From: Remi NGUYEN VAN <remi.nguyenvan+openwrt@gmail.com>
Date: Sat, 15 Aug 2020 14:03:26 +0000 (+0900)
Subject: map: rename type to maptype (FS#3287)
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bcf0704bd2ca852b1cbfa481095afb73e78287f9;p=openwrt%2Fstaging%2Fstintel.git

map: rename type to maptype (FS#3287)

"type" is already used as a common option for all protocols types, so
using the same option name for the map type makes the configuration
ambiguous. Luci in particular adds controls for both options and sees
errors when reading the resulting configuration.

Use "maptype" instead, but still fallback to "type" if "maptype" is not
set. This allows configurations to migrate without breaking old
configurations.

This addresses FS#3287.

Signed-off-by: Remi NGUYEN VAN <remi.nguyenvan+openwrt@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
---

diff --git a/package/network/ipv6/map/Makefile b/package/network/ipv6/map/Makefile
index 4bb29ee57b..f73b5eefb8 100644
--- a/package/network/ipv6/map/Makefile
+++ b/package/network/ipv6/map/Makefile
@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map
-PKG_RELEASE:=6
+PKG_RELEASE:=7
 PKG_LICENSE:=GPL-2.0
 
 include $(INCLUDE_DIR)/package.mk
diff --git a/package/network/ipv6/map/files/map.sh b/package/network/ipv6/map/files/map.sh
index 61075bd244..652c3065e3 100755
--- a/package/network/ipv6/map/files/map.sh
+++ b/package/network/ipv6/map/files/map.sh
@@ -25,27 +25,30 @@ proto_map_setup() {
 	local iface="$2"
 	local link="map-$cfg"
 
-	local type legacymap mtu ttl tunlink zone encaplimit
+	local maptype type legacymap mtu ttl tunlink zone encaplimit
 	local rule ipaddr ip4prefixlen ip6prefix ip6prefixlen peeraddr ealen psidlen psid offset
-	json_get_vars type legacymap mtu ttl tunlink zone encaplimit
+	json_get_vars maptype type legacymap mtu ttl tunlink zone encaplimit
 	json_get_vars rule ipaddr ip4prefixlen ip6prefix ip6prefixlen peeraddr ealen psidlen psid offset
 
 	[ "$zone" = "-" ] && zone=""
-	[ -z "$type" ] && type="map-e"
+
+	# Compatibility with older config: use $type if $maptype is missing
+	[ -z "$maptype" ] && maptype="$type"
+	[ -z "$maptype" ] && maptype="map-e"
 	[ -z "$ip4prefixlen" ] && ip4prefixlen=32
 
 	( proto_add_host_dependency "$cfg" "::" "$tunlink" )
 
 	# fixme: handle RA/DHCPv6 address race for LW
-	[ "$type" = lw4o6 ] && sleep 5
+	[ "$maptype" = lw4o6 ] && sleep 5
 
 	if [ -z "$rule" ]; then
-		rule="type=$type,ipv6prefix=$ip6prefix,prefix6len=$ip6prefixlen,ipv4prefix=$ipaddr,prefix4len=$ip4prefixlen"
+		rule="type=$maptype,ipv6prefix=$ip6prefix,prefix6len=$ip6prefixlen,ipv4prefix=$ipaddr,prefix4len=$ip4prefixlen"
 		[ -n "$psid" ] && rule="$rule,psid=$psid"
 		[ -n "$psidlen" ] && rule="$rule,psidlen=$psidlen"
 		[ -n "$offset" ] && rule="$rule,offset=$offset"
 		[ -n "$ealen" ] && rule="$rule,ealen=$ealen"
-		if [ "$type" = "map-t" ]; then
+		if [ "$maptype" = "map-t" ]; then
 			rule="$rule,dmr=$peeraddr"
 		else
 			rule="$rule,br=$peeraddr"
@@ -70,7 +73,7 @@ proto_map_setup() {
 	fi
 
 	k=$RULE_BMR
-	if [ "$type" = "lw4o6" -o "$type" = "map-e" ]; then
+	if [ "$maptype" = "lw4o6" -o "$maptype" = "map-e" ]; then
 		proto_init_update "$link" 1
 		proto_add_ipv4_address $(eval "echo \$RULE_${k}_IPV4ADDR") "" "" ""
 
@@ -83,7 +86,7 @@ proto_map_setup() {
 		json_add_string link $(eval "echo \$RULE_${k}_PD6IFACE")
 		json_add_object "data"
 			[ -n "$encaplimit" ] && json_add_string encaplimit "$encaplimit"
-			if [ "$type" = "map-e" ]; then
+			if [ "$maptype" = "map-e" ]; then
 				json_add_array "fmrs"
 				for i in $(seq $RULE_COUNT); do
 					[ "$(eval "echo \$RULE_${i}_FMR")" != 1 ] && continue
@@ -100,7 +103,7 @@ proto_map_setup() {
 
 
 		proto_close_tunnel
-	elif [ "$type" = "map-t" -a -f "/proc/net/nat46/control" ]; then
+	elif [ "$maptype" = "map-t" -a -f "/proc/net/nat46/control" ]; then
 		proto_init_update "$link" 1
 		local style="MAP"
 		[ "$legacymap" = 1 ] && style="MAP0"
@@ -151,7 +154,7 @@ proto_map_setup() {
               done
 	    done
 	  fi
-	  if [ "$type" = "map-t" ]; then
+	  if [ "$maptype" = "map-t" ]; then
 		[ -z "$zone" ] && zone=$(fw3 -q network $iface 2>/dev/null)
 
 		[ -n "$zone" ] && {
@@ -183,7 +186,7 @@ proto_map_setup() {
 
 	proto_send_update "$cfg"
 
-	if [ "$type" = "lw4o6" -o "$type" = "map-e" ]; then
+	if [ "$maptype" = "lw4o6" -o "$maptype" = "map-e" ]; then
 		json_init
 		json_add_string name "${cfg}_"
 		json_add_string ifname "@$(eval "echo \$RULE_${k}_PD6IFACE")"
@@ -202,9 +205,10 @@ proto_map_teardown() {
 
 	json_get_var type type
 
-	[ -z "$type" ] && type="map-e"
+	[ -z "$maptype" ] && maptype="$type"
+	[ -z "$maptype" ] && maptype="map-e"
 
-	case "$type" in
+	case "$maptype" in
 		"map-e"|"lw4o6") ifdown "${cfg}_" ;;
 		"map-t") [ -f "/proc/net/nat46/control" ] && echo del $link > /proc/net/nat46/control ;;
 	esac
@@ -216,6 +220,7 @@ proto_map_init_config() {
 	no_device=1
 	available=1
 
+	proto_config_add_string "maptype"
 	proto_config_add_string "rule"
 	proto_config_add_string "ipaddr"
 	proto_config_add_int "ip4prefixlen"