From: Jackson Ming Hu Date: Fri, 15 Dec 2017 03:51:33 +0000 (+0800) Subject: ramips: add support for newifi d2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c0e131b4363dde16a1071131b7e762e36099f780;p=openwrt%2Fstaging%2Fadrian.git ramips: add support for newifi d2 Previously Newifi D2 could only use PandoraBox M1's firmware. It works fine, but LED GPIO is different. As a result, a separated DTS file for this device should be implemented. Hardware spec: * CPU: MTK MT7621A * RAM: 512MB * ROM: 32MB SPI Flash * WiFi: MTK MT7603+MT7612 * Button: 2 buttons (reset, wps) * LED: 3 single-color LEDs (USB, WiFi 2.4GHz, WiFi 5GHz) & 2 dual-color LEDs (Power, Internet) * Ethernet: 5 ports, 4 LAN + 1 WAN Installation method: Same as Newifi D1, users may need to request unlock code from the device manufacturer. Otherwise, a SPI flash programmer may be necessary to get the firmware flashed. After the device is unlocked, press and hold reset button before power cable plugs in. Then go to http://192.168.1.1 to upload and flash the firmware package. Signed-off-by: Jackson Ming Hu --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 671a578f80..a5c51c7c88 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -305,6 +305,12 @@ pbr-m1) ucidef_set_led_default "power" "power" "$boardname:blue:power" "1" ucidef_set_led_default "sys" "sys" "$boardname:blue:sys" "1" ;; +d-team,newifi-d2) + set_usb_led "$boardname:blue:usb" + ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10" + ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0" + ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1" + ;; psg1208) set_wifi_led "$boardname:white:wlan2g" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 947b0dd8ae..5a64bb727a 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -92,6 +92,7 @@ ramips_setup_interfaces() mt7628|\ mzk-750dhp|\ mzk-w300nh2|\ + d-team,newifi-d2|\ nixcore-x1-8M|\ nixcore-x1-16M|\ oy-0001|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 1d4b0eff3f..e7b49a5039 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -125,6 +125,7 @@ get_status_led() { d240|\ dap-1350|\ na930|\ + d-team,newifi-d2|\ pbr-m1|\ re350-v1|\ rt-ac51u|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index d95dcfe17a..68b47eeba0 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -107,6 +107,7 @@ platform_check_image() { nbg-419n|\ nbg-419n2|\ newifi-d1|\ + d-team,newifi-d2|\ nixcore-x1-8M|\ nixcore-x1-16M|\ nw718|\ diff --git a/target/linux/ramips/dts/Newifi-D2.dts b/target/linux/ramips/dts/Newifi-D2.dts new file mode 100644 index 0000000000..e919338e4e --- /dev/null +++ b/target/linux/ramips/dts/Newifi-D2.dts @@ -0,0 +1,159 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "d-team,newifi-d2", "mediatek,mt7621-soc"; + model = "Newifi-D2"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power-amber { + label = "newifi-d2:amber:power"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + power-blue { + label = "newifi-d2:blue:power"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + internet-amber { + label = "newifi-d2:amber:internet"; + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + }; + + internet-blue { + label = "newifi-d2:blue:internet"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "newifi-d2:blue:wlan2g"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "newifi-d2:blue:wlan5g"; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "newifi-d2:blue:usb"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + power_usb3 { + gpio-export,name = "power_usb3"; + gpio-export,output = <1>; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; +}; + +&pcie { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uart2", "uart3"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index ca1e3661b1..8ba65a1af2 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -142,6 +142,15 @@ define Device/newifi-d1 endef TARGET_DEVICES += newifi-d1 +define Device/d-team_newifi-d2 + DTS := Newifi-D2 + IMAGE_SIZE := $(ralink_default_fw_size_32M) + DEVICE_TITLE := Newifi D2 + DEVICE_PACKAGES := \ + kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += d-team_newifi-d2 + define Device/pbr-m1 DTS := PBR-M1 IMAGE_SIZE := $(ralink_default_fw_size_16M)