From: Michael Pratt Date: Wed, 6 Dec 2023 19:29:26 +0000 (-0500) Subject: ramips: lzma-loader: use default uart for rt305x X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bc00c78b4338779ca1b7cd08411f76218d1f3205;p=openwrt%2Fstaging%2Fxback.git ramips: lzma-loader: use default uart for rt305x The rt305x series SOC have two UART devices, and the one at bus address 0x500 is disabled by default. Some boards do not even have a pinout for the first one, so use the same one that the kernel uses at 0xc00 instead. This allows the lzma-loader printing to be visible alongside the kernel log in the same console. Tested-by: Lech Perczak # zte,mf283plus Signed-off-by: Michael Pratt --- diff --git a/target/linux/ramips/image/lzma-loader/src/board.c b/target/linux/ramips/image/lzma-loader/src/board.c index 9f87cddec7..de02f58b9f 100644 --- a/target/linux/ramips/image/lzma-loader/src/board.c +++ b/target/linux/ramips/image/lzma-loader/src/board.c @@ -40,7 +40,7 @@ #define UART_LSR (UART_BASE + 0x14) #define UART_LSR_MASK UART_LSR_THRE #elif defined(SOC_RT305X) -#define UART_BASE KSEG1ADDR(0x10000500) +#define UART_BASE KSEG1ADDR(0x10000c00) #define UART_THR (UART_BASE + 0x04) #define UART_LSR (UART_BASE + 0x1c) #define UART_LSR_MASK UART_LSR_THRE