From: Paul Burton Date: Fri, 8 Nov 2013 11:18:50 +0000 (+0000) Subject: malta: support for coreFPGA6 boards X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=baf37f06c5cc51d2b9d71a2c83d5d92de60203a9;p=project%2Fbcm63xx%2Fu-boot.git malta: support for coreFPGA6 boards This patch adds support for running on Malta boards using coreFPGA6 core cards, including support for the msc01 system controller used with them. The system controller is detected at runtime allowing one U-boot binary to run on a Malta with either. Due to the PCI I/O base differing between Maltas using gt64120 & msc01 system controllers, the UART setup is modified slightly. A second UART is added so that there is one pointing at the correct address for each system controller. The Malta board then defines its own default_serial_console function to select the correct one at runtime. The incorrect UART will simply not function. Tested on: - A coreFPGA6 Malta running interAptiv and proAptiv bitstreams, both with and without an L2 cache. - QEMU. Signed-off-by: Paul Burton --- diff --git a/arch/mips/include/asm/malta.h b/arch/mips/include/asm/malta.h index d4d44a299f..0b50a66e07 100644 --- a/arch/mips/include/asm/malta.h +++ b/arch/mips/include/asm/malta.h @@ -9,15 +9,38 @@ #ifndef _MIPS_ASM_MALTA_H #define _MIPS_ASM_MALTA_H -#define MALTA_IO_PORT_BASE 0x18000000 +#define MALTA_GT_BASE 0x1be00000 +#define MALTA_GT_PCIIO_BASE 0x18000000 +#define MALTA_GT_UART0_BASE (MALTA_GT_PCIIO_BASE + 0x3f8) -#define MALTA_UART_BASE (MALTA_IO_PORT_BASE + 0x3f8) +#define MALTA_MSC01_BIU_BASE 0x1bc80000 +#define MALTA_MSC01_PCI_BASE 0x1bd00000 +#define MALTA_MSC01_PBC_BASE 0x1bd40000 +#define MALTA_MSC01_IP1_BASE 0x1bc00000 +#define MALTA_MSC01_IP1_SIZE 0x00400000 +#define MALTA_MSC01_IP2_BASE1 0x10000000 +#define MALTA_MSC01_IP2_SIZE1 0x08000000 +#define MALTA_MSC01_IP2_BASE2 0x18000000 +#define MALTA_MSC01_IP2_SIZE2 0x04000000 +#define MALTA_MSC01_IP3_BASE 0x1c000000 +#define MALTA_MSC01_IP3_SIZE 0x04000000 +#define MALTA_MSC01_PCIMEM_BASE 0x10000000 +#define MALTA_MSC01_PCIMEM_SIZE 0x10000000 +#define MALTA_MSC01_PCIMEM_MAP 0x10000000 +#define MALTA_MSC01_PCIIO_BASE 0x1b000000 +#define MALTA_MSC01_PCIIO_SIZE 0x00800000 +#define MALTA_MSC01_PCIIO_MAP 0x00000000 +#define MALTA_MSC01_UART0_BASE (MALTA_MSC01_PCIIO_BASE + 0x3f8) -#define MALTA_GT_BASE 0x1be00000 +#define MALTA_RESET_BASE 0x1f000500 +#define GORESET 0x42 -#define MALTA_RESET_BASE 0x1f000500 -#define GORESET 0x42 +#define MALTA_FLASH_BASE 0x1fc00000 -#define MALTA_FLASH_BASE 0x1fc00000 +#define MALTA_REVISION 0x1fc00010 +#define MALTA_REVISION_CORID_SHF 10 +#define MALTA_REVISION_CORID_MSK (0x3f << MALTA_REVISION_CORID_SHF) +#define MALTA_REVISION_CORID_CORE_LV 1 +#define MALTA_REVISION_CORID_CORE_FPGA6 14 #endif /* _MIPS_ASM_MALTA_H */ diff --git a/board/imgtec/malta/lowlevel_init.S b/board/imgtec/malta/lowlevel_init.S index fa0b6a7d13..1af34f142f 100644 --- a/board/imgtec/malta/lowlevel_init.S +++ b/board/imgtec/malta/lowlevel_init.S @@ -6,6 +6,8 @@ #include #include +#include +#include #include #include @@ -25,6 +27,25 @@ .globl lowlevel_init lowlevel_init: + /* detect the core card */ + li t0, KSEG1ADDR(MALTA_REVISION) + lw t0, 0(t0) + srl t0, t0, MALTA_REVISION_CORID_SHF + andi t0, t0, (MALTA_REVISION_CORID_MSK >> \ + MALTA_REVISION_CORID_SHF) + + /* core cards using the gt64120 system controller */ + li t1, MALTA_REVISION_CORID_CORE_LV + beq t0, t1, _gt64120 + + /* core cards using the MSC01 system controller */ + li t1, MALTA_REVISION_CORID_CORE_FPGA6 + beq t0, t1, _msc01 + nop + + /* unknown system controller */ + b . + nop /* * Load BAR registers of GT64120 as done by YAMON @@ -39,7 +60,7 @@ lowlevel_init: * based on write_bootloader() in qemu.git/hw/mips_malta.c * see GT64120 manual and qemu.git/hw/gt64xxx.c for details */ - +_gt64120: /* move GT64120 registers from 0x14000000 to 0x1be00000 */ li t1, KSEG1ADDR(GT_DEF_BASE) li t0, CPU_TO_GT32(0xdf000000) @@ -67,3 +88,144 @@ lowlevel_init: jr ra nop + + /* + * + */ +_msc01: + /* setup peripheral bus controller clock divide */ + li t0, KSEG1ADDR(MALTA_MSC01_PBC_BASE) + li t1, 0x1 << MSC01_PBC_CLKCFG_SHF + sw t1, MSC01_PBC_CLKCFG_OFS(t0) + + /* tweak peripheral bus controller timings */ + li t1, (0x1 << MSC01_PBC_CS0TIM_CDT_SHF) | \ + (0x1 << MSC01_PBC_CS0TIM_CAT_SHF) + sw t1, MSC01_PBC_CS0TIM_OFS(t0) + li t1, (0x0 << MSC01_PBC_CS0RW_RDT_SHF) | \ + (0x2 << MSC01_PBC_CS0RW_RAT_SHF) | \ + (0x0 << MSC01_PBC_CS0RW_WDT_SHF) | \ + (0x2 << MSC01_PBC_CS0RW_WAT_SHF) + sw t1, MSC01_PBC_CS0RW_OFS(t0) + lw t1, MSC01_PBC_CS0CFG_OFS(t0) + li t2, MSC01_PBC_CS0CFG_DTYP_MSK + and t1, t2 + ori t1, (0x0 << MSC01_PBC_CS0CFG_ADM_SHF) | \ + (0x3 << MSC01_PBC_CS0CFG_WSIDLE_SHF) | \ + (0x10 << MSC01_PBC_CS0CFG_WS_SHF) + sw t1, MSC01_PBC_CS0CFG_OFS(t0) + + /* setup basic address decode */ + li t0, KSEG1ADDR(MALTA_MSC01_BIU_BASE) + li t1, 0x0 + li t2, -CONFIG_SYS_MEM_SIZE + sw t1, MSC01_BIU_MCBAS1L_OFS(t0) + sw t2, MSC01_BIU_MCMSK1L_OFS(t0) + sw t1, MSC01_BIU_MCBAS2L_OFS(t0) + sw t2, MSC01_BIU_MCMSK2L_OFS(t0) + + /* initialise IP1 - unused */ + li t1, MALTA_MSC01_IP1_BASE + li t2, -MALTA_MSC01_IP1_SIZE + sw t1, MSC01_BIU_IP1BAS1L_OFS(t0) + sw t2, MSC01_BIU_IP1MSK1L_OFS(t0) + sw t1, MSC01_BIU_IP1BAS2L_OFS(t0) + sw t2, MSC01_BIU_IP1MSK2L_OFS(t0) + + /* initialise IP2 - PCI */ + li t1, MALTA_MSC01_IP2_BASE1 + li t2, -MALTA_MSC01_IP2_SIZE1 + sw t1, MSC01_BIU_IP2BAS1L_OFS(t0) + sw t2, MSC01_BIU_IP2MSK1L_OFS(t0) + li t1, MALTA_MSC01_IP2_BASE2 + li t2, -MALTA_MSC01_IP2_SIZE2 + sw t1, MSC01_BIU_IP2BAS2L_OFS(t0) + sw t2, MSC01_BIU_IP2MSK2L_OFS(t0) + + /* initialise IP3 - peripheral bus controller */ + li t1, MALTA_MSC01_IP3_BASE + li t2, -MALTA_MSC01_IP3_SIZE + sw t1, MSC01_BIU_IP3BAS1L_OFS(t0) + sw t2, MSC01_BIU_IP3MSK1L_OFS(t0) + sw t1, MSC01_BIU_IP3BAS2L_OFS(t0) + sw t2, MSC01_BIU_IP3MSK2L_OFS(t0) + + /* setup PCI memory */ + li t0, KSEG1ADDR(MALTA_MSC01_PCI_BASE) + li t1, MALTA_MSC01_PCIMEM_BASE + li t2, (-MALTA_MSC01_PCIMEM_SIZE) & MSC01_PCI_SC2PMMSKL_MSK_MSK + li t3, MALTA_MSC01_PCIMEM_MAP + sw t1, MSC01_PCI_SC2PMBASL_OFS(t0) + sw t2, MSC01_PCI_SC2PMMSKL_OFS(t0) + sw t3, MSC01_PCI_SC2PMMAPL_OFS(t0) + + /* setup PCI I/O */ + li t1, MALTA_MSC01_PCIIO_BASE + li t2, (-MALTA_MSC01_PCIIO_SIZE) & MSC01_PCI_SC2PIOMSKL_MSK_MSK + li t3, MALTA_MSC01_PCIIO_MAP + sw t1, MSC01_PCI_SC2PIOBASL_OFS(t0) + sw t2, MSC01_PCI_SC2PIOMSKL_OFS(t0) + sw t3, MSC01_PCI_SC2PIOMAPL_OFS(t0) + + /* setup PCI_BAR0 memory window */ + li t1, -CONFIG_SYS_MEM_SIZE + sw t1, MSC01_PCI_BAR0_OFS(t0) + + /* setup PCI to SysCon/CPU translation */ + sw t1, MSC01_PCI_P2SCMSKL_OFS(t0) + sw zero, MSC01_PCI_P2SCMAPL_OFS(t0) + + /* setup PCI vendor & device IDs */ + li t1, (PCI_VENDOR_ID_MIPS << MSC01_PCI_HEAD0_VENDORID_SHF) | \ + (PCI_DEVICE_ID_MIPS_MSC01 << MSC01_PCI_HEAD0_DEVICEID_SHF) + sw t1, MSC01_PCI_HEAD0_OFS(t0) + + /* setup PCI subsystem vendor & device IDs */ + sw t1, MSC01_PCI_HEAD11_OFS(t0) + + /* setup PCI class, revision */ + li t1, (PCI_CLASS_BRIDGE_HOST << MSC01_PCI_HEAD2_CLASS_SHF) | \ + (0x1 << MSC01_PCI_HEAD2_REV_SHF) + sw t1, MSC01_PCI_HEAD2_OFS(t0) + + /* ensure a sane setup */ + sw zero, MSC01_PCI_HEAD3_OFS(t0) + sw zero, MSC01_PCI_HEAD4_OFS(t0) + sw zero, MSC01_PCI_HEAD5_OFS(t0) + sw zero, MSC01_PCI_HEAD6_OFS(t0) + sw zero, MSC01_PCI_HEAD7_OFS(t0) + sw zero, MSC01_PCI_HEAD8_OFS(t0) + sw zero, MSC01_PCI_HEAD9_OFS(t0) + sw zero, MSC01_PCI_HEAD10_OFS(t0) + sw zero, MSC01_PCI_HEAD12_OFS(t0) + sw zero, MSC01_PCI_HEAD13_OFS(t0) + sw zero, MSC01_PCI_HEAD14_OFS(t0) + sw zero, MSC01_PCI_HEAD15_OFS(t0) + + /* setup PCI command register */ + li t1, (PCI_COMMAND_FAST_BACK | \ + PCI_COMMAND_SERR | \ + PCI_COMMAND_PARITY | \ + PCI_COMMAND_MASTER | \ + PCI_COMMAND_MEMORY) + sw t1, MSC01_PCI_HEAD1_OFS(t0) + + /* setup PCI byte swapping */ +#ifdef CONFIG_SYS_BIG_ENDIAN + li t1, (0x1 << MSC01_PCI_SWAP_BAR0_BSWAP_SHF) | \ + (0x1 << MSC01_PCI_SWAP_IO_BSWAP_SHF) + sw t1, MSC01_PCI_SWAP_OFS(t0) +#else + sw zero, MSC01_PCI_SWAP_OFS(t0) +#endif + + /* enable PCI host configuration cycles */ + lw t1, MSC01_PCI_CFG_OFS(t0) + li t2, MSC01_PCI_CFG_RA_MSK | \ + MSC01_PCI_CFG_G_MSK | \ + MSC01_PCI_CFG_EN_MSK + or t1, t1, t2 + sw t1, MSC01_PCI_CFG_OFS(t0) + + jr ra + nop diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c index 09da9eae51..2af00672da 100644 --- a/board/imgtec/malta/malta.c +++ b/board/imgtec/malta/malta.c @@ -1,19 +1,67 @@ /* * Copyright (C) 2013 Gabor Juhos + * Copyright (C) 2013 Imagination Technologies * * SPDX-License-Identifier: GPL-2.0 */ #include #include +#include +#include +#include #include #include #include -#include #include "superio.h" +enum core_card { + CORE_UNKNOWN, + CORE_LV, + CORE_FPGA6, +}; + +enum sys_con { + SYSCON_UNKNOWN, + SYSCON_GT64120, + SYSCON_MSC01, +}; + +static enum core_card malta_core_card(void) +{ + u32 corid, rev; + + rev = __raw_readl(CKSEG1ADDR(MALTA_REVISION)); + corid = (rev & MALTA_REVISION_CORID_MSK) >> MALTA_REVISION_CORID_SHF; + + switch (corid) { + case MALTA_REVISION_CORID_CORE_LV: + return CORE_LV; + + case MALTA_REVISION_CORID_CORE_FPGA6: + return CORE_FPGA6; + + default: + return CORE_UNKNOWN; + } +} + +static enum sys_con malta_sys_con(void) +{ + switch (malta_core_card()) { + case CORE_LV: + return SYSCON_GT64120; + + case CORE_FPGA6: + return SYSCON_MSC01; + + default: + return SYSCON_UNKNOWN; + } +} + phys_size_t initdram(int board_type) { return CONFIG_SYS_MEM_SIZE; @@ -21,7 +69,25 @@ phys_size_t initdram(int board_type) int checkboard(void) { - puts("Board: MIPS Malta CoreLV (Qemu)\n"); + enum core_card core; + + puts("Board: MIPS Malta"); + + core = malta_core_card(); + switch (core) { + case CORE_LV: + puts(" CoreLV"); + break; + + case CORE_FPGA6: + puts(" CoreFPGA6"); + break; + + default: + puts(" CoreUnknown"); + } + + putc('\n'); return 0; } @@ -40,18 +106,62 @@ void _machine_restart(void) int board_early_init_f(void) { + void *io_base; + + /* choose correct PCI I/O base */ + switch (malta_sys_con()) { + case SYSCON_GT64120: + io_base = (void *)CKSEG1ADDR(MALTA_GT_PCIIO_BASE); + break; + + case SYSCON_MSC01: + io_base = (void *)CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE); + break; + + default: + return -1; + } + /* setup FDC37M817 super I/O controller */ - malta_superio_init((void *)CKSEG1ADDR(MALTA_IO_PORT_BASE)); + malta_superio_init(io_base); return 0; } +struct serial_device *default_serial_console(void) +{ + switch (malta_sys_con()) { + case SYSCON_GT64120: + return &eserial1_device; + + default: + case SYSCON_MSC01: + return &eserial2_device; + } +} + void pci_init_board(void) { - set_io_port_base(CKSEG1ADDR(MALTA_IO_PORT_BASE)); + switch (malta_sys_con()) { + case SYSCON_GT64120: + set_io_port_base(CKSEG1ADDR(MALTA_GT_PCIIO_BASE)); + + gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE), + 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE, + 0x10000000, 0x10000000, 128 * 1024 * 1024, + 0x00000000, 0x00000000, 0x20000); + break; + + default: + case SYSCON_MSC01: + set_io_port_base(CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE)); - gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE), - 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE, - 0x10000000, 0x10000000, 128 * 1024 * 1024, - 0x00000000, 0x00000000, 0x20000); + msc01_pci_init((void *)CKSEG1ADDR(MALTA_MSC01_PCI_BASE), + 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE, + MALTA_MSC01_PCIMEM_MAP, + CKSEG1ADDR(MALTA_MSC01_PCIMEM_BASE), + MALTA_MSC01_PCIMEM_SIZE, MALTA_MSC01_PCIIO_MAP, + 0x00000000, MALTA_MSC01_PCIIO_SIZE); + break; + } } diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 99d51a6a97..6182a5904d 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o obj-$(CONFIG_PCI) += pci.o pci_auto.o obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o +obj-$(CONFIG_PCI_MSC01) += pci_msc01.o obj-$(CONFIG_FTPCI100) += pci_ftpci100.o obj-$(CONFIG_IXP_PCI) += pci_ixp.o obj-$(CONFIG_SH4_PCI) += pci_sh4.o diff --git a/drivers/pci/pci_msc01.c b/drivers/pci/pci_msc01.c new file mode 100644 index 0000000000..284ffa09b6 --- /dev/null +++ b/drivers/pci/pci_msc01.c @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +struct msc01_pci_controller { + struct pci_controller hose; + void *base; +}; + +static inline struct msc01_pci_controller * +hose_to_msc01(struct pci_controller *hose) +{ + return container_of(hose, struct msc01_pci_controller, hose); +} + +static int msc01_config_access(struct msc01_pci_controller *msc01, + unsigned char access_type, pci_dev_t bdf, + int where, u32 *data) +{ + const u32 aborts = MSC01_PCI_INTSTAT_MA_MSK | MSC01_PCI_INTSTAT_TA_MSK; + void *intstat = msc01->base + MSC01_PCI_INTSTAT_OFS; + void *cfgdata = msc01->base + MSC01_PCI_CFGDATA_OFS; + unsigned int bus = PCI_BUS(bdf); + unsigned int dev = PCI_DEV(bdf); + unsigned int devfn = PCI_DEV(bdf) << 3 | PCI_FUNC(bdf); + + /* clear abort status */ + __raw_writel(aborts, intstat); + + /* setup address */ + __raw_writel((bus << MSC01_PCI_CFGADDR_BNUM_SHF) | + (dev << MSC01_PCI_CFGADDR_DNUM_SHF) | + (devfn << MSC01_PCI_CFGADDR_FNUM_SHF) | + ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF), + msc01->base + MSC01_PCI_CFGADDR_OFS); + + /* perform access */ + if (access_type == PCI_ACCESS_WRITE) + __raw_writel(*data, cfgdata); + else + *data = __raw_readl(cfgdata); + + /* check for aborts */ + if (__raw_readl(intstat) & aborts) { + /* clear abort status */ + __raw_writel(aborts, intstat); + return -1; + } + + return 0; +} + +static int msc01_read_config_dword(struct pci_controller *hose, pci_dev_t dev, + int where, u32 *value) +{ + struct msc01_pci_controller *msc01 = hose_to_msc01(hose); + + *value = 0xffffffff; + return msc01_config_access(msc01, PCI_ACCESS_READ, dev, where, value); +} + +static int msc01_write_config_dword(struct pci_controller *hose, pci_dev_t dev, + int where, u32 value) +{ + struct msc01_pci_controller *gt = hose_to_msc01(hose); + u32 data = value; + + return msc01_config_access(gt, PCI_ACCESS_WRITE, dev, where, &data); +} + +void msc01_pci_init(void *base, unsigned long sys_bus, unsigned long sys_phys, + unsigned long sys_size, unsigned long mem_bus, + unsigned long mem_phys, unsigned long mem_size, + unsigned long io_bus, unsigned long io_phys, + unsigned long io_size) +{ + static struct msc01_pci_controller global_msc01; + struct msc01_pci_controller *msc01; + struct pci_controller *hose; + + msc01 = &global_msc01; + msc01->base = base; + + hose = &msc01->hose; + + hose->first_busno = 0; + hose->last_busno = 0; + + /* System memory space */ + pci_set_region(&hose->regions[0], sys_bus, sys_phys, sys_size, + PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + + /* PCI memory space */ + pci_set_region(&hose->regions[1], mem_bus, mem_phys, mem_size, + PCI_REGION_MEM); + + /* PCI I/O space */ + pci_set_region(&hose->regions[2], io_bus, io_phys, io_size, + PCI_REGION_IO); + + hose->region_count = 3; + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + msc01_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + msc01_write_config_dword); + + pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); +} diff --git a/include/configs/malta.h b/include/configs/malta.h index d067d98782..5e322f6ba6 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -17,6 +17,7 @@ #define CONFIG_PCI #define CONFIG_PCI_GT64120 +#define CONFIG_PCI_MSC01 #define CONFIG_PCI_PNP #define CONFIG_PCNET @@ -76,7 +77,8 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK 115200 -#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_UART_BASE) +#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_GT_UART0_BASE) +#define CONFIG_SYS_NS16550_COM2 CKSEG1ADDR(MALTA_MSC01_UART0_BASE) #define CONFIG_CONS_INDEX 1 /* diff --git a/include/msc01.h b/include/msc01.h new file mode 100644 index 0000000000..37cf963f13 --- /dev/null +++ b/include/msc01.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MSC01_H__ +#define __MSC01_H__ + +/* + * Bus Interface Unit + */ + +#define MSC01_BIU_IP1BAS1L_OFS 0x0208 +#define MSC01_BIU_IP1MSK1L_OFS 0x0218 +#define MSC01_BIU_IP1BAS2L_OFS 0x0248 +#define MSC01_BIU_IP1MSK2L_OFS 0x0258 +#define MSC01_BIU_IP2BAS1L_OFS 0x0288 +#define MSC01_BIU_IP2MSK1L_OFS 0x0298 +#define MSC01_BIU_IP2BAS2L_OFS 0x02c8 +#define MSC01_BIU_IP2MSK2L_OFS 0x02d8 +#define MSC01_BIU_IP3BAS1L_OFS 0x0308 +#define MSC01_BIU_IP3MSK1L_OFS 0x0318 +#define MSC01_BIU_IP3BAS2L_OFS 0x0348 +#define MSC01_BIU_IP3MSK2L_OFS 0x0358 +#define MSC01_BIU_MCBAS1L_OFS 0x0388 +#define MSC01_BIU_MCMSK1L_OFS 0x0398 +#define MSC01_BIU_MCBAS2L_OFS 0x03c8 +#define MSC01_BIU_MCMSK2L_OFS 0x03d8 + +/* + * PCI Bridge + */ + +#define MSC01_PCI_SC2PMBASL_OFS 0x0208 +#define MSC01_PCI_SC2PMMSKL_OFS 0x0218 +#define MSC01_PCI_SC2PMMAPL_OFS 0x0228 +#define MSC01_PCI_SC2PIOBASL_OFS 0x0248 +#define MSC01_PCI_SC2PIOMSKL_OFS 0x0258 +#define MSC01_PCI_SC2PIOMAPL_OFS 0x0268 +#define MSC01_PCI_P2SCMSKL_OFS 0x0308 +#define MSC01_PCI_P2SCMAPL_OFS 0x0318 +#define MSC01_PCI_INTSTAT_OFS 0x0608 +#define MSC01_PCI_CFGADDR_OFS 0x0610 +#define MSC01_PCI_CFGDATA_OFS 0x0618 +#define MSC01_PCI_HEAD0_OFS 0x2000 +#define MSC01_PCI_HEAD1_OFS 0x2008 +#define MSC01_PCI_HEAD2_OFS 0x2010 +#define MSC01_PCI_HEAD3_OFS 0x2018 +#define MSC01_PCI_HEAD4_OFS 0x2020 +#define MSC01_PCI_HEAD5_OFS 0x2028 +#define MSC01_PCI_HEAD6_OFS 0x2030 +#define MSC01_PCI_HEAD7_OFS 0x2038 +#define MSC01_PCI_HEAD8_OFS 0x2040 +#define MSC01_PCI_HEAD9_OFS 0x2048 +#define MSC01_PCI_HEAD10_OFS 0x2050 +#define MSC01_PCI_HEAD11_OFS 0x2058 +#define MSC01_PCI_HEAD12_OFS 0x2060 +#define MSC01_PCI_HEAD13_OFS 0x2068 +#define MSC01_PCI_HEAD14_OFS 0x2070 +#define MSC01_PCI_HEAD15_OFS 0x2078 +#define MSC01_PCI_BAR0_OFS 0x2220 +#define MSC01_PCI_CFG_OFS 0x2380 +#define MSC01_PCI_SWAP_OFS 0x2388 + +#define MSC01_PCI_SC2PMMSKL_MSK_MSK 0xff000000 +#define MSC01_PCI_SC2PIOMSKL_MSK_MSK 0xff000000 + +#define MSC01_PCI_INTSTAT_TA_SHF 6 +#define MSC01_PCI_INTSTAT_TA_MSK (0x1 << MSC01_PCI_INTSTAT_TA_SHF) +#define MSC01_PCI_INTSTAT_MA_SHF 7 +#define MSC01_PCI_INTSTAT_MA_MSK (0x1 << MSC01_PCI_INTSTAT_MA_SHF) + +#define MSC01_PCI_CFGADDR_BNUM_SHF 16 +#define MSC01_PCI_CFGADDR_BNUM_MSK (0xff << MSC01_PCI_CFGADDR_BNUM_SHF) +#define MSC01_PCI_CFGADDR_DNUM_SHF 11 +#define MSC01_PCI_CFGADDR_DNUM_MSK (0x1f << MSC01_PCI_CFGADDR_DNUM_SHF) +#define MSC01_PCI_CFGADDR_FNUM_SHF 8 +#define MSC01_PCI_CFGADDR_FNUM_MSK (0x3 << MSC01_PCI_CFGADDR_FNUM_SHF) +#define MSC01_PCI_CFGADDR_RNUM_SHF 2 +#define MSC01_PCI_CFGADDR_RNUM_MSK (0x3f << MSC01_PCI_CFGADDR_RNUM_SHF) + +#define MSC01_PCI_HEAD0_VENDORID_SHF 0 +#define MSC01_PCI_HEAD0_DEVICEID_SHF 16 + +#define MSC01_PCI_HEAD2_REV_SHF 0 +#define MSC01_PCI_HEAD2_CLASS_SHF 16 + +#define MSC01_PCI_CFG_EN_SHF 15 +#define MSC01_PCI_CFG_EN_MSK (0x1 << MSC01_PCI_CFG_EN_SHF) +#define MSC01_PCI_CFG_G_SHF 16 +#define MSC01_PCI_CFG_G_MSK (0x1 << MSC01_PCI_CFG_G_SHF) +#define MSC01_PCI_CFG_RA_SHF 17 +#define MSC01_PCI_CFG_RA_MSK (0x1 << MSC01_PCI_CFG_RA_SHF) + +#define MSC01_PCI_SWAP_BAR0_BSWAP_SHF 0 +#define MSC01_PCI_SWAP_IO_BSWAP_SHF 18 + +/* + * Peripheral Bus Controller + */ + +#define MSC01_PBC_CLKCFG_OFS 0x0100 +#define MSC01_PBC_CS0CFG_OFS 0x0400 +#define MSC01_PBC_CS0TIM_OFS 0x0500 +#define MSC01_PBC_CS0RW_OFS 0x0600 + +#define MSC01_PBC_CLKCFG_SHF 0 +#define MSC01_PBC_CLKCFG_MSK (0x1f << MSC01_PBC_CLKCFG_SHF) + +#define MSC01_PBC_CS0CFG_WS_SHF 0 +#define MSC01_PBC_CS0CFG_WS_MSK (0x1f << MSC01_PBC_CS0CFG_WS_SHF) +#define MSC01_PBC_CS0CFG_WSIDLE_SHF 8 +#define MSC01_PBC_CS0CFG_WSIDLE_MSK (0x1f << MSC01_PBC_CS0CFG_WSIDLE_SHF) +#define MSC01_PBC_CS0CFG_DTYP_SHF 16 +#define MSC01_PBC_CS0CFG_DTYP_MSK (0x3 << MSC01_PBC_CS0CFG_DTYP_SHF) +#define MSC01_PBC_CS0CFG_ADM_SHF 20 +#define MSC01_PBC_CS0CFG_ADM_MSK (0x1 << MSC01_PBC_CS0CFG_ADM_SHF) + +#define MSC01_PBC_CS0TIM_CAT_SHF 0 +#define MSC01_PBC_CS0TIM_CAT_MSK (0x1f << MSC01_PBC_CS0TIM_CAT_SHF) +#define MSC01_PBC_CS0TIM_CDT_SHF 8 +#define MSC01_PBC_CS0TIM_CDT_MSK (0x1f << MSC01_PBC_CS0TIM_CDT_SHF) + +#define MSC01_PBC_CS0RW_WAT_SHF 0 +#define MSC01_PBC_CS0RW_WAT_MSK (0x1f << MSC01_PBC_CS0RW_WAT_SHF) +#define MSC01_PBC_CS0RW_WDT_SHF 8 +#define MSC01_PBC_CS0RW_WDT_MSK (0x1f << MSC01_PBC_CS0RW_WDT_SHF) +#define MSC01_PBC_CS0RW_RAT_SHF 16 +#define MSC01_PBC_CS0RW_RAT_MSK (0x1f << MSC01_PBC_CS0RW_RAT_SHF) +#define MSC01_PBC_CS0RW_RDT_SHF 24 +#define MSC01_PBC_CS0RW_RDT_MSK (0x1f << MSC01_PBC_CS0RW_RDT_SHF) + +#endif /* __MSC01_H__ */ diff --git a/include/pci_ids.h b/include/pci_ids.h index 2c6dfd4044..6bab677449 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -2170,6 +2170,9 @@ #define PCI_DEVICE_ID_ENE_720 0x1421 #define PCI_DEVICE_ID_ENE_722 0x1422 +#define PCI_VENDOR_ID_MIPS 0x153f +#define PCI_DEVICE_ID_MIPS_MSC01 0x0001 + #define PCI_SUBVENDOR_ID_PERLE 0x155f #define PCI_SUBDEVICE_ID_PCI_RAS4 0xf001 #define PCI_SUBDEVICE_ID_PCI_RAS8 0xf010 diff --git a/include/pci_msc01.h b/include/pci_msc01.h new file mode 100644 index 0000000000..54945a7a8f --- /dev/null +++ b/include/pci_msc01.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PCI_MSC01_H__ +#define __PCI_MSC01_H__ + +extern void msc01_pci_init(void *base, unsigned long sys_bus, + unsigned long sys_phys, unsigned long sys_size, + unsigned long mem_bus, unsigned long mem_phys, + unsigned long mem_size, unsigned long io_bus, + unsigned long io_phys, unsigned long io_size); + +#endif /* __PCI_MSC01_H__ */