From: Tim Harvey <tharvey@gateworks.com>
Date: Fri, 12 Jan 2024 19:34:28 +0000 (-0800)
Subject: imx: add Gateworks Venice support
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bd512e368fb488c441ef4c81fd61c89459043f2c;p=openwrt%2Fstaging%2Fthess.git

imx: add Gateworks Venice support

Add support for Gateworks Venice imx8m family of boards:
 - required kernel modules for on-board devices
 - image generation
 - initial network config
 - sysupgrade support

The resulting compressed disk image
(bin/targets/imx/cortexa53/openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz)
can be installed on a Gateworks venice board via U-Boot:

u-boot=> tftpboot $loadaddr openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz && \
         gzwrite mmc $dev $loadaddr $filesize

WARNING: this will overwrite any boot firmware on the eMMC user hardware
partition which if being used will brick your board requiring JTAG to
re-program boot firmware and recover

The compressed disk image contains the partition table and filesystems only
and that it is expected that boot firmware is installed properly on the
eMMC boot0 hardware partition. The easiest way to ensure this is to
use the Gateworks JTAG adapter/process to install the latest boot firmware
as follows from a Linux host:
  wget http://dev.gateworks.com/jtag/jtag_usbv4
  chmod +x jtag_usbv4
  wget http://dev.gateworks.com/venice/images/firmware-venice-imx8mm.bin
  sudo ./jtag_usbv4 -p firmware-venice-imx8mm.bin

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/target/linux/imx/cortexa53/base-files/etc/board.d/02_network b/target/linux/imx/cortexa53/base-files/etc/board.d/02_network
new file mode 100644
index 0000000000..c6049824e0
--- /dev/null
+++ b/target/linux/imx/cortexa53/base-files/etc/board.d/02_network
@@ -0,0 +1,27 @@
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+
+board_config_update
+
+case "$board" in
+gw,imx8mm-gw72xx-0x|\
+gw,imx8mp-gw72xx-2x|\
+gw,imx8mm-gw73xx-0x|\
+gw,imx8mp-gw73xx-2x|\
+gw,imx8mm-gw7902-0x)
+	ucidef_set_interfaces_lan_wan 'eth1' 'eth0'
+	;;
+gw,imx8mm-gw7901)
+	ucidef_set_interfaces_lan_wan 'lan2 lan3 lan4' 'lan1'
+	;;
+gateworks,imx8mp-gw74xx)
+	ucidef_set_network_device_path "eth0" "platform/soc@0/30800000.bus/30bf0000.ethernet"
+	ucidef_set_network_device_path "eth1" "platform/soc@0/30800000.bus/30be0000.ethernet"
+	ucidef_set_interfaces_lan_wan 'lan1 lan2 lan3 lan4' 'eth1'
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/imx/cortexa53/base-files/lib/preinit/79_move_config b/target/linux/imx/cortexa53/base-files/lib/preinit/79_move_config
new file mode 100644
index 0000000000..a9b9a0f458
--- /dev/null
+++ b/target/linux/imx/cortexa53/base-files/lib/preinit/79_move_config
@@ -0,0 +1,17 @@
+. /lib/functions.sh
+. /lib/upgrade/common.sh
+
+move_config() {
+	local board=$(board_name)
+	local partdev
+
+	export_bootdevice && export_partdevice partdev 1 && {
+		mount -o rw,noatime "/dev/$partdev" /mnt
+		[ -f "/mnt/$BACKUP_FILE" ] && {
+			mv -f "/mnt/$BACKUP_FILE" /
+		}
+		umount /mnt
+	}
+}
+
+boot_hook_add preinit_mount_root move_config
diff --git a/target/linux/imx/cortexa53/base-files/lib/upgrade/platform.sh b/target/linux/imx/cortexa53/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..c59a69421a
--- /dev/null
+++ b/target/linux/imx/cortexa53/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,53 @@
+
+enable_image_metadata_check() {
+	case "$(board_name)" in
+	gw,imx8m*)
+		REQUIRE_IMAGE_METADATA=1
+		;;
+	esac
+}
+enable_image_metadata_check
+
+platform_check_image() {
+	local board=$(board_name)
+
+	case "$board" in
+	gw,imx8m*)
+		return 0
+		;;
+	esac
+
+	echo "Sysupgrade is not yet supported on $board."
+	return 1
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	gw,imx8m*)
+		export_bootdevice && export_partdevice diskdev 0 || {
+			echo "Unable to find root device."
+			return 1
+		}
+		v "Updating /dev/$diskdev..."
+		get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync
+		;;
+	esac
+}
+
+platform_copy_config() {
+	local board=$(board_name)
+	local partdev
+
+	case "$board" in
+	gw,imx8m*)
+		export_partdevice partdev 1 && {
+			v "Storing $UPGRADE_BACKUP on /dev/$partdev..."
+			mount -o rw,noatime "/dev/$partdev" /mnt
+			cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+			umount /mnt
+		}
+		;;
+	esac
+}
diff --git a/target/linux/imx/cortexa53/config-default b/target/linux/imx/cortexa53/config-default
index 2076395ee8..026ddf6708 100644
--- a/target/linux/imx/cortexa53/config-default
+++ b/target/linux/imx/cortexa53/config-default
@@ -45,6 +45,7 @@ CONFIG_CMA_AREAS=7
 # CONFIG_CMA_DEBUG is not set
 # CONFIG_CMA_DEBUGFS is not set
 # CONFIG_CMA_SYSFS is not set
+# CONFIG_COMMON_CLK_BD718XX is not set
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTIG_ALLOC=y
 CONFIG_CRYPTO_AES_ARM64=y
@@ -96,9 +97,16 @@ CONFIG_INTERCONNECT_IMX8MN=y
 CONFIG_INTERCONNECT_IMX8MP=y
 CONFIG_INTERCONNECT_IMX8MQ=y
 CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_ROHM_BD718XX=y
 # CONFIG_MMC_SDHCI_PCI is not set
 CONFIG_MODULES_USE_ELF_RELA=y
 CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI is not set
+CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=y
+CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=y
+# CONFIG_NET_DSA_MICROCHIP_KSZ_SPI is not set
+CONFIG_NET_DSA_TAG_KSZ=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_PARTITION_PERCPU=y
 CONFIG_PCI=y
@@ -133,8 +141,11 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_QUEUED_RWLOCKS=y
 CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_REGULATOR_BD718XX=y
 CONFIG_REGULATOR_MP5416=y
 CONFIG_REGULATOR_PCA9450=y
+CONFIG_REGULATOR_ROHM=y
 CONFIG_RESET_IMX7=y
 CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
 CONFIG_SOC_IMX8M=y
diff --git a/target/linux/imx/image/bootscript-gateworks_venice b/target/linux/imx/image/bootscript-gateworks_venice
new file mode 100644
index 0000000000..062947f27b
--- /dev/null
+++ b/target/linux/imx/image/bootscript-gateworks_venice
@@ -0,0 +1,41 @@
+# distro-config bootscript
+#  - use only well-known variable names provided by U-Boot Distro boot
+#    - devtype - device type script run from (mmc|usb|scsi)
+#    - devnum - device number script run from (0 based int)
+#    - distro_bootpart - partition script run from (0 based int)
+#    - prefix - directory boot script was found in
+#    - kernel_addr_r - address to load kernel image to
+#    - fdt_addr_r - address to load dtb to
+#    - ftdcontroladdr - address dtb is at
+#    - fdt_file{1,2,3,4,5} name of fdt to load
+#    - fdt_overlays - list of fdt overlay files to load and apply
+echo "Gateworks Venice OpenWrt Boot script v1.0"
+
+# determine root device using PARTUUID:
+#  - this avoids any difference beteween uboot's device names/numbers
+#    not matching Linux as device enumeration is not a set API.
+#  - PARTUUID is disk UUID concatenated with partition number
+#    - for MBR disk UUID is unique disk id at offset 440
+#    - for GPT disk UUID is GPT UUID
+#  - for OpenWrt the squasfs rootfs is not readable by U-Boot so we have
+#    a 'boot' partition containing bootscript kernel dtbs followed by the rootfs
+#    partition, therefore we add 1 to the current partition
+setexpr rootpart ${distro_bootpart} + 1 # root on 'next' partition
+part uuid ${devtype} ${devnum}:${rootpart} uuid
+setenv bootargs ${bootargs} console=${console} root=PARTUUID=${uuid} rootfstype=squashfs,ext4,f2fs rootwait
+
+# load dtb (we try fdt_file and then fdt_file{1,2,3,4,5})
+echo "loading DTB..."
+setenv fdt_addr
+setenv fdt_list $fdt_file $fdt_file1 $fdt_file2 $fdt_file3 $fdt_file4 $fdt_file5
+setenv load_fdt 'echo Loading $fdt...; load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${fdt} && setenv fdt_addr ${fdt_addr_r}'
+setenv apply_overlays 'fdt addr $fdt_addr_r && fdt resize && for fdt in "$fdt_overlays"; do load ${devtype} ${devnum}:${distro_bootpart} $loadaddr $prefix/$fdt && fdt apply $loadaddr && echo applied $prefix/$fdt; done'
+for fdt in ${fdt_list}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${fdt}; then run load_fdt; fi; done
+if test -z "$fdt_addr"; then echo "Warning: Using bootloader DTB"; setenv fdt_addr $fdtcontroladdr; fi
+if test -n "$fdt_overlays"; then echo "Applying overlays"; run apply_overlays; fi
+if test -n "$fixfdt"; then echo "Adjusting FDT"; run fixfdt; fi
+
+# load and boot kernel
+echo "loading kernel..."
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} ${prefix}Image &&
+booti ${kernel_addr_r} - ${fdt_addr}
diff --git a/target/linux/imx/image/cortexa53.mk b/target/linux/imx/image/cortexa53.mk
index d8bf33407b..7458162da3 100644
--- a/target/linux/imx/image/cortexa53.mk
+++ b/target/linux/imx/image/cortexa53.mk
@@ -1,3 +1,30 @@
+define Build/boot-scr
+	rm -f $@-boot.scr
+	mkimage -A arm64 -O linux -T script -C none -a 0 -e 0 \
+		-d bootscript-$(BOOT_SCRIPT) $@-boot.scr
+endef
+
+define Build/boot-img-ext4
+	rm -fR $@.boot
+	mkdir -p $@.boot
+	$(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
+	$(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
+	-$(CP) $@-boot.scr $@.boot/boot.scr
+	make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M \
+		$(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
+		$@.bootimg $@.boot
+endef
+
+define Build/sdcard-img-ext4
+	SIGNATURE="$(IMG_PART_SIGNATURE)" \
+	PARTOFFSET="$(PARTITION_OFFSET)" PADDING=1 \
+		$(if $(filter $(1),efi),GUID="$(IMG_PART_DISKGUID)") $(SCRIPT_DIR)/gen_image_generic.sh \
+		$@ \
+		$(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
+		256
+endef
+
 define Device/Default
   PROFILES := Default
   FILESYSTEMS := squashfs ubifs ext4
@@ -13,3 +40,21 @@ define Device/imx8m
   DEVICE_DTS := $(basename $(notdir $(wildcard $(DTS_DIR)/freescale/imx8m*.dts)))
 endef
 TARGET_DEVICES += imx8m
+
+define Device/gateworks_venice
+  $(call Device/Default)
+  FILESYSTEMS := squashfs ext4
+  DEVICE_VENDOR := Gateworks
+  DEVICE_MODEL := i.MX8M Venice
+  BOOT_SCRIPT := gateworks_venice
+  PARTITION_OFFSET := 16M
+  DEVICE_DTS := $(basename $(notdir $(wildcard $(DTS_DIR)/freescale/imx8m*-venice*.dts)))
+  DEVICE_PACKAGES := \
+	kmod-hwmon-gsc kmod-rtc-ds1672 kmod-eeprom-at24 \
+	kmod-gpio-button-hotplug kmod-leds-gpio kmod-pps-gpio \
+	kmod-lan743x kmod-sky2 kmod-iio-st_accel-i2c \
+	kmod-can kmod-can-flexcan kmod-can-mcp251x
+  IMAGES := img.gz
+  IMAGE/img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+endef
+TARGET_DEVICES += gateworks_venice