From: Ron Mercer <ron.mercer@qlogic.com>
Date: Mon, 23 Feb 2009 10:42:13 +0000 (+0000)
Subject: qlge: Clean up mac address and frame route settings.
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bb58b5b67c08b5fde08090917a040a07ac9d43de;p=openwrt%2Fstaging%2Fblogic.git

qlge: Clean up mac address and frame route settings.

Setting MAC addresses and routing frames to various queues will need to
be done in response to firmware events as well as during initialization.
This change encapsulates the facilities into a single call that can
later me made from other places.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index fd515afb1aa5..3a041b6d9fec 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -2958,6 +2958,24 @@ static int ql_route_initialize(struct ql_adapter *qdev)
 	return status;
 }
 
+static int ql_cam_route_initialize(struct ql_adapter *qdev)
+{
+	int status;
+
+	status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
+			     MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
+	if (status) {
+		QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
+		return status;
+	}
+
+	status = ql_route_initialize(qdev);
+	if (status)
+		QPRINTK(qdev, IFUP, ERR, "Failed to init routing table.\n");
+
+	return status;
+}
+
 static int ql_adapter_initialize(struct ql_adapter *qdev)
 {
 	u32 value, mask;
@@ -3028,16 +3046,11 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 		return status;
 	}
 
-	status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
-				     MAC_ADDR_TYPE_CAM_MAC, qdev->func);
-	if (status) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
-		return status;
-	}
-
-	status = ql_route_initialize(qdev);
+	/* Set up the MAC address and frame routing filter. */
+	status = ql_cam_route_initialize(qdev);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to init routing table.\n");
+		QPRINTK(qdev, IFUP, ERR,
+				"Failed to init CAM/Routing tables.\n");
 		return status;
 	}