From: Will Deacon Date: Fri, 7 Sep 2012 17:24:53 +0000 (+0100) Subject: ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loop X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=beafa0de3d3e0d0ece7638cded879815f359f1cb;p=openwrt%2Fstaging%2Fblogic.git ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loop The delay functions may be called by some platforms between switching to the timer-based delay loop but before calibration. In this case, the initial loops_per_jiffy may not be suitable for the timer (although a compromise may be achievable) and delay times may be considered too inaccurate. This patch updates loops_per_jiffy when switching to the timer-based delay loop so that delays are consistent prior to calibration. Signed-off-by: Will Deacon Signed-off-by: Russell King --- diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index d6dacc69254e..395d5fbb8fa2 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq) { pr_info("Switching to timer-based delay loop\n"); lpj_fine = freq / HZ; + loops_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay;