From: Daniel Golle Date: Fri, 26 Jan 2024 17:26:39 +0000 (+0000) Subject: uboot-mediatek: add builds for BananaPi BPi-R3 mini X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bc25519f98cddbea3332e8ad02aac45aeea87fd6;p=openwrt%2Fstaging%2Fnbd.git uboot-mediatek: add builds for BananaPi BPi-R3 mini The R3 mini comes with two Airoha EN8811H PHYs for 2.5G Ethernet. The driver added to U-Boot expects the firmware for the PHY to be stored inside UBI volume en8811h-fw or MMC boot1 hardware partition. Signed-off-by: Daniel Golle --- diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index df8c9431ec..61aaf4de25 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -416,6 +416,30 @@ define U-Boot/mt7986_bananapi_bpi-r3-nor FIP_COMPRESS:=1 endef +define U-Boot/mt7986_bananapi_bpi-r3-mini-emmc + NAME:=BananaPi BPi-R3 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=bananapi_bpi-r3-mini + UBOOT_CONFIG:=mt7986a_bpi-r3-mini-emmc + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=emmc + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4 +endef + +define U-Boot/mt7986_bananapi_bpi-r3-mini-snand + NAME:=BananaPi BPi-R3 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=bananapi_bpi-r3-mini + UBOOT_CONFIG:=mt7986a_bpi-r3-mini-snand + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand-ubi + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ubi-ddr4 +endef + define U-Boot/mt7986_glinet_gl-mt6000 NAME:=GL.iNet GL-MT6000 BUILD_SUBTARGET:=filogic @@ -632,6 +656,8 @@ UBOOT_TARGETS := \ mt7986_bananapi_bpi-r3-sdmmc \ mt7986_bananapi_bpi-r3-snand \ mt7986_bananapi_bpi-r3-nor \ + mt7986_bananapi_bpi-r3-mini-emmc \ + mt7986_bananapi_bpi-r3-mini-snand \ mt7986_glinet_gl-mt6000 \ mt7986_jdcloud_re-cp-03 \ mt7986_tplink_tl-xdr4288 \ diff --git a/package/boot/uboot-mediatek/patches/160-net-phy-add-support-for-Airoha-ethernet-PHY-driver.patch b/package/boot/uboot-mediatek/patches/160-net-phy-add-support-for-Airoha-ethernet-PHY-driver.patch new file mode 100644 index 0000000000..f8e8659952 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/160-net-phy-add-support-for-Airoha-ethernet-PHY-driver.patch @@ -0,0 +1,1929 @@ +From 70157a6148ad47734f1dc646b4157ca83cc5df9f Mon Sep 17 00:00:00 2001 +From: Weijie Gao +Date: Thu, 13 Jul 2023 16:34:48 +0800 +Subject: [PATCH] net: phy: add support for Airoha ethernet PHY driver + +This patch adds support for Airoha ethernet PHY driver. + +If GMAC2 of your board connects to Airoha EN8801S, please change the eth +node as follow: + +ð { + status = "okay"; + mediatek,gmac-id = <1>; + mediatek,sgmiisys = <&sgmiisys1>; + phy-mode = "sgmii"; + phy-handle = <&phy5>; + + phy5: eth-phy@5 { + reg = <24>; + }; +}; + +If GMAC2 of your board connects to Airoha EN8811H, please change the eth +node as follow: + +ð { + status = "okay"; + mediatek,gmac-id = <1>; + mediatek,sgmiisys = <&sgmiisys1>; + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + + fixed-link { + speed = <2500>; + full-duplex; + }; + + phy5: eth-phy@5 { + reg = <15>; + }; +}; + +Signed-off-by: Weijie Gao +--- + .../drivers/net/phy/Kconfig | 15 + + .../drivers/net/phy/Makefile | 2 + + .../drivers/net/phy/air_en8801s.c | 633 ++ + .../drivers/net/phy/air_en8801s.h | 267 + + .../drivers/net/phy/air_en8811h.c | 649 ++ + .../drivers/net/phy/air_en8811h.h | 160 + + .../drivers/net/phy/air_en8811h_fw.h | 9227 +++++++++++++++++ + 7 files changed, 10953 insertions(+) + create mode 100644 drivers/net/phy/air_en8801s.c + create mode 100644 drivers/net/phy/air_en8801s.h + create mode 100644 drivers/net/phy/air_en8811h.c + create mode 100644 drivers/net/phy/air_en8811h.h + create mode 100644 drivers/net/phy/air_en8811h_fw.h + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -77,6 +77,37 @@ config PHY_ADIN + help + Add support for configuring RGMII on Analog Devices ADIN PHYs. + ++menuconfig PHY_AIROHA ++ bool "Airoha Ethernet PHYs support" ++ ++config PHY_AIROHA_EN8801S ++ bool "Airoha Ethernet EN8801S support" ++ depends on PHY_AIROHA ++ help ++ AIROHA EN8801S supported. ++ ++config PHY_AIROHA_EN8811H ++ bool "Airoha Ethernet EN8811H support" ++ depends on PHY_AIROHA ++ help ++ AIROHA EN8811H supported. ++ ++choice ++ prompt "Location of the Airoha PHY firmware" ++ default PHY_AIROHA_FW_IN_UBI ++ depends on PHY_AIROHA_EN8811H ++ ++config PHY_AIROHA_FW_IN_MMC ++ bool "Airoha firmware in MMC boot1 partition" ++ ++config PHY_AIROHA_FW_IN_UBI ++ bool "Airoha firmware in UBI volume en8811h-fw on NAND flash" ++ ++config PHY_AIROHA_FW_IN_MTD ++ bool "Airoha firmware in MTD partition on raw flash" ++ ++endchoice ++ + menuconfig PHY_AQUANTIA + bool "Aquantia Ethernet PHYs support" + select PHY_GIGE +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -11,6 +11,8 @@ obj-$(CONFIG_MV88E6352_SWITCH) += mv88e6 + obj-$(CONFIG_PHYLIB) += phy.o + obj-$(CONFIG_PHYLIB_10G) += generic_10g.o + obj-$(CONFIG_PHY_ADIN) += adin.o ++obj-$(CONFIG_PHY_AIROHA_EN8801S) += air_en8801s.o ++obj-$(CONFIG_PHY_AIROHA_EN8811H) += air_en8811h.o + obj-$(CONFIG_PHY_AQUANTIA) += aquantia.o + obj-$(CONFIG_PHY_ATHEROS) += atheros.o + obj-$(CONFIG_PHY_BROADCOM) += broadcom.o +--- /dev/null ++++ b/drivers/net/phy/air_en8801s.c +@@ -0,0 +1,633 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/************************************************* ++ * FILE NAME: air_en8801s.c ++ * PURPOSE: ++ * EN8801S PHY Driver for Uboot ++ * NOTES: ++ * ++ * Copyright (C) 2023 Airoha Technology Corp. ++ *************************************************/ ++ ++/* INCLUDE FILE DECLARATIONS ++ */ ++#include ++#include ++#include ++#include ++#include "air_en8801s.h" ++ ++#if AIR_UBOOT_REVISION > 0x202004 ++#include ++#endif ++ ++static struct phy_device *s_phydev = 0; ++/****************************************************** ++ * The following led_cfg example is for reference only. ++ * LED5 1000M/LINK/ACT (GPIO5) <-> BASE_T_LED0, ++ * LED6 10/100M/LINK/ACT (GPIO9) <-> BASE_T_LED1, ++ * LED4 100M/LINK/ACT (GPIO8) <-> BASE_T_LED2, ++ ******************************************************/ ++/* User-defined.B */ ++#define AIR_LED_SUPPORT ++#ifdef AIR_LED_SUPPORT ++static const AIR_BASE_T_LED_CFG_T led_cfg[4] = ++{ ++ /* ++ * LED Enable, GPIO, LED Polarity, LED ON, LED Blink ++ */ ++ {LED_ENABLE, 5, AIR_ACTIVE_LOW, BASE_T_LED0_ON_CFG, BASE_T_LED0_BLK_CFG}, /* BASE-T LED0 */ ++ {LED_ENABLE, 9, AIR_ACTIVE_LOW, BASE_T_LED1_ON_CFG, BASE_T_LED1_BLK_CFG}, /* BASE-T LED1 */ ++ {LED_ENABLE, 8, AIR_ACTIVE_LOW, BASE_T_LED2_ON_CFG, BASE_T_LED2_BLK_CFG}, /* BASE-T LED2 */ ++ {LED_DISABLE, 1, AIR_ACTIVE_LOW, BASE_T_LED3_ON_CFG, BASE_T_LED3_BLK_CFG} /* BASE-T LED3 */ ++}; ++static const u16 led_dur = UNIT_LED_BLINK_DURATION << AIR_LED_BLK_DUR_64M; ++#endif ++/* User-defined.E */ ++/************************************************************************ ++ * F U N C T I O N S ++ ************************************************************************/ ++/* Airoha MII read function */ ++static int airoha_cl22_read(struct mii_dev *bus, int phy_addr, int phy_register) ++{ ++ int read_data = bus->read(bus, phy_addr, MDIO_DEVAD_NONE, phy_register); ++ ++ if (read_data < 0) ++ return -EIO; ++ return read_data; ++} ++ ++/* Airoha MII write function */ ++static int airoha_cl22_write(struct mii_dev *bus, int phy_addr, int phy_register, int write_data) ++{ ++ int ret = bus->write(bus, phy_addr, MDIO_DEVAD_NONE, phy_register, write_data); ++ ++ return ret; ++} ++ ++static int airoha_cl45_write(struct phy_device *phydev, int devad, int reg, int val) ++{ ++ int ret = 0; ++ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, devad); ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, reg); ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad); ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, val); ++ AIR_RTN_ERR(ret); ++ return ret; ++} ++ ++static int airoha_cl45_read(struct phy_device *phydev, int devad, int reg) ++{ ++ int read_data, ret; ++ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, devad); ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, reg); ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad); ++ AIR_RTN_ERR(ret); ++ read_data = phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG); ++ if (read_data < 0) ++ return -EIO; ++ return read_data; ++} ++ ++/* EN8801 PBUS write function */ ++int airoha_pbus_write(struct mii_dev *bus, int pbus_addr, int pbus_reg, unsigned long pbus_data) ++{ ++ int ret = 0; ++ ++ ret = airoha_cl22_write(bus, pbus_addr, 0x1F, (pbus_reg >> 6)); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl22_write(bus, pbus_addr, ((pbus_reg >> 2) & 0xf), (pbus_data & 0xFFFF)); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl22_write(bus, pbus_addr, 0x10, (pbus_data >> 16)); ++ AIR_RTN_ERR(ret); ++ return ret; ++} ++ ++/* EN8801 PBUS read function */ ++unsigned long airoha_pbus_read(struct mii_dev *bus, int pbus_addr, int pbus_reg) ++{ ++ unsigned long pbus_data; ++ unsigned int pbus_data_low, pbus_data_high; ++ ++ airoha_cl22_write(bus, pbus_addr, 0x1F, (pbus_reg >> 6)); ++ pbus_data_low = airoha_cl22_read(bus, pbus_addr, ((pbus_reg >> 2) & 0xf)); ++ pbus_data_high = airoha_cl22_read(bus, pbus_addr, 0x10); ++ pbus_data = (pbus_data_high << 16) + pbus_data_low; ++ return pbus_data; ++} ++ ++/* Airoha Token Ring Write function */ ++static int airoha_tr_reg_write(struct phy_device *phydev, unsigned long tr_address, unsigned long tr_data) ++{ ++ int ret; ++ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, 0x52b5); /* page select */ ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x11, (int)(tr_data & 0xffff)); ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x12, (int)(tr_data >> 16)); ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x10, (int)(tr_address | TrReg_WR)); ++ AIR_RTN_ERR(ret); ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, 0x0); /* page resetore */ ++ AIR_RTN_ERR(ret); ++ return ret; ++} ++ ++int airoha_phy_process(void) ++{ ++ int ret = 0, pbus_addr = EN8801S_PBUS_PHY_ID; ++ unsigned long pbus_data; ++ struct mii_dev *mbus; ++ ++ mbus = s_phydev->bus; ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x19e0); ++ pbus_data |= BIT(0); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x19e0, pbus_data); ++ if(ret) ++ printf("error: airoha_pbus_write fail ret: %d\n", ret); ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x19e0); ++ pbus_data &= ~BIT(0); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x19e0, pbus_data); ++ if(ret) ++ printf("error: airoha_pbus_write fail ret: %d\n", ret); ++ ++ if(ret) ++ printf("error: FCM regs reset fail, ret: %d\n", ret); ++ else ++ debug("FCM regs reset successful\n"); ++ return ret; ++} ++ ++#ifdef AIR_LED_SUPPORT ++static int airoha_led_set_usr_def(struct phy_device *phydev, u8 entity, int polar, ++ u16 on_evt, u16 blk_evt) ++{ ++ int ret = 0; ++ ++ if (AIR_ACTIVE_HIGH == polar) { ++ on_evt |= LED_ON_POL; ++ } else { ++ on_evt &= ~LED_ON_POL; ++ } ++ ret = airoha_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), on_evt | LED_ON_EN); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1f, LED_BLK_CTRL(entity), blk_evt); ++ AIR_RTN_ERR(ret); ++ return 0; ++} ++ ++static int airoha_led_set_mode(struct phy_device *phydev, u8 mode) ++{ ++ u16 cl45_data; ++ int err = 0; ++ ++ cl45_data = airoha_cl45_read(phydev, 0x1f, LED_BCR); ++ switch (mode) { ++ case AIR_LED_MODE_DISABLE: ++ cl45_data &= ~LED_BCR_EXT_CTRL; ++ cl45_data &= ~LED_BCR_MODE_MASK; ++ cl45_data |= LED_BCR_MODE_DISABLE; ++ break; ++ case AIR_LED_MODE_USER_DEFINE: ++ cl45_data |= LED_BCR_EXT_CTRL; ++ cl45_data |= LED_BCR_CLK_EN; ++ break; ++ default: ++ printf("LED mode%d is not supported!\n", mode); ++ return -EINVAL; ++ } ++ err = airoha_cl45_write(phydev, 0x1f, LED_BCR, cl45_data); ++ AIR_RTN_ERR(err); ++ return 0; ++} ++ ++static int airoha_led_set_state(struct phy_device *phydev, u8 entity, u8 state) ++{ ++ u16 cl45_data; ++ int err; ++ ++ cl45_data = airoha_cl45_read(phydev, 0x1f, LED_ON_CTRL(entity)); ++ if (LED_ENABLE == state) { ++ cl45_data |= LED_ON_EN; ++ } else { ++ cl45_data &= ~LED_ON_EN; ++ } ++ ++ err = airoha_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), cl45_data); ++ AIR_RTN_ERR(err); ++ return 0; ++} ++ ++static int en8801s_led_init(struct phy_device *phydev) ++{ ++ ++ unsigned long led_gpio = 0, reg_value = 0; ++ int ret = 0, led_id; ++ struct mii_dev *mbus = phydev->bus; ++ int gpio_led_rg[3] = {0x1870, 0x1874, 0x1878}; ++ u16 cl45_data = led_dur; ++ ++ ret = airoha_cl45_write(phydev, 0x1f, LED_BLK_DUR, cl45_data); ++ AIR_RTN_ERR(ret); ++ cl45_data >>= 1; ++ ret = airoha_cl45_write(phydev, 0x1f, LED_ON_DUR, cl45_data); ++ AIR_RTN_ERR(ret); ++ ret = airoha_led_set_mode(phydev, AIR_LED_MODE_USER_DEFINE); ++ if (ret != 0) { ++ printf("LED fail to set mode, ret %d !\n", ret); ++ return ret; ++ } ++ for(led_id = 0; led_id < EN8801S_LED_COUNT; led_id++) { ++ reg_value = 0; ++ ret = airoha_led_set_state(phydev, led_id, led_cfg[led_id].en); ++ if (ret != 0) { ++ printf("LED fail to set state, ret %d !\n", ret); ++ return ret; ++ } ++ if (LED_ENABLE == led_cfg[led_id].en) { ++ if ( (led_cfg[led_id].gpio < 0) || led_cfg[led_id].gpio > 9) { ++ printf("GPIO%d is out of range!! GPIO number is 0~9.\n", led_cfg[led_id].gpio); ++ return -EIO; ++ } ++ led_gpio |= BIT(led_cfg[led_id].gpio); ++ reg_value = airoha_pbus_read(mbus, EN8801S_PBUS_PHY_ID, gpio_led_rg[led_cfg[led_id].gpio / 4]); ++ LED_SET_GPIO_SEL(led_cfg[led_id].gpio, led_id, reg_value); ++ debug("[Airoha] gpio%d, reg_value 0x%lx\n", led_cfg[led_id].gpio, reg_value); ++ ret = airoha_pbus_write(mbus, EN8801S_PBUS_PHY_ID, gpio_led_rg[led_cfg[led_id].gpio / 4], reg_value); ++ AIR_RTN_ERR(ret); ++ ret = airoha_led_set_usr_def(phydev, led_id, led_cfg[led_id].pol, led_cfg[led_id].on_cfg, led_cfg[led_id].blk_cfg); ++ if (ret != 0) { ++ printf("LED fail to set usr def, ret %d !\n", ret); ++ return ret; ++ } ++ } ++ } ++ reg_value = (airoha_pbus_read(mbus, EN8801S_PBUS_PHY_ID, 0x1880) & ~led_gpio); ++ ret = airoha_pbus_write(mbus, EN8801S_PBUS_PHY_ID, 0x1880, reg_value); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, EN8801S_PBUS_PHY_ID, 0x186c, led_gpio); ++ AIR_RTN_ERR(ret); ++ ++ printf("LED initialize OK !\n"); ++ return 0; ++} ++#endif /* AIR_LED_SUPPORT */ ++ ++static int en8801s_config(struct phy_device *phydev) ++{ ++ int reg_value = 0, ret = 0; ++ struct mii_dev *mbus = phydev->bus; ++ int retry, pbus_addr = EN8801S_PBUS_DEFAULT_ID; ++ int phy_addr = EN8801S_MDIO_PHY_ID; ++ unsigned long pbus_data = 0; ++ gephy_all_REG_LpiReg1Ch GPHY_RG_LPI_1C; ++ gephy_all_REG_dev1Eh_reg324h GPHY_RG_1E_324; ++ gephy_all_REG_dev1Eh_reg012h GPHY_RG_1E_012; ++ gephy_all_REG_dev1Eh_reg017h GPHY_RG_1E_017; ++ ++ s_phydev = phydev; ++ retry = MAX_OUI_CHECK; ++ while (1) { ++ /* PHY OUI */ ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, EN8801S_RG_ETHER_PHY_OUI); ++ if (EN8801S_PBUS_OUI == pbus_data) { ++ printf("PBUS addr 0x%x: Start initialized.\n", pbus_addr); ++ ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_BUCK_CTL, 0x03); ++ AIR_RTN_ERR(ret); ++ break; ++ } else ++ pbus_addr = EN8801S_PBUS_PHY_ID; ++ ++ if (0 == --retry) { ++ printf("EN8801S Probe fail !\n"); ++ return 0; ++ } ++ } ++ ++ /* SMI ADDR */ ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, EN8801S_RG_SMI_ADDR); ++ pbus_data = (pbus_data & 0xffff0000) | (unsigned long)(pbus_addr << 8) | (unsigned long)(EN8801S_MDIO_DEFAULT_ID); ++ ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_SMI_ADDR, pbus_data); ++ AIR_RTN_ERR(ret); ++ mdelay(10); ++ ++ pbus_data = (airoha_pbus_read(mbus, pbus_addr, EN8801S_RG_LTR_CTL) & (~0x3)) | BIT(2) ; ++ ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_LTR_CTL, pbus_data); ++ AIR_RTN_ERR(ret); ++ mdelay(500); ++ pbus_data = (pbus_data & ~BIT(2)) | EN8801S_RX_POLARITY_NORMAL | EN8801S_TX_POLARITY_NORMAL; ++ ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_LTR_CTL, pbus_data); ++ AIR_RTN_ERR(ret); ++ mdelay(500); ++ /* SMI ADDR */ ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, EN8801S_RG_SMI_ADDR); ++ pbus_data = (pbus_data & 0xffff0000) | (unsigned long)(EN8801S_PBUS_PHY_ID << 8) | (unsigned long)(EN8801S_MDIO_PHY_ID); ++ ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_SMI_ADDR, pbus_data); ++ pbus_addr = EN8801S_PBUS_PHY_ID; ++ AIR_RTN_ERR(ret); ++ mdelay(10); ++ ++ /* Optimze 10M IoT */ ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1690); ++ pbus_data |= (1 << 31); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1690, pbus_data); ++ AIR_RTN_ERR(ret); ++ /* set SGMII Base Page */ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c000c00); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x10, 0xD801); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0, 0x9140); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0A14, 0x0003); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c000c00); ++ AIR_RTN_ERR(ret); ++ /* Set FCM control */ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1404, 0x004b); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x140c, 0x0007); ++ AIR_RTN_ERR(ret); ++ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x142c, 0x05050505); ++ AIR_RTN_ERR(ret); ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1440); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1440, pbus_data & ~BIT(11)); ++ AIR_RTN_ERR(ret); ++ ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1408); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1408, pbus_data | BIT(5)); ++ AIR_RTN_ERR(ret); ++ ++ /* Set GPHY Perfomance*/ ++ /* Token Ring */ ++ ret = airoha_tr_reg_write(phydev, RgAddr_R1000DEC_15h, 0x0055A0); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_R1000DEC_17h, 0x07FF3F); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_PMA_00h, 0x00001E); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_PMA_01h, 0x6FB90A); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_PMA_17h, 0x060671); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_PMA_18h, 0x0E2F00); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_TR_26h, 0x444444); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_03h, 0x000000); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_06h, 0x2EBAEF); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_08h, 0x00000B); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_0Ch, 0x00504D); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_0Dh, 0x02314F); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_0Fh, 0x003028); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_10h, 0x005010); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_11h, 0x040001); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_13h, 0x018670); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_14h, 0x00024A); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_1Bh, 0x000072); ++ AIR_RTN_ERR(ret); ++ ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_1Ch, 0x003210); ++ AIR_RTN_ERR(ret); ++ /* CL22 & CL45 */ ++ ret = airoha_cl22_write(mbus, phy_addr, 0x1f, 0x03); ++ AIR_RTN_ERR(ret); ++ GPHY_RG_LPI_1C.DATA = airoha_cl22_read(mbus, phy_addr, RgAddr_LPI_1Ch); ++ if (GPHY_RG_LPI_1C.DATA < 0) ++ return -EIO; ++ GPHY_RG_LPI_1C.DataBitField.smi_deton_th = 0x0C; ++ ret = airoha_cl22_write(mbus, phy_addr, RgAddr_LPI_1Ch, GPHY_RG_LPI_1C.DATA); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl22_write(mbus, phy_addr, RgAddr_LPI_1Ch, 0xC92); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl22_write(mbus, phy_addr, RgAddr_AUXILIARY_1Dh, 0x1); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl22_write(mbus, phy_addr, 0x1f, 0x0); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x120, 0x8014); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x122, 0xffff); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x123, 0xffff); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x144, 0x0200); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x14A, 0xEE20); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x189, 0x0110); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x19B, 0x0111); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x234, 0x0181); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x238, 0x0120); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x239, 0x0117); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x268, 0x07F4); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x2D1, 0x0733); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x323, 0x0011); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x324, 0x013F); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x326, 0x0037); ++ AIR_RTN_ERR(ret); ++ ++ reg_value = airoha_cl45_read(phydev, 0x1E, 0x324); ++ if (reg_value < 0) ++ return -EIO; ++ GPHY_RG_1E_324.DATA = (int)reg_value; ++ GPHY_RG_1E_324.DataBitField.smi_det_deglitch_off = 0; ++ ret = airoha_cl45_write(phydev, 0x1E, 0x324, GPHY_RG_1E_324.DATA); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x19E, 0xC2); ++ AIR_RTN_ERR(ret); ++ ret = airoha_cl45_write(phydev, 0x1E, 0x013, 0x0); ++ AIR_RTN_ERR(ret); ++ ++ /* EFUSE */ ++ airoha_pbus_write(mbus, pbus_addr, 0x1C08, 0x40000040); ++ retry = MAX_RETRY; ++ while (0 != retry) { ++ mdelay(1); ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1C08); ++ if ((pbus_data & (1 << 30)) == 0) { ++ break; ++ } ++ retry--; ++ } ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1C38); /* RAW#2 */ ++ reg_value = airoha_cl45_read(phydev, 0x1E, 0x12); ++ if (reg_value < 0) ++ return -EIO; ++ GPHY_RG_1E_012.DATA = reg_value; ++ GPHY_RG_1E_012.DataBitField.da_tx_i2mpb_a_tbt = pbus_data & 0x03f; ++ ret = airoha_cl45_write(phydev, 0x1E, 0x12, GPHY_RG_1E_012.DATA); ++ AIR_RTN_ERR(ret); ++ reg_value = airoha_cl45_read(phydev, 0x1E, 0x17); ++ if (reg_value < 0) ++ return -EIO; ++ GPHY_RG_1E_017.DataBitField.da_tx_i2mpb_b_tbt = (reg_value >> 8) & 0x03f; ++ ret = airoha_cl45_write(phydev, 0x1E, 0x17, GPHY_RG_1E_017.DATA); ++ AIR_RTN_ERR(ret); ++ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1C08, 0x40400040); ++ AIR_RTN_ERR(ret); ++ retry = MAX_RETRY; ++ while (0 != retry) { ++ mdelay(1); ++ reg_value = airoha_pbus_read(mbus, pbus_addr, 0x1C08); ++ if ((reg_value & (1 << 30)) == 0) { ++ break; ++ } ++ retry--; ++ } ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1C30); /* RAW#16 */ ++ GPHY_RG_1E_324.DataBitField.smi_det_deglitch_off = (pbus_data >> 12) & 0x01; ++ ret = airoha_cl45_write(phydev, 0x1E, 0x324, GPHY_RG_1E_324.DATA); ++ AIR_RTN_ERR(ret); ++#ifdef AIR_LED_SUPPORT ++ ret = en8801s_led_init(phydev); ++ if (ret != 0){ ++ printf("en8801s_led_init fail (ret:%d) !\n", ret); ++ } ++#endif ++ printf("EN8801S initialize OK ! (%s)\n", EN8801S_DRIVER_VERSION); ++ return 0; ++} ++ ++int en8801s_read_status(struct phy_device *phydev) ++{ ++ int ret, pbus_addr = EN8801S_PBUS_PHY_ID; ++ struct mii_dev *mbus; ++ unsigned long pbus_data; ++ ++ mbus = phydev->bus; ++ if (SPEED_10 == phydev->speed) { ++ /* set the bit for Optimze 10M IoT */ ++ debug("[Airoha] SPEED_10 0x1694\n"); ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1694); ++ pbus_data |= (1 << 31); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1694, pbus_data); ++ AIR_RTN_ERR(ret); ++ } else { ++ debug("[Airoha] SPEED_1000/100 0x1694\n"); ++ /* clear the bit for other speeds */ ++ pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1694); ++ pbus_data &= ~(1 << 31); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1694, pbus_data); ++ AIR_RTN_ERR(ret); ++ } ++ ++ airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c000c00); ++ if(SPEED_1000 == phydev->speed) { ++ debug("[Airoha] SPEED_1000\n"); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x10, 0xD801); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0, 0x9140); ++ AIR_RTN_ERR(ret); ++ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0A14, 0x0003); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c000c00); ++ AIR_RTN_ERR(ret); ++ mdelay(2); /* delay 2 ms */ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1404, 0x004b); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x140c, 0x0007); ++ AIR_RTN_ERR(ret); ++ } ++ else if (SPEED_100 == phydev->speed) { ++ debug("[Airoha] SPEED_100\n"); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x10, 0xD401); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0, 0x9140); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0A14, 0x0007); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c11); ++ AIR_RTN_ERR(ret); ++ mdelay(2); /* delay 2 ms */ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1404, 0x0027); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x140c, 0x0007); ++ AIR_RTN_ERR(ret); ++ } ++ else { ++ debug("[Airoha] SPEED_10\n"); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x10, 0xD001); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0, 0x9140); ++ AIR_RTN_ERR(ret); ++ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0A14, 0x000b); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c11); ++ AIR_RTN_ERR(ret); ++ mdelay(2); /* delay 2 ms */ ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x1404, 0x0047); ++ AIR_RTN_ERR(ret); ++ ret = airoha_pbus_write(mbus, pbus_addr, 0x140c, 0x0007); ++ AIR_RTN_ERR(ret); ++ } ++ return 0; ++} ++ ++static int en8801s_startup(struct phy_device *phydev) ++{ ++ int ret; ++ ++ ret = genphy_update_link(phydev); ++ if (ret) ++ return ret; ++ ret = genphy_parse_link(phydev); ++ if (ret) ++ return ret; ++ return en8801s_read_status(phydev); ++} ++#if AIR_UBOOT_REVISION > 0x202303 ++U_BOOT_PHY_DRIVER(en8801s) = { ++ .name = "Airoha EN8801S", ++ .uid = EN8801S_PHY_ID, ++ .mask = 0x0ffffff0, ++ .features = PHY_GBIT_FEATURES, ++ .config = &en8801s_config, ++ .startup = &en8801s_startup, ++ .shutdown = &genphy_shutdown, ++}; ++#else ++static struct phy_driver AIR_EN8801S_driver = { ++ .name = "Airoha EN8801S", ++ .uid = EN8801S_PHY_ID, ++ .mask = 0x0ffffff0, ++ .features = PHY_GBIT_FEATURES, ++ .config = &en8801s_config, ++ .startup = &en8801s_startup, ++ .shutdown = &genphy_shutdown, ++}; ++ ++int phy_air_en8801s_init(void) ++{ ++ phy_register(&AIR_EN8801S_driver); ++ return 0; ++} ++#endif +--- /dev/null ++++ b/drivers/net/phy/air_en8801s.h +@@ -0,0 +1,267 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/************************************************* ++ * FILE NAME: air_en8801s.h ++ * PURPOSE: ++ * EN8801S PHY Driver for Uboot ++ * NOTES: ++ * ++ * Copyright (C) 2023 Airoha Technology Corp. ++ *************************************************/ ++ ++#ifndef __EN8801S_H ++#define __EN8801S_H ++ ++/************************************************************************ ++* D E F I N E S ++************************************************************************/ ++#define AIR_UBOOT_REVISION ((((U_BOOT_VERSION_NUM / 1000) % 10) << 20) | \ ++ (((U_BOOT_VERSION_NUM / 100) % 10) << 16) | \ ++ (((U_BOOT_VERSION_NUM / 10) % 10) << 12) | \ ++ ((U_BOOT_VERSION_NUM % 10) << 8) | \ ++ (((U_BOOT_VERSION_NUM_PATCH / 10) % 10) << 4) | \ ++ ((U_BOOT_VERSION_NUM_PATCH % 10) << 0)) ++ ++#define EN8801S_MDIO_DEFAULT_ID 0x1d ++#define EN8801S_PBUS_DEFAULT_ID (EN8801S_MDIO_DEFAULT_ID + 1) ++#define EN8801S_MDIO_PHY_ID 0x18 /* Range PHY_ADDRESS_RANGE .. 0x1e */ ++#define EN8801S_PBUS_PHY_ID (EN8801S_MDIO_PHY_ID + 1) ++#define EN8801S_DRIVER_VERSION "v1.1.3" ++ ++#define EN8801S_RG_ETHER_PHY_OUI 0x19a4 ++#define EN8801S_RG_SMI_ADDR 0x19a8 ++#define EN8801S_PBUS_OUI 0x17a5 ++#define EN8801S_RG_BUCK_CTL 0x1a20 ++#define EN8801S_RG_LTR_CTL 0x0cf8 ++ ++#define EN8801S_PHY_ID1 0x03a2 ++#define EN8801S_PHY_ID2 0x9461 ++#define EN8801S_PHY_ID (unsigned long)((EN8801S_PHY_ID1 << 16) | EN8801S_PHY_ID2) ++ ++/* ++SFP Sample for verification ++Tx Reverse, Rx Reverse ++*/ ++#define EN8801S_TX_POLARITY_NORMAL 0x0 ++#define EN8801S_TX_POLARITY_REVERSE 0x1 ++ ++#define EN8801S_RX_POLARITY_NORMAL (0x1 << 1) ++#define EN8801S_RX_POLARITY_REVERSE (0x0 << 1) ++ ++#ifndef BIT ++#define BIT(nr) (1UL << (nr)) ++#endif ++ ++#define MAX_RETRY 5 ++#define MAX_OUI_CHECK 2 ++ ++/* CL45 MDIO control */ ++#define MII_MMD_ACC_CTL_REG 0x0d ++#define MII_MMD_ADDR_DATA_REG 0x0e ++#define MMD_OP_MODE_DATA BIT(14) ++ ++#define MAX_TRG_COUNTER 5 ++ ++/* TokenRing Reg Access */ ++#define TrReg_PKT_XMT_STA 0x8000 ++#define TrReg_WR 0x8000 ++#define TrReg_RD 0xA000 ++ ++#define RgAddr_LPI_1Ch 0x1c ++#define RgAddr_AUXILIARY_1Dh 0x1d ++#define RgAddr_PMA_00h 0x0f80 ++#define RgAddr_PMA_01h 0x0f82 ++#define RgAddr_PMA_17h 0x0fae ++#define RgAddr_PMA_18h 0x0fb0 ++#define RgAddr_DSPF_03h 0x1686 ++#define RgAddr_DSPF_06h 0x168c ++#define RgAddr_DSPF_08h 0x1690 ++#define RgAddr_DSPF_0Ch 0x1698 ++#define RgAddr_DSPF_0Dh 0x169a ++#define RgAddr_DSPF_0Fh 0x169e ++#define RgAddr_DSPF_10h 0x16a0 ++#define RgAddr_DSPF_11h 0x16a2 ++#define RgAddr_DSPF_13h 0x16a6 ++#define RgAddr_DSPF_14h 0x16a8 ++#define RgAddr_DSPF_1Bh 0x16b6 ++#define RgAddr_DSPF_1Ch 0x16b8 ++#define RgAddr_TR_26h 0x0ecc ++#define RgAddr_R1000DEC_15h 0x03aa ++#define RgAddr_R1000DEC_17h 0x03ae ++ ++/* ++The following led_cfg example is for reference only. ++LED5 1000M/LINK/ACT (GPIO5) <-> BASE_T_LED0, ++LED6 10/100M/LINK/ACT(GPIO9) <-> BASE_T_LED1, ++LED4 100M/LINK/ACT (GPIO8) <-> BASE_T_LED2, ++*/ ++/* User-defined.B */ ++#define BASE_T_LED0_ON_CFG (LED_ON_EVT_LINK_1000M) ++#define BASE_T_LED0_BLK_CFG (LED_BLK_EVT_1000M_TX_ACT | LED_BLK_EVT_1000M_RX_ACT) ++#define BASE_T_LED1_ON_CFG (LED_ON_EVT_LINK_100M | LED_ON_EVT_LINK_10M) ++#define BASE_T_LED1_BLK_CFG (LED_BLK_EVT_100M_TX_ACT | LED_BLK_EVT_100M_RX_ACT | \ ++ LED_BLK_EVT_10M_TX_ACT | LED_BLK_EVT_10M_RX_ACT ) ++#define BASE_T_LED2_ON_CFG (LED_ON_EVT_LINK_100M) ++#define BASE_T_LED2_BLK_CFG (LED_BLK_EVT_100M_TX_ACT | LED_BLK_EVT_100M_RX_ACT) ++#define BASE_T_LED3_ON_CFG (0x0) ++#define BASE_T_LED3_BLK_CFG (0x0) ++/* User-defined.E */ ++ ++#define EN8801S_LED_COUNT 4 ++ ++#define LED_BCR (0x021) ++#define LED_BCR_EXT_CTRL (1 << 15) ++#define LED_BCR_CLK_EN (1 << 3) ++#define LED_BCR_TIME_TEST (1 << 2) ++#define LED_BCR_MODE_MASK (3) ++#define LED_BCR_MODE_DISABLE (0) ++#define LED_ON_CTRL(i) (0x024 + ((i)*2)) ++#define LED_ON_EN (1 << 15) ++#define LED_ON_POL (1 << 14) ++#define LED_ON_EVT_MASK (0x7f) ++/* LED ON Event Option.B */ ++#define LED_ON_EVT_FORCE (1 << 6) ++#define LED_ON_EVT_LINK_DOWN (1 << 3) ++#define LED_ON_EVT_LINK_10M (1 << 2) ++#define LED_ON_EVT_LINK_100M (1 << 1) ++#define LED_ON_EVT_LINK_1000M (1 << 0) ++/* LED ON Event Option.E */ ++#define LED_BLK_CTRL(i) (0x025 + ((i)*2)) ++#define LED_BLK_EVT_MASK (0x3ff) ++/* LED Blinking Event Option.B*/ ++#define LED_BLK_EVT_FORCE (1 << 9) ++#define LED_BLK_EVT_10M_RX_ACT (1 << 5) ++#define LED_BLK_EVT_10M_TX_ACT (1 << 4) ++#define LED_BLK_EVT_100M_RX_ACT (1 << 3) ++#define LED_BLK_EVT_100M_TX_ACT (1 << 2) ++#define LED_BLK_EVT_1000M_RX_ACT (1 << 1) ++#define LED_BLK_EVT_1000M_TX_ACT (1 << 0) ++/* LED Blinking Event Option.E*/ ++#define LED_ON_DUR (0x022) ++#define LED_ON_DUR_MASK (0xffff) ++#define LED_BLK_DUR (0x023) ++#define LED_BLK_DUR_MASK (0xffff) ++ ++#define LED_ENABLE 1 ++#define LED_DISABLE 0 ++ ++#define UNIT_LED_BLINK_DURATION 1024 ++ ++#define AIR_RTN_ON_ERR(cond, err) \ ++ do { if ((cond)) return (err); } while(0) ++ ++#define AIR_RTN_ERR(err) AIR_RTN_ON_ERR(err < 0, err) ++ ++#define LED_SET_EVT(reg, cod, result, bit) do \ ++ { \ ++ if(reg & cod) { \ ++ result |= bit; \ ++ } \ ++ } while(0) ++ ++#define LED_SET_GPIO_SEL(gpio, led, val) do \ ++ { \ ++ val |= (led << (8 * (gpio % 4))); \ ++ } while(0) ++ ++/* DATA TYPE DECLARATIONS ++ */ ++typedef struct ++{ ++ int DATA_Lo; ++ int DATA_Hi; ++}TR_DATA_T; ++ ++typedef union ++{ ++ struct ++ { ++ /* b[15:00] */ ++ int smi_deton_wt : 3; ++ int smi_det_mdi_inv : 1; ++ int smi_detoff_wt : 3; ++ int smi_sigdet_debouncing_en : 1; ++ int smi_deton_th : 6; ++ int rsv_14 : 2; ++ } DataBitField; ++ int DATA; ++} gephy_all_REG_LpiReg1Ch, *Pgephy_all_REG_LpiReg1Ch; ++ ++typedef union ++{ ++ struct ++ { ++ /* b[15:00] */ ++ int rg_smi_detcnt_max : 6; ++ int rsv_6 : 2; ++ int rg_smi_det_max_en : 1; ++ int smi_det_deglitch_off : 1; ++ int rsv_10 : 6; ++ } DataBitField; ++ int DATA; ++} gephy_all_REG_dev1Eh_reg324h, *Pgephy_all_REG_dev1Eh_reg324h; ++ ++typedef union ++{ ++ struct ++ { ++ /* b[15:00] */ ++ int da_tx_i2mpb_a_tbt : 6; ++ int rsv_6 : 4; ++ int da_tx_i2mpb_a_gbe : 6; ++ } DataBitField; ++ int DATA; ++} gephy_all_REG_dev1Eh_reg012h, *Pgephy_all_REG_dev1Eh_reg012h; ++ ++typedef union ++{ ++ struct ++ { ++ /* b[15:00] */ ++ int da_tx_i2mpb_b_tbt : 6; ++ int rsv_6 : 2; ++ int da_tx_i2mpb_b_gbe : 6; ++ int rsv_14 : 2; ++ } DataBitField; ++ int DATA; ++} gephy_all_REG_dev1Eh_reg017h, *Pgephy_all_REG_dev1Eh_reg017h; ++ ++typedef struct AIR_BASE_T_LED_CFG_S ++{ ++ u16 en; ++ u16 gpio; ++ u16 pol; ++ u16 on_cfg; ++ u16 blk_cfg; ++}AIR_BASE_T_LED_CFG_T; ++ ++typedef enum ++{ ++ AIR_LED_BLK_DUR_32M, ++ AIR_LED_BLK_DUR_64M, ++ AIR_LED_BLK_DUR_128M, ++ AIR_LED_BLK_DUR_256M, ++ AIR_LED_BLK_DUR_512M, ++ AIR_LED_BLK_DUR_1024M, ++ AIR_LED_BLK_DUR_LAST ++} AIR_LED_BLK_DUT_T; ++ ++typedef enum ++{ ++ AIR_ACTIVE_LOW, ++ AIR_ACTIVE_HIGH, ++} AIR_LED_POLARITY; ++typedef enum ++{ ++ AIR_LED_MODE_DISABLE, ++ AIR_LED_MODE_USER_DEFINE, ++ AIR_LED_MODE_LAST ++} AIR_LED_MODE_T; ++ ++/************************************************************************ ++* F U N C T I O N P R O T O T Y P E S ++************************************************************************/ ++ ++unsigned long airoha_pbus_read(struct mii_dev *bus, int pbus_addr, int pbus_reg); ++int airoha_pbus_write(struct mii_dev *bus, int pbus_addr, int pbus_reg, unsigned long pbus_data); ++int airoha_phy_process(void); ++#endif /* __EN8801S_H */ +--- /dev/null ++++ b/drivers/net/phy/air_en8811h.c +@@ -0,0 +1,725 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/************************************************* ++ * FILE NAME: air_en8811h.c ++ * PURPOSE: ++ * EN8811H PHY Driver for Uboot ++ * NOTES: ++ * ++ * Copyright (C) 2023 Airoha Technology Corp. ++ *************************************************/ ++ ++/* INCLUDE FILE DECLARATIONS ++*/ ++#include ++#include ++#include ++#include ++#include ++#include ++#include "air_en8811h.h" ++ ++#ifdef CONFIG_PHY_AIROHA_FW_IN_UBI ++#include ++#endif ++ ++#ifdef CONFIG_PHY_AIROHA_FW_IN_MMC ++#include ++#endif ++ ++#ifdef CONFIG_PHY_AIROHA_FW_IN_MTD ++#include ++#endif ++ ++#if AIR_UBOOT_REVISION > 0x202004 ++#include ++#endif ++ ++/************************** ++ * GPIO5 <-> BASE_T_LED0, ++ * GPIO4 <-> BASE_T_LED1, ++ * GPIO3 <-> BASE_T_LED2, ++ **************************/ ++/* User-defined.B */ ++#define AIR_LED_SUPPORT ++#ifdef AIR_LED_SUPPORT ++static const struct air_base_t_led_cfg_s led_cfg[3] = { ++/********************************************************************* ++ *Enable, GPIO, LED Polarity, LED ON, LED Blink ++**********************************************************************/ ++ {1, AIR_LED0_GPIO5, AIR_ACTIVE_HIGH, AIR_LED0_ON, AIR_LED0_BLK}, ++ {1, AIR_LED1_GPIO4, AIR_ACTIVE_HIGH, AIR_LED1_ON, AIR_LED1_BLK}, ++ {1, AIR_LED2_GPIO3, AIR_ACTIVE_HIGH, AIR_LED2_ON, AIR_LED2_BLK}, ++}; ++static const u16 led_dur = UNIT_LED_BLINK_DURATION << AIR_LED_BLK_DUR_64M; ++#endif ++/* User-defined.E */ ++/************************************************************* ++ * F U N C T I O N S ++ **************************************************************/ ++/* Airoha MII read function */ ++static int air_mii_cl22_read(struct mii_dev *bus, int phy_addr, int phy_register) ++{ ++ int read_data = bus->read(bus, phy_addr, MDIO_DEVAD_NONE, phy_register); ++ ++ if (read_data < 0) ++ return -EIO; ++ return read_data; ++} ++ ++/* Airoha MII write function */ ++static int air_mii_cl22_write(struct mii_dev *bus, int phy_addr, int phy_register, int write_data) ++{ ++ int ret = 0; ++ ++ ret = bus->write(bus, phy_addr, MDIO_DEVAD_NONE, phy_register, write_data); ++ if (ret < 0) { ++ printf("bus->write, ret: %d\n", ret); ++ return ret; ++ } ++ return ret; ++} ++ ++static int air_mii_cl45_read(struct phy_device *phydev, int devad, u16 reg) ++{ ++ int ret = 0; ++ int data; ++ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, devad); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return INVALID_DATA; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, reg); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return INVALID_DATA; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return INVALID_DATA; ++ } ++ data = phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG); ++ return data; ++} ++ ++static int air_mii_cl45_write(struct phy_device *phydev, int devad, u16 reg, u16 write_data) ++{ ++ int ret = 0; ++ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, devad); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, reg); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, write_data); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ return 0; ++} ++/* Use default PBUS_PHY_ID */ ++/* EN8811H PBUS write function */ ++static int air_pbus_reg_write(struct phy_device *phydev, unsigned long pbus_address, unsigned long pbus_data) ++{ ++ int ret = 0; ++ struct mii_dev *mbus = phydev->bus; ++ ++ ret = air_mii_cl22_write(mbus, ((phydev->addr) + 8), 0x1F, (unsigned int)(pbus_address >> 6)); ++ if (ret < 0) ++ return ret; ++ ret = air_mii_cl22_write(mbus, ((phydev->addr) + 8), (unsigned int)((pbus_address >> 2) & 0xf), (unsigned int)(pbus_data & 0xFFFF)); ++ if (ret < 0) ++ return ret; ++ ret = air_mii_cl22_write(mbus, ((phydev->addr) + 8), 0x10, (unsigned int)(pbus_data >> 16)); ++ if (ret < 0) ++ return ret; ++ return 0; ++} ++ ++/* EN8811H BUCK write function */ ++static int air_buckpbus_reg_write(struct phy_device *phydev, unsigned long pbus_address, unsigned int pbus_data) ++{ ++ int ret = 0; ++ ++ /* page 4 */ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)4); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x10, (unsigned int)0); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x11, (unsigned int)((pbus_address >> 16) & 0xffff)); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x12, (unsigned int)(pbus_address & 0xffff)); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x13, (unsigned int)((pbus_data >> 16) & 0xffff)); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, (unsigned int)(pbus_data & 0xffff)); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ return 0; ++} ++ ++/* EN8811H BUCK read function */ ++static unsigned int air_buckpbus_reg_read(struct phy_device *phydev, unsigned long pbus_address) ++{ ++ unsigned int pbus_data = 0, pbus_data_low, pbus_data_high; ++ int ret = 0; ++ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)4); /* page 4 */ ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return PBUS_INVALID_DATA; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x10, (unsigned int)0); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return PBUS_INVALID_DATA; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x15, (unsigned int)((pbus_address >> 16) & 0xffff)); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return PBUS_INVALID_DATA; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x16, (unsigned int)(pbus_address & 0xffff)); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return PBUS_INVALID_DATA; ++ } ++ ++ pbus_data_high = phy_read(phydev, MDIO_DEVAD_NONE, 0x17); ++ pbus_data_low = phy_read(phydev, MDIO_DEVAD_NONE, 0x18); ++ pbus_data = (pbus_data_high << 16) + pbus_data_low; ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)0); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ return pbus_data; ++} ++ ++static int MDIOWriteBuf(struct phy_device *phydev, unsigned long address, unsigned long array_size, const unsigned char *buffer) ++{ ++ unsigned int write_data, offset ; ++ int ret = 0; ++ ++ /* page 4 */ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)4); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ /* address increment*/ ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x10, (unsigned int)0x8000); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x11, (unsigned int)((address >> 16) & 0xffff)); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x12, (unsigned int)(address & 0xffff)); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ ++ for (offset = 0; offset < array_size; offset += 4) { ++ write_data = (buffer[offset + 3] << 8) | buffer[offset + 2]; ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x13, write_data); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ write_data = (buffer[offset + 1] << 8) | buffer[offset]; ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, write_data); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ } ++ ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)0); ++ if (ret < 0) { ++ printf("phy_write, ret: %d\n", ret); ++ return ret; ++ } ++ return 0; ++} ++ ++#ifdef AIR_LED_SUPPORT ++static int airoha_led_set_usr_def(struct phy_device *phydev, u8 entity, int polar, ++ u16 on_evt, u16 blk_evt) ++{ ++ int ret = 0; ++ ++ if (AIR_ACTIVE_HIGH == polar) ++ on_evt |= LED_ON_POL; ++ else ++ on_evt &= ~LED_ON_POL; ++ ++ ret = air_mii_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), on_evt | LED_ON_EN); ++ if (ret < 0) ++ return ret; ++ ret = air_mii_cl45_write(phydev, 0x1f, LED_BLK_CTRL(entity), blk_evt); ++ if (ret < 0) ++ return ret; ++ return 0; ++} ++ ++static int airoha_led_set_mode(struct phy_device *phydev, u8 mode) ++{ ++ u16 cl45_data; ++ int err = 0; ++ ++ cl45_data = air_mii_cl45_read(phydev, 0x1f, LED_BCR); ++ switch (mode) { ++ case AIR_LED_MODE_DISABLE: ++ cl45_data &= ~LED_BCR_EXT_CTRL; ++ cl45_data &= ~LED_BCR_MODE_MASK; ++ cl45_data |= LED_BCR_MODE_DISABLE; ++ break; ++ case AIR_LED_MODE_USER_DEFINE: ++ cl45_data |= LED_BCR_EXT_CTRL; ++ cl45_data |= LED_BCR_CLK_EN; ++ break; ++ default: ++ printf("LED mode%d is not supported!\n", mode); ++ return -EINVAL; ++ } ++ err = air_mii_cl45_write(phydev, 0x1f, LED_BCR, cl45_data); ++ if (err < 0) ++ return err; ++ return 0; ++} ++ ++static int airoha_led_set_state(struct phy_device *phydev, u8 entity, u8 state) ++{ ++ u16 cl45_data; ++ int err; ++ ++ cl45_data = air_mii_cl45_read(phydev, 0x1f, LED_ON_CTRL(entity)); ++ if (LED_ENABLE == state) ++ cl45_data |= LED_ON_EN; ++ else ++ cl45_data &= ~LED_ON_EN; ++ ++ err = air_mii_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), cl45_data); ++ if (err < 0) ++ return err; ++ return 0; ++} ++ ++static int en8811h_led_init(struct phy_device *phydev) ++{ ++ unsigned int led_gpio = 0, reg_value = 0; ++ u16 cl45_data = led_dur; ++ int ret, led_id; ++ ++ cl45_data = UNIT_LED_BLINK_DURATION << AIR_LED_BLK_DUR_64M; ++ ret = air_mii_cl45_write(phydev, 0x1f, LED_BLK_DUR, cl45_data); ++ if (ret < 0) ++ return ret; ++ cl45_data >>= 1; ++ ret = air_mii_cl45_write(phydev, 0x1f, LED_ON_DUR, cl45_data); ++ if (ret < 0) ++ return ret; ++ ++ ret = airoha_led_set_mode(phydev, AIR_LED_MODE_USER_DEFINE); ++ if (ret != 0) { ++ printf("LED fail to set mode, ret %d !\n", ret); ++ return ret; ++ } ++ for(led_id = 0; led_id < EN8811H_LED_COUNT; led_id++) ++ { ++ /* LED0 <-> GPIO5, LED1 <-> GPIO4, LED0 <-> GPIO3 */ ++ if ( led_cfg[led_id].gpio != (led_id + (AIR_LED0_GPIO5 - (2 * led_id)))) { ++ printf("LED%d uses incorrect GPIO%d !\n", led_id, led_cfg[led_id].gpio); ++ return -EINVAL; ++ } ++ reg_value = 0; ++ if (led_cfg[led_id].en == LED_ENABLE) ++ { ++ led_gpio |= BIT(led_cfg[led_id].gpio); ++ ret = airoha_led_set_state(phydev, led_id, led_cfg[led_id].en); ++ if (ret != 0) { ++ printf("LED fail to set state, ret %d !\n", ret); ++ return ret; ++ } ++ ret = airoha_led_set_usr_def(phydev, led_id, led_cfg[led_id].pol, led_cfg[led_id].on_cfg, led_cfg[led_id].blk_cfg); ++ if (ret != 0) { ++ printf("LED fail to set default, ret %d !\n", ret); ++ return ret; ++ } ++ } ++ } ++ ret = air_buckpbus_reg_write(phydev, 0xcf8b8, led_gpio); ++ if (ret < 0) ++ return ret; ++ printf("LED initialize OK !\n"); ++ return 0; ++} ++#endif /* AIR_LED_SUPPORT */ ++ ++static char *firmware_buf; ++static int en8811h_load_firmware(struct phy_device *phydev) ++{ ++ u32 pbus_value; ++ int ret = 0; ++ ++ if (!firmware_buf) { ++ firmware_buf = malloc(EN8811H_MD32_DM_SIZE + EN8811H_MD32_DSP_SIZE); ++ if (!firmware_buf) { ++ printf("[Airoha] cannot allocated buffer for firmware.\n"); ++ return -ENOMEM; ++ } ++ ++#ifdef CONFIG_PHY_AIROHA_FW_IN_UBI ++ ret = ubi_volume_read("en8811h-fw", firmware_buf, EN8811H_MD32_DM_SIZE + EN8811H_MD32_DSP_SIZE); ++ if (ret) { ++ printf("[Airoha] read firmware from UBI failed.\n"); ++ free(firmware_buf); ++ firmware_buf = NULL; ++ return ret; ++ } ++#elif defined(CONFIG_PHY_AIROHA_FW_IN_MMC) ++ struct mmc *mmc = find_mmc_device(0); ++ if (!mmc) { ++ printf("[Airoha] opening MMC device failed.\n"); ++ free(firmware_buf); ++ firmware_buf = NULL; ++ return -ENODEV; ++ } ++ if (mmc_init(mmc)) { ++ printf("[Airoha] initializing MMC device failed.\n"); ++ free(firmware_buf); ++ firmware_buf = NULL; ++ return -ENODEV; ++ } ++ if (IS_SD(mmc)) { ++ printf("[Airoha] SD card is not supported.\n"); ++ free(firmware_buf); ++ firmware_buf = NULL; ++ return -EINVAL; ++ } ++ ret = mmc_set_part_conf(mmc, 1, 2, 2); ++ if (ret) { ++ printf("[Airoha] cannot access eMMC boot1 hw partition.\n"); ++ free(firmware_buf); ++ firmware_buf = NULL; ++ return ret; ++ } ++ ret = blk_dread(mmc_get_blk_desc(mmc), 0, 0x120, firmware_buf); ++ mmc_set_part_conf(mmc, 1, 1, 0); ++ if (ret != 0x120) { ++ printf("[Airoha] cannot read firmware from eMMC.\n"); ++ free(firmware_buf); ++ firmware_buf = NULL; ++ return -EIO; ++ } ++#else ++#warning EN8811H firmware loading not implemented ++ free(firmware_buf); ++ firmware_buf = NULL; ++ return -EOPNOTSUPP; ++#endif ++ } ++ ++ ret = air_buckpbus_reg_write(phydev, 0x0f0018, 0x0); ++ if (ret < 0) ++ return ret; ++ pbus_value = air_buckpbus_reg_read(phydev, 0x800000); ++ pbus_value |= BIT(11); ++ ret = air_buckpbus_reg_write(phydev, 0x800000, pbus_value); ++ if (ret < 0) ++ return ret; ++ /* Download DM */ ++ ret = MDIOWriteBuf(phydev, 0x00000000, EN8811H_MD32_DM_SIZE, firmware_buf); ++ if (ret < 0) { ++ printf("[Airoha] MDIOWriteBuf 0x00000000 fail.\n"); ++ return ret; ++ } ++ /* Download PM */ ++ ret = MDIOWriteBuf(phydev, 0x00100000, EN8811H_MD32_DSP_SIZE, firmware_buf + EN8811H_MD32_DM_SIZE); ++ if (ret < 0) { ++ printf("[Airoha] MDIOWriteBuf 0x00100000 fail.\n"); ++ return ret; ++ } ++ pbus_value = air_buckpbus_reg_read(phydev, 0x800000); ++ pbus_value &= ~BIT(11); ++ ret = air_buckpbus_reg_write(phydev, 0x800000, pbus_value); ++ if (ret < 0) ++ return ret; ++ ret = air_buckpbus_reg_write(phydev, 0x0f0018, 0x01); ++ if (ret < 0) ++ return ret; ++ return 0; ++} ++ ++static int en8811h_config(struct phy_device *phydev) ++{ ++ int ret = 0; ++ int pid1 = 0, pid2 = 0; ++ ++ ret = air_pbus_reg_write(phydev, 0xcf928 , 0x0); ++ if (ret < 0) ++ return ret; ++ ++ pid1 = phy_read(phydev, MDIO_DEVAD_NONE, MII_PHYSID1); ++ pid2 = phy_read(phydev, MDIO_DEVAD_NONE, MII_PHYSID2); ++ if ((EN8811H_PHY_ID1 != pid1) || (EN8811H_PHY_ID2 != pid2)) { ++ printf("EN8811H does not exist !\n"); ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++ ++static int en8811h_get_autonego(struct phy_device *phydev, int *an) ++{ ++ int reg; ++ reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); ++ if (reg < 0) ++ return -EINVAL; ++ if (reg & BMCR_ANENABLE) ++ *an = AUTONEG_ENABLE; ++ else ++ *an = AUTONEG_DISABLE; ++ return 0; ++} ++ ++static int en8811h_startup(struct phy_device *phydev) ++{ ++ ofnode node = phy_get_ofnode(phydev); ++ int ret = 0, lpagb = 0, lpa = 0, common_adv_gb = 0, common_adv = 0, advgb = 0, adv = 0, reg = 0, an = AUTONEG_DISABLE, bmcr = 0, reg_value; ++ int old_link = phydev->link; ++ u32 pbus_value = 0, retry; ++ ++ eth_phy_reset(phydev->dev, 1); ++ mdelay(10); ++ eth_phy_reset(phydev->dev, 0); ++ mdelay(1); ++ ++ ret = en8811h_load_firmware(phydev); ++ if (ret) { ++ printf("EN8811H load firmware fail.\n"); ++ return ret; ++ } ++ retry = MAX_RETRY; ++ do { ++ mdelay(300); ++ reg_value = air_mii_cl45_read(phydev, 0x1e, 0x8009); ++ if (EN8811H_PHY_READY == reg_value) { ++ printf("EN8811H PHY ready!\n"); ++ break; ++ } ++ retry--; ++ } while (retry); ++ if (0 == retry) { ++ printf("EN8811H PHY is not ready. (MD32 FW Status reg: 0x%x)\n", reg_value); ++ pbus_value = air_buckpbus_reg_read(phydev, 0x3b3c); ++ printf("Check MD32 FW Version(0x3b3c) : %08x\n", pbus_value); ++ printf("EN8811H initialize fail!\n"); ++ return 0; ++ } ++ /* Mode selection*/ ++ printf("EN8811H Mode 1 !\n"); ++ ret = air_mii_cl45_write(phydev, 0x1e, 0x800c, 0x0); ++ if (ret < 0) ++ return ret; ++ ret = air_mii_cl45_write(phydev, 0x1e, 0x800d, 0x0); ++ if (ret < 0) ++ return ret; ++ ret = air_mii_cl45_write(phydev, 0x1e, 0x800e, 0x1101); ++ if (ret < 0) ++ return ret; ++ ret = air_mii_cl45_write(phydev, 0x1e, 0x800f, 0x0002); ++ if (ret < 0) ++ return ret; ++ ++ /* Serdes polarity */ ++ pbus_value = air_buckpbus_reg_read(phydev, 0xca0f8); ++ pbus_value &= 0xfffffffc; ++ pbus_value |= ofnode_read_bool(node, "airoha,rx-pol-reverse") ? ++ EN8811H_RX_POLARITY_REVERSE : EN8811H_RX_POLARITY_NORMAL; ++ pbus_value |= ofnode_read_bool(node, "airoha,tx-pol-reverse") ? ++ EN8811H_TX_POLARITY_REVERSE : EN8811H_TX_POLARITY_NORMAL; ++ ret = air_buckpbus_reg_write(phydev, 0xca0f8, pbus_value); ++ if (ret < 0) ++ return ret; ++ pbus_value = air_buckpbus_reg_read(phydev, 0xca0f8); ++ printf("Tx, Rx Polarity(0xca0f8): %08x\n", pbus_value); ++ pbus_value = air_buckpbus_reg_read(phydev, 0x3b3c); ++ printf("MD32 FW Version(0x3b3c) : %08x\n", pbus_value); ++#if defined(AIR_LED_SUPPORT) ++ ret = en8811h_led_init(phydev); ++ if (ret < 0) { ++ printf("en8811h_led_init fail\n"); ++ } ++#endif ++ printf("EN8811H initialize OK ! (%s)\n", EN8811H_DRIVER_VERSION); ++ ++ ret = genphy_update_link(phydev); ++ if (ret) ++ { ++ printf("ret %d!\n", ret); ++ return ret; ++ } ++ ++ ret = genphy_parse_link(phydev); ++ if (ret) ++ { ++ printf("ret %d!\n", ret); ++ return ret; ++ } ++ ++ if (old_link && phydev->link) ++ return 0; ++ ++ phydev->speed = SPEED_100; ++ phydev->duplex = DUPLEX_FULL; ++ phydev->pause = 0; ++ phydev->asym_pause = 0; ++ ++ reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); ++ if (reg < 0) ++ { ++ printf("MII_BMSR reg %d!\n", reg); ++ return reg; ++ } ++ reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); ++ if (reg < 0) ++ { ++ printf("MII_BMSR reg %d!\n", reg); ++ return reg; ++ } ++ if(reg & BMSR_LSTATUS) ++ { ++ pbus_value = air_buckpbus_reg_read(phydev, 0x109D4); ++ if (0x10 & pbus_value) { ++ phydev->speed = SPEED_2500; ++ phydev->duplex = DUPLEX_FULL; ++ } ++ else ++ { ++ ret = en8811h_get_autonego(phydev, &an); ++ if ((AUTONEG_ENABLE == an) && (0 == ret)) ++ { ++ printf("AN mode!\n"); ++ printf("SPEED 1000/100!\n"); ++ lpagb = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000); ++ if (lpagb < 0 ) ++ return lpagb; ++ advgb = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000); ++ if (adv < 0 ) ++ return adv; ++ common_adv_gb = (lpagb & (advgb << 2)); ++ ++ lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA); ++ if (lpa < 0 ) ++ return lpa; ++ adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); ++ if (adv < 0 ) ++ return adv; ++ common_adv = (lpa & adv); ++ ++ phydev->speed = SPEED_10; ++ phydev->duplex = DUPLEX_HALF; ++ if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF)) ++ { ++ phydev->speed = SPEED_1000; ++ if (common_adv_gb & LPA_1000FULL) ++ ++ phydev->duplex = DUPLEX_FULL; ++ } ++ else if (common_adv & (LPA_100FULL | LPA_100HALF)) ++ { ++ phydev->speed = SPEED_100; ++ if (common_adv & LPA_100FULL) ++ phydev->duplex = DUPLEX_FULL; ++ } ++ else ++ { ++ if (common_adv & LPA_10FULL) ++ phydev->duplex = DUPLEX_FULL; ++ } ++ } ++ else ++ { ++ printf("Force mode!\n"); ++ bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); ++ ++ if (bmcr < 0) ++ return bmcr; ++ ++ if (bmcr & BMCR_FULLDPLX) ++ phydev->duplex = DUPLEX_FULL; ++ else ++ phydev->duplex = DUPLEX_HALF; ++ ++ if (bmcr & BMCR_SPEED1000) ++ phydev->speed = SPEED_1000; ++ else if (bmcr & BMCR_SPEED100) ++ phydev->speed = SPEED_100; ++ else ++ phydev->speed = SPEED_100; ++ } ++ } ++ } ++ ++ return ret; ++} ++ ++#if AIR_UBOOT_REVISION > 0x202303 ++U_BOOT_PHY_DRIVER(en8811h) = { ++ .name = "Airoha EN8811H", ++ .uid = EN8811H_PHY_ID, ++ .mask = 0x0ffffff0, ++ .config = &en8811h_config, ++ .startup = &en8811h_startup, ++ .shutdown = &genphy_shutdown, ++}; ++#else ++static struct phy_driver AIR_EN8811H_driver = { ++ .name = "Airoha EN8811H", ++ .uid = EN8811H_PHY_ID, ++ .mask = 0x0ffffff0, ++ .config = &en8811h_config, ++ .startup = &en8811h_startup, ++ .shutdown = &genphy_shutdown, ++}; ++ ++int phy_air_en8811h_init(void) ++{ ++ phy_register(&AIR_EN8811H_driver); ++ return 0; ++} ++#endif +--- /dev/null ++++ b/drivers/net/phy/air_en8811h.h +@@ -0,0 +1,163 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/************************************************* ++ * FILE NAME: air_en8811h.h ++ * PURPOSE: ++ * EN8811H PHY Driver for Uboot ++ * NOTES: ++ * ++ * Copyright (C) 2023 Airoha Technology Corp. ++ *************************************************/ ++ ++#ifndef __EN8811H_H ++#define __EN8811H_H ++ ++#define AIR_UBOOT_REVISION ((((U_BOOT_VERSION_NUM / 1000) % 10) << 20) | \ ++ (((U_BOOT_VERSION_NUM / 100) % 10) << 16) | \ ++ (((U_BOOT_VERSION_NUM / 10) % 10) << 12) | \ ++ ((U_BOOT_VERSION_NUM % 10) << 8) | \ ++ (((U_BOOT_VERSION_NUM_PATCH / 10) % 10) << 4) | \ ++ ((U_BOOT_VERSION_NUM_PATCH % 10) << 0)) ++ ++#define EN8811H_PHY_ID1 0x03a2 ++#define EN8811H_PHY_ID2 0xa411 ++#define EN8811H_PHY_ID ((EN8811H_PHY_ID1 << 16) | EN8811H_PHY_ID2) ++#define EN8811H_SPEED_2500 0x03 ++#define EN8811H_PHY_READY 0x02 ++#define MAX_RETRY 5 ++ ++#define EN8811H_MD32_DM_SIZE 0x4000 ++#define EN8811H_MD32_DSP_SIZE 0x20000 ++ ++#define EN8811H_TX_POLARITY_NORMAL 0x1 ++#define EN8811H_TX_POLARITY_REVERSE 0x0 ++ ++#define EN8811H_RX_POLARITY_NORMAL (0x0 << 1) ++#define EN8811H_RX_POLARITY_REVERSE (0x1 << 1) ++ ++#ifndef BIT ++#define BIT(nr) (1UL << (nr)) ++#endif ++ ++/* CL45 MDIO control */ ++#define MII_MMD_ACC_CTL_REG 0x0d ++#define MII_MMD_ADDR_DATA_REG 0x0e ++#define MMD_OP_MODE_DATA BIT(14) ++/* MultiGBASE-T AN register */ ++#define MULTIG_ANAR_2500M (0x0080) ++#define MULTIG_LPAR_2500M (0x0020) ++ ++#define EN8811H_DRIVER_VERSION "v1.0.4" ++ ++/************************************************************ ++ * For reference only ++ * LED0 Link 2500/Blink 2500 TxRx (GPIO5) <-> BASE_T_LED0, ++ * LED1 Link 1000/Blink 1000 TxRx (GPIO4) <-> BASE_T_LED1, ++ * LED2 Link 100/Blink 100 TxRx (GPIO3) <-> BASE_T_LED2, ++ ************************************************************/ ++/* User-defined.B */ ++#define AIR_LED0_ON (LED_ON_EVT_LINK_2500M) ++#define AIR_LED0_BLK (LED_BLK_EVT_2500M_TX_ACT | LED_BLK_EVT_2500M_RX_ACT) ++#define AIR_LED1_ON (LED_ON_EVT_LINK_1000M) ++#define AIR_LED1_BLK (LED_BLK_EVT_1000M_TX_ACT | LED_BLK_EVT_1000M_RX_ACT) ++#define AIR_LED2_ON (LED_ON_EVT_LINK_100M) ++#define AIR_LED2_BLK (LED_BLK_EVT_100M_TX_ACT | LED_BLK_EVT_100M_RX_ACT) ++/* User-defined.E */ ++ ++#define LED_ON_CTRL(i) (0x024 + ((i)*2)) ++#define LED_ON_EN (1 << 15) ++#define LED_ON_POL (1 << 14) ++#define LED_ON_EVT_MASK (0x1ff) ++/* LED ON Event Option.B */ ++#define LED_ON_EVT_LINK_2500M (1 << 8) ++#define LED_ON_EVT_FORCE (1 << 6) ++#define LED_ON_EVT_HDX (1 << 5) ++#define LED_ON_EVT_FDX (1 << 4) ++#define LED_ON_EVT_LINK_DOWN (1 << 3) ++#define LED_ON_EVT_LINK_100M (1 << 1) ++#define LED_ON_EVT_LINK_1000M (1 << 0) ++/* LED ON Event Option.E */ ++ ++#define LED_BLK_CTRL(i) (0x025 + ((i)*2)) ++#define LED_BLK_EVT_MASK (0xfff) ++/* LED Blinking Event Option.B*/ ++#define LED_BLK_EVT_2500M_RX_ACT (1 << 11) ++#define LED_BLK_EVT_2500M_TX_ACT (1 << 10) ++#define LED_BLK_EVT_FORCE (1 << 9) ++#define LED_BLK_EVT_100M_RX_ACT (1 << 3) ++#define LED_BLK_EVT_100M_TX_ACT (1 << 2) ++#define LED_BLK_EVT_1000M_RX_ACT (1 << 1) ++#define LED_BLK_EVT_1000M_TX_ACT (1 << 0) ++/* LED Blinking Event Option.E*/ ++#define LED_ENABLE 1 ++#define LED_DISABLE 0 ++ ++#define EN8811H_LED_COUNT 3 ++ ++#define LED_BCR (0x021) ++#define LED_BCR_EXT_CTRL (1 << 15) ++#define LED_BCR_CLK_EN (1 << 3) ++#define LED_BCR_TIME_TEST (1 << 2) ++#define LED_BCR_MODE_MASK (3) ++#define LED_BCR_MODE_DISABLE (0) ++#define LED_BCR_MODE_2LED (1) ++#define LED_BCR_MODE_3LED_1 (2) ++#define LED_BCR_MODE_3LED_2 (3) ++ ++#define LED_ON_DUR (0x022) ++#define LED_ON_DUR_MASK (0xffff) ++ ++#define LED_BLK_DUR (0x023) ++#define LED_BLK_DUR_MASK (0xffff) ++ ++#define LED_GPIO_SEL_MASK 0x7FFFFFF ++ ++#define UNIT_LED_BLINK_DURATION 1024 ++ ++#define INVALID_DATA 0xffff ++#define PBUS_INVALID_DATA 0xffffffff ++ ++struct air_base_t_led_cfg_s { ++ u16 en; ++ u16 gpio; ++ u16 pol; ++ u16 on_cfg; ++ u16 blk_cfg; ++}; ++ ++enum { ++ AIR_LED2_GPIO3 = 3, ++ AIR_LED1_GPIO4, ++ AIR_LED0_GPIO5, ++ AIR_LED_LAST ++}; ++ ++enum { ++ AIR_BASE_T_LED0, ++ AIR_BASE_T_LED1, ++ AIR_BASE_T_LED2, ++ AIR_BASE_T_LED3 ++}; ++ ++enum { ++ AIR_LED_BLK_DUR_32M, ++ AIR_LED_BLK_DUR_64M, ++ AIR_LED_BLK_DUR_128M, ++ AIR_LED_BLK_DUR_256M, ++ AIR_LED_BLK_DUR_512M, ++ AIR_LED_BLK_DUR_1024M, ++ AIR_LED_BLK_DUR_LAST ++}; ++ ++enum { ++ AIR_ACTIVE_LOW, ++ AIR_ACTIVE_HIGH, ++}; ++ ++enum { ++ AIR_LED_MODE_DISABLE, ++ AIR_LED_MODE_USER_DEFINE, ++ AIR_LED_MODE_LAST ++}; ++ ++#endif /* End of __EN8811H_MD32_H */ ++ +--- a/drivers/net/eth-phy-uclass.c ++++ b/drivers/net/eth-phy-uclass.c +@@ -155,7 +155,7 @@ static int eth_phy_of_to_plat(struct ude + return 0; + } + +-static void eth_phy_reset(struct udevice *dev, int value) ++void eth_phy_reset(struct udevice *dev, int value) + { + struct eth_phy_device_priv *uc_priv = dev_get_uclass_priv(dev); + u32 delay; +--- a/include/eth_phy.h ++++ b/include/eth_phy.h +@@ -14,5 +14,6 @@ int eth_phy_binds_nodes(struct udevice * + int eth_phy_set_mdio_bus(struct udevice *eth_dev, struct mii_dev *mdio_bus); + struct mii_dev *eth_phy_get_mdio_bus(struct udevice *eth_dev); + int eth_phy_get_addr(struct udevice *dev); ++void eth_phy_reset(struct udevice *dev, int value); + + #endif diff --git a/package/boot/uboot-mediatek/patches/442-add-bpi-r3-mini.patch b/package/boot/uboot-mediatek/patches/442-add-bpi-r3-mini.patch new file mode 100644 index 0000000000..5df81ae7a1 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/442-add-bpi-r3-mini.patch @@ -0,0 +1,779 @@ +--- /dev/null ++++ b/configs/mt7986a_bpi-r3-mini-emmc_defconfig +@@ -0,0 +1,203 @@ ++CONFIG_ARM=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TARGET_MT7986=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-mini" ++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3-mini_emmc_env" ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-mini.dtb" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_OF_SYSTEM_SETUP=y ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_SMBIOS_PRODUCT_NAME="" ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_CFB_CONSOLE_ANSI=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_GPIO_HOG=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_FIT=y ++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_SYS_PROMPT="MT7986> " ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_BOOTP=y ++CONFIG_CMD_BUTTON=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_CPU=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_ECHO=y ++CONFIG_CMD_ENV_READMEM=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FDT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_ITEST=y ++CONFIG_CMD_LED=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_LINK_LOCAL=y ++# CONFIG_CMD_MBR is not set ++CONFIG_CMD_MDIO=y ++CONFIG_CMD_MII=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_TFTPBOOT=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_SLEEP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_SOURCE=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_UUID=y ++CONFIG_DISPLAY_CPUINFO=y ++CONFIG_DM_MDIO=y ++CONFIG_DM_MMC=y ++CONFIG_DM_MTD=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_DM_USB=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_PARTITION_UUIDS=y ++CONFIG_NETCONSOLE=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_DM_GPIO=y ++CONFIG_DM_SCSI=y ++CONFIG_AHCI=y ++CONFIG_AHCI_PCI=y ++CONFIG_SCSI_AHCI=y ++CONFIG_SCSI=y ++CONFIG_CMD_SCSI=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PHY_ETHERNET_ID=y ++CONFIG_PHY_FIXED=y ++CONFIG_MTK_AHCI=y ++CONFIG_DM_ETH=y ++CONFIG_DM_ETH_PHY=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY_AIROHA=y ++CONFIG_PHY_AIROHA_EN8811H=y ++CONFIG_PHY_AIROHA_FW_IN_MMC=y ++CONFIG_PCI=y ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_DM_PCI=y ++CONFIG_PCIE_MEDIATEK=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7622=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_MMC=y ++CONFIG_MMC_DEFAULT_DEV=1 ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_MMC_SUPPORTS_TUNING=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y ++CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_WDT_MTK=y ++CONFIG_LZO=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_RANDOM_UUID=y ++CONFIG_REGEX=y ++CONFIG_USB=y ++CONFIG_USB_HOST=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_MMC=y ++CONFIG_ENV_OFFSET=0x400000 ++CONFIG_ENV_OFFSET_REDUND=0x440000 ++CONFIG_ENV_SIZE=0x40000 ++CONFIG_ENV_SIZE_REDUND=0x40000 ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7986=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_HEXDUMP=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTK_SPIM=y ++#CONFIG_MTK_SNOR=y ++CONFIG_DM_SPI_FLASH=y ++CONFIG_SPI_FLASH_MTD=y ++CONFIG_SPI_FLASH_WINBOND=y ++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set ++CONFIG_CMD_SF=y ++CONFIG_CMD_NAND=y ++CONFIG_CMD_NAND_TRIMFFS=y ++CONFIG_LMB_MAX_REGIONS=64 ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" +--- /dev/null ++++ b/configs/mt7986a_bpi-r3-mini-snand_defconfig +@@ -0,0 +1,203 @@ ++CONFIG_ARM=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TARGET_MT7986=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-mini" ++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3-mini_snand_env" ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-mini.dtb" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_OF_SYSTEM_SETUP=y ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_SMBIOS_PRODUCT_NAME="" ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_CFB_CONSOLE_ANSI=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_GPIO_HOG=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_FIT=y ++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_SYS_PROMPT="MT7986> " ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_BOOTP=y ++CONFIG_CMD_BUTTON=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_CPU=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_ECHO=y ++CONFIG_CMD_ENV_READMEM=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FDT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_ITEST=y ++CONFIG_CMD_LED=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_LINK_LOCAL=y ++# CONFIG_CMD_MBR is not set ++CONFIG_CMD_MDIO=y ++CONFIG_CMD_MII=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_TFTPBOOT=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_SLEEP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_SOURCE=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_UUID=y ++CONFIG_DISPLAY_CPUINFO=y ++CONFIG_DM_MMC=y ++CONFIG_DM_MTD=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_DM_USB=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_PARTITION_UUIDS=y ++CONFIG_NETCONSOLE=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_DM_GPIO=y ++CONFIG_DM_SCSI=y ++CONFIG_AHCI=y ++CONFIG_AHCI_PCI=y ++CONFIG_SCSI_AHCI=y ++CONFIG_SCSI=y ++CONFIG_CMD_SCSI=y ++CONFIG_DM_MDIO=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PHY_ETHERNET_ID=y ++CONFIG_PHY_FIXED=y ++CONFIG_MTK_AHCI=y ++CONFIG_DM_ETH=y ++CONFIG_DM_ETH_PHY=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PCI=y ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_DM_PCI=y ++CONFIG_PCIE_MEDIATEK=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7622=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_MMC=y ++CONFIG_MMC_DEFAULT_DEV=1 ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_MMC_SUPPORTS_TUNING=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y ++CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_WDT_MTK=y ++CONFIG_LZO=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_RANDOM_UUID=y ++CONFIG_REGEX=y ++CONFIG_USB=y ++CONFIG_USB_HOST=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_SIZE=0x1f000 ++CONFIG_ENV_SIZE_REDUND=0x1f000 ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_MMC_HS200_SUPPORT=y ++CONFIG_MMC_MTK=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY_AIROHA=y ++CONFIG_PHY_AIROHA_EN8811H=y ++CONFIG_PHY_AIROHA_FW_IN_UBI=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7986=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_HEXDUMP=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTK_SPIM=y ++#CONFIG_MTK_SNOR=y ++#CONFIG_DM_SPI_FLASH=y ++#CONFIG_SPI_FLASH_MTD=y ++#CONFIG_SPI_FLASH_WINBOND=y ++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set ++#CONFIG_CMD_SF=y ++CONFIG_CMD_NAND=y ++CONFIG_CMD_NAND_TRIMFFS=y ++CONFIG_LMB_MAX_REGIONS=64 ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y +--- /dev/null ++++ b/bananapi_bpi-r3-mini_snand_env +@@ -0,0 +1,61 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=root=ubi.block=0,fit root=/dev/fit0 ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-mt7986a-bananapi-bpi-r3-mini ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-mini-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-mini-snand-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-mini-snand-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb ++bootfile_en8811h_fw=EthMD32.bin ++bootled_pwr=green:status ++bootled_rec=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NAND] ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load Airoha EN8811H firmware via TFTP then write to NAND.=run boot_tftp_write_en8811h_fw ; run bootmenu_confirm_return ++bootmenu_7=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_8=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_9=Reboot.=reset ++bootmenu_10=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_ubi=run boot_production ; run boot_recovery ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2 ++boot_tftp_write_en8811h_fw=tftpboot $loadaddr $bootfile_en8811h_fw && run ubi_write_en8811h_fw ++part_default=production ++part_recovery=recovery ++reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data ++snand_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr 0x0 0x40000 && mtd write bl2 $loadaddr 0x40000 0x40000 && mtd write bl2 $loadaddr 0x80000 0x40000 && mtd write bl2 $loadaddr 0xc0000 0x40000 ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_read_emmc_install=ubi check emmc_install && ubi read $loadaddr emmc_install ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_fip=ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000 ++ubi_write_en8811h_fw=ubi check en8811h-fw && ubi remove en8811h-fw ; ubi create en8811h-fw 0x24000 static ; ubi write $loadaddr en8811h-fw 0x24000 ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" +--- /dev/null ++++ b/bananapi_bpi-r3-mini_emmc_env +@@ -0,0 +1,59 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=root=/dev/fit0 ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi ++bootconf=config-mt7986a-bananapi-bpi-r3-mini ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-mini-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-mini-emmc-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-mini-emmc-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb ++bootfile_en8811h_fw=EthMD32.bin ++bootled_pwr=green:status ++bootled_rec=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) [eMMC] ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load Airoha EN8811H firmware via TFTP then write to NAND.=run boot_tftp_write_en8811h_fw ; run bootmenu_confirm_return ++bootmenu_7=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_8=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_9=Reboot.=reset ++bootmenu_10=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_emmc=run boot_production ; run boot_recovery ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2 ++boot_tftp_write_en8811h_fw=tftpboot $loadaddr $bootfile_en8811h_fw && run emmc_write_en8811h_fw ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size ++mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200 ++part_default=production ++part_recovery=recovery ++reset_factory=eraseenv && reset ++emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol ++emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol ++emmc_write_en8811h_fw=mmc partconf 0 1 2 2 && mmc erase 0x0 0x120 && mmc write $fileaddr 0x0 0x120 ; mmc partconf 0 1 1 0 ++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0 ++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800 ++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol ++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol ++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" +--- /dev/null ++++ b/arch/arm/dts/mt7986a-bpi-r3-mini.dts +@@ -0,0 +1,238 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++ ++/dts-v1/; ++#include "mt7986.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "Bananapi BPi-R3 Mini"; ++ compatible = "mediatek,mt7986", "mediatek,mt7986-rfb"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x80000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ button-reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 7 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ status_led: led-0 { ++ label = "green:status"; ++ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ led-1 { ++ label = "blue:wlan2g"; ++ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ led-2 { ++ label = "blue:wlan5g"; ++ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ reg_1p8v: regulator-1p8v { ++ compatible = "regulator-fixed"; ++ regulator-name = "fixed-1.8V"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ reg_3p3v: regulator-3p3v { ++ compatible = "regulator-fixed"; ++ regulator-name = "fixed-3.3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++}; ++ ++ð { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mdio_pins>; ++ ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ phy-handle = <&phy14>; ++ ++ phy14: eth-phy@e { ++ compatible = "ethernet-phy-id03a2.a411"; ++ reg = <14>; ++ ++ airoha,rx-pol-reverse; ++ ++ reset-gpios = <&gpio 49 GPIO_ACTIVE_LOW>; ++ reset-assert-us = <10000>; ++ reset-deassert-us = <20000>; ++ }; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_default>; ++ bus-width = <8>; ++ max-frequency = <200000000>; ++ cap-mmc-highspeed; ++ cap-mmc-hw-reset; ++ vmmc-supply = <®_3p3v>; ++ vqmmc-supply = <®_1p8v>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ mdio_pins: mdio-pins { ++ mux { ++ function = "eth"; ++ groups = "mdc_mdio"; ++ }; ++ ++ conf-en8811-pwr-a { ++ pins = "GPIO_11"; ++ drive-strength = ; ++ bias-pull-down = ; ++ output-low; ++ }; ++ ++ conf-en8811-pwr-b { ++ pins = "GPIO_12"; ++ drive-strength = ; ++ bias-pull-down = ; ++ output-low; ++ }; ++ }; ++ ++ mmc0_pins_default: mmc0default { ++ mux { ++ function = "flash"; ++ groups = "emmc_51"; ++ }; ++ ++ conf-cmd-dat { ++ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", ++ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", ++ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; ++ input-enable; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-clk { ++ pins = "EMMC_CK"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ ++ conf-dsl { ++ pins = "EMMC_DSL"; ++ bias-pull-down = ; ++ }; ++ ++ conf-rst { ++ pins = "EMMC_RSTB"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ }; ++ ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++ ++ pwm_pins: pwm0-pins-func-1 { ++ mux { ++ function = "pwm"; ++ groups = "pwm0"; ++ }; ++ }; ++}; ++ ++&pwm { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <1>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <20000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x80000>; ++ }; ++ ++ partition@80000 { ++ label = "ubi"; ++ reg = <0x80000 0x7f80000>; ++ }; ++ }; ++ }; ++ ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&watchdog { ++ status = "disabled"; ++};