From: Ganesan Ramalingam Date: Tue, 29 Apr 2014 14:37:51 +0000 (+0530) Subject: MIPS: Netlogic: PIC freq calculation for XLP 9XX/2XX X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c065909e47aea3575e51304e7411b46df22b20ca;p=openwrt%2Fstaging%2Fblogic.git MIPS: Netlogic: PIC freq calculation for XLP 9XX/2XX Update PIC frequency calculation for XLP9XX and 2XX processors using the correct PLL registers. This should work for all possible board configurations. Signed-off-by: Ganesan Ramalingam Signed-off-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6876/ Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h index 14b2f5142c6e..805bfd21f33e 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h @@ -120,6 +120,8 @@ #define XLP9XX_IO_UART_OFFSET(node) XLP9XX_HDR_OFFSET(node, 2, 2) #define XLP9XX_IO_SYS_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 0) #define XLP9XX_IO_FUSE_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 1) +#define XLP9XX_IO_CLOCK_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 2) +#define XLP9XX_IO_POWER_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 3) #define XLP9XX_IO_JTAG_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 4) #define XLP9XX_IO_PCIE_OFFSET(node, i) XLP9XX_HDR_OFFSET(node, 1, i) diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h index d9b107ffca93..bcb136d224e6 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h @@ -147,6 +147,28 @@ #define SYS_SYS_PLL_MEM_REQ 0x2a3 #define SYS_PLL_MEM_STAT 0x2a4 +/* PLL registers XLP9XX */ +#define SYS_9XX_DMC_PLL_CTRL0 0x140 +#define SYS_9XX_DMC_PLL_CTRL1 0x141 +#define SYS_9XX_DMC_PLL_CTRL2 0x142 +#define SYS_9XX_DMC_PLL_CTRL3 0x143 +#define SYS_9XX_PLL_CTRL0 0x144 +#define SYS_9XX_PLL_CTRL1 0x145 +#define SYS_9XX_PLL_CTRL2 0x146 +#define SYS_9XX_PLL_CTRL3 0x147 + +#define SYS_9XX_PLL_CTRL0_DEVX(x) (0x148 + (x) * 4) +#define SYS_9XX_PLL_CTRL1_DEVX(x) (0x149 + (x) * 4) +#define SYS_9XX_PLL_CTRL2_DEVX(x) (0x14a + (x) * 4) +#define SYS_9XX_PLL_CTRL3_DEVX(x) (0x14b + (x) * 4) + +#define SYS_9XX_CPU_PLL_CHG_CTRL 0x188 +#define SYS_9XX_PLL_CHG_CTRL 0x189 +#define SYS_9XX_CLK_DEV_DIS 0x18a +#define SYS_9XX_CLK_DEV_SEL 0x18b +#define SYS_9XX_CLK_DEV_DIV 0x18d +#define SYS_9XX_CLK_DEV_CHG 0x18f + /* Registers changed on 9XX */ #define SYS_9XX_POWER_ON_RESET_CFG 0x00 #define SYS_9XX_CHIP_RESET 0x01 @@ -170,6 +192,11 @@ #define nlm_get_fuse_regbase(node) \ (nlm_get_fuse_pcibase(node) + XLP_IO_PCI_HDRSZ) +#define nlm_get_clock_pcibase(node) \ + nlm_pcicfg_base(XLP9XX_IO_CLOCK_OFFSET(node)) +#define nlm_get_clock_regbase(node) \ + (nlm_get_clock_pcibase(node) + XLP_IO_PCI_HDRSZ) + unsigned int nlm_get_pic_frequency(int node); #endif #endif diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c index 13391b8a6031..0c0a1a606f73 100644 --- a/arch/mips/netlogic/common/time.c +++ b/arch/mips/netlogic/common/time.c @@ -82,6 +82,7 @@ static struct clocksource csrc_pic = { static void nlm_init_pic_timer(void) { uint64_t picbase = nlm_get_node(0)->picbase; + u32 picfreq; nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0); if (current_cpu_data.cputype == CPU_XLR) { @@ -92,7 +93,9 @@ static void nlm_init_pic_timer(void) csrc_pic.read = nlm_get_pic_timer; } csrc_pic.rating = 1000; - clocksource_register_hz(&csrc_pic, pic_timer_freq()); + picfreq = pic_timer_freq(); + clocksource_register_hz(&csrc_pic, picfreq); + pr_info("PIC clock source added, frequency %d\n", picfreq); } void __init plat_time_init(void) diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c index 9f9814d646a9..59f1303b69d7 100644 --- a/arch/mips/netlogic/xlp/nlm_hal.c +++ b/arch/mips/netlogic/xlp/nlm_hal.c @@ -234,21 +234,28 @@ unsigned int nlm_get_core_frequency(int node, int core) return (unsigned int)num; } -/* Calculate Frequency to the PIC from PLL. - * freq_out = ( ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13 ) / - * ((2^ctrl0[7:5]) * Table(ctrl0[26:24])) +/* + * Calculate PIC frequency from PLL registers. + * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) / + * ((2^ctrl0[7:5]) * Table(ctrl0[26:24])) */ -static unsigned int nlm_2xx_get_pic_frequency(int node) +static unsigned int nlm_xlp2_get_pic_frequency(int node) { - u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div; + u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx; u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div; - u64 ref_clk, sysbase, pll_out_freq_num, ref_clk_select; + u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk; sysbase = nlm_get_node(node)->sysbase; + clockbase = nlm_get_clock_regbase(node); + cpu_xlp9xx = cpu_is_xlp9xx(); /* Find ref_clk_base */ - ref_clk_select = - (nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG) >> 18) & 0x3; + if (cpu_xlp9xx) + ref_clk_select = (nlm_read_sys_reg(sysbase, + SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3; + else + ref_clk_select = (nlm_read_sys_reg(sysbase, + SYS_POWER_ON_RESET_CFG) >> 18) & 0x3; switch (ref_clk_select) { case 0: ref_clk = 200000000ULL; @@ -269,30 +276,70 @@ static unsigned int nlm_2xx_get_pic_frequency(int node) } /* Find the clock source PLL device for PIC */ - reg_select = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_SEL) >> 22) & 0x3; - switch (reg_select) { - case 0: - ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0); - ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2); - break; - case 1: - ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(0)); - ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(0)); - break; - case 2: - ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(1)); - ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(1)); - break; - case 3: - ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(2)); - ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(2)); - break; + if (cpu_xlp9xx) { + reg_select = nlm_read_sys_reg(clockbase, + SYS_9XX_CLK_DEV_SEL) & 0x3; + switch (reg_select) { + case 0: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2); + break; + case 1: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(0)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(0)); + break; + case 2: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(1)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(1)); + break; + case 3: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(2)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(2)); + break; + } + } else { + reg_select = (nlm_read_sys_reg(sysbase, + SYS_CLK_DEV_SEL) >> 22) & 0x3; + switch (reg_select) { + case 0: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2); + break; + case 1: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(0)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(0)); + break; + case 2: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(1)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(1)); + break; + case 3: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(2)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(2)); + break; + } } vco_post_div = (ctrl_val0 >> 5) & 0x7; pll_post_div = (ctrl_val0 >> 24) & 0x7; mdiv = ctrl_val2 & 0xff; - fdiv = (ctrl_val2 >> 8) & 0xfff; + fdiv = (ctrl_val2 >> 8) & 0x1fff; /* Find PLL post divider value */ switch (pll_post_div) { @@ -322,7 +369,12 @@ static unsigned int nlm_2xx_get_pic_frequency(int node) do_div(pll_out_freq_num, pll_out_freq_den); /* PIC post divider, which happens after PLL */ - pic_div = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_DIV) >> 22) & 0x3; + if (cpu_xlp9xx) + pic_div = nlm_read_sys_reg(clockbase, + SYS_9XX_CLK_DEV_DIV) & 0x3; + else + pic_div = (nlm_read_sys_reg(sysbase, + SYS_CLK_DEV_DIV) >> 22) & 0x3; do_div(pll_out_freq_num, 1 << pic_div); return pll_out_freq_num; @@ -330,12 +382,8 @@ static unsigned int nlm_2xx_get_pic_frequency(int node) unsigned int nlm_get_pic_frequency(int node) { - /* TODO Has to calculate freq as like 2xx */ - if (cpu_is_xlp9xx()) - return 250000000; - if (cpu_is_xlpii()) - return nlm_2xx_get_pic_frequency(node); + return nlm_xlp2_get_pic_frequency(node); else return 133333333; }