From: Sebastian Gottschall Date: Thu, 12 Jan 2017 11:02:12 +0000 (+0200) Subject: ath10k: add VHT160 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bc1efd739b610a9cda31b82971b7a1e64a6144d1;p=openwrt%2Fstaging%2Fblogic.git ath10k: add VHT160 support This patch adds full VHT160 support for QCA9984 chipsets Tested on Netgear R7800. 80+80 is possible, but disabled so far since it seems to contain glitches like missing vht station flags (this may be firmware or mac80211 related). Signed-off-by: Sebastian Gottschall [kvalo@qca.qualcomm.com: refactoring and fix few warnings] Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 86d082cf4eef..32292c532819 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -702,6 +702,10 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar, /* 80MHZ */ case 2: status->vht_flag |= RX_VHT_FLAG_80MHZ; + break; + case 3: + status->vht_flag |= RX_VHT_FLAG_160MHZ; + break; } status->flag |= RX_FLAG_VHT; @@ -926,7 +930,7 @@ static void ath10k_process_rx(struct ath10k *ar, *status = *rx_status; ath10k_dbg(ar, ATH10K_DBG_DATA, - "rx skb %pK len %u peer %pM %s %s sn %u %s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%llx fcs-err %i mic-err %i amsdu-more %i\n", + "rx skb %pK len %u peer %pM %s %s sn %u %s%s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%llx fcs-err %i mic-err %i amsdu-more %i\n", skb, skb->len, ieee80211_get_SA(hdr), @@ -940,6 +944,7 @@ static void ath10k_process_rx(struct ath10k *ar, status->flag & RX_FLAG_VHT ? "vht" : "", status->flag & RX_FLAG_40MHZ ? "40" : "", status->vht_flag & RX_VHT_FLAG_80MHZ ? "80" : "", + status->vht_flag & RX_VHT_FLAG_160MHZ ? "160" : "", status->flag & RX_FLAG_SHORT_GI ? "sgi " : "", status->rate_idx, status->vht_nss, diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 2f6f777ae049..28bf19914fff 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -569,10 +569,14 @@ chan_to_phymode(const struct cfg80211_chan_def *chandef) case NL80211_CHAN_WIDTH_80: phymode = MODE_11AC_VHT80; break; + case NL80211_CHAN_WIDTH_160: + phymode = MODE_11AC_VHT160; + break; + case NL80211_CHAN_WIDTH_80P80: + phymode = MODE_11AC_VHT80_80; + break; case NL80211_CHAN_WIDTH_5: case NL80211_CHAN_WIDTH_10: - case NL80211_CHAN_WIDTH_80P80: - case NL80211_CHAN_WIDTH_160: phymode = MODE_UNKNOWN; break; } @@ -971,6 +975,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) arg.vdev_id = vdev_id; arg.channel.freq = channel->center_freq; arg.channel.band_center_freq1 = chandef->center_freq1; + arg.channel.band_center_freq2 = chandef->center_freq2; /* TODO setup this dynamically, what in case we don't have any vifs? */ @@ -1417,6 +1422,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, arg.channel.freq = chandef->chan->center_freq; arg.channel.band_center_freq1 = chandef->center_freq1; + arg.channel.band_center_freq2 = chandef->center_freq2; arg.channel.mode = chan_to_phymode(chandef); arg.channel.min_power = 0; @@ -2480,6 +2486,9 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar, if (sta->bandwidth == IEEE80211_STA_RX_BW_80) arg->peer_flags |= ar->wmi.peer_flags->bw80; + if (sta->bandwidth == IEEE80211_STA_RX_BW_160) + arg->peer_flags |= ar->wmi.peer_flags->bw160; + arg->peer_vht_rates.rx_max_rate = __le16_to_cpu(vht_cap->vht_mcs.rx_highest); arg->peer_vht_rates.rx_mcs_set = @@ -2536,6 +2545,18 @@ static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta *sta) static enum wmi_phy_mode ath10k_mac_get_phymode_vht(struct ath10k *ar, struct ieee80211_sta *sta) { + if (sta->bandwidth == IEEE80211_STA_RX_BW_160) { + switch (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: + return MODE_11AC_VHT160; + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: + return MODE_11AC_VHT80_80; + default: + /* not sure if this is a valid case? */ + return MODE_11AC_VHT160; + } + } + if (sta->bandwidth == IEEE80211_STA_RX_BW_80) return MODE_11AC_VHT80; @@ -4321,6 +4342,13 @@ static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) vht_cap.cap |= val; } + /* Currently the firmware seems to be buggy, don't enable 80+80 + * mode until that's resolved. + */ + if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) && + !(ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)) + vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; + mcs_map = 0; for (i = 0; i < 8; i++) { if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i))) @@ -6979,6 +7007,9 @@ static void ath10k_sta_rc_update(struct ieee80211_hw *hw, bw = WMI_PEER_CHWIDTH_80MHZ; break; case IEEE80211_STA_RX_BW_160: + bw = WMI_PEER_CHWIDTH_160MHZ; + break; + default: ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n", sta->bandwidth, sta->addr); bw = WMI_PEER_CHWIDTH_20MHZ; diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 1f6bb9e8bb01..f9188027a6f6 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -3637,6 +3637,7 @@ static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = { .vht = WMI_TLV_PEER_VHT, .bw80 = WMI_TLV_PEER_80MHZ, .pmf = WMI_TLV_PEER_PMF, + .bw160 = WMI_TLV_PEER_160MHZ, }; /************/ diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index b8aa6000573c..22cf011e839a 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -543,6 +543,7 @@ enum wmi_tlv_peer_flags { WMI_TLV_PEER_VHT = 0x02000000, WMI_TLV_PEER_80MHZ = 0x04000000, WMI_TLV_PEER_PMF = 0x08000000, + WMI_TLV_PEER_160MHZ = 0x20000000, }; enum wmi_tlv_tag { diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 50d6ee6afe26..e27cfc19754b 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -28,6 +28,7 @@ #include "wmi-ops.h" #include "p2p.h" #include "hw.h" +#include "hif.h" #define ATH10K_WMI_BARRIER_ECHO_ID 0xBA991E9 #define ATH10K_WMI_BARRIER_TIMEOUT_HZ (3 * HZ) @@ -1574,6 +1575,7 @@ static const struct wmi_peer_flags_map wmi_peer_flags_map = { .bw80 = WMI_PEER_80MHZ, .vht_2g = WMI_PEER_VHT_2G, .pmf = WMI_PEER_PMF, + .bw160 = WMI_PEER_160MHZ, }; static const struct wmi_peer_flags_map wmi_10x_peer_flags_map = { @@ -1591,6 +1593,7 @@ static const struct wmi_peer_flags_map wmi_10x_peer_flags_map = { .spatial_mux = WMI_10X_PEER_SPATIAL_MUX, .vht = WMI_10X_PEER_VHT, .bw80 = WMI_10X_PEER_80MHZ, + .bw160 = WMI_10X_PEER_160MHZ, }; static const struct wmi_peer_flags_map wmi_10_2_peer_flags_map = { @@ -1610,6 +1613,7 @@ static const struct wmi_peer_flags_map wmi_10_2_peer_flags_map = { .bw80 = WMI_10_2_PEER_80MHZ, .vht_2g = WMI_10_2_PEER_VHT_2G, .pmf = WMI_10_2_PEER_PMF, + .bw160 = WMI_10_2_PEER_160MHZ, }; void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, @@ -1634,7 +1638,10 @@ void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, ch->mhz = __cpu_to_le32(arg->freq); ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1); - ch->band_center_freq2 = 0; + if (arg->mode == MODE_11AC_VHT80_80) + ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq2); + else + ch->band_center_freq2 = 0; ch->min_power = arg->min_power; ch->max_power = arg->max_power; ch->reg_power = arg->max_reg_power; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 5d3dff95b2e5..861c2d8c6e8c 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -1728,8 +1728,10 @@ enum wmi_phy_mode { MODE_11AC_VHT20_2G = 11, MODE_11AC_VHT40_2G = 12, MODE_11AC_VHT80_2G = 13, - MODE_UNKNOWN = 14, - MODE_MAX = 14 + MODE_11AC_VHT80_80 = 14, + MODE_11AC_VHT160 = 15, + MODE_UNKNOWN = 16, + MODE_MAX = 16 }; static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) @@ -1757,6 +1759,10 @@ static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) return "11ac-vht40"; case MODE_11AC_VHT80: return "11ac-vht80"; + case MODE_11AC_VHT160: + return "11ac-vht160"; + case MODE_11AC_VHT80_80: + return "11ac-vht80+80"; case MODE_11AC_VHT20_2G: return "11ac-vht20-2g"; case MODE_11AC_VHT40_2G: @@ -1811,6 +1817,7 @@ struct wmi_channel { struct wmi_channel_arg { u32 freq; u32 band_center_freq1; + u32 band_center_freq2; bool passive; bool allow_ibss; bool allow_ht; @@ -1875,9 +1882,18 @@ enum wmi_channel_change_cause { #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 #define WMI_VHT_CAP_RX_LDPC 0x00000010 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 +#define WMI_VHT_CAP_SGI_160MHZ 0x00000040 #define WMI_VHT_CAP_TX_STBC 0x00000080 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 +#define WMI_VHT_CAP_SU_BFER 0x00000800 +#define WMI_VHT_CAP_SU_BFEE 0x00001000 +#define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 +#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 +#define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 +#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 +#define WMI_VHT_CAP_MU_BFER 0x00080000 +#define WMI_VHT_CAP_MU_BFEE 0x00100000 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 @@ -1926,6 +1942,8 @@ enum { REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ + REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ + REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ REGDMN_MODE_ALL = 0xffffffff }; @@ -5783,6 +5801,7 @@ enum wmi_peer_chwidth { WMI_PEER_CHWIDTH_20MHZ = 0, WMI_PEER_CHWIDTH_40MHZ = 1, WMI_PEER_CHWIDTH_80MHZ = 2, + WMI_PEER_CHWIDTH_160MHZ = 3, }; enum wmi_peer_param { @@ -5873,6 +5892,7 @@ struct wmi_peer_flags_map { u32 bw80; u32 vht_2g; u32 pmf; + u32 bw160; }; enum wmi_peer_flags { @@ -5892,6 +5912,7 @@ enum wmi_peer_flags { WMI_PEER_80MHZ = 0x04000000, WMI_PEER_VHT_2G = 0x08000000, WMI_PEER_PMF = 0x10000000, + WMI_PEER_160MHZ = 0x20000000 }; enum wmi_10x_peer_flags { @@ -5909,6 +5930,7 @@ enum wmi_10x_peer_flags { WMI_10X_PEER_SPATIAL_MUX = 0x00200000, WMI_10X_PEER_VHT = 0x02000000, WMI_10X_PEER_80MHZ = 0x04000000, + WMI_10X_PEER_160MHZ = 0x20000000 }; enum wmi_10_2_peer_flags { @@ -5928,6 +5950,7 @@ enum wmi_10_2_peer_flags { WMI_10_2_PEER_80MHZ = 0x04000000, WMI_10_2_PEER_VHT_2G = 0x08000000, WMI_10_2_PEER_PMF = 0x10000000, + WMI_10_2_PEER_160MHZ = 0x20000000 }; /*