From: Andre Przywara Date: Tue, 9 Jul 2019 12:54:56 +0000 (+0100) Subject: rpi3: Move VC mailbox driver into generic drivers directory X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c00311893d4bffb43b3f023259120d9dc5f78e36;p=project%2Fbcm63xx%2Fatf.git rpi3: Move VC mailbox driver into generic drivers directory To allow sharing the driver between the RPi3 and RPi4, move the mailbox driver into the generic driver directory. Change-Id: I463e49acf82b02bf004f3d56482b7791f3020bc0 Signed-off-by: Andre Przywara --- diff --git a/drivers/rpi3/mailbox/rpi3_mbox.c b/drivers/rpi3/mailbox/rpi3_mbox.c new file mode 100644 index 00000000..aef1f39a --- /dev/null +++ b/drivers/rpi3/mailbox/rpi3_mbox.c @@ -0,0 +1,82 @@ +/* + * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include +#include +#include + +#include + +#include + +#define RPI3_MAILBOX_MAX_RETRIES U(1000000) + +/******************************************************************************* + * Routine to send requests to the VideoCore using the mailboxes. + ******************************************************************************/ +void rpi3_vc_mailbox_request_send(rpi3_mbox_request_t *req, int req_size) +{ + uint32_t st, data; + uintptr_t resp_addr, addr; + unsigned int retries; + + /* This is the location of the request buffer */ + addr = (uintptr_t)req; + + /* Make sure that the changes are seen by the VideoCore */ + flush_dcache_range(addr, req_size); + + /* Wait until the outbound mailbox is empty */ + retries = 0U; + + do { + st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX1_STATUS_OFFSET); + + retries++; + if (retries == RPI3_MAILBOX_MAX_RETRIES) { + ERROR("rpi3: mbox: Send request timeout\n"); + return; + } + + } while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) == 0U); + + /* Send base address of this message to start request */ + mmio_write_32(RPI3_MBOX_BASE + RPI3_MBOX1_WRITE_OFFSET, + RPI3_CHANNEL_ARM_TO_VC | (uint32_t) addr); + + /* Wait until the inbound mailbox isn't empty */ + retries = 0U; + + do { + st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_STATUS_OFFSET); + + retries++; + if (retries == RPI3_MAILBOX_MAX_RETRIES) { + ERROR("rpi3: mbox: Receive response timeout\n"); + return; + } + + } while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) != 0U); + + /* Get location and channel */ + data = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_READ_OFFSET); + + if ((data & RPI3_CHANNEL_MASK) != RPI3_CHANNEL_ARM_TO_VC) { + ERROR("rpi3: mbox: Wrong channel: 0x%08x\n", data); + panic(); + } + + resp_addr = (uintptr_t)(data & ~RPI3_CHANNEL_MASK); + if (addr != resp_addr) { + ERROR("rpi3: mbox: Unexpected address: 0x%08x\n", data); + panic(); + } + + /* Make sure that the data seen by the CPU is up to date */ + inv_dcache_range(addr, req_size); +} diff --git a/include/drivers/rpi3/mailbox/rpi3_mbox.h b/include/drivers/rpi3/mailbox/rpi3_mbox.h new file mode 100644 index 00000000..c1074402 --- /dev/null +++ b/include/drivers/rpi3/mailbox/rpi3_mbox.h @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2019, Arm Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef RPI3_MBOX_H +#define RPI3_MBOX_H + +#include + +/* This struct must be aligned to 16 bytes */ +typedef struct __packed __aligned(16) rpi3_mbox_request { + uint32_t size; /* Buffer size in bytes */ + uint32_t code; /* Request/response code */ + uint32_t tags[0]; +} rpi3_mbox_request_t; + +#define RPI3_MBOX_BUFFER_SIZE U(256) + +/* Constants to perform a request/check the status of a request. */ +#define RPI3_MBOX_PROCESS_REQUEST U(0x00000000) +#define RPI3_MBOX_REQUEST_SUCCESSFUL U(0x80000000) +#define RPI3_MBOX_REQUEST_ERROR U(0x80000001) + +/* Command constants */ +#define RPI3_TAG_HARDWARE_GET_BOARD_REVISION U(0x00010002) +#define RPI3_TAG_END U(0x00000000) + +#define RPI3_TAG_REQUEST U(0x00000000) +#define RPI3_TAG_IS_RESPONSE U(0x80000000) /* Set if response */ +#define RPI3_TAG_RESPONSE_LENGTH_MASK U(0x7FFFFFFF) + +#define RPI3_CHANNEL_ARM_TO_VC U(0x8) +#define RPI3_CHANNEL_MASK U(0xF) + +void rpi3_vc_mailbox_request_send(rpi3_mbox_request_t *req, int req_size); + +#endif diff --git a/plat/rpi/rpi3/platform.mk b/plat/rpi/rpi3/platform.mk index c011c0a7..b0e7b709 100644 --- a/plat/rpi/rpi3/platform.mk +++ b/plat/rpi/rpi3/platform.mk @@ -21,7 +21,8 @@ BL1_SOURCES += drivers/io/io_fip.c \ plat/rpi/rpi3/aarch64/plat_helpers.S \ plat/rpi/rpi3/rpi3_bl1_setup.c \ plat/rpi/rpi3/rpi3_io_storage.c \ - plat/rpi/rpi3/rpi3_mbox.c + drivers/rpi3/mailbox/rpi3_mbox.c \ + plat/rpi/rpi3/rpi_mbox_board.c BL2_SOURCES += common/desc_image_load.c \ drivers/io/io_fip.c \ diff --git a/plat/rpi/rpi3/rpi3_mbox.c b/plat/rpi/rpi3/rpi3_mbox.c deleted file mode 100644 index 03b395e7..00000000 --- a/plat/rpi/rpi3/rpi3_mbox.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include - -#include - -#include -#include -#include - -#include - -/* This struct must be aligned to 16 bytes */ -typedef struct __packed __aligned(16) rpi3_mbox_request { - uint32_t size; /* Buffer size in bytes */ - uint32_t code; /* Request/response code */ - uint32_t tags[0]; -} rpi3_mbox_request_t; - -#define RPI3_MBOX_BUFFER_SIZE U(256) -static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE]; - -/* Constants to perform a request/check the status of a request. */ -#define RPI3_MBOX_PROCESS_REQUEST U(0x00000000) -#define RPI3_MBOX_REQUEST_SUCCESSFUL U(0x80000000) -#define RPI3_MBOX_REQUEST_ERROR U(0x80000001) - -/* Command constants */ -#define RPI3_TAG_HARDWARE_GET_BOARD_REVISION U(0x00010002) -#define RPI3_TAG_END U(0x00000000) - -#define RPI3_TAG_REQUEST U(0x00000000) -#define RPI3_TAG_IS_RESPONSE U(0x80000000) /* Set if response */ -#define RPI3_TAG_RESPONSE_LENGTH_MASK U(0x7FFFFFFF) - -#define RPI3_CHANNEL_ARM_TO_VC U(0x8) -#define RPI3_CHANNEL_MASK U(0xF) - -#define RPI3_MAILBOX_MAX_RETRIES U(1000000) - -/******************************************************************************* - * Helpers to send requests to the VideoCore using the mailboxes. - ******************************************************************************/ -static void rpi3_vc_mailbox_request_send(void) -{ - uint32_t st, data; - uintptr_t resp_addr, addr; - unsigned int retries; - - /* This is the location of the request buffer */ - addr = (uintptr_t) &rpi3_mbox_buffer; - - /* Make sure that the changes are seen by the VideoCore */ - flush_dcache_range(addr, RPI3_MBOX_BUFFER_SIZE); - - /* Wait until the outbound mailbox is empty */ - retries = 0U; - - do { - st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX1_STATUS_OFFSET); - - retries++; - if (retries == RPI3_MAILBOX_MAX_RETRIES) { - ERROR("rpi3: mbox: Send request timeout\n"); - return; - } - - } while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) == 0U); - - /* Send base address of this message to start request */ - mmio_write_32(RPI3_MBOX_BASE + RPI3_MBOX1_WRITE_OFFSET, - RPI3_CHANNEL_ARM_TO_VC | (uint32_t) addr); - - /* Wait until the inbound mailbox isn't empty */ - retries = 0U; - - do { - st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_STATUS_OFFSET); - - retries++; - if (retries == RPI3_MAILBOX_MAX_RETRIES) { - ERROR("rpi3: mbox: Receive response timeout\n"); - return; - } - - } while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) != 0U); - - /* Get location and channel */ - data = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_READ_OFFSET); - - if ((data & RPI3_CHANNEL_MASK) != RPI3_CHANNEL_ARM_TO_VC) { - ERROR("rpi3: mbox: Wrong channel: 0x%08x\n", data); - panic(); - } - - resp_addr = (uintptr_t)(data & ~RPI3_CHANNEL_MASK); - if (addr != resp_addr) { - ERROR("rpi3: mbox: Unexpected address: 0x%08x\n", data); - panic(); - } - - /* Make sure that the data seen by the CPU is up to date */ - inv_dcache_range(addr, RPI3_MBOX_BUFFER_SIZE); -} - -/******************************************************************************* - * Request board revision. Returns the revision and 0 on success, -1 on error. - ******************************************************************************/ -int rpi3_vc_hardware_get_board_revision(uint32_t *revision) -{ - uint32_t tag_request_size = sizeof(uint32_t); - rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer; - - assert(revision != NULL); - - VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req); - - req->size = sizeof(rpi3_mbox_buffer); - req->code = RPI3_MBOX_PROCESS_REQUEST; - - req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION; - req->tags[1] = tag_request_size; /* Space available for the response */ - req->tags[2] = RPI3_TAG_REQUEST; - req->tags[3] = 0; /* Placeholder for the response */ - - req->tags[4] = RPI3_TAG_END; - - rpi3_vc_mailbox_request_send(); - - if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) { - ERROR("rpi3: mbox: Code = 0x%08x\n", req->code); - return -1; - } - - if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) { - ERROR("rpi3: mbox: get board revision failed (0x%08x)\n", - req->tags[2]); - return -1; - } - - *revision = req->tags[3]; - - return 0; -} diff --git a/plat/rpi/rpi3/rpi_mbox_board.c b/plat/rpi/rpi3/rpi_mbox_board.c new file mode 100644 index 00000000..e7c1e2ba --- /dev/null +++ b/plat/rpi/rpi3/rpi_mbox_board.c @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include + +#include + +#include + +#define RPI3_MBOX_BUFFER_SIZE U(256) +static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE]; + +/******************************************************************************* + * Request board revision. Returns the revision and 0 on success, -1 on error. + ******************************************************************************/ +int rpi3_vc_hardware_get_board_revision(uint32_t *revision) +{ + uint32_t tag_request_size = sizeof(uint32_t); + rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer; + + assert(revision != NULL); + + VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req); + + req->size = sizeof(rpi3_mbox_buffer); + req->code = RPI3_MBOX_PROCESS_REQUEST; + + req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION; + req->tags[1] = tag_request_size; /* Space available for the response */ + req->tags[2] = RPI3_TAG_REQUEST; + req->tags[3] = 0; /* Placeholder for the response */ + + req->tags[4] = RPI3_TAG_END; + + rpi3_vc_mailbox_request_send(req, RPI3_MBOX_BUFFER_SIZE); + + if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) { + ERROR("rpi3: mbox: Code = 0x%08x\n", req->code); + return -1; + } + + if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) { + ERROR("rpi3: mbox: get board revision failed (0x%08x)\n", + req->tags[2]); + return -1; + } + + *revision = req->tags[3]; + + return 0; +}