From: Mikhail Zhilkin Date: Fri, 18 Mar 2022 18:09:45 +0000 (+0000) Subject: ramips: add support for Beeline SmartBox GIGA X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bd783fd60a5f9513aa405437efff55fe29cd89c2;p=openwrt%2Fstaging%2Fthess.git ramips: add support for Beeline SmartBox GIGA Beeline SmartBox GIGA is a wireless WiFi 5 router manufactured by Sercomm company. Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 256 MiB, Nanya NT5CC128M16JR-EK Flash: 128 MiB, Macronix MX30LF1G18AC Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2 Wireless 5 GHz (MT7613BE): a/n/ac, 2x2 Ethernet: 3 ports - 2xGbE (WAN, LAN1), 1xFE (LAN2) USB ports: 1xUSB3.0 Button: 1 button (Reset/WPS) PCB ID: DBE00B-1.6MM LEDs: 1 RGB LED Power: 12 VDC, 1.5 A Connector type: barrel Bootloader: U-Boot Installation ----------------- 1. Downgrade stock (Beeline) firmware to v.1.0.02; 2. Give factory OpenWrt image a shorter name, e.g. 1001.img; 3. Upload and update the firmware via the original web interface. Remark: You might need make the 3rd step twice if your running firmware is booted from the Slot 1 (Sercomm0 bootflag). The stock firmware reverses the bootflag (Sercomm0 / Sercomm1) on each firmware update. Revert to stock --------------- 1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 2. Optional: Update with any stock (Beeline) firmware if you want to overwrite OpenWrt in Slot 0 completely. MAC Addresses ------------- +-----+-----------+---------+ | use | address | example | +-----+-----------+---------+ | LAN | label | *:16 | | WAN | label + 1 | *:17 | | 2g | label + 4 | *:1a | | 5g | label + 5 | *:1b | +-----+-----------+---------+ The label MAC address was found in Factory 0x21000 Notes ----- 1. The following scripts are required for the build: sercomm-crypto.py - already exists in OpenWrt sercomm-partition-tag.py - already exists in OpenWrt sercomm-payload.py - already exists in OpenWrt sercomm-pid.py - new, the part of this pull request sercomm-kernel-header.py - new, the part of this pull request 2. This device (same as other Sercomm S2,S3-based devices) requires special LZMA and LOADADDR settings for successful boot: LZMA_TEXT_START=0x82800000 KERNEL_LOADADDR=0x81001000 LOADADDR=0x80001000 3. This device (same as several other Sercomm-based devices - Beeline, Netgear, Etisalat, Rostelecom) has partition map (mtd1) containing real partition offsets, which may differ from device to device depending on the number and location of bad blocks on NAND. "fixed-partitions" is used if the partition map is not found or corrupted. This behavour (it's the same as on stock firmware) is provided by MTD_SERCOMM_PARTS module. Signed-off-by: Mikhail Zhilkin --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index eebc08d65d..2034749832 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -31,6 +31,9 @@ ampedwireless,ally-00x19k|\ ampedwireless,ally-r1900k) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4" ;; +beeline,smartbox-giga) + ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000" + ;; buffalo,wsr-1166dhp|\ buffalo,wsr-600dhp|\ mediatek,linkit-smart-7688|\ diff --git a/target/linux/ramips/dts/mt7621_beeline_smartbox-giga.dts b/target/linux/ramips/dts/mt7621_beeline_smartbox-giga.dts new file mode 100644 index 0000000000..efea79e2e2 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_beeline_smartbox-giga.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + compatible = "beeline,smartbox-giga", "mediatek,mt7621-soc"; + model = "Beeline SmartBox GIGA"; + + aliases { + label-mac-device = &gmac0; + + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_red; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: led-0 { + label = "green:status"; + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + label = "blue:wan"; + color = ; + function = LED_FUNCTION_WAN; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + led_status_red: led-2 { + label = "red:status"; + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + ubi-concat { + compatible = "mtd-concat"; + devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 \ + &ubiconcat3>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x0 0x5400000>; + }; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "sercomm,sc-partitions", "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + sercomm,scpart-id = <0>; + read-only; + }; + + partition@100000 { + label = "dynamic partition map"; + reg = <0x100000 0x100000>; + sercomm,scpart-id = <1>; + }; + + factory: partition@200000 { + label = "Factory"; + reg = <0x200000 0x100000>; + sercomm,scpart-id = <2>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_21000: macaddr@21000 { + reg = <0x21000 0x6>; + }; + }; + + partition@300000 { + label = "Boot Flag"; + reg = <0x300000 0x100000>; + sercomm,scpart-id = <3>; + }; + + partition@400000 { + label = "kernel"; + reg = <0x400000 0x600000>; + sercomm,scpart-id = <4>; + }; + + partition@a00000 { + label = "Kernel 2"; + reg = <0xa00000 0x600000>; + sercomm,scpart-id = <5>; + read-only; + }; + + ubiconcat0: partition@1000000 { + label = "File System 1"; + reg = <0x1000000 0x1800000>; + sercomm,scpart-id = <6>; + }; + + partition@2800000 { + label = "File System 2"; + reg = <0x2800000 0x1800000>; + sercomm,scpart-id = <7>; + read-only; + }; + + ubiconcat1: partition@4000000 { + label = "Configuration/log"; + reg = <0x4000000 0x800000>; + sercomm,scpart-id = <8>; + }; + + ubiconcat2: partition@4800000 { + label = "application tmp buffer (Ftool)"; + reg = <0x4800000 0xc00000>; + sercomm,scpart-id = <9>; + }; + + ubiconcat3: partition@5400000 { + label = "container"; + reg = <0x5400000 0x2800000>; + sercomm,scpart-id = <10>; + }; + + partition@7c00000 { + label = "bad block reserved"; + reg = <0x7c00000 0x380000>; + sercomm,scpart-id = <11>; + read-only; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + nvmem-cells = <&macaddr_factory_21000>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(5)>; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + ieee80211-freq-limit = <2400000 2500000>; + + nvmem-cells = <&macaddr_factory_21000>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(4)>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_21000>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "wan"; + + nvmem-cells = <&macaddr_factory_21000>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(1)>; + }; + + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@2 { + status = "okay"; + label = "lan2"; + }; + }; +}; + +&uartlite3 { + status = "okay"; +}; + +&state_default { + gpio { + groups = "i2c", "jtag"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index f481e6e447..d48b220231 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -5,7 +5,7 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk -DEVICE_VARS += LOADER_TYPE LOADER_FLASH_OFFS +DEVICE_VARS += LOADER_TYPE LOADER_FLASH_OFFS LZMA_TEXT_START DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK @@ -22,6 +22,7 @@ ldrplatform-$(CONFIG_TARGET_ramips_mt7621) := mt7621 ldrflashstart-y := 0x1c000000 ldrflashstart-$(CONFIG_TARGET_ramips_mt7621) := 0x1fc00000 +LOADADDR := $(loadaddr-y) LOADER_PLATFORM := $(ldrplatform-y) LOADER_FLASH_START := $(ldrflashstart-y) @@ -45,7 +46,8 @@ define Build/loader-common PKG_BUILD_DIR="$@.src" \ TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \ BOARD="$(BOARDNAME)" PLATFORM="$(LOADER_PLATFORM)" \ - LZMA_TEXT_START=0x81800000 LOADADDR=$(KERNEL_LOADADDR) \ + LZMA_TEXT_START=$(LZMA_TEXT_START) \ + LOADADDR=$(LOADADDR) \ $(1) compile loader.$(LOADER_TYPE) mv "$@.$(LOADER_TYPE)" "$@" rm -rf $@.src @@ -176,6 +178,7 @@ define Device/Default PROFILES = Default KERNEL := $(KERNEL_DTB) | uImage lzma KERNEL_LOADADDR := $(loadaddr-y) + LZMA_TEXT_START := 0x81800000 SOC := $(DEFAULT_SOC) DEVICE_DTS_DIR := ../dts DEVICE_DTS = $$(SOC)_$(1) diff --git a/target/linux/ramips/image/common-sercomm.mk b/target/linux/ramips/image/common-sercomm.mk new file mode 100644 index 0000000000..e96cba879c --- /dev/null +++ b/target/linux/ramips/image/common-sercomm.mk @@ -0,0 +1,87 @@ +DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_ROOTFS_OFFSET + +define Build/sercomm-crypto + $(TOPDIR)/scripts/sercomm-crypto.py \ + --input-file $@ \ + --key-file $@.key \ + --output-file $@.ser \ + --version $(SERCOMM_SWVER) + $(STAGING_DIR_HOST)/bin/openssl enc -md md5 -aes-256-cbc \ + -in $@ \ + -out $@.enc \ + -K `cat $@.key` \ + -iv 00000000000000000000000000000000 + dd if=$@.enc >> $@.ser 2>/dev/null + mv $@.ser $@ + rm -f $@.enc $@.key +endef + +define Build/sercomm-kernel + $(TOPDIR)/scripts/sercomm-kernel-header.py \ + --kernel-image $@ \ + --kernel-offset $(SERCOMM_KERNEL_OFFSET) \ + --rootfs-offset $(SERCOMM_ROOTFS_OFFSET) \ + --output-header $@.hdr + dd if=$@ >> $@.hdr 2>/dev/null + mv $@.hdr $@ +endef + +define Build/sercomm-part-tag + $(call Build/sercomm-part-tag-common,$(word 1,$(1)) $@) +endef + +define Build/sercomm-part-tag-common + $(eval file=$(word 2,$(1))) + $(TOPDIR)/scripts/sercomm-partition-tag.py \ + --input-file $(file) \ + --output-file $(file).tmp \ + --part-name $(word 1,$(1)) \ + --part-version $(SERCOMM_SWVER) + mv $(file).tmp $(file) +endef + +define Build/sercomm-payload + $(TOPDIR)/scripts/sercomm-pid.py \ + --hw-version $(SERCOMM_HWVER) \ + --hw-id $(SERCOMM_HWID) \ + --sw-version $(SERCOMM_SWVER) \ + --pid-file $@.pid \ + --extra-padding-size 0x10 \ + --extra-padding-first-byte 0x0a + $(TOPDIR)/scripts/sercomm-payload.py \ + --input-file $@ \ + --output-file $@.tmp \ + --pid "$$(cat $@.pid | od -t x1 -An -v | tr -d '\n')" + mv $@.tmp $@ + rm $@.pid +endef + +define Build/sercomm-prepend-tagged-kernel + $(CP) $(IMAGE_KERNEL) $(IMAGE_KERNEL).tagged + $(call Build/sercomm-part-tag-common,$(word 1,$(1)) \ + $(IMAGE_KERNEL).tagged) + dd if=$@ >> $(IMAGE_KERNEL).tagged 2>/dev/null + mv $(IMAGE_KERNEL).tagged $@ +endef + +define Device/sercomm_dxx + $(Device/dsa-migration) + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 6144k + UBINIZE_OPTS := -E 5 + LOADER_TYPE := bin + KERNEL_LOADADDR := 0x81001000 + LZMA_TEXT_START := 0x82800000 + KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma -a0 | \ + uImage lzma | sercomm-kernel + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \ + lzma -a0 | uImage lzma + IMAGES += factory.img + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.img := append-ubi | sercomm-part-tag rootfs | \ + sercomm-prepend-tagged-kernel kernel | gzip | sercomm-payload | \ + sercomm-crypto + SERCOMM_KERNEL_OFFSET := 0x400100 + SERCOMM_ROOTFS_OFFSET := 0x1000000 +endef diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index aa7adeee60..f79ba5fb5a 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -2,6 +2,7 @@ # MT7621 Profiles # +include ./common-sercomm.mk include ./common-tp-link.mk DEFAULT_SOC := mt7621 @@ -285,6 +286,19 @@ define Device/beeline_smartbox-flash endef TARGET_DEVICES += beeline_smartbox-flash +define Device/beeline_smartbox-giga + $(Device/sercomm_dxx) + IMAGE_SIZE := 24576k + SERCOMM_HWID := DBE + SERCOMM_HWVER := 10100 + SERCOMM_SWVER := 1001 + DEVICE_VENDOR := Beeline + DEVICE_MODEL := SmartBox GIGA + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \ + kmod-usb3 uboot-envtools +endef +TARGET_DEVICES += beeline_smartbox-giga + define Device/buffalo_wsr-1166dhp $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 37207a52d3..0caa23feac 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -23,7 +23,8 @@ asus,rt-n56u-b1) ucidef_set_led_netdev "lan" "LAN link" "blue:lan" "br-lan" ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan" ;; -beeline,smartbox-flash) +beeline,smartbox-flash|\ +beeline,smartbox-giga) ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" ;; cudy,wr2100) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 29336bad68..8abee198a5 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -42,6 +42,7 @@ ramips_setup_interfaces() ;; asiarf,ap7621-nv1|\ beeline,smartbox-flash|\ + beeline,smartbox-giga|\ glinet,gl-mt1300|\ iptime,a3002mesh|\ jcg,q20|\ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index b4dc34fbec..7d44fcf90f 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -55,6 +55,7 @@ platform_do_upgrade() { asus,rt-ac85p|\ asus,rt-ax53u|\ beeline,smartbox-flash|\ + beeline,smartbox-giga|\ dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1|\ diff --git a/target/linux/ramips/mt7621/config-5.10 b/target/linux/ramips/mt7621/config-5.10 index 804dbe3edb..182da755cf 100644 --- a/target/linux/ramips/mt7621/config-5.10 +++ b/target/linux/ramips/mt7621/config-5.10 @@ -162,6 +162,7 @@ CONFIG_MTD_NAND_MTK_BMT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_ROUTERBOOT_PARTS=y +CONFIG_MTD_SERCOMM_PARTS=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y CONFIG_MTD_SPLIT_FIT_FW=y diff --git a/target/linux/ramips/mt7621/config-5.15 b/target/linux/ramips/mt7621/config-5.15 index 02d934e11b..3072a5177e 100644 --- a/target/linux/ramips/mt7621/config-5.15 +++ b/target/linux/ramips/mt7621/config-5.15 @@ -169,6 +169,7 @@ CONFIG_MTD_NAND_MTK_BMT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_ROUTERBOOT_PARTS=y +CONFIG_MTD_SERCOMM_PARTS=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y CONFIG_MTD_SPLIT_FIT_FW=y