From: Linus Walleij Date: Tue, 6 Sep 2011 07:08:13 +0000 (+0100) Subject: ARM: 7081/1: mach-integrator: fix the clocksource X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bb9ea77846620ed2b37e74c852d72c7a476b248c;p=openwrt%2Fstaging%2Fblogic.git ARM: 7081/1: mach-integrator: fix the clocksource I was intrigued by the fact that the clock stood still on the Integrator, but it wasn't strange at all, because the timer was set up all wrong and probably has been for a while. With this patch the clock starts ticking again: make the timer periodic (reload), |= on the divisor bit and load the timer before starting it. Cc: stable@kernel.org Signed-off-by: Linus Walleij Signed-off-by: Russell King --- diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2fbbdd5eac35..fcf0ae95651f 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -337,15 +337,15 @@ static unsigned long timer_reload; static void integrator_clocksource_init(u32 khz) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; - u32 ctrl = TIMER_CTRL_ENABLE; + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; if (khz >= 1500) { khz /= 16; - ctrl = TIMER_CTRL_DIV16; + ctrl |= TIMER_CTRL_DIV16; } - writel(ctrl, base + TIMER_CTRL); writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); clocksource_mmio_init(base + TIMER_VALUE, "timer2", khz * 1000, 200, 16, clocksource_mmio_readl_down);