From: Daniel Kestrel Date: Wed, 3 May 2023 13:05:49 +0000 (+0200) Subject: lantiq: add support for AVM Fritzbox 3490 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c18a05ee15e28fd58a4af81efa7761aa628a7d8b;p=openwrt%2Fstaging%2Flinusw.git lantiq: add support for AVM Fritzbox 3490 This adds support for the Fritzbox 3490 device. It contains two SoCs, one Lantiq with a 5GHz WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module which is not supported with this commit. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port 4 phy switch, 4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - VDSL2 modem - Without telephony or ISDN Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http:///support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel --- diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490-micron.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490-micron.dts new file mode 100644 index 0000000000..b122c04bc0 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490-micron.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "vr9_avm_fritz3490.dtsi" + +/ { + compatible = "avm,fritz3490-micron", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 3490 (Micron NAND)"; +}; + +&nand1 { + nand-ecc-engine = <&nand1>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dts new file mode 100644 index 0000000000..d795a0b6eb --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "vr9_avm_fritz3490.dtsi" + +/ { + compatible = "avm,fritz3490", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 3490"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dtsi new file mode 100644 index 0000000000..4d96abd1c3 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dtsi @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "vr9_avm_fritzxx90.dtsi" + +/ { + compatible = "avm,fritz3490", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 3490"; +}; + +&aliases { + led-dsl = &led_info_green; + led-internet = &led_internet; + led-wifi = &led_wifi; +}; + +&leds { + led_lan: lan { + label = "green:lan"; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + + led_wifi: wifi { + label = "green:wlan"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + led_internet: internet { + label = "green:internet"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x00>; + reset-gpios = <&gpio 32 GPIO_ACTIVE_LOW>; + }; + + phy1: ethernet-phy@1 { + reg = <0x01>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan3"; + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "rgmii-rxid"; + phy-handle = <&phy1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; +}; diff --git a/target/linux/lantiq/image/vr9.mk b/target/linux/lantiq/image/vr9.mk index 81aa5d97b1..53b05795aa 100644 --- a/target/linux/lantiq/image/vr9.mk +++ b/target/linux/lantiq/image/vr9.mk @@ -149,6 +149,30 @@ define Device/avm_fritz3390 endef TARGET_DEVICES += avm_fritz3390 +define Device/avm_fritz3490 + $(Device/dsa-migration) + $(Device/AVM) + $(Device/NAND) + DEVICE_MODEL := FRITZ!Box 3490 + DEVICE_VARIANT := Other NAND + KERNEL_SIZE := 4096k + IMAGE_SIZE := 49152k + DEVICE_PACKAGES := kmod-usb3 fritz-tffs -kmod-owl-loader +endef +TARGET_DEVICES += avm_fritz3490 + +define Device/avm_fritz3490-micron + $(Device/dsa-migration) + $(Device/AVM) + $(Device/NAND) + DEVICE_MODEL := FRITZ!Box 3490 + DEVICE_VARIANT := Micron NAND + KERNEL_SIZE := 4096k + IMAGE_SIZE := 49152k + DEVICE_PACKAGES := kmod-usb3 fritz-tffs -kmod-owl-loader +endef +TARGET_DEVICES += avm_fritz3490-micron + define Device/avm_fritz5490 $(Device/dsa-migration) $(Device/AVM) diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds index f165805f0a..36830b216a 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds @@ -42,6 +42,8 @@ arcadyan,vgv7519-brn) avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz3390|\ +avm,fritz3490|\ +avm,fritz3490-micron|\ avm,fritz5490|\ avm,fritz5490-micron|\ avm,fritz7490|\ diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network index 655053ce26..5baf24d737 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network @@ -36,6 +36,8 @@ lantiq_setup_interfaces() avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz3390|\ + avm,fritz3490|\ + avm,fritz3490-micron|\ avm,fritz7360sl|\ avm,fritz7360-v2|\ avm,fritz7362sl|\ @@ -70,6 +72,8 @@ lantiq_setup_dsl() avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz3390|\ + avm,fritz3490|\ + avm,fritz3490-micron|\ avm,fritz7360sl|\ avm,fritz7362sl|\ avm,fritz7412|\ @@ -122,6 +126,8 @@ lantiq_setup_macs() wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1) ;; avm,fritz3390|\ + avm,fritz3490|\ + avm,fritz3490-micron|\ avm,fritz5490|\ avm,fritz5490-micron|\ avm,fritz7362sl|\ diff --git a/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh index 6142714acc..b45894561c 100755 --- a/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh +++ b/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh @@ -12,6 +12,8 @@ platform_do_upgrade() { avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz3390|\ + avm,fritz3490|\ + avm,fritz3490-micron|\ avm,fritz5490|\ avm,fritz5490-micron|\ avm,fritz7362sl|\