From: Sebastian Schaper <openwrt@sebastianschaper.net>
Date: Wed, 25 Aug 2021 20:00:08 +0000 (+0200)
Subject: ath79: move cal-data extraction to dts for DAP-2695
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=be88f416db0a7ba7064c1b8bcb9556452d0729d3;p=openwrt%2Fstaging%2Frobimarko.git

ath79: move cal-data extraction to dts for DAP-2695

This device can be merged with the existing dtsi, which declares
the location of ath9k cal-data via devicetree, correcting the 2.4G
mac address in `10_fix_wifi_mac` rather than `10-ath9k-eeprom`.

To make these changes more visible, apply before merging with dtsi.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
---

diff --git a/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts b/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts
index 53b1e03da6..0317f1eabb 100644
--- a/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts
+++ b/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts
@@ -160,5 +160,5 @@
 &wmac {
 	status = "okay";
 
-	qca,no-eeprom;
+	mtd-cal-data = <&art 0x1000>;
 };
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 9a3054e276..da78e74dcb 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -18,10 +18,6 @@ case "$FIRMWARE" in
 	avm,fritzdvbc)
 		caldata_extract_reverse "urlader" 0x1541 0x440
 		;;
-	dlink,dap-2695-a1)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii bdcfg "wlanmac")
-		;;
 	dlink,dir-505|\
 	dlink,dir-825-c1|\
 	dlink,dir-835-a1)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index ac8b59c538..a4f82c54e2 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -28,6 +28,7 @@ case "$board" in
 		;;
 	dlink,dap-2660-a1|\
 	dlink,dap-2680-a1|\
+	dlink,dap-2695-a1|\
 	dlink,dap-3662-a1)
 		[ "$PHYNBR" -eq 1 ] && \
 			mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress