From: Dean Luick Date: Tue, 1 Dec 2015 20:38:15 +0000 (-0500) Subject: staging/rdma/hfi1: Add one-time LCB reset X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bbdeb33d2774ddc7475aab7868a5c447503a256e;p=openwrt%2Fstaging%2Fblogic.git staging/rdma/hfi1: Add one-time LCB reset Add one-time LCB reset on driver load to pre-emptively work around any LCB power cycle issues. Reviewed-by: Easwar Hariharan Signed-off-by: Dean Luick Signed-off-by: Jubin John Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rdma/hfi1/chip.c b/drivers/staging/rdma/hfi1/chip.c index bcbd831d2b73..62813052fc99 100644 --- a/drivers/staging/rdma/hfi1/chip.c +++ b/drivers/staging/rdma/hfi1/chip.c @@ -5896,6 +5896,23 @@ void init_qsfp(struct hfi1_pportdata *ppd) } } +/* + * Do a one-time initialize of the LCB block. + */ +static void init_lcb(struct hfi1_devdata *dd) +{ + /* the DC has been reset earlier in the driver load */ + + /* set LCB for cclk loopback on the port */ + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0x01); + write_csr(dd, DC_LCB_CFG_LANE_WIDTH, 0x00); + write_csr(dd, DC_LCB_CFG_REINIT_AS_SLAVE, 0x00); + write_csr(dd, DC_LCB_CFG_CNT_FOR_SKIP_STALL, 0x110); + write_csr(dd, DC_LCB_CFG_CLK_CNTR, 0x08); + write_csr(dd, DC_LCB_CFG_LOOPBACK, 0x02); + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0x00); +} + int bringup_serdes(struct hfi1_pportdata *ppd) { struct hfi1_devdata *dd = ppd->dd; @@ -5917,6 +5934,9 @@ int bringup_serdes(struct hfi1_pportdata *ppd) /* Set linkinit_reason on power up per OPA spec */ ppd->linkinit_reason = OPA_LINKINIT_REASON_LINKUP; + /* one-time init of the LCB */ + init_lcb(dd); + if (loopback) { ret = init_loopback(dd); if (ret < 0) diff --git a/drivers/staging/rdma/hfi1/chip_registers.h b/drivers/staging/rdma/hfi1/chip_registers.h index 5056c848af35..701e9e1012a6 100644 --- a/drivers/staging/rdma/hfi1/chip_registers.h +++ b/drivers/staging/rdma/hfi1/chip_registers.h @@ -318,6 +318,9 @@ #define DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT 0 #define DC_LCB_CFG_TX_FIFOS_RESET (DC_LCB_CSRS + 0x000000000008) #define DC_LCB_CFG_TX_FIFOS_RESET_VAL_SHIFT 0 +#define DC_LCB_CFG_REINIT_AS_SLAVE (DC_LCB_CSRS + 0x000000000030) +#define DC_LCB_CFG_CNT_FOR_SKIP_STALL (DC_LCB_CSRS + 0x000000000040) +#define DC_LCB_CFG_CLK_CNTR (DC_LCB_CSRS + 0x000000000110) #define DC_LCB_ERR_CLR (DC_LCB_CSRS + 0x000000000308) #define DC_LCB_ERR_EN (DC_LCB_CSRS + 0x000000000310) #define DC_LCB_ERR_FLG (DC_LCB_CSRS + 0x000000000300)