From: Daniel Golle Date: Wed, 13 Jul 2022 03:29:34 +0000 (+0100) Subject: uboot-mediatek: add support for Bananapi BPi-R3 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c2bc1bd99aabe1298c93cebc0a434c91c754f3ca;p=openwrt%2Fstaging%2Fynezz.git uboot-mediatek: add support for Bananapi BPi-R3 The Bananapi BPi-R3 board can boot from eMMC, SD card, SPI-NAND and SPI-NOR, depending on the position of switches controlling the BOOTSEL bootstrap pins as we as hard-wired chip-select lines. The position of the chip-select switch SW6 decides whether either SD card or eMMC can be accessed, SW5 selects either SPI-NAND or SPI-NOR. Generate U-Boot for all 4 boot options. The SD card version allows installation to SPI-NAND and SPI-NOR (eMMC cannot be accessed simultanously with the SD card), the SPI-NAND version allows installation to eMMC. Signed-off-by: Daniel Golle --- diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index c89fb197ae..7bfc8fd64b 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -180,7 +180,60 @@ define U-Boot/mt7986_rfb BUILD_SUBTARGET:=filogic BUILD_DEVICES:=mediatek_mt7986-rfb UBOOT_CONFIG:=mt7986_rfb - UBOOT_IMAGE:=u-boot.bin + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=sdmmc + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-sdmmc-ddr4 +endef + +define U-Boot/mt7986_bananapi_bpi-r3-emmc + NAME:=BananaPi BPi-R3 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=bananapi_bpi-r3 + UBOOT_CONFIG:=mt7986a_bpi-r3-emmc + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=emmc + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4 +endef + +define U-Boot/mt7986_bananapi_bpi-r3-sdmmc + NAME:=BananaPi BPi-R3 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=bananapi_bpi-r3 + UBOOT_CONFIG:=mt7986a_bpi-r3-sd + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=sdmmc + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-sdmmc-ddr4 +endef + +define U-Boot/mt7986_bananapi_bpi-r3-snand + NAME:=BananaPi BPi-R3 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=bananapi_bpi-r3 + UBOOT_CONFIG:=mt7986a_bpi-r3-snand + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4 +endef + +define U-Boot/mt7986_bananapi_bpi-r3-nor + NAME:=BananaPi BPi-R3 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=bananapi_bpi-r3 + UBOOT_CONFIG:=mt7986a_bpi-r3-nor + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=nor + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-nor-ddr4 + FIP_COMPRESS:=1 endef UBOOT_TARGETS := \ @@ -199,6 +252,10 @@ UBOOT_TARGETS := \ mt7628_rfb \ ravpower_rp-wd009 \ mt7629_rfb \ + mt7986_bananapi_bpi-r3-emmc \ + mt7986_bananapi_bpi-r3-sdmmc \ + mt7986_bananapi_bpi-r3-snand \ + mt7986_bananapi_bpi-r3-nor \ mt7986_rfb ifdef CONFIG_TARGET_mediatek @@ -207,11 +264,11 @@ endif define Build/fip-image $(if $(FIP_COMPRESS),\ - xz -f -e -k -9 -C crc32 $(STAGING_DIR_IMAGE)/$(BUILD_SUBTARGET)-$(BL2_BOOTDEV)-$(BL2_DDRBLOB)ddr-bl31.bin ;\ + xz -f -e -k -9 -C crc32 $(STAGING_DIR_IMAGE)/$(if $(BL2_SOC),$(BL2_SOC),$(BUILD_SUBTARGET))-$(BL2_BOOTDEV)-$(if $(BL2_DDRTYPE),$(BL2_DDRTYPE)-)$(if $(BL2_DDRBLOB),$(BL2_DDRBLOB)ddr-)bl31.bin ;\ xz -f -e -k -9 -C crc32 $(PKG_BUILD_DIR)/u-boot.bin \ ) $(STAGING_DIR_HOST)/bin/fiptool create \ - --soc-fw $(STAGING_DIR_IMAGE)/$(BUILD_SUBTARGET)-$(BL2_BOOTDEV)-$(BL2_DDRBLOB)ddr-bl31.bin$(if $(FIP_COMPRESS),.xz) \ + --soc-fw $(STAGING_DIR_IMAGE)/$(if $(BL2_SOC),$(BL2_SOC),$(BUILD_SUBTARGET))-$(BL2_BOOTDEV)-$(if $(BL2_DDRTYPE),$(BL2_DDRTYPE)-)$(if $(BL2_DDRBLOB),$(BL2_DDRBLOB)ddr-)bl31.bin$(if $(FIP_COMPRESS),.xz) \ --nt-fw $(PKG_BUILD_DIR)/u-boot.bin$(if $(FIP_COMPRESS),.xz) \ $(PKG_BUILD_DIR)/u-boot.fip endef diff --git a/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch b/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch new file mode 100644 index 0000000000..48835e43af --- /dev/null +++ b/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch @@ -0,0 +1,1368 @@ +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -1211,6 +1211,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ + mt7981-snfi-nand-rfb.dtb \ + mt7981-emmc-rfb.dtb \ + mt7981-sd-rfb.dtb \ ++ mt7986a-bpi-r3-sd.dtb \ ++ mt7986a-bpi-r3-emmc.dtb \ + mt7986a-rfb.dtb \ + mt7986b-rfb.dtb \ + mt7986a-sd-rfb.dtb \ +--- /dev/null ++++ b/configs/mt7986a_bpi-r3-emmc_defconfig +@@ -0,0 +1,192 @@ ++CONFIG_ARM=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TARGET_MT7986=y ++CONFIG_SYS_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc" ++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_emmc_env" ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_SMBIOS_PRODUCT_NAME="" ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_CFB_CONSOLE_ANSI=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_GPIO_HOG=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_FIT=y ++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_SYS_PROMPT="MT7986> " ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_BOOTP=y ++CONFIG_CMD_BUTTON=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_ECHO=y ++CONFIG_CMD_ENV_READMEM=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FDT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_ITEST=y ++CONFIG_CMD_LED=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_LINK_LOCAL=y ++# CONFIG_CMD_MBR is not set ++CONFIG_CMD_MMC=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_TFTPBOOT=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_SLEEP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_SOURCE=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_UUID=y ++CONFIG_DISPLAY_CPUINFO=y ++CONFIG_DM_MMC=y ++CONFIG_DM_MTD=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_DM_USB=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_PARTITION_UUIDS=y ++CONFIG_NETCONSOLE=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_DM_GPIO=y ++CONFIG_DM_SCSI=y ++CONFIG_AHCI=y ++CONFIG_AHCI_PCI=y ++CONFIG_SCSI_AHCI=y ++CONFIG_SCSI=y ++CONFIG_CMD_SCSI=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PHY_FIXED=y ++CONFIG_MTK_AHCI=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PCI=y ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_DM_PCI=y ++CONFIG_PCIE_MEDIATEK=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7622=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_MMC=y ++CONFIG_MMC_DEFAULT_DEV=1 ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_MMC_SUPPORTS_TUNING=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y ++CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_WDT_MTK=y ++CONFIG_LZO=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_RANDOM_UUID=y ++CONFIG_REGEX=y ++CONFIG_USB=y ++CONFIG_USB_HOST=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_MMC=y ++CONFIG_ENV_OFFSET=0x400000 ++CONFIG_ENV_OFFSET_REDUND=0x440000 ++CONFIG_ENV_SIZE=0x40000 ++CONFIG_ENV_SIZE_REDUND=0x40000 ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_PHY_FIXED=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7986=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_HEXDUMP=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTK_SPIM=y ++#CONFIG_MTK_SNOR=y ++CONFIG_DM_SPI_FLASH=y ++CONFIG_SPI_FLASH_MTD=y ++CONFIG_SPI_FLASH_WINBOND=y ++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set ++CONFIG_CMD_MTD=y ++CONFIG_CMD_SF=y ++CONFIG_CMD_NAND=y ++CONFIG_CMD_NAND_TRIMFFS=y ++# CONFIG_ENABLE_NAND_NMBM is not set +--- /dev/null ++++ b/configs/mt7986a_bpi-r3-nor_defconfig +@@ -0,0 +1,193 @@ ++CONFIG_ARM=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TARGET_MT7986=y ++CONFIG_SYS_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc" ++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_nor_env" ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_SMBIOS_PRODUCT_NAME="" ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_CFB_CONSOLE_ANSI=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_GPIO_HOG=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_FIT=y ++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_SYS_PROMPT="MT7986> " ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_BOOTP=y ++CONFIG_CMD_BUTTON=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_ECHO=y ++CONFIG_CMD_ENV_READMEM=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FDT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_ITEST=y ++CONFIG_CMD_LED=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_LINK_LOCAL=y ++# CONFIG_CMD_MBR is not set ++CONFIG_CMD_MMC=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_TFTPBOOT=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_SLEEP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_SOURCE=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_UUID=y ++CONFIG_DISPLAY_CPUINFO=y ++CONFIG_DM_MMC=y ++CONFIG_DM_MTD=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_DM_USB=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_PARTITION_UUIDS=y ++CONFIG_NETCONSOLE=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_DM_GPIO=y ++CONFIG_DM_SCSI=y ++CONFIG_AHCI=y ++CONFIG_AHCI_PCI=y ++CONFIG_SCSI_AHCI=y ++CONFIG_SCSI=y ++CONFIG_CMD_SCSI=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PHY_FIXED=y ++CONFIG_MTK_AHCI=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PCI=y ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_DM_PCI=y ++CONFIG_PCIE_MEDIATEK=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7622=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_MMC=y ++CONFIG_MMC_DEFAULT_DEV=1 ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_MMC_SUPPORTS_TUNING=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y ++CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_WDT_MTK=y ++CONFIG_LZO=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_RANDOM_UUID=y ++CONFIG_REGEX=y ++CONFIG_USB=y ++CONFIG_USB_HOST=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_MTD=y ++CONFIG_ENV_MTD_NAME="u-boot-env" ++CONFIG_ENV_OFFSET=0x0 ++CONFIG_ENV_OFFSET_REDUND=0x20000 ++CONFIG_ENV_SIZE=0x20000 ++CONFIG_ENV_SIZE_REDUND=0x20000 ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_PHY_FIXED=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7986=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_HEXDUMP=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++#CONFIG_MTD_SPI_NAND=y ++CONFIG_MTK_SPIM=y ++#CONFIG_MTK_SNOR=y ++CONFIG_DM_SPI_FLASH=y ++CONFIG_SPI_FLASH_MTD=y ++CONFIG_SPI_FLASH_WINBOND=y ++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set ++CONFIG_CMD_MTD=y ++CONFIG_CMD_SF=y ++#CONFIG_CMD_NAND=y ++#CONFIG_CMD_NAND_TRIMFFS=y ++# CONFIG_ENABLE_NAND_NMBM is not set +--- /dev/null ++++ b/configs/mt7986a_bpi-r3-sd_defconfig +@@ -0,0 +1,192 @@ ++CONFIG_ARM=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TARGET_MT7986=y ++CONFIG_SYS_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-sd" ++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_sdmmc_env" ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-sd.dtb" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_SMBIOS_PRODUCT_NAME="" ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_CFB_CONSOLE_ANSI=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_GPIO_HOG=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_FIT=y ++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_SYS_PROMPT="MT7986> " ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_BOOTP=y ++CONFIG_CMD_BUTTON=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_ECHO=y ++CONFIG_CMD_ENV_READMEM=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FDT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_ITEST=y ++CONFIG_CMD_LED=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_LINK_LOCAL=y ++# CONFIG_CMD_MBR is not set ++CONFIG_CMD_MMC=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_TFTPBOOT=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_SLEEP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_SOURCE=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_UUID=y ++CONFIG_DISPLAY_CPUINFO=y ++CONFIG_DM_MMC=y ++CONFIG_DM_MTD=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_DM_USB=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_PARTITION_UUIDS=y ++CONFIG_NETCONSOLE=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_DM_GPIO=y ++CONFIG_DM_SCSI=y ++CONFIG_AHCI=y ++CONFIG_AHCI_PCI=y ++CONFIG_SCSI_AHCI=y ++CONFIG_SCSI=y ++CONFIG_CMD_SCSI=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PHY_FIXED=y ++CONFIG_MTK_AHCI=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PCI=y ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_DM_PCI=y ++CONFIG_PCIE_MEDIATEK=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7622=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_MMC=y ++CONFIG_MMC_DEFAULT_DEV=1 ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_MMC_SUPPORTS_TUNING=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y ++CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_WDT_MTK=y ++CONFIG_LZO=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_RANDOM_UUID=y ++CONFIG_REGEX=y ++CONFIG_USB=y ++CONFIG_USB_HOST=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_MMC=y ++CONFIG_ENV_OFFSET=0x400000 ++CONFIG_ENV_OFFSET_REDUND=0x440000 ++CONFIG_ENV_SIZE=0x40000 ++CONFIG_ENV_SIZE_REDUND=0x40000 ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_PHY_FIXED=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7986=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_HEXDUMP=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTK_SPIM=y ++#CONFIG_MTK_SNOR=y ++CONFIG_DM_SPI_FLASH=y ++CONFIG_SPI_FLASH_MTD=y ++CONFIG_SPI_FLASH_WINBOND=y ++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set ++CONFIG_CMD_MTD=y ++CONFIG_CMD_SF=y ++CONFIG_CMD_NAND=y ++CONFIG_CMD_NAND_TRIMFFS=y ++# CONFIG_ENABLE_NAND_NMBM is not set +--- /dev/null ++++ b/configs/mt7986a_bpi-r3-snand_defconfig +@@ -0,0 +1,193 @@ ++CONFIG_ARM=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TARGET_MT7986=y ++CONFIG_SYS_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc" ++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_snand_env" ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_SMBIOS_PRODUCT_NAME="" ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_CFB_CONSOLE_ANSI=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_GPIO_HOG=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_FIT=y ++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_SYS_PROMPT="MT7986> " ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_BOOTP=y ++CONFIG_CMD_BUTTON=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_ECHO=y ++CONFIG_CMD_ENV_READMEM=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FDT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_ITEST=y ++CONFIG_CMD_LED=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_LINK_LOCAL=y ++# CONFIG_CMD_MBR is not set ++CONFIG_CMD_MMC=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_TFTPBOOT=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_SLEEP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_SOURCE=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_UUID=y ++CONFIG_DISPLAY_CPUINFO=y ++CONFIG_DM_MMC=y ++CONFIG_DM_MTD=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_DM_USB=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_PARTITION_UUIDS=y ++CONFIG_NETCONSOLE=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_DM_GPIO=y ++CONFIG_DM_SCSI=y ++CONFIG_AHCI=y ++CONFIG_AHCI_PCI=y ++CONFIG_SCSI_AHCI=y ++CONFIG_SCSI=y ++CONFIG_CMD_SCSI=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PHY_FIXED=y ++CONFIG_MTK_AHCI=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PCI=y ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_DM_PCI=y ++CONFIG_PCIE_MEDIATEK=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7622=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_MMC=y ++CONFIG_MMC_DEFAULT_DEV=1 ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_MMC_SUPPORTS_TUNING=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y ++CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_WDT_MTK=y ++CONFIG_LZO=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_RANDOM_UUID=y ++CONFIG_REGEX=y ++CONFIG_USB=y ++CONFIG_USB_HOST=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_SIZE=0x1f000 ++CONFIG_ENV_SIZE_REDUND=0x1f000 ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_PHY_FIXED=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7986=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_HEXDUMP=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTK_SPIM=y ++#CONFIG_MTK_SNOR=y ++#CONFIG_DM_SPI_FLASH=y ++#CONFIG_SPI_FLASH_MTD=y ++#CONFIG_SPI_FLASH_WINBOND=y ++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set ++CONFIG_CMD_MTD=y ++#CONFIG_CMD_SF=y ++CONFIG_CMD_NAND=y ++CONFIG_CMD_NAND_TRIMFFS=y ++# CONFIG_ENABLE_NAND_NMBM is not set +--- /dev/null ++++ b/arch/arm/dts/mt7986a-bpi-r3-emmc.dts +@@ -0,0 +1,33 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2021 MediaTek Inc. ++ * Author: Sam Shih ++ */ ++ ++/dts-v1/; ++#include "mt7986a-bpi-r3-sd.dts" ++#include ++/ { ++ reg_1p8v: regulator-1p8v { ++ compatible = "regulator-fixed"; ++ regulator-name = "fixed-1.8V"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_default>; ++ bus-width = <8>; ++ max-frequency = <200000000>; ++ cap-mmc-highspeed; ++ cap-mmc-hw-reset; ++ vmmc-supply = <®_3p3v>; ++ vqmmc-supply = <®_1p8v>; ++ non-removable; ++ status = "okay"; ++}; ++ +--- /dev/null ++++ b/arch/arm/dts/mt7986a-bpi-r3-sd.dts +@@ -0,0 +1,269 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2021 MediaTek Inc. ++ * Author: Sam Shih ++ */ ++ ++/dts-v1/; ++#include "mt7986.dtsi" ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "BananaPi BPi-R3"; ++ compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ reg_3p3v: regulator-3p3v { ++ compatible = "regulator-fixed"; ++ regulator-name = "fixed-3.3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ factory { ++ label = "reset"; ++ gpios = <&gpio 9 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wps { ++ label = "wps"; ++ gpios = <&gpio 10 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led_status_green: green { ++ label = "green:status"; ++ gpios = <&gpio 69 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ led_status_blue: blue { ++ label = "blue:status"; ++ gpios = <&gpio 86 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "disabled"; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "sgmii"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++}; ++ ++&pinctrl { ++ spic_pins: spi1-pins-func-1 { ++ mux { ++ function = "spi"; ++ groups = "spi1_2"; ++ }; ++ }; ++ ++ uart1_pins: spi1-pins-func-3 { ++ mux { ++ function = "uart"; ++ groups = "uart1_2"; ++ }; ++ }; ++ ++ pwm_pins: pwm0-pins-func-1 { ++ mux { ++ function = "pwm"; ++ groups = "pwm0"; ++ }; ++ }; ++ ++ mmc0_pins_default: mmc0default { ++ mux { ++ function = "flash"; ++ groups = "emmc_51"; ++ }; ++ ++ conf-cmd-dat { ++ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", ++ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", ++ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; ++ input-enable; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-clk { ++ pins = "EMMC_CK"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ ++ conf-dsl { ++ pins = "EMMC_DSL"; ++ bias-pull-down = ; ++ }; ++ ++ conf-rst { ++ pins = "EMMC_RSTB"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ }; ++ ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++}; ++ ++&pwm { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <1>; ++ sample_sel = <0>; ++ ++ spi_nor@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x40000>; ++ }; ++ ++ partition@40000 { ++ label = "u-boot-env"; ++ reg = <0x40000 0x40000>; ++ }; ++ ++ partition@80000 { ++ label = "reserved"; ++ reg = <0x80000 0x80000>; ++ }; ++ ++ partition@100000 { ++ label = "fip"; ++ reg = <0x100000 0x80000>; ++ }; ++ ++ partition@180000 { ++ label = "recovery"; ++ reg = <0x180000 0xa80000>; ++ }; ++ ++ partition@c00000 { ++ label = "fit"; ++ reg = <0xc00000 0x1400000>; ++ }; ++ }; ++ }; ++ ++ spi_nand@1 { ++ compatible = "spi-nand"; ++ reg = <1>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x80000>; ++ }; ++ ++ partition@80000 { ++ label = "factory"; ++ reg = <0x80000 0x300000>; ++ }; ++ ++ partition@380000 { ++ label = "fip"; ++ reg = <0x380000 0x200000>; ++ }; ++ ++ partition@580000 { ++ label = "ubi"; ++ reg = <0x580000 0x7a80000>; ++ }; ++ }; ++ }; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_default>; ++ bus-width = <4>; ++ max-frequency = <52000000>; ++ cap-sd-highspeed; ++ r_smpl = <1>; ++ vmmc-supply = <®_3p3v>; ++ vqmmc-supply = <®_3p3v>; ++ status = "okay"; ++}; ++ +--- /dev/null ++++ b/bananapi_bpi-r3_sdmmc_env +@@ -0,0 +1,75 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=root=/dev/mmcblk0p65 ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi ++bootconf=config-mt7986a-bananapi-bpi-r3 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb ++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb ++bootled_pwr=green:status ++bootled_rec=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) [SD card] ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from SD card.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from SD card.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Install bootloader, recovery and production to NOR.=if sf probe ; then run nor_init ; else echo "NOR not detected" ; fi ; run bootmenu_confirm_return ++bootmenu_7=Install bootloader, recovery and production to NAND.=if nand info ; then run ubi_init ; else echo "NAND not detected" ; fi ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; else if sf probe ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3 ; fi ; fi ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_pwr on ; run boot_update_conf ; run sdmmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=led $bootled_rec on ; run boot_update_conf ; run sdmmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_sdmmc=run boot_production ; run boot_recovery ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run sdmmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run sdmmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $loadaddr 0x$part_addr 0x$image_size ++mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200 ++part_default=production ++part_recovery=recovery ++reset_factory=eraseenv && reset ++sdmmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol ++sdmmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol ++sdmmc_read_snand_bl2=part start mmc 0 install part_addr && mmc read $loadaddr $part_addr 0x400 ++sdmmc_read_snand_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x800 && mmc read $loadaddr $offset 0x1000 ++sdmmc_read_nor_bl2=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x2800 && mmc read $loadaddr $offset 0x400 ++sdmmc_read_nor_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3000 && mmc read $loadaddr $offset 0x1000 ++sdmmc_read_emmc_install=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3800 && mmc read $loadaddr $offset 0x4000 ++sdmmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol ++sdmmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol ++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr ++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000 ++nor_erase_env=mtd erase u-boot-env ++nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb ++nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb ++nor_init=run nor_init_bl && run nor_init_openwrt ++nor_init_bl=run sdmmc_read_nor_bl2 && run mtd_write_bl2 && run sdmmc_read_nor_fip && run mtd_write_fip && run nor_erase_env ++nor_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run nor_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run nor_write_production ++ubi_create_env=ubi create ubootenv 0x100000 dynamic 0 ; ubi create ubootenv2 0x100000 dynamic 1 ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ++ubi_init=run ubi_init_bl && run ubi_format && run ubi_create_env && run ubi_init_openwrt && run ubi_init_emmc_install ++ubi_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run ubi_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run ubi_write_production ++ubi_init_bl=run sdmmc_read_snand_bl2 && run mtd_write_bl2 && run sdmmc_read_snand_fip && run mtd_write_fip ++ubi_init_emmc_install=run sdmmc_read_emmc_install && run ubi_write_emmc_install ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_emmc_install=ubi check emmc_install && ubi remote emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000 ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" +--- /dev/null ++++ b/bananapi_bpi-r3_nor_env +@@ -0,0 +1,55 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=root=/dev/mtdblock0p1 ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi ++bootconf=config-mt7986a-bananapi-bpi-r3-emmc-nor ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb ++bootled_pwr=green:status ++bootled_rec=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NOR] ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from flash.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from flash.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to flash.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to flash.=run boot_tftp_write_preloader ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=run boot_update_conf ; led $bootled_pwr on ; run nor_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=run boot_update_conf ; led $bootled_rec on ; run nor_read_recovery ; bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_serial_write_fip=loadx $loadaddr 115200 && run boot_write_fip ++boot_serial_write_preloader=loadx $loadaddr 115200 && run boot_write_preloader ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run nor_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run nor_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip ++boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader ++boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; fi ++boot_nor=run boot_production ; run boot_recovery ++boot_write_fip=mtd erase fip && mtd write fip $loadaddr ++boot_write_preloader=mtd erase bl2 && mtd write bl2 $loadaddr ++reset_factory=mtd erase u-boot-env ++nor_read_production=mtd read fit $loadaddr 0x0 0x1000 && imsz $loadaddr image_size && mtd read fit $loadaddr 0x0 $image_size ++nor_read_recovery=mtd read recovery $loadaddr 0x0 0x1000 && imsz $loadaddr image_size && mtd read recovery $loadaddr 0x0 $image_size ++nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000 ++nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb ++nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb ++_init_env=setenv _init_env ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" +--- /dev/null ++++ b/bananapi_bpi-r3_snand_env +@@ -0,0 +1,69 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=root=/dev/ubiblock0_2p1 ++bootconf=config-mt7986a-bananapi-bpi-r3-snand ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-snand-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-snand-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb ++bootled_pwr=green:status ++bootled_rec=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NAND] ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Install bootloader, recovery and production to eMMC.=if mmc partconf 0 ; then run emmc_init ; else echo "eMMC not detected" ; fi ; run bootmenu_confirm_return ++bootmenu_9=Reboot.=reset ++bootmenu_10=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=run boot_update_conf ; led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=run boot_update_conf ; led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_ubi=run boot_update_conf ; run boot_production ; run boot_recovery ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; fi ++part_default=production ++part_recovery=recovery ++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 ++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr ++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_read_emmc_install=ubi check emmc_install && ubi read $loadaddr emmc_install ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize ++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $loadaddr 0x$part_addr 0x$image_size ++emmc_init=mmc dev 0 && mmc bootbus 0 0 0 0 && run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv ++emmc_init_bl=run ubi_read_emmc_install && setenv fileaddr $loadaddr && run emmc_write_bl2 && setexpr fileaddr $loadaddr + 0x100000 && run emmc_write_fip && setexpr fileaddr $loadaddr + 0x500000 && run emmc_write_hdr ++emmc_init_openwrt=run ubi_read_recovery && iminfo $loadaddr && run emmc_write_recovery ; run ubi_read_production && iminfo $loadaddr && run emmc_write_production ++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0 ++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800 ++emmc_write_hdr=mmc erase 0x0 0x40 && mmc write $fileaddr 0x0 0x40 ++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol ++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" +--- /dev/null ++++ b/bananapi_bpi-r3_emmc_env +@@ -0,0 +1,56 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=root=/dev/mmcblk0p65 ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi ++bootconf=config-mt7986a-bananapi-bpi-r3-emmc ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb ++bootled_pwr=green:status ++bootled_rec=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) [eMMC] ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=run boot_update_conf ; led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=run boot_update_conf ; led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_emmc=run boot_update_conf ; run boot_production ; run boot_recovery ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2 ++boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; fi ++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $loadaddr 0x$part_addr 0x$image_size ++mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200 ++part_default=production ++part_recovery=recovery ++reset_factory=eraseenv && reset ++emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol ++emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol ++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0 ++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800 ++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol ++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol ++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"