From: Álvaro Fernández Rojas Date: Sun, 11 Jun 2023 16:44:36 +0000 (+0200) Subject: bmips: add support for Comtrend AR-5381u X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bcdf861519b8fddad1abc5d87c434252815a3a6d;p=openwrt%2Fstaging%2Fnbd.git bmips: add support for Comtrend AR-5381u The Comtrend AR-5381u is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB DDR - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43225 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network index 792926fcf2..c9c704067e 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network @@ -5,6 +5,7 @@ board_config_update case "$(board_name)" in +comtrend,ar-5381u |\ comtrend,ar-5387un) ucidef_set_bridge_device switch ucidef_set_interface_lan "lan1 lan2 lan3 lan4" diff --git a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc index 3909947be6..21f18b4b81 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc +++ b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc @@ -3,6 +3,7 @@ . /lib/functions.sh case "$(board_name)" in +comtrend,ar-5381u |\ comtrend,ar-5387un) mtd fixtrx firmware ;; diff --git a/target/linux/bmips/dts/bcm6328-comtrend-ar-5381u.dts b/target/linux/bmips/dts/bcm6328-comtrend-ar-5381u.dts new file mode 100644 index 0000000000..7499e7090f --- /dev/null +++ b/target/linux/bmips/dts/bcm6328-comtrend-ar-5381u.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "bcm6328.dtsi" + +/ { + model = "Comtrend AR-5381u"; + compatible = "comtrend,ar-5381u", "brcm,bcm6328"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_alarm_red; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; + + bcm43225-sprom { + compatible = "brcm,bcma-sprom"; + + pci-bus = <1>; + pci-dev = <0>; + + nvmem-cells = <&macaddr_cfe_6a0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + + brcm,sprom = "brcm/bcm43225-sprom.bin"; + brcm,sprom-fixups = <97 0xfee5>, + <98 0x157c>, + <99 0xfae7>, + <113 0xfefa>, + <114 0x15d6>, + <115 0xfaf8>; + }; +}; + +&ehci { + status = "okay"; +}; + +ðernet { + status = "okay"; + + nvmem-cells = <&macaddr_cfe_6a0>; + nvmem-cell-names = "mac-address"; +}; + +&hsspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <16666667>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + cfe: partition@0 { + reg = <0x000000 0x010000>; + label = "cfe"; + read-only; + }; + + partition@10000 { + compatible = "brcm,bcm963xx-imagetag"; + reg = <0x010000 0xfe0000>; + label = "firmware"; + }; + + partition@ff0000 { + reg = <0xff0000 0x010000>; + label = "nvram"; + }; + }; + }; +}; + +&leds { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led_alarm_red: led@2 { + reg = <2>; + active-low; + label = "red:alarm"; + panic-indicator; + }; + + led@3 { + reg = <3>; + active-low; + label = "green:internet"; + }; + + led_power_green: led@4 { + reg = <4>; + active-low; + label = "green:power"; + }; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pinctrl { + pinctrl_leds: leds { + function = "led"; + pins = "gpio2", "gpio3", "gpio4"; + }; +}; + +&switch0 { + ports { + port@0 { + reg = <0>; + label = "lan1"; + + phy-handle = <&phy1>; + phy-mode = "mii"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + + phy-handle = <&phy2>; + phy-mode = "mii"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + + phy-handle = <&phy3>; + phy-mode = "mii"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + + phy-handle = <&phy4>; + phy-mode = "mii"; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usbh { + status = "okay"; +}; + +&cfe { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_cfe_6a0: macaddr@6a0 { + reg = <0x6a0 0x6>; + }; +}; diff --git a/target/linux/bmips/image/bcm6328.mk b/target/linux/bmips/image/bcm6328.mk index b3cef51a71..dfa134df94 100644 --- a/target/linux/bmips/image/bcm6328.mk +++ b/target/linux/bmips/image/bcm6328.mk @@ -1,5 +1,18 @@ # SPDX-License-Identifier: GPL-2.0-or-later +define Device/comtrend_ar-5381u + $(Device/bcm63xx-cfe) + DEVICE_VENDOR := Comtrend + DEVICE_MODEL := AR-5381u + CHIP_ID := 6328 + CFE_BOARD_ID := 96328A-1241N + FLASH_MB := 16 + DEVICE_PACKAGES += $(USB2_PACKAGES) \ + $(B43_PACKAGES) broadcom-43225-sprom \ + kmod-leds-bcm6328 +endef +TARGET_DEVICES += comtrend_ar-5381u + define Device/comtrend_ar-5387un $(Device/bcm63xx-cfe) DEVICE_VENDOR := Comtrend