From: Matteo Croce <rootkit85@yahoo.it>
Date: Thu, 13 Mar 2008 17:20:25 +0000 (+0000)
Subject: fix serial patch
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c25cc7e6e5d7f7f6ea0713837ae2050bd608a981;p=openwrt%2Fstaging%2Fsvanheule.git

fix serial patch

SVN-Revision: 10602
---

diff --git a/target/linux/ar7/patches-2.6.24/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.24/500-serial_kludge.patch
index 446b2b555c..edb2b5e9f6 100644
--- a/target/linux/ar7/patches-2.6.24/500-serial_kludge.patch
+++ b/target/linux/ar7/patches-2.6.24/500-serial_kludge.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.23-rc6/drivers/serial/8250.c
+Index: linux-2.6.24/drivers/serial/8250.c
 ===================================================================
---- linux-2.6.23-rc6.orig/drivers/serial/8250.c	2007-09-21 16:23:51.000000000 +0800
-+++ linux-2.6.23-rc6/drivers/serial/8250.c	2007-09-21 16:24:14.000000000 +0800
+--- linux-2.6.24/drivers/serial/8250.c	2007-09-21 16:23:51.000000000 +0800
++++ linux-2.6.24/drivers/serial/8250.c	2007-09-21 16:24:14.000000000 +0800
 @@ -267,6 +267,13 @@
  		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
  		.flags		= UART_CAP_FIFO,
@@ -28,30 +28,17 @@ Index: linux-2.6.23-rc6/drivers/serial/8250.c
  	serial_out(up, UART_TX, ch);
  }
  
-Index: linux-2.6.23-rc6/include/linux/serial_core.h
+Index: linux-2.6.24/include/linux/serial_core.h
 ===================================================================
---- linux-2.6.23-rc6.orig/include/linux/serial_core.h	2007-09-21 16:23:51.000000000 +0800
-+++ linux-2.6.23-rc6/include/linux/serial_core.h	2007-09-21 16:24:14.000000000 +0800
-@@ -40,6 +40,7 @@
+--- linux-2.6.24/include/linux/serial_core.h	2007-09-21 16:23:51.000000000 +0800
++++ linux-2.6.24/include/linux/serial_core.h	2007-09-21 16:24:14.000000000 +0800
+@@ -40,7 +40,8 @@
  #define PORT_NS16550A	14
  #define PORT_XSCALE	15
  #define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
-+#define PORT_AR7	16
- #define PORT_MAX_8250	16	/* max port ID */
+-#define PORT_MAX_8250	16	/* max port ID */
++#define PORT_AR7	17
++#define PORT_MAX_8250	17	/* max port ID */
  
  /*
-Index: linux-2.6.23-rc6/include/linux/serialP.h
-===================================================================
---- linux-2.6.23-rc6.orig/include/linux/serialP.h	2007-09-21 16:23:51.000000000 +0800
-+++ linux-2.6.23-rc6/include/linux/serialP.h	2007-09-21 16:24:14.000000000 +0800
-@@ -135,6 +135,10 @@
-  * the interrupt line _up_ instead of down, so if we register the IRQ
-  * while the UART is in that state, we die in an IRQ storm. */
- #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
-+#elif defined(CONFIG_AR7)
-+/* This is how it is set up by bootloader... */
-+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 \
-+			| UART_MCR_RTS | UART_MCR_DTR)
- #else
- #define ALPHA_KLUDGE_MCR 0
- #endif
+  * ARM specific type numbers.  These are not currently guaranteed