVE_USB_HS 614 -+#define MSM_BUS_SLAVE_PDM 615 -+#define MSM_BUS_SLAVE_PERIPH_APU_CFG 616 -+#define MSM_BUS_SLAVE_PNOC_MPU_CFG 617 -+#define MSM_BUS_SLAVE_PRNG 618 -+#define MSM_BUS_SLAVE_SERVICE_PNOC 619 -+#define MSM_BUS_SLAVE_CLK_CTL 620 -+#define MSM_BUS_SLAVE_CNOC_MSS 621 -+#define MSM_BUS_SLAVE_SECURITY 622 -+#define MSM_BUS_SLAVE_TCSR 623 -+#define MSM_BUS_SLAVE_TLMM 624 -+#define MSM_BUS_SLAVE_CRYPTO_0_CFG 625 -+#define MSM_BUS_SLAVE_CRYPTO_1_CFG 626 -+#define MSM_BUS_SLAVE_IMEM_CFG 627 -+#define MSM_BUS_SLAVE_MESSAGE_RAM 628 -+#define MSM_BUS_SLAVE_BIMC_CFG 629 -+#define MSM_BUS_SLAVE_BOOT_ROM 630 -+#define MSM_BUS_SLAVE_CNOC_MNOC_MMSS_CFG 631 -+#define MSM_BUS_SLAVE_PMIC_ARB 632 -+#define MSM_BUS_SLAVE_SPDM_WRAPPER 633 -+#define MSM_BUS_SLAVE_DEHR_CFG 634 -+#define MSM_BUS_SLAVE_QDSS_CFG 635 -+#define MSM_BUS_SLAVE_RBCPR_CFG 636 -+#define MSM_BUS_SLAVE_RBCPR_QDSS_APU_CFG 637 -+#define MSM_BUS_SLAVE_SNOC_MPU_CFG 638 -+#define MSM_BUS_SLAVE_CNOC_ONOC_CFG 639 -+#define MSM_BUS_SLAVE_CNOC_MNOC_CFG 640 -+#define MSM_BUS_SLAVE_PNOC_CFG 641 -+#define MSM_BUS_SLAVE_SNOC_CFG 642 -+#define MSM_BUS_SLAVE_EBI1_DLL_CFG 643 -+#define MSM_BUS_SLAVE_PHY_APU_CFG 644 -+#define MSM_BUS_SLAVE_EBI1_PHY_CFG 645 -+#define MSM_BUS_SLAVE_SERVICE_CNOC 646 -+#define MSM_BUS_SLAVE_IPS_CFG 647 -+#define MSM_BUS_SLAVE_QPIC 648 -+#define MSM_BUS_SLAVE_DSI_CFG 649 -+#define MSM_BUS_SLAVE_UFS_CFG 650 -+#define MSM_BUS_SLAVE_RBCPR_CX_CFG 651 -+#define MSM_BUS_SLAVE_RBCPR_MX_CFG 652 -+#define MSM_BUS_SLAVE_PCIE_CFG 653 -+#define MSM_BUS_SLAVE_USB_PHYS_CFG 654 -+#define MSM_BUS_SLAVE_VIDEO_CAP_CFG 655 -+#define MSM_BUS_SLAVE_AVSYNC_CFG 656 -+#define MSM_BUS_SLAVE_CRYPTO_2_CFG 657 -+#define MSM_BUS_SLAVE_VPU_CFG 658 -+#define MSM_BUS_SLAVE_BCAST_CFG 659 -+#define MSM_BUS_SLAVE_KLM_CFG 660 -+#define MSM_BUS_SLAVE_GENI_IR_CFG 661 -+#define MSM_BUS_SLAVE_OCMEM_GFX 662 -+#define MSM_BUS_SLAVE_CATS_128 663 -+#define MSM_BUS_SLAVE_OCMEM_64 664 -+#define MSM_BUS_SLAVE_PCIE_0 665 -+#define MSM_BUS_SLAVE_PCIE_1 666 -+#define MSM_BUS_SLAVE_PCIE_0_CFG 667 -+#define MSM_BUS_SLAVE_PCIE_1_CFG 668 -+#define MSM_BUS_SLAVE_SRVC_MNOC 669 -+#define MSM_BUS_SLAVE_USB_HS2 670 -+#define MSM_BUS_SLAVE_AUDIO 671 -+#define MSM_BUS_SLAVE_TCU 672 -+#define MSM_BUS_SLAVE_APPSS 673 -+#define MSM_BUS_SLAVE_PCIE_PARF 674 -+#define MSM_BUS_SLAVE_USB3_PHY_CFG 675 -+#define MSM_BUS_SLAVE_IPA_CFG 676 -+#define MSM_BUS_SLAVE_A0NOC_SNOC 677 -+#define MSM_BUS_SLAVE_A1NOC_SNOC 678 -+#define MSM_BUS_SLAVE_A2NOC_SNOC 679 -+#define MSM_BUS_SLAVE_HMSS_L3 680 -+#define MSM_BUS_SLAVE_PIMEM_CFG 681 -+#define MSM_BUS_SLAVE_DCC_CFG 682 -+#define MSM_BUS_SLAVE_QDSS_RBCPR_APU_CFG 683 -+#define MSM_BUS_SLAVE_PCIE_2_CFG 684 -+#define MSM_BUS_SLAVE_PCIE20_AHB2PHY 685 -+#define MSM_BUS_SLAVE_A0NOC_CFG 686 -+#define MSM_BUS_SLAVE_A1NOC_CFG 687 -+#define MSM_BUS_SLAVE_A2NOC_CFG 688 -+#define MSM_BUS_SLAVE_A1NOC_MPU_CFG 689 -+#define MSM_BUS_SLAVE_A2NOC_MPU_CFG 690 -+#define MSM_BUS_SLAVE_A0NOC_SMMU_CFG 691 -+#define MSM_BUS_SLAVE_A1NOC_SMMU_CFG 692 -+#define MSM_BUS_SLAVE_A2NOC_SMMU_CFG 693 -+#define MSM_BUS_SLAVE_LPASS_SMMU_CFG 694 -+#define MSM_BUS_SLAVE_MMAGIC_CFG 695 -+#define MSM_BUS_SLAVE_VENUS_THROTTLE_CFG 696 -+#define MSM_BUS_SLAVE_SSC_CFG 697 -+#define MSM_BUS_SLAVE_DSA_CFG 698 -+#define MSM_BUS_SLAVE_DSA_MPU_CFG 699 -+#define MSM_BUS_SLAVE_DISPLAY_THROTTLE_CFG 700 -+#define MSM_BUS_SLAVE_SMMU_CPP_CFG 701 -+#define MSM_BUS_SLAVE_SMMU_JPEG_CFG 702 -+#define MSM_BUS_SLAVE_SMMU_MDP_CFG 703 -+#define MSM_BUS_SLAVE_SMMU_ROTATOR_CFG 704 -+#define MSM_BUS_SLAVE_SMMU_VENUS_CFG 705 -+#define MSM_BUS_SLAVE_SMMU_VFE_CFG 706 -+#define MSM_BUS_SLAVE_A0NOC_MPU_CFG 707 -+#define MSM_BUS_SLAVE_VMEM_CFG 708 -+#define MSM_BUS_SLAVE_CAMERA_THROTTLE_CFG 700 -+#define MSM_BUS_SLAVE_VMEM 709 -+#define MSM_BUS_SLAVE_AHB2PHY 710 -+#define MSM_BUS_SLAVE_PIMEM 711 -+#define MSM_BUS_SLAVE_SNOC_VMEM 712 -+#define MSM_BUS_SLAVE_PCIE_2 713 -+#define MSM_BUS_SLAVE_RBCPR_MX 714 -+#define MSM_BUS_SLAVE_RBCPR_CX 715 -+#define MSM_BUS_SLAVE_PRNG_APU_CFG 716 -+#define MSM_BUS_SLAVE_PERIPH_MPU_CFG 717 -+#define MSM_BUS_SLAVE_GCNT 718 -+#define MSM_BUS_SLAVE_ADSS_CFG 719 -+#define MSM_BUS_SLAVE_ADSS_VMIDMT_CFG 720 -+#define MSM_BUS_SLAVE_QHSS_APU_CFG 721 -+#define MSM_BUS_SLAVE_MDIO 722 -+#define MSM_BUS_SLAVE_FEPHY_CFG 723 -+#define MSM_BUS_SLAVE_SRIF 724 -+#define MSM_BUS_SLAVE_LAST 730 -+#define MSM_BUS_SLAVE_DDRC_CFG 731 -+#define MSM_BUS_SLAVE_DDRC_APU_CFG 732 -+#define MSM_BUS_SLAVE_MPU0_CFG 733 -+#define MSM_BUS_SLAVE_MPU1_CFG 734 -+#define MSM_BUS_SLAVE_MPU2_CFG 734 -+#define MSM_BUS_SLAVE_ESS_VMIDMT_CFG 735 -+#define MSM_BUS_SLAVE_ESS_APU_CFG 736 -+#define MSM_BUS_SLAVE_USB2_CFG 737 -+#define MSM_BUS_SLAVE_BLSP_CFG 738 -+#define MSM_BUS_SLAVE_QPIC_CFG 739 -+#define MSM_BUS_SLAVE_SDCC_CFG 740 -+#define MSM_BUS_SLAVE_WSS0_VMIDMT_CFG 741 -+#define MSM_BUS_SLAVE_WSS0_APU_CFG 742 -+#define MSM_BUS_SLAVE_WSS1_VMIDMT_CFG 743 -+#define MSM_BUS_SLAVE_WSS1_APU_CFG 744 -+#define MSM_BUS_SLAVE_SRVC_PCNOC 745 -+#define MSM_BUS_SLAVE_SNOC_DDRC 746 -+#define MSM_BUS_SLAVE_A7SS 747 -+#define MSM_BUS_SLAVE_WSS0_CFG 748 -+#define MSM_BUS_SLAVE_WSS1_CFG 749 -+#define MSM_BUS_SLAVE_PCIE 750 -+#define MSM_BUS_SLAVE_USB3_CFG 751 -+#define MSM_BUS_SLAVE_CRYPTO_CFG 752 -+#define MSM_BUS_SLAVE_ESS_CFG 753 -+#define MSM_BUS_SLAVE_SRVC_SNOC 754 -+ -+#define MSM_BUS_SYSTEM_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB -+#define MSM_BUS_CPSS_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_CPSS_FPB -+ -+/* -+ * ID's used in RPM messages -+ */ -+#define ICBID_MASTER_APPSS_PROC 0 -+#define ICBID_MASTER_MSS_PROC 1 -+#define ICBID_MASTER_MNOC_BIMC 2 -+#define ICBID_MASTER_SNOC_BIMC 3 -+#define ICBID_MASTER_SNOC_BIMC_0 ICBID_MASTER_SNOC_BIMC -+#define ICBID_MASTER_CNOC_MNOC_MMSS_CFG 4 -+#define ICBID_MASTER_CNOC_MNOC_CFG 5 -+#define ICBID_MASTER_GFX3D 6 -+#define ICBID_MASTER_JPEG 7 -+#define ICBID_MASTER_MDP 8 -+#define ICBID_MASTER_MDP0 ICBID_MASTER_MDP -+#define ICBID_MASTER_MDPS ICBID_MASTER_MDP -+#define ICBID_MASTER_VIDEO 9 -+#define ICBID_MASTER_VIDEO_P0 ICBID_MASTER_VIDEO -+#define ICBID_MASTER_VIDEO_P1 10 -+#define ICBID_MASTER_VFE 11 -+#define ICBID_MASTER_CNOC_ONOC_CFG 12 -+#define ICBID_MASTER_JPEG_OCMEM 13 -+#define ICBID_MASTER_MDP_OCMEM 14 -+#define ICBID_MASTER_VIDEO_P0_OCMEM 15 -+#define ICBID_MASTER_VIDEO_P1_OCMEM 16 -+#define ICBID_MASTER_VFE_OCMEM 17 -+#define ICBID_MASTER_LPASS_AHB 18 -+#define ICBID_MASTER_QDSS_BAM 19 -+#define ICBID_MASTER_SNOC_CFG 20 -+#define ICBID_MASTER_BIMC_SNOC 21 -+#define ICBID_MASTER_CNOC_SNOC 22 -+#define ICBID_MASTER_CRYPTO 23 -+#define ICBID_MASTER_CRYPTO_CORE0 ICBID_MASTER_CRYPTO -+#define ICBID_MASTER_CRYPTO_CORE1 24 -+#define ICBID_MASTER_LPASS_PROC 25 -+#define ICBID_MASTER_MSS 26 -+#define ICBID_MASTER_MSS_NAV 27 -+#define ICBID_MASTER_OCMEM_DMA 28 -+#define ICBID_MASTER_PNOC_SNOC 29 -+#define ICBID_MASTER_WCSS 30 -+#define ICBID_MASTER_QDSS_ETR 31 -+#define ICBID_MASTER_USB3 32 -+#define ICBID_MASTER_USB3_0 ICBID_MASTER_USB3 -+#define ICBID_MASTER_SDCC_1 33 -+#define ICBID_MASTER_SDCC_3 34 -+#define ICBID_MASTER_SDCC_2 35 -+#define ICBID_MASTER_SDCC_4 36 -+#define ICBID_MASTER_TSIF 37 -+#define ICBID_MASTER_BAM_DMA 38 -+#define ICBID_MASTER_BLSP_2 39 -+#define ICBID_MASTER_USB_HSIC 40 -+#define ICBID_MASTER_BLSP_1 41 -+#define ICBID_MASTER_USB_HS 42 -+#define ICBID_MASTER_USB_HS1 ICBID_MASTER_USB_HS -+#define ICBID_MASTER_PNOC_CFG 43 -+#define ICBID_MASTER_SNOC_PNOC 44 -+#define ICBID_MASTER_RPM_INST 45 -+#define ICBID_MASTER_RPM_DATA 46 -+#define ICBID_MASTER_RPM_SYS 47 -+#define ICBID_MASTER_DEHR 48 -+#define ICBID_MASTER_QDSS_DAP 49 -+#define ICBID_MASTER_SPDM 50 -+#define ICBID_MASTER_TIC 51 -+#define ICBID_MASTER_SNOC_CNOC 52 -+#define ICBID_MASTER_GFX3D_OCMEM 53 -+#define ICBID_MASTER_GFX3D_GMEM ICBID_MASTER_GFX3D_OCMEM -+#define ICBID_MASTER_OVIRT_SNOC 54 -+#define ICBID_MASTER_SNOC_OVIRT 55 -+#define ICBID_MASTER_SNOC_GVIRT ICBID_MASTER_SNOC_OVIRT -+#define ICBID_MASTER_ONOC_OVIRT 56 -+#define ICBID_MASTER_USB_HS2 57 -+#define ICBID_MASTER_QPIC 58 -+#define ICBID_MASTER_IPA 59 -+#define ICBID_MASTER_DSI 60 -+#define ICBID_MASTER_MDP1 61 -+#define ICBID_MASTER_MDPE ICBID_MASTER_MDP1 -+#define ICBID_MASTER_VPU_PROC 62 -+#define ICBID_MASTER_VPU 63 -+#define ICBID_MASTER_VPU0 ICBID_MASTER_VPU -+#define ICBID_MASTER_CRYPTO_CORE2 64 -+#define ICBID_MASTER_PCIE_0 65 -+#define ICBID_MASTER_PCIE_1 66 -+#define ICBID_MASTER_SATA 67 -+#define ICBID_MASTER_UFS 68 -+#define ICBID_MASTER_USB3_1 69 -+#define ICBID_MASTER_VIDEO_OCMEM 70 -+#define ICBID_MASTER_VPU1 71 -+#define ICBID_MASTER_VCAP 72 -+#define ICBID_MASTER_EMAC 73 -+#define ICBID_MASTER_BCAST 74 -+#define ICBID_MASTER_MMSS_PROC 75 -+#define ICBID_MASTER_SNOC_BIMC_1 76 -+#define ICBID_MASTER_SNOC_PCNOC 77 -+#define ICBID_MASTER_AUDIO 78 -+#define ICBID_MASTER_MM_INT_0 79 -+#define ICBID_MASTER_MM_INT_1 80 -+#define ICBID_MASTER_MM_INT_2 81 -+#define ICBID_MASTER_MM_INT_BIMC 82 -+#define ICBID_MASTER_MSS_INT 83 -+#define ICBID_MASTER_PCNOC_CFG 84 -+#define ICBID_MASTER_PCNOC_INT_0 85 -+#define ICBID_MASTER_PCNOC_INT_1 86 -+#define ICBID_MASTER_PCNOC_M_0 87 -+#define ICBID_MASTER_PCNOC_M_1 88 -+#define ICBID_MASTER_PCNOC_S_0 89 -+#define ICBID_MASTER_PCNOC_S_1 90 -+#define ICBID_MASTER_PCNOC_S_2 91 -+#define ICBID_MASTER_PCNOC_S_3 92 -+#define ICBID_MASTER_PCNOC_S_4 93 -+#define ICBID_MASTER_PCNOC_S_6 94 -+#define ICBID_MASTER_PCNOC_S_7 95 -+#define ICBID_MASTER_PCNOC_S_8 96 -+#define ICBID_MASTER_PCNOC_S_9 97 -+#define ICBID_MASTER_QDSS_INT 98 -+#define ICBID_MASTER_SNOC_INT_0 99 -+#define ICBID_MASTER_SNOC_INT_1 100 -+#define ICBID_MASTER_SNOC_INT_BIMC 101 -+#define ICBID_MASTER_TCU_0 102 -+#define ICBID_MASTER_TCU_1 103 -+#define ICBID_MASTER_BIMC_INT_0 104 -+#define ICBID_MASTER_BIMC_INT_1 105 -+#define ICBID_MASTER_CAMERA 106 -+#define ICBID_MASTER_RICA 107 -+#define ICBID_MASTER_PCNOC_S_5 129 -+#define ICBID_MASTER_PCNOC_INT_2 124 -+#define ICBID_MASTER_PCNOC_INT_3 125 -+#define ICBID_MASTER_PCNOC_INT_4 126 -+#define ICBID_MASTER_PCNOC_INT_5 127 -+#define ICBID_MASTER_PCNOC_INT_6 128 -+#define ICBID_MASTER_PCIE_2 119 -+#define ICBID_MASTER_MASTER_CNOC_A1NOC 116 -+#define ICBID_MASTER_A0NOC_SNOC 110 -+#define ICBID_MASTER_A1NOC_SNOC 111 -+#define ICBID_MASTER_A2NOC_SNOC 112 -+#define ICBID_MASTER_PNOC_A1NOC 117 -+#define ICBID_MASTER_ROTATOR 120 -+#define ICBID_MASTER_SNOC_VMEM 114 -+#define ICBID_MASTER_VENUS_VMEM 121 -+#define ICBID_MASTER_HMSS 118 -+#define ICBID_MASTER_BIMC_SNOC_1 109 -+#define ICBID_MASTER_CNOC_A1NOC 116 -+#define ICBID_MASTER_CPP 115 -+#define ICBID_MASTER_BLSP_BAM 130 -+#define ICBID_MASTER_USB2_BAM 131 -+#define ICBID_MASTER_ADSS_DMA0 132 -+#define ICBID_MASTER_ADSS_DMA1 133 -+#define ICBID_MASTER_ADSS_DMA2 134 -+#define ICBID_MASTER_ADSS_DMA3 135 -+#define ICBID_MASTER_QPIC_BAM 136 -+#define ICBID_MASTER_SDCC_BAM 137 -+#define ICBID_MASTER_DDRC_SNOC 138 -+#define ICBID_MASTER_WSS_0 139 -+#define ICBID_MASTER_WSS_1 140 -+#define ICBID_MASTER_ESS 141 -+#define ICBID_MASTER_PCIE 142 -+#define ICBID_MASTER_QDSS_BAMNDP 143 -+#define ICBID_MASTER_QDSS_SNOC_CFG 144 -+ -+#define ICBID_SLAVE_EBI1 0 -+#define ICBID_SLAVE_APPSS_L2 1 -+#define ICBID_SLAVE_BIMC_SNOC 2 -+#define ICBID_SLAVE_CAMERA_CFG 3 -+#define ICBID_SLAVE_DISPLAY_CFG 4 -+#define ICBID_SLAVE_OCMEM_CFG 5 -+#define ICBID_SLAVE_CPR_CFG 6 -+#define ICBID_SLAVE_CPR_XPU_CFG 7 -+#define ICBID_SLAVE_MISC_CFG 8 -+#define ICBID_SLAVE_MISC_XPU_CFG 9 -+#define ICBID_SLAVE_VENUS_CFG 10 -+#define ICBID_SLAVE_GFX3D_CFG 11 -+#define ICBID_SLAVE_MMSS_CLK_CFG 12 -+#define ICBID_SLAVE_MMSS_CLK_XPU_CFG 13 -+#define ICBID_SLAVE_MNOC_MPU_CFG 14 -+#define ICBID_SLAVE_ONOC_MPU_CFG 15 -+#define ICBID_SLAVE_MNOC_BIMC 16 -+#define ICBID_SLAVE_SERVICE_MNOC 17 -+#define ICBID_SLAVE_OCMEM 18 -+#define ICBID_SLAVE_GMEM ICBID_SLAVE_OCMEM -+#define ICBID_SLAVE_SERVICE_ONOC 19 -+#define ICBID_SLAVE_APPSS 20 -+#define ICBID_SLAVE_LPASS 21 -+#define ICBID_SLAVE_USB3 22 -+#define ICBID_SLAVE_USB3_0 ICBID_SLAVE_USB3 -+#define ICBID_SLAVE_WCSS 23 -+#define ICBID_SLAVE_SNOC_BIMC 24 -+#define ICBID_SLAVE_SNOC_BIMC_0 ICBID_SLAVE_SNOC_BIMC -+#define ICBID_SLAVE_SNOC_CNOC 25 -+#define ICBID_SLAVE_IMEM 26 -+#define ICBID_SLAVE_OCIMEM ICBID_SLAVE_IMEM -+#define ICBID_SLAVE_SNOC_OVIRT 27 -+#define ICBID_SLAVE_SNOC_GVIRT ICBID_SLAVE_SNOC_OVIRT -+#define ICBID_SLAVE_SNOC_PNOC 28 -+#define ICBID_SLAVE_SNOC_PCNOC ICBID_SLAVE_SNOC_PNOC -+#define ICBID_SLAVE_SERVICE_SNOC 29 -+#define ICBID_SLAVE_QDSS_STM 30 -+#define ICBID_SLAVE_SDCC_1 31 -+#define ICBID_SLAVE_SDCC_3 32 -+#define ICBID_SLAVE_SDCC_2 33 -+#define ICBID_SLAVE_SDCC_4 34 -+#define ICBID_SLAVE_TSIF 35 -+#define ICBID_SLAVE_BAM_DMA 36 -+#define ICBID_SLAVE_BLSP_2 37 -+#define ICBID_SLAVE_USB_HSIC 38 -+#define ICBID_SLAVE_BLSP_1 39 -+#define ICBID_SLAVE_USB_HS 40 -+#define ICBID_SLAVE_USB_HS1 ICBID_SLAVE_USB_HS -+#define ICBID_SLAVE_PDM 41 -+#define ICBID_SLAVE_PERIPH_APU_CFG 42 -+#define ICBID_SLAVE_PNOC_MPU_CFG 43 -+#define ICBID_SLAVE_PRNG 44 -+#define ICBID_SLAVE_PNOC_SNOC 45 -+#define ICBID_SLAVE_PCNOC_SNOC ICBID_SLAVE_PNOC_SNOC -+#define ICBID_SLAVE_SERVICE_PNOC 46 -+#define ICBID_SLAVE_CLK_CTL 47 -+#define ICBID_SLAVE_CNOC_MSS 48 -+#define ICBID_SLAVE_PCNOC_MSS ICBID_SLAVE_CNOC_MSS -+#define ICBID_SLAVE_SECURITY 49 -+#define ICBID_SLAVE_TCSR 50 -+#define ICBID_SLAVE_TLMM 51 -+#define ICBID_SLAVE_CRYPTO_0_CFG 52 -+#define ICBID_SLAVE_CRYPTO_1_CFG 53 -+#define ICBID_SLAVE_IMEM_CFG 54 -+#define ICBID_SLAVE_MESSAGE_RAM 55 -+#define ICBID_SLAVE_BIMC_CFG 56 -+#define ICBID_SLAVE_BOOT_ROM 57 -+#define ICBID_SLAVE_CNOC_MNOC_MMSS_CFG 58 -+#define ICBID_SLAVE_PMIC_ARB 59 -+#define ICBID_SLAVE_SPDM_WRAPPER 60 -+#define ICBID_SLAVE_DEHR_CFG 61 -+#define ICBID_SLAVE_MPM 62 -+#define ICBID_SLAVE_QDSS_CFG 63 -+#define ICBID_SLAVE_RBCPR_CFG 64 -+#define ICBID_SLAVE_RBCPR_CX_CFG ICBID_SLAVE_RBCPR_CFG -+#define ICBID_SLAVE_RBCPR_QDSS_APU_CFG 65 -+#define ICBID_SLAVE_CNOC_MNOC_CFG 66 -+#define ICBID_SLAVE_SNOC_MPU_CFG 67 -+#define ICBID_SLAVE_CNOC_ONOC_CFG 68 -+#define ICBID_SLAVE_PNOC_CFG 69 -+#define ICBID_SLAVE_SNOC_CFG 70 -+#define ICBID_SLAVE_EBI1_DLL_CFG 71 -+#define ICBID_SLAVE_PHY_APU_CFG 72 -+#define ICBID_SLAVE_EBI1_PHY_CFG 73 -+#define ICBID_SLAVE_RPM 74 -+#define ICBID_SLAVE_CNOC_SNOC 75 -+#define ICBID_SLAVE_SERVICE_CNOC 76 -+#define ICBID_SLAVE_OVIRT_SNOC 77 -+#define ICBID_SLAVE_OVIRT_OCMEM 78 -+#define ICBID_SLAVE_USB_HS2 79 -+#define ICBID_SLAVE_QPIC 80 -+#define ICBID_SLAVE_IPS_CFG 81 -+#define ICBID_SLAVE_DSI_CFG 82 -+#define ICBID_SLAVE_USB3_1 83 -+#define ICBID_SLAVE_PCIE_0 84 -+#define ICBID_SLAVE_PCIE_1 85 -+#define ICBID_SLAVE_PSS_SMMU_CFG 86 -+#define ICBID_SLAVE_CRYPTO_2_CFG 87 -+#define ICBID_SLAVE_PCIE_0_CFG 88 -+#define ICBID_SLAVE_PCIE_1_CFG 89 -+#define ICBID_SLAVE_SATA_CFG 90 -+#define ICBID_SLAVE_SPSS_GENI_IR 91 -+#define ICBID_SLAVE_UFS_CFG 92 -+#define ICBID_SLAVE_AVSYNC_CFG 93 -+#define ICBID_SLAVE_VPU_CFG 94 -+#define ICBID_SLAVE_USB_PHY_CFG 95 -+#define ICBID_SLAVE_RBCPR_MX_CFG 96 -+#define ICBID_SLAVE_PCIE_PARF 97 -+#define ICBID_SLAVE_VCAP_CFG 98 -+#define ICBID_SLAVE_EMAC_CFG 99 -+#define ICBID_SLAVE_BCAST_CFG 100 -+#define ICBID_SLAVE_KLM_CFG 101 -+#define ICBID_SLAVE_DISPLAY_PWM 102 -+#define ICBID_SLAVE_GENI 103 -+#define ICBID_SLAVE_SNOC_BIMC_1 104 -+#define ICBID_SLAVE_AUDIO 105 -+#define ICBID_SLAVE_CATS_0 106 -+#define ICBID_SLAVE_CATS_1 107 -+#define ICBID_SLAVE_MM_INT_0 108 -+#define ICBID_SLAVE_MM_INT_1 109 -+#define ICBID_SLAVE_MM_INT_2 110 -+#define ICBID_SLAVE_MM_INT_BIMC 111 -+#define ICBID_SLAVE_MMU_MODEM_XPU_CFG 112 -+#define ICBID_SLAVE_MSS_INT 113 -+#define ICBID_SLAVE_PCNOC_INT_0 114 -+#define ICBID_SLAVE_PCNOC_INT_1 115 -+#define ICBID_SLAVE_PCNOC_M_0 116 -+#define ICBID_SLAVE_PCNOC_M_1 117 -+#define ICBID_SLAVE_PCNOC_S_0 118 -+#define ICBID_SLAVE_PCNOC_S_1 119 -+#define ICBID_SLAVE_PCNOC_S_2 120 -+#define ICBID_SLAVE_PCNOC_S_3 121 -+#define ICBID_SLAVE_PCNOC_S_4 122 -+#define ICBID_SLAVE_PCNOC_S_6 123 -+#define ICBID_SLAVE_PCNOC_S_7 124 -+#define ICBID_SLAVE_PCNOC_S_8 125 -+#define ICBID_SLAVE_PCNOC_S_9 126 -+#define ICBID_SLAVE_PRNG_XPU_CFG 127 -+#define ICBID_SLAVE_QDSS_INT 128 -+#define ICBID_SLAVE_RPM_XPU_CFG 129 -+#define ICBID_SLAVE_SNOC_INT_0 130 -+#define ICBID_SLAVE_SNOC_INT_1 131 -+#define ICBID_SLAVE_SNOC_INT_BIMC 132 -+#define ICBID_SLAVE_TCU 133 -+#define ICBID_SLAVE_BIMC_INT_0 134 -+#define ICBID_SLAVE_BIMC_INT_1 135 -+#define ICBID_SLAVE_RICA_CFG 136 -+#define ICBID_SLAVE_PCNOC_S_5 189 -+#define ICBID_SLAVE_PCNOC_S_7 124 -+#define ICBID_SLAVE_PCNOC_INT_2 184 -+#define ICBID_SLAVE_PCNOC_INT_3 185 -+#define ICBID_SLAVE_PCNOC_INT_4 186 -+#define ICBID_SLAVE_PCNOC_INT_5 187 -+#define ICBID_SLAVE_PCNOC_INT_6 188 -+#define ICBID_SLAVE_USB3_PHY_CFG 182 -+#define ICBID_SLAVE_IPA_CFG 183 -+ -+#define ICBID_SLAVE_A0NOC_SNOC 141 -+#define ICBID_SLAVE_A1NOC_SNOC 142 -+#define ICBID_SLAVE_A2NOC_SNOC 143 -+#define ICBID_SLAVE_BIMC_SNOC_1 138 -+#define ICBID_SLAVE_PIMEM 167 -+#define ICBID_SLAVE_PIMEM_CFG 168 -+#define ICBID_SLAVE_DCC_CFG 155 -+#define ICBID_SLAVE_QDSS_RBCPR_APU_CFG 168 -+#define ICBID_SLAVE_A0NOC_CFG 144 -+#define ICBID_SLAVE_PCIE_2_CFG 165 -+#define ICBID_SLAVE_PCIE20_AHB2PHY 163 -+#define ICBID_SLAVE_PCIE_2 164 -+#define ICBID_SLAVE_A1NOC_CFG 147 -+#define ICBID_SLAVE_A1NOC_MPU_CFG 148 -+#define ICBID_SLAVE_A1NOC_SMMU_CFG 149 -+#define ICBID_SLAVE_A2NOC_CFG 150 -+#define ICBID_SLAVE_A2NOC_MPU_CFG 151 -+#define ICBID_SLAVE_A2NOC_SMMU_CFG 152 -+#define ICBID_SLAVE_AHB2PHY 153 -+#define ICBID_SLAVE_HMSS_L3 161 -+#define ICBID_SLAVE_LPASS_SMMU_CFG 161 -+#define ICBID_SLAVE_MMAGIC_CFG 162 -+#define ICBID_SLAVE_SSC_CFG 177 -+#define ICBID_SLAVE_VENUS_THROTTLE_CFG 178 -+#define ICBID_SLAVE_DISPLAY_THROTTLE_CFG 156 -+#define ICBID_SLAVE_CAMERA_THROTTLE_CFG 154 -+#define ICBID_SLAVE_DSA_CFG 157 -+#define ICBID_SLAVE_DSA_MPU_CFG 158 -+#define ICBID_SLAVE_SMMU_CPP_CFG 171 -+#define ICBID_SLAVE_SMMU_JPEG_CFG 172 -+#define ICBID_SLAVE_SMMU_MDP_CFG 173 -+#define ICBID_SLAVE_SMMU_ROTATOR_CFG 174 -+#define ICBID_SLAVE_SMMU_VENUS_CFG 175 -+#define ICBID_SLAVE_SMMU_VFE_CFG 176 -+#define ICBID_SLAVE_A0NOC_MPU_CFG 145 -+#define ICBID_SLAVE_A0NOC_SMMU_CFG 146 -+#define ICBID_SLAVE_VMEM_CFG 180 -+#define ICBID_SLAVE_VMEM 179 -+#define ICBID_SLAVE_PNOC_A1NOC 139 -+#define ICBID_SLAVE_SNOC_VMEM 140 -+#define ICBID_SLAVE_RBCPR_MX 170 -+#define ICBID_SLAVE_RBCPR_CX 169 -+#define ICBID_SLAVE_PRNG_APU_CFG 190 -+#define ICBID_SLAVE_PERIPH_MPU_CFG 191 -+#define ICBID_SLAVE_GCNT 192 -+#define ICBID_SLAVE_ADSS_CFG 193 -+#define ICBID_SLAVE_ADSS_APU 194 -+#define ICBID_SLAVE_ADSS_VMIDMT_CFG 195 -+#define ICBID_SLAVE_QHSS_APU_CFG 196 -+#define ICBID_SLAVE_MDIO 197 -+#define ICBID_SLAVE_FEPHY_CFG 198 -+#define ICBID_SLAVE_SRIF 199 -+#define ICBID_SLAVE_DDRC_CFG 200 -+#define ICBID_SLAVE_DDRC_APU_CFG 201 -+#define ICBID_SLAVE_DDRC_MPU0_CFG 202 -+#define ICBID_SLAVE_DDRC_MPU1_CFG 203 -+#define ICBID_SLAVE_DDRC_MPU2_CFG 210 -+#define ICBID_SLAVE_ESS_VMIDMT_CFG 211 -+#define ICBID_SLAVE_ESS_APU_CFG 212 -+#define ICBID_SLAVE_USB2_CFG 213 -+#define ICBID_SLAVE_BLSP_CFG 214 -+#define ICBID_SLAVE_QPIC_CFG 215 -+#define ICBID_SLAVE_SDCC_CFG 216 -+#define ICBID_SLAVE_WSS0_VMIDMT_CFG 217 -+#define ICBID_SLAVE_WSS0_APU_CFG 218 -+#define ICBID_SLAVE_WSS1_VMIDMT_CFG 219 -+#define ICBID_SLAVE_WSS1_APU_CFG 220 -+#define ICBID_SLAVE_SRVC_PCNOC 221 -+#define ICBID_SLAVE_SNOC_DDRC 222 -+#define ICBID_SLAVE_A7SS 223 -+#define ICBID_SLAVE_WSS0_CFG 224 -+#define ICBID_SLAVE_WSS1_CFG 225 -+#define ICBID_SLAVE_PCIE 226 -+#define ICBID_SLAVE_USB3_CFG 227 -+#define ICBID_SLAVE_CRYPTO_CFG 228 -+#define ICBID_SLAVE_ESS_CFG 229 -+#define ICBID_SLAVE_SRVC_SNOC 230 -+#endif ---- /dev/null -+++ b/include/dt-bindings/msm/msm-bus-rule-ops.h -@@ -0,0 +1,32 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef __MSM_BUS_RULE_OPS_H -+#define __MSM_BUS_RULE_OPS_H -+ -+#define FLD_IB 0 -+#define FLD_AB 1 -+#define FLD_CLK 2 -+ -+#define OP_LE 0 -+#define OP_LT 1 -+#define OP_GE 2 -+#define OP_GT 3 -+#define OP_NOOP 4 -+ -+#define RULE_STATE_NOT_APPLIED 0 -+#define RULE_STATE_APPLIED 1 -+ -+#define THROTTLE_ON 0 -+#define THROTTLE_OFF 1 -+ -+#endif ---- /dev/null -+++ b/drivers/bus/msm_bus/Kconfig -@@ -0,0 +1,19 @@ -+config BUS_TOPOLOGY_ADHOC -+ bool "ad-hoc bus scaling topology" -+ depends on ARCH_QCOM -+ default n -+ help -+ This option enables a driver that can handle adhoc bus topologies. -+ Adhoc bus topology driver allows one to many connections and maintains -+ directionality of connections by explicitly listing device connections -+ thus avoiding illegal routes. -+ -+config MSM_BUS_SCALING -+ bool "Bus scaling driver" -+ depends on BUS_TOPOLOGY_ADHOC -+ default n -+ help -+ This option enables bus scaling on MSM devices. Bus scaling -+ allows devices to request the clocks be set to rates sufficient -+ for the active devices needs without keeping the clocks at max -+ frequency when a slower speed is sufficient. ---- /dev/null -+++ b/drivers/bus/msm_bus/Makefile -@@ -0,0 +1,12 @@ -+# -+# Makefile for msm-bus driver specific files -+# -+obj-y += msm_bus_bimc.o msm_bus_noc.o msm_bus_core.o msm_bus_client_api.o \ -+ msm_bus_id.o -+obj-$(CONFIG_OF) += msm_bus_of.o -+ -+obj-y += msm_bus_fabric_adhoc.o msm_bus_arb_adhoc.o msm_bus_rules.o -+obj-$(CONFIG_OF) += msm_bus_of_adhoc.o -+obj-$(CONFIG_CORESIGHT) += msm_buspm_coresight_adhoc.o -+ -+obj-$(CONFIG_DEBUG_FS) += msm_bus_dbg.o ---- /dev/null -+++ b/drivers/bus/msm_bus/msm-bus-board.h -@@ -0,0 +1,198 @@ -+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef __ASM_ARCH_MSM_BUS_BOARD_H -+#define __ASM_ARCH_MSM_BUS_BOARD_H -+ -+#include -+#include -+ -+enum context { -+ DUAL_CTX, -+ ACTIVE_CTX, -+ NUM_CTX -+}; -+ -+struct msm_bus_fabric_registration { -+ unsigned int id; -+ const char *name; -+ struct msm_bus_node_info *info; -+ unsigned int len; -+ int ahb; -+ const char *fabclk[NUM_CTX]; -+ const char *iface_clk; -+ unsigned int offset; -+ unsigned int haltid; -+ unsigned int rpm_enabled; -+ unsigned int nmasters; -+ unsigned int nslaves; -+ unsigned int ntieredslaves; -+ bool il_flag; -+ const struct msm_bus_board_algorithm *board_algo; -+ int hw_sel; -+ void *hw_data; -+ uint32_t qos_freq; -+ uint32_t qos_baseoffset; -+ u64 nr_lim_thresh; -+ uint32_t eff_fact; -+ uint32_t qos_delta; -+ bool virt; -+}; -+ -+struct msm_bus_device_node_registration { -+ struct msm_bus_node_device_type *info; -+ unsigned int num_devices; -+ bool virt; -+}; -+ -+enum msm_bus_bw_tier_type { -+ MSM_BUS_BW_TIER1 = 1, -+ MSM_BUS_BW_TIER2, -+ MSM_BUS_BW_COUNT, -+ MSM_BUS_BW_SIZE = 0x7FFFFFFF, -+}; -+ -+struct msm_bus_halt_vector { -+ uint32_t haltval; -+ uint32_t haltmask; -+}; -+ -+extern struct msm_bus_fabric_registration msm_bus_apps_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_sys_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_mm_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_sys_fpb_pdata; -+extern struct msm_bus_fabric_registration msm_bus_cpss_fpb_pdata; -+extern struct msm_bus_fabric_registration msm_bus_def_fab_pdata; -+ -+extern struct msm_bus_fabric_registration msm_bus_8960_apps_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8960_sys_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8960_mm_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8960_sg_mm_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8960_sys_fpb_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8960_cpss_fpb_pdata; -+ -+extern struct msm_bus_fabric_registration msm_bus_8064_apps_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8064_sys_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8064_mm_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8064_sys_fpb_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8064_cpss_fpb_pdata; -+ -+extern struct msm_bus_fabric_registration msm_bus_9615_sys_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_9615_def_fab_pdata; -+ -+extern struct msm_bus_fabric_registration msm_bus_8930_apps_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8930_sys_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8930_mm_fabric_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8930_sys_fpb_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8930_cpss_fpb_pdata; -+ -+extern struct msm_bus_fabric_registration msm_bus_8974_sys_noc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8974_mmss_noc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8974_bimc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_noc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8974_periph_noc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8974_config_noc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_vnoc_pdata; -+ -+extern struct msm_bus_fabric_registration msm_bus_9625_sys_noc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_9625_bimc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_9625_periph_noc_pdata; -+extern struct msm_bus_fabric_registration msm_bus_9625_config_noc_pdata; -+ -+extern int msm_bus_device_match_adhoc(struct device *dev, void *id); -+ -+void msm_bus_rpm_set_mt_mask(void); -+int msm_bus_board_rpm_get_il_ids(uint16_t *id); -+int msm_bus_board_get_iid(int id); -+ -+#define NFAB_MSM8226 6 -+#define NFAB_MSM8610 5 -+ -+/* -+ * These macros specify the convention followed for allocating -+ * ids to fabrics, masters and slaves for 8x60. -+ * -+ * A node can be identified as a master/slave/fabric by using -+ * these ids. -+ */ -+#define FABRIC_ID_KEY 1024 -+#define SLAVE_ID_KEY ((FABRIC_ID_KEY) >> 1) -+#define MAX_FAB_KEY 7168 /* OR(All fabric ids) */ -+#define INT_NODE_START 10000 -+ -+#define GET_FABID(id) ((id) & MAX_FAB_KEY) -+ -+#define NODE_ID(id) ((id) & (FABRIC_ID_KEY - 1)) -+#define IS_SLAVE(id) ((NODE_ID(id)) >= SLAVE_ID_KEY ? 1 : 0) -+#define CHECK_ID(iid, id) (((iid & id) != id) ? -ENXIO : iid) -+ -+/* -+ * The following macros are used to format the data for port halt -+ * and unhalt requests. -+ */ -+#define MSM_BUS_CLK_HALT 0x1 -+#define MSM_BUS_CLK_HALT_MASK 0x1 -+#define MSM_BUS_CLK_HALT_FIELDSIZE 0x1 -+#define MSM_BUS_CLK_UNHALT 0x0 -+ -+#define MSM_BUS_MASTER_SHIFT(master, fieldsize) \ -+ ((master) * (fieldsize)) -+ -+#define MSM_BUS_SET_BITFIELD(word, fieldmask, fieldvalue) \ -+ { \ -+ (word) &= ~(fieldmask); \ -+ (word) |= (fieldvalue); \ -+ } -+ -+ -+#define MSM_BUS_MASTER_HALT(u32haltmask, u32haltval, master) \ -+ MSM_BUS_SET_BITFIELD(u32haltmask, \ -+ MSM_BUS_CLK_HALT_MASK< -+ -+ -+#endif /*__ASM_ARCH_MSM_BUS_BOARD_H */ ---- /dev/null -+++ b/drivers/bus/msm_bus/msm-bus.h -@@ -0,0 +1,139 @@ -+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef _ARCH_ARM_MACH_MSM_BUS_H -+#define _ARCH_ARM_MACH_MSM_BUS_H -+ -+#include -+#include -+#include -+ -+/* -+ * Macros for clients to convert their data to ib and ab -+ * Ws : Time window over which to transfer the data in SECONDS -+ * Bs : Size of the data block in bytes -+ * Per : Recurrence period -+ * Tb : Throughput bandwidth to prevent stalling -+ * R : Ratio of actual bandwidth used to Tb -+ * Ib : Instantaneous bandwidth -+ * Ab : Arbitrated bandwidth -+ * -+ * IB_RECURRBLOCK and AB_RECURRBLOCK: -+ * These are used if the requirement is to transfer a -+ * recurring block of data over a known time window. -+ * -+ * IB_THROUGHPUTBW and AB_THROUGHPUTBW: -+ * These are used for CPU style masters. Here the requirement -+ * is to have minimum throughput bandwidth available to avoid -+ * stalling. -+ */ -+#define IB_RECURRBLOCK(Ws, Bs) ((Ws) == 0 ? 0 : ((Bs)/(Ws))) -+#define AB_RECURRBLOCK(Ws, Per) ((Ws) == 0 ? 0 : ((Bs)/(Per))) -+#define IB_THROUGHPUTBW(Tb) (Tb) -+#define AB_THROUGHPUTBW(Tb, R) ((Tb) * (R)) -+ -+struct msm_bus_vectors { -+ int src; /* Master */ -+ int dst; /* Slave */ -+ uint64_t ab; /* Arbitrated bandwidth */ -+ uint64_t ib; /* Instantaneous bandwidth */ -+}; -+ -+struct msm_bus_paths { -+ int num_paths; -+ struct msm_bus_vectors *vectors; -+}; -+ -+struct msm_bus_scale_pdata { -+ struct msm_bus_paths *usecase; -+ int num_usecases; -+ const char *name; -+ /* -+ * If the active_only flag is set to 1, the BW request is applied -+ * only when at least one CPU is active (powered on). If the flag -+ * is set to 0, then the BW request is always applied irrespective -+ * of the CPU state. -+ */ -+ unsigned int active_only; -+}; -+ -+/* Scaling APIs */ -+ -+/* -+ * This function returns a handle to the client. This should be used to -+ * call msm_bus_scale_client_update_request. -+ * The function returns 0 if bus driver is unable to register a client -+ */ -+ -+#if (defined(CONFIG_MSM_BUS_SCALING) || defined(CONFIG_BUS_TOPOLOGY_ADHOC)) -+int __init msm_bus_fabric_init_driver(void); -+uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata); -+int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index); -+void msm_bus_scale_unregister_client(uint32_t cl); -+/* AXI Port configuration APIs */ -+int msm_bus_axi_porthalt(int master_port); -+int msm_bus_axi_portunhalt(int master_port); -+ -+#else -+static inline int __init msm_bus_fabric_init_driver(void) { return 0; } -+ -+static inline uint32_t -+msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata) -+{ -+ return 1; -+} -+ -+static inline int -+msm_bus_scale_client_update_request(uint32_t cl, unsigned int index) -+{ -+ return 0; -+} -+ -+static inline void -+msm_bus_scale_unregister_client(uint32_t cl) -+{ -+} -+ -+static inline int msm_bus_axi_porthalt(int master_port) -+{ -+ return 0; -+} -+ -+static inline int msm_bus_axi_portunhalt(int master_port) -+{ -+ return 0; -+} -+#endif -+ -+#if defined(CONFIG_OF) && defined(CONFIG_MSM_BUS_SCALING) -+struct msm_bus_scale_pdata *msm_bus_pdata_from_node( -+ struct platform_device *pdev, struct device_node *of_node); -+struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev); -+void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata); -+#else -+static inline struct msm_bus_scale_pdata -+*msm_bus_cl_get_pdata(struct platform_device *pdev) -+{ -+ return NULL; -+} -+ -+static inline struct msm_bus_scale_pdata *msm_bus_pdata_from_node( -+ struct platform_device *pdev, struct device_node *of_node) -+{ -+ return NULL; -+} -+ -+static inline void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata) -+{ -+} -+#endif -+#endif /*_ARCH_ARM_MACH_MSM_BUS_H*/ ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_adhoc.h -@@ -0,0 +1,141 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef _ARCH_ARM_MACH_MSM_BUS_ADHOC_H -+#define _ARCH_ARM_MACH_MSM_BUS_ADHOC_H -+ -+#include -+#include -+#include "msm-bus-board.h" -+#include "msm-bus.h" -+#include "msm_bus_rules.h" -+#include "msm_bus_core.h" -+ -+struct msm_bus_node_device_type; -+struct link_node { -+ uint64_t lnode_ib[NUM_CTX]; -+ uint64_t lnode_ab[NUM_CTX]; -+ int next; -+ struct device *next_dev; -+ struct list_head link; -+ uint32_t in_use; -+}; -+ -+/* New types introduced for adhoc topology */ -+struct msm_bus_noc_ops { -+ int (*qos_init)(struct msm_bus_node_device_type *dev, -+ void __iomem *qos_base, uint32_t qos_off, -+ uint32_t qos_delta, uint32_t qos_freq); -+ int (*set_bw)(struct msm_bus_node_device_type *dev, -+ void __iomem *qos_base, uint32_t qos_off, -+ uint32_t qos_delta, uint32_t qos_freq); -+ int (*limit_mport)(struct msm_bus_node_device_type *dev, -+ void __iomem *qos_base, uint32_t qos_off, -+ uint32_t qos_delta, uint32_t qos_freq, bool enable_lim, -+ uint64_t lim_bw); -+ bool (*update_bw_reg)(int mode); -+}; -+ -+struct nodebw { -+ uint64_t ab[NUM_CTX]; -+ bool dirty; -+}; -+ -+struct msm_bus_fab_device_type { -+ void __iomem *qos_base; -+ phys_addr_t pqos_base; -+ size_t qos_range; -+ uint32_t base_offset; -+ uint32_t qos_freq; -+ uint32_t qos_off; -+ uint32_t util_fact; -+ uint32_t vrail_comp; -+ struct msm_bus_noc_ops noc_ops; -+ enum msm_bus_hw_sel bus_type; -+ bool bypass_qos_prg; -+}; -+ -+struct qos_params_type { -+ int mode; -+ unsigned int prio_lvl; -+ unsigned int prio_rd; -+ unsigned int prio_wr; -+ unsigned int prio1; -+ unsigned int prio0; -+ unsigned int gp; -+ unsigned int thmp; -+ unsigned int ws; -+ int cur_mode; -+ u64 bw_buffer; -+}; -+ -+struct msm_bus_node_info_type { -+ const char *name; -+ unsigned int id; -+ int mas_rpm_id; -+ int slv_rpm_id; -+ int num_ports; -+ int num_qports; -+ int *qport; -+ struct qos_params_type qos_params; -+ unsigned int num_connections; -+ unsigned int num_blist; -+ bool is_fab_dev; -+ bool virt_dev; -+ bool is_traversed; -+ unsigned int *connections; -+ unsigned int *black_listed_connections; -+ struct device **dev_connections; -+ struct device **black_connections; -+ unsigned int bus_device_id; -+ struct device *bus_device; -+ unsigned int buswidth; -+ struct rule_update_path_info rule; -+ uint64_t lim_bw; -+ uint32_t util_fact; -+ uint32_t vrail_comp; -+}; -+ -+struct msm_bus_node_device_type { -+ struct msm_bus_node_info_type *node_info; -+ struct msm_bus_fab_device_type *fabdev; -+ int num_lnodes; -+ struct link_node *lnode_list; -+ uint64_t cur_clk_hz[NUM_CTX]; -+ struct nodebw node_ab; -+ struct list_head link; -+ unsigned int ap_owned; -+ struct nodeclk clk[NUM_CTX]; -+ struct nodeclk qos_clk; -+}; -+ -+int msm_bus_enable_limiter(struct msm_bus_node_device_type *nodedev, -+ bool throttle_en, uint64_t lim_bw); -+int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev, -+ int ctx, int **dirty_nodes, int *num_dirty); -+int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty); -+int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx, -+ int64_t add_bw, int **dirty_nodes, int *num_dirty); -+void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size, -+ size_t new_size, gfp_t flags); -+ -+extern struct msm_bus_device_node_registration -+ *msm_bus_of_to_pdata(struct platform_device *pdev); -+extern void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops); -+extern int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev); -+extern int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev); -+extern int msm_bus_of_get_static_rules(struct platform_device *pdev, -+ struct bus_rule_type **static_rule); -+extern int msm_rules_update_path(struct list_head *input_list, -+ struct list_head *output_list); -+extern void print_all_rules(void); -+#endif /* _ARCH_ARM_MACH_MSM_BUS_ADHOC_H */ ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_arb_adhoc.c -@@ -0,0 +1,998 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is Mree software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "msm-bus.h" -+#include "msm_bus_core.h" -+#include "msm_bus_adhoc.h" -+ -+#define NUM_CL_HANDLES 50 -+#define NUM_LNODES 3 -+ -+struct bus_search_type { -+ struct list_head link; -+ struct list_head node_list; -+}; -+ -+struct handle_type { -+ int num_entries; -+ struct msm_bus_client **cl_list; -+}; -+ -+static struct handle_type handle_list; -+struct list_head input_list; -+struct list_head apply_list; -+ -+DEFINE_MUTEX(msm_bus_adhoc_lock); -+ -+static bool chk_bl_list(struct list_head *black_list, unsigned int id) -+{ -+ struct msm_bus_node_device_type *bus_node = NULL; -+ -+ list_for_each_entry(bus_node, black_list, link) { -+ if (bus_node->node_info->id == id) -+ return true; -+ } -+ return false; -+} -+ -+static void copy_remaining_nodes(struct list_head *edge_list, struct list_head -+ *traverse_list, struct list_head *route_list) -+{ -+ struct bus_search_type *search_node; -+ -+ if (list_empty(edge_list) && list_empty(traverse_list)) -+ return; -+ -+ search_node = kzalloc(sizeof(struct bus_search_type), GFP_KERNEL); -+ INIT_LIST_HEAD(&search_node->node_list); -+ list_splice_init(edge_list, traverse_list); -+ list_splice_init(traverse_list, &search_node->node_list); -+ list_add_tail(&search_node->link, route_list); -+} -+ -+/* -+ * Duplicate instantiaion from msm_bus_arb.c. Todo there needs to be a -+ * "util" file for these common func/macros. -+ * -+ * */ -+uint64_t msm_bus_div64(unsigned int w, uint64_t bw) -+{ -+ uint64_t *b = &bw; -+ -+ if ((bw > 0) && (bw < w)) -+ return 1; -+ -+ switch (w) { -+ case 0: -+ WARN(1, "AXI: Divide by 0 attempted\n"); -+ case 1: return bw; -+ case 2: return (bw >> 1); -+ case 4: return (bw >> 2); -+ case 8: return (bw >> 3); -+ case 16: return (bw >> 4); -+ case 32: return (bw >> 5); -+ } -+ -+ do_div(*b, w); -+ return *b; -+} -+ -+int msm_bus_device_match_adhoc(struct device *dev, void *id) -+{ -+ int ret = 0; -+ struct msm_bus_node_device_type *bnode = dev->platform_data; -+ -+ if (bnode) -+ ret = (bnode->node_info->id == *(unsigned int *)id); -+ else -+ ret = 0; -+ -+ return ret; -+} -+ -+static int gen_lnode(struct device *dev, -+ int next_hop, int prev_idx) -+{ -+ struct link_node *lnode; -+ struct msm_bus_node_device_type *cur_dev = NULL; -+ int lnode_idx = -1; -+ -+ if (!dev) -+ goto exit_gen_lnode; -+ -+ cur_dev = dev->platform_data; -+ if (!cur_dev) { -+ MSM_BUS_ERR("%s: Null device ptr", __func__); -+ goto exit_gen_lnode; -+ } -+ -+ if (!cur_dev->num_lnodes) { -+ cur_dev->lnode_list = devm_kzalloc(dev, -+ sizeof(struct link_node) * NUM_LNODES, -+ GFP_KERNEL); -+ if (!cur_dev->lnode_list) -+ goto exit_gen_lnode; -+ -+ lnode = cur_dev->lnode_list; -+ cur_dev->num_lnodes = NUM_LNODES; -+ lnode_idx = 0; -+ } else { -+ int i; -+ for (i = 0; i < cur_dev->num_lnodes; i++) { -+ if (!cur_dev->lnode_list[i].in_use) -+ break; -+ } -+ -+ if (i < cur_dev->num_lnodes) { -+ lnode = &cur_dev->lnode_list[i]; -+ lnode_idx = i; -+ } else { -+ struct link_node *realloc_list; -+ size_t cur_size = sizeof(struct link_node) * -+ cur_dev->num_lnodes; -+ -+ cur_dev->num_lnodes += NUM_LNODES; -+ realloc_list = msm_bus_realloc_devmem( -+ dev, -+ cur_dev->lnode_list, -+ cur_size, -+ sizeof(struct link_node) * -+ cur_dev->num_lnodes, GFP_KERNEL); -+ -+ if (!realloc_list) -+ goto exit_gen_lnode; -+ -+ cur_dev->lnode_list = realloc_list; -+ lnode = &cur_dev->lnode_list[i]; -+ lnode_idx = i; -+ } -+ } -+ -+ lnode->in_use = 1; -+ if (next_hop == cur_dev->node_info->id) { -+ lnode->next = -1; -+ lnode->next_dev = NULL; -+ } else { -+ lnode->next = prev_idx; -+ lnode->next_dev = bus_find_device(&msm_bus_type, NULL, -+ (void *) &next_hop, -+ msm_bus_device_match_adhoc); -+ } -+ -+ memset(lnode->lnode_ib, 0, sizeof(uint64_t) * NUM_CTX); -+ memset(lnode->lnode_ab, 0, sizeof(uint64_t) * NUM_CTX); -+ -+exit_gen_lnode: -+ return lnode_idx; -+} -+ -+static int remove_lnode(struct msm_bus_node_device_type *cur_dev, -+ int lnode_idx) -+{ -+ int ret = 0; -+ -+ if (!cur_dev) { -+ MSM_BUS_ERR("%s: Null device ptr", __func__); -+ ret = -ENODEV; -+ goto exit_remove_lnode; -+ } -+ -+ if (lnode_idx != -1) { -+ if (!cur_dev->num_lnodes || -+ (lnode_idx > (cur_dev->num_lnodes - 1))) { -+ MSM_BUS_ERR("%s: Invalid Idx %d, num_lnodes %d", -+ __func__, lnode_idx, cur_dev->num_lnodes); -+ ret = -ENODEV; -+ goto exit_remove_lnode; -+ } -+ -+ cur_dev->lnode_list[lnode_idx].next = -1; -+ cur_dev->lnode_list[lnode_idx].next_dev = NULL; -+ cur_dev->lnode_list[lnode_idx].in_use = 0; -+ } -+ -+exit_remove_lnode: -+ return ret; -+} -+ -+static int prune_path(struct list_head *route_list, int dest, int src, -+ struct list_head *black_list, int found) -+{ -+ struct bus_search_type *search_node, *temp_search_node; -+ struct msm_bus_node_device_type *bus_node; -+ struct list_head *bl_list; -+ struct list_head *temp_bl_list; -+ int search_dev_id = dest; -+ struct device *dest_dev = bus_find_device(&msm_bus_type, NULL, -+ (void *) &dest, -+ msm_bus_device_match_adhoc); -+ int lnode_hop = -1; -+ -+ if (!found) -+ goto reset_links; -+ -+ if (!dest_dev) { -+ MSM_BUS_ERR("%s: Can't find dest dev %d", __func__, dest); -+ goto exit_prune_path; -+ } -+ -+ lnode_hop = gen_lnode(dest_dev, search_dev_id, lnode_hop); -+ -+ list_for_each_entry_reverse(search_node, route_list, link) { -+ list_for_each_entry(bus_node, &search_node->node_list, link) { -+ unsigned int i; -+ for (i = 0; i < bus_node->node_info->num_connections; -+ i++) { -+ if (bus_node->node_info->connections[i] == -+ search_dev_id) { -+ dest_dev = bus_find_device( -+ &msm_bus_type, -+ NULL, -+ (void *) -+ &bus_node->node_info-> -+ id, -+ msm_bus_device_match_adhoc); -+ -+ if (!dest_dev) { -+ lnode_hop = -1; -+ goto reset_links; -+ } -+ -+ lnode_hop = gen_lnode(dest_dev, -+ search_dev_id, -+ lnode_hop); -+ search_dev_id = -+ bus_node->node_info->id; -+ break; -+ } -+ } -+ } -+ } -+reset_links: -+ list_for_each_entry_safe(search_node, temp_search_node, route_list, -+ link) { -+ list_for_each_entry(bus_node, &search_node->node_list, -+ link) -+ bus_node->node_info->is_traversed = false; -+ -+ list_del(&search_node->link); -+ kfree(search_node); -+ } -+ -+ list_for_each_safe(bl_list, temp_bl_list, black_list) -+ list_del(bl_list); -+ -+exit_prune_path: -+ return lnode_hop; -+} -+ -+static void setup_bl_list(struct msm_bus_node_device_type *node, -+ struct list_head *black_list) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < node->node_info->num_blist; i++) { -+ struct msm_bus_node_device_type *bdev; -+ bdev = node->node_info->black_connections[i]->platform_data; -+ list_add_tail(&bdev->link, black_list); -+ } -+} -+ -+static int getpath(int src, int dest) -+{ -+ struct list_head traverse_list; -+ struct list_head edge_list; -+ struct list_head route_list; -+ struct list_head black_list; -+ struct device *src_dev = bus_find_device(&msm_bus_type, NULL, -+ (void *) &src, -+ msm_bus_device_match_adhoc); -+ struct msm_bus_node_device_type *src_node; -+ struct bus_search_type *search_node; -+ int found = 0; -+ int depth_index = 0; -+ int first_hop = -1; -+ -+ INIT_LIST_HEAD(&traverse_list); -+ INIT_LIST_HEAD(&edge_list); -+ INIT_LIST_HEAD(&route_list); -+ INIT_LIST_HEAD(&black_list); -+ -+ if (!src_dev) { -+ MSM_BUS_ERR("%s: Cannot locate src dev %d", __func__, src); -+ goto exit_getpath; -+ } -+ -+ src_node = src_dev->platform_data; -+ if (!src_node) { -+ MSM_BUS_ERR("%s:Fatal, Source dev %d not found", __func__, src); -+ goto exit_getpath; -+ } -+ list_add_tail(&src_node->link, &traverse_list); -+ -+ while ((!found && !list_empty(&traverse_list))) { -+ struct msm_bus_node_device_type *bus_node = NULL; -+ /* Locate dest_id in the traverse list */ -+ list_for_each_entry(bus_node, &traverse_list, link) { -+ if (bus_node->node_info->id == dest) { -+ found = 1; -+ break; -+ } -+ } -+ -+ if (!found) { -+ unsigned int i; -+ /* Setup the new edge list */ -+ list_for_each_entry(bus_node, &traverse_list, link) { -+ /* Setup list of black-listed nodes */ -+ setup_bl_list(bus_node, &black_list); -+ -+ for (i = 0; i < bus_node->node_info-> -+ num_connections; i++) { -+ bool skip; -+ struct msm_bus_node_device_type -+ *node_conn; -+ node_conn = bus_node->node_info-> -+ dev_connections[i]-> -+ platform_data; -+ if (node_conn->node_info-> -+ is_traversed) { -+ MSM_BUS_ERR("Circ Path %d\n", -+ node_conn->node_info->id); -+ goto reset_traversed; -+ } -+ skip = chk_bl_list(&black_list, -+ bus_node->node_info-> -+ connections[i]); -+ if (!skip) { -+ list_add_tail(&node_conn->link, -+ &edge_list); -+ node_conn->node_info-> -+ is_traversed = true; -+ } -+ } -+ } -+ -+ /* Keep tabs of the previous search list */ -+ search_node = kzalloc(sizeof(struct bus_search_type), -+ GFP_KERNEL); -+ INIT_LIST_HEAD(&search_node->node_list); -+ list_splice_init(&traverse_list, -+ &search_node->node_list); -+ /* Add the previous search list to a route list */ -+ list_add_tail(&search_node->link, &route_list); -+ /* Advancing the list depth */ -+ depth_index++; -+ list_splice_init(&edge_list, &traverse_list); -+ } -+ } -+reset_traversed: -+ copy_remaining_nodes(&edge_list, &traverse_list, &route_list); -+ first_hop = prune_path(&route_list, dest, src, &black_list, found); -+ -+exit_getpath: -+ return first_hop; -+} -+ -+static uint64_t arbitrate_bus_req(struct msm_bus_node_device_type *bus_dev, -+ int ctx) -+{ -+ int i; -+ uint64_t max_ib = 0; -+ uint64_t sum_ab = 0; -+ uint64_t bw_max_hz; -+ struct msm_bus_node_device_type *fab_dev = NULL; -+ uint32_t util_fact = 0; -+ uint32_t vrail_comp = 0; -+ -+ /* Find max ib */ -+ for (i = 0; i < bus_dev->num_lnodes; i++) { -+ max_ib = max(max_ib, bus_dev->lnode_list[i].lnode_ib[ctx]); -+ sum_ab += bus_dev->lnode_list[i].lnode_ab[ctx]; -+ } -+ /* -+ * Account for Util factor and vrail comp. The new aggregation -+ * formula is: -+ * Freq_hz = max((sum(ab) * util_fact)/num_chan, max(ib)/vrail_comp) -+ * / bus-width -+ * util_fact and vrail comp are obtained from fabric/Node's dts -+ * properties. -+ * They default to 100 if absent. -+ */ -+ fab_dev = bus_dev->node_info->bus_device->platform_data; -+ /* Don't do this for virtual fabrics */ -+ if (fab_dev && fab_dev->fabdev) { -+ util_fact = bus_dev->node_info->util_fact ? -+ bus_dev->node_info->util_fact : -+ fab_dev->fabdev->util_fact; -+ vrail_comp = bus_dev->node_info->vrail_comp ? -+ bus_dev->node_info->vrail_comp : -+ fab_dev->fabdev->vrail_comp; -+ sum_ab *= util_fact; -+ sum_ab = msm_bus_div64(100, sum_ab); -+ max_ib *= 100; -+ max_ib = msm_bus_div64(vrail_comp, max_ib); -+ } -+ -+ /* Account for multiple channels if any */ -+ if (bus_dev->node_info->num_qports > 1) -+ sum_ab = msm_bus_div64(bus_dev->node_info->num_qports, -+ sum_ab); -+ -+ if (!bus_dev->node_info->buswidth) { -+ MSM_BUS_WARN("No bus width found for %d. Using default\n", -+ bus_dev->node_info->id); -+ bus_dev->node_info->buswidth = 8; -+ } -+ -+ bw_max_hz = max(max_ib, sum_ab); -+ bw_max_hz = msm_bus_div64(bus_dev->node_info->buswidth, -+ bw_max_hz); -+ -+ return bw_max_hz; -+} -+ -+static void del_inp_list(struct list_head *list) -+{ -+ struct rule_update_path_info *rule_node; -+ struct rule_update_path_info *rule_node_tmp; -+ -+ list_for_each_entry_safe(rule_node, rule_node_tmp, list, link) -+ list_del(&rule_node->link); -+} -+ -+static void del_op_list(struct list_head *list) -+{ -+ struct rule_apply_rcm_info *rule; -+ struct rule_apply_rcm_info *rule_tmp; -+ -+ list_for_each_entry_safe(rule, rule_tmp, list, link) -+ list_del(&rule->link); -+} -+ -+static int msm_bus_apply_rules(struct list_head *list, bool after_clk_commit) -+{ -+ struct rule_apply_rcm_info *rule; -+ struct device *dev = NULL; -+ struct msm_bus_node_device_type *dev_info = NULL; -+ int ret = 0; -+ bool throttle_en = false; -+ -+ list_for_each_entry(rule, list, link) { -+ if (!rule) -+ break; -+ -+ if (rule && (rule->after_clk_commit != after_clk_commit)) -+ continue; -+ -+ dev = bus_find_device(&msm_bus_type, NULL, -+ (void *) &rule->id, -+ msm_bus_device_match_adhoc); -+ -+ if (!dev) { -+ MSM_BUS_ERR("Can't find dev node for %d", rule->id); -+ continue; -+ } -+ dev_info = dev->platform_data; -+ -+ throttle_en = ((rule->throttle == THROTTLE_ON) ? true : false); -+ ret = msm_bus_enable_limiter(dev_info, throttle_en, -+ rule->lim_bw); -+ if (ret) -+ MSM_BUS_ERR("Failed to set limiter for %d", rule->id); -+ } -+ -+ return ret; -+} -+ -+static uint64_t get_node_aggab(struct msm_bus_node_device_type *bus_dev) -+{ -+ int i; -+ int ctx; -+ uint64_t max_agg_ab = 0; -+ uint64_t agg_ab = 0; -+ -+ for (ctx = 0; ctx < NUM_CTX; ctx++) { -+ for (i = 0; i < bus_dev->num_lnodes; i++) -+ agg_ab += bus_dev->lnode_list[i].lnode_ab[ctx]; -+ -+ if (bus_dev->node_info->num_qports > 1) -+ agg_ab = msm_bus_div64(bus_dev->node_info->num_qports, -+ agg_ab); -+ -+ max_agg_ab = max(max_agg_ab, agg_ab); -+ } -+ -+ return max_agg_ab; -+} -+ -+static uint64_t get_node_ib(struct msm_bus_node_device_type *bus_dev) -+{ -+ int i; -+ int ctx; -+ uint64_t max_ib = 0; -+ -+ for (ctx = 0; ctx < NUM_CTX; ctx++) { -+ for (i = 0; i < bus_dev->num_lnodes; i++) -+ max_ib = max(max_ib, -+ bus_dev->lnode_list[i].lnode_ib[ctx]); -+ } -+ return max_ib; -+} -+ -+static int update_path(int src, int dest, uint64_t req_ib, uint64_t req_bw, -+ uint64_t cur_ib, uint64_t cur_bw, int src_idx, int ctx) -+{ -+ struct device *src_dev = NULL; -+ struct device *next_dev = NULL; -+ struct link_node *lnode = NULL; -+ struct msm_bus_node_device_type *dev_info = NULL; -+ int curr_idx; -+ int ret = 0; -+ int *dirty_nodes = NULL; -+ int num_dirty = 0; -+ struct rule_update_path_info *rule_node; -+ bool rules_registered = msm_rule_are_rules_registered(); -+ -+ src_dev = bus_find_device(&msm_bus_type, NULL, -+ (void *) &src, -+ msm_bus_device_match_adhoc); -+ -+ if (!src_dev) { -+ MSM_BUS_ERR("%s: Can't find source device %d", __func__, src); -+ ret = -ENODEV; -+ goto exit_update_path; -+ } -+ -+ next_dev = src_dev; -+ -+ if (src_idx < 0) { -+ MSM_BUS_ERR("%s: Invalid lnode idx %d", __func__, src_idx); -+ ret = -ENXIO; -+ goto exit_update_path; -+ } -+ curr_idx = src_idx; -+ -+ INIT_LIST_HEAD(&input_list); -+ INIT_LIST_HEAD(&apply_list); -+ -+ while (next_dev) { -+ dev_info = next_dev->platform_data; -+ -+ if (curr_idx >= dev_info->num_lnodes) { -+ MSM_BUS_ERR("%s: Invalid lnode Idx %d num lnodes %d", -+ __func__, curr_idx, dev_info->num_lnodes); -+ ret = -ENXIO; -+ goto exit_update_path; -+ } -+ -+ lnode = &dev_info->lnode_list[curr_idx]; -+ lnode->lnode_ib[ctx] = req_ib; -+ lnode->lnode_ab[ctx] = req_bw; -+ -+ dev_info->cur_clk_hz[ctx] = arbitrate_bus_req(dev_info, ctx); -+ -+ /* Start updating the clocks at the first hop. -+ * Its ok to figure out the aggregated -+ * request at this node. -+ */ -+ if (src_dev != next_dev) { -+ ret = msm_bus_update_clks(dev_info, ctx, &dirty_nodes, -+ &num_dirty); -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to update clks dev %d", -+ __func__, dev_info->node_info->id); -+ goto exit_update_path; -+ } -+ } -+ -+ ret = msm_bus_update_bw(dev_info, ctx, req_bw, &dirty_nodes, -+ &num_dirty); -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to update bw dev %d", -+ __func__, dev_info->node_info->id); -+ goto exit_update_path; -+ } -+ -+ if (rules_registered) { -+ rule_node = &dev_info->node_info->rule; -+ rule_node->id = dev_info->node_info->id; -+ rule_node->ib = get_node_ib(dev_info); -+ rule_node->ab = get_node_aggab(dev_info); -+ rule_node->clk = max(dev_info->cur_clk_hz[ACTIVE_CTX], -+ dev_info->cur_clk_hz[DUAL_CTX]); -+ list_add_tail(&rule_node->link, &input_list); -+ } -+ -+ next_dev = lnode->next_dev; -+ curr_idx = lnode->next; -+ } -+ -+ if (rules_registered) { -+ msm_rules_update_path(&input_list, &apply_list); -+ msm_bus_apply_rules(&apply_list, false); -+ } -+ -+ msm_bus_commit_data(dirty_nodes, ctx, num_dirty); -+ -+ if (rules_registered) { -+ msm_bus_apply_rules(&apply_list, true); -+ del_inp_list(&input_list); -+ del_op_list(&apply_list); -+ } -+exit_update_path: -+ return ret; -+} -+ -+static int remove_path(int src, int dst, uint64_t cur_ib, uint64_t cur_ab, -+ int src_idx, int active_only) -+{ -+ struct device *src_dev = NULL; -+ struct device *next_dev = NULL; -+ struct link_node *lnode = NULL; -+ struct msm_bus_node_device_type *dev_info = NULL; -+ int ret = 0; -+ int cur_idx = src_idx; -+ int next_idx; -+ -+ /* Update the current path to zero out all request from -+ * this cient on all paths -+ */ -+ -+ ret = update_path(src, dst, 0, 0, cur_ib, cur_ab, src_idx, -+ active_only); -+ if (ret) { -+ MSM_BUS_ERR("%s: Error zeroing out path ctx %d", -+ __func__, ACTIVE_CTX); -+ goto exit_remove_path; -+ } -+ -+ src_dev = bus_find_device(&msm_bus_type, NULL, -+ (void *) &src, -+ msm_bus_device_match_adhoc); -+ if (!src_dev) { -+ MSM_BUS_ERR("%s: Can't find source device %d", __func__, src); -+ ret = -ENODEV; -+ goto exit_remove_path; -+ } -+ -+ next_dev = src_dev; -+ -+ while (next_dev) { -+ dev_info = next_dev->platform_data; -+ lnode = &dev_info->lnode_list[cur_idx]; -+ next_idx = lnode->next; -+ next_dev = lnode->next_dev; -+ remove_lnode(dev_info, cur_idx); -+ cur_idx = next_idx; -+ } -+ -+exit_remove_path: -+ return ret; -+} -+ -+static void getpath_debug(int src, int curr, int active_only) -+{ -+ struct device *dev_node; -+ struct device *dev_it; -+ unsigned int hop = 1; -+ int idx; -+ struct msm_bus_node_device_type *devinfo; -+ int i; -+ -+ dev_node = bus_find_device(&msm_bus_type, NULL, -+ (void *) &src, -+ msm_bus_device_match_adhoc); -+ -+ if (!dev_node) { -+ MSM_BUS_ERR("SRC NOT FOUND %d", src); -+ return; -+ } -+ -+ idx = curr; -+ devinfo = dev_node->platform_data; -+ dev_it = dev_node; -+ -+ MSM_BUS_ERR("Route list Src %d", src); -+ while (dev_it) { -+ struct msm_bus_node_device_type *busdev = -+ devinfo->node_info->bus_device->platform_data; -+ -+ MSM_BUS_ERR("Hop[%d] at Device %d ctx %d", hop, -+ devinfo->node_info->id, active_only); -+ -+ for (i = 0; i < NUM_CTX; i++) { -+ MSM_BUS_ERR("dev info sel ib %llu", -+ devinfo->cur_clk_hz[i]); -+ MSM_BUS_ERR("dev info sel ab %llu", -+ devinfo->node_ab.ab[i]); -+ } -+ -+ dev_it = devinfo->lnode_list[idx].next_dev; -+ idx = devinfo->lnode_list[idx].next; -+ if (dev_it) -+ devinfo = dev_it->platform_data; -+ -+ MSM_BUS_ERR("Bus Device %d", busdev->node_info->id); -+ MSM_BUS_ERR("Bus Clock %llu", busdev->clk[active_only].rate); -+ -+ if (idx < 0) -+ break; -+ hop++; -+ } -+} -+ -+static void unregister_client_adhoc(uint32_t cl) -+{ -+ int i; -+ struct msm_bus_scale_pdata *pdata; -+ int lnode, src, curr, dest; -+ uint64_t cur_clk, cur_bw; -+ struct msm_bus_client *client; -+ -+ mutex_lock(&msm_bus_adhoc_lock); -+ if (!cl) { -+ MSM_BUS_ERR("%s: Null cl handle passed unregister\n", -+ __func__); -+ goto exit_unregister_client; -+ } -+ client = handle_list.cl_list[cl]; -+ pdata = client->pdata; -+ if (!pdata) { -+ MSM_BUS_ERR("%s: Null pdata passed to unregister\n", -+ __func__); -+ goto exit_unregister_client; -+ } -+ -+ curr = client->curr; -+ if (curr >= pdata->num_usecases) { -+ MSM_BUS_ERR("Invalid index Defaulting curr to 0"); -+ curr = 0; -+ } -+ -+ MSM_BUS_DBG("%s: Unregistering client %p", __func__, client); -+ -+ for (i = 0; i < pdata->usecase->num_paths; i++) { -+ src = client->pdata->usecase[curr].vectors[i].src; -+ dest = client->pdata->usecase[curr].vectors[i].dst; -+ -+ lnode = client->src_pnode[i]; -+ cur_clk = client->pdata->usecase[curr].vectors[i].ib; -+ cur_bw = client->pdata->usecase[curr].vectors[i].ab; -+ remove_path(src, dest, cur_clk, cur_bw, lnode, -+ pdata->active_only); -+ } -+ msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_UNREGISTER, cl); -+ kfree(client->src_pnode); -+ kfree(client); -+ handle_list.cl_list[cl] = NULL; -+exit_unregister_client: -+ mutex_unlock(&msm_bus_adhoc_lock); -+ return; -+} -+ -+static int alloc_handle_lst(int size) -+{ -+ int ret = 0; -+ struct msm_bus_client **t_cl_list; -+ -+ if (!handle_list.num_entries) { -+ t_cl_list = kzalloc(sizeof(struct msm_bus_client *) -+ * NUM_CL_HANDLES, GFP_KERNEL); -+ if (ZERO_OR_NULL_PTR(t_cl_list)) { -+ ret = -ENOMEM; -+ MSM_BUS_ERR("%s: Failed to allocate handles list", -+ __func__); -+ goto exit_alloc_handle_lst; -+ } -+ handle_list.cl_list = t_cl_list; -+ handle_list.num_entries += NUM_CL_HANDLES; -+ } else { -+ t_cl_list = krealloc(handle_list.cl_list, -+ sizeof(struct msm_bus_client *) * -+ handle_list.num_entries + NUM_CL_HANDLES, -+ GFP_KERNEL); -+ if (ZERO_OR_NULL_PTR(t_cl_list)) { -+ ret = -ENOMEM; -+ MSM_BUS_ERR("%s: Failed to allocate handles list", -+ __func__); -+ goto exit_alloc_handle_lst; -+ } -+ -+ memset(&handle_list.cl_list[handle_list.num_entries], 0, -+ NUM_CL_HANDLES * sizeof(struct msm_bus_client *)); -+ handle_list.num_entries += NUM_CL_HANDLES; -+ handle_list.cl_list = t_cl_list; -+ } -+exit_alloc_handle_lst: -+ return ret; -+} -+ -+static uint32_t gen_handle(struct msm_bus_client *client) -+{ -+ uint32_t handle = 0; -+ int i; -+ int ret = 0; -+ -+ for (i = 0; i < handle_list.num_entries; i++) { -+ if (i && !handle_list.cl_list[i]) { -+ handle = i; -+ break; -+ } -+ } -+ -+ if (!handle) { -+ ret = alloc_handle_lst(NUM_CL_HANDLES); -+ -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to allocate handle list", -+ __func__); -+ goto exit_gen_handle; -+ } -+ handle = i + 1; -+ } -+ handle_list.cl_list[handle] = client; -+exit_gen_handle: -+ return handle; -+} -+ -+static uint32_t register_client_adhoc(struct msm_bus_scale_pdata *pdata) -+{ -+ int src, dest; -+ int i; -+ struct msm_bus_client *client = NULL; -+ int *lnode; -+ uint32_t handle = 0; -+ -+ mutex_lock(&msm_bus_adhoc_lock); -+ client = kzalloc(sizeof(struct msm_bus_client), GFP_KERNEL); -+ if (!client) { -+ MSM_BUS_ERR("%s: Error allocating client data", __func__); -+ goto exit_register_client; -+ } -+ client->pdata = pdata; -+ -+ lnode = kzalloc(pdata->usecase->num_paths * sizeof(int), GFP_KERNEL); -+ if (ZERO_OR_NULL_PTR(lnode)) { -+ MSM_BUS_ERR("%s: Error allocating pathnode ptr!", __func__); -+ goto exit_register_client; -+ } -+ client->src_pnode = lnode; -+ -+ for (i = 0; i < pdata->usecase->num_paths; i++) { -+ src = pdata->usecase->vectors[i].src; -+ dest = pdata->usecase->vectors[i].dst; -+ -+ if ((src < 0) || (dest < 0)) { -+ MSM_BUS_ERR("%s:Invalid src/dst.src %d dest %d", -+ __func__, src, dest); -+ goto exit_register_client; -+ } -+ -+ lnode[i] = getpath(src, dest); -+ if (lnode[i] < 0) { -+ MSM_BUS_ERR("%s:Failed to find path.src %d dest %d", -+ __func__, src, dest); -+ goto exit_register_client; -+ } -+ } -+ -+ handle = gen_handle(client); -+ msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_REGISTER, -+ handle); -+ MSM_BUS_DBG("%s:Client handle %d %s", __func__, handle, -+ client->pdata->name); -+exit_register_client: -+ mutex_unlock(&msm_bus_adhoc_lock); -+ return handle; -+} -+ -+static int update_request_adhoc(uint32_t cl, unsigned int index) -+{ -+ int i, ret = 0; -+ struct msm_bus_scale_pdata *pdata; -+ int lnode, src, curr, dest; -+ uint64_t req_clk, req_bw, curr_clk, curr_bw; -+ struct msm_bus_client *client; -+ const char *test_cl = "Null"; -+ bool log_transaction = false; -+ -+ mutex_lock(&msm_bus_adhoc_lock); -+ -+ if (!cl) { -+ MSM_BUS_ERR("%s: Invalid client handle %d", __func__, cl); -+ ret = -ENXIO; -+ goto exit_update_request; -+ } -+ -+ client = handle_list.cl_list[cl]; -+ pdata = client->pdata; -+ if (!pdata) { -+ MSM_BUS_ERR("%s: Client data Null.[client didn't register]", -+ __func__); -+ ret = -ENXIO; -+ goto exit_update_request; -+ } -+ -+ if (index >= pdata->num_usecases) { -+ MSM_BUS_ERR("Client %u passed invalid index: %d\n", -+ cl, index); -+ ret = -ENXIO; -+ goto exit_update_request; -+ } -+ -+ if (client->curr == index) { -+ MSM_BUS_DBG("%s: Not updating client request idx %d unchanged", -+ __func__, index); -+ goto exit_update_request; -+ } -+ -+ curr = client->curr; -+ client->curr = index; -+ -+ if (!strcmp(test_cl, pdata->name)) -+ log_transaction = true; -+ -+ MSM_BUS_DBG("%s: cl: %u index: %d curr: %d num_paths: %d\n", __func__, -+ cl, index, client->curr, client->pdata->usecase->num_paths); -+ -+ for (i = 0; i < pdata->usecase->num_paths; i++) { -+ src = client->pdata->usecase[index].vectors[i].src; -+ dest = client->pdata->usecase[index].vectors[i].dst; -+ -+ lnode = client->src_pnode[i]; -+ req_clk = client->pdata->usecase[index].vectors[i].ib; -+ req_bw = client->pdata->usecase[index].vectors[i].ab; -+ if (curr < 0) { -+ curr_clk = 0; -+ curr_bw = 0; -+ } else { -+ curr_clk = client->pdata->usecase[curr].vectors[i].ib; -+ curr_bw = client->pdata->usecase[curr].vectors[i].ab; -+ MSM_BUS_DBG("%s:ab: %llu ib: %llu\n", __func__, -+ curr_bw, curr_clk); -+ } -+ -+ ret = update_path(src, dest, req_clk, req_bw, -+ curr_clk, curr_bw, lnode, pdata->active_only); -+ -+ if (ret) { -+ MSM_BUS_ERR("%s: Update path failed! %d ctx %d\n", -+ __func__, ret, ACTIVE_CTX); -+ goto exit_update_request; -+ } -+ -+ if (log_transaction) -+ getpath_debug(src, lnode, pdata->active_only); -+ } -+ msm_bus_dbg_client_data(client->pdata, index , cl); -+exit_update_request: -+ mutex_unlock(&msm_bus_adhoc_lock); -+ return ret; -+} -+ -+/** -+ * msm_bus_arb_setops_adhoc() : Setup the bus arbitration ops -+ * @ arb_ops: pointer to the arb ops. -+ */ -+void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops) -+{ -+ arb_ops->register_client = register_client_adhoc; -+ arb_ops->update_request = update_request_adhoc; -+ arb_ops->unregister_client = unregister_client_adhoc; -+} ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_bimc.c -@@ -0,0 +1,2112 @@ -+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#define pr_fmt(fmt) "AXI: BIMC: %s(): " fmt, __func__ -+ -+#include -+#include -+#include "msm-bus-board.h" -+#include "msm_bus_core.h" -+#include "msm_bus_bimc.h" -+#include "msm_bus_adhoc.h" -+#include -+ -+enum msm_bus_bimc_slave_block { -+ SLAVE_BLOCK_RESERVED = 0, -+ SLAVE_BLOCK_SLAVE_WAY, -+ SLAVE_BLOCK_XPU, -+ SLAVE_BLOCK_ARBITER, -+ SLAVE_BLOCK_SCMO, -+}; -+ -+enum bke_sw { -+ BKE_OFF = 0, -+ BKE_ON = 1, -+}; -+ -+/* M_Generic */ -+ -+#define M_REG_BASE(b) ((b) + 0x00008000) -+ -+#define M_COMPONENT_INFO_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000000) -+enum bimc_m_component_info { -+ M_COMPONENT_INFO_RMSK = 0xffffff, -+ M_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000, -+ M_COMPONENT_INFO_INSTANCE_SHFT = 0x10, -+ M_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00, -+ M_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8, -+ M_COMPONENT_INFO_TYPE_BMSK = 0xff, -+ M_COMPONENT_INFO_TYPE_SHFT = 0x0, -+}; -+ -+#define M_CONFIG_INFO_0_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000020) -+enum bimc_m_config_info_0 { -+ M_CONFIG_INFO_0_RMSK = 0xff00ffff, -+ M_CONFIG_INFO_0_SYNC_MODE_BMSK = 0xff000000, -+ M_CONFIG_INFO_0_SYNC_MODE_SHFT = 0x18, -+ M_CONFIG_INFO_0_CONNECTION_TYPE_BMSK = 0xff00, -+ M_CONFIG_INFO_0_CONNECTION_TYPE_SHFT = 0x8, -+ M_CONFIG_INFO_0_FUNC_BMSK = 0xff, -+ M_CONFIG_INFO_0_FUNC_SHFT = 0x0, -+}; -+ -+#define M_CONFIG_INFO_1_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000030) -+enum bimc_m_config_info_1 { -+ M_CONFIG_INFO_1_RMSK = 0xffffffff, -+ M_CONFIG_INFO_1_SWAY_CONNECTIVITY_BMSK = 0xffffffff, -+ M_CONFIG_INFO_1_SWAY_CONNECTIVITY_SHFT = 0x0, -+}; -+ -+#define M_CONFIG_INFO_2_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000040) -+enum bimc_m_config_info_2 { -+ M_CONFIG_INFO_2_RMSK = 0xffffffff, -+ M_CONFIG_INFO_2_M_DATA_WIDTH_BMSK = 0xffff0000, -+ M_CONFIG_INFO_2_M_DATA_WIDTH_SHFT = 0x10, -+ M_CONFIG_INFO_2_M_TID_WIDTH_BMSK = 0xff00, -+ M_CONFIG_INFO_2_M_TID_WIDTH_SHFT = 0x8, -+ M_CONFIG_INFO_2_M_MID_WIDTH_BMSK = 0xff, -+ M_CONFIG_INFO_2_M_MID_WIDTH_SHFT = 0x0, -+}; -+ -+#define M_CONFIG_INFO_3_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000050) -+enum bimc_m_config_info_3 { -+ M_CONFIG_INFO_3_RMSK = 0xffffffff, -+ M_CONFIG_INFO_3_RCH_DEPTH_BMSK = 0xff000000, -+ M_CONFIG_INFO_3_RCH_DEPTH_SHFT = 0x18, -+ M_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff0000, -+ M_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x10, -+ M_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff00, -+ M_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x8, -+ M_CONFIG_INFO_3_ACH_DEPTH_BMSK = 0xff, -+ M_CONFIG_INFO_3_ACH_DEPTH_SHFT = 0x0, -+}; -+ -+#define M_CONFIG_INFO_4_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000060) -+enum bimc_m_config_info_4 { -+ M_CONFIG_INFO_4_RMSK = 0xffff, -+ M_CONFIG_INFO_4_REORDER_BUF_DEPTH_BMSK = 0xff00, -+ M_CONFIG_INFO_4_REORDER_BUF_DEPTH_SHFT = 0x8, -+ M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_BMSK = 0xff, -+ M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_SHFT = 0x0, -+}; -+ -+#define M_CONFIG_INFO_5_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000070) -+enum bimc_m_config_info_5 { -+ M_CONFIG_INFO_5_RMSK = 0x111, -+ M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_BMSK = 0x100, -+ M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_SHFT = 0x8, -+ M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_BMSK = 0x10, -+ M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_SHFT = 0x4, -+ M_CONFIG_INFO_5_M2MP_PIPELINE_EN_BMSK = 0x1, -+ M_CONFIG_INFO_5_M2MP_PIPELINE_EN_SHFT = 0x0, -+}; -+ -+#define M_INT_STATUS_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000100) -+enum bimc_m_int_status { -+ M_INT_STATUS_RMSK = 0x3, -+}; -+ -+#define M_INT_CLR_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000108) -+enum bimc_m_int_clr { -+ M_INT_CLR_RMSK = 0x3, -+}; -+ -+#define M_INT_EN_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x0000010c) -+enum bimc_m_int_en { -+ M_INT_EN_RMSK = 0x3, -+}; -+ -+#define M_CLK_CTRL_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000200) -+enum bimc_m_clk_ctrl { -+ M_CLK_CTRL_RMSK = 0x3, -+ M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK = 0x2, -+ M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT = 0x1, -+ M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1, -+ M_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0, -+}; -+ -+#define M_MODE_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000210) -+enum bimc_m_mode { -+ M_MODE_RMSK = 0xf0000011, -+ M_MODE_WR_GATHER_BEATS_BMSK = 0xf0000000, -+ M_MODE_WR_GATHER_BEATS_SHFT = 0x1c, -+ M_MODE_NARROW_WR_BMSK = 0x10, -+ M_MODE_NARROW_WR_SHFT = 0x4, -+ M_MODE_ORDERING_MODEL_BMSK = 0x1, -+ M_MODE_ORDERING_MODEL_SHFT = 0x0, -+}; -+ -+#define M_PRIOLVL_OVERRIDE_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000230) -+enum bimc_m_priolvl_override { -+ M_PRIOLVL_OVERRIDE_RMSK = 0x301, -+ M_PRIOLVL_OVERRIDE_BMSK = 0x300, -+ M_PRIOLVL_OVERRIDE_SHFT = 0x8, -+ M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK = 0x1, -+ M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT = 0x0, -+}; -+ -+#define M_RD_CMD_OVERRIDE_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000240) -+enum bimc_m_read_command_override { -+ M_RD_CMD_OVERRIDE_RMSK = 0x3071f7f, -+ M_RD_CMD_OVERRIDE_AREQPRIO_BMSK = 0x3000000, -+ M_RD_CMD_OVERRIDE_AREQPRIO_SHFT = 0x18, -+ M_RD_CMD_OVERRIDE_AMEMTYPE_BMSK = 0x70000, -+ M_RD_CMD_OVERRIDE_AMEMTYPE_SHFT = 0x10, -+ M_RD_CMD_OVERRIDE_ATRANSIENT_BMSK = 0x1000, -+ M_RD_CMD_OVERRIDE_ATRANSIENT_SHFT = 0xc, -+ M_RD_CMD_OVERRIDE_ASHARED_BMSK = 0x800, -+ M_RD_CMD_OVERRIDE_ASHARED_SHFT = 0xb, -+ M_RD_CMD_OVERRIDE_AREDIRECT_BMSK = 0x400, -+ M_RD_CMD_OVERRIDE_AREDIRECT_SHFT = 0xa, -+ M_RD_CMD_OVERRIDE_AOOO_BMSK = 0x200, -+ M_RD_CMD_OVERRIDE_AOOO_SHFT = 0x9, -+ M_RD_CMD_OVERRIDE_AINNERSHARED_BMSK = 0x100, -+ M_RD_CMD_OVERRIDE_AINNERSHARED_SHFT = 0x8, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK = 0x40, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT = 0x6, -+ M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK = 0x20, -+ M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT = 0x5, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK = 0x10, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT = 0x4, -+ M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK = 0x8, -+ M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT = 0x3, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK = 0x4, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT = 0x2, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK = 0x2, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT = 0x1, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK = 0x1, -+ M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT = 0x0, -+}; -+ -+#define M_WR_CMD_OVERRIDE_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000250) -+enum bimc_m_write_command_override { -+ M_WR_CMD_OVERRIDE_RMSK = 0x3071f7f, -+ M_WR_CMD_OVERRIDE_AREQPRIO_BMSK = 0x3000000, -+ M_WR_CMD_OVERRIDE_AREQPRIO_SHFT = 0x18, -+ M_WR_CMD_OVERRIDE_AMEMTYPE_BMSK = 0x70000, -+ M_WR_CMD_OVERRIDE_AMEMTYPE_SHFT = 0x10, -+ M_WR_CMD_OVERRIDE_ATRANSIENT_BMSK = 0x1000, -+ M_WR_CMD_OVERRIDE_ATRANSIENT_SHFT = 0xc, -+ M_WR_CMD_OVERRIDE_ASHARED_BMSK = 0x800, -+ M_WR_CMD_OVERRIDE_ASHARED_SHFT = 0xb, -+ M_WR_CMD_OVERRIDE_AREDIRECT_BMSK = 0x400, -+ M_WR_CMD_OVERRIDE_AREDIRECT_SHFT = 0xa, -+ M_WR_CMD_OVERRIDE_AOOO_BMSK = 0x200, -+ M_WR_CMD_OVERRIDE_AOOO_SHFT = 0x9, -+ M_WR_CMD_OVERRIDE_AINNERSHARED_BMSK = 0x100, -+ M_WR_CMD_OVERRIDE_AINNERSHARED_SHFT = 0x8, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK = 0x40, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT = 0x6, -+ M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK = 0x20, -+ M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT = 0x5, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK = 0x10, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT = 0x4, -+ M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK = 0x8, -+ M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT = 0x3, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK = 0x4, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT = 0x2, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK = 0x2, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT = 0x1, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK = 0x1, -+ M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT = 0x0, -+}; -+ -+#define M_BKE_EN_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000300) -+enum bimc_m_bke_en { -+ M_BKE_EN_RMSK = 0x1, -+ M_BKE_EN_EN_BMSK = 0x1, -+ M_BKE_EN_EN_SHFT = 0x0, -+}; -+ -+/* Grant Period registers */ -+#define M_BKE_GP_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000304) -+enum bimc_m_bke_grant_period { -+ M_BKE_GP_RMSK = 0x3ff, -+ M_BKE_GP_GP_BMSK = 0x3ff, -+ M_BKE_GP_GP_SHFT = 0x0, -+}; -+ -+/* Grant count register. -+ * The Grant count register represents a signed 16 bit -+ * value, range 0-0x7fff -+ */ -+#define M_BKE_GC_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000308) -+enum bimc_m_bke_grant_count { -+ M_BKE_GC_RMSK = 0xffff, -+ M_BKE_GC_GC_BMSK = 0xffff, -+ M_BKE_GC_GC_SHFT = 0x0, -+}; -+ -+/* Threshold High Registers */ -+#define M_BKE_THH_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000320) -+enum bimc_m_bke_thresh_high { -+ M_BKE_THH_RMSK = 0xffff, -+ M_BKE_THH_THRESH_BMSK = 0xffff, -+ M_BKE_THH_THRESH_SHFT = 0x0, -+}; -+ -+/* Threshold Medium Registers */ -+#define M_BKE_THM_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000324) -+enum bimc_m_bke_thresh_medium { -+ M_BKE_THM_RMSK = 0xffff, -+ M_BKE_THM_THRESH_BMSK = 0xffff, -+ M_BKE_THM_THRESH_SHFT = 0x0, -+}; -+ -+/* Threshold Low Registers */ -+#define M_BKE_THL_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000328) -+enum bimc_m_bke_thresh_low { -+ M_BKE_THL_RMSK = 0xffff, -+ M_BKE_THL_THRESH_BMSK = 0xffff, -+ M_BKE_THL_THRESH_SHFT = 0x0, -+}; -+ -+#define M_BKE_HEALTH_0_CONFIG_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000340) -+enum bimc_m_bke_health_0 { -+ M_BKE_HEALTH_0_CONFIG_RMSK = 0x80000303, -+ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK = 0x80000000, -+ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT = 0x1f, -+ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK = 0x300, -+ M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT = 0x8, -+ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK = 0x3, -+ M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT = 0x0, -+}; -+ -+#define M_BKE_HEALTH_1_CONFIG_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000344) -+enum bimc_m_bke_health_1 { -+ M_BKE_HEALTH_1_CONFIG_RMSK = 0x80000303, -+ M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_BMSK = 0x80000000, -+ M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_SHFT = 0x1f, -+ M_BKE_HEALTH_1_CONFIG_AREQPRIO_BMSK = 0x300, -+ M_BKE_HEALTH_1_CONFIG_AREQPRIO_SHFT = 0x8, -+ M_BKE_HEALTH_1_CONFIG_PRIOLVL_BMSK = 0x3, -+ M_BKE_HEALTH_1_CONFIG_PRIOLVL_SHFT = 0x0, -+}; -+ -+#define M_BKE_HEALTH_2_CONFIG_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000348) -+enum bimc_m_bke_health_2 { -+ M_BKE_HEALTH_2_CONFIG_RMSK = 0x80000303, -+ M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_BMSK = 0x80000000, -+ M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_SHFT = 0x1f, -+ M_BKE_HEALTH_2_CONFIG_AREQPRIO_BMSK = 0x300, -+ M_BKE_HEALTH_2_CONFIG_AREQPRIO_SHFT = 0x8, -+ M_BKE_HEALTH_2_CONFIG_PRIOLVL_BMSK = 0x3, -+ M_BKE_HEALTH_2_CONFIG_PRIOLVL_SHFT = 0x0, -+}; -+ -+#define M_BKE_HEALTH_3_CONFIG_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x0000034c) -+enum bimc_m_bke_health_3 { -+ M_BKE_HEALTH_3_CONFIG_RMSK = 0x303, -+ M_BKE_HEALTH_3_CONFIG_AREQPRIO_BMSK = 0x300, -+ M_BKE_HEALTH_3_CONFIG_AREQPRIO_SHFT = 0x8, -+ M_BKE_HEALTH_3_CONFIG_PRIOLVL_BMSK = 0x3, -+ M_BKE_HEALTH_3_CONFIG_PRIOLVL_SHFT = 0x0, -+}; -+ -+#define M_BUF_STATUS_ADDR(b, n) \ -+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000400) -+enum bimc_m_buf_status { -+ M_BUF_STATUS_RMSK = 0xf03f030, -+ M_BUF_STATUS_RCH_DATA_WR_FULL_BMSK = 0x8000000, -+ M_BUF_STATUS_RCH_DATA_WR_FULL_SHFT = 0x1b, -+ M_BUF_STATUS_RCH_DATA_WR_EMPTY_BMSK = 0x4000000, -+ M_BUF_STATUS_RCH_DATA_WR_EMPTY_SHFT = 0x1a, -+ M_BUF_STATUS_RCH_CTRL_WR_FULL_BMSK = 0x2000000, -+ M_BUF_STATUS_RCH_CTRL_WR_FULL_SHFT = 0x19, -+ M_BUF_STATUS_RCH_CTRL_WR_EMPTY_BMSK = 0x1000000, -+ M_BUF_STATUS_RCH_CTRL_WR_EMPTY_SHFT = 0x18, -+ M_BUF_STATUS_BCH_WR_FULL_BMSK = 0x20000, -+ M_BUF_STATUS_BCH_WR_FULL_SHFT = 0x11, -+ M_BUF_STATUS_BCH_WR_EMPTY_BMSK = 0x10000, -+ M_BUF_STATUS_BCH_WR_EMPTY_SHFT = 0x10, -+ M_BUF_STATUS_WCH_DATA_RD_FULL_BMSK = 0x8000, -+ M_BUF_STATUS_WCH_DATA_RD_FULL_SHFT = 0xf, -+ M_BUF_STATUS_WCH_DATA_RD_EMPTY_BMSK = 0x4000, -+ M_BUF_STATUS_WCH_DATA_RD_EMPTY_SHFT = 0xe, -+ M_BUF_STATUS_WCH_CTRL_RD_FULL_BMSK = 0x2000, -+ M_BUF_STATUS_WCH_CTRL_RD_FULL_SHFT = 0xd, -+ M_BUF_STATUS_WCH_CTRL_RD_EMPTY_BMSK = 0x1000, -+ M_BUF_STATUS_WCH_CTRL_RD_EMPTY_SHFT = 0xc, -+ M_BUF_STATUS_ACH_RD_FULL_BMSK = 0x20, -+ M_BUF_STATUS_ACH_RD_FULL_SHFT = 0x5, -+ M_BUF_STATUS_ACH_RD_EMPTY_BMSK = 0x10, -+ M_BUF_STATUS_ACH_RD_EMPTY_SHFT = 0x4, -+}; -+/*BIMC Generic */ -+ -+#define S_REG_BASE(b) ((b) + 0x00048000) -+ -+#define S_COMPONENT_INFO_ADDR(b, n) \ -+ (S_REG_BASE(b) + (0x8000 * (n)) + 0x00000000) -+enum bimc_s_component_info { -+ S_COMPONENT_INFO_RMSK = 0xffffff, -+ S_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000, -+ S_COMPONENT_INFO_INSTANCE_SHFT = 0x10, -+ S_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00, -+ S_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8, -+ S_COMPONENT_INFO_TYPE_BMSK = 0xff, -+ S_COMPONENT_INFO_TYPE_SHFT = 0x0, -+}; -+ -+#define S_HW_INFO_ADDR(b, n) \ -+ (S_REG_BASE(b) + (0x80000 * (n)) + 0x00000010) -+enum bimc_s_hw_info { -+ S_HW_INFO_RMSK = 0xffffffff, -+ S_HW_INFO_MAJOR_BMSK = 0xff000000, -+ S_HW_INFO_MAJOR_SHFT = 0x18, -+ S_HW_INFO_BRANCH_BMSK = 0xff0000, -+ S_HW_INFO_BRANCH_SHFT = 0x10, -+ S_HW_INFO_MINOR_BMSK = 0xff00, -+ S_HW_INFO_MINOR_SHFT = 0x8, -+ S_HW_INFO_ECO_BMSK = 0xff, -+ S_HW_INFO_ECO_SHFT = 0x0, -+}; -+ -+ -+/* S_SCMO_GENERIC */ -+ -+#define S_SCMO_REG_BASE(b) ((b) + 0x00048000) -+ -+#define S_SCMO_CONFIG_INFO_0_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000020) -+enum bimc_s_scmo_config_info_0 { -+ S_SCMO_CONFIG_INFO_0_RMSK = 0xffffffff, -+ S_SCMO_CONFIG_INFO_0_DATA_WIDTH_BMSK = 0xffff0000, -+ S_SCMO_CONFIG_INFO_0_DATA_WIDTH_SHFT = 0x10, -+ S_SCMO_CONFIG_INFO_0_TID_WIDTH_BMSK = 0xff00, -+ S_SCMO_CONFIG_INFO_0_TID_WIDTH_SHFT = 0x8, -+ S_SCMO_CONFIG_INFO_0_MID_WIDTH_BMSK = 0xff, -+ S_SCMO_CONFIG_INFO_0_MID_WIDTH_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CONFIG_INFO_1_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000030) -+enum bimc_s_scmo_config_info_1 { -+ S_SCMO_CONFIG_INFO_1_RMSK = 0xffffffff, -+ S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff, -+ S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CONFIG_INFO_2_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000040) -+enum bimc_s_scmo_config_info_2 { -+ S_SCMO_CONFIG_INFO_2_RMSK = 0xff00ff, -+ S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_BMSK = 0xff0000, -+ S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_SHFT = 0x10, -+ S_SCMO_CONFIG_INFO_2_VMID_WIDTH_BMSK = 0xff, -+ S_SCMO_CONFIG_INFO_2_VMID_WIDTH_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CONFIG_INFO_3_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000050) -+enum bimc_s_scmo_config_info_3 { -+ S_SCMO_CONFIG_INFO_3_RMSK = 0xffffffff, -+ S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_BMSK = 0xff000000, -+ S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_SHFT = 0x18, -+ S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_BMSK = 0xff0000, -+ S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_SHFT = 0x10, -+ S_SCMO_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff00, -+ S_SCMO_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x8, -+ S_SCMO_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff, -+ S_SCMO_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CONFIG_INFO_4_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000060) -+enum bimc_s_scmo_config_info_4 { -+ S_SCMO_CONFIG_INFO_4_RMSK = 0xffff, -+ S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_BMSK = 0xff00, -+ S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_SHFT = 0x8, -+ S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_BMSK = 0xff, -+ S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CONFIG_INFO_5_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000070) -+enum bimc_s_scmo_config_info_5 { -+ S_SCMO_CONFIG_INFO_5_RMSK = 0xffff, -+ S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_BMSK = 0xff00, -+ S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_SHFT = 0x8, -+ S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_BMSK = 0xff, -+ S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CONFIG_INFO_6_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000080) -+enum bimc_s_scmo_config_info_6 { -+ S_SCMO_CONFIG_INFO_6_RMSK = 0x1111, -+ S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_BMSK = 0x1000, -+ S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_SHFT = 0xc, -+ S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_BMSK = 0x100, -+ S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_SHFT = 0x8, -+ S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_BMSK = 0x10, -+ S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_SHFT = 0x4, -+ S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_BMSK = 0x1, -+ S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_SHFT = 0x0, -+}; -+ -+#define S_SCMO_INT_STATUS_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000100) -+enum bimc_s_scmo_int_status { -+ S_SCMO_INT_STATUS_RMSK = 0x1, -+ S_SCMO_INT_STATUS_ERR_OCCURED_BMSK = 0x1, -+ S_SCMO_INT_STATUS_ERR_OCCURED_SHFT = 0x0, -+}; -+ -+#define S_SCMO_INT_CLR_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000108) -+enum bimc_s_scmo_int_clr { -+ S_SCMO_INT_CLR_RMSK = 0x1, -+ S_SCMO_INT_CLR_IRQ_CLR_BMSK = 0x1, -+ S_SCMO_INT_CLR_IRQ_CLR_SHFT = 0x0, -+}; -+ -+#define S_SCMO_INT_EN_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c) -+enum bimc_s_scmo_int_en { -+ S_SCMO_INT_EN_RMSK = 0x1, -+ S_SCMO_INT_EN_IRQ_EN_BMSK = 0x1, -+ S_SCMO_INT_EN_IRQ_EN_SHFT = 0x0, -+}; -+ -+#define S_SCMO_ESYN_ADDR_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000120) -+enum bimc_s_scmo_esyn_addr { -+ S_SCMO_ESYN_ADDR_RMSK = 0xffffffff, -+ S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_BMSK = 0xffffffff, -+ S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_SHFT = 0x0, -+}; -+ -+#define S_SCMO_ESYN_APACKET_0_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000128) -+enum bimc_s_scmo_esyn_apacket_0 { -+ S_SCMO_ESYN_APACKET_0_RMSK = 0xff1fffff, -+ S_SCMO_ESYN_APACKET_0_ERR_ATID_BMSK = 0xff000000, -+ S_SCMO_ESYN_APACKET_0_ERR_ATID_SHFT = 0x18, -+ S_SCMO_ESYN_APACKET_0_ERR_AVMID_BMSK = 0x1f0000, -+ S_SCMO_ESYN_APACKET_0_ERR_AVMID_SHFT = 0x10, -+ S_SCMO_ESYN_APACKET_0_ERR_AMID_BMSK = 0xffff, -+ S_SCMO_ESYN_APACKET_0_ERR_AMID_SHFT = 0x0, -+}; -+ -+#define S_SCMO_ESYN_APACKET_1_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000012c) -+enum bimc_s_scmo_esyn_apacket_1 { -+ S_SCMO_ESYN_APACKET_1_RMSK = 0x10ff117, -+ S_SCMO_ESYN_APACKET_1_ERR_CODE_BMSK = 0x1000000, -+ S_SCMO_ESYN_APACKET_1_ERR_CODE_SHFT = 0x18, -+ S_SCMO_ESYN_APACKET_1_ERR_ALEN_BMSK = 0xf0000, -+ S_SCMO_ESYN_APACKET_1_ERR_ALEN_SHFT = 0x10, -+ S_SCMO_ESYN_APACKET_1_ERR_ASIZE_BMSK = 0xe000, -+ S_SCMO_ESYN_APACKET_1_ERR_ASIZE_SHFT = 0xd, -+ S_SCMO_ESYN_APACKET_1_ERR_ABURST_BMSK = 0x1000, -+ S_SCMO_ESYN_APACKET_1_ERR_ABURST_SHFT = 0xc, -+ S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_BMSK = 0x100, -+ S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_SHFT = 0x8, -+ S_SCMO_ESYN_APACKET_1_ERR_APRONTS_BMSK = 0x10, -+ S_SCMO_ESYN_APACKET_1_ERR_APRONTS_SHFT = 0x4, -+ S_SCMO_ESYN_APACKET_1_ERR_AOOORD_BMSK = 0x4, -+ S_SCMO_ESYN_APACKET_1_ERR_AOOORD_SHFT = 0x2, -+ S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_BMSK = 0x2, -+ S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_SHFT = 0x1, -+ S_SCMO_ESYN_APACKET_1_ERR_AWRITE_BMSK = 0x1, -+ S_SCMO_ESYN_APACKET_1_ERR_AWRITE_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CLK_CTRL_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000200) -+enum bimc_s_scmo_clk_ctrl { -+ S_SCMO_CLK_CTRL_RMSK = 0xffff1111, -+ S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_BMSK = 0x10000, -+ S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_SHFT = 0x10, -+ S_SCMO_CLK_CTRL_RCH_CG_EN_BMSK = 0x1000, -+ S_SCMO_CLK_CTRL_RCH_CG_EN_SHFT = 0xc, -+ S_SCMO_CLK_CTRL_FLUSH_CG_EN_BMSK = 0x100, -+ S_SCMO_CLK_CTRL_FLUSH_CG_EN_SHFT = 0x8, -+ S_SCMO_CLK_CTRL_WCH_CG_EN_BMSK = 0x10, -+ S_SCMO_CLK_CTRL_WCH_CG_EN_SHFT = 0x4, -+ S_SCMO_CLK_CTRL_ACH_CG_EN_BMSK = 0x1, -+ S_SCMO_CLK_CTRL_ACH_CG_EN_SHFT = 0x0, -+}; -+ -+#define S_SCMO_SLV_INTERLEAVE_CFG_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000400) -+enum bimc_s_scmo_slv_interleave_cfg { -+ S_SCMO_SLV_INTERLEAVE_CFG_RMSK = 0xff, -+ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_BMSK = 0x10, -+ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_SHFT = 0x4, -+ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_BMSK = 0x1, -+ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_SHFT = 0x0, -+}; -+ -+#define S_SCMO_ADDR_BASE_CSn_ADDR(b, n, o) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000410 + 0x4 * (o)) -+enum bimc_s_scmo_addr_base_csn { -+ S_SCMO_ADDR_BASE_CSn_RMSK = 0xffff, -+ S_SCMO_ADDR_BASE_CSn_MAXn = 1, -+ S_SCMO_ADDR_BASE_CSn_ADDR_BASE_BMSK = 0xfc, -+ S_SCMO_ADDR_BASE_CSn_ADDR_BASE_SHFT = 0x2, -+}; -+ -+#define S_SCMO_ADDR_MAP_CSn_ADDR(b, n, o) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000420 + 0x4 * (o)) -+enum bimc_s_scmo_addr_map_csn { -+ S_SCMO_ADDR_MAP_CSn_RMSK = 0xffff, -+ S_SCMO_ADDR_MAP_CSn_MAXn = 1, -+ S_SCMO_ADDR_MAP_CSn_RANK_EN_BMSK = 0x8000, -+ S_SCMO_ADDR_MAP_CSn_RANK_EN_SHFT = 0xf, -+ S_SCMO_ADDR_MAP_CSn_ADDR_MODE_BMSK = 0x1000, -+ S_SCMO_ADDR_MAP_CSn_ADDR_MODE_SHFT = 0xc, -+ S_SCMO_ADDR_MAP_CSn_BANK_SIZE_BMSK = 0x100, -+ S_SCMO_ADDR_MAP_CSn_BANK_SIZE_SHFT = 0x8, -+ S_SCMO_ADDR_MAP_CSn_ROW_SIZE_BMSK = 0x30, -+ S_SCMO_ADDR_MAP_CSn_ROW_SIZE_SHFT = 0x4, -+ S_SCMO_ADDR_MAP_CSn_COL_SIZE_BMSK = 0x3, -+ S_SCMO_ADDR_MAP_CSn_COL_SIZE_SHFT = 0x0, -+}; -+ -+#define S_SCMO_ADDR_MASK_CSn_ADDR(b, n, o) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000430 + 0x4 * (0)) -+enum bimc_s_scmo_addr_mask_csn { -+ S_SCMO_ADDR_MASK_CSn_RMSK = 0xffff, -+ S_SCMO_ADDR_MASK_CSn_MAXn = 1, -+ S_SCMO_ADDR_MASK_CSn_ADDR_MASK_BMSK = 0xfc, -+ S_SCMO_ADDR_MASK_CSn_ADDR_MASK_SHFT = 0x2, -+}; -+ -+#define S_SCMO_SLV_STATUS_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000450) -+enum bimc_s_scmo_slv_status { -+ S_SCMO_SLV_STATUS_RMSK = 0xff3, -+ S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_BMSK = 0xff0, -+ S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_SHFT = 0x4, -+ S_SCMO_SLV_STATUS_SLAVE_IDLE_BMSK = 0x3, -+ S_SCMO_SLV_STATUS_SLAVE_IDLE_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CMD_BUF_CFG_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000500) -+enum bimc_s_scmo_cmd_buf_cfg { -+ S_SCMO_CMD_BUF_CFG_RMSK = 0xf1f, -+ S_SCMO_CMD_BUF_CFG_CMD_ORDERING_BMSK = 0x300, -+ S_SCMO_CMD_BUF_CFG_CMD_ORDERING_SHFT = 0x8, -+ S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_BMSK = 0x10, -+ S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_SHFT = 0x4, -+ S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_BMSK = 0x7, -+ S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_SHFT = 0x0, -+}; -+ -+#define S_SCM_CMD_BUF_STATUS_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000520) -+enum bimc_s_scm_cmd_buf_status { -+ S_SCMO_CMD_BUF_STATUS_RMSK = 0x77, -+ S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_BMSK = 0x70, -+ S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_SHFT = 0x4, -+ S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_BMSK = 0x7, -+ S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_SHFT = 0x0, -+}; -+ -+#define S_SCMO_RCH_SEL_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000540) -+enum bimc_s_scmo_rch_sel { -+ S_SCMO_RCH_SEL_RMSK = 0xffffffff, -+ S_SCMO_CMD_BUF_STATUS_RCH_PORTS_BMSK = 0xffffffff, -+ S_SCMO_CMD_BUF_STATUS_RCH_PORTS_SHFT = 0x0, -+}; -+ -+#define S_SCMO_RCH_BKPR_CFG_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000544) -+enum bimc_s_scmo_rch_bkpr_cfg { -+ S_SCMO_RCH_BKPR_CFG_RMSK = 0xffffffff, -+ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_BMSK = 0x3f000000, -+ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_SHFT = 0x18, -+ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_BMSK = 0x3f0000, -+ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_SHFT = 0x10, -+ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_BMSK = 0x3f00, -+ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_SHFT = 0x8, -+ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_BMSK = 0x3f, -+ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_SHFT = 0x0, -+}; -+ -+#define S_SCMO_RCH_STATUS_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000560) -+enum bimc_s_scmo_rch_status { -+ S_SCMO_RCH_STATUS_RMSK = 0x33333, -+ S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_BMSK = 0x20000, -+ S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_SHFT = 0x11, -+ S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_BMSK = 0x10000, -+ S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_SHFT = 0x10, -+ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_BMSK = 0x2000, -+ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_SHFT = 0xd, -+ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_BMSK = 0x1000, -+ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_SHFT = 0xc, -+ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_BMSK = 0x200, -+ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_SHFT = 0x9, -+ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_BMSK = 0x100, -+ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_SHFT = 0x8, -+ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_BMSK = 0x20, -+ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_SHFT = 0x5, -+ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_BMSK = 0x10, -+ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_SHFT = 0x4, -+ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_BMSK = 0x2, -+ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_SHFT = 0x1, -+ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_BMSK = 0x1, -+ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_SHFT = 0x0, -+}; -+ -+#define S_SCMO_WCH_BUF_CFG_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000580) -+enum bimc_s_scmo_wch_buf_cfg { -+ S_SCMO_WCH_BUF_CFG_RMSK = 0xff, -+ S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_BMSK = 0x10, -+ S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_SHFT = 0x4, -+ S_SCMO_WCH_BUF_CFG_COALESCE_EN_BMSK = 0x1, -+ S_SCMO_WCH_BUF_CFG_COALESCE_EN_SHFT = 0x0, -+}; -+ -+#define S_SCMO_WCH_STATUS_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005a0) -+enum bimc_s_scmo_wch_status { -+ S_SCMO_WCH_STATUS_RMSK = 0x333, -+ S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_BMSK = 0x200, -+ S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_SHFT = 0x9, -+ S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_BMSK = 0x100, -+ S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_SHFT = 0x8, -+ S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_BMSK = 0x20, -+ S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_SHFT = 0x5, -+ S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_BMSK = 0x10, -+ S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_SHFT = 0x4, -+ S_SCMO_WCH_STATUS_WBUF_FULL_BMSK = 0x2, -+ S_SCMO_WCH_STATUS_WBUF_FULL_SHFT = 0x1, -+ S_SCMO_WCH_STATUS_WBUF_EMPTY_BMSK = 0x1, -+ S_SCMO_WCH_STATUS_WBUF_EMPTY_SHFT = 0x0, -+}; -+ -+#define S_SCMO_FLUSH_CFG_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c0) -+enum bimc_s_scmo_flush_cfg { -+ S_SCMO_FLUSH_CFG_RMSK = 0xffffffff, -+ S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_BMSK = 0x10000000, -+ S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_SHFT = 0x1c, -+ S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_BMSK = 0x3ff0000, -+ S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_SHFT = 0x10, -+ S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_BMSK = 0xf00, -+ S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_SHFT = 0x8, -+ S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_BMSK = 0xf, -+ S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_SHFT = 0x0, -+}; -+ -+#define S_SCMO_FLUSH_CMD_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c4) -+enum bimc_s_scmo_flush_cmd { -+ S_SCMO_FLUSH_CMD_RMSK = 0xf, -+ S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_BMSK = 0x3, -+ S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CMD_OPT_CFG0_ADDR(b, n) \ -+ (S_SCM0_REG_BASE(b) + (0x8000 * (n)) + 0x00000700) -+enum bimc_s_scmo_cmd_opt_cfg0 { -+ S_SCMO_CMD_OPT_CFG0_RMSK = 0xffffff, -+ S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_BMSK = 0x100000, -+ S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_SHFT = 0x14, -+ S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_BMSK = 0x10000, -+ S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_SHFT = 0x10, -+ S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_BMSK = 0x1000, -+ S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_SHFT = 0xc, -+ S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_BMSK = 0x100, -+ S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_SHFT = 0x8, -+ S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_BMSK = 0x10, -+ S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_SHFT = 0x4, -+ S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_BMSK = 0x1, -+ S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CMD_OPT_CFG1_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000704) -+enum bimc_s_scmo_cmd_opt_cfg1 { -+ S_SCMO_CMD_OPT_CFG1_RMSK = 0xffffffff, -+ S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_BMSK = 0x1f000000, -+ S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_SHFT = 0x18, -+ S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_BMSK = 0x1f0000, -+ S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_SHFT = 0x10, -+ S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_BMSK = 0x1f00, -+ S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_SHFT = 0x8, -+ S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_BMSK = 0x1f, -+ S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CMD_OPT_CFG2_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000708) -+enum bimc_s_scmo_cmd_opt_cfg2 { -+ S_SCMO_CMD_OPT_CFG2_RMSK = 0xff, -+ S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_BMSK = 0xf, -+ S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_SHFT = 0x0, -+}; -+ -+#define S_SCMO_CMD_OPT_CFG3_ADDR(b, n) \ -+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000070c) -+enum bimc_s_scmo_cmd_opt_cfg3 { -+ S_SCMO_CMD_OPT_CFG3_RMSK = 0xff, -+ S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_BMSK = 0xf, -+ S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_SHFT = 0x0, -+}; -+ -+/* S_SWAY_GENERIC */ -+#define S_SWAY_REG_BASE(b) ((b) + 0x00048000) -+ -+#define S_SWAY_CONFIG_INFO_0_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000020) -+enum bimc_s_sway_config_info_0 { -+ S_SWAY_CONFIG_INFO_0_RMSK = 0xff0000ff, -+ S_SWAY_CONFIG_INFO_0_SYNC_MODE_BMSK = 0xff000000, -+ S_SWAY_CONFIG_INFO_0_SYNC_MODE_SHFT = 0x18, -+ S_SWAY_CONFIG_INFO_0_FUNC_BMSK = 0xff, -+ S_SWAY_CONFIG_INFO_0_FUNC_SHFT = 0x0, -+}; -+ -+#define S_SWAY_CONFIG_INFO_1_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000030) -+enum bimc_s_sway_config_info_1 { -+ S_SWAY_CONFIG_INFO_1_RMSK = 0xffffffff, -+ S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff, -+ S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0, -+}; -+ -+#define S_SWAY_CONFIG_INFO_2_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000040) -+enum bimc_s_sway_config_info_2 { -+ S_SWAY_CONFIG_INFO_2_RMSK = 0xffff0000, -+ S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_BMSK = 0xffff0000, -+ S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_SHFT = 0x10, -+}; -+ -+#define S_SWAY_CONFIG_INFO_3_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000050) -+enum bimc_s_sway_config_info_3 { -+ S_SWAY_CONFIG_INFO_3_RMSK = 0xffffffff, -+ S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_BMSK = 0xff000000, -+ S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_SHFT = 0x18, -+ S_SWAY_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff0000, -+ S_SWAY_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x10, -+ S_SWAY_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff, -+ S_SWAY_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x0, -+}; -+ -+#define S_SWAY_CONFIG_INFO_4_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000060) -+enum bimc_s_sway_config_info_4 { -+ S_SWAY_CONFIG_INFO_4_RMSK = 0x800000ff, -+ S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_BMSK = 0x80000000, -+ S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_SHFT = 0x1f, -+ S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_BMSK = 0xff, -+ S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_SHFT = 0x0, -+}; -+ -+#define S_SWAY_CONFIG_INFO_5_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000070) -+enum bimc_s_sway_config_info_5 { -+ S_SWAY_CONFIG_INFO_5_RMSK = 0x800000ff, -+ S_SWAY_CONFIG_INFO_5_QCH_EN_BMSK = 0x80000000, -+ S_SWAY_CONFIG_INFO_5_QCH_EN_SHFT = 0x1f, -+ S_SWAY_CONFIG_INFO_5_QCH_DEPTH_BMSK = 0xff, -+ S_SWAY_CONFIG_INFO_5_QCH_DEPTH_SHFT = 0x0, -+}; -+ -+#define S_SWAY_CONFIG_INFO_6_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000080) -+enum bimc_s_sway_config_info_6 { -+ S_SWAY_CONFIG_INFO_6_RMSK = 0x1, -+ S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_BMSK = 0x1, -+ S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_SHFT = 0x0, -+}; -+ -+#define S_SWAY_INT_STATUS_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000100) -+enum bimc_s_sway_int_status { -+ S_SWAY_INT_STATUS_RMSK = 0x3, -+ S_SWAY_INT_STATUS_RFU_BMSK = 0x3, -+ S_SWAY_INT_STATUS_RFU_SHFT = 0x0, -+}; -+ -+#define S_SWAY_INT_CLR_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000108) -+enum bimc_s_sway_int_clr { -+ S_SWAY_INT_CLR_RMSK = 0x3, -+ S_SWAY_INT_CLR_RFU_BMSK = 0x3, -+ S_SWAY_INT_CLR_RFU_SHFT = 0x0, -+}; -+ -+ -+#define S_SWAY_INT_EN_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c) -+enum bimc_s_sway_int_en { -+ S_SWAY_INT_EN_RMSK = 0x3, -+ S_SWAY_INT_EN_RFU_BMSK = 0x3, -+ S_SWAY_INT_EN_RFU_SHFT = 0x0, -+}; -+ -+#define S_SWAY_CLK_CTRL_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000200) -+enum bimc_s_sway_clk_ctrl { -+ S_SWAY_CLK_CTRL_RMSK = 0x3, -+ S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK = 0x2, -+ S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT = 0x1, -+ S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1, -+ S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0, -+}; -+ -+#define S_SWAY_RCH_SEL_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000210) -+enum bimc_s_sway_rch_sel { -+ S_SWAY_RCH_SEL_RMSK = 0x7f, -+ S_SWAY_RCH_SEL_UNUSED_BMSK = 0x7f, -+ S_SWAY_RCH_SEL_UNUSED_SHFT = 0x0, -+}; -+ -+ -+#define S_SWAY_MAX_OUTSTANDING_REQS_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000220) -+enum bimc_s_sway_max_outstanding_reqs { -+ S_SWAY_MAX_OUTSTANDING_REQS_RMSK = 0xffff, -+ S_SWAY_MAX_OUTSTANDING_REQS_WRITE_BMSK = 0xff00, -+ S_SWAY_MAX_OUTSTANDING_REQS_WRITE_SHFT = 0x8, -+ S_SWAY_MAX_OUTSTANDING_REQS_READ_BMSK = 0xff, -+ S_SWAY_MAX_OUTSTANDING_REQS_READ_SHFT = 0x0, -+}; -+ -+ -+#define S_SWAY_BUF_STATUS_0_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000400) -+enum bimc_s_sway_buf_status_0 { -+ S_SWAY_BUF_STATUS_0_RMSK = 0xf0300f03, -+ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_BMSK = 0x80000000, -+ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_SHFT = 0x1f, -+ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_BMSK = 0x40000000, -+ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_SHFT = 0x1e, -+ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_BMSK = 0x20000000, -+ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_SHFT = 0x1d, -+ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_BMSK = 0x10000000, -+ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_SHFT = 0x1c, -+ S_SWAY_BUF_STATUS_0_BCH_RD_FULL_BMSK = 0x200000, -+ S_SWAY_BUF_STATUS_0_BCH_RD_FULL_SHFT = 0x15, -+ S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_BMSK = 0x100000, -+ S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_SHFT = 0x14, -+ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_BMSK = 0x800, -+ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_SHFT = 0xb, -+ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_BMSK = 0x400, -+ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_SHFT = 0xa, -+ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_BMSK = 0x200, -+ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_SHFT = 0x9, -+ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_BMSK = 0x100, -+ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_SHFT = 0x8, -+ S_SWAY_BUF_STATUS_0_ACH_WR_FULL_BMSK = 0x2, -+ S_SWAY_BUF_STATUS_0_ACH_WR_FULL_SHFT = 0x1, -+ S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_BMSK = 0x1, -+ S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_SHFT = 0x0, -+}; -+ -+#define S_SWAY_BUF_STATUS_1_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000410) -+enum bimc_s_sway_buf_status_1 { -+ S_SWAY_BUF_STATUS_1_RMSK = 0xf0, -+ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_BMSK = 0x80, -+ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_SHFT = 0x7, -+ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_BMSK = 0x40, -+ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_SHFT = 0x6, -+ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_BMSK = 0x20, -+ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_SHFT = 0x5, -+ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_BMSK = 0x10, -+ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_SHFT = 0x4, -+}; -+ -+#define S_SWAY_BUF_STATUS_2_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000420) -+enum bimc_s_sway_buf_status_2 { -+ S_SWAY_BUF_STATUS_2_RMSK = 0x30, -+ S_SWAY_BUF_STATUS_2_QCH_RD_FULL_BMSK = 0x20, -+ S_SWAY_BUF_STATUS_2_QCH_RD_FULL_SHFT = 0x5, -+ S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_BMSK = 0x10, -+ S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_SHFT = 0x4, -+}; -+ -+/* S_ARB_GENERIC */ -+ -+#define S_ARB_REG_BASE(b) ((b) + 0x00049000) -+ -+#define S_ARB_COMPONENT_INFO_ADDR(b, n) \ -+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000000) -+enum bimc_s_arb_component_info { -+ S_ARB_COMPONENT_INFO_RMSK = 0xffffff, -+ S_ARB_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000, -+ S_ARB_COMPONENT_INFO_INSTANCE_SHFT = 0x10, -+ S_ARB_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00, -+ S_ARB_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8, -+ S_ARB_COMPONENT_INFO_TYPE_BMSK = 0xff, -+ S_ARB_COMPONENT_INFO_TYPE_SHFT = 0x0, -+}; -+ -+#define S_ARB_CONFIG_INFO_0_ADDR(b, n) \ -+ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000020) -+enum bimc_s_arb_config_info_0 { -+ S_ARB_CONFIG_INFO_0_RMSK = 0x800000ff, -+ S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_BMSK = 0x80000000, -+ S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_SHFT = 0x1f, -+ S_ARB_CONFIG_INFO_0_FUNC_BMSK = 0xff, -+ S_ARB_CONFIG_INFO_0_FUNC_SHFT = 0x0, -+}; -+ -+#define S_ARB_CONFIG_INFO_1_ADDR(b, n) \ -+ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000030) -+enum bimc_s_arb_config_info_1 { -+ S_ARB_CONFIG_INFO_1_RMSK = 0xffffffff, -+ S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff, -+ S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0, -+}; -+ -+#define S_ARB_CLK_CTRL_ADDR(b) \ -+ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000200) -+enum bimc_s_arb_clk_ctrl { -+ S_ARB_CLK_CTRL_RMSK = 0x1, -+ S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK = 0x2, -+ S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT = 0x1, -+ S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1, -+ S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0, -+ S_ARB_CLK_CTRL_CLK_GATING_EN_BMSK = 0x1, -+ S_ARB_CLK_CTRL_CLK_GATING_EN_SHFT = 0x0, -+}; -+ -+#define S_ARB_MODE_ADDR(b, n) \ -+ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000210) -+enum bimc_s_arb_mode { -+ S_ARB_MODE_RMSK = 0xf0000001, -+ S_ARB_MODE_WR_GRANTS_AHEAD_BMSK = 0xf0000000, -+ S_ARB_MODE_WR_GRANTS_AHEAD_SHFT = 0x1c, -+ S_ARB_MODE_PRIO_RR_EN_BMSK = 0x1, -+ S_ARB_MODE_PRIO_RR_EN_SHFT = 0x0, -+}; -+ -+#define BKE_HEALTH_MASK \ -+ (M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK |\ -+ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK |\ -+ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK) -+ -+#define BKE_HEALTH_VAL(limit, areq, plvl) \ -+ ((((limit) << M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT) & \ -+ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK) | \ -+ (((areq) << M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT) & \ -+ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK) | \ -+ (((plvl) << M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT) & \ -+ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK)) -+ -+#define MAX_GRANT_PERIOD \ -+ (M_BKE_GP_GP_BMSK >> \ -+ M_BKE_GP_GP_SHFT) -+ -+#define MAX_GC \ -+ (M_BKE_GC_GC_BMSK >> \ -+ (M_BKE_GC_GC_SHFT + 1)) -+ -+static int bimc_div(int64_t *a, uint32_t b) -+{ -+ if ((*a > 0) && (*a < b)) { -+ *a = 0; -+ return 1; -+ } else { -+ return do_div(*a, b); -+ } -+} -+ -+#define ENABLE(val) ((val) == 1 ? 1 : 0) -+void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo, -+ uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate) -+{ -+ uint32_t val, mask, reg_val; -+ void __iomem *addr; -+ -+ reg_val = readl_relaxed(M_CLK_CTRL_ADDR(binfo->base, -+ mas_index)) & M_CLK_CTRL_RMSK; -+ addr = M_CLK_CTRL_ADDR(binfo->base, mas_index); -+ mask = (M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK | -+ M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK); -+ val = (bgate->core_clk_gate_en << -+ M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT) | -+ bgate->port_clk_gate_en; -+ writel_relaxed(((reg_val & (~mask)) | (val & mask)), addr); -+ /* Ensure clock gating enable mask is set before exiting */ -+ wmb(); -+} -+ -+void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo, -+ uint32_t slv_index, bool en) -+{ -+ uint32_t reg_val, reg_mask_val, enable, val; -+ -+ reg_mask_val = (readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo-> -+ base, slv_index)) & S_ARB_CONFIG_INFO_0_FUNC_BMSK) -+ >> S_ARB_CONFIG_INFO_0_FUNC_SHFT; -+ enable = ENABLE(en); -+ val = enable << S_ARB_MODE_PRIO_RR_EN_SHFT; -+ if (reg_mask_val == BIMC_ARB_MODE_PRIORITY_RR) { -+ reg_val = readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo-> -+ base, slv_index)) & S_ARB_MODE_RMSK; -+ writel_relaxed(((reg_val & (~(S_ARB_MODE_PRIO_RR_EN_BMSK))) | -+ (val & S_ARB_MODE_PRIO_RR_EN_BMSK)), -+ S_ARB_MODE_ADDR(binfo->base, slv_index)); -+ /* Ensure arbitration mode is set before returning */ -+ wmb(); -+ } -+} -+ -+static void set_qos_mode(void __iomem *baddr, uint32_t index, uint32_t val0, -+ uint32_t val1, uint32_t val2) -+{ -+ uint32_t reg_val, val; -+ -+ reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR(baddr, -+ index)) & M_PRIOLVL_OVERRIDE_RMSK; -+ val = val0 << M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT; -+ writel_relaxed(((reg_val & ~(M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK)) -+ | (val & M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK)), -+ M_PRIOLVL_OVERRIDE_ADDR(baddr, index)); -+ reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR(baddr, index)) & -+ M_RD_CMD_OVERRIDE_RMSK; -+ val = val1 << M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT; -+ writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK -+ )) | (val & M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)), -+ M_RD_CMD_OVERRIDE_ADDR(baddr, index)); -+ reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR(baddr, index)) & -+ M_WR_CMD_OVERRIDE_RMSK; -+ val = val2 << M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT; -+ writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK -+ )) | (val & M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)), -+ M_WR_CMD_OVERRIDE_ADDR(baddr, index)); -+ /* Ensure the priority register writes go through */ -+ wmb(); -+} -+ -+static void msm_bus_bimc_set_qos_mode(void __iomem *base, -+ uint32_t mas_index, uint8_t qmode_sel) -+{ -+ uint32_t reg_val, val; -+ -+ switch (qmode_sel) { -+ case BIMC_QOS_MODE_FIXED: -+ reg_val = readl_relaxed(M_BKE_EN_ADDR(base, -+ mas_index)); -+ writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)), -+ M_BKE_EN_ADDR(base, mas_index)); -+ /* Ensure that the book-keeping register writes -+ * go through before setting QoS mode. -+ * QoS mode registers might write beyond 1K -+ * boundary in future -+ */ -+ wmb(); -+ set_qos_mode(base, mas_index, 1, 1, 1); -+ break; -+ -+ case BIMC_QOS_MODE_BYPASS: -+ reg_val = readl_relaxed(M_BKE_EN_ADDR(base, -+ mas_index)); -+ writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)), -+ M_BKE_EN_ADDR(base, mas_index)); -+ /* Ensure that the book-keeping register writes -+ * go through before setting QoS mode. -+ * QoS mode registers might write beyond 1K -+ * boundary in future -+ */ -+ wmb(); -+ set_qos_mode(base, mas_index, 0, 0, 0); -+ break; -+ -+ case BIMC_QOS_MODE_REGULATOR: -+ case BIMC_QOS_MODE_LIMITER: -+ set_qos_mode(base, mas_index, 0, 0, 0); -+ reg_val = readl_relaxed(M_BKE_EN_ADDR(base, -+ mas_index)); -+ val = 1 << M_BKE_EN_EN_SHFT; -+ /* Ensure that the book-keeping register writes -+ * go through before setting QoS mode. -+ * QoS mode registers might write beyond 1K -+ * boundary in future -+ */ -+ wmb(); -+ writel_relaxed(((reg_val & (~M_BKE_EN_EN_BMSK)) | (val & -+ M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(base, -+ mas_index)); -+ break; -+ default: -+ break; -+ } -+} -+ -+static void set_qos_prio_rl(void __iomem *addr, uint32_t rmsk, -+ uint8_t index, struct msm_bus_bimc_qos_mode *qmode) -+{ -+ uint32_t reg_val, val0, val; -+ -+ /* Note, addr is already passed with right mas_index */ -+ reg_val = readl_relaxed(addr) & rmsk; -+ val0 = BKE_HEALTH_VAL(qmode->rl.qhealth[index].limit_commands, -+ qmode->rl.qhealth[index].areq_prio, -+ qmode->rl.qhealth[index].prio_level); -+ val = ((reg_val & (~(BKE_HEALTH_MASK))) | (val0 & BKE_HEALTH_MASK)); -+ writel_relaxed(val, addr); -+ /* Ensure that priority for regulator/limiter modes are -+ * set before returning -+ */ -+ wmb(); -+ -+} -+ -+static void msm_bus_bimc_set_qos_prio(void __iomem *base, -+ uint32_t mas_index, uint8_t qmode_sel, -+ struct msm_bus_bimc_qos_mode *qmode) -+{ -+ uint32_t reg_val, val; -+ -+ switch (qmode_sel) { -+ case BIMC_QOS_MODE_FIXED: -+ reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR( -+ base, mas_index)) & M_PRIOLVL_OVERRIDE_RMSK; -+ val = qmode->fixed.prio_level << -+ M_PRIOLVL_OVERRIDE_SHFT; -+ writel_relaxed(((reg_val & -+ ~(M_PRIOLVL_OVERRIDE_BMSK)) | (val -+ & M_PRIOLVL_OVERRIDE_BMSK)), -+ M_PRIOLVL_OVERRIDE_ADDR(base, mas_index)); -+ -+ reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR( -+ base, mas_index)) & M_RD_CMD_OVERRIDE_RMSK; -+ val = qmode->fixed.areq_prio_rd << -+ M_RD_CMD_OVERRIDE_AREQPRIO_SHFT; -+ writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_AREQPRIO_BMSK)) -+ | (val & M_RD_CMD_OVERRIDE_AREQPRIO_BMSK)), -+ M_RD_CMD_OVERRIDE_ADDR(base, mas_index)); -+ -+ reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR( -+ base, mas_index)) & M_WR_CMD_OVERRIDE_RMSK; -+ val = qmode->fixed.areq_prio_wr << -+ M_WR_CMD_OVERRIDE_AREQPRIO_SHFT; -+ writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_AREQPRIO_BMSK)) -+ | (val & M_WR_CMD_OVERRIDE_AREQPRIO_BMSK)), -+ M_WR_CMD_OVERRIDE_ADDR(base, mas_index)); -+ /* Ensure that fixed mode register writes go through -+ * before returning -+ */ -+ wmb(); -+ break; -+ -+ case BIMC_QOS_MODE_REGULATOR: -+ case BIMC_QOS_MODE_LIMITER: -+ set_qos_prio_rl(M_BKE_HEALTH_3_CONFIG_ADDR(base, -+ mas_index), M_BKE_HEALTH_3_CONFIG_RMSK, 3, qmode); -+ set_qos_prio_rl(M_BKE_HEALTH_2_CONFIG_ADDR(base, -+ mas_index), M_BKE_HEALTH_2_CONFIG_RMSK, 2, qmode); -+ set_qos_prio_rl(M_BKE_HEALTH_1_CONFIG_ADDR(base, -+ mas_index), M_BKE_HEALTH_1_CONFIG_RMSK, 1, qmode); -+ set_qos_prio_rl(M_BKE_HEALTH_0_CONFIG_ADDR(base, -+ mas_index), M_BKE_HEALTH_0_CONFIG_RMSK, 0 , qmode); -+ break; -+ case BIMC_QOS_MODE_BYPASS: -+ default: -+ break; -+ } -+} -+ -+static void set_qos_bw_regs(void __iomem *baddr, uint32_t mas_index, -+ int32_t th, int32_t tm, int32_t tl, uint32_t gp, -+ uint32_t gc) -+{ -+ int32_t reg_val, val; -+ int32_t bke_reg_val; -+ int16_t val2; -+ -+ /* Disable BKE before writing to registers as per spec */ -+ bke_reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index)); -+ writel_relaxed((bke_reg_val & ~(M_BKE_EN_EN_BMSK)), -+ M_BKE_EN_ADDR(baddr, mas_index)); -+ -+ /* Write values of registers calculated */ -+ reg_val = readl_relaxed(M_BKE_GP_ADDR(baddr, mas_index)) -+ & M_BKE_GP_RMSK; -+ val = gp << M_BKE_GP_GP_SHFT; -+ writel_relaxed(((reg_val & ~(M_BKE_GP_GP_BMSK)) | (val & -+ M_BKE_GP_GP_BMSK)), M_BKE_GP_ADDR(baddr, mas_index)); -+ -+ reg_val = readl_relaxed(M_BKE_GC_ADDR(baddr, mas_index)) & -+ M_BKE_GC_RMSK; -+ val = gc << M_BKE_GC_GC_SHFT; -+ writel_relaxed(((reg_val & ~(M_BKE_GC_GC_BMSK)) | (val & -+ M_BKE_GC_GC_BMSK)), M_BKE_GC_ADDR(baddr, mas_index)); -+ -+ reg_val = readl_relaxed(M_BKE_THH_ADDR(baddr, mas_index)) & -+ M_BKE_THH_RMSK; -+ val = th << M_BKE_THH_THRESH_SHFT; -+ writel_relaxed(((reg_val & ~(M_BKE_THH_THRESH_BMSK)) | (val & -+ M_BKE_THH_THRESH_BMSK)), M_BKE_THH_ADDR(baddr, mas_index)); -+ -+ reg_val = readl_relaxed(M_BKE_THM_ADDR(baddr, mas_index)) & -+ M_BKE_THM_RMSK; -+ val2 = tm << M_BKE_THM_THRESH_SHFT; -+ writel_relaxed(((reg_val & ~(M_BKE_THM_THRESH_BMSK)) | (val2 & -+ M_BKE_THM_THRESH_BMSK)), M_BKE_THM_ADDR(baddr, mas_index)); -+ -+ reg_val = readl_relaxed(M_BKE_THL_ADDR(baddr, mas_index)) & -+ M_BKE_THL_RMSK; -+ val2 = tl << M_BKE_THL_THRESH_SHFT; -+ writel_relaxed(((reg_val & ~(M_BKE_THL_THRESH_BMSK)) | -+ (val2 & M_BKE_THL_THRESH_BMSK)), M_BKE_THL_ADDR(baddr, -+ mas_index)); -+ -+ /* Ensure that all bandwidth register writes have completed -+ * before returning -+ */ -+ wmb(); -+} -+ -+static void msm_bus_bimc_set_qos_bw(void __iomem *base, uint32_t qos_freq, -+ uint32_t mas_index, struct msm_bus_bimc_qos_bw *qbw) -+{ -+ uint32_t bke_en; -+ -+ /* Validate QOS Frequency */ -+ if (qos_freq == 0) { -+ MSM_BUS_DBG("Zero frequency\n"); -+ return; -+ } -+ -+ /* Get enable bit for BKE before programming the period */ -+ bke_en = (readl_relaxed(M_BKE_EN_ADDR(base, mas_index)) & -+ M_BKE_EN_EN_BMSK) >> M_BKE_EN_EN_SHFT; -+ -+ /* Only calculate if there's a requested bandwidth and window */ -+ if (qbw->bw && qbw->ws) { -+ int64_t th, tm, tl; -+ uint32_t gp, gc; -+ int64_t gp_nominal, gp_required, gp_calc, data, temp; -+ int64_t win = qbw->ws * qos_freq; -+ temp = win; -+ /* -+ * Calculate nominal grant period defined by requested -+ * window size. -+ * Ceil this value to max grant period. -+ */ -+ bimc_div(&temp, 1000000); -+ gp_nominal = min_t(uint64_t, MAX_GRANT_PERIOD, temp); -+ /* -+ * Calculate max window size, defined by bw request. -+ * Units: (KHz, MB/s) -+ */ -+ gp_calc = MAX_GC * qos_freq * 1000; -+ gp_required = gp_calc; -+ bimc_div(&gp_required, qbw->bw); -+ -+ /* User min of two grant periods */ -+ gp = min_t(int64_t, gp_nominal, gp_required); -+ -+ /* Calculate bandwith in grants and ceil. */ -+ temp = qbw->bw * gp; -+ data = qos_freq * 1000; -+ bimc_div(&temp, data); -+ gc = min_t(int64_t, MAX_GC, temp); -+ -+ /* Calculate thresholds */ -+ th = qbw->bw - qbw->thh; -+ tm = qbw->bw - qbw->thm; -+ tl = qbw->bw - qbw->thl; -+ -+ th = th * gp; -+ bimc_div(&th, data); -+ tm = tm * gp; -+ bimc_div(&tm, data); -+ tl = tl * gp; -+ bimc_div(&tl, data); -+ -+ MSM_BUS_DBG("BIMC: BW: mas_index: %d, th: %llu tm: %llu\n", -+ mas_index, th, tm); -+ MSM_BUS_DBG("BIMC: tl: %llu gp:%u gc: %u bke_en: %u\n", -+ tl, gp, gc, bke_en); -+ set_qos_bw_regs(base, mas_index, th, tm, tl, gp, gc); -+ } else -+ /* Clear bandwidth registers */ -+ set_qos_bw_regs(base, mas_index, 0, 0, 0, 0, 0); -+} -+ -+static int msm_bus_bimc_allocate_commit_data(struct msm_bus_fabric_registration -+ *fab_pdata, void **cdata, int ctx) -+{ -+ struct msm_bus_bimc_commit **cd = (struct msm_bus_bimc_commit **)cdata; -+ struct msm_bus_bimc_info *binfo = -+ (struct msm_bus_bimc_info *)fab_pdata->hw_data; -+ -+ MSM_BUS_DBG("Allocating BIMC commit data\n"); -+ *cd = kzalloc(sizeof(struct msm_bus_bimc_commit), GFP_KERNEL); -+ if (!*cd) { -+ MSM_BUS_DBG("Couldn't alloc mem for cdata\n"); -+ return -ENOMEM; -+ } -+ -+ (*cd)->mas = binfo->cdata[ctx].mas; -+ (*cd)->slv = binfo->cdata[ctx].slv; -+ -+ return 0; -+} -+ -+static void *msm_bus_bimc_allocate_bimc_data(struct platform_device *pdev, -+ struct msm_bus_fabric_registration *fab_pdata) -+{ -+ struct resource *bimc_mem; -+ struct resource *bimc_io; -+ struct msm_bus_bimc_info *binfo; -+ int i; -+ -+ MSM_BUS_DBG("Allocating BIMC data\n"); -+ binfo = kzalloc(sizeof(struct msm_bus_bimc_info), GFP_KERNEL); -+ if (!binfo) { -+ WARN(!binfo, "Couldn't alloc mem for bimc_info\n"); -+ return NULL; -+ } -+ -+ binfo->qos_freq = fab_pdata->qos_freq; -+ -+ binfo->params.nmasters = fab_pdata->nmasters; -+ binfo->params.nslaves = fab_pdata->nslaves; -+ binfo->params.bus_id = fab_pdata->id; -+ -+ for (i = 0; i < NUM_CTX; i++) { -+ binfo->cdata[i].mas = kzalloc(sizeof(struct -+ msm_bus_node_hw_info) * fab_pdata->nmasters * 2, -+ GFP_KERNEL); -+ if (!binfo->cdata[i].mas) { -+ MSM_BUS_ERR("Couldn't alloc mem for bimc master hw\n"); -+ kfree(binfo); -+ return NULL; -+ } -+ -+ binfo->cdata[i].slv = kzalloc(sizeof(struct -+ msm_bus_node_hw_info) * fab_pdata->nslaves * 2, -+ GFP_KERNEL); -+ if (!binfo->cdata[i].slv) { -+ MSM_BUS_DBG("Couldn't alloc mem for bimc slave hw\n"); -+ kfree(binfo->cdata[i].mas); -+ kfree(binfo); -+ return NULL; -+ } -+ } -+ -+ if (fab_pdata->virt) { -+ MSM_BUS_DBG("Don't get memory regions for virtual fabric\n"); -+ goto skip_mem; -+ } -+ -+ bimc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!bimc_mem) { -+ MSM_BUS_ERR("Cannot get BIMC Base address\n"); -+ kfree(binfo); -+ return NULL; -+ } -+ -+ bimc_io = request_mem_region(bimc_mem->start, -+ resource_size(bimc_mem), pdev->name); -+ if (!bimc_io) { -+ MSM_BUS_ERR("BIMC memory unavailable\n"); -+ kfree(binfo); -+ return NULL; -+ } -+ -+ binfo->base = ioremap(bimc_mem->start, resource_size(bimc_mem)); -+ if (!binfo->base) { -+ MSM_BUS_ERR("IOremap failed for BIMC!\n"); -+ release_mem_region(bimc_mem->start, resource_size(bimc_mem)); -+ kfree(binfo); -+ return NULL; -+ } -+ -+skip_mem: -+ fab_pdata->hw_data = (void *)binfo; -+ return (void *)binfo; -+} -+ -+static void free_commit_data(void *cdata) -+{ -+ struct msm_bus_bimc_commit *cd = (struct msm_bus_bimc_commit *)cdata; -+ -+ kfree(cd->mas); -+ kfree(cd->slv); -+ kfree(cd); -+} -+ -+static void bke_switch( -+ void __iomem *baddr, uint32_t mas_index, bool req, int mode) -+{ -+ uint32_t reg_val, val, cur_val; -+ -+ val = req << M_BKE_EN_EN_SHFT; -+ reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index)); -+ cur_val = reg_val & M_BKE_EN_RMSK; -+ if (val == cur_val) -+ return; -+ -+ if (!req && mode == BIMC_QOS_MODE_FIXED) -+ set_qos_mode(baddr, mas_index, 1, 1, 1); -+ -+ writel_relaxed(((reg_val & ~(M_BKE_EN_EN_BMSK)) | (val & -+ M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(baddr, mas_index)); -+ /* Make sure BKE on/off goes through before changing priorities */ -+ wmb(); -+ -+ if (req) -+ set_qos_mode(baddr, mas_index, 0, 0, 0); -+} -+ -+static void bimc_set_static_qos_bw(void __iomem *base, unsigned int qos_freq, -+ int mport, struct msm_bus_bimc_qos_bw *qbw) -+{ -+ int32_t bw_mbps, thh = 0, thm, thl, gc; -+ int32_t gp; -+ u64 temp; -+ -+ if (qos_freq == 0) { -+ MSM_BUS_DBG("No QoS Frequency.\n"); -+ return; -+ } -+ -+ if (!(qbw->bw && qbw->gp)) { -+ MSM_BUS_DBG("No QoS Bandwidth or Window size\n"); -+ return; -+ } -+ -+ /* Convert bandwidth to MBPS */ -+ temp = qbw->bw; -+ bimc_div(&temp, 1000000); -+ bw_mbps = temp; -+ -+ /* Grant period in clock cycles -+ * Grant period from bandwidth structure -+ * is in nano seconds, QoS freq is in KHz. -+ * Divide by 1000 to get clock cycles. -+ */ -+ gp = (qos_freq * qbw->gp) / (1000 * NSEC_PER_USEC); -+ -+ /* Grant count = BW in MBps * Grant period -+ * in micro seconds -+ */ -+ gc = bw_mbps * (qbw->gp / NSEC_PER_USEC); -+ gc = min(gc, MAX_GC); -+ -+ /* Medium threshold = -((Medium Threshold percentage * -+ * Grant count) / 100) -+ */ -+ thm = -((qbw->thmp * gc) / 100); -+ qbw->thm = thm; -+ -+ /* Low threshold = -(Grant count) */ -+ thl = -gc; -+ qbw->thl = thl; -+ -+ MSM_BUS_DBG("%s: BKE parameters: gp %d, gc %d, thm %d thl %d thh %d", -+ __func__, gp, gc, thm, thl, thh); -+ -+ trace_bus_bke_params(gc, gp, thl, thm, thl); -+ set_qos_bw_regs(base, mport, thh, thm, thl, gp, gc); -+} -+ -+static void msm_bus_bimc_config_master( -+ struct msm_bus_fabric_registration *fab_pdata, -+ struct msm_bus_inode_info *info, -+ uint64_t req_clk, uint64_t req_bw) -+{ -+ int mode, i, ports; -+ struct msm_bus_bimc_info *binfo; -+ uint64_t bw = 0; -+ -+ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data; -+ ports = info->node_info->num_mports; -+ -+ /** -+ * Here check the details of dual configuration. -+ * Take actions based on different modes. -+ * Check for threshold if limiter mode, etc. -+ */ -+ -+ if (req_clk <= info->node_info->th[0]) { -+ mode = info->node_info->mode; -+ bw = info->node_info->bimc_bw[0]; -+ } else if ((info->node_info->num_thresh > 1) && -+ (req_clk <= info->node_info->th[1])) { -+ mode = info->node_info->mode; -+ bw = info->node_info->bimc_bw[1]; -+ } else -+ mode = info->node_info->mode_thresh; -+ -+ switch (mode) { -+ case BIMC_QOS_MODE_BYPASS: -+ case BIMC_QOS_MODE_FIXED: -+ for (i = 0; i < ports; i++) -+ bke_switch(binfo->base, info->node_info->qport[i], -+ BKE_OFF, mode); -+ break; -+ case BIMC_QOS_MODE_REGULATOR: -+ case BIMC_QOS_MODE_LIMITER: -+ for (i = 0; i < ports; i++) { -+ /* If not in fixed mode, update bandwidth */ -+ if ((info->node_info->cur_lim_bw != bw) -+ && (mode != BIMC_QOS_MODE_FIXED)) { -+ struct msm_bus_bimc_qos_bw qbw; -+ qbw.ws = info->node_info->ws; -+ qbw.bw = bw; -+ qbw.gp = info->node_info->bimc_gp; -+ qbw.thmp = info->node_info->bimc_thmp; -+ bimc_set_static_qos_bw(binfo->base, -+ binfo->qos_freq, -+ info->node_info->qport[i], &qbw); -+ info->node_info->cur_lim_bw = bw; -+ MSM_BUS_DBG("%s: Qos is %d reqclk %llu bw %llu", -+ __func__, mode, req_clk, bw); -+ } -+ bke_switch(binfo->base, info->node_info->qport[i], -+ BKE_ON, mode); -+ } -+ break; -+ default: -+ break; -+ } -+} -+ -+static void msm_bus_bimc_update_bw(struct msm_bus_inode_info *hop, -+ struct msm_bus_inode_info *info, -+ struct msm_bus_fabric_registration *fab_pdata, -+ void *sel_cdata, int *master_tiers, -+ int64_t add_bw) -+{ -+ struct msm_bus_bimc_info *binfo; -+ struct msm_bus_bimc_qos_bw qbw; -+ int i; -+ int64_t bw; -+ int ports = info->node_info->num_mports; -+ struct msm_bus_bimc_commit *sel_cd = -+ (struct msm_bus_bimc_commit *)sel_cdata; -+ -+ MSM_BUS_DBG("BIMC: Update bw for ID %d, with IID: %d: %lld\n", -+ info->node_info->id, info->node_info->priv_id, add_bw); -+ -+ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data; -+ -+ if (info->node_info->num_mports == 0) { -+ MSM_BUS_DBG("BIMC: Skip Master BW\n"); -+ goto skip_mas_bw; -+ } -+ -+ ports = info->node_info->num_mports; -+ bw = INTERLEAVED_BW(fab_pdata, add_bw, ports); -+ -+ for (i = 0; i < ports; i++) { -+ sel_cd->mas[info->node_info->masterp[i]].bw += bw; -+ sel_cd->mas[info->node_info->masterp[i]].hw_id = -+ info->node_info->mas_hw_id; -+ MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n", -+ info->node_info->priv_id, -+ sel_cd->mas[info->node_info->masterp[i]].bw); -+ if (info->node_info->hw_sel == MSM_BUS_RPM) -+ sel_cd->mas[info->node_info->masterp[i]].dirty = 1; -+ else { -+ if (!info->node_info->qport) { -+ MSM_BUS_DBG("No qos ports to update!\n"); -+ break; -+ } -+ if (!(info->node_info->mode == BIMC_QOS_MODE_REGULATOR) -+ || (info->node_info->mode == -+ BIMC_QOS_MODE_LIMITER)) { -+ MSM_BUS_DBG("Skip QoS reg programming\n"); -+ break; -+ } -+ -+ MSM_BUS_DBG("qport: %d\n", info->node_info->qport[i]); -+ qbw.bw = sel_cd->mas[info->node_info->masterp[i]].bw; -+ qbw.ws = info->node_info->ws; -+ /* Threshold low = 90% of bw */ -+ qbw.thl = div_s64((90 * bw), 100); -+ /* Threshold medium = bw */ -+ qbw.thm = bw; -+ /* Threshold high = 10% more than bw */ -+ qbw.thh = div_s64((110 * bw), 100); -+ /* Check if info is a shared master. -+ * If it is, mark it dirty -+ * If it isn't, then set QOS Bandwidth. -+ * Also if dual-conf is set, don't program bw regs. -+ **/ -+ if (!info->node_info->dual_conf && -+ ((info->node_info->mode == BIMC_QOS_MODE_LIMITER) || -+ (info->node_info->mode == BIMC_QOS_MODE_REGULATOR))) -+ msm_bus_bimc_set_qos_bw(binfo->base, -+ binfo->qos_freq, -+ info->node_info->qport[i], &qbw); -+ } -+ } -+ -+skip_mas_bw: -+ ports = hop->node_info->num_sports; -+ MSM_BUS_DBG("BIMC: ID: %d, Sports: %d\n", hop->node_info->priv_id, -+ ports); -+ -+ for (i = 0; i < ports; i++) { -+ sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw; -+ sel_cd->slv[hop->node_info->slavep[i]].hw_id = -+ hop->node_info->slv_hw_id; -+ MSM_BUS_DBG("BIMC: Update slave_bw: ID: %d -> %llu\n", -+ hop->node_info->priv_id, -+ sel_cd->slv[hop->node_info->slavep[i]].bw); -+ MSM_BUS_DBG("BIMC: Update slave_bw: index: %d\n", -+ hop->node_info->slavep[i]); -+ /* Check if hop is a shared slave. -+ * If it is, mark it dirty -+ * If it isn't, then nothing to be done as the -+ * slaves are in bypass mode. -+ **/ -+ if (hop->node_info->hw_sel == MSM_BUS_RPM) { -+ MSM_BUS_DBG("Slave dirty: %d, slavep: %d\n", -+ hop->node_info->priv_id, -+ hop->node_info->slavep[i]); -+ sel_cd->slv[hop->node_info->slavep[i]].dirty = 1; -+ } -+ } -+} -+ -+static int msm_bus_bimc_commit(struct msm_bus_fabric_registration -+ *fab_pdata, void *hw_data, void **cdata) -+{ -+ MSM_BUS_DBG("\nReached BIMC Commit\n"); -+ msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata); -+ return 0; -+} -+ -+static void msm_bus_bimc_config_limiter( -+ struct msm_bus_fabric_registration *fab_pdata, -+ struct msm_bus_inode_info *info) -+{ -+ struct msm_bus_bimc_info *binfo; -+ int mode, i, ports; -+ -+ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data; -+ ports = info->node_info->num_mports; -+ -+ if (!info->node_info->qport) { -+ MSM_BUS_DBG("No QoS Ports to init\n"); -+ return; -+ } -+ -+ if (info->cur_lim_bw) -+ mode = BIMC_QOS_MODE_LIMITER; -+ else -+ mode = info->node_info->mode; -+ -+ switch (mode) { -+ case BIMC_QOS_MODE_BYPASS: -+ case BIMC_QOS_MODE_FIXED: -+ for (i = 0; i < ports; i++) -+ bke_switch(binfo->base, info->node_info->qport[i], -+ BKE_OFF, mode); -+ break; -+ case BIMC_QOS_MODE_REGULATOR: -+ case BIMC_QOS_MODE_LIMITER: -+ if (info->cur_lim_bw != info->cur_prg_bw) { -+ MSM_BUS_DBG("Enabled BKE throttling node %d to %llu\n", -+ info->node_info->id, info->cur_lim_bw); -+ trace_bus_bimc_config_limiter(info->node_info->id, -+ info->cur_lim_bw); -+ for (i = 0; i < ports; i++) { -+ /* If not in fixed mode, update bandwidth */ -+ struct msm_bus_bimc_qos_bw qbw; -+ -+ qbw.ws = info->node_info->ws; -+ qbw.bw = info->cur_lim_bw; -+ qbw.gp = info->node_info->bimc_gp; -+ qbw.thmp = info->node_info->bimc_thmp; -+ bimc_set_static_qos_bw(binfo->base, -+ binfo->qos_freq, -+ info->node_info->qport[i], &qbw); -+ bke_switch(binfo->base, -+ info->node_info->qport[i], -+ BKE_ON, mode); -+ info->cur_prg_bw = qbw.bw; -+ } -+ } -+ break; -+ default: -+ break; -+ } -+} -+ -+static void bimc_init_mas_reg(struct msm_bus_bimc_info *binfo, -+ struct msm_bus_inode_info *info, -+ struct msm_bus_bimc_qos_mode *qmode, int mode) -+{ -+ int i; -+ -+ switch (mode) { -+ case BIMC_QOS_MODE_FIXED: -+ qmode->fixed.prio_level = info->node_info->prio_lvl; -+ qmode->fixed.areq_prio_rd = info->node_info->prio_rd; -+ qmode->fixed.areq_prio_wr = info->node_info->prio_wr; -+ break; -+ case BIMC_QOS_MODE_LIMITER: -+ qmode->rl.qhealth[0].limit_commands = 1; -+ qmode->rl.qhealth[1].limit_commands = 0; -+ qmode->rl.qhealth[2].limit_commands = 0; -+ qmode->rl.qhealth[3].limit_commands = 0; -+ break; -+ default: -+ break; -+ } -+ -+ if (!info->node_info->qport) { -+ MSM_BUS_DBG("No QoS Ports to init\n"); -+ return; -+ } -+ -+ for (i = 0; i < info->node_info->num_mports; i++) { -+ /* If not in bypass mode, update priority */ -+ if (mode != BIMC_QOS_MODE_BYPASS) { -+ msm_bus_bimc_set_qos_prio(binfo->base, -+ info->node_info-> -+ qport[i], mode, qmode); -+ -+ /* If not in fixed mode, update bandwidth */ -+ if (mode != BIMC_QOS_MODE_FIXED) { -+ struct msm_bus_bimc_qos_bw qbw; -+ qbw.ws = info->node_info->ws; -+ qbw.bw = info->node_info->bimc_bw[0]; -+ qbw.gp = info->node_info->bimc_gp; -+ qbw.thmp = info->node_info->bimc_thmp; -+ bimc_set_static_qos_bw(binfo->base, -+ binfo->qos_freq, -+ info->node_info->qport[i], &qbw); -+ } -+ } -+ -+ /* set mode */ -+ msm_bus_bimc_set_qos_mode(binfo->base, -+ info->node_info->qport[i], -+ mode); -+ } -+} -+ -+static void init_health_regs(struct msm_bus_bimc_info *binfo, -+ struct msm_bus_inode_info *info, -+ struct msm_bus_bimc_qos_mode *qmode, -+ int mode) -+{ -+ int i; -+ -+ if (mode == BIMC_QOS_MODE_LIMITER) { -+ qmode->rl.qhealth[0].limit_commands = 1; -+ qmode->rl.qhealth[1].limit_commands = 0; -+ qmode->rl.qhealth[2].limit_commands = 0; -+ qmode->rl.qhealth[3].limit_commands = 0; -+ -+ if (!info->node_info->qport) { -+ MSM_BUS_DBG("No QoS Ports to init\n"); -+ return; -+ } -+ -+ for (i = 0; i < info->node_info->num_mports; i++) { -+ /* If not in bypass mode, update priority */ -+ if (mode != BIMC_QOS_MODE_BYPASS) -+ msm_bus_bimc_set_qos_prio(binfo->base, -+ info->node_info->qport[i], mode, qmode); -+ } -+ } -+} -+ -+ -+static int msm_bus_bimc_mas_init(struct msm_bus_bimc_info *binfo, -+ struct msm_bus_inode_info *info) -+{ -+ struct msm_bus_bimc_qos_mode *qmode; -+ qmode = kzalloc(sizeof(struct msm_bus_bimc_qos_mode), -+ GFP_KERNEL); -+ if (!qmode) { -+ MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n", -+ info->node_info->id); -+ return -ENOMEM; -+ } -+ -+ info->hw_data = (void *)qmode; -+ -+ /** -+ * If the master supports dual configuration, -+ * configure registers for both modes -+ */ -+ if (info->node_info->dual_conf) -+ bimc_init_mas_reg(binfo, info, qmode, -+ info->node_info->mode_thresh); -+ else if (info->node_info->nr_lim) -+ init_health_regs(binfo, info, qmode, BIMC_QOS_MODE_LIMITER); -+ -+ bimc_init_mas_reg(binfo, info, qmode, info->node_info->mode); -+ return 0; -+} -+ -+static void msm_bus_bimc_node_init(void *hw_data, -+ struct msm_bus_inode_info *info) -+{ -+ struct msm_bus_bimc_info *binfo = -+ (struct msm_bus_bimc_info *)hw_data; -+ -+ if (!IS_SLAVE(info->node_info->priv_id) && -+ (info->node_info->hw_sel != MSM_BUS_RPM)) -+ msm_bus_bimc_mas_init(binfo, info); -+} -+ -+static int msm_bus_bimc_port_halt(uint32_t haltid, uint8_t mport) -+{ -+ return 0; -+} -+ -+static int msm_bus_bimc_port_unhalt(uint32_t haltid, uint8_t mport) -+{ -+ return 0; -+} -+ -+static int msm_bus_bimc_limit_mport(struct msm_bus_node_device_type *info, -+ void __iomem *qos_base, uint32_t qos_off, -+ uint32_t qos_delta, uint32_t qos_freq, -+ bool enable_lim, u64 lim_bw) -+{ -+ int mode; -+ int i; -+ -+ if (ZERO_OR_NULL_PTR(info->node_info->qport)) { -+ MSM_BUS_DBG("No QoS Ports to limit\n"); -+ return 0; -+ } -+ -+ if (enable_lim && lim_bw) { -+ mode = BIMC_QOS_MODE_LIMITER; -+ -+ if (!info->node_info->lim_bw) { -+ struct msm_bus_bimc_qos_mode qmode; -+ qmode.rl.qhealth[0].limit_commands = 1; -+ qmode.rl.qhealth[1].limit_commands = 0; -+ qmode.rl.qhealth[2].limit_commands = 0; -+ qmode.rl.qhealth[3].limit_commands = 0; -+ -+ for (i = 0; i < info->node_info->num_qports; i++) { -+ /* If not in bypass mode, update priority */ -+ if (mode != BIMC_QOS_MODE_BYPASS) -+ msm_bus_bimc_set_qos_prio(qos_base, -+ info->node_info->qport[i], mode, -+ &qmode); -+ } -+ } -+ -+ for (i = 0; i < info->node_info->num_qports; i++) { -+ struct msm_bus_bimc_qos_bw qbw; -+ /* If not in fixed mode, update bandwidth */ -+ if ((info->node_info->lim_bw != lim_bw)) { -+ qbw.ws = info->node_info->qos_params.ws; -+ qbw.bw = lim_bw; -+ qbw.gp = info->node_info->qos_params.gp; -+ qbw.thmp = info->node_info->qos_params.thmp; -+ bimc_set_static_qos_bw(qos_base, qos_freq, -+ info->node_info->qport[i], &qbw); -+ } -+ bke_switch(qos_base, info->node_info->qport[i], -+ BKE_ON, mode); -+ } -+ info->node_info->lim_bw = lim_bw; -+ } else { -+ mode = info->node_info->qos_params.mode; -+ for (i = 0; i < info->node_info->num_qports; i++) { -+ bke_switch(qos_base, info->node_info->qport[i], -+ BKE_OFF, mode); -+ } -+ } -+ info->node_info->qos_params.cur_mode = mode; -+ return 0; -+} -+ -+static bool msm_bus_bimc_update_bw_reg(int mode) -+{ -+ bool ret = false; -+ -+ if ((mode == BIMC_QOS_MODE_LIMITER) -+ || (mode == BIMC_QOS_MODE_REGULATOR)) -+ ret = true; -+ -+ return ret; -+} -+ -+static int msm_bus_bimc_qos_init(struct msm_bus_node_device_type *info, -+ void __iomem *qos_base, -+ uint32_t qos_off, uint32_t qos_delta, -+ uint32_t qos_freq) -+{ -+ int i; -+ struct msm_bus_bimc_qos_mode qmode; -+ -+ switch (info->node_info->qos_params.mode) { -+ case BIMC_QOS_MODE_FIXED: -+ qmode.fixed.prio_level = info->node_info->qos_params.prio_lvl; -+ qmode.fixed.areq_prio_rd = info->node_info->qos_params.prio_rd; -+ qmode.fixed.areq_prio_wr = info->node_info->qos_params.prio_wr; -+ break; -+ case BIMC_QOS_MODE_LIMITER: -+ qmode.rl.qhealth[0].limit_commands = 1; -+ qmode.rl.qhealth[1].limit_commands = 0; -+ qmode.rl.qhealth[2].limit_commands = 0; -+ qmode.rl.qhealth[3].limit_commands = 0; -+ break; -+ default: -+ break; -+ } -+ -+ if (ZERO_OR_NULL_PTR(info->node_info->qport)) { -+ MSM_BUS_DBG("No QoS Ports to init\n"); -+ return 0; -+ } -+ -+ for (i = 0; i < info->node_info->num_qports; i++) { -+ /* If not in bypass mode, update priority */ -+ if (info->node_info->qos_params.mode != BIMC_QOS_MODE_BYPASS) -+ msm_bus_bimc_set_qos_prio(qos_base, info->node_info-> -+ qport[i], info->node_info->qos_params.mode, -+ &qmode); -+ -+ /* set mode */ -+ if (info->node_info->qos_params.mode == BIMC_QOS_MODE_LIMITER) -+ bke_switch(qos_base, info->node_info->qport[i], -+ BKE_OFF, BIMC_QOS_MODE_FIXED); -+ else -+ msm_bus_bimc_set_qos_mode(qos_base, -+ info->node_info->qport[i], -+ info->node_info->qos_params.mode); -+ } -+ -+ return 0; -+} -+ -+static int msm_bus_bimc_set_bw(struct msm_bus_node_device_type *dev, -+ void __iomem *qos_base, uint32_t qos_off, -+ uint32_t qos_delta, uint32_t qos_freq) -+{ -+ struct msm_bus_bimc_qos_bw qbw; -+ int i; -+ int64_t bw = 0; -+ int ret = 0; -+ struct msm_bus_node_info_type *info = dev->node_info; -+ -+ if (info && info->num_qports && -+ ((info->qos_params.mode == BIMC_QOS_MODE_LIMITER) || -+ (info->qos_params.mode == BIMC_QOS_MODE_REGULATOR))) { -+ bw = msm_bus_div64(info->num_qports, -+ dev->node_ab.ab[DUAL_CTX]); -+ -+ for (i = 0; i < info->num_qports; i++) { -+ MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n", -+ info->id, bw); -+ -+ if (!info->qport) { -+ MSM_BUS_DBG("No qos ports to update!\n"); -+ break; -+ } -+ -+ qbw.bw = bw + info->qos_params.bw_buffer; -+ trace_bus_bimc_config_limiter(info->id, bw); -+ -+ /* Default to gp of 5us */ -+ qbw.gp = (info->qos_params.gp ? -+ info->qos_params.gp : 5000); -+ /* Default to thmp of 50% */ -+ qbw.thmp = (info->qos_params.thmp ? -+ info->qos_params.thmp : 50); -+ /* -+ * If the BW vote is 0 then set the QoS mode to -+ * Fixed. -+ */ -+ if (bw) { -+ bimc_set_static_qos_bw(qos_base, qos_freq, -+ info->qport[i], &qbw); -+ bke_switch(qos_base, info->qport[i], -+ BKE_ON, info->qos_params.mode); -+ } else { -+ bke_switch(qos_base, info->qport[i], -+ BKE_OFF, BIMC_QOS_MODE_FIXED); -+ } -+ } -+ } -+ return ret; -+} -+ -+int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata, -+ struct msm_bus_hw_algorithm *hw_algo) -+{ -+ /* Set interleaving to true by default */ -+ MSM_BUS_DBG("\nInitializing BIMC...\n"); -+ pdata->il_flag = true; -+ hw_algo->allocate_commit_data = msm_bus_bimc_allocate_commit_data; -+ hw_algo->allocate_hw_data = msm_bus_bimc_allocate_bimc_data; -+ hw_algo->node_init = msm_bus_bimc_node_init; -+ hw_algo->free_commit_data = free_commit_data; -+ hw_algo->update_bw = msm_bus_bimc_update_bw; -+ hw_algo->commit = msm_bus_bimc_commit; -+ hw_algo->port_halt = msm_bus_bimc_port_halt; -+ hw_algo->port_unhalt = msm_bus_bimc_port_unhalt; -+ hw_algo->config_master = msm_bus_bimc_config_master; -+ hw_algo->config_limiter = msm_bus_bimc_config_limiter; -+ hw_algo->update_bw_reg = msm_bus_bimc_update_bw_reg; -+ /* BIMC slaves are shared. Slave registers are set through RPM */ -+ if (!pdata->ahb) -+ pdata->rpm_enabled = 1; -+ return 0; -+} -+ -+int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev) -+{ -+ if (!bus_dev) -+ return -ENODEV; -+ else { -+ bus_dev->fabdev->noc_ops.qos_init = msm_bus_bimc_qos_init; -+ bus_dev->fabdev->noc_ops.set_bw = msm_bus_bimc_set_bw; -+ bus_dev->fabdev->noc_ops.limit_mport = msm_bus_bimc_limit_mport; -+ bus_dev->fabdev->noc_ops.update_bw_reg = -+ msm_bus_bimc_update_bw_reg; -+ } -+ return 0; -+} -+EXPORT_SYMBOL(msm_bus_bimc_set_ops); ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_bimc.h -@@ -0,0 +1,127 @@ -+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H -+#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H -+ -+struct msm_bus_bimc_params { -+ uint32_t bus_id; -+ uint32_t addr_width; -+ uint32_t data_width; -+ uint32_t nmasters; -+ uint32_t nslaves; -+}; -+ -+struct msm_bus_bimc_commit { -+ struct msm_bus_node_hw_info *mas; -+ struct msm_bus_node_hw_info *slv; -+}; -+ -+struct msm_bus_bimc_info { -+ void __iomem *base; -+ uint32_t base_addr; -+ uint32_t qos_freq; -+ struct msm_bus_bimc_params params; -+ struct msm_bus_bimc_commit cdata[NUM_CTX]; -+}; -+ -+struct msm_bus_bimc_node { -+ uint32_t conn_mask; -+ uint32_t data_width; -+ uint8_t slv_arb_mode; -+}; -+ -+enum msm_bus_bimc_arb_mode { -+ BIMC_ARB_MODE_RR = 0, -+ BIMC_ARB_MODE_PRIORITY_RR, -+ BIMC_ARB_MODE_TIERED_RR, -+}; -+ -+ -+enum msm_bus_bimc_interleave { -+ BIMC_INTERLEAVE_NONE = 0, -+ BIMC_INTERLEAVE_ODD, -+ BIMC_INTERLEAVE_EVEN, -+}; -+ -+struct msm_bus_bimc_slave_seg { -+ bool enable; -+ uint64_t start_addr; -+ uint64_t seg_size; -+ uint8_t interleave; -+}; -+ -+enum msm_bus_bimc_qos_mode_type { -+ BIMC_QOS_MODE_FIXED = 0, -+ BIMC_QOS_MODE_LIMITER, -+ BIMC_QOS_MODE_BYPASS, -+ BIMC_QOS_MODE_REGULATOR, -+}; -+ -+struct msm_bus_bimc_qos_health { -+ bool limit_commands; -+ uint32_t areq_prio; -+ uint32_t prio_level; -+}; -+ -+struct msm_bus_bimc_mode_fixed { -+ uint32_t prio_level; -+ uint32_t areq_prio_rd; -+ uint32_t areq_prio_wr; -+}; -+ -+struct msm_bus_bimc_mode_rl { -+ uint8_t qhealthnum; -+ struct msm_bus_bimc_qos_health qhealth[4]; -+}; -+ -+struct msm_bus_bimc_qos_mode { -+ uint8_t mode; -+ struct msm_bus_bimc_mode_fixed fixed; -+ struct msm_bus_bimc_mode_rl rl; -+}; -+ -+struct msm_bus_bimc_qos_bw { -+ uint64_t bw; /* bw is in Bytes/sec */ -+ uint32_t ws; /* Window size in nano seconds*/ -+ int64_t thh; /* Threshold high, bytes per second */ -+ int64_t thm; /* Threshold medium, bytes per second */ -+ int64_t thl; /* Threshold low, bytes per second */ -+ u32 gp; /* Grant Period in micro seconds */ -+ u32 thmp; /* Threshold medium in percentage */ -+}; -+ -+struct msm_bus_bimc_clk_gate { -+ bool core_clk_gate_en; -+ bool arb_clk_gate_en; /* For arbiter */ -+ bool port_clk_gate_en; /* For regs on BIMC core clock */ -+}; -+ -+void msm_bus_bimc_set_slave_seg(struct msm_bus_bimc_info *binfo, -+ uint32_t slv_index, uint32_t seg_index, -+ struct msm_bus_bimc_slave_seg *bsseg); -+void msm_bus_bimc_set_slave_clk_gate(struct msm_bus_bimc_info *binfo, -+ uint32_t slv_index, struct msm_bus_bimc_clk_gate *bgate); -+void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo, -+ uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate); -+void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo, -+ uint32_t slv_index, bool en); -+void msm_bus_bimc_get_params(struct msm_bus_bimc_info *binfo, -+ struct msm_bus_bimc_params *params); -+void msm_bus_bimc_get_mas_params(struct msm_bus_bimc_info *binfo, -+ uint32_t mas_index, struct msm_bus_bimc_node *mparams); -+void msm_bus_bimc_get_slv_params(struct msm_bus_bimc_info *binfo, -+ uint32_t slv_index, struct msm_bus_bimc_node *sparams); -+bool msm_bus_bimc_get_arb_en(struct msm_bus_bimc_info *binfo, -+ uint32_t slv_index); -+ -+#endif /*_ARCH_ARM_MACH_MSM_BUS_BIMC_H*/ ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_client_api.c -@@ -0,0 +1,83 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "msm-bus.h" -+#include "msm_bus_core.h" -+ -+struct msm_bus_arb_ops arb_ops; -+ -+/** -+ * msm_bus_scale_register_client() - Register the clients with the msm bus -+ * driver -+ * @pdata: Platform data of the client, containing src, dest, ab, ib. -+ * Return non-zero value in case of success, 0 in case of failure. -+ * -+ * Client data contains the vectors specifying arbitrated bandwidth (ab) -+ * and instantaneous bandwidth (ib) requested between a particular -+ * src and dest. -+ */ -+uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata) -+{ -+ if (arb_ops.register_client) -+ return arb_ops.register_client(pdata); -+ else { -+ pr_err("%s: Bus driver not ready.", -+ __func__); -+ return 0; -+ } -+} -+EXPORT_SYMBOL(msm_bus_scale_register_client); -+ -+/** -+ * msm_bus_scale_client_update_request() - Update the request for bandwidth -+ * from a particular client -+ * -+ * cl: Handle to the client -+ * index: Index into the vector, to which the bw and clock values need to be -+ * updated -+ */ -+int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index) -+{ -+ if (arb_ops.update_request) -+ return arb_ops.update_request(cl, index); -+ else { -+ pr_err("%s: Bus driver not ready.", -+ __func__); -+ return -EPROBE_DEFER; -+ } -+} -+EXPORT_SYMBOL(msm_bus_scale_client_update_request); -+ -+/** -+ * msm_bus_scale_unregister_client() - Unregister the client from the bus driver -+ * @cl: Handle to the client -+ */ -+void msm_bus_scale_unregister_client(uint32_t cl) -+{ -+ if (arb_ops.unregister_client) -+ arb_ops.unregister_client(cl); -+ else { -+ pr_err("%s: Bus driver not ready.", -+ __func__); -+ } -+} -+EXPORT_SYMBOL(msm_bus_scale_unregister_client); ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_core.c -@@ -0,0 +1,125 @@ -+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "msm-bus-board.h" -+#include "msm-bus.h" -+#include "msm_bus_core.h" -+ -+static atomic_t num_fab = ATOMIC_INIT(0); -+ -+int msm_bus_get_num_fab(void) -+{ -+ return atomic_read(&num_fab); -+} -+ -+int msm_bus_device_match(struct device *dev, void *id) -+{ -+ struct msm_bus_fabric_device *fabdev = to_msm_bus_fabric_device(dev); -+ -+ if (!fabdev) { -+ MSM_BUS_WARN("Fabric %p returning 0\n", fabdev); -+ return 0; -+ } -+ return fabdev->id == *(int *)id; -+} -+ -+static void msm_bus_release(struct device *device) -+{ -+} -+ -+struct bus_type msm_bus_type = { -+ .name = "msm-bus-type", -+}; -+EXPORT_SYMBOL(msm_bus_type); -+ -+/** -+ * msm_bus_get_fabric_device() - This function is used to search for -+ * the fabric device on the bus -+ * @fabid: Fabric id -+ * Function returns: Pointer to the fabric device -+ */ -+struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid) -+{ -+ struct device *dev; -+ struct msm_bus_fabric_device *fabric; -+ dev = bus_find_device(&msm_bus_type, NULL, (void *)&fabid, -+ msm_bus_device_match); -+ if (!dev) -+ return NULL; -+ fabric = to_msm_bus_fabric_device(dev); -+ return fabric; -+} -+ -+/** -+ * msm_bus_fabric_device_register() - Registers a fabric on msm bus -+ * @fabdev: Fabric device to be registered -+ */ -+int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabdev) -+{ -+ int ret = 0; -+ fabdev->dev.bus = &msm_bus_type; -+ fabdev->dev.release = msm_bus_release; -+ ret = dev_set_name(&fabdev->dev, fabdev->name); -+ if (ret) { -+ MSM_BUS_ERR("error setting dev name\n"); -+ goto err; -+ } -+ -+ ret = device_register(&fabdev->dev); -+ if (ret < 0) { -+ MSM_BUS_ERR("error registering device%d %s\n", -+ ret, fabdev->name); -+ goto err; -+ } -+ atomic_inc(&num_fab); -+err: -+ return ret; -+} -+ -+/** -+ * msm_bus_fabric_device_unregister() - Unregisters the fabric -+ * devices from the msm bus -+ */ -+void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabdev) -+{ -+ device_unregister(&fabdev->dev); -+ atomic_dec(&num_fab); -+} -+ -+static void __exit msm_bus_exit(void) -+{ -+ bus_unregister(&msm_bus_type); -+} -+ -+static int __init msm_bus_init(void) -+{ -+ int retval = 0; -+ retval = bus_register(&msm_bus_type); -+ if (retval) -+ MSM_BUS_ERR("bus_register error! %d\n", -+ retval); -+ return retval; -+} -+postcore_initcall(msm_bus_init); -+module_exit(msm_bus_exit); -+MODULE_LICENSE("GPL v2"); -+MODULE_VERSION("0.2"); -+MODULE_ALIAS("platform:msm_bus"); ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_core.h -@@ -0,0 +1,375 @@ -+/* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef _ARCH_ARM_MACH_MSM_BUS_CORE_H -+#define _ARCH_ARM_MACH_MSM_BUS_CORE_H -+ -+#include -+#include -+#include -+#include -+#include "msm-bus-board.h" -+#include "msm-bus.h" -+ -+#define MSM_BUS_DBG(msg, ...) \ -+ pr_debug(msg, ## __VA_ARGS__) -+#define MSM_BUS_ERR(msg, ...) \ -+ pr_err(msg, ## __VA_ARGS__) -+#define MSM_BUS_WARN(msg, ...) \ -+ pr_warn(msg, ## __VA_ARGS__) -+#define MSM_FAB_ERR(msg, ...) \ -+ dev_err(&fabric->fabdev.dev, msg, ## __VA_ARGS__) -+ -+#define IS_MASTER_VALID(mas) \ -+ (((mas >= MSM_BUS_MASTER_FIRST) && (mas <= MSM_BUS_MASTER_LAST)) \ -+ ? 1 : 0) -+#define IS_SLAVE_VALID(slv) \ -+ (((slv >= MSM_BUS_SLAVE_FIRST) && (slv <= MSM_BUS_SLAVE_LAST)) ? 1 : 0) -+ -+#define INTERLEAVED_BW(fab_pdata, bw, ports) \ -+ ((fab_pdata->il_flag) ? ((bw < 0) \ -+ ? -msm_bus_div64((ports), (-bw)) : msm_bus_div64((ports), (bw))) : (bw)) -+#define INTERLEAVED_VAL(fab_pdata, n) \ -+ ((fab_pdata->il_flag) ? (n) : 1) -+#define KBTOB(a) (a * 1000ULL) -+ -+enum msm_bus_dbg_op_type { -+ MSM_BUS_DBG_UNREGISTER = -2, -+ MSM_BUS_DBG_REGISTER, -+ MSM_BUS_DBG_OP = 1, -+}; -+ -+enum msm_bus_hw_sel { -+ MSM_BUS_RPM = 0, -+ MSM_BUS_NOC, -+ MSM_BUS_BIMC, -+}; -+ -+struct msm_bus_arb_ops { -+ uint32_t (*register_client)(struct msm_bus_scale_pdata *pdata); -+ int (*update_request)(uint32_t cl, unsigned int index); -+ void (*unregister_client)(uint32_t cl); -+}; -+ -+enum { -+ SLAVE_NODE, -+ MASTER_NODE, -+ CLK_NODE, -+ NR_LIM_NODE, -+}; -+ -+ -+extern struct bus_type msm_bus_type; -+extern struct msm_bus_arb_ops arb_ops; -+extern void msm_bus_arb_setops_legacy(struct msm_bus_arb_ops *arb_ops); -+ -+struct msm_bus_node_info { -+ unsigned int id; -+ unsigned int priv_id; -+ unsigned int mas_hw_id; -+ unsigned int slv_hw_id; -+ int gateway; -+ int *masterp; -+ int *qport; -+ int num_mports; -+ int *slavep; -+ int num_sports; -+ int *tier; -+ int num_tiers; -+ int ahb; -+ int hw_sel; -+ const char *slaveclk[NUM_CTX]; -+ const char *memclk[NUM_CTX]; -+ const char *iface_clk_node; -+ unsigned int buswidth; -+ unsigned int ws; -+ unsigned int mode; -+ unsigned int perm_mode; -+ unsigned int prio_lvl; -+ unsigned int prio_rd; -+ unsigned int prio_wr; -+ unsigned int prio1; -+ unsigned int prio0; -+ unsigned int num_thresh; -+ u64 *th; -+ u64 cur_lim_bw; -+ unsigned int mode_thresh; -+ bool dual_conf; -+ u64 *bimc_bw; -+ bool nr_lim; -+ u32 ff; -+ bool rt_mas; -+ u32 bimc_gp; -+ u32 bimc_thmp; -+ u64 floor_bw; -+ const char *name; -+}; -+ -+struct path_node { -+ uint64_t clk[NUM_CTX]; -+ uint64_t bw[NUM_CTX]; -+ uint64_t *sel_clk; -+ uint64_t *sel_bw; -+ int next; -+}; -+ -+struct msm_bus_link_info { -+ uint64_t clk[NUM_CTX]; -+ uint64_t *sel_clk; -+ uint64_t memclk; -+ int64_t bw[NUM_CTX]; -+ int64_t *sel_bw; -+ int *tier; -+ int num_tiers; -+}; -+ -+struct nodeclk { -+ struct clk *clk; -+ uint64_t rate; -+ bool dirty; -+ bool enable; -+}; -+ -+struct msm_bus_inode_info { -+ struct msm_bus_node_info *node_info; -+ uint64_t max_bw; -+ uint64_t max_clk; -+ uint64_t cur_lim_bw; -+ uint64_t cur_prg_bw; -+ struct msm_bus_link_info link_info; -+ int num_pnodes; -+ struct path_node *pnode; -+ int commit_index; -+ struct nodeclk nodeclk[NUM_CTX]; -+ struct nodeclk memclk[NUM_CTX]; -+ struct nodeclk iface_clk; -+ void *hw_data; -+}; -+ -+struct msm_bus_node_hw_info { -+ bool dirty; -+ unsigned int hw_id; -+ uint64_t bw; -+}; -+ -+struct msm_bus_hw_algorithm { -+ int (*allocate_commit_data)(struct msm_bus_fabric_registration -+ *fab_pdata, void **cdata, int ctx); -+ void *(*allocate_hw_data)(struct platform_device *pdev, -+ struct msm_bus_fabric_registration *fab_pdata); -+ void (*node_init)(void *hw_data, struct msm_bus_inode_info *info); -+ void (*free_commit_data)(void *cdata); -+ void (*update_bw)(struct msm_bus_inode_info *hop, -+ struct msm_bus_inode_info *info, -+ struct msm_bus_fabric_registration *fab_pdata, -+ void *sel_cdata, int *master_tiers, -+ int64_t add_bw); -+ void (*fill_cdata_buffer)(int *curr, char *buf, const int max_size, -+ void *cdata, int nmasters, int nslaves, int ntslaves); -+ int (*commit)(struct msm_bus_fabric_registration -+ *fab_pdata, void *hw_data, void **cdata); -+ int (*port_unhalt)(uint32_t haltid, uint8_t mport); -+ int (*port_halt)(uint32_t haltid, uint8_t mport); -+ void (*config_master)(struct msm_bus_fabric_registration *fab_pdata, -+ struct msm_bus_inode_info *info, -+ uint64_t req_clk, uint64_t req_bw); -+ void (*config_limiter)(struct msm_bus_fabric_registration *fab_pdata, -+ struct msm_bus_inode_info *info); -+ bool (*update_bw_reg)(int mode); -+}; -+ -+struct msm_bus_fabric_device { -+ int id; -+ const char *name; -+ struct device dev; -+ const struct msm_bus_fab_algorithm *algo; -+ const struct msm_bus_board_algorithm *board_algo; -+ struct msm_bus_hw_algorithm hw_algo; -+ int visited; -+ int num_nr_lim; -+ u64 nr_lim_thresh; -+ u32 eff_fact; -+}; -+#define to_msm_bus_fabric_device(d) container_of(d, \ -+ struct msm_bus_fabric_device, d) -+ -+struct msm_bus_fabric { -+ struct msm_bus_fabric_device fabdev; -+ int ahb; -+ void *cdata[NUM_CTX]; -+ bool arb_dirty; -+ bool clk_dirty; -+ struct radix_tree_root fab_tree; -+ int num_nodes; -+ struct list_head gateways; -+ struct msm_bus_inode_info info; -+ struct msm_bus_fabric_registration *pdata; -+ void *hw_data; -+}; -+#define to_msm_bus_fabric(d) container_of(d, \ -+ struct msm_bus_fabric, d) -+ -+ -+struct msm_bus_fab_algorithm { -+ int (*update_clks)(struct msm_bus_fabric_device *fabdev, -+ struct msm_bus_inode_info *pme, int index, -+ uint64_t curr_clk, uint64_t req_clk, -+ uint64_t bwsum, int flag, int ctx, -+ unsigned int cl_active_flag); -+ int (*port_halt)(struct msm_bus_fabric_device *fabdev, int portid); -+ int (*port_unhalt)(struct msm_bus_fabric_device *fabdev, int portid); -+ int (*commit)(struct msm_bus_fabric_device *fabdev); -+ struct msm_bus_inode_info *(*find_node)(struct msm_bus_fabric_device -+ *fabdev, int id); -+ struct msm_bus_inode_info *(*find_gw_node)(struct msm_bus_fabric_device -+ *fabdev, int id); -+ struct list_head *(*get_gw_list)(struct msm_bus_fabric_device *fabdev); -+ void (*update_bw)(struct msm_bus_fabric_device *fabdev, struct -+ msm_bus_inode_info * hop, struct msm_bus_inode_info *info, -+ int64_t add_bw, int *master_tiers, int ctx); -+ void (*config_master)(struct msm_bus_fabric_device *fabdev, -+ struct msm_bus_inode_info *info, uint64_t req_clk, -+ uint64_t req_bw); -+ void (*config_limiter)(struct msm_bus_fabric_device *fabdev, -+ struct msm_bus_inode_info *info); -+}; -+ -+struct msm_bus_board_algorithm { -+ int board_nfab; -+ void (*assign_iids)(struct msm_bus_fabric_registration *fabreg, -+ int fabid); -+ int (*get_iid)(int id); -+}; -+ -+/** -+ * Used to store the list of fabrics and other info to be -+ * maintained outside the fabric structure. -+ * Used while calculating path, and to find fabric ptrs -+ */ -+struct msm_bus_fabnodeinfo { -+ struct list_head list; -+ struct msm_bus_inode_info *info; -+}; -+ -+struct msm_bus_client { -+ int id; -+ struct msm_bus_scale_pdata *pdata; -+ int *src_pnode; -+ int curr; -+}; -+ -+uint64_t msm_bus_div64(unsigned int width, uint64_t bw); -+int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabric); -+void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabric); -+struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid); -+int msm_bus_get_num_fab(void); -+ -+ -+int msm_bus_hw_fab_init(struct msm_bus_fabric_registration *pdata, -+ struct msm_bus_hw_algorithm *hw_algo); -+void msm_bus_board_init(struct msm_bus_fabric_registration *pdata); -+void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata, -+ int nfab); -+#if defined(CONFIG_MSM_RPM_SMD) -+int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata, -+ struct msm_bus_hw_algorithm *hw_algo); -+int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration -+ *fab_pdata, void *hw_data, void **cdata); -+void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf, const int max_size, -+ void *cdata, int nmasters, int nslaves, int ntslaves); -+#else -+static inline int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata, -+ struct msm_bus_hw_algorithm *hw_algo) -+{ -+ return 0; -+} -+static inline int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration -+ *fab_pdata, void *hw_data, void **cdata) -+{ -+ return 0; -+} -+static inline void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf, -+ const int max_size, void *cdata, int nmasters, int nslaves, -+ int ntslaves) -+{ -+} -+#endif -+ -+int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata, -+ struct msm_bus_hw_algorithm *hw_algo); -+int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata, -+ struct msm_bus_hw_algorithm *hw_algo); -+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) -+void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index, -+ uint32_t cl); -+void msm_bus_dbg_commit_data(const char *fabname, void *cdata, -+ int nmasters, int nslaves, int ntslaves, int op); -+#else -+static inline void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, -+ int index, uint32_t cl) -+{ -+} -+static inline void msm_bus_dbg_commit_data(const char *fabname, -+ void *cdata, int nmasters, int nslaves, int ntslaves, -+ int op) -+{ -+} -+#endif -+ -+#ifdef CONFIG_CORESIGHT -+int msmbus_coresight_init(struct platform_device *pdev); -+void msmbus_coresight_remove(struct platform_device *pdev); -+int msmbus_coresight_init_adhoc(struct platform_device *pdev, -+ struct device_node *of_node); -+void msmbus_coresight_remove_adhoc(struct platform_device *pdev); -+#else -+static inline int msmbus_coresight_init(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+static inline void msmbus_coresight_remove(struct platform_device *pdev) -+{ -+} -+ -+static inline int msmbus_coresight_init_adhoc(struct platform_device *pdev, -+ struct device_node *of_node) -+{ -+ return 0; -+} -+ -+static inline void msmbus_coresight_remove_adhoc(struct platform_device *pdev) -+{ -+} -+#endif -+ -+ -+#ifdef CONFIG_OF -+void msm_bus_of_get_nfab(struct platform_device *pdev, -+ struct msm_bus_fabric_registration *pdata); -+struct msm_bus_fabric_registration -+ *msm_bus_of_get_fab_data(struct platform_device *pdev); -+#else -+static inline void msm_bus_of_get_nfab(struct platform_device *pdev, -+ struct msm_bus_fabric_registration *pdata) -+{ -+ return; -+} -+ -+static inline struct msm_bus_fabric_registration -+ *msm_bus_of_get_fab_data(struct platform_device *pdev) -+{ -+ return NULL; -+} -+#endif -+ -+#endif /*_ARCH_ARM_MACH_MSM_BUS_CORE_H*/ ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_dbg.c -@@ -0,0 +1,810 @@ -+/* Copyright (c) 2010-2012, 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+ -+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "msm-bus-board.h" -+#include "msm-bus.h" -+#include "msm_bus_rules.h" -+#include "msm_bus_core.h" -+#include "msm_bus_adhoc.h" -+ -+#define CREATE_TRACE_POINTS -+#include -+ -+#define MAX_BUFF_SIZE 4096 -+#define FILL_LIMIT 128 -+ -+static struct dentry *clients; -+static struct dentry *dir; -+static DEFINE_MUTEX(msm_bus_dbg_fablist_lock); -+struct msm_bus_dbg_state { -+ uint32_t cl; -+ uint8_t enable; -+ uint8_t current_index; -+} clstate; -+ -+struct msm_bus_cldata { -+ const struct msm_bus_scale_pdata *pdata; -+ int index; -+ uint32_t clid; -+ int size; -+ struct dentry *file; -+ struct list_head list; -+ char buffer[MAX_BUFF_SIZE]; -+}; -+ -+struct msm_bus_fab_list { -+ const char *name; -+ int size; -+ struct dentry *file; -+ struct list_head list; -+ char buffer[MAX_BUFF_SIZE]; -+}; -+ -+static char *rules_buf; -+ -+LIST_HEAD(fabdata_list); -+LIST_HEAD(cl_list); -+ -+/** -+ * The following structures and funtions are used for -+ * the test-client which can be created at run-time. -+ */ -+ -+static struct msm_bus_vectors init_vectors[1]; -+static struct msm_bus_vectors current_vectors[1]; -+static struct msm_bus_vectors requested_vectors[1]; -+ -+static struct msm_bus_paths shell_client_usecases[] = { -+ { -+ .num_paths = ARRAY_SIZE(init_vectors), -+ .vectors = init_vectors, -+ }, -+ { -+ .num_paths = ARRAY_SIZE(current_vectors), -+ .vectors = current_vectors, -+ }, -+ { -+ .num_paths = ARRAY_SIZE(requested_vectors), -+ .vectors = requested_vectors, -+ }, -+}; -+ -+static struct msm_bus_scale_pdata shell_client = { -+ .usecase = shell_client_usecases, -+ .num_usecases = ARRAY_SIZE(shell_client_usecases), -+ .name = "test-client", -+}; -+ -+static void msm_bus_dbg_init_vectors(void) -+{ -+ init_vectors[0].src = -1; -+ init_vectors[0].dst = -1; -+ init_vectors[0].ab = 0; -+ init_vectors[0].ib = 0; -+ current_vectors[0].src = -1; -+ current_vectors[0].dst = -1; -+ current_vectors[0].ab = 0; -+ current_vectors[0].ib = 0; -+ requested_vectors[0].src = -1; -+ requested_vectors[0].dst = -1; -+ requested_vectors[0].ab = 0; -+ requested_vectors[0].ib = 0; -+ clstate.enable = 0; -+ clstate.current_index = 0; -+} -+ -+static int msm_bus_dbg_update_cl_request(uint32_t cl) -+{ -+ int ret = 0; -+ -+ if (clstate.current_index < 2) -+ clstate.current_index = 2; -+ else { -+ clstate.current_index = 1; -+ current_vectors[0].ab = requested_vectors[0].ab; -+ current_vectors[0].ib = requested_vectors[0].ib; -+ } -+ -+ if (clstate.enable) { -+ MSM_BUS_DBG("Updating request for shell client, index: %d\n", -+ clstate.current_index); -+ ret = msm_bus_scale_client_update_request(clstate.cl, -+ clstate.current_index); -+ } else -+ MSM_BUS_DBG("Enable bit not set. Skipping update request\n"); -+ -+ return ret; -+} -+ -+static void msm_bus_dbg_unregister_client(uint32_t cl) -+{ -+ MSM_BUS_DBG("Unregistering shell client\n"); -+ msm_bus_scale_unregister_client(clstate.cl); -+ clstate.cl = 0; -+} -+ -+static uint32_t msm_bus_dbg_register_client(void) -+{ -+ int ret = 0; -+ -+ if (init_vectors[0].src != requested_vectors[0].src) { -+ MSM_BUS_DBG("Shell client master changed. Unregistering\n"); -+ msm_bus_dbg_unregister_client(clstate.cl); -+ } -+ if (init_vectors[0].dst != requested_vectors[0].dst) { -+ MSM_BUS_DBG("Shell client slave changed. Unregistering\n"); -+ msm_bus_dbg_unregister_client(clstate.cl); -+ } -+ -+ current_vectors[0].src = init_vectors[0].src; -+ requested_vectors[0].src = init_vectors[0].src; -+ current_vectors[0].dst = init_vectors[0].dst; -+ requested_vectors[0].dst = init_vectors[0].dst; -+ -+ if (!clstate.enable) { -+ MSM_BUS_DBG("Enable bit not set, skipping registration: cl " -+ "%d\n", clstate.cl); -+ return 0; -+ } -+ -+ if (clstate.cl) { -+ MSM_BUS_DBG("Client registered, skipping registration\n"); -+ return clstate.cl; -+ } -+ -+ MSM_BUS_DBG("Registering shell client\n"); -+ ret = msm_bus_scale_register_client(&shell_client); -+ return ret; -+} -+ -+static int msm_bus_dbg_mas_get(void *data, u64 *val) -+{ -+ *val = init_vectors[0].src; -+ MSM_BUS_DBG("Get master: %llu\n", *val); -+ return 0; -+} -+ -+static int msm_bus_dbg_mas_set(void *data, u64 val) -+{ -+ init_vectors[0].src = val; -+ MSM_BUS_DBG("Set master: %llu\n", val); -+ clstate.cl = msm_bus_dbg_register_client(); -+ return 0; -+} -+DEFINE_SIMPLE_ATTRIBUTE(shell_client_mas_fops, msm_bus_dbg_mas_get, -+ msm_bus_dbg_mas_set, "%llu\n"); -+ -+static int msm_bus_dbg_slv_get(void *data, u64 *val) -+{ -+ *val = init_vectors[0].dst; -+ MSM_BUS_DBG("Get slave: %llu\n", *val); -+ return 0; -+} -+ -+static int msm_bus_dbg_slv_set(void *data, u64 val) -+{ -+ init_vectors[0].dst = val; -+ MSM_BUS_DBG("Set slave: %llu\n", val); -+ clstate.cl = msm_bus_dbg_register_client(); -+ return 0; -+} -+DEFINE_SIMPLE_ATTRIBUTE(shell_client_slv_fops, msm_bus_dbg_slv_get, -+ msm_bus_dbg_slv_set, "%llu\n"); -+ -+static int msm_bus_dbg_ab_get(void *data, u64 *val) -+{ -+ *val = requested_vectors[0].ab; -+ MSM_BUS_DBG("Get ab: %llu\n", *val); -+ return 0; -+} -+ -+static int msm_bus_dbg_ab_set(void *data, u64 val) -+{ -+ requested_vectors[0].ab = val; -+ MSM_BUS_DBG("Set ab: %llu\n", val); -+ return 0; -+} -+DEFINE_SIMPLE_ATTRIBUTE(shell_client_ab_fops, msm_bus_dbg_ab_get, -+ msm_bus_dbg_ab_set, "%llu\n"); -+ -+static int msm_bus_dbg_ib_get(void *data, u64 *val) -+{ -+ *val = requested_vectors[0].ib; -+ MSM_BUS_DBG("Get ib: %llu\n", *val); -+ return 0; -+} -+ -+static int msm_bus_dbg_ib_set(void *data, u64 val) -+{ -+ requested_vectors[0].ib = val; -+ MSM_BUS_DBG("Set ib: %llu\n", val); -+ return 0; -+} -+DEFINE_SIMPLE_ATTRIBUTE(shell_client_ib_fops, msm_bus_dbg_ib_get, -+ msm_bus_dbg_ib_set, "%llu\n"); -+ -+static int msm_bus_dbg_en_get(void *data, u64 *val) -+{ -+ *val = clstate.enable; -+ MSM_BUS_DBG("Get enable: %llu\n", *val); -+ return 0; -+} -+ -+static int msm_bus_dbg_en_set(void *data, u64 val) -+{ -+ int ret = 0; -+ -+ clstate.enable = val; -+ if (clstate.enable) { -+ if (!clstate.cl) { -+ MSM_BUS_DBG("client: %u\n", clstate.cl); -+ clstate.cl = msm_bus_dbg_register_client(); -+ if (clstate.cl) -+ ret = msm_bus_dbg_update_cl_request(clstate.cl); -+ } else { -+ MSM_BUS_DBG("update request for cl: %u\n", clstate.cl); -+ ret = msm_bus_dbg_update_cl_request(clstate.cl); -+ } -+ } -+ -+ MSM_BUS_DBG("Set enable: %llu\n", val); -+ return ret; -+} -+DEFINE_SIMPLE_ATTRIBUTE(shell_client_en_fops, msm_bus_dbg_en_get, -+ msm_bus_dbg_en_set, "%llu\n"); -+ -+/** -+ * The following funtions are used for viewing the client data -+ * and changing the client request at run-time -+ */ -+ -+static ssize_t client_data_read(struct file *file, char __user *buf, -+ size_t count, loff_t *ppos) -+{ -+ int bsize = 0; -+ uint32_t cl = (uint32_t)(uintptr_t)file->private_data; -+ struct msm_bus_cldata *cldata = NULL; -+ int found = 0; -+ -+ list_for_each_entry(cldata, &cl_list, list) { -+ if (cldata->clid == cl) { -+ found = 1; -+ break; -+ } -+ } -+ if (!found) -+ return 0; -+ -+ bsize = cldata->size; -+ return simple_read_from_buffer(buf, count, ppos, -+ cldata->buffer, bsize); -+} -+ -+static int client_data_open(struct inode *inode, struct file *file) -+{ -+ file->private_data = inode->i_private; -+ return 0; -+} -+ -+static const struct file_operations client_data_fops = { -+ .open = client_data_open, -+ .read = client_data_read, -+}; -+ -+struct dentry *msm_bus_dbg_create(const char *name, mode_t mode, -+ struct dentry *dent, uint32_t clid) -+{ -+ if (dent == NULL) { -+ MSM_BUS_DBG("debugfs not ready yet\n"); -+ return NULL; -+ } -+ return debugfs_create_file(name, mode, dent, (void *)(uintptr_t)clid, -+ &client_data_fops); -+} -+ -+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) -+static int msm_bus_dbg_record_client(const struct msm_bus_scale_pdata *pdata, -+ int index, uint32_t clid, struct dentry *file) -+{ -+ struct msm_bus_cldata *cldata; -+ -+ cldata = kmalloc(sizeof(struct msm_bus_cldata), GFP_KERNEL); -+ if (!cldata) { -+ MSM_BUS_DBG("Failed to allocate memory for client data\n"); -+ return -ENOMEM; -+ } -+ cldata->pdata = pdata; -+ cldata->index = index; -+ cldata->clid = clid; -+ cldata->file = file; -+ cldata->size = 0; -+ list_add_tail(&cldata->list, &cl_list); -+ return 0; -+} -+ -+static void msm_bus_dbg_free_client(uint32_t clid) -+{ -+ struct msm_bus_cldata *cldata = NULL; -+ -+ list_for_each_entry(cldata, &cl_list, list) { -+ if (cldata->clid == clid) { -+ debugfs_remove(cldata->file); -+ list_del(&cldata->list); -+ kfree(cldata); -+ break; -+ } -+ } -+} -+ -+static int msm_bus_dbg_fill_cl_buffer(const struct msm_bus_scale_pdata *pdata, -+ int index, uint32_t clid) -+{ -+ int i = 0, j; -+ char *buf = NULL; -+ struct msm_bus_cldata *cldata = NULL; -+ struct timespec ts; -+ int found = 0; -+ -+ list_for_each_entry(cldata, &cl_list, list) { -+ if (cldata->clid == clid) { -+ found = 1; -+ break; -+ } -+ } -+ -+ if (!found) -+ return -ENOENT; -+ -+ if (cldata->file == NULL) { -+ if (pdata->name == NULL) { -+ MSM_BUS_DBG("Client doesn't have a name\n"); -+ return -EINVAL; -+ } -+ cldata->file = msm_bus_dbg_create(pdata->name, S_IRUGO, -+ clients, clid); -+ } -+ -+ if (cldata->size < (MAX_BUFF_SIZE - FILL_LIMIT)) -+ i = cldata->size; -+ else { -+ i = 0; -+ cldata->size = 0; -+ } -+ buf = cldata->buffer; -+ ts = ktime_to_timespec(ktime_get()); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n", -+ (int)ts.tv_sec, (int)ts.tv_nsec); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "curr : %d\n", index); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "masters: "); -+ -+ for (j = 0; j < pdata->usecase->num_paths; j++) -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d ", -+ pdata->usecase[index].vectors[j].src); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nslaves : "); -+ for (j = 0; j < pdata->usecase->num_paths; j++) -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d ", -+ pdata->usecase[index].vectors[j].dst); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nab : "); -+ for (j = 0; j < pdata->usecase->num_paths; j++) -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu ", -+ pdata->usecase[index].vectors[j].ab); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nib : "); -+ for (j = 0; j < pdata->usecase->num_paths; j++) -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu ", -+ pdata->usecase[index].vectors[j].ib); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n"); -+ -+ for (j = 0; j < pdata->usecase->num_paths; j++) -+ trace_bus_update_request((int)ts.tv_sec, (int)ts.tv_nsec, -+ pdata->name, index, -+ pdata->usecase[index].vectors[j].src, -+ pdata->usecase[index].vectors[j].dst, -+ pdata->usecase[index].vectors[j].ab, -+ pdata->usecase[index].vectors[j].ib); -+ -+ cldata->size = i; -+ return i; -+} -+#endif -+ -+static int msm_bus_dbg_update_request(struct msm_bus_cldata *cldata, int index) -+{ -+ int ret = 0; -+ -+ if ((index < 0) || (index > cldata->pdata->num_usecases)) { -+ MSM_BUS_DBG("Invalid index!\n"); -+ return -EINVAL; -+ } -+ ret = msm_bus_scale_client_update_request(cldata->clid, index); -+ return ret; -+} -+ -+static ssize_t msm_bus_dbg_update_request_write(struct file *file, -+ const char __user *ubuf, size_t cnt, loff_t *ppos) -+{ -+ struct msm_bus_cldata *cldata; -+ unsigned long index = 0; -+ int ret = 0; -+ char *chid; -+ char *buf = kmalloc((sizeof(char) * (cnt + 1)), GFP_KERNEL); -+ int found = 0; -+ -+ if (!buf || IS_ERR(buf)) { -+ MSM_BUS_ERR("Memory allocation for buffer failed\n"); -+ return -ENOMEM; -+ } -+ if (cnt == 0) { -+ kfree(buf); -+ return 0; -+ } -+ if (copy_from_user(buf, ubuf, cnt)) { -+ kfree(buf); -+ return -EFAULT; -+ } -+ buf[cnt] = '\0'; -+ chid = buf; -+ MSM_BUS_DBG("buffer: %s\n size: %zu\n", buf, sizeof(ubuf)); -+ -+ list_for_each_entry(cldata, &cl_list, list) { -+ if (strnstr(chid, cldata->pdata->name, cnt)) { -+ found = 1; -+ cldata = cldata; -+ strsep(&chid, " "); -+ if (chid) { -+ ret = kstrtoul(chid, 10, &index); -+ if (ret) { -+ MSM_BUS_DBG("Index conversion" -+ " failed\n"); -+ return -EFAULT; -+ } -+ } else { -+ MSM_BUS_DBG("Error parsing input. Index not" -+ " found\n"); -+ found = 0; -+ } -+ break; -+ } -+ } -+ -+ if (found) -+ msm_bus_dbg_update_request(cldata, index); -+ kfree(buf); -+ return cnt; -+} -+ -+/** -+ * The following funtions are used for viewing the commit data -+ * for each fabric -+ */ -+static ssize_t fabric_data_read(struct file *file, char __user *buf, -+ size_t count, loff_t *ppos) -+{ -+ struct msm_bus_fab_list *fablist = NULL; -+ int bsize = 0; -+ ssize_t ret; -+ const char *name = file->private_data; -+ int found = 0; -+ -+ mutex_lock(&msm_bus_dbg_fablist_lock); -+ list_for_each_entry(fablist, &fabdata_list, list) { -+ if (strcmp(fablist->name, name) == 0) { -+ found = 1; -+ break; -+ } -+ } -+ if (!found) -+ return -ENOENT; -+ bsize = fablist->size; -+ ret = simple_read_from_buffer(buf, count, ppos, -+ fablist->buffer, bsize); -+ mutex_unlock(&msm_bus_dbg_fablist_lock); -+ return ret; -+} -+ -+static const struct file_operations fabric_data_fops = { -+ .open = client_data_open, -+ .read = fabric_data_read, -+}; -+ -+static ssize_t rules_dbg_read(struct file *file, char __user *buf, -+ size_t count, loff_t *ppos) -+{ -+ ssize_t ret; -+ memset(rules_buf, 0, MAX_BUFF_SIZE); -+ print_rules_buf(rules_buf, MAX_BUFF_SIZE); -+ ret = simple_read_from_buffer(buf, count, ppos, -+ rules_buf, MAX_BUFF_SIZE); -+ return ret; -+} -+ -+static int rules_dbg_open(struct inode *inode, struct file *file) -+{ -+ file->private_data = inode->i_private; -+ return 0; -+} -+ -+static const struct file_operations rules_dbg_fops = { -+ .open = rules_dbg_open, -+ .read = rules_dbg_read, -+}; -+ -+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) -+static int msm_bus_dbg_record_fabric(const char *fabname, struct dentry *file) -+{ -+ struct msm_bus_fab_list *fablist; -+ int ret = 0; -+ -+ mutex_lock(&msm_bus_dbg_fablist_lock); -+ fablist = kmalloc(sizeof(struct msm_bus_fab_list), GFP_KERNEL); -+ if (!fablist) { -+ MSM_BUS_DBG("Failed to allocate memory for commit data\n"); -+ ret = -ENOMEM; -+ goto err; -+ } -+ -+ fablist->name = fabname; -+ fablist->size = 0; -+ list_add_tail(&fablist->list, &fabdata_list); -+err: -+ mutex_unlock(&msm_bus_dbg_fablist_lock); -+ return ret; -+} -+ -+static void msm_bus_dbg_free_fabric(const char *fabname) -+{ -+ struct msm_bus_fab_list *fablist = NULL; -+ -+ mutex_lock(&msm_bus_dbg_fablist_lock); -+ list_for_each_entry(fablist, &fabdata_list, list) { -+ if (strcmp(fablist->name, fabname) == 0) { -+ debugfs_remove(fablist->file); -+ list_del(&fablist->list); -+ kfree(fablist); -+ break; -+ } -+ } -+ mutex_unlock(&msm_bus_dbg_fablist_lock); -+} -+ -+static int msm_bus_dbg_fill_fab_buffer(const char *fabname, -+ void *cdata, int nmasters, int nslaves, -+ int ntslaves) -+{ -+ int i; -+ char *buf = NULL; -+ struct msm_bus_fab_list *fablist = NULL; -+ struct timespec ts; -+ int found = 0; -+ -+ mutex_lock(&msm_bus_dbg_fablist_lock); -+ list_for_each_entry(fablist, &fabdata_list, list) { -+ if (strcmp(fablist->name, fabname) == 0) { -+ found = 1; -+ break; -+ } -+ } -+ if (!found) -+ return -ENOENT; -+ -+ if (fablist->file == NULL) { -+ MSM_BUS_DBG("Fabric dbg entry does not exist\n"); -+ mutex_unlock(&msm_bus_dbg_fablist_lock); -+ return -EFAULT; -+ } -+ -+ if (fablist->size < MAX_BUFF_SIZE - 256) -+ i = fablist->size; -+ else { -+ i = 0; -+ fablist->size = 0; -+ } -+ buf = fablist->buffer; -+ mutex_unlock(&msm_bus_dbg_fablist_lock); -+ ts = ktime_to_timespec(ktime_get()); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n", -+ (int)ts.tv_sec, (int)ts.tv_nsec); -+ -+ msm_bus_rpm_fill_cdata_buffer(&i, buf, MAX_BUFF_SIZE, cdata, -+ nmasters, nslaves, ntslaves); -+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n"); -+ mutex_lock(&msm_bus_dbg_fablist_lock); -+ fablist->size = i; -+ mutex_unlock(&msm_bus_dbg_fablist_lock); -+ return 0; -+} -+#endif -+ -+static const struct file_operations msm_bus_dbg_update_request_fops = { -+ .open = client_data_open, -+ .write = msm_bus_dbg_update_request_write, -+}; -+ -+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) -+/** -+ * msm_bus_dbg_client_data() - Add debug data for clients -+ * @pdata: Platform data of the client -+ * @index: The current index or operation to be performed -+ * @clid: Client handle obtained during registration -+ */ -+void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index, -+ uint32_t clid) -+{ -+ struct dentry *file = NULL; -+ -+ if (index == MSM_BUS_DBG_REGISTER) { -+ msm_bus_dbg_record_client(pdata, index, clid, file); -+ if (!pdata->name) { -+ MSM_BUS_DBG("Cannot create debugfs entry. Null name\n"); -+ return; -+ } -+ } else if (index == MSM_BUS_DBG_UNREGISTER) { -+ msm_bus_dbg_free_client(clid); -+ MSM_BUS_DBG("Client %d unregistered\n", clid); -+ } else -+ msm_bus_dbg_fill_cl_buffer(pdata, index, clid); -+} -+EXPORT_SYMBOL(msm_bus_dbg_client_data); -+ -+/** -+ * msm_bus_dbg_commit_data() - Add commit data from fabrics -+ * @fabname: Fabric name specified in platform data -+ * @cdata: Commit Data -+ * @nmasters: Number of masters attached to fabric -+ * @nslaves: Number of slaves attached to fabric -+ * @ntslaves: Number of tiered slaves attached to fabric -+ * @op: Operation to be performed -+ */ -+void msm_bus_dbg_commit_data(const char *fabname, void *cdata, -+ int nmasters, int nslaves, int ntslaves, int op) -+{ -+ struct dentry *file = NULL; -+ -+ if (op == MSM_BUS_DBG_REGISTER) -+ msm_bus_dbg_record_fabric(fabname, file); -+ else if (op == MSM_BUS_DBG_UNREGISTER) -+ msm_bus_dbg_free_fabric(fabname); -+ else -+ msm_bus_dbg_fill_fab_buffer(fabname, cdata, nmasters, -+ nslaves, ntslaves); -+} -+EXPORT_SYMBOL(msm_bus_dbg_commit_data); -+#endif -+ -+static int __init msm_bus_debugfs_init(void) -+{ -+ struct dentry *commit, *shell_client, *rules_dbg; -+ struct msm_bus_fab_list *fablist; -+ struct msm_bus_cldata *cldata = NULL; -+ uint64_t val = 0; -+ -+ dir = debugfs_create_dir("msm-bus-dbg", NULL); -+ if ((!dir) || IS_ERR(dir)) { -+ MSM_BUS_ERR("Couldn't create msm-bus-dbg\n"); -+ goto err; -+ } -+ -+ clients = debugfs_create_dir("client-data", dir); -+ if ((!dir) || IS_ERR(dir)) { -+ MSM_BUS_ERR("Couldn't create clients\n"); -+ goto err; -+ } -+ -+ shell_client = debugfs_create_dir("shell-client", dir); -+ if ((!dir) || IS_ERR(dir)) { -+ MSM_BUS_ERR("Couldn't create clients\n"); -+ goto err; -+ } -+ -+ commit = debugfs_create_dir("commit-data", dir); -+ if ((!dir) || IS_ERR(dir)) { -+ MSM_BUS_ERR("Couldn't create commit\n"); -+ goto err; -+ } -+ -+ rules_dbg = debugfs_create_dir("rules-dbg", dir); -+ if ((!rules_dbg) || IS_ERR(rules_dbg)) { -+ MSM_BUS_ERR("Couldn't create rules-dbg\n"); -+ goto err; -+ } -+ -+ if (debugfs_create_file("print_rules", S_IRUGO | S_IWUSR, -+ rules_dbg, &val, &rules_dbg_fops) == NULL) -+ goto err; -+ -+ if (debugfs_create_file("update_request", S_IRUGO | S_IWUSR, -+ shell_client, &val, &shell_client_en_fops) == NULL) -+ goto err; -+ if (debugfs_create_file("ib", S_IRUGO | S_IWUSR, shell_client, &val, -+ &shell_client_ib_fops) == NULL) -+ goto err; -+ if (debugfs_create_file("ab", S_IRUGO | S_IWUSR, shell_client, &val, -+ &shell_client_ab_fops) == NULL) -+ goto err; -+ if (debugfs_create_file("slv", S_IRUGO | S_IWUSR, shell_client, -+ &val, &shell_client_slv_fops) == NULL) -+ goto err; -+ if (debugfs_create_file("mas", S_IRUGO | S_IWUSR, shell_client, -+ &val, &shell_client_mas_fops) == NULL) -+ goto err; -+ if (debugfs_create_file("update-request", S_IRUGO | S_IWUSR, -+ clients, NULL, &msm_bus_dbg_update_request_fops) == NULL) -+ goto err; -+ -+ rules_buf = kzalloc(MAX_BUFF_SIZE, GFP_KERNEL); -+ if (!rules_buf) { -+ MSM_BUS_ERR("Failed to alloc rules_buf"); -+ goto err; -+ } -+ -+ list_for_each_entry(cldata, &cl_list, list) { -+ if (cldata->pdata->name == NULL) { -+ MSM_BUS_DBG("Client name not found\n"); -+ continue; -+ } -+ cldata->file = msm_bus_dbg_create(cldata-> -+ pdata->name, S_IRUGO, clients, cldata->clid); -+ } -+ -+ mutex_lock(&msm_bus_dbg_fablist_lock); -+ list_for_each_entry(fablist, &fabdata_list, list) { -+ fablist->file = debugfs_create_file(fablist->name, S_IRUGO, -+ commit, (void *)fablist->name, &fabric_data_fops); -+ if (fablist->file == NULL) { -+ MSM_BUS_DBG("Cannot create files for commit data\n"); -+ kfree(rules_buf); -+ goto err; -+ } -+ } -+ mutex_unlock(&msm_bus_dbg_fablist_lock); -+ -+ msm_bus_dbg_init_vectors(); -+ return 0; -+err: -+ debugfs_remove_recursive(dir); -+ return -ENODEV; -+} -+late_initcall(msm_bus_debugfs_init); -+ -+static void __exit msm_bus_dbg_teardown(void) -+{ -+ struct msm_bus_fab_list *fablist = NULL, *fablist_temp; -+ struct msm_bus_cldata *cldata = NULL, *cldata_temp; -+ -+ debugfs_remove_recursive(dir); -+ list_for_each_entry_safe(cldata, cldata_temp, &cl_list, list) { -+ list_del(&cldata->list); -+ kfree(cldata); -+ } -+ mutex_lock(&msm_bus_dbg_fablist_lock); -+ list_for_each_entry_safe(fablist, fablist_temp, &fabdata_list, list) { -+ list_del(&fablist->list); -+ kfree(fablist); -+ } -+ kfree(rules_buf); -+ mutex_unlock(&msm_bus_dbg_fablist_lock); -+} -+module_exit(msm_bus_dbg_teardown); -+MODULE_DESCRIPTION("Debugfs for msm bus scaling client"); -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Gagan Mac "); ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_fabric_adhoc.c -@@ -0,0 +1,1281 @@ -+/* Copyright (c) 2014, Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "rpm-smd.h" -+#include "msm_bus_core.h" -+#include "msm_bus_adhoc.h" -+#include "msm_bus_noc.h" -+#include "msm_bus_bimc.h" -+ -+ssize_t vrail_show(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct msm_bus_node_info_type *node_info = NULL; -+ struct msm_bus_node_device_type *bus_node = NULL; -+ -+ bus_node = dev->platform_data; -+ if (!bus_node) -+ return -EINVAL; -+ node_info = bus_node->node_info; -+ -+ return snprintf(buf, PAGE_SIZE, "%u", node_info->vrail_comp); -+} -+ -+ssize_t vrail_store(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct msm_bus_node_info_type *node_info = NULL; -+ struct msm_bus_node_device_type *bus_node = NULL; -+ int ret = 0; -+ -+ bus_node = dev->platform_data; -+ if (!bus_node) -+ return -EINVAL; -+ node_info = bus_node->node_info; -+ -+ ret = sscanf(buf, "%u", &node_info->vrail_comp); -+ if (ret != 1) -+ return -EINVAL; -+ return count; -+} -+ -+DEVICE_ATTR(vrail, 0600, vrail_show, vrail_store); -+ -+struct static_rules_type { -+ int num_rules; -+ struct bus_rule_type *rules; -+}; -+ -+static struct static_rules_type static_rules; -+ -+static int enable_nodeclk(struct nodeclk *nclk) -+{ -+ int ret = 0; -+ -+ if (!nclk->enable) { -+ ret = clk_prepare_enable(nclk->clk); -+ -+ if (ret) { -+ MSM_BUS_ERR("%s: failed to enable clk ", __func__); -+ nclk->enable = false; -+ } else -+ nclk->enable = true; -+ } -+ return ret; -+} -+ -+static int disable_nodeclk(struct nodeclk *nclk) -+{ -+ int ret = 0; -+ -+ if (nclk->enable) { -+ clk_disable_unprepare(nclk->clk); -+ nclk->enable = false; -+ } -+ return ret; -+} -+ -+static int setrate_nodeclk(struct nodeclk *nclk, long rate) -+{ -+ int ret = 0; -+ -+ ret = clk_set_rate(nclk->clk, rate); -+ -+ if (ret) -+ MSM_BUS_ERR("%s: failed to setrate clk", __func__); -+ return ret; -+} -+ -+static int msm_bus_agg_fab_clks(struct device *bus_dev, void *data) -+{ -+ struct msm_bus_node_device_type *node = NULL; -+ int ret = 0; -+ int ctx = *(int *)data; -+ -+ if (ctx >= NUM_CTX) { -+ MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx); -+ goto exit_agg_fab_clks; -+ } -+ -+ node = bus_dev->platform_data; -+ if (!node) { -+ MSM_BUS_ERR("%s: Can't get device info", __func__); -+ goto exit_agg_fab_clks; -+ } -+ -+ if (!node->node_info->is_fab_dev) { -+ struct msm_bus_node_device_type *bus_dev = NULL; -+ -+ bus_dev = node->node_info->bus_device->platform_data; -+ -+ if (node->cur_clk_hz[ctx] >= bus_dev->cur_clk_hz[ctx]) -+ bus_dev->cur_clk_hz[ctx] = node->cur_clk_hz[ctx]; -+ } -+ -+exit_agg_fab_clks: -+ return ret; -+} -+ -+static int msm_bus_reset_fab_clks(struct device *bus_dev, void *data) -+{ -+ struct msm_bus_node_device_type *node = NULL; -+ int ret = 0; -+ int ctx = *(int *)data; -+ -+ if (ctx >= NUM_CTX) { -+ MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx); -+ goto exit_reset_fab_clks; -+ } -+ -+ node = bus_dev->platform_data; -+ if (!node) { -+ MSM_BUS_ERR("%s: Can't get device info", __func__); -+ goto exit_reset_fab_clks; -+ } -+ -+ if (node->node_info->is_fab_dev) { -+ node->cur_clk_hz[ctx] = 0; -+ MSM_BUS_DBG("Resetting for node %d", node->node_info->id); -+ } -+exit_reset_fab_clks: -+ return ret; -+} -+ -+ -+static int send_rpm_msg(struct device *device) -+{ -+ int ret = 0; -+ int ctx; -+ int rsc_type; -+ struct msm_bus_node_device_type *ndev = -+ device->platform_data; -+ struct msm_rpm_kvp rpm_kvp; -+ -+ if (!ndev) { -+ MSM_BUS_ERR("%s: Error getting node info.", __func__); -+ ret = -ENODEV; -+ goto exit_send_rpm_msg; -+ } -+ -+ rpm_kvp.length = sizeof(uint64_t); -+ rpm_kvp.key = RPM_MASTER_FIELD_BW; -+ -+ for (ctx = MSM_RPM_CTX_ACTIVE_SET; ctx <= MSM_RPM_CTX_SLEEP_SET; -+ ctx++) { -+ if (ctx == MSM_RPM_CTX_ACTIVE_SET) -+ rpm_kvp.data = -+ (uint8_t *)&ndev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET]; -+ else { -+ rpm_kvp.data = -+ (uint8_t *) &ndev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET]; -+ } -+ -+ if (ndev->node_info->mas_rpm_id != -1) { -+ rsc_type = RPM_BUS_MASTER_REQ; -+ ret = msm_rpm_send_message(ctx, rsc_type, -+ ndev->node_info->mas_rpm_id, &rpm_kvp, 1); -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to send RPM message:", -+ __func__); -+ MSM_BUS_ERR("%s:Node Id %d RPM id %d", -+ __func__, ndev->node_info->id, -+ ndev->node_info->mas_rpm_id); -+ goto exit_send_rpm_msg; -+ } -+ } -+ -+ if (ndev->node_info->slv_rpm_id != -1) { -+ rsc_type = RPM_BUS_SLAVE_REQ; -+ ret = msm_rpm_send_message(ctx, rsc_type, -+ ndev->node_info->slv_rpm_id, &rpm_kvp, 1); -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to send RPM message:", -+ __func__); -+ MSM_BUS_ERR("%s: Node Id %d RPM id %d", -+ __func__, ndev->node_info->id, -+ ndev->node_info->slv_rpm_id); -+ goto exit_send_rpm_msg; -+ } -+ } -+ } -+exit_send_rpm_msg: -+ return ret; -+} -+ -+static int flush_bw_data(struct device *node_device, int ctx) -+{ -+ struct msm_bus_node_device_type *node_info; -+ int ret = 0; -+ -+ node_info = node_device->platform_data; -+ if (!node_info) { -+ MSM_BUS_ERR("%s: Unable to find bus device for device", -+ __func__); -+ ret = -ENODEV; -+ goto exit_flush_bw_data; -+ } -+ -+ if (node_info->node_ab.dirty) { -+ if (node_info->ap_owned) { -+ struct msm_bus_node_device_type *bus_device = -+ node_info->node_info->bus_device->platform_data; -+ struct msm_bus_fab_device_type *fabdev = -+ bus_device->fabdev; -+ -+ if (fabdev && fabdev->noc_ops.update_bw_reg && -+ fabdev->noc_ops.update_bw_reg -+ (node_info->node_info->qos_params.mode)) -+ ret = fabdev->noc_ops.set_bw(node_info, -+ fabdev->qos_base, -+ fabdev->base_offset, -+ fabdev->qos_off, -+ fabdev->qos_freq); -+ } else { -+ ret = send_rpm_msg(node_device); -+ -+ if (ret) -+ MSM_BUS_ERR("%s: Failed to send RPM msg for%d", -+ __func__, node_info->node_info->id); -+ } -+ node_info->node_ab.dirty = false; -+ } -+ -+exit_flush_bw_data: -+ return ret; -+ -+} -+ -+static int flush_clk_data(struct device *node_device, int ctx) -+{ -+ struct msm_bus_node_device_type *node; -+ struct nodeclk *nodeclk = NULL; -+ int ret = 0; -+ -+ node = node_device->platform_data; -+ if (!node) { -+ MSM_BUS_ERR("Unable to find bus device"); -+ ret = -ENODEV; -+ goto exit_flush_clk_data; -+ } -+ -+ nodeclk = &node->clk[ctx]; -+ if (node->node_info->is_fab_dev) { -+ if (nodeclk->rate != node->cur_clk_hz[ctx]) { -+ nodeclk->rate = node->cur_clk_hz[ctx]; -+ nodeclk->dirty = true; -+ } -+ } -+ -+ if (nodeclk && nodeclk->clk && nodeclk->dirty) { -+ long rounded_rate; -+ -+ if (nodeclk->rate) { -+ rounded_rate = clk_round_rate(nodeclk->clk, -+ nodeclk->rate); -+ ret = setrate_nodeclk(nodeclk, rounded_rate); -+ -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to set_rate %lu for %d", -+ __func__, rounded_rate, -+ node->node_info->id); -+ ret = -ENODEV; -+ goto exit_flush_clk_data; -+ } -+ -+ ret = enable_nodeclk(nodeclk); -+ } else -+ ret = disable_nodeclk(nodeclk); -+ -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to enable for %d", __func__, -+ node->node_info->id); -+ ret = -ENODEV; -+ goto exit_flush_clk_data; -+ } -+ MSM_BUS_DBG("%s: Updated %d clk to %llu", __func__, -+ node->node_info->id, nodeclk->rate); -+ -+ } -+exit_flush_clk_data: -+ /* Reset the aggregated clock rate for fab devices*/ -+ if (node && node->node_info->is_fab_dev) -+ node->cur_clk_hz[ctx] = 0; -+ -+ if (nodeclk) -+ nodeclk->dirty = 0; -+ return ret; -+} -+ -+int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty) -+{ -+ int ret = 0; -+ int i = 0; -+ -+ /* Aggregate the bus clocks */ -+ bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx, -+ msm_bus_agg_fab_clks); -+ -+ for (i = 0; i < num_dirty; i++) { -+ struct device *node_device = -+ bus_find_device(&msm_bus_type, NULL, -+ (void *)&dirty_nodes[i], -+ msm_bus_device_match_adhoc); -+ -+ if (!node_device) { -+ MSM_BUS_ERR("Can't find device for %d", dirty_nodes[i]); -+ continue; -+ } -+ -+ ret = flush_bw_data(node_device, ctx); -+ if (ret) -+ MSM_BUS_ERR("%s: Error flushing bw data for node %d", -+ __func__, dirty_nodes[i]); -+ -+ ret = flush_clk_data(node_device, ctx); -+ if (ret) -+ MSM_BUS_ERR("%s: Error flushing clk data for node %d", -+ __func__, dirty_nodes[i]); -+ } -+ kfree(dirty_nodes); -+ /* Aggregate the bus clocks */ -+ bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx, -+ msm_bus_reset_fab_clks); -+ return ret; -+} -+ -+void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size, -+ size_t new_size, gfp_t flags) -+{ -+ void *ret; -+ size_t copy_size = old_size; -+ -+ if (!new_size) { -+ devm_kfree(dev, p); -+ return ZERO_SIZE_PTR; -+ } -+ -+ if (new_size < old_size) -+ copy_size = new_size; -+ -+ ret = devm_kzalloc(dev, new_size, flags); -+ if (!ret) { -+ MSM_BUS_ERR("%s: Error Reallocating memory", __func__); -+ goto exit_realloc_devmem; -+ } -+ -+ memcpy(ret, p, copy_size); -+ devm_kfree(dev, p); -+exit_realloc_devmem: -+ return ret; -+} -+ -+ -+static int add_dirty_node(int **dirty_nodes, int id, int *num_dirty) -+{ -+ int i; -+ int found = 0; -+ int ret = 0; -+ int *dnode = NULL; -+ -+ for (i = 0; i < *num_dirty; i++) { -+ if ((*dirty_nodes)[i] == id) { -+ found = 1; -+ break; -+ } -+ } -+ -+ if (!found) { -+ (*num_dirty)++; -+ dnode = -+ krealloc(*dirty_nodes, sizeof(int) * (*num_dirty), -+ GFP_KERNEL); -+ -+ if (ZERO_OR_NULL_PTR(dnode)) { -+ MSM_BUS_ERR("%s: Failure allocating dirty nodes array", -+ __func__); -+ ret = -ENOMEM; -+ } else { -+ *dirty_nodes = dnode; -+ (*dirty_nodes)[(*num_dirty) - 1] = id; -+ } -+ } -+ -+ return ret; -+} -+ -+int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx, -+ int64_t add_bw, int **dirty_nodes, int *num_dirty) -+{ -+ int ret = 0; -+ int i, j; -+ uint64_t cur_ab_slp = 0; -+ uint64_t cur_ab_act = 0; -+ -+ if (nodedev->node_info->virt_dev) -+ goto exit_update_bw; -+ -+ for (i = 0; i < NUM_CTX; i++) { -+ for (j = 0; j < nodedev->num_lnodes; j++) { -+ if (i == DUAL_CTX) { -+ cur_ab_act += -+ nodedev->lnode_list[j].lnode_ab[i]; -+ cur_ab_slp += -+ nodedev->lnode_list[j].lnode_ab[i]; -+ } else -+ cur_ab_act += -+ nodedev->lnode_list[j].lnode_ab[i]; -+ } -+ } -+ -+ if (nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] != cur_ab_act) { -+ nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] = cur_ab_act; -+ nodedev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET] = cur_ab_slp; -+ nodedev->node_ab.dirty = true; -+ ret = add_dirty_node(dirty_nodes, nodedev->node_info->id, -+ num_dirty); -+ -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__, -+ nodedev->node_info->id); -+ goto exit_update_bw; -+ } -+ } -+ -+exit_update_bw: -+ return ret; -+} -+ -+int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev, -+ int ctx, int **dirty_nodes, int *num_dirty) -+{ -+ int status = 0; -+ struct nodeclk *nodeclk; -+ struct nodeclk *busclk; -+ struct msm_bus_node_device_type *bus_info = NULL; -+ uint64_t req_clk; -+ -+ bus_info = nodedev->node_info->bus_device->platform_data; -+ -+ if (!bus_info) { -+ MSM_BUS_ERR("%s: Unable to find bus device for device %d", -+ __func__, nodedev->node_info->id); -+ status = -ENODEV; -+ goto exit_set_clks; -+ } -+ -+ req_clk = nodedev->cur_clk_hz[ctx]; -+ busclk = &bus_info->clk[ctx]; -+ -+ if (busclk->rate != req_clk) { -+ busclk->rate = req_clk; -+ busclk->dirty = 1; -+ MSM_BUS_DBG("%s: Modifying bus clk %d Rate %llu", __func__, -+ bus_info->node_info->id, req_clk); -+ status = add_dirty_node(dirty_nodes, bus_info->node_info->id, -+ num_dirty); -+ -+ if (status) { -+ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__, -+ bus_info->node_info->id); -+ goto exit_set_clks; -+ } -+ } -+ -+ req_clk = nodedev->cur_clk_hz[ctx]; -+ nodeclk = &nodedev->clk[ctx]; -+ -+ if (IS_ERR_OR_NULL(nodeclk)) -+ goto exit_set_clks; -+ -+ if (!nodeclk->dirty || (nodeclk->dirty && (nodeclk->rate < req_clk))) { -+ nodeclk->rate = req_clk; -+ nodeclk->dirty = 1; -+ MSM_BUS_DBG("%s: Modifying node clk %d Rate %llu", __func__, -+ nodedev->node_info->id, req_clk); -+ status = add_dirty_node(dirty_nodes, nodedev->node_info->id, -+ num_dirty); -+ if (status) { -+ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__, -+ nodedev->node_info->id); -+ goto exit_set_clks; -+ } -+ } -+ -+exit_set_clks: -+ return status; -+} -+ -+static void msm_bus_fab_init_noc_ops(struct msm_bus_node_device_type *bus_dev) -+{ -+ switch (bus_dev->fabdev->bus_type) { -+ case MSM_BUS_NOC: -+ msm_bus_noc_set_ops(bus_dev); -+ break; -+ case MSM_BUS_BIMC: -+ msm_bus_bimc_set_ops(bus_dev); -+ break; -+ default: -+ MSM_BUS_ERR("%s: Invalid Bus type", __func__); -+ } -+} -+ -+static int msm_bus_qos_disable_clk(struct msm_bus_node_device_type *node, -+ int disable_bus_qos_clk) -+{ -+ struct msm_bus_node_device_type *bus_node = NULL; -+ int ret = 0; -+ -+ if (!node) { -+ ret = -ENXIO; -+ goto exit_disable_qos_clk; -+ } -+ -+ bus_node = node->node_info->bus_device->platform_data; -+ -+ if (!bus_node) { -+ ret = -ENXIO; -+ goto exit_disable_qos_clk; -+ } -+ -+ if (disable_bus_qos_clk) -+ ret = disable_nodeclk(&bus_node->clk[DUAL_CTX]); -+ -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to disable bus clk, node %d", -+ __func__, node->node_info->id); -+ goto exit_disable_qos_clk; -+ } -+ -+ if (!IS_ERR_OR_NULL(node->qos_clk.clk)) { -+ ret = disable_nodeclk(&node->qos_clk); -+ -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to disable mas qos clk,node %d", -+ __func__, node->node_info->id); -+ goto exit_disable_qos_clk; -+ } -+ } -+ -+exit_disable_qos_clk: -+ return ret; -+} -+ -+static int msm_bus_qos_enable_clk(struct msm_bus_node_device_type *node) -+{ -+ struct msm_bus_node_device_type *bus_node = NULL; -+ long rounded_rate; -+ int ret = 0; -+ int bus_qos_enabled = 0; -+ -+ if (!node) { -+ ret = -ENXIO; -+ goto exit_enable_qos_clk; -+ } -+ -+ bus_node = node->node_info->bus_device->platform_data; -+ -+ if (!bus_node) { -+ ret = -ENXIO; -+ goto exit_enable_qos_clk; -+ } -+ -+ /* Check if the bus clk is already set before trying to set it -+ * Do this only during -+ * a. Bootup -+ * b. Only for bus clks -+ **/ -+ if (!clk_get_rate(bus_node->clk[DUAL_CTX].clk)) { -+ rounded_rate = clk_round_rate(bus_node->clk[DUAL_CTX].clk, 1); -+ ret = setrate_nodeclk(&bus_node->clk[DUAL_CTX], rounded_rate); -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to set bus clk, node %d", -+ __func__, node->node_info->id); -+ goto exit_enable_qos_clk; -+ } -+ -+ ret = enable_nodeclk(&bus_node->clk[DUAL_CTX]); -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to enable bus clk, node %d", -+ __func__, node->node_info->id); -+ goto exit_enable_qos_clk; -+ } -+ bus_qos_enabled = 1; -+ } -+ -+ if (!IS_ERR_OR_NULL(node->qos_clk.clk)) { -+ rounded_rate = clk_round_rate(node->qos_clk.clk, 1); -+ ret = setrate_nodeclk(&node->qos_clk, rounded_rate); -+ if (ret) { -+ MSM_BUS_ERR("%s: Failed to enable mas qos clk, node %d", -+ __func__, node->node_info->id); -+ goto exit_enable_qos_clk; -+ } -+ -+ ret = enable_nodeclk(&node->qos_clk); -+ if (ret) { -+ MSM_BUS_ERR("Err enable mas qos clk, node %d ret %d", -+ node->node_info->id, ret); -+ goto exit_enable_qos_clk; -+ } -+ } -+ ret = bus_qos_enabled; -+ -+exit_enable_qos_clk: -+ return ret; -+} -+ -+int msm_bus_enable_limiter(struct msm_bus_node_device_type *node_dev, -+ bool enable, uint64_t lim_bw) -+{ -+ int ret = 0; -+ struct msm_bus_node_device_type *bus_node_dev; -+ -+ if (!node_dev) { -+ MSM_BUS_ERR("No device specified"); -+ ret = -ENXIO; -+ goto exit_enable_limiter; -+ } -+ -+ if (!node_dev->ap_owned) { -+ MSM_BUS_ERR("Device is not AP owned %d.", -+ node_dev->node_info->id); -+ ret = -ENXIO; -+ goto exit_enable_limiter; -+ } -+ -+ bus_node_dev = node_dev->node_info->bus_device->platform_data; -+ if (!bus_node_dev) { -+ MSM_BUS_ERR("Unable to get bus device infofor %d", -+ node_dev->node_info->id); -+ ret = -ENXIO; -+ goto exit_enable_limiter; -+ } -+ if (bus_node_dev->fabdev && -+ bus_node_dev->fabdev->noc_ops.limit_mport) { -+ ret = msm_bus_qos_enable_clk(node_dev); -+ if (ret < 0) { -+ MSM_BUS_ERR("Can't Enable QoS clk %d", -+ node_dev->node_info->id); -+ goto exit_enable_limiter; -+ } -+ bus_node_dev->fabdev->noc_ops.limit_mport( -+ node_dev, -+ bus_node_dev->fabdev->qos_base, -+ bus_node_dev->fabdev->base_offset, -+ bus_node_dev->fabdev->qos_off, -+ bus_node_dev->fabdev->qos_freq, -+ enable, lim_bw); -+ msm_bus_qos_disable_clk(node_dev, ret); -+ } -+ -+exit_enable_limiter: -+ return ret; -+} -+ -+static int msm_bus_dev_init_qos(struct device *dev, void *data) -+{ -+ int ret = 0; -+ struct msm_bus_node_device_type *node_dev = NULL; -+ -+ node_dev = dev->platform_data; -+ -+ if (!node_dev) { -+ MSM_BUS_ERR("%s: Unable to get node device info" , __func__); -+ ret = -ENXIO; -+ goto exit_init_qos; -+ } -+ -+ MSM_BUS_DBG("Device = %d", node_dev->node_info->id); -+ -+ if (node_dev->ap_owned) { -+ struct msm_bus_node_device_type *bus_node_info; -+ -+ bus_node_info = node_dev->node_info->bus_device->platform_data; -+ -+ if (!bus_node_info) { -+ MSM_BUS_ERR("%s: Unable to get bus device infofor %d", -+ __func__, -+ node_dev->node_info->id); -+ ret = -ENXIO; -+ goto exit_init_qos; -+ } -+ -+ if (bus_node_info->fabdev && -+ bus_node_info->fabdev->noc_ops.qos_init) { -+ int ret = 0; -+ -+ if (node_dev->ap_owned && -+ (node_dev->node_info->qos_params.mode) != -1) { -+ -+ if (bus_node_info->fabdev->bypass_qos_prg) -+ goto exit_init_qos; -+ -+ ret = msm_bus_qos_enable_clk(node_dev); -+ if (ret < 0) { -+ MSM_BUS_ERR("Can't Enable QoS clk %d", -+ node_dev->node_info->id); -+ goto exit_init_qos; -+ } -+ -+ bus_node_info->fabdev->noc_ops.qos_init( -+ node_dev, -+ bus_node_info->fabdev->qos_base, -+ bus_node_info->fabdev->base_offset, -+ bus_node_info->fabdev->qos_off, -+ bus_node_info->fabdev->qos_freq); -+ msm_bus_qos_disable_clk(node_dev, ret); -+ } -+ } else -+ MSM_BUS_ERR("%s: Skipping QOS init for %d", -+ __func__, node_dev->node_info->id); -+ } -+exit_init_qos: -+ return ret; -+} -+ -+static int msm_bus_fabric_init(struct device *dev, -+ struct msm_bus_node_device_type *pdata) -+{ -+ struct msm_bus_fab_device_type *fabdev; -+ struct msm_bus_node_device_type *node_dev = NULL; -+ int ret = 0; -+ -+ node_dev = dev->platform_data; -+ if (!node_dev) { -+ MSM_BUS_ERR("%s: Unable to get bus device info" , __func__); -+ ret = -ENXIO; -+ goto exit_fabric_init; -+ } -+ -+ if (node_dev->node_info->virt_dev) { -+ MSM_BUS_ERR("%s: Skip Fab init for virtual device %d", __func__, -+ node_dev->node_info->id); -+ goto exit_fabric_init; -+ } -+ -+ fabdev = devm_kzalloc(dev, sizeof(struct msm_bus_fab_device_type), -+ GFP_KERNEL); -+ if (!fabdev) { -+ MSM_BUS_ERR("Fabric alloc failed\n"); -+ ret = -ENOMEM; -+ goto exit_fabric_init; -+ } -+ -+ node_dev->fabdev = fabdev; -+ fabdev->pqos_base = pdata->fabdev->pqos_base; -+ fabdev->qos_range = pdata->fabdev->qos_range; -+ fabdev->base_offset = pdata->fabdev->base_offset; -+ fabdev->qos_off = pdata->fabdev->qos_off; -+ fabdev->qos_freq = pdata->fabdev->qos_freq; -+ fabdev->bus_type = pdata->fabdev->bus_type; -+ fabdev->bypass_qos_prg = pdata->fabdev->bypass_qos_prg; -+ fabdev->util_fact = pdata->fabdev->util_fact; -+ fabdev->vrail_comp = pdata->fabdev->vrail_comp; -+ msm_bus_fab_init_noc_ops(node_dev); -+ -+ fabdev->qos_base = devm_ioremap(dev, -+ fabdev->pqos_base, fabdev->qos_range); -+ if (!fabdev->qos_base) { -+ MSM_BUS_ERR("%s: Error remapping address 0x%zx :bus device %d", -+ __func__, -+ (size_t)fabdev->pqos_base, node_dev->node_info->id); -+ ret = -ENOMEM; -+ goto exit_fabric_init; -+ } -+ -+ /*if (msmbus_coresight_init(pdev)) -+ pr_warn("Coresight support absent for bus: %d\n", pdata->id);*/ -+exit_fabric_init: -+ return ret; -+} -+ -+static int msm_bus_init_clk(struct device *bus_dev, -+ struct msm_bus_node_device_type *pdata) -+{ -+ unsigned int ctx; -+ int ret = 0; -+ struct msm_bus_node_device_type *node_dev = bus_dev->platform_data; -+ -+ for (ctx = 0; ctx < NUM_CTX; ctx++) { -+ if (!IS_ERR_OR_NULL(pdata->clk[ctx].clk)) { -+ node_dev->clk[ctx].clk = pdata->clk[ctx].clk; -+ node_dev->clk[ctx].enable = false; -+ node_dev->clk[ctx].dirty = false; -+ MSM_BUS_ERR("%s: Valid node clk node %d ctx %d", -+ __func__, node_dev->node_info->id, ctx); -+ } -+ } -+ -+ if (!IS_ERR_OR_NULL(pdata->qos_clk.clk)) { -+ node_dev->qos_clk.clk = pdata->qos_clk.clk; -+ node_dev->qos_clk.enable = false; -+ MSM_BUS_ERR("%s: Valid Iface clk node %d", __func__, -+ node_dev->node_info->id); -+ } -+ -+ return ret; -+} -+ -+static int msm_bus_copy_node_info(struct msm_bus_node_device_type *pdata, -+ struct device *bus_dev) -+{ -+ int ret = 0; -+ struct msm_bus_node_info_type *node_info = NULL; -+ struct msm_bus_node_info_type *pdata_node_info = NULL; -+ struct msm_bus_node_device_type *bus_node = NULL; -+ -+ bus_node = bus_dev->platform_data; -+ -+ if (!bus_node || !pdata) { -+ ret = -ENXIO; -+ MSM_BUS_ERR("%s: Invalid pointers pdata %p, bus_node %p", -+ __func__, pdata, bus_node); -+ goto exit_copy_node_info; -+ } -+ -+ node_info = bus_node->node_info; -+ pdata_node_info = pdata->node_info; -+ -+ node_info->name = pdata_node_info->name; -+ node_info->id = pdata_node_info->id; -+ node_info->bus_device_id = pdata_node_info->bus_device_id; -+ node_info->mas_rpm_id = pdata_node_info->mas_rpm_id; -+ node_info->slv_rpm_id = pdata_node_info->slv_rpm_id; -+ node_info->num_connections = pdata_node_info->num_connections; -+ node_info->num_blist = pdata_node_info->num_blist; -+ node_info->num_qports = pdata_node_info->num_qports; -+ node_info->buswidth = pdata_node_info->buswidth; -+ node_info->virt_dev = pdata_node_info->virt_dev; -+ node_info->is_fab_dev = pdata_node_info->is_fab_dev; -+ node_info->qos_params.mode = pdata_node_info->qos_params.mode; -+ node_info->qos_params.prio1 = pdata_node_info->qos_params.prio1; -+ node_info->qos_params.prio0 = pdata_node_info->qos_params.prio0; -+ node_info->qos_params.prio_lvl = pdata_node_info->qos_params.prio_lvl; -+ node_info->qos_params.prio_rd = pdata_node_info->qos_params.prio_rd; -+ node_info->qos_params.prio_wr = pdata_node_info->qos_params.prio_wr; -+ node_info->qos_params.gp = pdata_node_info->qos_params.gp; -+ node_info->qos_params.thmp = pdata_node_info->qos_params.thmp; -+ node_info->qos_params.ws = pdata_node_info->qos_params.ws; -+ node_info->qos_params.bw_buffer = pdata_node_info->qos_params.bw_buffer; -+ node_info->util_fact = pdata_node_info->util_fact; -+ node_info->vrail_comp = pdata_node_info->vrail_comp; -+ -+ node_info->dev_connections = devm_kzalloc(bus_dev, -+ sizeof(struct device *) * -+ pdata_node_info->num_connections, -+ GFP_KERNEL); -+ if (!node_info->dev_connections) { -+ MSM_BUS_ERR("%s:Bus dev connections alloc failed\n", __func__); -+ ret = -ENOMEM; -+ goto exit_copy_node_info; -+ } -+ -+ node_info->connections = devm_kzalloc(bus_dev, -+ sizeof(int) * pdata_node_info->num_connections, -+ GFP_KERNEL); -+ if (!node_info->connections) { -+ MSM_BUS_ERR("%s:Bus connections alloc failed\n", __func__); -+ devm_kfree(bus_dev, node_info->dev_connections); -+ ret = -ENOMEM; -+ goto exit_copy_node_info; -+ } -+ -+ memcpy(node_info->connections, -+ pdata_node_info->connections, -+ sizeof(int) * pdata_node_info->num_connections); -+ -+ node_info->black_connections = devm_kzalloc(bus_dev, -+ sizeof(struct device *) * -+ pdata_node_info->num_blist, -+ GFP_KERNEL); -+ if (!node_info->black_connections) { -+ MSM_BUS_ERR("%s: Bus black connections alloc failed\n", -+ __func__); -+ devm_kfree(bus_dev, node_info->dev_connections); -+ devm_kfree(bus_dev, node_info->connections); -+ ret = -ENOMEM; -+ goto exit_copy_node_info; -+ } -+ -+ node_info->black_listed_connections = devm_kzalloc(bus_dev, -+ pdata_node_info->num_blist * sizeof(int), -+ GFP_KERNEL); -+ if (!node_info->black_listed_connections) { -+ MSM_BUS_ERR("%s:Bus black list connections alloc failed\n", -+ __func__); -+ devm_kfree(bus_dev, node_info->black_connections); -+ devm_kfree(bus_dev, node_info->dev_connections); -+ devm_kfree(bus_dev, node_info->connections); -+ ret = -ENOMEM; -+ goto exit_copy_node_info; -+ } -+ -+ memcpy(node_info->black_listed_connections, -+ pdata_node_info->black_listed_connections, -+ sizeof(int) * pdata_node_info->num_blist); -+ -+ node_info->qport = devm_kzalloc(bus_dev, -+ sizeof(int) * pdata_node_info->num_qports, -+ GFP_KERNEL); -+ if (!node_info->qport) { -+ MSM_BUS_ERR("%s:Bus qport allocation failed\n", __func__); -+ devm_kfree(bus_dev, node_info->dev_connections); -+ devm_kfree(bus_dev, node_info->connections); -+ devm_kfree(bus_dev, node_info->black_listed_connections); -+ ret = -ENOMEM; -+ goto exit_copy_node_info; -+ } -+ -+ memcpy(node_info->qport, -+ pdata_node_info->qport, -+ sizeof(int) * pdata_node_info->num_qports); -+ -+exit_copy_node_info: -+ return ret; -+} -+ -+static struct device *msm_bus_device_init( -+ struct msm_bus_node_device_type *pdata) -+{ -+ struct device *bus_dev = NULL; -+ struct msm_bus_node_device_type *bus_node = NULL; -+ struct msm_bus_node_info_type *node_info = NULL; -+ int ret = 0; -+ -+ bus_dev = kzalloc(sizeof(struct device), GFP_KERNEL); -+ if (!bus_dev) { -+ MSM_BUS_ERR("%s:Device alloc failed\n", __func__); -+ bus_dev = NULL; -+ goto exit_device_init; -+ } -+ /** -+ * Init here so we can use devm calls -+ */ -+ device_initialize(bus_dev); -+ -+ bus_node = devm_kzalloc(bus_dev, -+ sizeof(struct msm_bus_node_device_type), GFP_KERNEL); -+ if (!bus_node) { -+ MSM_BUS_ERR("%s:Bus node alloc failed\n", __func__); -+ kfree(bus_dev); -+ bus_dev = NULL; -+ goto exit_device_init; -+ } -+ -+ node_info = devm_kzalloc(bus_dev, -+ sizeof(struct msm_bus_node_info_type), GFP_KERNEL); -+ if (!node_info) { -+ MSM_BUS_ERR("%s:Bus node info alloc failed\n", __func__); -+ devm_kfree(bus_dev, bus_node); -+ kfree(bus_dev); -+ bus_dev = NULL; -+ goto exit_device_init; -+ } -+ -+ bus_node->node_info = node_info; -+ bus_node->ap_owned = pdata->ap_owned; -+ bus_dev->platform_data = bus_node; -+ -+ if (msm_bus_copy_node_info(pdata, bus_dev) < 0) { -+ devm_kfree(bus_dev, bus_node); -+ devm_kfree(bus_dev, node_info); -+ kfree(bus_dev); -+ bus_dev = NULL; -+ goto exit_device_init; -+ } -+ -+ bus_dev->bus = &msm_bus_type; -+ dev_set_name(bus_dev, bus_node->node_info->name); -+ -+ ret = device_add(bus_dev); -+ if (ret < 0) { -+ MSM_BUS_ERR("%s: Error registering device %d", -+ __func__, pdata->node_info->id); -+ devm_kfree(bus_dev, bus_node); -+ devm_kfree(bus_dev, node_info->dev_connections); -+ devm_kfree(bus_dev, node_info->connections); -+ devm_kfree(bus_dev, node_info->black_connections); -+ devm_kfree(bus_dev, node_info->black_listed_connections); -+ devm_kfree(bus_dev, node_info); -+ kfree(bus_dev); -+ bus_dev = NULL; -+ goto exit_device_init; -+ } -+ device_create_file(bus_dev, &dev_attr_vrail); -+ -+exit_device_init: -+ return bus_dev; -+} -+ -+static int msm_bus_setup_dev_conn(struct device *bus_dev, void *data) -+{ -+ struct msm_bus_node_device_type *bus_node = NULL; -+ int ret = 0; -+ int j; -+ -+ bus_node = bus_dev->platform_data; -+ if (!bus_node) { -+ MSM_BUS_ERR("%s: Can't get device info", __func__); -+ ret = -ENODEV; -+ goto exit_setup_dev_conn; -+ } -+ -+ /* Setup parent bus device for this node */ -+ if (!bus_node->node_info->is_fab_dev) { -+ struct device *bus_parent_device = -+ bus_find_device(&msm_bus_type, NULL, -+ (void *)&bus_node->node_info->bus_device_id, -+ msm_bus_device_match_adhoc); -+ -+ if (!bus_parent_device) { -+ MSM_BUS_ERR("%s: Error finding parentdev %d parent %d", -+ __func__, -+ bus_node->node_info->id, -+ bus_node->node_info->bus_device_id); -+ ret = -ENXIO; -+ goto exit_setup_dev_conn; -+ } -+ bus_node->node_info->bus_device = bus_parent_device; -+ } -+ -+ bus_node->node_info->is_traversed = false; -+ -+ for (j = 0; j < bus_node->node_info->num_connections; j++) { -+ bus_node->node_info->dev_connections[j] = -+ bus_find_device(&msm_bus_type, NULL, -+ (void *)&bus_node->node_info->connections[j], -+ msm_bus_device_match_adhoc); -+ -+ if (!bus_node->node_info->dev_connections[j]) { -+ MSM_BUS_ERR("%s: Error finding conn %d for device %d", -+ __func__, bus_node->node_info->connections[j], -+ bus_node->node_info->id); -+ ret = -ENODEV; -+ goto exit_setup_dev_conn; -+ } -+ } -+ -+ for (j = 0; j < bus_node->node_info->num_blist; j++) { -+ bus_node->node_info->black_connections[j] = -+ bus_find_device(&msm_bus_type, NULL, -+ (void *)&bus_node->node_info-> -+ black_listed_connections[j], -+ msm_bus_device_match_adhoc); -+ -+ if (!bus_node->node_info->black_connections[j]) { -+ MSM_BUS_ERR("%s: Error finding conn %d for device %d\n", -+ __func__, bus_node->node_info-> -+ black_listed_connections[j], -+ bus_node->node_info->id); -+ ret = -ENODEV; -+ goto exit_setup_dev_conn; -+ } -+ } -+ -+exit_setup_dev_conn: -+ return ret; -+} -+ -+static int msm_bus_node_debug(struct device *bus_dev, void *data) -+{ -+ int j; -+ int ret = 0; -+ struct msm_bus_node_device_type *bus_node = NULL; -+ -+ bus_node = bus_dev->platform_data; -+ if (!bus_node) { -+ MSM_BUS_ERR("%s: Can't get device info", __func__); -+ ret = -ENODEV; -+ goto exit_node_debug; -+ } -+ -+ MSM_BUS_DBG("Device = %d buswidth %u", bus_node->node_info->id, -+ bus_node->node_info->buswidth); -+ for (j = 0; j < bus_node->node_info->num_connections; j++) { -+ struct msm_bus_node_device_type *bdev = -+ (struct msm_bus_node_device_type *) -+ bus_node->node_info->dev_connections[j]->platform_data; -+ MSM_BUS_DBG("\n\t Connection[%d] %d", j, bdev->node_info->id); -+ } -+ -+exit_node_debug: -+ return ret; -+} -+ -+static int msm_bus_device_probe(struct platform_device *pdev) -+{ -+ unsigned int i, ret; -+ struct msm_bus_device_node_registration *pdata; -+ -+ /* If possible, get pdata from device-tree */ -+ if (pdev->dev.of_node) -+ pdata = msm_bus_of_to_pdata(pdev); -+ else { -+ pdata = (struct msm_bus_device_node_registration *)pdev-> -+ dev.platform_data; -+ } -+ -+ if (IS_ERR_OR_NULL(pdata)) { -+ MSM_BUS_ERR("No platform data found"); -+ ret = -ENODATA; -+ goto exit_device_probe; -+ } -+ -+ for (i = 0; i < pdata->num_devices; i++) { -+ struct device *node_dev = NULL; -+ -+ node_dev = msm_bus_device_init(&pdata->info[i]); -+ -+ if (!node_dev) { -+ MSM_BUS_ERR("%s: Error during dev init for %d", -+ __func__, pdata->info[i].node_info->id); -+ ret = -ENXIO; -+ goto exit_device_probe; -+ } -+ -+ ret = msm_bus_init_clk(node_dev, &pdata->info[i]); -+ /*Is this a fabric device ?*/ -+ if (pdata->info[i].node_info->is_fab_dev) { -+ MSM_BUS_DBG("%s: %d is a fab", __func__, -+ pdata->info[i].node_info->id); -+ ret = msm_bus_fabric_init(node_dev, &pdata->info[i]); -+ if (ret) { -+ MSM_BUS_ERR("%s: Error intializing fab %d", -+ __func__, pdata->info[i].node_info->id); -+ goto exit_device_probe; -+ } -+ } -+ } -+ -+ ret = bus_for_each_dev(&msm_bus_type, NULL, NULL, -+ msm_bus_setup_dev_conn); -+ if (ret) { -+ MSM_BUS_ERR("%s: Error setting up dev connections", __func__); -+ goto exit_device_probe; -+ } -+ -+ ret = bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_dev_init_qos); -+ if (ret) { -+ MSM_BUS_ERR("%s: Error during qos init", __func__); -+ goto exit_device_probe; -+ } -+ -+ bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_node_debug); -+ -+ /* Register the arb layer ops */ -+ msm_bus_arb_setops_adhoc(&arb_ops); -+ devm_kfree(&pdev->dev, pdata->info); -+ devm_kfree(&pdev->dev, pdata); -+exit_device_probe: -+ return ret; -+} -+ -+static int msm_bus_device_rules_probe(struct platform_device *pdev) -+{ -+ struct bus_rule_type *rule_data = NULL; -+ int num_rules = 0; -+ -+ num_rules = msm_bus_of_get_static_rules(pdev, &rule_data); -+ -+ if (!rule_data) -+ goto exit_rules_probe; -+ -+ msm_rule_register(num_rules, rule_data, NULL); -+ static_rules.num_rules = num_rules; -+ static_rules.rules = rule_data; -+ pdev->dev.platform_data = &static_rules; -+ -+exit_rules_probe: -+ return 0; -+} -+ -+int msm_bus_device_rules_remove(struct platform_device *pdev) -+{ -+ struct static_rules_type *static_rules = NULL; -+ -+ static_rules = pdev->dev.platform_data; -+ if (static_rules) -+ msm_rule_unregister(static_rules->num_rules, -+ static_rules->rules, NULL); -+ return 0; -+} -+ -+static int msm_bus_free_dev(struct device *dev, void *data) -+{ -+ struct msm_bus_node_device_type *bus_node = NULL; -+ -+ bus_node = dev->platform_data; -+ -+ if (bus_node) -+ MSM_BUS_ERR("\n%s: Removing device %d", __func__, -+ bus_node->node_info->id); -+ device_unregister(dev); -+ return 0; -+} -+ -+int msm_bus_device_remove(struct platform_device *pdev) -+{ -+ bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_free_dev); -+ return 0; -+} -+ -+static struct of_device_id rules_match[] = { -+ {.compatible = "qcom,msm-bus-static-bw-rules"}, -+ {} -+}; -+ -+static struct platform_driver msm_bus_rules_driver = { -+ .probe = msm_bus_device_rules_probe, -+ .remove = msm_bus_device_rules_remove, -+ .driver = { -+ .name = "msm_bus_rules_device", -+ .owner = THIS_MODULE, -+ .of_match_table = rules_match, -+ }, -+}; -+ -+static struct of_device_id fabric_match[] = { -+ {.compatible = "qcom,msm-bus-device"}, -+ {} -+}; -+ -+static struct platform_driver msm_bus_device_driver = { -+ .probe = msm_bus_device_probe, -+ .remove = msm_bus_device_remove, -+ .driver = { -+ .name = "msm_bus_device", -+ .owner = THIS_MODULE, -+ .of_match_table = fabric_match, -+ }, -+}; -+ -+int __init msm_bus_device_init_driver(void) -+{ -+ int rc; -+ -+ MSM_BUS_ERR("msm_bus_fabric_init_driver\n"); -+ rc = platform_driver_register(&msm_bus_device_driver); -+ -+ if (rc) { -+ MSM_BUS_ERR("Failed to register bus device driver"); -+ return rc; -+ } -+ return platform_driver_register(&msm_bus_rules_driver); -+} -+subsys_initcall(msm_bus_device_init_driver); ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_id.c -@@ -0,0 +1,94 @@ -+/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include "msm-bus.h" -+#include "msm-bus-board.h" -+#include "msm_bus_core.h" -+#include "msm_bus_noc.h" -+#include "msm_bus_bimc.h" -+ -+static uint32_t master_iids[MSM_BUS_MASTER_LAST]; -+static uint32_t slave_iids[MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY]; -+ -+static void msm_bus_assign_iids(struct msm_bus_fabric_registration -+ *fabreg, int fabid) -+{ -+ int i; -+ for (i = 0; i < fabreg->len; i++) { -+ if (!fabreg->info[i].gateway) { -+ fabreg->info[i].priv_id = fabid + fabreg->info[i].id; -+ if (fabreg->info[i].id < SLAVE_ID_KEY) { -+ if (fabreg->info[i].id >= MSM_BUS_MASTER_LAST) { -+ WARN(1, "id %d exceeds array size!\n", -+ fabreg->info[i].id); -+ continue; -+ } -+ -+ master_iids[fabreg->info[i].id] = -+ fabreg->info[i].priv_id; -+ } else { -+ if ((fabreg->info[i].id - SLAVE_ID_KEY) >= -+ (MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY)) { -+ WARN(1, "id %d exceeds array size!\n", -+ fabreg->info[i].id); -+ continue; -+ } -+ -+ slave_iids[fabreg->info[i].id - (SLAVE_ID_KEY)] -+ = fabreg->info[i].priv_id; -+ } -+ } else { -+ fabreg->info[i].priv_id = fabreg->info[i].id; -+ } -+ } -+} -+ -+static int msm_bus_get_iid(int id) -+{ -+ if ((id < SLAVE_ID_KEY && id >= MSM_BUS_MASTER_LAST) || -+ id >= MSM_BUS_SLAVE_LAST) { -+ MSM_BUS_ERR("Cannot get iid. Invalid id %d passed\n", id); -+ return -EINVAL; -+ } -+ -+ return CHECK_ID(((id < SLAVE_ID_KEY) ? master_iids[id] : -+ slave_iids[id - SLAVE_ID_KEY]), id); -+} -+ -+static struct msm_bus_board_algorithm msm_bus_id_algo = { -+ .get_iid = msm_bus_get_iid, -+ .assign_iids = msm_bus_assign_iids, -+}; -+ -+int msm_bus_board_rpm_get_il_ids(uint16_t *id) -+{ -+ return -ENXIO; -+} -+ -+void msm_bus_board_init(struct msm_bus_fabric_registration *pdata) -+{ -+ pdata->board_algo = &msm_bus_id_algo; -+} -+ -+void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata, -+ int nfab) -+{ -+ if (nfab <= 0) -+ return; -+ -+ msm_bus_id_algo.board_nfab = nfab; -+} ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_noc.c -@@ -0,0 +1,770 @@ -+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#define pr_fmt(fmt) "AXI: NOC: %s(): " fmt, __func__ -+ -+#include -+#include -+#include "msm-bus-board.h" -+#include "msm_bus_core.h" -+#include "msm_bus_noc.h" -+#include "msm_bus_adhoc.h" -+ -+/* NOC_QOS generic */ -+#define __CLZ(x) ((8 * sizeof(uint32_t)) - 1 - __fls(x)) -+#define SAT_SCALE 16 /* 16 bytes minimum for saturation */ -+#define BW_SCALE 256 /* 1/256 byte per cycle unit */ -+#define QOS_DEFAULT_BASEOFFSET 0x00003000 -+#define QOS_DEFAULT_DELTA 0x80 -+#define MAX_BW_FIELD (NOC_QOS_BWn_BW_BMSK >> NOC_QOS_BWn_BW_SHFT) -+#define MAX_SAT_FIELD (NOC_QOS_SATn_SAT_BMSK >> NOC_QOS_SATn_SAT_SHFT) -+ -+#define NOC_QOS_REG_BASE(b, o) ((b) + (o)) -+ -+#define NOC_QOS_ID_COREIDn_ADDR(b, o, n, d) \ -+ (NOC_QOS_REG_BASE(b, o) + (d) * (n)) -+enum noc_qos_id_coreidn { -+ NOC_QOS_ID_COREIDn_RMSK = 0xffffffff, -+ NOC_QOS_ID_COREIDn_MAXn = 32, -+ NOC_QOS_ID_COREIDn_CORECHSUM_BMSK = 0xffffff00, -+ NOC_QOS_ID_COREIDn_CORECHSUM_SHFT = 0x8, -+ NOC_QOS_ID_COREIDn_CORETYPEID_BMSK = 0xff, -+ NOC_QOS_ID_COREIDn_CORETYPEID_SHFT = 0x0, -+}; -+ -+#define NOC_QOS_ID_REVISIONIDn_ADDR(b, o, n, d) \ -+ (NOC_QOS_REG_BASE(b, o) + 0x4 + (d) * (n)) -+enum noc_qos_id_revisionidn { -+ NOC_QOS_ID_REVISIONIDn_RMSK = 0xffffffff, -+ NOC_QOS_ID_REVISIONIDn_MAXn = 32, -+ NOC_QOS_ID_REVISIONIDn_FLEXNOCID_BMSK = 0xffffff00, -+ NOC_QOS_ID_REVISIONIDn_FLEXNOCID_SHFT = 0x8, -+ NOC_QOS_ID_REVISIONIDn_USERID_BMSK = 0xff, -+ NOC_QOS_ID_REVISIONIDn_USERID_SHFT = 0x0, -+}; -+ -+#define NOC_QOS_PRIORITYn_ADDR(b, o, n, d) \ -+ (NOC_QOS_REG_BASE(b, o) + 0x8 + (d) * (n)) -+enum noc_qos_id_priorityn { -+ NOC_QOS_PRIORITYn_RMSK = 0x0000000f, -+ NOC_QOS_PRIORITYn_MAXn = 32, -+ NOC_QOS_PRIORITYn_P1_BMSK = 0xc, -+ NOC_QOS_PRIORITYn_P1_SHFT = 0x2, -+ NOC_QOS_PRIORITYn_P0_BMSK = 0x3, -+ NOC_QOS_PRIORITYn_P0_SHFT = 0x0, -+}; -+ -+#define NOC_QOS_MODEn_ADDR(b, o, n, d) \ -+ (NOC_QOS_REG_BASE(b, o) + 0xC + (d) * (n)) -+enum noc_qos_id_moden_rmsk { -+ NOC_QOS_MODEn_RMSK = 0x00000003, -+ NOC_QOS_MODEn_MAXn = 32, -+ NOC_QOS_MODEn_MODE_BMSK = 0x3, -+ NOC_QOS_MODEn_MODE_SHFT = 0x0, -+}; -+ -+#define NOC_QOS_BWn_ADDR(b, o, n, d) \ -+ (NOC_QOS_REG_BASE(b, o) + 0x10 + (d) * (n)) -+enum noc_qos_id_bwn { -+ NOC_QOS_BWn_RMSK = 0x0000ffff, -+ NOC_QOS_BWn_MAXn = 32, -+ NOC_QOS_BWn_BW_BMSK = 0xffff, -+ NOC_QOS_BWn_BW_SHFT = 0x0, -+}; -+ -+/* QOS Saturation registers */ -+#define NOC_QOS_SATn_ADDR(b, o, n, d) \ -+ (NOC_QOS_REG_BASE(b, o) + 0x14 + (d) * (n)) -+enum noc_qos_id_saturationn { -+ NOC_QOS_SATn_RMSK = 0x000003ff, -+ NOC_QOS_SATn_MAXn = 32, -+ NOC_QOS_SATn_SAT_BMSK = 0x3ff, -+ NOC_QOS_SATn_SAT_SHFT = 0x0, -+}; -+ -+static int noc_div(uint64_t *a, uint32_t b) -+{ -+ if ((*a > 0) && (*a < b)) -+ return 1; -+ else -+ return do_div(*a, b); -+} -+ -+/** -+ * Calculates bw hardware is using from register values -+ * bw returned is in bytes/sec -+ */ -+static uint64_t noc_bw(uint32_t bw_field, uint32_t qos_freq) -+{ -+ uint64_t res; -+ uint32_t rem, scale; -+ -+ res = 2 * qos_freq * bw_field; -+ scale = BW_SCALE * 1000; -+ rem = noc_div(&res, scale); -+ MSM_BUS_DBG("NOC: Calculated bw: %llu\n", res * 1000000ULL); -+ return res * 1000000ULL; -+} -+ -+static uint32_t noc_bw_ceil(long int bw_field, uint32_t qos_freq) -+{ -+ uint64_t bw_temp = 2 * qos_freq * bw_field; -+ uint32_t scale = 1000 * BW_SCALE; -+ noc_div(&bw_temp, scale); -+ return bw_temp * 1000000; -+} -+#define MAX_BW(timebase) noc_bw_ceil(MAX_BW_FIELD, (timebase)) -+ -+/** -+ * Calculates ws hardware is using from register values -+ * ws returned is in nanoseconds -+ */ -+static uint32_t noc_ws(uint64_t bw, uint32_t sat, uint32_t qos_freq) -+{ -+ if (bw && qos_freq) { -+ uint32_t bwf = bw * qos_freq; -+ uint64_t scale = 1000000000000LL * BW_SCALE * -+ SAT_SCALE * sat; -+ noc_div(&scale, bwf); -+ MSM_BUS_DBG("NOC: Calculated ws: %llu\n", scale); -+ return scale; -+ } -+ -+ return 0; -+} -+#define MAX_WS(bw, timebase) noc_ws((bw), MAX_SAT_FIELD, (timebase)) -+ -+/* Calculate bandwidth field value for requested bandwidth */ -+static uint32_t noc_bw_field(uint64_t bw, uint32_t qos_freq) -+{ -+ uint32_t bw_field = 0; -+ -+ if (bw) { -+ uint32_t rem; -+ uint64_t bw_capped = min_t(uint64_t, bw, MAX_BW(qos_freq)); -+ uint64_t bwc = bw_capped * BW_SCALE; -+ uint64_t qf = 2 * qos_freq * 1000; -+ -+ rem = noc_div(&bwc, qf); -+ bw_field = (uint32_t)min_t(uint64_t, bwc, MAX_BW_FIELD); -+ } -+ -+ MSM_BUS_DBG("NOC: bw_field: %u\n", bw_field); -+ return bw_field; -+} -+ -+static uint32_t noc_sat_field(uint64_t bw, uint32_t ws, uint32_t qos_freq) -+{ -+ uint32_t sat_field = 0, win; -+ -+ if (bw) { -+ /* Limit to max bw and scale bw to 100 KB increments */ -+ uint64_t tbw, tscale; -+ uint64_t bw_scaled = min_t(uint64_t, bw, MAX_BW(qos_freq)); -+ uint32_t rem = noc_div(&bw_scaled, 100000); -+ -+ /** -+ * Calculate saturation from windows size. -+ * WS must be at least one arb period. -+ * Saturation must not exceed max field size -+ * -+ * Bandwidth is in 100KB increments -+ * Window size is in ns -+ * qos_freq is in KHz -+ */ -+ win = max(ws, 1000000 / qos_freq); -+ tbw = bw_scaled * win * qos_freq; -+ tscale = 10000000ULL * BW_SCALE * SAT_SCALE; -+ rem = noc_div(&tbw, tscale); -+ sat_field = (uint32_t)min_t(uint64_t, tbw, MAX_SAT_FIELD); -+ } -+ -+ MSM_BUS_DBG("NOC: sat_field: %d\n", sat_field); -+ return sat_field; -+} -+ -+static void noc_set_qos_mode(void __iomem *base, uint32_t qos_off, -+ uint32_t mport, uint32_t qos_delta, uint8_t mode, -+ uint8_t perm_mode) -+{ -+ if (mode < NOC_QOS_MODE_MAX && -+ ((1 << mode) & perm_mode)) { -+ uint32_t reg_val; -+ -+ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off, -+ mport, qos_delta)) & NOC_QOS_MODEn_RMSK; -+ writel_relaxed(((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) | -+ (mode & NOC_QOS_MODEn_MODE_BMSK)), -+ NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta)); -+ } -+ /* Ensure qos mode is set before exiting */ -+ wmb(); -+} -+ -+static void noc_set_qos_priority(void __iomem *base, uint32_t qos_off, -+ uint32_t mport, uint32_t qos_delta, -+ struct msm_bus_noc_qos_priority *priority) -+{ -+ uint32_t reg_val, val; -+ -+ reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, -+ qos_delta)) & NOC_QOS_PRIORITYn_RMSK; -+ val = priority->p1 << NOC_QOS_PRIORITYn_P1_SHFT; -+ writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P1_BMSK))) | -+ (val & NOC_QOS_PRIORITYn_P1_BMSK)), -+ NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta)); -+ -+ reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, -+ qos_delta)) -+ & NOC_QOS_PRIORITYn_RMSK; -+ writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P0_BMSK))) | -+ (priority->p0 & NOC_QOS_PRIORITYn_P0_BMSK)), -+ NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta)); -+ /* Ensure qos priority is set before exiting */ -+ wmb(); -+} -+ -+static void msm_bus_noc_set_qos_bw(void __iomem *base, uint32_t qos_off, -+ uint32_t qos_freq, uint32_t mport, uint32_t qos_delta, -+ uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw) -+{ -+ uint32_t reg_val, val, mode; -+ -+ if (!qos_freq) { -+ MSM_BUS_DBG("Zero QoS Freq\n"); -+ return; -+ } -+ -+ -+ /* If Limiter or Regulator modes are not supported, bw not available*/ -+ if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER | -+ NOC_QOS_PERM_MODE_REGULATOR)) { -+ uint32_t bw_val = noc_bw_field(qbw->bw, qos_freq); -+ uint32_t sat_val = noc_sat_field(qbw->bw, qbw->ws, -+ qos_freq); -+ -+ MSM_BUS_DBG("NOC: BW: perm_mode: %d bw_val: %d, sat_val: %d\n", -+ perm_mode, bw_val, sat_val); -+ /* -+ * If in Limiter/Regulator mode, first go to fixed mode. -+ * Clear QoS accumulator -+ **/ -+ mode = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off, -+ mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK; -+ if (mode == NOC_QOS_MODE_REGULATOR || mode == -+ NOC_QOS_MODE_LIMITER) { -+ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR( -+ base, qos_off, mport, qos_delta)); -+ val = NOC_QOS_MODE_FIXED; -+ writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) -+ | (val & NOC_QOS_MODEn_MODE_BMSK), -+ NOC_QOS_MODEn_ADDR(base, qos_off, mport, -+ qos_delta)); -+ } -+ -+ reg_val = readl_relaxed(NOC_QOS_BWn_ADDR(base, qos_off, mport, -+ qos_delta)); -+ val = bw_val << NOC_QOS_BWn_BW_SHFT; -+ writel_relaxed(((reg_val & (~(NOC_QOS_BWn_BW_BMSK))) | -+ (val & NOC_QOS_BWn_BW_BMSK)), -+ NOC_QOS_BWn_ADDR(base, qos_off, mport, qos_delta)); -+ -+ MSM_BUS_DBG("NOC: BW: Wrote value: 0x%x\n", ((reg_val & -+ (~NOC_QOS_BWn_BW_BMSK)) | (val & -+ NOC_QOS_BWn_BW_BMSK))); -+ -+ reg_val = readl_relaxed(NOC_QOS_SATn_ADDR(base, qos_off, -+ mport, qos_delta)); -+ val = sat_val << NOC_QOS_SATn_SAT_SHFT; -+ writel_relaxed(((reg_val & (~(NOC_QOS_SATn_SAT_BMSK))) | -+ (val & NOC_QOS_SATn_SAT_BMSK)), -+ NOC_QOS_SATn_ADDR(base, qos_off, mport, qos_delta)); -+ -+ MSM_BUS_DBG("NOC: SAT: Wrote value: 0x%x\n", ((reg_val & -+ (~NOC_QOS_SATn_SAT_BMSK)) | (val & -+ NOC_QOS_SATn_SAT_BMSK))); -+ -+ /* Set mode back to what it was initially */ -+ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off, -+ mport, qos_delta)); -+ writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) -+ | (mode & NOC_QOS_MODEn_MODE_BMSK), -+ NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta)); -+ /* Ensure that all writes for bandwidth registers have -+ * completed before returning -+ */ -+ wmb(); -+ } -+} -+ -+uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off, -+ uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode) -+{ -+ if (NOC_QOS_MODES_ALL_PERM == perm_mode) -+ return readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off, -+ mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK; -+ else -+ return 31 - __CLZ(mode & -+ NOC_QOS_MODES_ALL_PERM); -+} -+ -+void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off, -+ uint32_t mport, uint32_t qos_delta, -+ struct msm_bus_noc_qos_priority *priority) -+{ -+ priority->p1 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, -+ mport, qos_delta)) & NOC_QOS_PRIORITYn_P1_BMSK) >> -+ NOC_QOS_PRIORITYn_P1_SHFT; -+ -+ priority->p0 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, -+ mport, qos_delta)) & NOC_QOS_PRIORITYn_P0_BMSK) >> -+ NOC_QOS_PRIORITYn_P0_SHFT; -+} -+ -+void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off, -+ uint32_t qos_freq, -+ uint32_t mport, uint32_t qos_delta, uint8_t perm_mode, -+ struct msm_bus_noc_qos_bw *qbw) -+{ -+ if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER | -+ NOC_QOS_PERM_MODE_REGULATOR)) { -+ uint32_t bw_val = readl_relaxed(NOC_QOS_BWn_ADDR( -+ base, qos_off, mport, qos_delta)) & NOC_QOS_BWn_BW_BMSK; -+ uint32_t sat = readl_relaxed(NOC_QOS_SATn_ADDR( -+ base, qos_off, mport, qos_delta)) -+ & NOC_QOS_SATn_SAT_BMSK; -+ -+ qbw->bw = noc_bw(bw_val, qos_freq); -+ qbw->ws = noc_ws(qbw->bw, sat, qos_freq); -+ } else { -+ qbw->bw = 0; -+ qbw->ws = 0; -+ } -+} -+ -+static int msm_bus_noc_mas_init(struct msm_bus_noc_info *ninfo, -+ struct msm_bus_inode_info *info) -+{ -+ int i; -+ struct msm_bus_noc_qos_priority *prio; -+ prio = kzalloc(sizeof(struct msm_bus_noc_qos_priority), -+ GFP_KERNEL); -+ if (!prio) { -+ MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n", -+ info->node_info->id); -+ return -ENOMEM; -+ } -+ -+ prio->read_prio = info->node_info->prio_rd; -+ prio->write_prio = info->node_info->prio_wr; -+ prio->p1 = info->node_info->prio1; -+ prio->p0 = info->node_info->prio0; -+ info->hw_data = (void *)prio; -+ -+ if (!info->node_info->qport) { -+ MSM_BUS_DBG("No QoS Ports to init\n"); -+ return 0; -+ } -+ -+ for (i = 0; i < info->node_info->num_mports; i++) { -+ if (info->node_info->mode != NOC_QOS_MODE_BYPASS) { -+ noc_set_qos_priority(ninfo->base, ninfo->qos_baseoffset, -+ info->node_info->qport[i], ninfo->qos_delta, -+ prio); -+ -+ if (info->node_info->mode != NOC_QOS_MODE_FIXED) { -+ struct msm_bus_noc_qos_bw qbw; -+ qbw.ws = info->node_info->ws; -+ qbw.bw = 0; -+ msm_bus_noc_set_qos_bw(ninfo->base, -+ ninfo->qos_baseoffset, -+ ninfo->qos_freq, info->node_info-> -+ qport[i], ninfo->qos_delta, -+ info->node_info->perm_mode, -+ &qbw); -+ } -+ } -+ -+ noc_set_qos_mode(ninfo->base, ninfo->qos_baseoffset, -+ info->node_info->qport[i], ninfo->qos_delta, -+ info->node_info->mode, -+ info->node_info->perm_mode); -+ } -+ -+ return 0; -+} -+ -+static void msm_bus_noc_node_init(void *hw_data, -+ struct msm_bus_inode_info *info) -+{ -+ struct msm_bus_noc_info *ninfo = -+ (struct msm_bus_noc_info *)hw_data; -+ -+ if (!IS_SLAVE(info->node_info->priv_id)) -+ if (info->node_info->hw_sel != MSM_BUS_RPM) -+ msm_bus_noc_mas_init(ninfo, info); -+} -+ -+static int msm_bus_noc_allocate_commit_data(struct msm_bus_fabric_registration -+ *fab_pdata, void **cdata, int ctx) -+{ -+ struct msm_bus_noc_commit **cd = (struct msm_bus_noc_commit **)cdata; -+ struct msm_bus_noc_info *ninfo = -+ (struct msm_bus_noc_info *)fab_pdata->hw_data; -+ -+ *cd = kzalloc(sizeof(struct msm_bus_noc_commit), GFP_KERNEL); -+ if (!*cd) { -+ MSM_BUS_DBG("Couldn't alloc mem for cdata\n"); -+ return -ENOMEM; -+ } -+ -+ (*cd)->mas = ninfo->cdata[ctx].mas; -+ (*cd)->slv = ninfo->cdata[ctx].slv; -+ -+ return 0; -+} -+ -+static void *msm_bus_noc_allocate_noc_data(struct platform_device *pdev, -+ struct msm_bus_fabric_registration *fab_pdata) -+{ -+ struct resource *noc_mem; -+ struct resource *noc_io; -+ struct msm_bus_noc_info *ninfo; -+ int i; -+ -+ ninfo = kzalloc(sizeof(struct msm_bus_noc_info), GFP_KERNEL); -+ if (!ninfo) { -+ MSM_BUS_DBG("Couldn't alloc mem for noc info\n"); -+ return NULL; -+ } -+ -+ ninfo->nmasters = fab_pdata->nmasters; -+ ninfo->nqos_masters = fab_pdata->nmasters; -+ ninfo->nslaves = fab_pdata->nslaves; -+ ninfo->qos_freq = fab_pdata->qos_freq; -+ -+ if (!fab_pdata->qos_baseoffset) -+ ninfo->qos_baseoffset = QOS_DEFAULT_BASEOFFSET; -+ else -+ ninfo->qos_baseoffset = fab_pdata->qos_baseoffset; -+ -+ if (!fab_pdata->qos_delta) -+ ninfo->qos_delta = QOS_DEFAULT_DELTA; -+ else -+ ninfo->qos_delta = fab_pdata->qos_delta; -+ -+ ninfo->mas_modes = kzalloc(sizeof(uint32_t) * fab_pdata->nmasters, -+ GFP_KERNEL); -+ if (!ninfo->mas_modes) { -+ MSM_BUS_DBG("Couldn't alloc mem for noc master-modes\n"); -+ kfree(ninfo); -+ return NULL; -+ } -+ -+ for (i = 0; i < NUM_CTX; i++) { -+ ninfo->cdata[i].mas = kzalloc(sizeof(struct -+ msm_bus_node_hw_info) * fab_pdata->nmasters * 2, -+ GFP_KERNEL); -+ if (!ninfo->cdata[i].mas) { -+ MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n"); -+ kfree(ninfo->mas_modes); -+ kfree(ninfo); -+ return NULL; -+ } -+ -+ ninfo->cdata[i].slv = kzalloc(sizeof(struct -+ msm_bus_node_hw_info) * fab_pdata->nslaves * 2, -+ GFP_KERNEL); -+ if (!ninfo->cdata[i].slv) { -+ MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n"); -+ kfree(ninfo->cdata[i].mas); -+ goto err; -+ } -+ } -+ -+ /* If it's a virtual fabric, don't get memory info */ -+ if (fab_pdata->virt) -+ goto skip_mem; -+ -+ noc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!noc_mem && !fab_pdata->virt) { -+ MSM_BUS_ERR("Cannot get NoC Base address\n"); -+ goto err; -+ } -+ -+ noc_io = request_mem_region(noc_mem->start, -+ resource_size(noc_mem), pdev->name); -+ if (!noc_io) { -+ MSM_BUS_ERR("NoC memory unavailable\n"); -+ goto err; -+ } -+ -+ ninfo->base = ioremap(noc_mem->start, resource_size(noc_mem)); -+ if (!ninfo->base) { -+ MSM_BUS_ERR("IOremap failed for NoC!\n"); -+ release_mem_region(noc_mem->start, resource_size(noc_mem)); -+ goto err; -+ } -+ -+skip_mem: -+ fab_pdata->hw_data = (void *)ninfo; -+ return (void *)ninfo; -+ -+err: -+ kfree(ninfo->mas_modes); -+ kfree(ninfo); -+ return NULL; -+} -+ -+static void free_commit_data(void *cdata) -+{ -+ struct msm_bus_noc_commit *cd = (struct msm_bus_noc_commit *)cdata; -+ -+ kfree(cd->mas); -+ kfree(cd->slv); -+ kfree(cd); -+} -+ -+static bool msm_bus_noc_update_bw_reg(int mode) -+{ -+ bool ret = false; -+ -+ if ((mode == NOC_QOS_MODE_LIMITER) || -+ (mode == NOC_QOS_MODE_REGULATOR)) -+ ret = true; -+ -+ return ret; -+} -+ -+static void msm_bus_noc_update_bw(struct msm_bus_inode_info *hop, -+ struct msm_bus_inode_info *info, -+ struct msm_bus_fabric_registration *fab_pdata, -+ void *sel_cdata, int *master_tiers, -+ int64_t add_bw) -+{ -+ struct msm_bus_noc_info *ninfo; -+ struct msm_bus_noc_qos_bw qos_bw; -+ int i, ports; -+ int64_t bw; -+ struct msm_bus_noc_commit *sel_cd = -+ (struct msm_bus_noc_commit *)sel_cdata; -+ -+ ninfo = (struct msm_bus_noc_info *)fab_pdata->hw_data; -+ if (!ninfo->qos_freq) { -+ MSM_BUS_DBG("NOC: No qos frequency to update bw\n"); -+ return; -+ } -+ -+ if (info->node_info->num_mports == 0) { -+ MSM_BUS_DBG("NOC: Skip Master BW\n"); -+ goto skip_mas_bw; -+ } -+ -+ ports = info->node_info->num_mports; -+ bw = INTERLEAVED_BW(fab_pdata, add_bw, ports); -+ -+ MSM_BUS_DBG("NOC: Update bw for: %d: %lld\n", -+ info->node_info->priv_id, add_bw); -+ for (i = 0; i < ports; i++) { -+ sel_cd->mas[info->node_info->masterp[i]].bw += bw; -+ sel_cd->mas[info->node_info->masterp[i]].hw_id = -+ info->node_info->mas_hw_id; -+ MSM_BUS_DBG("NOC: Update mas_bw: ID: %d, BW: %llu ports:%d\n", -+ info->node_info->priv_id, -+ sel_cd->mas[info->node_info->masterp[i]].bw, -+ ports); -+ /* Check if info is a shared master. -+ * If it is, mark it dirty -+ * If it isn't, then set QOS Bandwidth -+ **/ -+ if (info->node_info->hw_sel == MSM_BUS_RPM) -+ sel_cd->mas[info->node_info->masterp[i]].dirty = 1; -+ else { -+ if (!info->node_info->qport) { -+ MSM_BUS_DBG("No qos ports to update!\n"); -+ break; -+ } -+ -+ if (!(info->node_info->mode == NOC_QOS_MODE_REGULATOR) -+ || (info->node_info->mode == -+ NOC_QOS_MODE_LIMITER)) { -+ MSM_BUS_DBG("Skip QoS reg programming\n"); -+ break; -+ } -+ qos_bw.bw = sel_cd->mas[info->node_info->masterp[i]]. -+ bw; -+ qos_bw.ws = info->node_info->ws; -+ msm_bus_noc_set_qos_bw(ninfo->base, -+ ninfo->qos_baseoffset, -+ ninfo->qos_freq, -+ info->node_info->qport[i], ninfo->qos_delta, -+ info->node_info->perm_mode, &qos_bw); -+ MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n", -+ qos_bw.ws); -+ } -+ } -+ -+skip_mas_bw: -+ ports = hop->node_info->num_sports; -+ for (i = 0; i < ports; i++) { -+ sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw; -+ sel_cd->slv[hop->node_info->slavep[i]].hw_id = -+ hop->node_info->slv_hw_id; -+ MSM_BUS_DBG("NOC: Update slave_bw for ID: %d -> %llu\n", -+ hop->node_info->priv_id, -+ sel_cd->slv[hop->node_info->slavep[i]].bw); -+ MSM_BUS_DBG("NOC: Update slave_bw for hw_id: %d, index: %d\n", -+ hop->node_info->slv_hw_id, hop->node_info->slavep[i]); -+ /* Check if hop is a shared slave. -+ * If it is, mark it dirty -+ * If it isn't, then nothing to be done as the -+ * slaves are in bypass mode. -+ **/ -+ if (hop->node_info->hw_sel == MSM_BUS_RPM) -+ sel_cd->slv[hop->node_info->slavep[i]].dirty = 1; -+ } -+} -+ -+static int msm_bus_noc_commit(struct msm_bus_fabric_registration -+ *fab_pdata, void *hw_data, void **cdata) -+{ -+ MSM_BUS_DBG("\nReached NOC Commit\n"); -+ msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata); -+ return 0; -+} -+ -+static int msm_bus_noc_port_halt(uint32_t haltid, uint8_t mport) -+{ -+ return 0; -+} -+ -+static int msm_bus_noc_port_unhalt(uint32_t haltid, uint8_t mport) -+{ -+ return 0; -+} -+ -+static int msm_bus_noc_qos_init(struct msm_bus_node_device_type *info, -+ void __iomem *qos_base, -+ uint32_t qos_off, uint32_t qos_delta, -+ uint32_t qos_freq) -+{ -+ struct msm_bus_noc_qos_priority prio; -+ int ret = 0; -+ int i; -+ -+ prio.p1 = info->node_info->qos_params.prio1; -+ prio.p0 = info->node_info->qos_params.prio0; -+ -+ if (!info->node_info->qport) { -+ MSM_BUS_DBG("No QoS Ports to init\n"); -+ ret = 0; -+ goto err_qos_init; -+ } -+ -+ for (i = 0; i < info->node_info->num_qports; i++) { -+ if (info->node_info->qos_params.mode != NOC_QOS_MODE_BYPASS) { -+ noc_set_qos_priority(qos_base, qos_off, -+ info->node_info->qport[i], qos_delta, -+ &prio); -+ -+ if (info->node_info->qos_params.mode != -+ NOC_QOS_MODE_FIXED) { -+ struct msm_bus_noc_qos_bw qbw; -+ qbw.ws = info->node_info->qos_params.ws; -+ qbw.bw = 0; -+ msm_bus_noc_set_qos_bw(qos_base, qos_off, -+ qos_freq, -+ info->node_info->qport[i], -+ qos_delta, -+ info->node_info->qos_params.mode, -+ &qbw); -+ } -+ } -+ -+ noc_set_qos_mode(qos_base, qos_off, info->node_info->qport[i], -+ qos_delta, info->node_info->qos_params.mode, -+ (1 << info->node_info->qos_params.mode)); -+ } -+err_qos_init: -+ return ret; -+} -+ -+static int msm_bus_noc_set_bw(struct msm_bus_node_device_type *dev, -+ void __iomem *qos_base, -+ uint32_t qos_off, uint32_t qos_delta, -+ uint32_t qos_freq) -+{ -+ int ret = 0; -+ uint64_t bw = 0; -+ int i; -+ struct msm_bus_node_info_type *info = dev->node_info; -+ -+ if (info && info->num_qports && -+ ((info->qos_params.mode == NOC_QOS_MODE_REGULATOR) || -+ (info->qos_params.mode == -+ NOC_QOS_MODE_LIMITER))) { -+ struct msm_bus_noc_qos_bw qos_bw; -+ -+ bw = msm_bus_div64(info->num_qports, -+ dev->node_ab.ab[DUAL_CTX]); -+ -+ for (i = 0; i < info->num_qports; i++) { -+ if (!info->qport) { -+ MSM_BUS_DBG("No qos ports to update!\n"); -+ break; -+ } -+ -+ qos_bw.bw = bw; -+ qos_bw.ws = info->qos_params.ws; -+ msm_bus_noc_set_qos_bw(qos_base, qos_off, qos_freq, -+ info->qport[i], qos_delta, -+ info->qos_params.mode, &qos_bw); -+ MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n", -+ qos_bw.ws); -+ } -+ } -+ return ret; -+} -+int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata, -+ struct msm_bus_hw_algorithm *hw_algo) -+{ -+ /* Set interleaving to true by default */ -+ pdata->il_flag = true; -+ hw_algo->allocate_commit_data = msm_bus_noc_allocate_commit_data; -+ hw_algo->allocate_hw_data = msm_bus_noc_allocate_noc_data; -+ hw_algo->node_init = msm_bus_noc_node_init; -+ hw_algo->free_commit_data = free_commit_data; -+ hw_algo->update_bw = msm_bus_noc_update_bw; -+ hw_algo->commit = msm_bus_noc_commit; -+ hw_algo->port_halt = msm_bus_noc_port_halt; -+ hw_algo->port_unhalt = msm_bus_noc_port_unhalt; -+ hw_algo->update_bw_reg = msm_bus_noc_update_bw_reg; -+ hw_algo->config_master = NULL; -+ hw_algo->config_limiter = NULL; -+ -+ return 0; -+} -+ -+int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev) -+{ -+ if (!bus_dev) -+ return -ENODEV; -+ else { -+ bus_dev->fabdev->noc_ops.qos_init = msm_bus_noc_qos_init; -+ bus_dev->fabdev->noc_ops.set_bw = msm_bus_noc_set_bw; -+ bus_dev->fabdev->noc_ops.limit_mport = NULL; -+ bus_dev->fabdev->noc_ops.update_bw_reg = -+ msm_bus_noc_update_bw_reg; -+ } -+ return 0; -+} -+EXPORT_SYMBOL(msm_bus_noc_set_ops); ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_noc.h -@@ -0,0 +1,76 @@ -+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H -+#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H -+ -+enum msm_bus_noc_qos_mode_type { -+ NOC_QOS_MODE_FIXED = 0, -+ NOC_QOS_MODE_LIMITER, -+ NOC_QOS_MODE_BYPASS, -+ NOC_QOS_MODE_REGULATOR, -+ NOC_QOS_MODE_MAX, -+}; -+ -+enum msm_bus_noc_qos_mode_perm { -+ NOC_QOS_PERM_MODE_FIXED = (1 << NOC_QOS_MODE_FIXED), -+ NOC_QOS_PERM_MODE_LIMITER = (1 << NOC_QOS_MODE_LIMITER), -+ NOC_QOS_PERM_MODE_BYPASS = (1 << NOC_QOS_MODE_BYPASS), -+ NOC_QOS_PERM_MODE_REGULATOR = (1 << NOC_QOS_MODE_REGULATOR), -+}; -+ -+#define NOC_QOS_MODES_ALL_PERM (NOC_QOS_PERM_MODE_FIXED | \ -+ NOC_QOS_PERM_MODE_LIMITER | NOC_QOS_PERM_MODE_BYPASS | \ -+ NOC_QOS_PERM_MODE_REGULATOR) -+ -+struct msm_bus_noc_commit { -+ struct msm_bus_node_hw_info *mas; -+ struct msm_bus_node_hw_info *slv; -+}; -+ -+struct msm_bus_noc_info { -+ void __iomem *base; -+ uint32_t base_addr; -+ uint32_t nmasters; -+ uint32_t nqos_masters; -+ uint32_t nslaves; -+ uint32_t qos_freq; /* QOS Clock in KHz */ -+ uint32_t qos_baseoffset; -+ uint32_t qos_delta; -+ uint32_t *mas_modes; -+ struct msm_bus_noc_commit cdata[NUM_CTX]; -+}; -+ -+struct msm_bus_noc_qos_priority { -+ uint32_t high_prio; -+ uint32_t low_prio; -+ uint32_t read_prio; -+ uint32_t write_prio; -+ uint32_t p1; -+ uint32_t p0; -+}; -+ -+struct msm_bus_noc_qos_bw { -+ uint64_t bw; /* Bandwidth in bytes per second */ -+ uint32_t ws; /* Window size in nano seconds */ -+}; -+ -+void msm_bus_noc_init(struct msm_bus_noc_info *ninfo); -+uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off, -+ uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode); -+void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off, -+ uint32_t mport, uint32_t qos_delta, -+ struct msm_bus_noc_qos_priority *qprio); -+void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off, -+ uint32_t qos_freq, uint32_t mport, uint32_t qos_delta, -+ uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw); -+#endif /*_ARCH_ARM_MACH_MSM_BUS_NOC_H */ ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_of.c -@@ -0,0 +1,705 @@ -+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include "msm-bus.h" -+#include "msm-bus-board.h" -+#include "msm_bus_core.h" -+ -+static const char * const hw_sel_name[] = {"RPM", "NoC", "BIMC", NULL}; -+static const char * const mode_sel_name[] = {"Fixed", "Limiter", "Bypass", -+ "Regulator", NULL}; -+ -+static int get_num(const char *const str[], const char *name) -+{ -+ int i = 0; -+ -+ do { -+ if (!strcmp(name, str[i])) -+ return i; -+ -+ i++; -+ } while (str[i] != NULL); -+ -+ pr_err("Error: string %s not found\n", name); -+ return -EINVAL; -+} -+ -+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) -+static struct msm_bus_scale_pdata *get_pdata(struct platform_device *pdev, -+ struct device_node *of_node) -+{ -+ struct msm_bus_scale_pdata *pdata = NULL; -+ struct msm_bus_paths *usecase = NULL; -+ int i = 0, j, ret, num_usecases = 0, num_paths, len; -+ const uint32_t *vec_arr = NULL; -+ bool mem_err = false; -+ -+ if (!pdev) { -+ pr_err("Error: Null Platform device\n"); -+ return NULL; -+ } -+ -+ pdata = devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_scale_pdata), -+ GFP_KERNEL); -+ if (!pdata) { -+ pr_err("Error: Memory allocation for pdata failed\n"); -+ mem_err = true; -+ goto err; -+ } -+ -+ ret = of_property_read_string(of_node, "qcom,msm-bus,name", -+ &pdata->name); -+ if (ret) { -+ pr_err("Error: Client name not found\n"); -+ goto err; -+ } -+ -+ ret = of_property_read_u32(of_node, "qcom,msm-bus,num-cases", -+ &num_usecases); -+ if (ret) { -+ pr_err("Error: num-usecases not found\n"); -+ goto err; -+ } -+ -+ pdata->num_usecases = num_usecases; -+ -+ if (of_property_read_bool(of_node, "qcom,msm-bus,active-only")) -+ pdata->active_only = 1; -+ else { -+ pr_debug("active_only flag absent.\n"); -+ pr_debug("Using dual context by default\n"); -+ } -+ -+ usecase = devm_kzalloc(&pdev->dev, (sizeof(struct msm_bus_paths) * -+ pdata->num_usecases), GFP_KERNEL); -+ if (!usecase) { -+ pr_err("Error: Memory allocation for paths failed\n"); -+ mem_err = true; -+ goto err; -+ } -+ -+ ret = of_property_read_u32(of_node, "qcom,msm-bus,num-paths", -+ &num_paths); -+ if (ret) { -+ pr_err("Error: num_paths not found\n"); -+ goto err; -+ } -+ -+ vec_arr = of_get_property(of_node, "qcom,msm-bus,vectors-KBps", &len); -+ if (vec_arr == NULL) { -+ pr_err("Error: Vector array not found\n"); -+ goto err; -+ } -+ -+ if (len != num_usecases * num_paths * sizeof(uint32_t) * 4) { -+ pr_err("Error: Length-error on getting vectors\n"); -+ goto err; -+ } -+ -+ for (i = 0; i < num_usecases; i++) { -+ usecase[i].num_paths = num_paths; -+ usecase[i].vectors = devm_kzalloc(&pdev->dev, num_paths * -+ sizeof(struct msm_bus_vectors), GFP_KERNEL); -+ if (!usecase[i].vectors) { -+ mem_err = true; -+ pr_err("Error: Mem alloc failure in vectors\n"); -+ goto err; -+ } -+ -+ for (j = 0; j < num_paths; j++) { -+ int index = ((i * num_paths) + j) * 4; -+ usecase[i].vectors[j].src = be32_to_cpu(vec_arr[index]); -+ usecase[i].vectors[j].dst = -+ be32_to_cpu(vec_arr[index + 1]); -+ usecase[i].vectors[j].ab = (uint64_t) -+ KBTOB(be32_to_cpu(vec_arr[index + 2])); -+ usecase[i].vectors[j].ib = (uint64_t) -+ KBTOB(be32_to_cpu(vec_arr[index + 3])); -+ } -+ } -+ -+ pdata->usecase = usecase; -+ return pdata; -+err: -+ if (mem_err) { -+ for (; i > 0; i--) -+ kfree(usecase[i-1].vectors); -+ -+ kfree(usecase); -+ kfree(pdata); -+ } -+ -+ return NULL; -+} -+ -+/** -+ * msm_bus_cl_get_pdata() - Generate bus client data from device tree -+ * provided by clients. -+ * -+ * of_node: Device tree node to extract information from -+ * -+ * The function returns a valid pointer to the allocated bus-scale-pdata -+ * if the vectors were correctly read from the client's device node. -+ * Any error in reading or parsing the device node will return NULL -+ * to the caller. -+ */ -+struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev) -+{ -+ struct device_node *of_node; -+ struct msm_bus_scale_pdata *pdata = NULL; -+ -+ if (!pdev) { -+ pr_err("Error: Null Platform device\n"); -+ return NULL; -+ } -+ -+ of_node = pdev->dev.of_node; -+ pdata = get_pdata(pdev, of_node); -+ if (!pdata) { -+ pr_err("client has to provide missing entry for successful registration\n"); -+ return NULL; -+ } -+ -+ return pdata; -+} -+EXPORT_SYMBOL(msm_bus_cl_get_pdata); -+ -+/** -+ * msm_bus_cl_pdata_from_node() - Generate bus client data from device tree -+ * node provided by clients. This function should be used when a client -+ * driver needs to register multiple bus-clients from a single device-tree -+ * node associated with the platform-device. -+ * -+ * of_node: The subnode containing information about the bus scaling -+ * data -+ * -+ * pdev: Platform device associated with the device-tree node -+ * -+ * The function returns a valid pointer to the allocated bus-scale-pdata -+ * if the vectors were correctly read from the client's device node. -+ * Any error in reading or parsing the device node will return NULL -+ * to the caller. -+ */ -+struct msm_bus_scale_pdata *msm_bus_pdata_from_node( -+ struct platform_device *pdev, struct device_node *of_node) -+{ -+ struct msm_bus_scale_pdata *pdata = NULL; -+ -+ if (!pdev) { -+ pr_err("Error: Null Platform device\n"); -+ return NULL; -+ } -+ -+ if (!of_node) { -+ pr_err("Error: Null of_node passed to bus driver\n"); -+ return NULL; -+ } -+ -+ pdata = get_pdata(pdev, of_node); -+ if (!pdata) { -+ pr_err("client has to provide missing entry for successful registration\n"); -+ return NULL; -+ } -+ -+ return pdata; -+} -+EXPORT_SYMBOL(msm_bus_pdata_from_node); -+ -+/** -+ * msm_bus_cl_clear_pdata() - Clear pdata allocated from device-tree -+ * of_node: Device tree node to extract information from -+ */ -+void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata) -+{ -+ int i; -+ -+ for (i = 0; i < pdata->num_usecases; i++) -+ kfree(pdata->usecase[i].vectors); -+ -+ kfree(pdata->usecase); -+ kfree(pdata); -+} -+EXPORT_SYMBOL(msm_bus_cl_clear_pdata); -+#endif -+ -+static int *get_arr(struct platform_device *pdev, -+ const struct device_node *node, const char *prop, -+ int *nports) -+{ -+ int size = 0, ret; -+ int *arr = NULL; -+ -+ if (of_get_property(node, prop, &size)) { -+ *nports = size / sizeof(int); -+ } else { -+ pr_debug("Property %s not available\n", prop); -+ *nports = 0; -+ return NULL; -+ } -+ -+ if (!size) { -+ *nports = 0; -+ return NULL; -+ } -+ -+ arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); -+ if (ZERO_OR_NULL_PTR(arr)) { -+ pr_err("Error: Failed to alloc mem for %s\n", prop); -+ return NULL; -+ } -+ -+ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports); -+ if (ret) { -+ pr_err("Error in reading property: %s\n", prop); -+ goto err; -+ } -+ -+ return arr; -+err: -+ devm_kfree(&pdev->dev, arr); -+ return NULL; -+} -+ -+static u64 *get_th_params(struct platform_device *pdev, -+ const struct device_node *node, const char *prop, -+ int *nports) -+{ -+ int size = 0, ret; -+ u64 *ret_arr = NULL; -+ int *arr = NULL; -+ int i; -+ -+ if (of_get_property(node, prop, &size)) { -+ *nports = size / sizeof(int); -+ } else { -+ pr_debug("Property %s not available\n", prop); -+ *nports = 0; -+ return NULL; -+ } -+ -+ if (!size) { -+ *nports = 0; -+ return NULL; -+ } -+ -+ ret_arr = devm_kzalloc(&pdev->dev, (*nports * sizeof(u64)), -+ GFP_KERNEL); -+ if (ZERO_OR_NULL_PTR(ret_arr)) { -+ pr_err("Error: Failed to alloc mem for ret arr %s\n", prop); -+ return NULL; -+ } -+ -+ arr = kzalloc(size, GFP_KERNEL); -+ if ((ZERO_OR_NULL_PTR(arr))) { -+ pr_err("Error: Failed to alloc temp mem for %s\n", prop); -+ return NULL; -+ } -+ -+ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports); -+ if (ret) { -+ pr_err("Error in reading property: %s\n", prop); -+ goto err; -+ } -+ -+ for (i = 0; i < *nports; i++) -+ ret_arr[i] = (uint64_t)KBTOB(arr[i]); -+ -+ MSM_BUS_DBG("%s: num entries %d prop %s", __func__, *nports, prop); -+ -+ for (i = 0; i < *nports; i++) -+ MSM_BUS_DBG("Th %d val %llu", i, ret_arr[i]); -+ -+ kfree(arr); -+ return ret_arr; -+err: -+ kfree(arr); -+ devm_kfree(&pdev->dev, ret_arr); -+ return NULL; -+} -+ -+static struct msm_bus_node_info *get_nodes(struct device_node *of_node, -+ struct platform_device *pdev, -+ struct msm_bus_fabric_registration *pdata) -+{ -+ struct msm_bus_node_info *info; -+ struct device_node *child_node = NULL; -+ int i = 0, ret; -+ int num_bw = 0; -+ u32 temp; -+ -+ for_each_child_of_node(of_node, child_node) { -+ i++; -+ } -+ -+ pdata->len = i; -+ info = (struct msm_bus_node_info *) -+ devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_node_info) * -+ pdata->len, GFP_KERNEL); -+ if (ZERO_OR_NULL_PTR(info)) { -+ pr_err("Failed to alloc memory for nodes: %d\n", pdata->len); -+ goto err; -+ } -+ -+ i = 0; -+ child_node = NULL; -+ for_each_child_of_node(of_node, child_node) { -+ const char *sel_str; -+ -+ ret = of_property_read_string(child_node, "label", -+ &info[i].name); -+ if (ret) -+ pr_err("Error reading node label\n"); -+ -+ ret = of_property_read_u32(child_node, "cell-id", &info[i].id); -+ if (ret) { -+ pr_err("Error reading node id\n"); -+ goto err; -+ } -+ -+ if (of_property_read_bool(child_node, "qcom,gateway")) -+ info[i].gateway = 1; -+ -+ of_property_read_u32(child_node, "qcom,mas-hw-id", -+ &info[i].mas_hw_id); -+ -+ of_property_read_u32(child_node, "qcom,slv-hw-id", -+ &info[i].slv_hw_id); -+ info[i].masterp = get_arr(pdev, child_node, -+ "qcom,masterp", &info[i].num_mports); -+ /* No need to store number of qports */ -+ info[i].qport = get_arr(pdev, child_node, -+ "qcom,qport", &ret); -+ pdata->nmasters += info[i].num_mports; -+ -+ -+ info[i].slavep = get_arr(pdev, child_node, -+ "qcom,slavep", &info[i].num_sports); -+ pdata->nslaves += info[i].num_sports; -+ -+ -+ info[i].tier = get_arr(pdev, child_node, -+ "qcom,tier", &info[i].num_tiers); -+ -+ if (of_property_read_bool(child_node, "qcom,ahb")) -+ info[i].ahb = 1; -+ -+ ret = of_property_read_string(child_node, "qcom,hw-sel", -+ &sel_str); -+ if (ret) -+ info[i].hw_sel = 0; -+ else { -+ ret = get_num(hw_sel_name, sel_str); -+ if (ret < 0) { -+ pr_err("Invalid hw-sel\n"); -+ goto err; -+ } -+ -+ info[i].hw_sel = ret; -+ } -+ -+ of_property_read_u32(child_node, "qcom,buswidth", -+ &info[i].buswidth); -+ of_property_read_u32(child_node, "qcom,ws", &info[i].ws); -+ -+ info[i].dual_conf = -+ of_property_read_bool(child_node, "qcom,dual-conf"); -+ -+ -+ info[i].th = get_th_params(pdev, child_node, "qcom,thresh", -+ &info[i].num_thresh); -+ -+ info[i].bimc_bw = get_th_params(pdev, child_node, -+ "qcom,bimc,bw", &num_bw); -+ -+ if (num_bw != info[i].num_thresh) { -+ pr_err("%s:num_bw %d must equal num_thresh %d", -+ __func__, num_bw, info[i].num_thresh); -+ pr_err("%s:Err setting up dual conf for %s", -+ __func__, info[i].name); -+ goto err; -+ } -+ -+ of_property_read_u32(child_node, "qcom,bimc,gp", -+ &info[i].bimc_gp); -+ of_property_read_u32(child_node, "qcom,bimc,thmp", -+ &info[i].bimc_thmp); -+ -+ ret = of_property_read_string(child_node, "qcom,mode-thresh", -+ &sel_str); -+ if (ret) -+ info[i].mode_thresh = 0; -+ else { -+ ret = get_num(mode_sel_name, sel_str); -+ if (ret < 0) { -+ pr_err("Unknown mode :%s\n", sel_str); -+ goto err; -+ } -+ -+ info[i].mode_thresh = ret; -+ MSM_BUS_DBG("AXI: THreshold mode set: %d\n", -+ info[i].mode_thresh); -+ } -+ -+ ret = of_property_read_string(child_node, "qcom,mode", -+ &sel_str); -+ -+ if (ret) -+ info[i].mode = 0; -+ else { -+ ret = get_num(mode_sel_name, sel_str); -+ if (ret < 0) { -+ pr_err("Unknown mode :%s\n", sel_str); -+ goto err; -+ } -+ -+ info[i].mode = ret; -+ } -+ -+ info[i].nr_lim = -+ of_property_read_bool(child_node, "qcom,nr-lim"); -+ -+ ret = of_property_read_u32(child_node, "qcom,ff", -+ &info[i].ff); -+ if (ret) { -+ pr_debug("fudge factor not present %d", info[i].id); -+ info[i].ff = 0; -+ } -+ -+ ret = of_property_read_u32(child_node, "qcom,floor-bw", -+ &temp); -+ if (ret) { -+ pr_debug("fabdev floor bw not present %d", info[i].id); -+ info[i].floor_bw = 0; -+ } else { -+ info[i].floor_bw = KBTOB(temp); -+ } -+ -+ info[i].rt_mas = -+ of_property_read_bool(child_node, "qcom,rt-mas"); -+ -+ ret = of_property_read_string(child_node, "qcom,perm-mode", -+ &sel_str); -+ if (ret) -+ info[i].perm_mode = 0; -+ else { -+ ret = get_num(mode_sel_name, sel_str); -+ if (ret < 0) -+ goto err; -+ -+ info[i].perm_mode = 1 << ret; -+ } -+ -+ of_property_read_u32(child_node, "qcom,prio-lvl", -+ &info[i].prio_lvl); -+ of_property_read_u32(child_node, "qcom,prio-rd", -+ &info[i].prio_rd); -+ of_property_read_u32(child_node, "qcom,prio-wr", -+ &info[i].prio_wr); -+ of_property_read_u32(child_node, "qcom,prio0", &info[i].prio0); -+ of_property_read_u32(child_node, "qcom,prio1", &info[i].prio1); -+ ret = of_property_read_string(child_node, "qcom,slaveclk-dual", -+ &info[i].slaveclk[DUAL_CTX]); -+ if (!ret) -+ pr_debug("Got slaveclk_dual: %s\n", -+ info[i].slaveclk[DUAL_CTX]); -+ else -+ info[i].slaveclk[DUAL_CTX] = NULL; -+ -+ ret = of_property_read_string(child_node, -+ "qcom,slaveclk-active", &info[i].slaveclk[ACTIVE_CTX]); -+ if (!ret) -+ pr_debug("Got slaveclk_active\n"); -+ else -+ info[i].slaveclk[ACTIVE_CTX] = NULL; -+ -+ ret = of_property_read_string(child_node, "qcom,memclk-dual", -+ &info[i].memclk[DUAL_CTX]); -+ if (!ret) -+ pr_debug("Got memclk_dual\n"); -+ else -+ info[i].memclk[DUAL_CTX] = NULL; -+ -+ ret = of_property_read_string(child_node, "qcom,memclk-active", -+ &info[i].memclk[ACTIVE_CTX]); -+ if (!ret) -+ pr_debug("Got memclk_active\n"); -+ else -+ info[i].memclk[ACTIVE_CTX] = NULL; -+ -+ ret = of_property_read_string(child_node, "qcom,iface-clk-node", -+ &info[i].iface_clk_node); -+ if (!ret) -+ pr_debug("Got iface_clk_node\n"); -+ else -+ info[i].iface_clk_node = NULL; -+ -+ pr_debug("Node name: %s\n", info[i].name); -+ of_node_put(child_node); -+ i++; -+ } -+ -+ pr_debug("Bus %d added: %d masters\n", pdata->id, pdata->nmasters); -+ pr_debug("Bus %d added: %d slaves\n", pdata->id, pdata->nslaves); -+ return info; -+err: -+ return NULL; -+} -+ -+void msm_bus_of_get_nfab(struct platform_device *pdev, -+ struct msm_bus_fabric_registration *pdata) -+{ -+ struct device_node *of_node; -+ int ret, nfab = 0; -+ -+ if (!pdev) { -+ pr_err("Error: Null platform device\n"); -+ return; -+ } -+ -+ of_node = pdev->dev.of_node; -+ ret = of_property_read_u32(of_node, "qcom,nfab", -+ &nfab); -+ if (!ret) -+ pr_debug("Fab_of: Read number of buses: %u\n", nfab); -+ -+ msm_bus_board_set_nfab(pdata, nfab); -+} -+ -+struct msm_bus_fabric_registration -+ *msm_bus_of_get_fab_data(struct platform_device *pdev) -+{ -+ struct device_node *of_node; -+ struct msm_bus_fabric_registration *pdata; -+ bool mem_err = false; -+ int ret = 0; -+ const char *sel_str; -+ u32 temp; -+ -+ if (!pdev) { -+ pr_err("Error: Null platform device\n"); -+ return NULL; -+ } -+ -+ of_node = pdev->dev.of_node; -+ pdata = devm_kzalloc(&pdev->dev, -+ sizeof(struct msm_bus_fabric_registration), GFP_KERNEL); -+ if (!pdata) { -+ pr_err("Error: Memory allocation for pdata failed\n"); -+ mem_err = true; -+ goto err; -+ } -+ -+ ret = of_property_read_string(of_node, "label", &pdata->name); -+ if (ret) { -+ pr_err("Error: label not found\n"); -+ goto err; -+ } -+ pr_debug("Fab_of: Read name: %s\n", pdata->name); -+ -+ ret = of_property_read_u32(of_node, "cell-id", -+ &pdata->id); -+ if (ret) { -+ pr_err("Error: num-usecases not found\n"); -+ goto err; -+ } -+ pr_debug("Fab_of: Read id: %u\n", pdata->id); -+ -+ if (of_property_read_bool(of_node, "qcom,ahb")) -+ pdata->ahb = 1; -+ -+ ret = of_property_read_string(of_node, "qcom,fabclk-dual", -+ &pdata->fabclk[DUAL_CTX]); -+ if (ret) { -+ pr_debug("fabclk_dual not available\n"); -+ pdata->fabclk[DUAL_CTX] = NULL; -+ } else -+ pr_debug("Fab_of: Read clk dual ctx: %s\n", -+ pdata->fabclk[DUAL_CTX]); -+ ret = of_property_read_string(of_node, "qcom,fabclk-active", -+ &pdata->fabclk[ACTIVE_CTX]); -+ if (ret) { -+ pr_debug("Error: fabclk_active not available\n"); -+ pdata->fabclk[ACTIVE_CTX] = NULL; -+ } else -+ pr_debug("Fab_of: Read clk act ctx: %s\n", -+ pdata->fabclk[ACTIVE_CTX]); -+ -+ ret = of_property_read_u32(of_node, "qcom,ntieredslaves", -+ &pdata->ntieredslaves); -+ if (ret) { -+ pr_err("Error: ntieredslaves not found\n"); -+ goto err; -+ } -+ -+ ret = of_property_read_u32(of_node, "qcom,qos-freq", &pdata->qos_freq); -+ if (ret) -+ pr_debug("qos_freq not available\n"); -+ -+ ret = of_property_read_string(of_node, "qcom,hw-sel", &sel_str); -+ if (ret) { -+ pr_err("Error: hw_sel not found\n"); -+ goto err; -+ } else { -+ ret = get_num(hw_sel_name, sel_str); -+ if (ret < 0) -+ goto err; -+ -+ pdata->hw_sel = ret; -+ } -+ -+ if (of_property_read_bool(of_node, "qcom,virt")) -+ pdata->virt = true; -+ -+ ret = of_property_read_u32(of_node, "qcom,qos-baseoffset", -+ &pdata->qos_baseoffset); -+ if (ret) -+ pr_debug("%s:qos_baseoffset not available\n", __func__); -+ -+ ret = of_property_read_u32(of_node, "qcom,qos-delta", -+ &pdata->qos_delta); -+ if (ret) -+ pr_debug("%s:qos_delta not available\n", __func__); -+ -+ if (of_property_read_bool(of_node, "qcom,rpm-en")) -+ pdata->rpm_enabled = 1; -+ -+ ret = of_property_read_u32(of_node, "qcom,nr-lim-thresh", -+ &temp); -+ -+ if (ret) { -+ pr_err("nr-lim threshold not specified"); -+ pdata->nr_lim_thresh = 0; -+ } else { -+ pdata->nr_lim_thresh = KBTOB(temp); -+ } -+ -+ ret = of_property_read_u32(of_node, "qcom,eff-fact", -+ &pdata->eff_fact); -+ if (ret) { -+ pr_err("Fab eff-factor not present"); -+ pdata->eff_fact = 0; -+ } -+ -+ pdata->info = get_nodes(of_node, pdev, pdata); -+ return pdata; -+err: -+ return NULL; -+} -+EXPORT_SYMBOL(msm_bus_of_get_fab_data); ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_of_adhoc.c -@@ -0,0 +1,641 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "msm-bus.h" -+#include "msm-bus-board.h" -+#include "msm_bus_rules.h" -+#include "msm_bus_core.h" -+#include "msm_bus_adhoc.h" -+ -+#define DEFAULT_QOS_FREQ 19200 -+#define DEFAULT_UTIL_FACT 100 -+#define DEFAULT_VRAIL_COMP 100 -+ -+static int get_qos_mode(struct platform_device *pdev, -+ struct device_node *node, const char *qos_mode) -+{ -+ const char *qos_names[] = {"fixed", "limiter", "bypass", "regulator"}; -+ int i = 0; -+ int ret = -1; -+ -+ if (!qos_mode) -+ goto exit_get_qos_mode; -+ -+ for (i = 0; i < ARRAY_SIZE(qos_names); i++) { -+ if (!strcmp(qos_mode, qos_names[i])) -+ break; -+ } -+ if (i == ARRAY_SIZE(qos_names)) -+ dev_err(&pdev->dev, "Cannot match mode qos %s using Bypass", -+ qos_mode); -+ else -+ ret = i; -+ -+exit_get_qos_mode: -+ return ret; -+} -+ -+static int *get_arr(struct platform_device *pdev, -+ struct device_node *node, const char *prop, -+ int *nports) -+{ -+ int size = 0, ret; -+ int *arr = NULL; -+ -+ if (of_get_property(node, prop, &size)) { -+ *nports = size / sizeof(int); -+ } else { -+ dev_dbg(&pdev->dev, "Property %s not available\n", prop); -+ *nports = 0; -+ return NULL; -+ } -+ -+ arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); -+ if ((size > 0) && ZERO_OR_NULL_PTR(arr)) { -+ dev_err(&pdev->dev, "Error: Failed to alloc mem for %s\n", -+ prop); -+ return NULL; -+ } -+ -+ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports); -+ if (ret) { -+ dev_err(&pdev->dev, "Error in reading property: %s\n", prop); -+ goto arr_err; -+ } -+ -+ return arr; -+arr_err: -+ devm_kfree(&pdev->dev, arr); -+ return NULL; -+} -+ -+static struct msm_bus_fab_device_type *get_fab_device_info( -+ struct device_node *dev_node, -+ struct platform_device *pdev) -+{ -+ struct msm_bus_fab_device_type *fab_dev; -+ unsigned int ret; -+ struct resource *res; -+ const char *base_name; -+ -+ fab_dev = devm_kzalloc(&pdev->dev, -+ sizeof(struct msm_bus_fab_device_type), -+ GFP_KERNEL); -+ if (!fab_dev) { -+ dev_err(&pdev->dev, -+ "Error: Unable to allocate memory for fab_dev\n"); -+ return NULL; -+ } -+ -+ ret = of_property_read_string(dev_node, "qcom,base-name", &base_name); -+ if (ret) { -+ dev_err(&pdev->dev, "Error: Unable to get base address name\n"); -+ goto fab_dev_err; -+ } -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, base_name); -+ if (!res) { -+ dev_err(&pdev->dev, "Error getting qos base addr %s\n", -+ base_name); -+ goto fab_dev_err; -+ } -+ fab_dev->pqos_base = res->start; -+ fab_dev->qos_range = resource_size(res); -+ fab_dev->bypass_qos_prg = of_property_read_bool(dev_node, -+ "qcom,bypass-qos-prg"); -+ -+ ret = of_property_read_u32(dev_node, "qcom,base-offset", -+ &fab_dev->base_offset); -+ if (ret) -+ dev_dbg(&pdev->dev, "Bus base offset is missing\n"); -+ -+ ret = of_property_read_u32(dev_node, "qcom,qos-off", -+ &fab_dev->qos_off); -+ if (ret) -+ dev_dbg(&pdev->dev, "Bus qos off is missing\n"); -+ -+ -+ ret = of_property_read_u32(dev_node, "qcom,bus-type", -+ &fab_dev->bus_type); -+ if (ret) { -+ dev_warn(&pdev->dev, "Bus type is missing\n"); -+ goto fab_dev_err; -+ } -+ -+ ret = of_property_read_u32(dev_node, "qcom,qos-freq", -+ &fab_dev->qos_freq); -+ if (ret) { -+ dev_dbg(&pdev->dev, "Bus qos freq is missing\n"); -+ fab_dev->qos_freq = DEFAULT_QOS_FREQ; -+ } -+ -+ ret = of_property_read_u32(dev_node, "qcom,util-fact", -+ &fab_dev->util_fact); -+ if (ret) { -+ dev_info(&pdev->dev, "Util-fact is missing, default to %d\n", -+ DEFAULT_UTIL_FACT); -+ fab_dev->util_fact = DEFAULT_UTIL_FACT; -+ } -+ -+ ret = of_property_read_u32(dev_node, "qcom,vrail-comp", -+ &fab_dev->vrail_comp); -+ if (ret) { -+ dev_info(&pdev->dev, "Vrail-comp is missing, default to %d\n", -+ DEFAULT_VRAIL_COMP); -+ fab_dev->vrail_comp = DEFAULT_VRAIL_COMP; -+ } -+ -+ return fab_dev; -+ -+fab_dev_err: -+ devm_kfree(&pdev->dev, fab_dev); -+ fab_dev = 0; -+ return NULL; -+} -+ -+static void get_qos_params( -+ struct device_node * const dev_node, -+ struct platform_device * const pdev, -+ struct msm_bus_node_info_type *node_info) -+{ -+ const char *qos_mode = NULL; -+ unsigned int ret; -+ unsigned int temp; -+ -+ ret = of_property_read_string(dev_node, "qcom,qos-mode", &qos_mode); -+ -+ if (ret) -+ node_info->qos_params.mode = -1; -+ else -+ node_info->qos_params.mode = get_qos_mode(pdev, dev_node, -+ qos_mode); -+ -+ of_property_read_u32(dev_node, "qcom,prio-lvl", -+ &node_info->qos_params.prio_lvl); -+ -+ of_property_read_u32(dev_node, "qcom,prio1", -+ &node_info->qos_params.prio1); -+ -+ of_property_read_u32(dev_node, "qcom,prio0", -+ &node_info->qos_params.prio0); -+ -+ of_property_read_u32(dev_node, "qcom,prio-rd", -+ &node_info->qos_params.prio_rd); -+ -+ of_property_read_u32(dev_node, "qcom,prio-wr", -+ &node_info->qos_params.prio_wr); -+ -+ of_property_read_u32(dev_node, "qcom,gp", -+ &node_info->qos_params.gp); -+ -+ of_property_read_u32(dev_node, "qcom,thmp", -+ &node_info->qos_params.thmp); -+ -+ of_property_read_u32(dev_node, "qcom,ws", -+ &node_info->qos_params.ws); -+ -+ ret = of_property_read_u32(dev_node, "qcom,bw_buffer", &temp); -+ -+ if (ret) -+ node_info->qos_params.bw_buffer = 0; -+ else -+ node_info->qos_params.bw_buffer = KBTOB(temp); -+ -+} -+ -+ -+static struct msm_bus_node_info_type *get_node_info_data( -+ struct device_node * const dev_node, -+ struct platform_device * const pdev) -+{ -+ struct msm_bus_node_info_type *node_info; -+ unsigned int ret; -+ int size; -+ int i; -+ struct device_node *con_node; -+ struct device_node *bus_dev; -+ -+ node_info = devm_kzalloc(&pdev->dev, -+ sizeof(struct msm_bus_node_info_type), -+ GFP_KERNEL); -+ if (!node_info) { -+ dev_err(&pdev->dev, -+ "Error: Unable to allocate memory for node_info\n"); -+ return NULL; -+ } -+ -+ ret = of_property_read_u32(dev_node, "cell-id", &node_info->id); -+ if (ret) { -+ dev_warn(&pdev->dev, "Bus node is missing cell-id\n"); -+ goto node_info_err; -+ } -+ ret = of_property_read_string(dev_node, "label", &node_info->name); -+ if (ret) { -+ dev_warn(&pdev->dev, "Bus node is missing name\n"); -+ goto node_info_err; -+ } -+ node_info->qport = get_arr(pdev, dev_node, "qcom,qport", -+ &node_info->num_qports); -+ -+ if (of_get_property(dev_node, "qcom,connections", &size)) { -+ node_info->num_connections = size / sizeof(int); -+ node_info->connections = devm_kzalloc(&pdev->dev, size, -+ GFP_KERNEL); -+ } else { -+ node_info->num_connections = 0; -+ node_info->connections = 0; -+ } -+ -+ for (i = 0; i < node_info->num_connections; i++) { -+ con_node = of_parse_phandle(dev_node, "qcom,connections", i); -+ if (IS_ERR_OR_NULL(con_node)) -+ goto node_info_err; -+ -+ if (of_property_read_u32(con_node, "cell-id", -+ &node_info->connections[i])) -+ goto node_info_err; -+ of_node_put(con_node); -+ } -+ -+ if (of_get_property(dev_node, "qcom,blacklist", &size)) { -+ node_info->num_blist = size/sizeof(u32); -+ node_info->black_listed_connections = devm_kzalloc(&pdev->dev, -+ size, GFP_KERNEL); -+ } else { -+ node_info->num_blist = 0; -+ node_info->black_listed_connections = 0; -+ } -+ -+ for (i = 0; i < node_info->num_blist; i++) { -+ con_node = of_parse_phandle(dev_node, "qcom,blacklist", i); -+ if (IS_ERR_OR_NULL(con_node)) -+ goto node_info_err; -+ -+ if (of_property_read_u32(con_node, "cell-id", -+ &node_info->black_listed_connections[i])) -+ goto node_info_err; -+ of_node_put(con_node); -+ } -+ -+ bus_dev = of_parse_phandle(dev_node, "qcom,bus-dev", 0); -+ if (!IS_ERR_OR_NULL(bus_dev)) { -+ if (of_property_read_u32(bus_dev, "cell-id", -+ &node_info->bus_device_id)) { -+ dev_err(&pdev->dev, "Can't find bus device. Node %d", -+ node_info->id); -+ goto node_info_err; -+ } -+ -+ of_node_put(bus_dev); -+ } else -+ dev_dbg(&pdev->dev, "Can't find bdev phandle for %d", -+ node_info->id); -+ -+ node_info->is_fab_dev = of_property_read_bool(dev_node, "qcom,fab-dev"); -+ node_info->virt_dev = of_property_read_bool(dev_node, "qcom,virt-dev"); -+ -+ ret = of_property_read_u32(dev_node, "qcom,buswidth", -+ &node_info->buswidth); -+ if (ret) { -+ dev_dbg(&pdev->dev, "Using default 8 bytes %d", node_info->id); -+ node_info->buswidth = 8; -+ } -+ -+ ret = of_property_read_u32(dev_node, "qcom,mas-rpm-id", -+ &node_info->mas_rpm_id); -+ if (ret) { -+ dev_dbg(&pdev->dev, "mas rpm id is missing\n"); -+ node_info->mas_rpm_id = -1; -+ } -+ -+ ret = of_property_read_u32(dev_node, "qcom,slv-rpm-id", -+ &node_info->slv_rpm_id); -+ if (ret) { -+ dev_dbg(&pdev->dev, "slv rpm id is missing\n"); -+ node_info->slv_rpm_id = -1; -+ } -+ ret = of_property_read_u32(dev_node, "qcom,util-fact", -+ &node_info->util_fact); -+ if (ret) -+ node_info->util_fact = 0; -+ ret = of_property_read_u32(dev_node, "qcom,vrail-comp", -+ &node_info->vrail_comp); -+ if (ret) -+ node_info->vrail_comp = 0; -+ get_qos_params(dev_node, pdev, node_info); -+ -+ return node_info; -+ -+node_info_err: -+ devm_kfree(&pdev->dev, node_info); -+ node_info = 0; -+ return NULL; -+} -+ -+static unsigned int get_bus_node_device_data( -+ struct device_node * const dev_node, -+ struct platform_device * const pdev, -+ struct msm_bus_node_device_type * const node_device) -+{ -+ node_device->node_info = get_node_info_data(dev_node, pdev); -+ if (IS_ERR_OR_NULL(node_device->node_info)) { -+ dev_err(&pdev->dev, "Error: Node info missing\n"); -+ return -ENODATA; -+ } -+ node_device->ap_owned = of_property_read_bool(dev_node, -+ "qcom,ap-owned"); -+ -+ if (node_device->node_info->is_fab_dev) { -+ dev_dbg(&pdev->dev, "Dev %d\n", node_device->node_info->id); -+ -+ if (!node_device->node_info->virt_dev) { -+ node_device->fabdev = -+ get_fab_device_info(dev_node, pdev); -+ if (IS_ERR_OR_NULL(node_device->fabdev)) { -+ dev_err(&pdev->dev, -+ "Error: Fabric device info missing\n"); -+ devm_kfree(&pdev->dev, node_device->node_info); -+ return -ENODATA; -+ } -+ } -+ node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node, -+ "bus_clk"); -+ -+ if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk)) -+ dev_dbg(&pdev->dev, -+ "%s:Failed to get bus clk for bus%d ctx%d", -+ __func__, node_device->node_info->id, -+ DUAL_CTX); -+ -+ node_device->clk[ACTIVE_CTX].clk = of_clk_get_by_name(dev_node, -+ "bus_a_clk"); -+ if (IS_ERR_OR_NULL(node_device->clk[ACTIVE_CTX].clk)) -+ dev_err(&pdev->dev, -+ "Failed to get bus clk for bus%d ctx%d", -+ node_device->node_info->id, ACTIVE_CTX); -+ if (msmbus_coresight_init_adhoc(pdev, dev_node)) -+ dev_warn(&pdev->dev, -+ "Coresight support absent for bus: %d\n", -+ node_device->node_info->id); -+ } else { -+ node_device->qos_clk.clk = of_clk_get_by_name(dev_node, -+ "bus_qos_clk"); -+ -+ if (IS_ERR_OR_NULL(node_device->qos_clk.clk)) -+ dev_dbg(&pdev->dev, -+ "%s:Failed to get bus qos clk for mas%d", -+ __func__, node_device->node_info->id); -+ -+ node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node, -+ "node_clk"); -+ -+ if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk)) -+ dev_dbg(&pdev->dev, -+ "%s:Failed to get bus clk for bus%d ctx%d", -+ __func__, node_device->node_info->id, -+ DUAL_CTX); -+ -+ } -+ return 0; -+} -+ -+struct msm_bus_device_node_registration -+ *msm_bus_of_to_pdata(struct platform_device *pdev) -+{ -+ struct device_node *of_node, *child_node; -+ struct msm_bus_device_node_registration *pdata; -+ unsigned int i = 0, j; -+ unsigned int ret; -+ -+ if (!pdev) { -+ pr_err("Error: Null platform device\n"); -+ return NULL; -+ } -+ -+ of_node = pdev->dev.of_node; -+ -+ pdata = devm_kzalloc(&pdev->dev, -+ sizeof(struct msm_bus_device_node_registration), -+ GFP_KERNEL); -+ if (!pdata) { -+ dev_err(&pdev->dev, -+ "Error: Memory allocation for pdata failed\n"); -+ return NULL; -+ } -+ -+ pdata->num_devices = of_get_child_count(of_node); -+ -+ pdata->info = devm_kzalloc(&pdev->dev, -+ sizeof(struct msm_bus_node_device_type) * -+ pdata->num_devices, GFP_KERNEL); -+ -+ if (!pdata->info) { -+ dev_err(&pdev->dev, -+ "Error: Memory allocation for pdata->info failed\n"); -+ goto node_reg_err; -+ } -+ -+ ret = 0; -+ for_each_child_of_node(of_node, child_node) { -+ ret = get_bus_node_device_data(child_node, pdev, -+ &pdata->info[i]); -+ if (ret) { -+ dev_err(&pdev->dev, "Error: unable to initialize bus nodes\n"); -+ goto node_reg_err_1; -+ } -+ i++; -+ } -+ -+ dev_dbg(&pdev->dev, "bus topology:\n"); -+ for (i = 0; i < pdata->num_devices; i++) { -+ dev_dbg(&pdev->dev, "id %d\nnum_qports %d\nnum_connections %d", -+ pdata->info[i].node_info->id, -+ pdata->info[i].node_info->num_qports, -+ pdata->info[i].node_info->num_connections); -+ dev_dbg(&pdev->dev, "\nbus_device_id %d\n buswidth %d\n", -+ pdata->info[i].node_info->bus_device_id, -+ pdata->info[i].node_info->buswidth); -+ for (j = 0; j < pdata->info[i].node_info->num_connections; -+ j++) { -+ dev_dbg(&pdev->dev, "connection[%d]: %d\n", j, -+ pdata->info[i].node_info->connections[j]); -+ } -+ for (j = 0; j < pdata->info[i].node_info->num_blist; -+ j++) { -+ dev_dbg(&pdev->dev, "black_listed_node[%d]: %d\n", j, -+ pdata->info[i].node_info-> -+ black_listed_connections[j]); -+ } -+ if (pdata->info[i].fabdev) -+ dev_dbg(&pdev->dev, "base_addr %zu\nbus_type %d\n", -+ (size_t)pdata->info[i]. -+ fabdev->pqos_base, -+ pdata->info[i].fabdev->bus_type); -+ } -+ return pdata; -+ -+node_reg_err_1: -+ devm_kfree(&pdev->dev, pdata->info); -+node_reg_err: -+ devm_kfree(&pdev->dev, pdata); -+ pdata = NULL; -+ return NULL; -+} -+ -+static int msm_bus_of_get_ids(struct platform_device *pdev, -+ struct device_node *dev_node, int **dev_ids, -+ int *num_ids, char *prop_name) -+{ -+ int ret = 0; -+ int size, i; -+ struct device_node *rule_node; -+ int *ids = NULL; -+ -+ if (of_get_property(dev_node, prop_name, &size)) { -+ *num_ids = size / sizeof(int); -+ ids = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); -+ } else { -+ dev_err(&pdev->dev, "No rule nodes, skipping node"); -+ ret = -ENXIO; -+ goto exit_get_ids; -+ } -+ -+ *dev_ids = ids; -+ for (i = 0; i < *num_ids; i++) { -+ rule_node = of_parse_phandle(dev_node, prop_name, i); -+ if (IS_ERR_OR_NULL(rule_node)) { -+ dev_err(&pdev->dev, "Can't get rule node id"); -+ ret = -ENXIO; -+ goto err_get_ids; -+ } -+ -+ if (of_property_read_u32(rule_node, "cell-id", -+ &ids[i])) { -+ dev_err(&pdev->dev, "Can't get rule node id"); -+ ret = -ENXIO; -+ goto err_get_ids; -+ } -+ of_node_put(rule_node); -+ } -+exit_get_ids: -+ return ret; -+err_get_ids: -+ devm_kfree(&pdev->dev, ids); -+ of_node_put(rule_node); -+ ids = NULL; -+ return ret; -+} -+ -+int msm_bus_of_get_static_rules(struct platform_device *pdev, -+ struct bus_rule_type **static_rules) -+{ -+ int ret = 0; -+ struct device_node *of_node, *child_node; -+ int num_rules = 0; -+ int rule_idx = 0; -+ int bw_fld = 0; -+ int i; -+ struct bus_rule_type *static_rule = NULL; -+ -+ of_node = pdev->dev.of_node; -+ num_rules = of_get_child_count(of_node); -+ static_rule = devm_kzalloc(&pdev->dev, -+ sizeof(struct bus_rule_type) * num_rules, -+ GFP_KERNEL); -+ -+ if (IS_ERR_OR_NULL(static_rule)) { -+ ret = -ENOMEM; -+ goto exit_static_rules; -+ } -+ -+ *static_rules = static_rule; -+ for_each_child_of_node(of_node, child_node) { -+ ret = msm_bus_of_get_ids(pdev, child_node, -+ &static_rule[rule_idx].src_id, -+ &static_rule[rule_idx].num_src, -+ "qcom,src-nodes"); -+ -+ ret = msm_bus_of_get_ids(pdev, child_node, -+ &static_rule[rule_idx].dst_node, -+ &static_rule[rule_idx].num_dst, -+ "qcom,dest-node"); -+ -+ ret = of_property_read_u32(child_node, "qcom,src-field", -+ &static_rule[rule_idx].src_field); -+ if (ret) { -+ dev_err(&pdev->dev, "src-field missing"); -+ ret = -ENXIO; -+ goto err_static_rules; -+ } -+ -+ ret = of_property_read_u32(child_node, "qcom,src-op", -+ &static_rule[rule_idx].op); -+ if (ret) { -+ dev_err(&pdev->dev, "src-op missing"); -+ ret = -ENXIO; -+ goto err_static_rules; -+ } -+ -+ ret = of_property_read_u32(child_node, "qcom,mode", -+ &static_rule[rule_idx].mode); -+ if (ret) { -+ dev_err(&pdev->dev, "mode missing"); -+ ret = -ENXIO; -+ goto err_static_rules; -+ } -+ -+ ret = of_property_read_u32(child_node, "qcom,thresh", &bw_fld); -+ if (ret) { -+ dev_err(&pdev->dev, "thresh missing"); -+ ret = -ENXIO; -+ goto err_static_rules; -+ } else -+ static_rule[rule_idx].thresh = KBTOB(bw_fld); -+ -+ ret = of_property_read_u32(child_node, "qcom,dest-bw", -+ &bw_fld); -+ if (ret) -+ static_rule[rule_idx].dst_bw = 0; -+ else -+ static_rule[rule_idx].dst_bw = KBTOB(bw_fld); -+ -+ rule_idx++; -+ } -+ ret = rule_idx; -+exit_static_rules: -+ return ret; -+err_static_rules: -+ for (i = 0; i < num_rules; i++) { -+ if (!IS_ERR_OR_NULL(static_rule)) { -+ if (!IS_ERR_OR_NULL(static_rule[i].src_id)) -+ devm_kfree(&pdev->dev, -+ static_rule[i].src_id); -+ if (!IS_ERR_OR_NULL(static_rule[i].dst_node)) -+ devm_kfree(&pdev->dev, -+ static_rule[i].dst_node); -+ devm_kfree(&pdev->dev, static_rule); -+ } -+ } -+ devm_kfree(&pdev->dev, *static_rules); -+ static_rules = NULL; -+ return ret; -+} ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_rules.c -@@ -0,0 +1,624 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include "msm-bus-board.h" -+#include "msm_bus_rules.h" -+#include -+ -+struct node_vote_info { -+ int id; -+ u64 ib; -+ u64 ab; -+ u64 clk; -+}; -+ -+struct rules_def { -+ int rule_id; -+ int num_src; -+ int state; -+ struct node_vote_info *src_info; -+ struct bus_rule_type rule_ops; -+ bool state_change; -+ struct list_head link; -+}; -+ -+struct rule_node_info { -+ int id; -+ void *data; -+ struct raw_notifier_head rule_notify_list; -+ int cur_rule; -+ int num_rules; -+ struct list_head node_rules; -+ struct list_head link; -+ struct rule_apply_rcm_info apply; -+}; -+ -+DEFINE_MUTEX(msm_bus_rules_lock); -+static LIST_HEAD(node_list); -+static struct rule_node_info *get_node(u32 id, void *data); -+ -+#define LE(op1, op2) (op1 <= op2) -+#define LT(op1, op2) (op1 < op2) -+#define GE(op1, op2) (op1 >= op2) -+#define GT(op1, op2) (op1 > op2) -+#define NB_ID (0x201) -+ -+static struct rule_node_info *get_node(u32 id, void *data) -+{ -+ struct rule_node_info *node_it = NULL; -+ struct rule_node_info *node_match = NULL; -+ -+ list_for_each_entry(node_it, &node_list, link) { -+ if (node_it->id == id) { -+ if ((id == NB_ID)) { -+ if ((node_it->data == data)) { -+ node_match = node_it; -+ break; -+ } -+ } else { -+ node_match = node_it; -+ break; -+ } -+ } -+ } -+ return node_match; -+} -+ -+static struct rule_node_info *gen_node(u32 id, void *data) -+{ -+ struct rule_node_info *node_it = NULL; -+ struct rule_node_info *node_match = NULL; -+ -+ list_for_each_entry(node_it, &node_list, link) { -+ if (node_it->id == id) { -+ node_match = node_it; -+ break; -+ } -+ } -+ -+ if (!node_match) { -+ node_match = kzalloc(sizeof(struct rule_node_info), GFP_KERNEL); -+ if (!node_match) { -+ pr_err("%s: Cannot allocate memory", __func__); -+ goto exit_node_match; -+ } -+ -+ node_match->id = id; -+ node_match->cur_rule = -1; -+ node_match->num_rules = 0; -+ node_match->data = data; -+ list_add_tail(&node_match->link, &node_list); -+ INIT_LIST_HEAD(&node_match->node_rules); -+ RAW_INIT_NOTIFIER_HEAD(&node_match->rule_notify_list); -+ pr_debug("Added new node %d to list\n", id); -+ } -+exit_node_match: -+ return node_match; -+} -+ -+static bool do_compare_op(u64 op1, u64 op2, int op) -+{ -+ bool ret = false; -+ -+ switch (op) { -+ case OP_LE: -+ ret = LE(op1, op2); -+ break; -+ case OP_LT: -+ ret = LT(op1, op2); -+ break; -+ case OP_GT: -+ ret = GT(op1, op2); -+ break; -+ case OP_GE: -+ ret = GE(op1, op2); -+ break; -+ case OP_NOOP: -+ ret = true; -+ break; -+ default: -+ pr_info("Invalid OP %d", op); -+ break; -+ } -+ return ret; -+} -+ -+static void update_src_id_vote(struct rule_update_path_info *inp_node, -+ struct rule_node_info *rule_node) -+{ -+ struct rules_def *rule; -+ int i; -+ -+ list_for_each_entry(rule, &rule_node->node_rules, link) { -+ for (i = 0; i < rule->num_src; i++) { -+ if (rule->src_info[i].id == inp_node->id) { -+ rule->src_info[i].ib = inp_node->ib; -+ rule->src_info[i].ab = inp_node->ab; -+ rule->src_info[i].clk = inp_node->clk; -+ } -+ } -+ } -+} -+ -+static u64 get_field(struct rules_def *rule, int src_id) -+{ -+ u64 field = 0; -+ int i; -+ -+ for (i = 0; i < rule->num_src; i++) { -+ switch (rule->rule_ops.src_field) { -+ case FLD_IB: -+ field += rule->src_info[i].ib; -+ break; -+ case FLD_AB: -+ field += rule->src_info[i].ab; -+ break; -+ case FLD_CLK: -+ field += rule->src_info[i].clk; -+ break; -+ } -+ } -+ -+ return field; -+} -+ -+static bool check_rule(struct rules_def *rule, -+ struct rule_update_path_info *inp) -+{ -+ bool ret = false; -+ -+ if (!rule) -+ return ret; -+ -+ switch (rule->rule_ops.op) { -+ case OP_LE: -+ case OP_LT: -+ case OP_GT: -+ case OP_GE: -+ { -+ u64 src_field = get_field(rule, inp->id); -+ if (!src_field) -+ ret = false; -+ else -+ ret = do_compare_op(src_field, rule->rule_ops.thresh, -+ rule->rule_ops.op); -+ break; -+ } -+ default: -+ pr_err("Unsupported op %d", rule->rule_ops.op); -+ break; -+ } -+ return ret; -+} -+ -+static void match_rule(struct rule_update_path_info *inp_node, -+ struct rule_node_info *node) -+{ -+ struct rules_def *rule; -+ int i; -+ -+ list_for_each_entry(rule, &node->node_rules, link) { -+ for (i = 0; i < rule->num_src; i++) { -+ if (rule->src_info[i].id == inp_node->id) { -+ if (check_rule(rule, inp_node)) { -+ trace_bus_rules_matches(node->cur_rule, -+ inp_node->id, inp_node->ab, -+ inp_node->ib, inp_node->clk); -+ if (rule->state == -+ RULE_STATE_NOT_APPLIED) -+ rule->state_change = true; -+ rule->state = RULE_STATE_APPLIED; -+ } else { -+ if (rule->state == -+ RULE_STATE_APPLIED) -+ rule->state_change = true; -+ rule->state = RULE_STATE_NOT_APPLIED; -+ } -+ } -+ } -+ } -+} -+ -+static void apply_rule(struct rule_node_info *node, -+ struct list_head *output_list) -+{ -+ struct rules_def *rule; -+ -+ node->cur_rule = -1; -+ list_for_each_entry(rule, &node->node_rules, link) { -+ if ((rule->state == RULE_STATE_APPLIED) && -+ (node->cur_rule == -1)) -+ node->cur_rule = rule->rule_id; -+ -+ if (node->id == NB_ID) { -+ if (rule->state_change) { -+ rule->state_change = false; -+ raw_notifier_call_chain(&node->rule_notify_list, -+ rule->state, (void *)&rule->rule_ops); -+ } -+ } else { -+ if ((rule->state == RULE_STATE_APPLIED) && -+ (node->cur_rule == rule->rule_id)) { -+ node->apply.id = rule->rule_ops.dst_node[0]; -+ node->apply.throttle = rule->rule_ops.mode; -+ node->apply.lim_bw = rule->rule_ops.dst_bw; -+ list_add_tail(&node->apply.link, output_list); -+ } -+ rule->state_change = false; -+ } -+ } -+ -+} -+ -+int msm_rules_update_path(struct list_head *input_list, -+ struct list_head *output_list) -+{ -+ int ret = 0; -+ struct rule_update_path_info *inp_node; -+ struct rule_node_info *node_it = NULL; -+ -+ mutex_lock(&msm_bus_rules_lock); -+ list_for_each_entry(inp_node, input_list, link) { -+ list_for_each_entry(node_it, &node_list, link) { -+ update_src_id_vote(inp_node, node_it); -+ match_rule(inp_node, node_it); -+ } -+ } -+ -+ list_for_each_entry(node_it, &node_list, link) -+ apply_rule(node_it, output_list); -+ -+ mutex_unlock(&msm_bus_rules_lock); -+ return ret; -+} -+ -+static bool ops_equal(int op1, int op2) -+{ -+ bool ret = false; -+ -+ switch (op1) { -+ case OP_GT: -+ case OP_GE: -+ case OP_LT: -+ case OP_LE: -+ if (abs(op1 - op2) <= 1) -+ ret = true; -+ break; -+ default: -+ ret = (op1 == op2); -+ } -+ -+ return ret; -+} -+ -+static int node_rules_compare(void *priv, struct list_head *a, -+ struct list_head *b) -+{ -+ struct rules_def *ra = container_of(a, struct rules_def, link); -+ struct rules_def *rb = container_of(b, struct rules_def, link); -+ int ret = -1; -+ int64_t th_diff = 0; -+ -+ -+ if (ra->rule_ops.mode == rb->rule_ops.mode) { -+ if (ops_equal(ra->rule_ops.op, rb->rule_ops.op)) { -+ if ((ra->rule_ops.op == OP_LT) || -+ (ra->rule_ops.op == OP_LE)) { -+ th_diff = ra->rule_ops.thresh - -+ rb->rule_ops.thresh; -+ if (th_diff > 0) -+ ret = 1; -+ else -+ ret = -1; -+ } else if ((ra->rule_ops.op == OP_GT) || -+ (ra->rule_ops.op == OP_GE)) { -+ th_diff = rb->rule_ops.thresh - -+ ra->rule_ops.thresh; -+ if (th_diff > 0) -+ ret = 1; -+ else -+ ret = -1; -+ } -+ } else -+ ret = ra->rule_ops.op - rb->rule_ops.op; -+ } else if ((ra->rule_ops.mode == THROTTLE_OFF) && -+ (rb->rule_ops.mode == THROTTLE_ON)) { -+ ret = 1; -+ } else if ((ra->rule_ops.mode == THROTTLE_ON) && -+ (rb->rule_ops.mode == THROTTLE_OFF)) { -+ ret = -1; -+ } -+ -+ return ret; -+} -+ -+static void print_rules(struct rule_node_info *node_it) -+{ -+ struct rules_def *node_rule = NULL; -+ int i; -+ -+ if (!node_it) { -+ pr_err("%s: no node for found", __func__); -+ return; -+ } -+ -+ pr_info("\n Now printing rules for Node %d cur rule %d\n", -+ node_it->id, node_it->cur_rule); -+ list_for_each_entry(node_rule, &node_it->node_rules, link) { -+ pr_info("\n num Rules %d rule Id %d\n", -+ node_it->num_rules, node_rule->rule_id); -+ pr_info("Rule: src_field %d\n", node_rule->rule_ops.src_field); -+ for (i = 0; i < node_rule->rule_ops.num_src; i++) -+ pr_info("Rule: src %d\n", -+ node_rule->rule_ops.src_id[i]); -+ for (i = 0; i < node_rule->rule_ops.num_dst; i++) -+ pr_info("Rule: dst %d dst_bw %llu\n", -+ node_rule->rule_ops.dst_node[i], -+ node_rule->rule_ops.dst_bw); -+ pr_info("Rule: thresh %llu op %d mode %d State %d\n", -+ node_rule->rule_ops.thresh, -+ node_rule->rule_ops.op, -+ node_rule->rule_ops.mode, -+ node_rule->state); -+ } -+} -+ -+void print_all_rules(void) -+{ -+ struct rule_node_info *node_it = NULL; -+ -+ list_for_each_entry(node_it, &node_list, link) -+ print_rules(node_it); -+} -+ -+void print_rules_buf(char *buf, int max_buf) -+{ -+ struct rule_node_info *node_it = NULL; -+ struct rules_def *node_rule = NULL; -+ int i; -+ int cnt = 0; -+ -+ list_for_each_entry(node_it, &node_list, link) { -+ cnt += scnprintf(buf + cnt, max_buf - cnt, -+ "\n Now printing rules for Node %d cur_rule %d\n", -+ node_it->id, node_it->cur_rule); -+ list_for_each_entry(node_rule, &node_it->node_rules, link) { -+ cnt += scnprintf(buf + cnt, max_buf - cnt, -+ "\nNum Rules:%d ruleId %d STATE:%d change:%d\n", -+ node_it->num_rules, node_rule->rule_id, -+ node_rule->state, node_rule->state_change); -+ cnt += scnprintf(buf + cnt, max_buf - cnt, -+ "Src_field %d\n", -+ node_rule->rule_ops.src_field); -+ for (i = 0; i < node_rule->rule_ops.num_src; i++) -+ cnt += scnprintf(buf + cnt, max_buf - cnt, -+ "Src %d Cur Ib %llu Ab %llu\n", -+ node_rule->rule_ops.src_id[i], -+ node_rule->src_info[i].ib, -+ node_rule->src_info[i].ab); -+ for (i = 0; i < node_rule->rule_ops.num_dst; i++) -+ cnt += scnprintf(buf + cnt, max_buf - cnt, -+ "Dst %d dst_bw %llu\n", -+ node_rule->rule_ops.dst_node[0], -+ node_rule->rule_ops.dst_bw); -+ cnt += scnprintf(buf + cnt, max_buf - cnt, -+ "Thresh %llu op %d mode %d\n", -+ node_rule->rule_ops.thresh, -+ node_rule->rule_ops.op, -+ node_rule->rule_ops.mode); -+ } -+ } -+} -+ -+static int copy_rule(struct bus_rule_type *src, struct rules_def *node_rule, -+ struct notifier_block *nb) -+{ -+ int i; -+ int ret = 0; -+ -+ memcpy(&node_rule->rule_ops, src, -+ sizeof(struct bus_rule_type)); -+ node_rule->rule_ops.src_id = kzalloc( -+ (sizeof(int) * node_rule->rule_ops.num_src), -+ GFP_KERNEL); -+ if (!node_rule->rule_ops.src_id) { -+ pr_err("%s:Failed to allocate for src_id", -+ __func__); -+ return -ENOMEM; -+ } -+ memcpy(node_rule->rule_ops.src_id, src->src_id, -+ sizeof(int) * src->num_src); -+ -+ -+ if (!nb) { -+ node_rule->rule_ops.dst_node = kzalloc( -+ (sizeof(int) * node_rule->rule_ops.num_dst), -+ GFP_KERNEL); -+ if (!node_rule->rule_ops.dst_node) { -+ pr_err("%s:Failed to allocate for src_id", -+ __func__); -+ return -ENOMEM; -+ } -+ memcpy(node_rule->rule_ops.dst_node, src->dst_node, -+ sizeof(int) * src->num_dst); -+ } -+ -+ node_rule->num_src = src->num_src; -+ node_rule->src_info = kzalloc( -+ (sizeof(struct node_vote_info) * node_rule->rule_ops.num_src), -+ GFP_KERNEL); -+ if (!node_rule->src_info) { -+ pr_err("%s:Failed to allocate for src_id", -+ __func__); -+ return -ENOMEM; -+ } -+ for (i = 0; i < src->num_src; i++) -+ node_rule->src_info[i].id = src->src_id[i]; -+ -+ return ret; -+} -+ -+void msm_rule_register(int num_rules, struct bus_rule_type *rule, -+ struct notifier_block *nb) -+{ -+ struct rule_node_info *node = NULL; -+ int i, j; -+ struct rules_def *node_rule = NULL; -+ int num_dst = 0; -+ -+ if (!rule) -+ return; -+ -+ mutex_lock(&msm_bus_rules_lock); -+ for (i = 0; i < num_rules; i++) { -+ if (nb) -+ num_dst = 1; -+ else -+ num_dst = rule[i].num_dst; -+ -+ for (j = 0; j < num_dst; j++) { -+ int id = 0; -+ -+ if (nb) -+ id = NB_ID; -+ else -+ id = rule[i].dst_node[j]; -+ -+ node = gen_node(id, nb); -+ if (!node) { -+ pr_info("Error getting rule"); -+ goto exit_rule_register; -+ } -+ node_rule = kzalloc(sizeof(struct rules_def), -+ GFP_KERNEL); -+ if (!node_rule) { -+ pr_err("%s: Failed to allocate for rule", -+ __func__); -+ goto exit_rule_register; -+ } -+ -+ if (copy_rule(&rule[i], node_rule, nb)) { -+ pr_err("Error copying rule"); -+ goto exit_rule_register; -+ } -+ -+ node_rule->rule_id = node->num_rules++; -+ if (nb) -+ node->data = nb; -+ -+ list_add_tail(&node_rule->link, &node->node_rules); -+ } -+ } -+ list_sort(NULL, &node->node_rules, node_rules_compare); -+ -+ if (nb) -+ raw_notifier_chain_register(&node->rule_notify_list, nb); -+exit_rule_register: -+ mutex_unlock(&msm_bus_rules_lock); -+ return; -+} -+ -+static int comp_rules(struct bus_rule_type *rulea, struct bus_rule_type *ruleb) -+{ -+ int ret = 1; -+ -+ if (rulea->num_src == ruleb->num_src) -+ ret = memcmp(rulea->src_id, ruleb->src_id, -+ (sizeof(int) * rulea->num_src)); -+ if (!ret && (rulea->num_dst == ruleb->num_dst)) -+ ret = memcmp(rulea->dst_node, ruleb->dst_node, -+ (sizeof(int) * rulea->num_dst)); -+ if (!ret && (rulea->dst_bw == ruleb->dst_bw) && -+ (rulea->op == ruleb->op) && (rulea->thresh == ruleb->thresh)) -+ ret = 0; -+ -+ return ret; -+} -+ -+void msm_rule_unregister(int num_rules, struct bus_rule_type *rule, -+ struct notifier_block *nb) -+{ -+ int i; -+ struct rule_node_info *node = NULL; -+ struct rule_node_info *node_tmp = NULL; -+ struct rules_def *node_rule; -+ struct rules_def *node_rule_tmp; -+ bool match_found = false; -+ -+ if (!rule) -+ return; -+ -+ mutex_lock(&msm_bus_rules_lock); -+ if (nb) { -+ node = get_node(NB_ID, nb); -+ if (!node) { -+ pr_err("%s: Can't find node", __func__); -+ goto exit_unregister_rule; -+ } -+ -+ list_for_each_entry_safe(node_rule, node_rule_tmp, -+ &node->node_rules, link) { -+ list_del(&node_rule->link); -+ kfree(node_rule); -+ node->num_rules--; -+ } -+ raw_notifier_chain_unregister(&node->rule_notify_list, nb); -+ } else { -+ for (i = 0; i < num_rules; i++) { -+ match_found = false; -+ -+ list_for_each_entry(node, &node_list, link) { -+ list_for_each_entry_safe(node_rule, -+ node_rule_tmp, &node->node_rules, link) { -+ if (comp_rules(&node_rule->rule_ops, -+ &rule[i]) == 0) { -+ list_del(&node_rule->link); -+ kfree(node_rule); -+ match_found = true; -+ node->num_rules--; -+ list_sort(NULL, -+ &node->node_rules, -+ node_rules_compare); -+ break; -+ } -+ } -+ } -+ } -+ } -+ -+ list_for_each_entry_safe(node, node_tmp, -+ &node_list, link) { -+ if (!node->num_rules) { -+ pr_debug("Deleting Rule node %d", node->id); -+ list_del(&node->link); -+ kfree(node); -+ } -+ } -+exit_unregister_rule: -+ mutex_unlock(&msm_bus_rules_lock); -+} -+ -+bool msm_rule_are_rules_registered(void) -+{ -+ bool ret = false; -+ -+ if (list_empty(&node_list)) -+ ret = false; -+ else -+ ret = true; -+ -+ return ret; -+} -+ ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_bus_rules.h -@@ -0,0 +1,77 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef _ARCH_ARM_MACH_MSM_BUS_RULES_H -+#define _ARCH_ARM_MACH_MSM_BUS_RULES_H -+ -+#include -+#include -+#include -+#include -+ -+#define MAX_NODES (5) -+ -+struct rule_update_path_info { -+ u32 id; -+ u64 ab; -+ u64 ib; -+ u64 clk; -+ struct list_head link; -+}; -+ -+struct rule_apply_rcm_info { -+ u32 id; -+ u64 lim_bw; -+ int throttle; -+ bool after_clk_commit; -+ struct list_head link; -+}; -+ -+struct bus_rule_type { -+ int num_src; -+ int *src_id; -+ int src_field; -+ int op; -+ u64 thresh; -+ int num_dst; -+ int *dst_node; -+ u64 dst_bw; -+ int mode; -+ void *client_data; -+}; -+ -+#if (defined(CONFIG_BUS_TOPOLOGY_ADHOC)) -+void msm_rule_register(int num_rules, struct bus_rule_type *rule, -+ struct notifier_block *nb); -+void msm_rule_unregister(int num_rules, struct bus_rule_type *rule, -+ struct notifier_block *nb); -+void print_rules_buf(char *buf, int count); -+bool msm_rule_are_rules_registered(void); -+#else -+static inline void msm_rule_register(int num_rules, struct bus_rule_type *rule, -+ struct notifier_block *nb) -+{ -+} -+static inline void msm_rule_unregister(int num_rules, -+ struct bus_rule_type *rule, -+ struct notifier_block *nb) -+{ -+} -+static inline void print_rules_buf(char *buf, int count) -+{ -+} -+static inline bool msm_rule_are_rules_registered(void) -+{ -+ return false; -+} -+#endif /* defined(CONFIG_BUS_TOPOLOGY_ADHOC) */ -+#endif /* _ARCH_ARM_MACH_MSM_BUS_RULES_H */ ---- /dev/null -+++ b/drivers/bus/msm_bus/msm_buspm_coresight_adhoc.c -@@ -0,0 +1,189 @@ -+/* Copyright (c) 2014 The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct msmbus_coresight_adhoc_clock_drvdata { -+ int id; -+ struct clk *clk; -+ struct list_head list; -+}; -+ -+struct msmbus_coresight_adhoc_drvdata { -+ struct device *dev; -+ struct coresight_device *csdev; -+ struct coresight_desc *desc; -+ struct list_head clocks; -+}; -+ -+static int msmbus_coresight_enable_adhoc(struct coresight_device *csdev) -+{ -+ struct msmbus_coresight_adhoc_clock_drvdata *clk; -+ struct msmbus_coresight_adhoc_drvdata *drvdata = -+ dev_get_drvdata(csdev->dev.parent); -+ long rate; -+ -+ list_for_each_entry(clk, &drvdata->clocks, list) { -+ if (clk->id == csdev->id) { -+ rate = clk_round_rate(clk->clk, 1L); -+ clk_set_rate(clk->clk, rate); -+ return clk_prepare_enable(clk->clk); -+ } -+ } -+ -+ return -ENOENT; -+} -+ -+static void msmbus_coresight_disable_adhoc(struct coresight_device *csdev) -+{ -+ struct msmbus_coresight_adhoc_clock_drvdata *clk; -+ struct msmbus_coresight_adhoc_drvdata *drvdata = -+ dev_get_drvdata(csdev->dev.parent); -+ -+ list_for_each_entry(clk, &drvdata->clocks, list) { -+ if (clk->id == csdev->id) -+ clk_disable_unprepare(clk->clk); -+ } -+} -+ -+static const struct coresight_ops_source msmbus_coresight_adhoc_source_ops = { -+ .enable = msmbus_coresight_enable_adhoc, -+ .disable = msmbus_coresight_disable_adhoc, -+}; -+ -+static const struct coresight_ops msmbus_coresight_cs_ops = { -+ .source_ops = &msmbus_coresight_adhoc_source_ops, -+}; -+ -+void msmbus_coresight_remove_adhoc(struct platform_device *pdev) -+{ -+ struct msmbus_coresight_adhoc_clock_drvdata *clk, *next_clk; -+ struct msmbus_coresight_adhoc_drvdata *drvdata = -+ platform_get_drvdata(pdev); -+ -+ msmbus_coresight_disable_adhoc(drvdata->csdev); -+ coresight_unregister(drvdata->csdev); -+ list_for_each_entry_safe(clk, next_clk, &drvdata->clocks, list) { -+ list_del(&clk->list); -+ devm_kfree(&pdev->dev, clk); -+ } -+ devm_kfree(&pdev->dev, drvdata->desc); -+ devm_kfree(&pdev->dev, drvdata); -+ platform_set_drvdata(pdev, NULL); -+} -+EXPORT_SYMBOL(msmbus_coresight_remove_adhoc); -+ -+static int buspm_of_get_clk_adhoc(struct device_node *of_node, -+ struct msmbus_coresight_adhoc_drvdata *drvdata, int id) -+{ -+ struct msmbus_coresight_adhoc_clock_drvdata *clk; -+ clk = devm_kzalloc(drvdata->dev, sizeof(*clk), GFP_KERNEL); -+ -+ if (!clk) -+ return -ENOMEM; -+ -+ clk->id = id; -+ -+ clk->clk = of_clk_get_by_name(of_node, "bus_clk"); -+ if (IS_ERR(clk->clk)) { -+ pr_err("Error: unable to get clock for coresight node %d\n", -+ id); -+ goto err; -+ } -+ -+ list_add(&clk->list, &drvdata->clocks); -+ return 0; -+ -+err: -+ devm_kfree(drvdata->dev, clk); -+ return -EINVAL; -+} -+ -+int msmbus_coresight_init_adhoc(struct platform_device *pdev, -+ struct device_node *of_node) -+{ -+ int ret; -+ struct device *dev = &pdev->dev; -+ struct coresight_platform_data *pdata; -+ struct msmbus_coresight_adhoc_drvdata *drvdata; -+ struct coresight_desc *desc; -+ -+ pdata = of_get_coresight_platform_data(dev, of_node); -+ if (IS_ERR(pdata)) -+ return PTR_ERR(pdata); -+ -+ drvdata = platform_get_drvdata(pdev); -+ if (IS_ERR_OR_NULL(drvdata)) { -+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); -+ if (!drvdata) { -+ pr_err("coresight: Alloc for drvdata failed\n"); -+ return -ENOMEM; -+ } -+ INIT_LIST_HEAD(&drvdata->clocks); -+ drvdata->dev = &pdev->dev; -+ platform_set_drvdata(pdev, drvdata); -+ } -+ ret = buspm_of_get_clk_adhoc(of_node, drvdata, pdata->id); -+ if (ret) { -+ pr_err("Error getting clocks\n"); -+ ret = -ENXIO; -+ goto err1; -+ } -+ -+ desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL); -+ if (!desc) { -+ pr_err("coresight: Error allocating memory\n"); -+ ret = -ENOMEM; -+ goto err1; -+ } -+ -+ desc->type = CORESIGHT_DEV_TYPE_SOURCE; -+ desc->subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_BUS; -+ desc->ops = &msmbus_coresight_cs_ops; -+ desc->pdata = pdata; -+ desc->dev = &pdev->dev; -+ desc->owner = THIS_MODULE; -+ drvdata->desc = desc; -+ drvdata->csdev = coresight_register(desc); -+ if (IS_ERR(drvdata->csdev)) { -+ pr_err("coresight: Coresight register failed\n"); -+ ret = PTR_ERR(drvdata->csdev); -+ goto err0; -+ } -+ -+ dev_info(dev, "msmbus_coresight initialized\n"); -+ -+ return 0; -+err0: -+ devm_kfree(dev, desc); -+err1: -+ devm_kfree(dev, drvdata); -+ platform_set_drvdata(pdev, NULL); -+ return ret; -+} -+EXPORT_SYMBOL(msmbus_coresight_init_adhoc); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("MSM BusPM Adhoc CoreSight Driver"); ---- /dev/null -+++ b/drivers/bus/msm_bus/rpm-smd.h -@@ -0,0 +1,268 @@ -+/* Copyright (c) 2012, 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+ -+#ifndef __ARCH_ARM_MACH_MSM_RPM_SMD_H -+#define __ARCH_ARM_MACH_MSM_RPM_SMD_H -+ -+/** -+ * enum msm_rpm_set - RPM enumerations for sleep/active set -+ * %MSM_RPM_CTX_SET_0: Set resource parameters for active mode. -+ * %MSM_RPM_CTX_SET_SLEEP: Set resource parameters for sleep. -+ */ -+enum msm_rpm_set { -+ MSM_RPM_CTX_ACTIVE_SET, -+ MSM_RPM_CTX_SLEEP_SET, -+}; -+ -+struct msm_rpm_request; -+ -+struct msm_rpm_kvp { -+ uint32_t key; -+ uint32_t length; -+ uint8_t *data; -+}; -+#ifdef CONFIG_MSM_RPM_SMD -+/** -+ * msm_rpm_request() - Creates a parent element to identify the -+ * resource on the RPM, that stores the KVPs for different fields modified -+ * for a hardware resource -+ * -+ * @set: if the device is setting the active/sleep set parameter -+ * for the resource -+ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource -+ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type -+ * @num_elements: number of KVPs pairs associated with the resource -+ * -+ * returns pointer to a msm_rpm_request on success, NULL on error -+ */ -+struct msm_rpm_request *msm_rpm_create_request( -+ enum msm_rpm_set set, uint32_t rsc_type, -+ uint32_t rsc_id, int num_elements); -+ -+/** -+ * msm_rpm_request_noirq() - Creates a parent element to identify the -+ * resource on the RPM, that stores the KVPs for different fields modified -+ * for a hardware resource. This function is similar to msm_rpm_create_request -+ * except that it has to be called with interrupts masked. -+ * -+ * @set: if the device is setting the active/sleep set parameter -+ * for the resource -+ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource -+ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type -+ * @num_elements: number of KVPs pairs associated with the resource -+ * -+ * returns pointer to a msm_rpm_request on success, NULL on error -+ */ -+struct msm_rpm_request *msm_rpm_create_request_noirq( -+ enum msm_rpm_set set, uint32_t rsc_type, -+ uint32_t rsc_id, int num_elements); -+ -+/** -+ * msm_rpm_add_kvp_data() - Adds a Key value pair to a existing RPM resource. -+ * -+ * @handle: RPM resource handle to which the data should be appended -+ * @key: unsigned integer identify the parameter modified -+ * @data: byte array that contains the value corresponding to key. -+ * @size: size of data in bytes. -+ * -+ * returns 0 on success or errno -+ */ -+int msm_rpm_add_kvp_data(struct msm_rpm_request *handle, -+ uint32_t key, const uint8_t *data, int size); -+ -+/** -+ * msm_rpm_add_kvp_data_noirq() - Adds a Key value pair to a existing RPM -+ * resource. This function is similar to msm_rpm_add_kvp_data except that it -+ * has to be called with interrupts masked. -+ * -+ * @handle: RPM resource handle to which the data should be appended -+ * @key: unsigned integer identify the parameter modified -+ * @data: byte array that contains the value corresponding to key. -+ * @size: size of data in bytes. -+ * -+ * returns 0 on success or errno -+ */ -+int msm_rpm_add_kvp_data_noirq(struct msm_rpm_request *handle, -+ uint32_t key, const uint8_t *data, int size); -+ -+/** msm_rpm_free_request() - clean up the RPM request handle created with -+ * msm_rpm_create_request -+ * -+ * @handle: RPM resource handle to be cleared. -+ */ -+ -+void msm_rpm_free_request(struct msm_rpm_request *handle); -+ -+/** -+ * msm_rpm_send_request() - Send the RPM messages using SMD. The function -+ * assigns a message id before sending the data out to the RPM. RPM hardware -+ * uses the message id to acknowledge the messages. -+ * -+ * @handle: pointer to the msm_rpm_request for the resource being modified. -+ * -+ * returns non-zero message id on success and zero on a failed transaction. -+ * The drivers use message id to wait for ACK from RPM. -+ */ -+int msm_rpm_send_request(struct msm_rpm_request *handle); -+ -+/** -+ * msm_rpm_send_request_noirq() - Send the RPM messages using SMD. The -+ * function assigns a message id before sending the data out to the RPM. -+ * RPM hardware uses the message id to acknowledge the messages. This function -+ * is similar to msm_rpm_send_request except that it has to be called with -+ * interrupts masked. -+ * -+ * @handle: pointer to the msm_rpm_request for the resource being modified. -+ * -+ * returns non-zero message id on success and zero on a failed transaction. -+ * The drivers use message id to wait for ACK from RPM. -+ */ -+int msm_rpm_send_request_noirq(struct msm_rpm_request *handle); -+ -+/** -+ * msm_rpm_wait_for_ack() - A blocking call that waits for acknowledgment of -+ * a message from RPM. -+ * -+ * @msg_id: the return from msm_rpm_send_requests -+ * -+ * returns 0 on success or errno -+ */ -+int msm_rpm_wait_for_ack(uint32_t msg_id); -+ -+/** -+ * msm_rpm_wait_for_ack_noirq() - A blocking call that waits for acknowledgment -+ * of a message from RPM. This function is similar to msm_rpm_wait_for_ack -+ * except that it has to be called with interrupts masked. -+ * -+ * @msg_id: the return from msm_rpm_send_request -+ * -+ * returns 0 on success or errno -+ */ -+int msm_rpm_wait_for_ack_noirq(uint32_t msg_id); -+ -+/** -+ * msm_rpm_send_message() -Wrapper function for clients to send data given an -+ * array of key value pairs. -+ * -+ * @set: if the device is setting the active/sleep set parameter -+ * for the resource -+ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource -+ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type -+ * @kvp: array of KVP data. -+ * @nelem: number of KVPs pairs associated with the message. -+ * -+ * returns 0 on success and errno on failure. -+ */ -+int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type, -+ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems); -+ -+/** -+ * msm_rpm_send_message_noirq() -Wrapper function for clients to send data -+ * given an array of key value pairs. This function is similar to the -+ * msm_rpm_send_message() except that it has to be called with interrupts -+ * disabled. Clients should choose the irq version when possible for system -+ * performance. -+ * -+ * @set: if the device is setting the active/sleep set parameter -+ * for the resource -+ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource -+ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type -+ * @kvp: array of KVP data. -+ * @nelem: number of KVPs pairs associated with the message. -+ * -+ * returns 0 on success and errno on failure. -+ */ -+int msm_rpm_send_message_noirq(enum msm_rpm_set set, uint32_t rsc_type, -+ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems); -+ -+/** -+ * msm_rpm_driver_init() - Initialization function that registers for a -+ * rpm platform driver. -+ * -+ * returns 0 on success. -+ */ -+int __init msm_rpm_driver_init(void); -+ -+#else -+ -+static inline struct msm_rpm_request *msm_rpm_create_request( -+ enum msm_rpm_set set, uint32_t rsc_type, -+ uint32_t rsc_id, int num_elements) -+{ -+ return NULL; -+} -+ -+static inline struct msm_rpm_request *msm_rpm_create_request_noirq( -+ enum msm_rpm_set set, uint32_t rsc_type, -+ uint32_t rsc_id, int num_elements) -+{ -+ return NULL; -+ -+} -+static inline uint32_t msm_rpm_add_kvp_data(struct msm_rpm_request *handle, -+ uint32_t key, const uint8_t *data, int count) -+{ -+ return 0; -+} -+static inline uint32_t msm_rpm_add_kvp_data_noirq( -+ struct msm_rpm_request *handle, uint32_t key, -+ const uint8_t *data, int count) -+{ -+ return 0; -+} -+ -+static inline void msm_rpm_free_request(struct msm_rpm_request *handle) -+{ -+ return; -+} -+ -+static inline int msm_rpm_send_request(struct msm_rpm_request *handle) -+{ -+ return 0; -+} -+ -+static inline int msm_rpm_send_request_noirq(struct msm_rpm_request *handle) -+{ -+ return 0; -+ -+} -+ -+static inline int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type, -+ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems) -+{ -+ return 0; -+} -+ -+static inline int msm_rpm_send_message_noirq(enum msm_rpm_set set, -+ uint32_t rsc_type, uint32_t rsc_id, struct msm_rpm_kvp *kvp, -+ int nelems) -+{ -+ return 0; -+} -+ -+static inline int msm_rpm_wait_for_ack(uint32_t msg_id) -+{ -+ return 0; -+ -+} -+static inline int msm_rpm_wait_for_ack_noirq(uint32_t msg_id) -+{ -+ return 0; -+} -+ -+static inline int __init msm_rpm_driver_init(void) -+{ -+ return 0; -+} -+#endif -+#endif /*__ARCH_ARM_MACH_MSM_RPM_SMD_H*/ ---- /dev/null -+++ b/include/trace/events/trace_msm_bus.h -@@ -0,0 +1,163 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#undef TRACE_SYSTEM -+#define TRACE_SYSTEM msm_bus -+ -+#if !defined(_TRACE_MSM_BUS_H) || defined(TRACE_HEADER_MULTI_READ) -+#define _TRACE_MSM_BUS_H -+ -+#include -+ -+TRACE_EVENT(bus_update_request, -+ -+ TP_PROTO(int sec, int nsec, const char *name, unsigned int index, -+ int src, int dest, unsigned long long ab, -+ unsigned long long ib), -+ -+ TP_ARGS(sec, nsec, name, index, src, dest, ab, ib), -+ -+ TP_STRUCT__entry( -+ __field(int, sec) -+ __field(int, nsec) -+ __string(name, name) -+ __field(u32, index) -+ __field(int, src) -+ __field(int, dest) -+ __field(u64, ab) -+ __field(u64, ib) -+ ), -+ -+ TP_fast_assign( -+ __entry->sec = sec; -+ __entry->nsec = nsec; -+ __assign_str(name, name); -+ __entry->index = index; -+ __entry->src = src; -+ __entry->dest = dest; -+ __entry->ab = ab; -+ __entry->ib = ib; -+ ), -+ -+ TP_printk("time= %d.%d name=%s index=%u src=%d dest=%d ab=%llu ib=%llu", -+ __entry->sec, -+ __entry->nsec, -+ __get_str(name), -+ (unsigned int)__entry->index, -+ __entry->src, -+ __entry->dest, -+ (unsigned long long)__entry->ab, -+ (unsigned long long)__entry->ib) -+); -+ -+TRACE_EVENT(bus_bimc_config_limiter, -+ -+ TP_PROTO(int mas_id, unsigned long long cur_lim_bw), -+ -+ TP_ARGS(mas_id, cur_lim_bw), -+ -+ TP_STRUCT__entry( -+ __field(int, mas_id) -+ __field(u64, cur_lim_bw) -+ ), -+ -+ TP_fast_assign( -+ __entry->mas_id = mas_id; -+ __entry->cur_lim_bw = cur_lim_bw; -+ ), -+ -+ TP_printk("Master=%d cur_lim_bw=%llu", -+ __entry->mas_id, -+ (unsigned long long)__entry->cur_lim_bw) -+); -+ -+TRACE_EVENT(bus_avail_bw, -+ -+ TP_PROTO(unsigned long long cur_bimc_bw, unsigned long long cur_mdp_bw), -+ -+ TP_ARGS(cur_bimc_bw, cur_mdp_bw), -+ -+ TP_STRUCT__entry( -+ __field(u64, cur_bimc_bw) -+ __field(u64, cur_mdp_bw) -+ ), -+ -+ TP_fast_assign( -+ __entry->cur_bimc_bw = cur_bimc_bw; -+ __entry->cur_mdp_bw = cur_mdp_bw; -+ ), -+ -+ TP_printk("cur_bimc_bw = %llu cur_mdp_bw = %llu", -+ (unsigned long long)__entry->cur_bimc_bw, -+ (unsigned long long)__entry->cur_mdp_bw) -+); -+ -+TRACE_EVENT(bus_rules_matches, -+ -+ TP_PROTO(int node_id, int rule_id, unsigned long long node_ab, -+ unsigned long long node_ib, unsigned long long node_clk), -+ -+ TP_ARGS(node_id, rule_id, node_ab, node_ib, node_clk), -+ -+ TP_STRUCT__entry( -+ __field(int, node_id) -+ __field(int, rule_id) -+ __field(u64, node_ab) -+ __field(u64, node_ib) -+ __field(u64, node_clk) -+ ), -+ -+ TP_fast_assign( -+ __entry->node_id = node_id; -+ __entry->rule_id = rule_id; -+ __entry->node_ab = node_ab; -+ __entry->node_ib = node_ib; -+ __entry->node_clk = node_clk; -+ ), -+ -+ TP_printk("Rule match node%d rule%d node-ab%llu:ib%llu:clk%llu", -+ __entry->node_id, __entry->rule_id, -+ (unsigned long long)__entry->node_ab, -+ (unsigned long long)__entry->node_ib, -+ (unsigned long long)__entry->node_clk) -+); -+ -+TRACE_EVENT(bus_bke_params, -+ -+ TP_PROTO(u32 gc, u32 gp, u32 thl, u32 thm, u32 thh), -+ -+ TP_ARGS(gc, gp, thl, thm, thh), -+ -+ TP_STRUCT__entry( -+ __field(u32, gc) -+ __field(u32, gp) -+ __field(u32, thl) -+ __field(u32, thm) -+ __field(u32, thh) -+ ), -+ -+ TP_fast_assign( -+ __entry->gc = gc; -+ __entry->gp = gp; -+ __entry->thl = thl; -+ __entry->thm = thm; -+ __entry->thh = thh; -+ ), -+ -+ TP_printk("BKE Params GC=0x%x GP=0x%x THL=0x%x THM=0x%x THH=0x%x", -+ __entry->gc, __entry->gp, __entry->thl, __entry->thm, -+ __entry->thh) -+); -+ -+#endif -+#define TRACE_INCLUDE_FILE trace_msm_bus -+#include diff --git a/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch deleted file mode 100644 index 59e277c349..0000000000 --- a/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch +++ /dev/null @@ -1,177 +0,0 @@ -From: Christian Lamparter -Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st - obj-$(CONFIG_QCOM_SMP2P) += smp2p.o - obj-$(CONFIG_QCOM_SMSM) += smsm.o - obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o ---- a/drivers/soc/qcom/Kconfig -+++ b/drivers/soc/qcom/Kconfig -@@ -78,6 +78,13 @@ config QCOM_SMSM - Say yes here to support the Qualcomm Shared Memory State Machine. - The state machine is represented by bits in shared memory. - -+config QCOM_TCSR -+ tristate "QCOM Top Control and Status Registers" -+ depends on ARCH_QCOM -+ help -+ Say y here to enable TCSR support. The TCSR provides control -+ functions for various peripherals. -+ - config QCOM_WCNSS_CTRL - tristate "Qualcomm WCNSS control driver" - depends on ARCH_QCOM ---- /dev/null -+++ b/drivers/soc/qcom/qcom_tcsr.c -@@ -0,0 +1,98 @@ -+/* -+ * Copyright (c) 2014, The Linux foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License rev 2 and -+ * only rev 2 as published by the free Software foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TCSR_USB_PORT_SEL 0xb0 -+#define TCSR_USB_HSPHY_CONFIG 0xC -+ -+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0 -+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf -+ -+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0 -+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4 -+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4 -+ -+static int tcsr_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ const struct device_node *node = pdev->dev.of_node; -+ void __iomem *base; -+ u32 val; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { -+ dev_err(&pdev->dev, "setting usb port select = %d\n", val); -+ writel(val, base + TCSR_USB_PORT_SEL); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) { -+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val); -+ writel(val, base + TCSR_USB_HSPHY_CONFIG); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) { -+ u32 tmp = 0; -+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val); -+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK); -+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK); -+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) { -+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val); -+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET); -+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) { -+ dev_info(&pdev->dev, -+ "setting wifi_noc_memtype_m0_m2 = %x\n", val); -+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id tcsr_dt_match[] = { -+ { .compatible = "qcom,tcsr", }, -+ { }, -+}; -+ -+MODULE_DEVICE_TABLE(of, tcsr_dt_match); -+ -+static struct platform_driver tcsr_driver = { -+ .driver = { -+ .name = "tcsr", -+ .owner = THIS_MODULE, -+ .of_match_table = tcsr_dt_match, -+ }, -+ .probe = tcsr_probe, -+}; -+ -+module_platform_driver(tcsr_driver); -+ -+MODULE_AUTHOR("Andy Gross "); -+MODULE_DESCRIPTION("QCOM TCSR driver"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/dt-bindings/soc/qcom,tcsr.h -@@ -0,0 +1,48 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#ifndef __DT_BINDINGS_QCOM_TCSR_H -+#define __DT_BINDINGS_QCOM_TCSR_H -+ -+#define TCSR_USB_SELECT_USB3_P0 0x1 -+#define TCSR_USB_SELECT_USB3_P1 0x2 -+#define TCSR_USB_SELECT_USB3_DUAL 0x3 -+ -+/* IPQ40xx HS PHY Mode Select */ -+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7 -+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7 -+ -+/* IPQ40xx ess interface mode select */ -+#define TCSR_ESS_PSGMII 0 -+#define TCSR_ESS_PSGMII_RGMII5 1 -+#define TCSR_ESS_PSGMII_RMII0 2 -+#define TCSR_ESS_PSGMII_RMII1 4 -+#define TCSR_ESS_PSGMII_RMII0_RMII1 6 -+#define TCSR_ESS_PSGMII_RGMII4 9 -+ -+/* -+ * IPQ40xx WiFi Global Config -+ * Bit 30:AXID_EN -+ * Enable AXI master bus Axid translating to confirm all txn submitted by order -+ * Bit 24: Use locally generated socslv_wxi_bvalid -+ * 1: use locally generate socslv_wxi_bvalid for performance. -+ * 0: use SNOC socslv_wxi_bvalid. -+ */ -+#define TCSR_WIFI_GLB_CFG 0x41000000 -+ -+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */ -+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222 -+ -+/* TCSR A/B REG */ -+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 -+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 -+ -+#endif