From: Andrew Cameron Date: Sat, 26 Oct 2019 01:29:36 +0000 (-0500) Subject: ath79: add support for the TP-LINK CPE220 V3 X-Git-Tag: v21.02.0-rc1~4626 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bae0d47f2e36376d2876bc4d5557e3e11f80f2fb;p=openwrt%2Fstaging%2Fchunkeey.git ath79: add support for the TP-LINK CPE220 V3 This adds support for a popular low-cost 2.4GHz N based AP Specifications: SoC: Qualcomm Atheros QCA9533 (650MHz) RAM: 64MB Storage: 8 MB SPI NOR Wireless: 2.4GHz N based built into SoC 2x2 Ethernet: 2x 100/10 Mbps, integrated into SoC Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 This also applies some minor changes to the common DTSI: - use &wmac for label-mac-device, as this one is actually set up in common DTSI - move ð0 to parent DTSI - fix several leading spaces, added/removed newlines Signed-off-by: Andrew Cameron [DTS style fixes/improvements, updated commit message/title] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi index 5b273d4737..cb329a9a66 100644 --- a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi +++ b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi @@ -1,135 +1,15 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include -#include +#include "qca9533_tplink_cpexxx.dtsi" -#include "qca953x.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - label-mac-device = ð0; - }; - - leds { - compatible = "gpio-leds"; - - lan { - label = "tp-link:green:lan"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - link1 { - label = "tp-link:green:link1"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - }; - - link2 { - label = "tp-link:green:link2"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - - link3 { - label = "tp-link:green:link3"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - led_system: link4 { - label = "tp-link:green:link4"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset_button { - label = "Reset button"; - linux,code = ; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - uboot: partition@0 { - label = "u-boot"; - reg = <0x000000 0x020000>; - read-only; - }; - - partition@20000 { - label = "partition-table"; - reg = <0x020000 0x10000>; - read-only; - }; - - info: partition@30000 { - label = "info"; - reg = <0x030000 0x10000>; - read-only; - }; - - partition@40000 { - label = "firmware"; - reg = <0x040000 0x780000>; - compatible = "tplink,firmware"; - }; - - config: partition@7c0000 { - label = "config"; - reg = <0x7c0000 0x30000>; - read-only; - }; - - art: partition@7f0000 { - label = "art"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; +&leds { + lan { + label = "tp-link:green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; -ð0 { - status = "okay"; - phy-handle = <&swphy4>; - mtd-mac-address = <&info 0x8>; -}; - ð1 { compatible = "syscon", "simple-mfd"; }; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&info 0x8>; -}; diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts new file mode 100644 index 0000000000..dd90eb1c7d --- /dev/null +++ b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9533_tplink_cpexxx.dtsi" + +/ { + compatible = "tplink,cpe220-v3", "qca,qca9533"; + model = "TP-Link CPE220 v3"; +}; + +&leds { + lan0 { + label = "tp-link:green:lan0"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&info 0x8>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <0>; + switch-only-mode = <1>; + }; +}; diff --git a/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi new file mode 100644 index 0000000000..8f0a86334e --- /dev/null +++ b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca953x.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &led_link4; + led-failsafe = &led_link4; + led-running = &led_link4; + led-upgrade = &led_link4; + label-mac-device = &wmac; + }; + + leds: leds { + compatible = "gpio-leds"; + + link1 { + label = "tp-link:green:link1"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + link2 { + label = "tp-link:green:link2"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + link3 { + label = "tp-link:green:link3"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led_link4: link4 { + label = "tp-link:green:link4"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset_button { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "partition-table"; + reg = <0x020000 0x010000>; + read-only; + }; + + info: partition@30000 { + label = "info"; + reg = <0x030000 0x010000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x040000 0x780000>; + compatible = "tplink,firmware"; + }; + + config: partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x030000>; + read-only; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&info 0x8>; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + mtd-mac-address = <&info 0x8>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index fbb0d0ea03..de2c8e9197 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -173,6 +173,7 @@ tplink,archer-d50-v1) ;; tplink,cpe210-v1|\ tplink,cpe220-v2|\ +tplink,cpe220-v3|\ tplink,cpe510-v1|\ tplink,wbs210-v2) ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 10ca213e70..34f6e31047 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -89,6 +89,7 @@ ath79_setup_interfaces() comfast,cf-e314n-v2|\ tplink,cpe210-v1|\ tplink,cpe220-v2|\ + tplink,cpe220-v3|\ tplink,cpe510-v1|\ tplink,wbs210-v2|\ ubnt,nanostation-m|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches index 4d6277c223..04206f4a58 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches @@ -44,6 +44,7 @@ tplink,archer-c25-v1) ;; tplink,cpe210-v1|\ tplink,cpe220-v2|\ +tplink,cpe220-v3|\ tplink,cpe510-v1|\ tplink,wbs210-v2) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 69cb1719e6..a2b112a5ec 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -240,6 +240,18 @@ define Device/tplink_cpe220-v2 endef TARGET_DEVICES += tplink_cpe220-v2 +define Device/tplink_cpe220-v3 + $(Device/tplink-safeloader) + ATH_SOC := qca9533 + IMAGE_SIZE := 7680k + DEVICE_MODEL := CPE220 + DEVICE_VARIANT := v3 + DEVICE_PACKAGES := rssileds + TPLINK_BOARD_ID := CPE220V3 + LOADER_TYPE := elf +endef +TARGET_DEVICES += tplink_cpe220-v3 + define Device/tplink_cpe510-v1 $(Device/tplink-loader-okli) ATH_SOC := ar9344 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index ee0d20ae9f..3ec1fb6ce7 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -271,6 +271,47 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "support-list", }, + /** Firmware layout for the CPE220 V3 */ + { + .id = "CPE220V3", + .vendor = "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n", + .support_list = + "SupportList:\r\n" + "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n" + "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n" + "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n" + "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n" + "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n" + "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n" + "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n" + "CPE220(TP-LINK|UN|N300-2):3.0\r\n" + "CPE220(TP-LINK|EU|N300-2):3.0\r\n" + "CPE220(TP-LINK|US|N300-2):3.0\r\n", + .support_trail = '\xff', + .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"partition-table", 0x20000, 0x02000}, + {"default-mac", 0x30000, 0x00020}, + {"product-info", 0x31100, 0x00100}, + {"device-info", 0x31400, 0x00400}, + {"signature", 0x32000, 0x00400}, + {"device-id", 0x33000, 0x00100}, + {"firmware", 0x40000, 0x770000}, + {"soft-version", 0x7b0000, 0x00100}, + {"support-list", 0x7b1000, 0x01000}, + {"user-config", 0x7c0000, 0x10000}, + {"default-config", 0x7d0000, 0x10000}, + {"log", 0x7e0000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "support-list", + }, + /** Firmware layout for the CPE510/520 V1 */ { .id = "CPE510",