From: John Crispin Date: Thu, 18 May 2017 13:31:26 +0000 (+0200) Subject: Revert "ar71xx: Add support for Teltonika RUT900" X-Git-Tag: v18.06.0-rc1~2928 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bad2f9c4dc39ff8a8bdc7ad4bd86f2c068457a5a;p=openwrt%2Fstaging%2Fchunkeey.git Revert "ar71xx: Add support for Teltonika RUT900" This reverts commit 224e5f5efa22b8a0132522367afd3b22f05d53e1. pepe2k pointed out that this was not ready to merge Signed-off-by: John Crispin --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 0d0ebdcd6f..9cad8995db 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -423,9 +423,6 @@ get_status_led() { tl-wdr6500-v2) status_led="tp-link:white:system" ;; - tlt-rut900) - status_led="tlt:green:status" - ;; tube2h) status_led="alfa:green:signal4" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 8ee17f43c8..a751c64a3a 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -1154,9 +1154,6 @@ ar71xx_board_detect() { *"TL-WR941ND") name="tl-wr941nd" ;; - *"TLT-RUT900") - name="tlt-rut900" - ;; *"Tube2H") name="tube2h" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 1bc993450d..e246f35add 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -443,8 +443,7 @@ platform_check_image() { tl-wr941nd-v5|\ tl-wr941nd-v6|\ tl-wr940n-v4|\ - tl-wr941nd|\ - tlt-rut900) + tl-wr941nd) local magic_ver="0100" case "$board" in diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index b508248041..0a375862ba 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -207,7 +207,6 @@ CONFIG_ATH79_MACH_TL_WR841N_V9=y CONFIG_ATH79_MACH_TL_WR941ND=y CONFIG_ATH79_MACH_TL_WR941ND_V6=y CONFIG_ATH79_MACH_TL_WR940N_V4=y -CONFIG_ATH79_MACH_TLT_RUT900=y CONFIG_ATH79_MACH_TUBE2H=y CONFIG_ATH79_MACH_UBNT=y CONFIG_ATH79_MACH_UBNT_UNIFIAC=y @@ -390,7 +389,6 @@ CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_MTD_SPLIT_WRGG_FW=y CONFIG_MTD_SPLIT_MINOR_FW=y CONFIG_MTD_TPLINK_PARTS=y -CONFIG_MTD_TLT_PARTS=y CONFIG_MYLOADER=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_PER_CPU_KM=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 35dc916fca..9030954c27 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -2021,14 +2021,3 @@ config ATH79_MACH_TL_WPA8630 select ATH79_DEV_LEDS_GPIO select ATH79_DEV_M25P80 select ATH79_DEV_WMAC - -config ATH79_MACH_TLT_RUT900 - bool "Teltonika RUT900 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index e92aa6f4d8..2868adcaef 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -212,7 +212,6 @@ obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o obj-$(CONFIG_ATH79_MACH_TL_WR940N_V4) += mach-tl-wr940n-v4.o -obj-$(CONFIG_ATH79_MACH_TLT_RUT900) += mach-tlt-rut900.o obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC) += mach-ubnt-unifiac.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c deleted file mode 100644 index 0f53692a69..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * TELTONIKA TLT-RUT900 board support - * - * Copyright (C) 2014 Teltonika - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#include -#include -#include - -/* I2C interface */ -#define rut900_GPIO_SDA 17 -#define rut900_GPIO_SCK 16 - -#define RUT900_GPIO_LED_BAR0 48 -#define RUT900_GPIO_LED_BAR1 49 -#define RUT900_GPIO_LED_BAR2 50 -#define RUT900_GPIO_LED_BAR3 51 -#define RUT900_GPIO_LED_BAR4 52 -#define RUT900_GPIO_LED_ST_GRE 54 -#define RUT900_GPIO_LED_ST_RED 53 -//#define RUT900_GPIO_LED_WAN 18 -#define RUT900_GPIO_LED_LAN1 14 -#define RUT900_GPIO_LED_LAN2 13 -#define RUT900_GPIO_LED_LAN3 22 -#define RUT900_GPIO_LED_WAN 1 - -#define RUT900_GPIO_EXTERNAL_LNA0 2 -//#define RUT900_GPIO_EXTERNAL_LNA1 3 - -#define RUT900_GPIO_BTN_RESET 15 -#define RUT900_GPIO_BTN_EXPANDER 4 -#define RUT900_GPIO_BTN_TEST 58 -#define RUT900_GPIO_MMC_CS 3 - -//#define RUT900_GPIO_EXPANDER_POWER 11 - -#define RUT900_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RUT900_KEYS_DEBOUNCE_INTERVAL (3 * RUT900_KEYS_POLL_INTERVAL) -#define RUT900_KEYS_DEBOUNCE_INTERVAL_DIN 20 - -#define RUT900_MAC0_OFFSET 0 -#define RUT900_MAC1_OFFSET 6 -#define RUT900_WMAC_CALDATA_OFFSET 0x1000 -#define RUT900_PCIE_CALDATA_OFFSET 0x5000 - -static struct i2c_gpio_platform_data rut900_i2c_device_platdata = { - .sda_pin = rut900_GPIO_SDA, - .scl_pin = rut900_GPIO_SCK, - .udelay = 10, -}; - -static struct platform_device rut900_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = &rut900_i2c_device_platdata, - }, -}; - -static struct i2c_board_info rut900_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("pca9539", 0x74), - }, - { - I2C_BOARD_INFO("mcp3221", 0x4D), - }, -}; - -static void rut900_i2c_init(void) -{ - /* The gpio interface */ - platform_device_register(&rut900_i2c_device); - /* I2C devices */ - i2c_register_board_info(0, rut900_i2c_devs, ARRAY_SIZE(rut900_i2c_devs)); -} - -//Flash partitions are calcutated in drivers/mtd/tltpart.c -static const char *rut900_part_probes[] = { - "tlt", - NULL, -}; - -static struct flash_platform_data rut900_flash_data = { - .part_probes = rut900_part_probes, -}; - -static struct gpio_led rut900_leds_gpio[] __initdata = { - { - .name = "tlt:green:signal_bar0", - .gpio = RUT900_GPIO_LED_BAR0, - .active_low = 0, - }, - { - .name = "tlt:green:signal_bar1", - .gpio = RUT900_GPIO_LED_BAR1, - .active_low = 0, - }, - { - .name = "tlt:green:signal_bar2", - .gpio = RUT900_GPIO_LED_BAR2, - .active_low = 0, - }, - { - .name = "tlt:green:signal_bar3", - .gpio = RUT900_GPIO_LED_BAR3, - .active_low = 0, - }, - { - .name = "tlt:green:signal_bar4", - .gpio = RUT900_GPIO_LED_BAR4, - .active_low = 0, - }, - { - .name = "tlt:green:status", - .gpio = RUT900_GPIO_LED_ST_GRE, - .active_low = 0, - }, - { - .name = "tlt:red:status", - .gpio = RUT900_GPIO_LED_ST_RED, - .active_low = 0, - }, - -}; - -static struct gpio_keys_button rut900_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RUT900_KEYS_DEBOUNCE_INTERVAL, - .gpio = RUT900_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "Expander interrupt", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = RUT900_KEYS_DEBOUNCE_INTERVAL_DIN, - .gpio = RUT900_GPIO_BTN_EXPANDER, - }, -}; - -static struct spi_board_info ath79_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = &rut900_flash_data, - }, - { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "mmc_spi", - } -}; - -static struct ath79_spi_platform_data ath79_spi_data = { - .bus_num = 0, - .num_chipselect = 2, -}; - -static void __init rut900_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f020000); - u8 *art = (u8 *) KSEG1ADDR(0x1f030000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2); - ath79_register_leds_gpio(-1, ARRAY_SIZE(rut900_leds_gpio), - rut900_leds_gpio); - ath79_register_gpio_keys_polled(-1, RUT900_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rut900_gpio_keys), - rut900_gpio_keys); - - ath79_wmac_set_ext_lna_gpio(0, RUT900_GPIO_EXTERNAL_LNA0); - - ath79_init_mac(tmpmac, mac, 2); - ath79_register_wmac(art + RUT900_WMAC_CALDATA_OFFSET, tmpmac); - - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - /* LAN */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - - ath79_register_eth(1); - - /* WAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_register_eth(0); - - ath79_register_usb(); - - ath79_gpio_output_select(RUT900_GPIO_LED_LAN1, - AR934X_GPIO_OUT_LED_LINK3); - ath79_gpio_output_select(RUT900_GPIO_LED_LAN2, - AR934X_GPIO_OUT_LED_LINK2); - ath79_gpio_output_select(RUT900_GPIO_LED_LAN3, - AR934X_GPIO_OUT_LED_LINK1); - ath79_gpio_output_select(RUT900_GPIO_LED_WAN, - AR934X_GPIO_OUT_LED_LINK4); - - //SPI CS1 - ath79_gpio_output_select(RUT900_GPIO_MMC_CS, - 7); - - //HS UART - ath79_gpio_output_select(18, 79); - - /* Init I2C interface */ - rut900_i2c_init(); -} - -MIPS_MACHINE(ATH79_MACH_TLT_RUT900, "TLT-RUT900", - "TELTONIKA TLT-RUT900", - rut900_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 8aaa0a5c24..18033acd12 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -259,7 +259,6 @@ enum ath79_mach_type { ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */ ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */ ATH79_MACH_TL_WR940N_V4, /* TP-LINK TL-WR940N v4 */ - ATH79_MACH_TLT_RUT900, /* Teltonika RUT900 */ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */ ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */ diff --git a/target/linux/ar71xx/files/drivers/mtd/tltpart.c b/target/linux/ar71xx/files/drivers/mtd/tltpart.c deleted file mode 100644 index 92f558d778..0000000000 --- a/target/linux/ar71xx/files/drivers/mtd/tltpart.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include - -#include -#include - -#define TLT_NUM_PARTS 7 -#define TLT_HEADER_V1 0x01000000 -#define MD5SUM_LEN 16 - -#define TLT_UBOOT_LEN 0x20000 -#define TLT_CONFIG_LEN 0x10000 -#define TLT_ART_LEN 0x10000 -#define EVENTLOG_LEN 0x90000 - -struct tlt_fw_header { - uint32_t version; /* header version */ - char vendor_name[24]; - char fw_version[36]; - uint32_t hw_id; /* hardware id */ - uint32_t hw_rev; /* hardware revision */ - uint32_t unk1; - uint8_t md5sum1[MD5SUM_LEN]; - uint32_t unk2; - uint8_t md5sum2[MD5SUM_LEN]; - uint32_t unk3; - uint32_t kernel_la; /* kernel load address */ - uint32_t kernel_ep; /* kernel entry point */ - uint32_t fw_length; /* total length of the firmware */ - uint32_t kernel_ofs; /* kernel data offset */ - uint32_t kernel_len; /* kernel data length */ - uint32_t rootfs_ofs; /* rootfs data offset */ - uint32_t rootfs_len; /* rootfs data length */ - uint32_t boot_ofs; /* bootloader data offset */ - uint32_t boot_len; /* bootloader data length */ - uint8_t pad[360]; -} __attribute__ ((packed)); - -static struct tlt_fw_header * -tlt_read_header(struct mtd_info *mtd, size_t offset) -{ - struct tlt_fw_header *header; - size_t header_len; - size_t retlen; - int ret; - u32 t; - - header = vmalloc(sizeof(*header)); - if (!header) - goto err; - - header_len = sizeof(struct tlt_fw_header); - ret = mtd_read(mtd, offset, header_len, &retlen, - (unsigned char *) header); - if (ret) - goto err_free_header; - - if (retlen != header_len) - goto err_free_header; - - /* sanity checks */ - t = be32_to_cpu(header->version); - if (t != TLT_HEADER_V1) - goto err_free_header; - - t = be32_to_cpu(header->kernel_ofs); - if (t != header_len) - goto err_free_header; - - return header; - -err_free_header: - vfree(header); -err: - return NULL; -} - -static int tlt_check_rootfs_magic(struct mtd_info *mtd, size_t offset) -{ - u32 magic; - size_t retlen; - int ret; - - ret = mtd_read(mtd, offset, sizeof(magic), &retlen, - (unsigned char *) &magic); - if (ret) - return ret; - - if (retlen != sizeof(magic)) - return -EIO; - - if (le32_to_cpu(magic) != SQUASHFS_MAGIC && - magic != 0x19852003) - return -EINVAL; - - return 0; -} - -static int tlt_parse_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -{ - struct mtd_partition *parts; - struct tlt_fw_header *header; - int nr_parts; - size_t kernel_offset; - size_t rootfs_offset; - size_t squashfs_offset; - int ret; - - nr_parts = TLT_NUM_PARTS; - parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL); - if (!parts) { - ret = -ENOMEM; - goto err; - } - - kernel_offset = TLT_UBOOT_LEN + TLT_CONFIG_LEN + TLT_ART_LEN; - - header = tlt_read_header(master, kernel_offset); - if (!header) { - pr_notice("%s: no TP-Link header found\n", master->name); - ret = -ENODEV; - goto err_free_parts; - } - - squashfs_offset = kernel_offset + sizeof(struct tlt_fw_header) + - be32_to_cpu(header->kernel_len); - - ret = tlt_check_rootfs_magic(master, squashfs_offset); - if (ret == 0) - rootfs_offset = squashfs_offset; - else - rootfs_offset = kernel_offset + be32_to_cpu(header->rootfs_ofs); - - vfree(header); - - parts[0].name = "u-boot"; - parts[0].offset = 0; - parts[0].size = TLT_UBOOT_LEN; - parts[0].mask_flags = MTD_WRITEABLE; - - parts[1].name = "config"; - parts[1].offset = TLT_UBOOT_LEN; - parts[1].size = TLT_CONFIG_LEN; - - parts[2].name = "art"; - parts[2].offset = TLT_UBOOT_LEN + TLT_CONFIG_LEN; - parts[2].size = TLT_ART_LEN; - parts[2].mask_flags = MTD_WRITEABLE; - - parts[3].name = "kernel"; - parts[3].offset = kernel_offset; - parts[3].size = rootfs_offset - kernel_offset; - - parts[4].name = "rootfs"; - parts[4].offset = rootfs_offset; - parts[4].size = master->size - rootfs_offset - EVENTLOG_LEN; - - parts[5].name = "firmware"; - parts[5].offset = kernel_offset; - parts[5].size = master->size - kernel_offset - EVENTLOG_LEN; - - parts[6].name = "event-log"; - parts[6].offset = master->size - EVENTLOG_LEN; - parts[6].size = EVENTLOG_LEN; - - *pparts = parts; - return nr_parts; - -err_free_parts: - kfree(parts); -err: - *pparts = NULL; - return ret; -} - -static struct mtd_part_parser tlt_parser = { - .owner = THIS_MODULE, - .parse_fn = tlt_parse_partitions, - .name = "tlt", -}; - -static int __init tlt_parser_init(void) -{ - register_mtd_parser(&tlt_parser); - - return 0; -} - -module_init(tlt_parser_init); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Gabor Juhos "); diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index 49e87cfb99..6ddf05239d 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -1084,14 +1084,3 @@ define Device/tl-wa7210n-v2 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += tl-wa7210n-v2 - -define Device/tlt-rut900 - $(Device/tplink-16mlzma) - DEVICE_TITLE := Teltonika RUT900 - DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev - BOARDNAME := TLT-RUT900 - DEVICE_PROFILE := TLTRUT900 - TPLINK_HWID := 0x35000001 - CONSOLE := ttyS0,115200 -endef -TARGET_DEVICES += tlt-rut900 diff --git a/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch b/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch deleted file mode 100644 index da4e088471..0000000000 --- a/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -202,6 +202,12 @@ config MTD_TPLINK_PARTS - ---help--- - TBD. - -+config MTD_TLT_PARTS -+ tristate "Teltonika RUT900 partitioning support" -+ depends on ATH79 -+ ---help--- -+ Teltonika RUT900 partitioning support -+ - comment "User Modules And Translation Layers" - - # ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47 - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o - obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o -+obj-$(CONFIG_MTD_TLT_PARTS) += tltpart.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o