From: Hauke Mehrtens Date: Sun, 30 Mar 2014 19:08:37 +0000 (+0000) Subject: kernel: backport BCM5357 fix for GPIOs X-Git-Tag: v19.07.0-rc1~18215 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bdde12b13a1ccba68a050868f1607b0a99168bb5;p=openwrt%2Fstaging%2Fhauke.git kernel: backport BCM5357 fix for GPIOs This backports: bcma: gpio: register 32 GPIOs on BCM5357 Signed-off-by: Rafał Miłecki Signed-off-by: Hauke Mehrtens SVN-Revision: 40347 --- diff --git a/target/linux/generic/patches-3.10/025-bcma_backport.patch b/target/linux/generic/patches-3.10/025-bcma_backport.patch index ca911cdcc2..c3f7ffb354 100644 --- a/target/linux/generic/patches-3.10/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.10/025-bcma_backport.patch @@ -479,17 +479,26 @@ chip->label = "bcma_gpio"; chip->owner = THIS_MODULE; -@@ -95,7 +215,9 @@ int bcma_gpio_init(struct bcma_drv_cc *c +@@ -95,8 +215,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c chip->set = bcma_gpio_set_value; chip->direction_input = bcma_gpio_direction_input; chip->direction_output = bcma_gpio_direction_output; +#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC) chip->to_irq = bcma_gpio_to_irq; +- chip->ngpio = 16; +#endif - chip->ngpio = 16; ++ switch (cc->core->bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM5357: ++ chip->ngpio = 32; ++ break; ++ default: ++ chip->ngpio = 16; ++ } ++ /* There is just one SoC in one device and its GPIO addresses should be * deterministic to address them more easily. The other buses could get -@@ -105,10 +227,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c + * a random base number. */ +@@ -105,10 +234,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c else chip->base = -1; diff --git a/target/linux/generic/patches-3.12/025-bcma_backport.patch b/target/linux/generic/patches-3.12/025-bcma_backport.patch index 3e86f69f42..1b88dfdda0 100644 --- a/target/linux/generic/patches-3.12/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.12/025-bcma_backport.patch @@ -198,17 +198,26 @@ chip->label = "bcma_gpio"; chip->owner = THIS_MODULE; -@@ -95,7 +215,9 @@ int bcma_gpio_init(struct bcma_drv_cc *c +@@ -95,8 +215,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c chip->set = bcma_gpio_set_value; chip->direction_input = bcma_gpio_direction_input; chip->direction_output = bcma_gpio_direction_output; +#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC) chip->to_irq = bcma_gpio_to_irq; +- chip->ngpio = 16; +#endif - chip->ngpio = 16; ++ switch (cc->core->bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM5357: ++ chip->ngpio = 32; ++ break; ++ default: ++ chip->ngpio = 16; ++ } ++ /* There is just one SoC in one device and its GPIO addresses should be * deterministic to address them more easily. The other buses could get -@@ -105,10 +227,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c + * a random base number. */ +@@ -105,10 +234,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c else chip->base = -1; diff --git a/target/linux/generic/patches-3.13/025-bcma_backport.patch b/target/linux/generic/patches-3.13/025-bcma_backport.patch index 3aad2a16db..dcb712dbbc 100644 --- a/target/linux/generic/patches-3.13/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.13/025-bcma_backport.patch @@ -198,17 +198,26 @@ chip->label = "bcma_gpio"; chip->owner = THIS_MODULE; -@@ -95,7 +215,9 @@ int bcma_gpio_init(struct bcma_drv_cc *c +@@ -95,8 +215,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c chip->set = bcma_gpio_set_value; chip->direction_input = bcma_gpio_direction_input; chip->direction_output = bcma_gpio_direction_output; +#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC) chip->to_irq = bcma_gpio_to_irq; +- chip->ngpio = 16; +#endif - chip->ngpio = 16; ++ switch (cc->core->bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM5357: ++ chip->ngpio = 32; ++ break; ++ default: ++ chip->ngpio = 16; ++ } ++ /* There is just one SoC in one device and its GPIO addresses should be * deterministic to address them more easily. The other buses could get -@@ -105,10 +227,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c + * a random base number. */ +@@ -105,10 +234,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c else chip->base = -1; diff --git a/target/linux/generic/patches-3.14/025-bcma_backport.patch b/target/linux/generic/patches-3.14/025-bcma_backport.patch new file mode 100644 index 0000000000..b49d345473 --- /dev/null +++ b/target/linux/generic/patches-3.14/025-bcma_backport.patch @@ -0,0 +1,18 @@ +--- a/drivers/bcma/driver_gpio.c ++++ b/drivers/bcma/driver_gpio.c +@@ -218,7 +218,14 @@ int bcma_gpio_init(struct bcma_drv_cc *c + #if IS_BUILTIN(CONFIG_BCMA_HOST_SOC) + chip->to_irq = bcma_gpio_to_irq; + #endif +- chip->ngpio = 16; ++ switch (cc->core->bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM5357: ++ chip->ngpio = 32; ++ break; ++ default: ++ chip->ngpio = 16; ++ } ++ + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get + * a random base number. */