From: Michael Tretter Date: Fri, 18 Oct 2019 14:11:43 +0000 (+0200) Subject: macb: propagate errors when getting optional clocks X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bd310aca442fcc72731b7acb65d32d05c956d56b;p=openwrt%2Fstaging%2Fblogic.git macb: propagate errors when getting optional clocks The tx_clk, rx_clk, and tsu_clk are optional. Currently the macb driver marks clock as not available if it receives an error when trying to get a clock. This is wrong, because a clock controller might return -EPROBE_DEFER if a clock is not available, but will eventually become available. In these cases, the driver would probe successfully but will never be able to adjust the clocks, because the clocks were not available during probe, but became available later. For example, the clock controller for the ZynqMP is implemented in the PMU firmware and the clocks are only available after the firmware driver has been probed. Use devm_clk_get_optional() in instead of devm_clk_get() to get the optional clock and propagate all errors to the calling function. Signed-off-by: Michael Tretter Acked-by: Nicolas Ferre Tested-by: Nicolas Ferre Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 8e8d557901a9..1e1b774e1953 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3405,17 +3405,17 @@ static int macb_clk_init(struct platform_device *pdev, struct clk **pclk, return err; } - *tx_clk = devm_clk_get(&pdev->dev, "tx_clk"); + *tx_clk = devm_clk_get_optional(&pdev->dev, "tx_clk"); if (IS_ERR(*tx_clk)) - *tx_clk = NULL; + return PTR_ERR(*tx_clk); - *rx_clk = devm_clk_get(&pdev->dev, "rx_clk"); + *rx_clk = devm_clk_get_optional(&pdev->dev, "rx_clk"); if (IS_ERR(*rx_clk)) - *rx_clk = NULL; + return PTR_ERR(*rx_clk); - *tsu_clk = devm_clk_get(&pdev->dev, "tsu_clk"); + *tsu_clk = devm_clk_get_optional(&pdev->dev, "tsu_clk"); if (IS_ERR(*tsu_clk)) - *tsu_clk = NULL; + return PTR_ERR(*tsu_clk); err = clk_prepare_enable(*pclk); if (err) {