From: Alagu Sankar Date: Mon, 25 Feb 2019 09:45:57 +0000 (+0200) Subject: ath10k: sdio: set hi_acs_flags X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bf1f0a1a4da14bbb7cab3e272e7fd008abde21ef;p=openwrt%2Fstaging%2Fblogic.git ath10k: sdio: set hi_acs_flags The SDIO firmware does not allow transmitting packets with the reduced tx completion HI_ACS option. SDIO firmware uses 1544 as alternate credit size, which is not big enough for the maximum sized mac80211 frames. Disable both these HI_ACS flags for SDIO. Co-developed-by: Wen Gong Signed-off-by: Alagu Sankar Signed-off-by: Wen Gong Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index ac2cf3f1c7b4..0c62a61b5eac 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -637,10 +637,16 @@ static void ath10k_init_sdio(struct ath10k *ar) ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99); ath10k_bmi_read32(ar, hi_acs_flags, ¶m); - param |= (HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET | - HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET | - HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE); + /* Data transfer is not initiated, when reduced Tx completion + * is used for SDIO. disable it until fixed + */ + param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET; + /* Alternate credit size of 1544 as used by SDIO firmware is + * not big enough for mac80211 / native wifi frames. disable it + */ + param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE; + param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; ath10k_bmi_write32(ar, hi_acs_flags, param); }