From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Wed, 6 May 2009 03:01:17 +0000 (+0000)
Subject: mv643xx_eth: minor register definition cleanup
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=becfad979d1875aca15ef2a1eda68782e7ac7769;p=openwrt%2Fstaging%2Fblogic.git

mv643xx_eth: minor register definition cleanup

Move the definitions for the SDMA and port serial configuration
register values to where all the other register definitions live,
and expand the shifts to 32 bit constants.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 92a867cf8d56..cc16f3e4d89c 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -88,7 +88,24 @@ static char mv643xx_eth_driver_version[] = "1.4";
 #define MAC_ADDR_LOW			0x0014
 #define MAC_ADDR_HIGH			0x0018
 #define SDMA_CONFIG			0x001c
+#define  TX_BURST_SIZE_16_64BIT		0x01000000
+#define  TX_BURST_SIZE_4_64BIT		0x00800000
+#define  BLM_TX_NO_SWAP			0x00000020
+#define  BLM_RX_NO_SWAP			0x00000010
+#define  RX_BURST_SIZE_16_64BIT		0x00000008
+#define  RX_BURST_SIZE_4_64BIT		0x00000004
 #define PORT_SERIAL_CONTROL		0x003c
+#define  SET_MII_SPEED_TO_100		0x01000000
+#define  SET_GMII_SPEED_TO_1000		0x00800000
+#define  SET_FULL_DUPLEX_MODE		0x00200000
+#define  MAX_RX_PACKET_9700BYTE		0x000a0000
+#define  DISABLE_AUTO_NEG_SPEED_GMII	0x00002000
+#define  DO_NOT_FORCE_LINK_FAIL		0x00000400
+#define  SERIAL_PORT_CONTROL_RESERVED	0x00000200
+#define  DISABLE_AUTO_NEG_FOR_FLOW_CTRL	0x00000008
+#define  DISABLE_AUTO_NEG_FOR_DUPLEX	0x00000004
+#define  FORCE_LINK_PASS		0x00000002
+#define  SERIAL_PORT_ENABLE		0x00000001
 #define PORT_STATUS			0x0044
 #define  TX_FIFO_EMPTY			0x00000400
 #define  TX_IN_PROGRESS			0x00000080
@@ -135,15 +152,8 @@ static char mv643xx_eth_driver_version[] = "1.4";
 
 
 /*
- * SDMA configuration register.
+ * SDMA configuration register default value.
  */
-#define RX_BURST_SIZE_4_64BIT		(2 << 1)
-#define RX_BURST_SIZE_16_64BIT		(4 << 1)
-#define BLM_RX_NO_SWAP			(1 << 4)
-#define BLM_TX_NO_SWAP			(1 << 5)
-#define TX_BURST_SIZE_4_64BIT		(2 << 22)
-#define TX_BURST_SIZE_16_64BIT		(4 << 22)
-
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
 		(RX_BURST_SIZE_4_64BIT	|	\
@@ -160,22 +170,10 @@ static char mv643xx_eth_driver_version[] = "1.4";
 
 
 /*
- * Port serial control register.
+ * Misc definitions.
  */
-#define SET_MII_SPEED_TO_100			(1 << 24)
-#define SET_GMII_SPEED_TO_1000			(1 << 23)
-#define SET_FULL_DUPLEX_MODE			(1 << 21)
-#define MAX_RX_PACKET_9700BYTE			(5 << 17)
-#define DISABLE_AUTO_NEG_SPEED_GMII		(1 << 13)
-#define DO_NOT_FORCE_LINK_FAIL			(1 << 10)
-#define SERIAL_PORT_CONTROL_RESERVED		(1 << 9)
-#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL		(1 << 3)
-#define DISABLE_AUTO_NEG_FOR_DUPLEX		(1 << 2)
-#define FORCE_LINK_PASS				(1 << 1)
-#define SERIAL_PORT_ENABLE			(1 << 0)
-
-#define DEFAULT_RX_QUEUE_SIZE		128
-#define DEFAULT_TX_QUEUE_SIZE		256
+#define DEFAULT_RX_QUEUE_SIZE	128
+#define DEFAULT_TX_QUEUE_SIZE	256
 
 
 /*