From: Kevin Schmidt Date: Fri, 2 Nov 2018 22:50:25 +0000 (+0100) Subject: lantiq: enable FXS ports on VR200v X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bce555b09b532137c447944b897f0f709560c6b1;p=openwrt%2Fstaging%2Fnbd.git lantiq: enable FXS ports on VR200v Disables SMP support. Add VR200 target to keep SMP on FXS-less device variant. Signed-off-by: Kevin Schmidt --- diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network index 7817bdd00e..86894403d7 100755 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/base-files/etc/board.d/02_network @@ -195,7 +195,7 @@ arcadyan,vg3503j) "2:lan:2" "4:lan:1" "6t@eth0" ;; -tplink,vr200v) +tplink,vr200|tplink,vr200v) wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1) ucidef_add_switch "switch0" \ "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0" diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts new file mode 100644 index 0000000000..74f666ddfd --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts @@ -0,0 +1,94 @@ +/dts-v1/; + +#include "VR200.dtsi" + +/ { + compatible = "tplink,vr200", "lantiq,xway", "lantiq,vr9"; + model = "TP-LINK Archer VR200"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &dsl; + led-internet = &internet; + led-wifi = &wlan5g; + + led-usb = &led_usb; + led-usb2 = &led_usb; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + led { + label = "led"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power: power { + label = "vr200:blue:power"; + gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "vr200:blue:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet: internet { + label = "vr200:blue:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "vr200:blue:usb"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + }; + eth { + label = "vr200:blue:lan"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + wlan { + label = "vr200:blue:wlan"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + wlan5g: wifi { + label = "vr200:blue:wlan5g"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + led_wps { + label = "vr200:blue:wps"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi new file mode 100644 index 0000000000..dcfa86125d --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi @@ -0,0 +1,219 @@ +#include "vr9.dtsi" + +#include +#include + +/ { + memory@0 { + reg = <0x0 0x7f00000>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&romfile 0xf100>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + reg = <0>; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + gphy-leds { + lantiq,groups = "gphy0 led1", "gphy1 led1"; + lantiq,function = "gphy"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; + +&spi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <33250000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0xf90000>; + label = "firmware"; + }; + + partition@fb0000 { + reg = <0xfb0000 0x10000>; + label = "radioDECT"; + read-only; + }; + + partition@fc0000 { + reg = <0xfc0000 0x10000>; + label = "config"; + read-only; + }; + + romfile: partition@fd0000 { + reg = <0xfd0000 0x10000>; + label = "romfile"; + read-only; + }; + + partition@fe0000 { + reg = <0xfe0000 0x10000>; + label = "rom"; + read-only; + }; + + partition@ff0000 { + reg = <0xff0000 0x10000>; + label = "radio"; + read-only; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts index 331f08ed50..dc65dbfc36 100644 --- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts @@ -1,32 +1,29 @@ /dts-v1/; -#include "vr9.dtsi" - -#include -#include +#include "VR200.dtsi" / { compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9"; model = "TP-LINK Archer VR200v"; chosen { - bootargs = "console=ttyLTQ0,115200"; + bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; }; aliases { led-boot = &power; led-failsafe = &power; + led-running = &power; + led-upgrade = &power; led-dsl = &dsl; led-internet = &internet; + led-wifi = &wlan5g; + led-usb = &led_usb; led-usb2 = &led_usb; }; - memory@0 { - reg = <0x0 0x7f00000>; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -63,6 +60,7 @@ power: power { label = "vr200v:blue:power"; gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; dsl: dsl { label = "vr200v:blue:dsl"; @@ -84,7 +82,7 @@ label = "vr200v:blue:wlan"; gpios = <&gpio 24 GPIO_ACTIVE_LOW>; }; - wlan5g { + wlan5g: wifi { label = "vr200v:blue:wlan5g"; gpios = <&gpio 20 GPIO_ACTIVE_LOW>; }; @@ -92,214 +90,12 @@ label = "vr200v:blue:phone"; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&romfile 0xf100>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - reg = <0>; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - mdio { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - gphy-leds { - lantiq,groups = "gphy0 led1", "gphy1 led1"; - lantiq,function = "gphy"; - lantiq,pull = <2>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - phy-rst { - lantiq,pins = "io42"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; - pins_spi_default: pins_spi_default { - spi_in { - lantiq,groups = "spi_di"; - lantiq,function = "spi"; - }; - spi_out { - lantiq,groups = "spi_do", "spi_clk", - "spi_cs4"; - lantiq,function = "spi"; - lantiq,output = <1>; - }; - }; -}; - -&pci0 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; - -&spi { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pins_spi_default>; - - m25p80@4 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <4 0>; - spi-max-frequency = <33250000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x20000>; - label = "u-boot"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0xf90000>; - label = "firmware"; - }; - - partition@fb0000 { - reg = <0xfb0000 0x10000>; - label = "radioDECT"; - read-only; - }; - - partition@fc0000 { - reg = <0xfc0000 0x10000>; - label = "config"; - read-only; - }; - - romfile: partition@fd0000 { - reg = <0xfd0000 0x10000>; - label = "romfile"; - read-only; - }; - - partition@fe0000 { - reg = <0xfe0000 0x10000>; - label = "rom"; - read-only; - }; - - partition@ff0000 { - reg = <0xff0000 0x10000>; - label = "radio"; - read-only; - }; - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; + }; }; -&usb1 { +&vmmc { status = "okay"; - vbus-supply = <&usb_vbus>; + gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay + &gpio 31 GPIO_ACTIVE_HIGH //still unknown + &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? }; diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link.mk index e2dfc08fe5..bec9eafbd1 100644 --- a/target/linux/lantiq/image/tp-link.mk +++ b/target/linux/lantiq/image/tp-link.mk @@ -37,16 +37,28 @@ define Device/tplink_tdw8980 endef TARGET_DEVICES += tplink_tdw8980 +define Device/tplink_vr200 + $(Device/lantiqTpLink) + DEVICE_DTS := VR200 + TPLINK_FLASHLAYOUT := 16Mltq + TPLINK_HWID := 0x63e64801 + TPLINK_HWREV := 0x53 + IMAGE_SIZE := 15808k + DEVICE_TITLE := TP-LINK Archer VR200 + DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport + SUPPORTED_DEVICES += VR200 +endef +TARGET_DEVICES += tplink_vr200 + define Device/tplink_vr200v $(Device/lantiqTpLink) DEVICE_DTS := VR200v - TPLINK_BOARD_ID := ArcherVR200V TPLINK_FLASHLAYOUT := 16Mltq TPLINK_HWID := 0x73b70801 TPLINK_HWREV := 0x2f IMAGE_SIZE := 15808k DEVICE_TITLE := TP-LINK Archer VR200v - DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport + DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-ltq-tapi kmod-ltq-vmmc SUPPORTED_DEVICES += VR200v endef TARGET_DEVICES += tplink_vr200v