From: Arvid E. Picciani Date: Mon, 16 Apr 2018 11:18:37 +0000 (+0200) Subject: ar71xx: add support for TP-LINK Archer C7 v5 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd;p=openwrt%2Fstaging%2Fnbd.git ar71xx: add support for TP-LINK Archer C7 v5 TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9563+QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 10x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin and rename it to ArcherC7v5_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Arvid E. Picciani --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index c8e10dae9c..d8039fdf6c 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -488,6 +488,7 @@ ar71xx_setup_interfaces() "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" ;; archer-c7-v4|\ + archer-c7-v5|\ tl-wdr4300|\ tl-wr1041n-v2) ucidef_add_switch "switch0" \ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 29fd244ab5..137baa935e 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -66,6 +66,7 @@ get_status_led() { archer-c60-v1|\ archer-c60-v2|\ archer-c7-v4|\ + archer-c7-v5|\ fritz300e|\ fritz4020|\ fritz450e|\ diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index c3ae7b64ec..0ed624efc8 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -65,7 +65,8 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; - archer-c7-v4) + archer-c7-v4|\ + archer-c7-v5) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 94add79ea9..b8f9a705ee 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -476,6 +476,9 @@ ar71xx_board_detect() { *"Archer C7 v4") name="archer-c7-v4" ;; + *"Archer C7 v5") + name="archer-c7-v5" + ;; *"Archer C58 v1") name="archer-c58-v1" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 9bc3f8564b..a7968b5bb0 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -212,6 +212,7 @@ platform_check_image() { archer-c60-v1|\ archer-c60-v2|\ archer-c7-v4|\ + archer-c7-v5|\ bullet-m|\ c-55|\ carambola2|\ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 6b6874a48e..996fd4c68a 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V2) += mach-archer-c60-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o +obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v5.o obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c new file mode 100644 index 0000000000..a80e0bd941 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c @@ -0,0 +1,207 @@ +/* + * Atheros ARCHER_C7 reference board support + * + * Copyright (c) 2018 Arvid E. Picciani + * Copyright (c) 2017 Felix Fietkau + * Copyright (c) 2014 The Linux Foundation. All rights reserved. + * Copyright (c) 2012 Gabor Juhos + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" + + +#define ARCHER_C7_GPIO_BTN_RESET 5 +#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2 + +#define ARCHER_C7_GPIO_LED_WLAN5 9 +#define ARCHER_C7_GPIO_LED_POWER 6 +#define ARCHER_C7_GPIO_LED_USB 7 +#define ARCHER_C7_GPIO_LED_WPS 1 +#define ARCHER_C7_GPIO_LED_LAN1 8 +#define ARCHER_C7_GPIO_LED_LAN2 17 +#define ARCHER_C7_GPIO_LED_LAN3 16 +#define ARCHER_C7_GPIO_LED_LAN4 15 +#define ARCHER_C7_GPIO_LED_WAN_GREEN 21 +#define ARCHER_C7_GPIO_LED_WAN_AMBER 20 +#define ARCHER_C7_GPIO_LED_WLAN2 14 +#define ARCHER_C7_GPIO_USB_PWR 19 + +#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL) + +#define ARCHER_C7_MAC0_OFFSET 0 +#define ARCHER_C7_MAC1_OFFSET 6 +#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000 + +#define ARCHER_C7_GPIO_MDC 3 +#define ARCHER_C7_GPIO_MDIO 4 + +static struct gpio_led archer_c7_v5_leds_gpio[] __initdata = { + { + .name = "archer-c7-v5:green:power", + .gpio = ARCHER_C7_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:wps", + .gpio = ARCHER_C7_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:wlan2g", + .gpio = ARCHER_C7_GPIO_LED_WLAN2, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:wlan5g", + .gpio = ARCHER_C7_GPIO_LED_WLAN5, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:lan1", + .gpio = ARCHER_C7_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:lan2", + .gpio = ARCHER_C7_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:lan3", + .gpio = ARCHER_C7_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:lan4", + .gpio = ARCHER_C7_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:wan", + .gpio = ARCHER_C7_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "archer-c7-v5:amber:wan", + .gpio = ARCHER_C7_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "archer-c7-v5:green:usb", + .gpio = ARCHER_C7_GPIO_LED_USB, + .active_low = 1, + }, +}; + +static struct gpio_keys_button archer_c7_v5_gpio_keys[] __initdata = { + { + .desc = "WPS and WIFI button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI, + .active_low = 1, + }, + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C7_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + + +static struct ar8327_pad_cfg archer_c7_v5_ar8337_pad0_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +static struct ar8327_platform_data archer_c7_v5_ar8337_data = { + .pad0_cfg = &archer_c7_v5_ar8337_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info archer_c7_v5_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &archer_c7_v5_ar8337_data, + }, +}; + + +static void __init archer_c7_v5_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1f050000); + u8 *mac = (u8 *) KSEG1ADDR(0x1f060008); + + ath79_register_m25p80(NULL); + + + ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v5_leds_gpio), + archer_c7_v5_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, + ARRAY_SIZE(archer_c7_v5_gpio_keys), + archer_c7_v5_gpio_keys); + + ath79_register_usb(); + + ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC); + ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO); + + ath79_register_mdio(0, 0x0); + + mdiobus_register_board_info(archer_c7_v5_mdio0_info, + ARRAY_SIZE(archer_c7_v5_mdio0_info)); + + gpio_request_one(ARCHER_C7_GPIO_USB_PWR, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); + + ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac); + ath79_register_pci(); + + /* GMAC0 is connected to an AR8337 switch */ + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V5, "ARCHER-C7-V5", "TP-LINK Archer C7 v5", + archer_c7_v5_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 992e080640..dce25c6fc8 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -52,6 +52,7 @@ enum ath79_mach_type { ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */ ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */ + ATH79_MACH_ARCHER_C7_V5, /* TP-LINK Archer C7 V5 board */ ATH79_MACH_ARDUINO_YUN, /* Yun */ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */ diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk index 429540a52c..6f7d608b01 100644 --- a/target/linux/ar71xx/image/generic-tp-link.mk +++ b/target/linux/ar71xx/image/generic-tp-link.mk @@ -141,6 +141,17 @@ define Device/archer-c7-v4 endef TARGET_DEVICES += archer-c7-v4 +define Device/archer-c7-v5 + $(Device/archer-c7-v4) + DEVICE_TITLE := TP-LINK Archer C7 v5 + BOARDNAME := ARCHER-C7-V5 + TPLINK_BOARD_ID := ARCHER-C7-V5 + IMAGE_SIZE := 15104k + MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,1536k@0xc0000(kernel),13824k(rootfs),15360k@0xc0000(firmware) + SUPPORTED_DEVICES := archer-c7-v5 +endef +TARGET_DEVICES += archer-c7-v5 + define Device/cpe510-520-v1 DEVICE_TITLE := TP-LINK CPE510/520 v1 DEVICE_PACKAGES := rssileds diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 27c5aa8497..10577cbaaf 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -578,6 +578,52 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system", }, + /** Firmware layout for the C7 v5*/ + { + .id = "ARCHER-C7-V5", + .support_list = + "SupportList:\n" + "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n" + "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n", + + .support_trail = '\x00', + .soft_ver = "soft_ver:1.0.0\n", + + /** + We use a bigger os-image partition than the stock images (and thus + smaller file-system), as our kernel doesn't fit in the stock firmware's + 1MB os-image. + */ + .partitions = { + {"factory-boot", 0x00000, 0x20000}, + {"fs-uboot", 0x20000, 0x20000}, + {"partition-table", 0x40000, 0x10000}, + {"radio", 0x50000, 0x10000}, + {"default-mac", 0x60000, 0x00200}, + {"pin", 0x60200, 0x00200}, + {"device-id", 0x60400, 0x00100}, + {"product-info", 0x60500, 0x0fb00}, + {"soft-version", 0x70000, 0x01000}, + {"extra-para", 0x71000, 0x01000}, + {"support-list", 0x72000, 0x0a000}, + {"profile", 0x7c000, 0x04000}, + {"user-config", 0x80000, 0x40000}, + + + {"os-image", 0xc0000, 0x180000}, /* Stock: base 0xc0000 size 0x120000 */ + {"file-system", 0x240000, 0xd80000}, /* Stock: base 0x1e0000 size 0xde0000 */ + + {"log", 0xfc0000, 0x20000}, + {"certificate", 0xfe0000, 0x10000}, + {"default-config", 0xff0000, 0x10000}, + {NULL, 0, 0} + + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system", + }, + /** Firmware layout for the C9 */ { .id = "ARCHERC9", @@ -1389,7 +1435,7 @@ static void build_image(const char *output, strcasecmp(info->id, "TLWR1043NV5") == 0) { const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00}; parts[5] = put_data("extra-para", mdat, 11); - } else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0) { + } else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) { const char mdat[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00}; parts[5] = put_data("extra-para", mdat, 11); }