From: Andres Salomon Date: Fri, 26 Feb 2010 00:18:47 +0000 (-0500) Subject: mac80211: give warning if building w/out rate ctrl algorithm X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c2ef355bf3ef0b8006b96128726684fba47ac928;p=openwrt%2Fstaging%2Fblogic.git mac80211: give warning if building w/out rate ctrl algorithm I discovered that if EMBEDDED=y, one can accidentally build a mac80211 stack and drivers w/ no rate control algorithm. For drivers like RTL8187 that don't supply their own RC algorithms, this will cause ieee80211_register_hw to fail (making the driver unusable). This will tell kconfig to provide a warning if no rate control algorithms have been selected. That'll at least warn the user; users that know that their drivers supply a rate control algorithm can safely ignore the warning, and those who don't know (or who expect to be using multiple drivers) can select a default RC algorithm. Signed-off-by: Andres Salomon Cc: stable@kernel.org Signed-off-by: John W. Linville --- diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index a952b7f8c648..334c359da5e8 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -15,8 +15,12 @@ comment "CFG80211 needs to be enabled for MAC80211" if MAC80211 != n +config MAC80211_HAS_RC + def_bool n + config MAC80211_RC_PID bool "PID controller based rate control algorithm" if EMBEDDED + select MAC80211_HAS_RC ---help--- This option enables a TX rate control algorithm for mac80211 that uses a PID controller to select the TX @@ -24,12 +28,14 @@ config MAC80211_RC_PID config MAC80211_RC_MINSTREL bool "Minstrel" if EMBEDDED + select MAC80211_HAS_RC default y ---help--- This option enables the 'minstrel' TX rate control algorithm choice prompt "Default rate control algorithm" + depends on MAC80211_HAS_RC default MAC80211_RC_DEFAULT_MINSTREL ---help--- This option selects the default rate control algorithm @@ -62,6 +68,9 @@ config MAC80211_RC_DEFAULT endif +comment "Some wireless drivers require a rate control algorithm" + depends on MAC80211_HAS_RC=n + config MAC80211_MESH bool "Enable mac80211 mesh networking (pre-802.11s) support" depends on MAC80211 && EXPERIMENTAL