From: John Crispin Date: Thu, 19 Sep 2013 05:56:46 +0000 (+0000) Subject: ralink: add support for dalink dcs930l ipcam X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c0f6bf05f4b73d4541865db9785fe691666774cb;p=openwrt%2Fstaging%2Fstintel.git ralink: add support for dalink dcs930l ipcam Signed-off-by: John Crispin SVN-Revision: 38053 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index c8f73e7971..bfe53e1d9e 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -27,7 +27,7 @@ get_status_led() { d105) status_led="d105:red:power" ;; - dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1) + dcs-930 | dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1) status_led="d-link:green:status" ;; dir-645) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index a56781787d..b0b071774a 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -68,6 +68,7 @@ case "$FIRMWARE" in br6524n | \ carambola | \ d105 | \ + dcs-930 | \ dir-300-b7 | \ dir-320-b1 | \ dir-610-a1 | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 0184ef4df7..345bd81a0b 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -43,6 +43,7 @@ ramips_setup_interfaces() all5003 | \ awm002-evb | \ broadway | \ + dcs-930| \ wnce2001) ucidef_add_switch "switch0" "1" "0" ucidef_set_interface_lan "eth0" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index a92e8189b9..494f9d4d0d 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -64,6 +64,9 @@ ramips_board_detect() { *"Aztech HW550-3G") name="hw550-3g" ;; + *"DCS-930") + name="dcs-930" + ;; *"DIR-300 B1") name="dir-300-b1" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index cc8ca89aa5..e7087cc673 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -29,6 +29,7 @@ platform_check_image() { broadway | \ carambola | \ d105 | \ + dcs-930 | \ dir-300-b1 | \ dir-300-b7 | \ dir-320-b1 | \ diff --git a/target/linux/ramips/dts/DCS-930.dts b/target/linux/ramips/dts/DCS-930.dts new file mode 100644 index 0000000000..31dab45814 --- /dev/null +++ b/target/linux/ramips/dts/DCS-930.dts @@ -0,0 +1,118 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "DCS-930", "ralink,rt3050-soc"; + model = "D-Link DCS-930"; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x400000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "d-link:red:alert"; + gpios = <&gpio0 8 1>; + }; + power { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x101>; + }; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + esw@10110000 { + ralink,portmap = <0x2f>; + + port@0 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <0 4>; + }; + port@1 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <1 3>; + }; + port@2 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <2 2>; + }; + port@3 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <3 1>; + }; + port@4 { + compatible = "swconfig,port"; + swconfig,segment = "wan"; + swconfig,portmap = <4 0>; + }; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index f4bb5686e8..5ee76a6057 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -357,6 +357,8 @@ Image/Build/Profile/DAP1350=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350,DAP- Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3) +Image/Build/Profile/DCS930=$(call BuildFirmware/Default4M/$(1),$(1),dcs-930,DCS-930) + Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753) Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G) @@ -519,6 +521,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/DIR615H1,$(1)) $(call Image/Build/Profile/DAP1350,$(1)) $(call Image/Build/Profile/DAP1350WW,$(1)) + $(call Image/Build/Profile/DCS930,$(1)) $(call Image/Build/Profile/ESR-9753,$(1)) $(call Image/Build/Profile/F7C027,$(1)) $(call Image/Build/Profile/F5D8235V2,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/dlink.mk b/target/linux/ramips/rt305x/profiles/dlink.mk index 877724d886..5c5ea8fc90 100644 --- a/target/linux/ramips/rt305x/profiles/dlink.mk +++ b/target/linux/ramips/rt305x/profiles/dlink.mk @@ -18,6 +18,18 @@ endef $(eval $(call Profile,DIR615H1)) +define Profile/DCS930 + NAME:=Dlink DCS-930 + PACKAGES:=kmod-video-core kmod-video-uvc \ + kmod-usb-core kmod-usb-rt305x-dwc_otg +endef + +define Profile/DCS930/Description + Package set for Dlink DCS-930 board +endef + +$(eval $(call Profile,DCS930)) + define Profile/DIR610A1 NAME:=Dlink DIR-610 A1 PACKAGES:=kmod-ledtrig-netdev kmod-ledtrig-timer