From: Sven Eckelmann <sven@narfation.org>
Date: Thu, 25 Mar 2021 12:26:15 +0000 (+0100)
Subject: mvebu: Fix mac addresses for GL.iNet GL-MV1000
X-Git-Tag: v22.03.0-rc1~2950
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c20ac84803242e5a6451184009dabc36ba83b96e;p=openwrt%2Fopenwrt.git

mvebu: Fix mac addresses for GL.iNet GL-MV1000

The original GL.iNet firmware has two different mac addresses in the
factory/art partition. The first one is for the WAN interface only and the
second one is for both lan0 and lan1.

But the original submission for OpenWrt didn't initialize the mac
addresses of the LAN ports for the DSA device at all. The ethernet mac
address was then used for all DSA ports.

Fixes: 050c24f05c85 ("mvebu: add support for GL.iNet GL-MV1000")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---

diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index 7c85ab4a9d..80b078cfaa 100644
--- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -168,12 +168,16 @@
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
+
+				mtd-mac-address = <&factory 0x6>;
 			};
 
 			port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
+
+				mtd-mac-address = <&factory 0x6>;
 			};
 		};