From: Hamish Guthrie Date: Mon, 28 May 2007 13:00:05 +0000 (+0000) Subject: First patches to get to .21 kernel X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=bab2982a68a4a58273a4edf3caf2accb2df36250;p=openwrt%2Fstaging%2Fjow.git First patches to get to .21 kernel SVN-Revision: 7365 --- diff --git a/target/linux/at91-2.6/config/default b/target/linux/at91-2.6/config/default index 79b053a47e..14a9b8c09a 100644 --- a/target/linux/at91-2.6/config/default +++ b/target/linux/at91-2.6/config/default @@ -1,12 +1,13 @@ # CONFIG_AEABI is not set CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APM is not set # CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91RM9200=y # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_ARCH_AT91SAM9260 is not set # CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CO285 is not set @@ -15,8 +16,11 @@ CONFIG_ARCH_AT91RM9200=y # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP2000 is not set @@ -25,6 +29,7 @@ CONFIG_ARCH_AT91RM9200=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set @@ -41,12 +46,13 @@ CONFIG_ARM_THUMB=y # CONFIG_ARTHUR is not set # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set CONFIG_AT91_SPI=y -CONFIG_AT91_SPIDEV=y -CONFIG_AT91_VLIO=y +# CONFIG_AT91_SPIDEV is not set +# CONFIG_ATMEL_TCLIB is not set # CONFIG_ATM_DUMMY is not set # CONFIG_ATM_TCP is not set CONFIG_BASE_SMALL=0 # CONFIG_BINFMT_AOUT is not set +CONFIG_BITREVERSE=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y @@ -55,6 +61,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BONDING is not set # CONFIG_BRIDGE_NETFILTER is not set +# CONFIG_BROADCOM_PHY is not set # CONFIG_BSD_DISKLABEL is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_BT is not set @@ -102,7 +109,6 @@ CONFIG_DAVICOM_PHY=y # CONFIG_DEBUG_USER is not set # CONFIG_DM9000 is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_FIRMWARE_EDID is not set # CONFIG_FIXED_PHY is not set # CONFIG_FPE_FASTFPE is not set CONFIG_FPE_NWFPE=y @@ -110,11 +116,15 @@ CONFIG_FPE_NWFPE=y CONFIG_FRAME_POINTER=y CONFIG_FS_POSIX_ACL=y # CONFIG_FW_LOADER is not set +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set CONFIG_HW_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_HZ=100 # CONFIG_I2C is not set # CONFIG_IEEE80211 is not set # CONFIG_IKCONFIG is not set @@ -136,9 +146,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_IP6_NF_TARGET_LOG is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set # CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set # CONFIG_IP_NF_TARGET_LOG is not set # CONFIG_IP_NF_TARGET_NETMAP is not set # CONFIG_IP_NF_TARGET_SAME is not set @@ -154,23 +162,22 @@ CONFIG_LEGACY_PTY_COUNT=32 # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_ATEB9200 is not set # CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_CHUB is not set # CONFIG_MACH_CSB337 is not set # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_KAFA is not set # CONFIG_MACH_KB9200 is not set # CONFIG_MACH_ONEARM is not set CONFIG_MACH_VLINK=y -CONFIG_MINI_FO=y CONFIG_MMC=m CONFIG_MMC_AT91=m CONFIG_MMC_BLOCK=m # CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_TIFM_SD is not set CONFIG_MTD=y # CONFIG_MTD_ABSENT is not set # CONFIG_MTD_AFS_PARTS is not set -CONFIG_MTD_AT91_DATAFLASH=y -CONFIG_MTD_AT91_PARTS=y +# CONFIG_MTD_AT91_DATAFLASH is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_MTD_BLOCK2MTD is not set # CONFIG_MTD_CFI is not set @@ -217,16 +224,17 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_NET_PKTGEN is not set # CONFIG_NET_RADIO is not set +CONFIG_NET_SCH_FIFO=y # CONFIG_NET_SCH_NETEM is not set # CONFIG_NEW_LEDS is not set # CONFIG_NO_IDLE_HZ is not set +# CONFIG_NO_IOPORT is not set # CONFIG_NTFS_FS is not set # CONFIG_NVRAM is not set -# CONFIG_PCCARD is not set +# CONFIG_OUTER_CACHE is not set CONFIG_PHYLIB=y -# CONFIG_PM is not set +# CONFIG_PNPACPI is not set # CONFIG_PPPOATM is not set -# CONFIG_PPPOL2TP is not set # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_SYNC_TTY is not set # CONFIG_QSEMI_PHY is not set @@ -247,6 +255,8 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SOUND is not set # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_UID16=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_USB is not set diff --git a/target/linux/at91-2.6/patches/000-at91patches.patch b/target/linux/at91-2.6/patches/000-at91patches.patch index a5581d2178..93fa2cf03c 100644 --- a/target/linux/at91-2.6/patches/000-at91patches.patch +++ b/target/linux/at91-2.6/patches/000-at91patches.patch @@ -1,2249 +1,112 @@ -diff -urN -x CVS linux-2.6.19-final/arch/arm/Kconfig linux-2.6.19/arch/arm/Kconfig ---- linux-2.6.19-final/arch/arm/Kconfig Mon Dec 4 16:39:27 2006 -+++ linux-2.6.19/arch/arm/Kconfig Thu Nov 30 09:08:02 2006 -@@ -583,7 +591,7 @@ - ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ - ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ - ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ -- ARCH_AT91RM9200 || MACH_TRIZEPS4 -+ ARCH_AT91 || MACH_TRIZEPS4 - help - If you say Y here, the LEDs on your machine will be used - to provide useful information about your current system status. -diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91rm9200dk_defconfig linux-2.6.19/arch/arm/configs/at91rm9200dk_defconfig ---- linux-2.6.19-final/arch/arm/configs/at91rm9200dk_defconfig Mon Dec 4 16:39:28 2006 -+++ linux-2.6.19/arch/arm/configs/at91rm9200dk_defconfig Mon Nov 20 10:46:02 2006 -@@ -357,9 +357,9 @@ - # - # CONFIG_MTD_COMPLEX_MAPPINGS is not set - CONFIG_MTD_PHYSMAP=y --CONFIG_MTD_PHYSMAP_START=0x10000000 --CONFIG_MTD_PHYSMAP_LEN=0x200000 --CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+CONFIG_MTD_PHYSMAP_START=0 -+CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=0 - # CONFIG_MTD_ARM_INTEGRATOR is not set - # CONFIG_MTD_IMPA7 is not set - # CONFIG_MTD_PLATRAM is not set -@@ -585,7 +585,9 @@ - # CONFIG_USBPCWATCHDOG is not set - # CONFIG_NVRAM is not set - # CONFIG_RTC is not set --CONFIG_AT91_RTC=y -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_DRV_AT91RM9200=y - # CONFIG_DTLK is not set - # CONFIG_R3964 is not set - -diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91rm9200ek_defconfig linux-2.6.19/arch/arm/configs/at91rm9200ek_defconfig ---- linux-2.6.19-final/arch/arm/configs/at91rm9200ek_defconfig Mon Dec 4 16:39:28 2006 -+++ linux-2.6.19/arch/arm/configs/at91rm9200ek_defconfig Mon Nov 20 10:45:49 2006 -@@ -348,9 +348,9 @@ - # - # CONFIG_MTD_COMPLEX_MAPPINGS is not set - CONFIG_MTD_PHYSMAP=y --CONFIG_MTD_PHYSMAP_START=0x10000000 --CONFIG_MTD_PHYSMAP_LEN=0x800000 --CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+CONFIG_MTD_PHYSMAP_START=0 -+CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=0 - # CONFIG_MTD_ARM_INTEGRATOR is not set - # CONFIG_MTD_IMPA7 is not set - # CONFIG_MTD_PLATRAM is not set -@@ -566,7 +566,9 @@ - # CONFIG_USBPCWATCHDOG is not set - # CONFIG_NVRAM is not set - # CONFIG_RTC is not set --CONFIG_AT91_RTC=y -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_DRV_AT91RM9200=y - # CONFIG_DTLK is not set - # CONFIG_R3964 is not set - -diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.19/arch/arm/configs/at91sam9260ek_defconfig ---- linux-2.6.19-final/arch/arm/configs/at91sam9260ek_defconfig Thu Jan 1 02:00:00 1970 -+++ linux-2.6.19/arch/arm/configs/at91sam9260ek_defconfig Mon Nov 20 10:51:08 2006 -@@ -0,0 +1,950 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.19-rc6 -+# Fri Nov 17 18:42:21 2006 -+# -+CONFIG_ARM=y -+# CONFIG_GENERIC_TIME is not set -+CONFIG_MMU=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+ -+# -+# General setup -+# -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+# CONFIG_SWAP is not set -+CONFIG_SYSVIPC=y -+# CONFIG_IPC_NS is not set -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_UTS_NS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+# CONFIG_RELAY is not set -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_EPOLL=y -+CONFIG_SHMEM=y -+CONFIG_SLAB=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+# CONFIG_SLOB is not set -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+ -+# -+# Block layer -+# -+CONFIG_BLOCK=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+# CONFIG_IOSCHED_DEADLINE is not set -+# CONFIG_IOSCHED_CFQ is not set -+CONFIG_DEFAULT_AS=y -+# CONFIG_DEFAULT_DEADLINE is not set -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="anticipatory" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_OMAP is not set -+ -+# -+# Atmel AT91 System-on-Chip -+# -+# CONFIG_ARCH_AT91RM9200 is not set -+CONFIG_ARCH_AT91SAM9260=y -+# CONFIG_ARCH_AT91SAM9261 is not set -+ -+# -+# AT91SAM9260 Board Type -+# -+CONFIG_MACH_AT91SAM9260EK=y -+ -+# -+# AT91 Board Options -+# -+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set -+ -+# -+# AT91 Feature Selections -+# -+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM926T=y -+CONFIG_CPU_32v5=y -+CONFIG_CPU_ABRT_EV5TJ=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+# CONFIG_ARM_THUMB is not set -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -+ -+# -+# Bus support -+# -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_PREEMPT is not set -+# CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=100 -+# CONFIG_AEABI is not set -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+# CONFIG_LEDS is not set -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -+# CONFIG_XIP_KERNEL is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+# CONFIG_VFP is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_ARTHUR is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+# CONFIG_APM is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+# CONFIG_NETDEBUG is not set -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+CONFIG_IP_PNP_BOOTP=y -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+CONFIG_INET_XFRM_MODE_TRANSPORT=y -+CONFIG_INET_XFRM_MODE_TUNNEL=y -+CONFIG_INET_XFRM_MODE_BEET=y -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+ -+# -+# DCCP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_DCCP is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+ -+# -+# TIPC Configuration (EXPERIMENTAL) -+# -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_IEEE80211 is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_SYS_HYPERVISOR is not set -+ -+# -+# Connector - unified userspace <-> kernelspace linker -+# -+# CONFIG_CONNECTOR is not set -+ -+# -+# Memory Technology Devices (MTD) -+# -+# CONFIG_MTD is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play support -+# -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_COW_COMMON is not set -+# CONFIG_BLK_DEV_LOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=8192 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+CONFIG_BLK_DEV_INITRD=y -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+# CONFIG_MD is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+ -+# -+# IEEE 1394 (FireWire) support -+# -+ -+# -+# I2O device support -+# -+ -+# -+# Network device support -+# -+# CONFIG_NETDEVICES is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_TSDEV is not set -+# CONFIG_INPUT_EVDEV is not set -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+ -+# -+# IPMI -+# -+# CONFIG_IPMI_HANDLER is not set -+ -+# -+# Watchdog Cards -+# -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+CONFIG_HW_RANDOM=y -+# CONFIG_NVRAM is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_RAW_DRIVER is not set -+ -+# -+# TPM devices -+# -+# CONFIG_TCG_TPM is not set -+ -+# -+# I2C support -+# -+# CONFIG_I2C is not set -+ -+# -+# SPI support -+# -+# CONFIG_SPI is not set -+# CONFIG_SPI_MASTER is not set -+ -+# -+# Dallas's 1-wire bus -+# -+# CONFIG_W1 is not set -+ -+# -+# Hardware Monitoring support -+# -+# CONFIG_HWMON is not set -+# CONFIG_HWMON_VID is not set -+ -+# -+# Misc devices -+# -+# CONFIG_TIFM_CORE is not set -+ -+# -+# LED devices -+# -+# CONFIG_NEW_LEDS is not set -+ -+# -+# LED drivers -+# -+ -+# -+# LED Triggers -+# -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+ -+# -+# Digital Video Broadcasting Devices -+# -+# CONFIG_DVB is not set -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+ -+# -+# USB support -+# -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_BANDWIDTH is not set -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+CONFIG_USB_STORAGE_DEBUG=y -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+# CONFIG_USB_LIBUSUAL is not set -+ -+# -+# USB Input Devices -+# -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+# CONFIG_USB_AIPTEK is not set -+# CONFIG_USB_WACOM is not set -+# CONFIG_USB_ACECAD is not set -+# CONFIG_USB_KBTAB is not set -+# CONFIG_USB_POWERMATE is not set -+# CONFIG_USB_TOUCHSCREEN is not set -+# CONFIG_USB_YEALINK is not set -+# CONFIG_USB_XPAD is not set -+# CONFIG_USB_ATI_REMOTE is not set -+# CONFIG_USB_ATI_REMOTE2 is not set -+# CONFIG_USB_KEYSPAN_REMOTE is not set -+# CONFIG_USB_APPLETOUCH is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET_MII is not set -+# CONFIG_USB_USBNET is not set -+CONFIG_USB_MON=y -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+CONFIG_USB_GADGET_AT91=y -+CONFIG_USB_AT91=y -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+CONFIG_USB_ZERO=m -+# CONFIG_USB_ETH is not set -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+ -+# -+# MMC/SD Card support -+# -+# CONFIG_MMC is not set -+ -+# -+# Real Time Clock -+# -+CONFIG_RTC_LIB=y -+# CONFIG_RTC_CLASS is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+# CONFIG_EXT3_FS is not set -+# CONFIG_EXT4DEV_FS is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+# CONFIG_MSDOS_FS is not set -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+# CONFIG_NFS_FS is not set -+# CONFIG_NFSD is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+# CONFIG_9P_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=y -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+# CONFIG_NLS_UTF8 is not set -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_MUST_CHECK=y -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_LOG_BUF_SHIFT=14 -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_DEBUG_SLAB is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_RWSEMS is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_HEADERS_CHECK is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+CONFIG_DEBUG_USER=y -+# CONFIG_DEBUG_WAITQ is not set -+# CONFIG_DEBUG_ERRORS is not set -+CONFIG_DEBUG_LL=y -+# CONFIG_DEBUG_ICEDCC is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+ -+# -+# Cryptographic options -+# -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+# CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set -+CONFIG_CRC32=y -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_PLIST=y -diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.19/arch/arm/configs/at91sam9261ek_defconfig ---- linux-2.6.19-final/arch/arm/configs/at91sam9261ek_defconfig Thu Jan 1 02:00:00 1970 -+++ linux-2.6.19/arch/arm/configs/at91sam9261ek_defconfig Mon Nov 20 10:51:08 2006 -@@ -0,0 +1,1106 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.19-rc6 -+# Fri Nov 17 18:00:38 2006 -+# -+CONFIG_ARM=y -+# CONFIG_GENERIC_TIME is not set -+CONFIG_MMU=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+ -+# -+# General setup -+# -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+# CONFIG_SWAP is not set -+CONFIG_SYSVIPC=y -+# CONFIG_IPC_NS is not set -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_UTS_NS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+# CONFIG_RELAY is not set -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_EPOLL=y -+CONFIG_SHMEM=y -+CONFIG_SLAB=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+# CONFIG_SLOB is not set -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+ -+# -+# Block layer -+# -+CONFIG_BLOCK=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+# CONFIG_IOSCHED_DEADLINE is not set -+# CONFIG_IOSCHED_CFQ is not set -+CONFIG_DEFAULT_AS=y -+# CONFIG_DEFAULT_DEADLINE is not set -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="anticipatory" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_OMAP is not set -+ -+# -+# Atmel AT91 System-on-Chip -+# -+# CONFIG_ARCH_AT91RM9200 is not set -+# CONFIG_ARCH_AT91SAM9260 is not set -+CONFIG_ARCH_AT91SAM9261=y -+ -+# -+# AT91SAM9261 Board Type -+# -+CONFIG_MACH_AT91SAM9261EK=y -+ -+# -+# AT91 Board Options -+# -+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set -+ -+# -+# AT91 Feature Selections -+# -+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM926T=y -+CONFIG_CPU_32v5=y -+CONFIG_CPU_ABRT_EV5TJ=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+# CONFIG_ARM_THUMB is not set -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -+ -+# -+# Bus support -+# -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_PREEMPT is not set -+# CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=100 -+# CONFIG_AEABI is not set -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+# CONFIG_LEDS is not set -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -+# CONFIG_XIP_KERNEL is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+# CONFIG_VFP is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_ARTHUR is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+# CONFIG_APM is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+# CONFIG_NETDEBUG is not set -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+CONFIG_IP_PNP_BOOTP=y -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+CONFIG_INET_XFRM_MODE_TRANSPORT=y -+CONFIG_INET_XFRM_MODE_TUNNEL=y -+CONFIG_INET_XFRM_MODE_BEET=y -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+ -+# -+# DCCP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_DCCP is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+ -+# -+# TIPC Configuration (EXPERIMENTAL) -+# -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_IEEE80211 is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_SYS_HYPERVISOR is not set -+ -+# -+# Connector - unified userspace <-> kernelspace linker -+# -+# CONFIG_CONNECTOR is not set -+ -+# -+# Memory Technology Devices (MTD) -+# -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+# CONFIG_MTD_CHAR is not set -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+# CONFIG_MTD_CFI is not set -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+# CONFIG_MTD_OBSOLETE_CHIPS is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+ -+# -+# NAND Flash Device Drivers -+# -+CONFIG_MTD_NAND=y -+# CONFIG_MTD_NAND_VERIFY_WRITE is not set -+# CONFIG_MTD_NAND_ECC_SMC is not set -+CONFIG_MTD_NAND_IDS=y -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+CONFIG_MTD_NAND_AT91=y -+# CONFIG_MTD_NAND_NANDSIM is not set -+ -+# -+# OneNAND Flash Device Drivers -+# -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play support -+# -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_COW_COMMON is not set -+# CONFIG_BLK_DEV_LOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=8192 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+CONFIG_BLK_DEV_INITRD=y -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+# CONFIG_MD is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+ -+# -+# IEEE 1394 (FireWire) support -+# -+ -+# -+# I2O device support -+# -+ -+# -+# Network device support -+# -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+ -+# -+# PHY device support -+# -+# CONFIG_PHYLIB is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_SMC91X is not set -+CONFIG_DM9000=y -+ -+# -+# Ethernet (1000 Mbit) -+# -+ -+# -+# Ethernet (10000 Mbit) -+# -+ -+# -+# Token Ring devices -+# -+ -+# -+# Wireless LAN (non-hamradio) -+# -+# CONFIG_NET_RADIO is not set -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_TSDEV is not set -+# CONFIG_INPUT_EVDEV is not set -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+ -+# -+# IPMI -+# -+# CONFIG_IPMI_HANDLER is not set -+ -+# -+# Watchdog Cards -+# -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+CONFIG_HW_RANDOM=y -+# CONFIG_NVRAM is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_RAW_DRIVER is not set -+ -+# -+# TPM devices -+# -+# CONFIG_TCG_TPM is not set -+ -+# -+# I2C support -+# -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_AT91=y -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_PCA is not set -+# CONFIG_I2C_PCA_ISA is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+# CONFIG_SPI is not set -+# CONFIG_SPI_MASTER is not set -+ -+# -+# Dallas's 1-wire bus -+# -+# CONFIG_W1 is not set -+ -+# -+# Hardware Monitoring support -+# -+# CONFIG_HWMON is not set -+# CONFIG_HWMON_VID is not set -+ -+# -+# Misc devices -+# -+# CONFIG_TIFM_CORE is not set -+ -+# -+# LED devices -+# -+# CONFIG_NEW_LEDS is not set -+ -+# -+# LED drivers -+# -+ -+# -+# LED Triggers -+# -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+ -+# -+# Digital Video Broadcasting Devices -+# -+# CONFIG_DVB is not set -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+ -+# -+# USB support -+# -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_BANDWIDTH is not set -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+CONFIG_USB_STORAGE_DEBUG=y -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+# CONFIG_USB_LIBUSUAL is not set -+ -+# -+# USB Input Devices -+# -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+# CONFIG_USB_AIPTEK is not set -+# CONFIG_USB_WACOM is not set -+# CONFIG_USB_ACECAD is not set -+# CONFIG_USB_KBTAB is not set -+# CONFIG_USB_POWERMATE is not set -+# CONFIG_USB_TOUCHSCREEN is not set -+# CONFIG_USB_YEALINK is not set -+# CONFIG_USB_XPAD is not set -+# CONFIG_USB_ATI_REMOTE is not set -+# CONFIG_USB_ATI_REMOTE2 is not set -+# CONFIG_USB_KEYSPAN_REMOTE is not set -+# CONFIG_USB_APPLETOUCH is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET_MII is not set -+# CONFIG_USB_USBNET is not set -+CONFIG_USB_MON=y -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+CONFIG_USB_GADGET_AT91=y -+CONFIG_USB_AT91=y -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+CONFIG_USB_ZERO=m -+# CONFIG_USB_ETH is not set -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+ -+# -+# MMC/SD Card support -+# -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_AT91=m -+# CONFIG_MMC_TIFM_SD is not set -+ -+# -+# Real Time Clock -+# -+CONFIG_RTC_LIB=y -+# CONFIG_RTC_CLASS is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+# CONFIG_EXT3_FS is not set -+# CONFIG_EXT4DEV_FS is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+# CONFIG_MSDOS_FS is not set -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+# CONFIG_JFFS_FS is not set -+# CONFIG_JFFS2_FS is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+# CONFIG_NFS_FS is not set -+# CONFIG_NFSD is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+# CONFIG_9P_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=y -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+# CONFIG_NLS_UTF8 is not set -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_MUST_CHECK=y -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_LOG_BUF_SHIFT=14 -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_DEBUG_SLAB is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_RWSEMS is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_HEADERS_CHECK is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+CONFIG_DEBUG_USER=y -+# CONFIG_DEBUG_WAITQ is not set -+# CONFIG_DEBUG_ERRORS is not set -+CONFIG_DEBUG_LL=y -+# CONFIG_DEBUG_ICEDCC is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+ -+# -+# Cryptographic options -+# -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+# CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set -+CONFIG_CRC32=y -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_PLIST=y -diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/carmeva_defconfig linux-2.6.19/arch/arm/configs/carmeva_defconfig ---- linux-2.6.19-final/arch/arm/configs/carmeva_defconfig Mon Dec 4 16:39:29 2006 -+++ linux-2.6.19/arch/arm/configs/carmeva_defconfig Thu Oct 12 17:07:38 2006 -@@ -474,7 +474,7 @@ - # CONFIG_WATCHDOG is not set - # CONFIG_NVRAM is not set - # CONFIG_RTC is not set --# CONFIG_AT91_RTC is not set -+# CONFIG_AT91RM9200_RTC is not set - # CONFIG_DTLK is not set - # CONFIG_R3964 is not set - -diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/csb637_defconfig linux-2.6.19/arch/arm/configs/csb637_defconfig ---- linux-2.6.19-final/arch/arm/configs/csb637_defconfig Mon Dec 4 16:39:29 2006 -+++ linux-2.6.19/arch/arm/configs/csb637_defconfig Thu Oct 12 17:07:38 2006 -@@ -623,7 +623,7 @@ - # CONFIG_USBPCWATCHDOG is not set - # CONFIG_NVRAM is not set - CONFIG_RTC=y --# CONFIG_AT91_RTC is not set -+# CONFIG_AT91RM9200_RTC is not set - # CONFIG_DTLK is not set - # CONFIG_R3964 is not set - -diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/kb9202_defconfig linux-2.6.19/arch/arm/configs/kb9202_defconfig ---- linux-2.6.19-final/arch/arm/configs/kb9202_defconfig Mon Dec 4 16:39:29 2006 -+++ linux-2.6.19/arch/arm/configs/kb9202_defconfig Thu Oct 12 17:07:38 2006 -@@ -437,7 +437,7 @@ - # CONFIG_WATCHDOG is not set - # CONFIG_NVRAM is not set - # CONFIG_RTC is not set --# CONFIG_AT91_RTC is not set -+# CONFIG_AT91RM9200_RTC is not set - # CONFIG_DTLK is not set - # CONFIG_R3964 is not set - -diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/Kconfig linux-2.6.19/arch/arm/mach-at91rm9200/Kconfig ---- linux-2.6.19-final/arch/arm/mach-at91rm9200/Kconfig Mon Dec 4 16:32:44 2006 -+++ linux-2.6.19/arch/arm/mach-at91rm9200/Kconfig Wed Nov 22 09:24:11 2006 -@@ -2,7 +2,8 @@ - - menu "Atmel AT91 System-on-Chip" - --comment "Atmel AT91 Processors" -+choice -+ prompt "Atmel AT91 Processor" +diff -urN -x CVS linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S +--- linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S Tue May 8 12:13:30 2007 +@@ -67,6 +67,12 @@ + cmp r7, r3 + beq 99f + ++ @ Promwad Chub : 1181 ++ mov r3, #(MACH_TYPE_CHUB & 0xff) ++ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00) ++ cmp r7, r3 ++ beq 99f ++ + @ Unknown board, use the AT91RM9200DK board + @ mov r7, #MACH_TYPE_AT91RM9200 + mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Kconfig linux-2.6-stable/arch/arm/mach-at91/Kconfig +--- linux-2.6.21/arch/arm/mach-at91/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/Kconfig Wed May 9 10:20:54 2007 +@@ -17,6 +17,9 @@ + config ARCH_AT91SAM9263 + bool "AT91SAM9263" + ++config ARCH_AT91SAM9RL ++ bool "AT91SAM9RL" ++ + endchoice - config ARCH_AT91RM9200 - bool "AT91RM9200" -@@ -13,6 +14,8 @@ - config ARCH_AT91SAM9261 - bool "AT91SAM9261" - -+endchoice -+ # ---------------------------------------------------------- +@@ -87,6 +90,12 @@ + help + Select this if you are using Sperry-Sun's KAFA board. - if ARCH_AT91RM9200 -@@ -33,7 +36,6 @@ - Select this if you are using Atmel's AT91RM9200-DK Development board. - (Discontinued) - -- - config MACH_AT91RM9200EK - bool "Atmel AT91RM9200-EK Evaluation Kit" - depends on ARCH_AT91RM9200 -@@ -90,6 +92,13 @@ ++config MACH_CHUB ++ bool "Promwad Chub board" ++ depends on ARCH_AT91RM9200 ++ help ++ Select this if you are using Promwad's Chub board. ++ + endif - comment "AT91SAM9260 Board Type" + # ---------------------------------------------------------- +@@ -111,6 +120,13 @@ + Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit + -+config MACH_AT91SAM9260EK -+ bool "Atmel AT91SAM9260-EK Evaluation Kit" ++config MACH_CAM60 ++ bool "KwikByte CAM60 board" + depends on ARCH_AT91SAM9260 + help -+ Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit. -+ ++ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260. ++ + endif # ---------------------------------------------------------- -@@ -98,8 +107,31 @@ +@@ -145,6 +161,20 @@ - comment "AT91SAM9261 Board Type" + # ---------------------------------------------------------- -+config MACH_AT91SAM9261EK -+ bool "Atmel AT91SAM9261-EK Evaluation Kit" -+ depends on ARCH_AT91SAM9261 ++if ARCH_AT91SAM9RL ++ ++comment "AT91SAM9RL Board Type" ++ ++config MACH_AT91SAM9RLEK ++ bool "Atmel AT91SAM9RL-EK Evaluation Kit" ++ depends on ARCH_AT91SAM9RL + help -+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. -+ ++ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. + - endif - -+# ---------------------------------------------------------- ++endif + -+comment "AT91 Board Options" ++# ---------------------------------------------------------- + -+config MTD_AT91_DATAFLASH_CARD -+ bool "Enable DataFlash Card support" -+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK) + comment "AT91 Board Options" + + config MTD_AT91_DATAFLASH_CARD +@@ -160,6 +190,20 @@ + On AT91SAM926x boards both types of NAND flash can be present + (8 and 16 bit data bus width). + ++config CSB300_WAKE_SW0 ++ bool "CSB300 SW0 irq0 wakeup" ++ depends on MACH_CSB337 && PM + help -+ Enable support for the DataFlash card. ++ If you have a CSB300 connected to your CSB337, this lets ++ SW0 serve as a wakeup button. It uses IRQ0. + -+config MTD_NAND_AT91_BUSWIDTH_16 -+ bool "Enable 16-bit data bus interface to NAND flash" -+ depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK) ++config CSB300_WAKE_SW1 ++ bool "CSB300 SW1 gpio wakeup" ++ depends on MACH_CSB337 && PM + help -+ On AT91SAM926x boards both types of NAND flash can be present -+ (8 and 16 bit data bus width). - ++ If you have a CSB300 connected to your CSB337, this lets ++ SW1 serve as a wakeup button. It uses GPIO. ++ # ---------------------------------------------------------- -@@ -111,6 +143,13 @@ + comment "AT91 Feature Selections" +@@ -170,6 +214,20 @@ Select this if you need to program one or more of the PCK0..PCK3 programmable clock outputs. ++config ATMEL_TCLIB ++ bool "Timer/Counter Library" ++ help ++ Select this if you want a library to allocate the Timer/Counter ++ blocks found on many Atmel processors. This facilitates using ++ these modules despite processor differences. ++ +config AT91_SLOW_CLOCK + bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)" + depends on PM && EXPERIMENTAL @@ -2254,47 +117,52 @@ diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/Kconfig linux-2.6.1 endmenu endif -diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/Makefile linux-2.6.19/arch/arm/mach-at91rm9200/Makefile ---- linux-2.6.19-final/arch/arm/mach-at91rm9200/Makefile Mon Dec 4 16:32:44 2006 -+++ linux-2.6.19/arch/arm/mach-at91rm9200/Makefile Thu Nov 16 11:45:54 2006 -@@ -2,19 +2,20 @@ - # Makefile for the linux kernel. - # - --obj-y := clock.o irq.o gpio.o devices.o -+obj-y := clock.o irq.o gpio.o - obj-m := - obj-n := +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Makefile linux-2.6-stable/arch/arm/mach-at91/Makefile +--- linux-2.6.21/arch/arm/mach-at91/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/Makefile Wed May 9 12:37:19 2007 +@@ -8,12 +8,15 @@ obj- := obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o ++obj-$(CONFIG_ATMEL_TCLIB) += tclib.o # CPU-specific support --obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o --obj-$(CONFIG_ARCH_AT91SAM9260) += --obj-$(CONFIG_ARCH_AT91SAM9261) += -+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o -+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o -+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o + obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o + obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o + obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o + obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o ++obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o --# AT91RM9200 Board-specific support -+# AT91RM9200 board-specific support + # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o - obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o - obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o -@@ -26,8 +27,10 @@ +@@ -25,9 +28,11 @@ + obj-$(CONFIG_MACH_KB9200) += board-kb9202.o + obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o ++obj-$(CONFIG_MACH_CHUB) += board-chub.o # AT91SAM9260 board-specific support -+obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o + obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o ++obj-$(CONFIG_MACH_CAM60) += board-cam60.o # AT91SAM9261 board-specific support -+obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o + obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o +@@ -35,9 +40,13 @@ + # AT91SAM9263 board-specific support + obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o ++# AT91SAM9RL board-specific support ++obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o ++ # LEDs support led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o -@@ -39,7 +42,7 @@ + led-$(CONFIG_MACH_AT91RM9200EK) += leds.o ++led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o + led-$(CONFIG_MACH_CSB337) += leds.o + led-$(CONFIG_MACH_CSB637) += leds.o + led-$(CONFIG_MACH_KB9200) += leds.o +@@ -45,7 +54,7 @@ obj-$(CONFIG_LEDS) += $(led-y) # VGA support @@ -2303,693 +171,921 @@ diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/Makefile linux-2.6. ifeq ($(CONFIG_PM_DEBUG),y) -diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200.c linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200.c ---- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200.c Mon Dec 4 16:39:29 2006 -+++ linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200.c Fri Nov 3 19:22:15 2006 -@@ -14,8 +14,10 @@ - - #include - #include -+#include -+#include -+#include - --#include - #include "generic.h" - #include "clock.h" - -@@ -26,32 +28,12 @@ - .length = SZ_4K, - .type = MT_DEVICE, - }, { -- .virtual = AT91_VA_BASE_SPI, -- .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI), -- .length = SZ_16K, -- .type = MT_DEVICE, -- }, { - .virtual = AT91_VA_BASE_EMAC, - .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), - .length = SZ_16K, - .type = MT_DEVICE, - }, { -- .virtual = AT91_VA_BASE_TWI, -- .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI), -- .length = SZ_16K, -- .type = MT_DEVICE, -- }, { -- .virtual = AT91_VA_BASE_MCI, -- .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI), -- .length = SZ_16K, -- .type = MT_DEVICE, -- }, { -- .virtual = AT91_VA_BASE_UDP, -- .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP), -- .length = SZ_16K, -- .type = MT_DEVICE, -- }, { -- .virtual = AT91_SRAM_VIRT_BASE, -+ .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), - .length = AT91RM9200_SRAM_SIZE, - .type = MT_DEVICE, -@@ -222,6 +204,16 @@ - } +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c +--- linux-2.6.21/arch/arm/mach-at91/at91rm9200.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c Tue May 8 12:13:30 2007 +@@ -117,6 +117,21 @@ + .pmc_mask = 1 << AT91RM9200_ID_PIOD, + .type = CLK_TYPE_PERIPHERAL, }; ++static struct clk ssc0_clk = { ++ .name = "ssc0_clk", ++ .pmc_mask = 1 << AT91RM9200_ID_SSC0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc1_clk = { ++ .name = "ssc1_clk", ++ .pmc_mask = 1 << AT91RM9200_ID_SSC1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc2_clk = { ++ .name = "ssc2_clk", ++ .pmc_mask = 1 << AT91RM9200_ID_SSC2, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91RM9200_ID_TC0, +@@ -161,7 +176,9 @@ + &udc_clk, + &twi_clk, + &spi_clk, +- // ssc 0 .. ssc2 ++ &ssc0_clk, ++ &ssc1_clk, ++ &ssc2_clk, + &tc0_clk, + &tc1_clk, + &tc2_clk, +@@ -250,6 +267,33 @@ -+static void at91rm9200_reset(void) -+{ -+ /* -+ * Perform a hardware reset with the use of the Watchdog timer. -+ */ -+ at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); -+ at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); -+} -+ -+ - /* -------------------------------------------------------------------- - * AT91RM9200 processor initialization - * -------------------------------------------------------------------- */ -@@ -230,6 +222,12 @@ - /* Map peripherals */ - iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); - -+ at91_arch_reset = at91rm9200_reset; -+ at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) -+ | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) -+ | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) -+ | (1 << AT91RM9200_ID_IRQ6); -+ - /* Init clock subsystem */ - at91_clock_init(main_clock); -diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_devices.c ---- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_devices.c Thu Jan 1 02:00:00 1970 -+++ linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_devices.c Fri Dec 1 16:10:47 2006 -@@ -0,0 +1,901 @@ -+/* -+ * arch/arm/mach-at91rm9200/at91rm9200_devices.c -+ * -+ * Copyright (C) 2005 Thibaut VARENE -+ * Copyright (C) 2005 David Brownell -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "generic.h" -+ -+#define SZ_512 0x00000200 -+#define SZ_256 0x00000100 -+#define SZ_16 0x00000010 -+ -+/* -------------------------------------------------------------------- -+ * USB Host + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization + * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB + -+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -+static u64 ohci_dmamask = 0xffffffffUL; -+static struct at91_usbh_data usbh_data; ++#include "tclib.h" + -+static struct resource usbh_resources[] = { ++static struct atmel_tcblock at91rm9200_tcblocks[] = { + [0] = { -+ .start = AT91RM9200_UHP_BASE, -+ .end = AT91RM9200_UHP_BASE + SZ_1M - 1, -+ .flags = IORESOURCE_MEM, ++ .physaddr = AT91RM9200_BASE_TCB0, ++ .irq = { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, + }, + [1] = { -+ .start = AT91RM9200_ID_UHP, -+ .end = AT91RM9200_ID_UHP, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91rm9200_usbh_device = { -+ .name = "at91_ohci", -+ .id = -1, -+ .dev = { -+ .dma_mask = &ohci_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ .platform_data = &usbh_data, ++ .physaddr = AT91RM9200_BASE_TCB1, ++ .irq = { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 }, ++ .clk = { &tc3_clk, &tc4_clk, &tc5_clk }, + }, -+ .resource = usbh_resources, -+ .num_resources = ARRAY_SIZE(usbh_resources), +}; + -+void __init at91_add_device_usbh(struct at91_usbh_data *data) -+{ -+ if (!data) -+ return; ++#define at91rm9200_tc_init() atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks)) + -+ usbh_data = *data; -+ platform_device_register(&at91rm9200_usbh_device); -+} +#else -+void __init at91_add_device_usbh(struct at91_usbh_data *data) {} ++#define at91rm9200_tc_init() do {} while(0) +#endif + + +/* -------------------------------------------------------------------- -+ * USB Device (Gadget) -+ * -------------------------------------------------------------------- */ + * AT91RM9200 processor initialization + * -------------------------------------------------------------------- */ + void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +@@ -271,6 +315,9 @@ + + /* Initialize GPIO subsystem */ + at91_gpio_init(at91rm9200_gpio, banks); + -+#ifdef CONFIG_USB_GADGET_AT91 -+static struct at91_udc_data udc_data; ++ /* Initialize the Timer/Counter blocks */ ++ at91rm9200_tc_init(); + } + + +@@ -284,28 +331,28 @@ + static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ +- 0, /* Parallel IO Controller D */ +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ +- 6, /* USART 3 */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller D */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ ++ 5, /* USART 3 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface */ +- 5, /* Serial Synchronous Controller 0 */ +- 5, /* Serial Synchronous Controller 1 */ +- 5, /* Serial Synchronous Controller 2 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 4, /* Serial Synchronous Controller 2 */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* Ethernet MAC */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c +--- linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c Tue May 8 12:13:30 2007 +@@ -480,7 +480,18 @@ + * SPI + * -------------------------------------------------------------------- */ + +-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) ++#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */ ++#define SPI_DEVNAME "at91_spi" + -+static struct resource udc_resources[] = { -+ [0] = { -+ .start = AT91RM9200_BASE_UDP, -+ .end = AT91RM9200_BASE_UDP + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91RM9200_ID_UDP, -+ .end = AT91RM9200_ID_UDP, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; ++#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */ ++#define SPI_DEVNAME "at91_spi" ++ ++#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */ ++#define SPI_DEVNAME "atmel_spi" ++ ++#endif ++ ++#ifdef SPI_DEVNAME + static u64 spi_dmamask = 0xffffffffUL; + + static struct resource spi_resources[] = { +@@ -497,7 +508,7 @@ + }; + + static struct platform_device at91rm9200_spi_device = { +- .name = "at91_spi", ++ .name = SPI_DEVNAME, + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, +@@ -606,6 +617,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) + -+static struct platform_device at91rm9200_udc_device = { -+ .name = "at91_udc", ++static struct platform_device at91_leds = { ++ .name = "at91_leds", + .id = -1, -+ .dev = { -+ .platform_data = &udc_data, -+ }, -+ .resource = udc_resources, -+ .num_resources = ARRAY_SIZE(udc_resources), +}; + -+void __init at91_add_device_udc(struct at91_udc_data *data) ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) +{ -+ if (!data) ++ if (!nr) + return; + -+ if (data->vbus_pin) { -+ at91_set_gpio_input(data->vbus_pin, 0); -+ at91_set_deglitch(data->vbus_pin, 1); ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); + } -+ if (data->pullup_pin) -+ at91_set_gpio_output(data->pullup_pin, 0); + -+ udc_data = *data; -+ platform_device_register(&at91rm9200_udc_device); ++ platform_device_register(&at91_leds); +} +#else -+void __init at91_add_device_udc(struct at91_udc_data *data) {} ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} +#endif + + -+/* -------------------------------------------------------------------- -+ * Ethernet + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9260.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c Tue May 8 12:13:30 2007 +@@ -119,6 +119,11 @@ + .pmc_mask = 1 << AT91SAM9260_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk ssc_clk = { ++ .name = "ssc_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_SSC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TC0, +@@ -193,7 +198,7 @@ + &twi_clk, + &spi0_clk, + &spi1_clk, +- // ssc ++ &ssc_clk, + &tc0_clk, + &tc1_clk, + &tc2_clk, +@@ -264,6 +269,33 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization + * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB + -+#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) -+static u64 eth_dmamask = 0xffffffffUL; -+static struct eth_platform_data eth_data; ++#include "tclib.h" + -+static struct resource eth_resources[] = { ++static struct atmel_tcblock at91sam9260_tcblocks[] = { + [0] = { -+ .start = AT91_VA_BASE_EMAC, -+ .end = AT91_VA_BASE_EMAC + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, ++ .physaddr = AT91SAM9260_BASE_TCB0, ++ .irq = { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, + }, + [1] = { -+ .start = AT91RM9200_ID_EMAC, -+ .end = AT91RM9200_ID_EMAC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91rm9200_eth_device = { -+ .name = "at91_ether", -+ .id = -1, -+ .dev = { -+ .dma_mask = ð_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ .platform_data = ð_data, ++ .physaddr = AT91SAM9260_BASE_TCB1, ++ .irq = { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 }, ++ .clk = { &tc3_clk, &tc4_clk, &tc5_clk }, + }, -+ .resource = eth_resources, -+ .num_resources = ARRAY_SIZE(eth_resources), +}; + -+void __init at91_add_device_eth(struct eth_platform_data *data) -+{ -+ if (!data) -+ return; -+ -+ if (data->phy_irq_pin) { -+ at91_set_gpio_input(data->phy_irq_pin, 0); -+ at91_set_deglitch(data->phy_irq_pin, 1); -+ } -+ -+ /* Pins used for MII and RMII */ -+ at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */ -+ at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */ -+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */ -+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ -+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ -+ at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */ -+ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */ -+ at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */ -+ at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */ -+ at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */ -+ -+ if (!data->is_rmii) { -+ at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */ -+ at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */ -+ at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */ -+ at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */ -+ at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */ -+ at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */ -+ at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */ -+ at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */ -+ } ++#define at91sam9260_tc_init() atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks)) + -+ eth_data = *data; -+ platform_device_register(&at91rm9200_eth_device); -+} +#else -+void __init at91_add_device_eth(struct eth_platform_data *data) {} ++#define at91sam9260_tc_init() do {} while(0) +#endif + + +/* -------------------------------------------------------------------- -+ * Compact Flash / PCMCIA -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) -+static struct at91_cf_data cf_data; -+ -+#define CF_BASE AT91_CHIPSELECT_4 + * AT91SAM9260 processor initialization + * -------------------------------------------------------------------- */ + +@@ -310,6 +342,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9260_gpio, 3); + -+static struct resource cf_resources[] = { -+ [0] = { -+ .start = CF_BASE, -+ /* ties up CS4, CS5 and CS6 */ -+ .end = CF_BASE + (0x30000000 - 1), -+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, -+ }, -+}; ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9260_tc_init(); + } + + /* -------------------------------------------------------------------- +@@ -322,30 +357,30 @@ + static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ + 0, /* Analog-to-Digital Converter */ +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface 0 */ +- 6, /* Serial Peripheral Interface 1 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface 0 */ ++ 5, /* Serial Peripheral Interface 1 */ + 5, /* Serial Synchronous Controller */ + 0, + 0, + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* Ethernet */ + 0, /* Image Sensor Interface */ +- 6, /* USART 3 */ +- 6, /* USART 4 */ +- 6, /* USART 5 */ ++ 5, /* USART 3 */ ++ 5, /* USART 4 */ ++ 5, /* USART 5 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c Tue May 8 12:13:30 2007 +@@ -527,6 +527,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) + -+static struct platform_device at91rm9200_cf_device = { -+ .name = "at91_cf", ++static struct platform_device at91_leds = { ++ .name = "at91_leds", + .id = -1, -+ .dev = { -+ .platform_data = &cf_data, -+ }, -+ .resource = cf_resources, -+ .num_resources = ARRAY_SIZE(cf_resources), +}; + -+void __init at91_add_device_cf(struct at91_cf_data *data) ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) +{ -+ unsigned int csa; -+ -+ if (!data) ++ if (!nr) + return; + -+ data->chipselect = 4; /* can only use EBI ChipSelect 4 */ -+ -+ /* CF takes over CS4, CS5, CS6 */ -+ csa = at91_sys_read(AT91_EBI_CSA); -+ at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); -+ -+ /* -+ * Static memory controller timing adjustments. -+ * REVISIT: these timings are in terms of MCK cycles, so -+ * when MCK changes (cpufreq etc) so must these values... -+ */ -+ at91_sys_write(AT91_SMC_CSR(4), -+ AT91_SMC_ACSS_STD -+ | AT91_SMC_DBW_16 -+ | AT91_SMC_BAT -+ | AT91_SMC_WSEN -+ | AT91_SMC_NWS_(32) /* wait states */ -+ | AT91_SMC_RWSETUP_(6) /* setup time */ -+ | AT91_SMC_RWHOLD_(4) /* hold time */ -+ ); ++ at91_leds.dev.platform_data = leds; + -+ /* input/irq */ -+ if (data->irq_pin) { -+ at91_set_gpio_input(data->irq_pin, 1); -+ at91_set_deglitch(data->irq_pin, 1); ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); + } -+ at91_set_gpio_input(data->det_pin, 1); -+ at91_set_deglitch(data->det_pin, 1); -+ -+ /* outputs, initially off */ -+ if (data->vcc_pin) -+ at91_set_gpio_output(data->vcc_pin, 0); -+ at91_set_gpio_output(data->rst_pin, 0); -+ -+ /* force poweron defaults for these pins ... */ -+ at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */ -+ at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */ -+ at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */ -+ at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */ + -+ /* nWAIT is _not_ a default setting */ -+ at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ -+ -+ cf_data = *data; -+ platform_device_register(&at91rm9200_cf_device); ++ platform_device_register(&at91_leds); +} +#else -+void __init at91_add_device_cf(struct at91_cf_data *data) {} ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} +#endif + + -+/* -------------------------------------------------------------------- -+ * MMC / SD + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9261.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c Tue May 8 12:13:30 2007 +@@ -97,6 +97,21 @@ + .pmc_mask = 1 << AT91SAM9261_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk ssc0_clk = { ++ .name = "ssc0_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_SSC0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc1_clk = { ++ .name = "ssc1_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_SSC1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc2_clk = { ++ .name = "ssc2_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_SSC2, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91SAM9261_ID_TC0, +@@ -135,7 +150,9 @@ + &twi_clk, + &spi0_clk, + &spi1_clk, +- // ssc 0 .. ssc2 ++ &ssc0_clk, ++ &ssc1_clk, ++ &ssc2_clk, + &tc0_clk, + &tc1_clk, + &tc2_clk, +@@ -230,6 +247,28 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization + * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB + -+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -+static u64 mmc_dmamask = 0xffffffffUL; -+static struct at91_mmc_data mmc_data; ++#include "tclib.h" + -+static struct resource mmc_resources[] = { ++static struct atmel_tcblock at91sam9261_tcblocks[] = { + [0] = { -+ .start = AT91RM9200_BASE_MCI, -+ .end = AT91RM9200_BASE_MCI + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91RM9200_ID_MCI, -+ .end = AT91RM9200_ID_MCI, -+ .flags = IORESOURCE_IRQ, -+ }, ++ .physaddr = AT91SAM9261_BASE_TCB0, ++ .irq = { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ } +}; + -+static struct platform_device at91rm9200_mmc_device = { -+ .name = "at91_mci", -+ .id = -1, -+ .dev = { -+ .dma_mask = &mmc_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ .platform_data = &mmc_data, -+ }, -+ .resource = mmc_resources, -+ .num_resources = ARRAY_SIZE(mmc_resources), -+}; ++#define at91sam9261_tc_init() atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks)) + -+void __init at91_add_device_mmc(struct at91_mmc_data *data) -+{ -+ if (!data) -+ return; -+ -+ /* input/irq */ -+ if (data->det_pin) { -+ at91_set_gpio_input(data->det_pin, 1); -+ at91_set_deglitch(data->det_pin, 1); -+ } -+ if (data->wp_pin) -+ at91_set_gpio_input(data->wp_pin, 1); -+ if (data->vcc_pin) -+ at91_set_gpio_output(data->vcc_pin, 0); -+ -+ /* CLK */ -+ at91_set_A_periph(AT91_PIN_PA27, 0); -+ -+ if (data->slot_b) { -+ /* CMD */ -+ at91_set_B_periph(AT91_PIN_PA8, 1); -+ -+ /* DAT0, maybe DAT1..DAT3 */ -+ at91_set_B_periph(AT91_PIN_PA9, 1); -+ if (data->wire4) { -+ at91_set_B_periph(AT91_PIN_PA10, 1); -+ at91_set_B_periph(AT91_PIN_PA11, 1); -+ at91_set_B_periph(AT91_PIN_PA12, 1); -+ } -+ } else { -+ /* CMD */ -+ at91_set_A_periph(AT91_PIN_PA28, 1); -+ -+ /* DAT0, maybe DAT1..DAT3 */ -+ at91_set_A_periph(AT91_PIN_PA29, 1); -+ if (data->wire4) { -+ at91_set_B_periph(AT91_PIN_PB3, 1); -+ at91_set_B_periph(AT91_PIN_PB4, 1); -+ at91_set_B_periph(AT91_PIN_PB5, 1); -+ } -+ } -+ -+ mmc_data = *data; -+ platform_device_register(&at91rm9200_mmc_device); -+} -+#else -+void __init at91_add_device_mmc(struct at91_mmc_data *data) {} -+#endif ++#else ++#define at91sam9261_tc_init() do {} while(0) ++#endif + + +/* -------------------------------------------------------------------- -+ * NAND / SmartMedia -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -+static struct at91_nand_data nand_data; + * AT91SAM9261 processor initialization + * -------------------------------------------------------------------- */ + +@@ -250,6 +289,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9261_gpio, 3); + -+#define NAND_BASE AT91_CHIPSELECT_3 ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9261_tc_init(); + } + + /* -------------------------------------------------------------------- +@@ -262,25 +304,25 @@ + static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ + 0, +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface 0 */ +- 6, /* Serial Peripheral Interface 1 */ +- 5, /* Serial Synchronous Controller 0 */ +- 5, /* Serial Synchronous Controller 1 */ +- 5, /* Serial Synchronous Controller 2 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface 0 */ ++ 5, /* Serial Peripheral Interface 1 */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 4, /* Serial Synchronous Controller 2 */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* LCD Controller */ + 0, + 0, +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c Tue May 8 12:56:33 2007 +@@ -14,6 +14,9 @@ + #include + + #include ++#include + -+static struct resource nand_resources[] = { -+ { -+ .start = NAND_BASE, -+ .end = NAND_BASE + SZ_8M - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; ++#include