From: Himanshu Madhani Date: Sat, 24 Dec 2016 02:06:08 +0000 (-0800) Subject: qla2xxx: Reset reserved field in firmware options to 0 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c0f6462754f050e9bc960662992c029c5ef88f34;p=openwrt%2Fstaging%2Fblogic.git qla2xxx: Reset reserved field in firmware options to 0 During NVRAM initialization in target mode, reset reserved fields in firmware options to Zero (BIT 15) Signed-off-by: Himanshu Madhani Signed-off-by: Giridhar Malavali Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index dd5b2e22bd5c..6eb051783dc8 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -6542,6 +6542,13 @@ qlt_24xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_24xx *nv) /* Disable Full Login after LIP */ nv->host_p &= cpu_to_le32(~BIT_10); + + /* + * clear BIT 15 explicitly as we have seen at least + * a couple of instances where this was set and this + * was causing the firmware to not be initialized. + */ + nv->firmware_options_1 &= cpu_to_le32(~BIT_15); /* Enable target PRLI control */ nv->firmware_options_2 |= cpu_to_le32(BIT_14); } else { @@ -6626,11 +6633,17 @@ qlt_81xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_81xx *nv) /* Disable ini mode, if requested */ if (!qla_ini_mode_enabled(vha)) nv->firmware_options_1 |= cpu_to_le32(BIT_5); - /* Disable Full Login after LIP */ nv->firmware_options_1 &= cpu_to_le32(~BIT_13); /* Enable initial LIP */ nv->firmware_options_1 &= cpu_to_le32(~BIT_9); + /* + * clear BIT 15 explicitly as we have seen at + * least a couple of instances where this was set + * and this was causing the firmware to not be + * initialized. + */ + nv->firmware_options_1 &= cpu_to_le32(~BIT_15); if (ql2xtgt_tape_enable) /* Enable FC tape support */ nv->firmware_options_2 |= cpu_to_le32(BIT_12);