From: Jonas Gorski Date: Sun, 29 Oct 2017 22:12:20 +0000 (+0100) Subject: ar7: unbreak serial console X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=be11b3b1c71945fbac359104a21d55f245800c7b;p=openwrt%2Fstaging%2Fthess.git ar7: unbreak serial console Serial output was broken since 3.16 for shared uarts between kernel and login. Fix this by adding a fix sent upstream. While at it, drop a useless patch that adds duplicate code. Signed-off-by: Jonas Gorski --- diff --git a/target/linux/ar7/patches-3.18/002-MIPS-AR7-ensure-the-port-type-s-FCR-value-is-used.patch b/target/linux/ar7/patches-3.18/002-MIPS-AR7-ensure-the-port-type-s-FCR-value-is-used.patch new file mode 100644 index 0000000000..f6a8754864 --- /dev/null +++ b/target/linux/ar7/patches-3.18/002-MIPS-AR7-ensure-the-port-type-s-FCR-value-is-used.patch @@ -0,0 +1,48 @@ +From ee6c9d41de084b2cefd90e5e0c9f30a35f6d3967 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 29 Oct 2017 15:50:42 +0100 +Subject: [PATCH RFC 3/3] MIPS: AR7: ensure the port type's FCR value is used + +Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt +trigger I/F of FIFO buffers"), the port's default FCR value isn't used +in serial8250_do_set_termios anymore, but copied over once in +serial8250_config_port and then modified as needed. + +Unfortunately, serial8250_config_port will never be called if the port +is shared between kernel and userspace, and the port's flag doesn't have +UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well. + +This causes garbled output from userspace: + +[ 5.220000] random: procd urandom read with 49 bits of entropy available +ers + [kee + +Fix this by forcing it to be configured on boot, resulting in the +expected output: + +[ 5.250000] random: procd urandom read with 50 bits of entropy available +Press the [f] key and hit [enter] to enter failsafe mode +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level + +Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers") +Signed-off-by: Jonas Gorski +--- +I'm not sure if this is just AR7's issue, or if this points to a general +issue for UARTs used as kernel console and login console with the "fixed" +commit. + + arch/mips/ar7/platform.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/ar7/platform.c ++++ b/arch/mips/ar7/platform.c +@@ -581,7 +581,7 @@ static int __init ar7_register_uarts(voi + uart_port.type = PORT_AR7; + uart_port.uartclk = clk_get_rate(bus_clk) / 2; + uart_port.iotype = UPIO_MEM32; +- uart_port.flags = UPF_FIXED_TYPE; ++ uart_port.flags = UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF; + uart_port.regshift = 2; + + uart_port.line = 0; diff --git a/target/linux/ar7/patches-3.18/500-serial_kludge.patch b/target/linux/ar7/patches-3.18/500-serial_kludge.patch deleted file mode 100644 index fc725309a8..0000000000 --- a/target/linux/ar7/patches-3.18/500-serial_kludge.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/tty/serial/8250/8250_core.c -+++ b/drivers/tty/serial/8250/8250_core.c -@@ -329,6 +329,13 @@ static const struct serial8250_config ua - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_AFE, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - /* Uart divisor latch read */ -@@ -3168,7 +3175,11 @@ static void serial8250_console_putchar(s - { - struct uart_8250_port *up = up_to_u8250p(port); - -+#ifdef CONFIG_AR7 -+ wait_for_xmitr(up, BOTH_EMPTY); -+#else - wait_for_xmitr(up, UART_LSR_THRE); -+#endif - serial_port_out(port, UART_TX, ch); - } - diff --git a/target/linux/ar7/patches-3.18/950-cpmac_titan.patch b/target/linux/ar7/patches-3.18/950-cpmac_titan.patch index f1d432cc4c..3cabae067a 100644 --- a/target/linux/ar7/patches-3.18/950-cpmac_titan.patch +++ b/target/linux/ar7/patches-3.18/950-cpmac_titan.patch @@ -1,6 +1,6 @@ --- a/drivers/net/ethernet/ti/cpmac.c +++ b/drivers/net/ethernet/ti/cpmac.c -@@ -1146,6 +1146,8 @@ static int cpmac_probe(struct platform_d +@@ -1147,6 +1147,8 @@ static int cpmac_probe(struct platform_d goto out; } @@ -9,7 +9,7 @@ dev->irq = platform_get_irq_byname(pdev, "irq"); dev->netdev_ops = &cpmac_netdev_ops; -@@ -1227,7 +1229,7 @@ int cpmac_init(void) +@@ -1228,7 +1230,7 @@ int cpmac_init(void) cpmac_mii->reset = cpmac_mdio_reset; cpmac_mii->irq = mii_irqs; @@ -18,8 +18,8 @@ if (!cpmac_mii->priv) { pr_err("Can't ioremap mdio registers\n"); -@@ -1238,10 +1240,16 @@ int cpmac_init(void) - #warning FIXME: unhardcode gpio&reset bits +@@ -1239,10 +1241,16 @@ int cpmac_init(void) + /* FIXME: unhardcode gpio&reset bits */ ar7_gpio_disable(26); ar7_gpio_disable(27); - ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); @@ -37,7 +37,7 @@ cpmac_mii->reset(cpmac_mii); for (i = 0; i < 300; i++) { -@@ -1258,7 +1266,11 @@ int cpmac_init(void) +@@ -1259,7 +1267,11 @@ int cpmac_init(void) mask = 0; }