From: Robert Balas Date: Thu, 2 Sep 2021 15:07:14 +0000 (+0200) Subject: ath79: add support for TP-Link TL-WA1201 v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=baacdd53dfd1daf3d4fada8921a46a562e4520e2;p=openwrt%2Fstaging%2Fthess.git ath79: add support for TP-Link TL-WA1201 v2 This device is a wireless access point working on the 2.4 GHz and 5 GHz band, based on Qualcomm/Atheros QCA9563 + QCA9886. Specification - 775 MHz CPU - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - QCA9563: 2.4 GHz 3x3 - QCA9886: 5 GHz - AR8033: 1x 1 Gbs Ethernet - 4x LED, WPS factory reset and power button - bare UART on PCB (accessible through testpoints) Methods for Flashing: - Apply factory image in OEM firmware web-gui. Wait a minute after the progress bar completes and restart the device. - Sysupgrade on top of existing OpenWRT image - Solder wires onto UART testpoints and attach a terminal. Boot the device and press enter to enter u-boot's menu. Then issue the following commands 1. setenv serverip your-server-ip setenv ipaddr your-device-ip 2. tftp 0x80060000 openwrt-squashfs.bin (Rembember output of size in hex, henceforth "sizeinhex") 3. erase 0x9f030000 +"sizeinhex" 4. cp.b 0x80060000 0x9f030000 0x"sizeinhex" 5. reboot Recover: - U-boot serial console Signed-off-by: Robert Balas [convert to nvmem] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wa1201-v2.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wa1201-v2.dts new file mode 100644 index 0000000000..71ab4f8aad --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wa1201-v2.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca956x.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-wa1201-v2", "qca,qca9563"; + model = "TP-Link TL-WA1201 v2"; + + aliases { + label-mac-device = ð0; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + mdio-gpio0 = &mdio2; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "green:wlan2g"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g { + label = "green:wlan5g"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + lan { + label = "green:lan"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + wps { + label = "WPS button"; + linux,code = ; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + mdio2: mdio { + compatible = "virtual,mdio-gpio"; + + #address-cells = <1>; + #size-cells = <0>; + + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */ + + phy4: ethernet-phy@4 { + reg = <4>; + + eee-broken-100tx; + eee-broken-1000t; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +ð0 { + status = "okay"; + + phy-mode = "sgmii"; + phy-handle = <&phy4>; + + nvmem-cells = <&macaddr_info_8>; + nvmem-cell-names = "mac-address"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + + nvmem-cells = <&macaddr_info_8>; + nvmem-cell-names = "mac-address"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + info: partition@20000 { + label = "info"; + reg = <0x020000 0x010000>; + read-only; + }; + + partition@30000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x030000 0xce0000>; + }; + + partition@d10000 { + label = "tplink"; + reg = <0xd10000 0x2e0000>; + read-only; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&info { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_info_8: macaddr@8 { + reg = <0x8 0x6>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 8715a57213..ffc6f3086e 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -19,7 +19,8 @@ glinet,gl-ar300m-lite|\ glinet,gl-ar300m16|\ pcs,cap324|\ tplink,cpe610-v1|\ -tplink,cpe610-v2) +tplink,cpe610-v2|\ +tplink,tl-wa1201-v2) ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" ;; alfa-network,n2q) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 9cec8d5098..e2c6f9feac 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -72,6 +72,7 @@ ath79_setup_interfaces() tplink,re450-v2|\ tplink,re450-v3|\ tplink,re455-v1|\ + tplink,tl-wa1201-v2|\ tplink,tl-wr902ac-v1|\ ubnt,bullet-ac|\ ubnt,bullet-m-ar7240|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a01cd9f6f8..5ba1a7a8ff 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -229,7 +229,8 @@ case "$FIRMWARE" in tplink,archer-c60-v2|\ tplink,archer-c60-v3|\ tplink,archer-c6-v2|\ - tplink,archer-c6-v2-us) + tplink,archer-c6-v2-us|\ + tplink,tl-wa1201-v2) caldata_extract "art" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 16494b111f..b6755fe547 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -510,6 +510,17 @@ define Device/tplink_tl-mr6400-v1 endef TARGET_DEVICES += tplink_tl-mr6400-v1 +define Device/tplink_tl-wa1201-v2 + $(Device/tplink-safeloader-uimage) + SOC := qca9563 + IMAGE_SIZE := 13184k + DEVICE_MODEL := TL-WA1201 + DEVICE_VARIANT := v2 + TPLINK_BOARD_ID := TL-WA1201-V2 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct +endef +TARGET_DEVICES += tplink_tl-wa1201-v2 + define Device/tplink_tl-wdr3500-v1 $(Device/tplink-8mlzma) SOC := ar9344 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index bd4d4b562e..597c48b9d4 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -1619,6 +1619,48 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the TL-WA1201 v2 */ + { + .id = "TL-WA1201-V2", + .vendor = "", + .support_list = + "SupportList:\n" + "{product_name:TL-WA1201,product_ver:2.0.0,special_id:45550000}\n" + "{product_name:TL-WA1201,product_ver:2.0.0,special_id:55530000}\n", + .part_trail = 0x00, + .soft_ver = "soft_ver:1.0.1 Build 20200709 rel.66244\n", + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"default-mac", 0x20000, 0x00200}, + {"pin", 0x20200, 0x00100}, + {"product-info", 0x20300, 0x00200}, + {"device-id", 0x20500, 0x0fb00}, + {"firmware", 0x30000, 0xce0000}, + {"portal-logo", 0xd10000, 0x20000}, + {"portal-back", 0xd30000, 0x200000}, + {"soft-version", 0xf30000, 0x00200}, + {"extra-para", 0xf30200, 0x00200}, + {"support-list", 0xf30400, 0x00200}, + {"profile", 0xf30600, 0x0fa00}, + {"apdef-config", 0xf40000, 0x10000}, + {"ap-config", 0xf50000, 0x10000}, + {"redef-config", 0xf60000, 0x10000}, + {"re-config", 0xf70000, 0x10000}, + {"multidef-config", 0xf80000, 0x10000}, + {"multi-config", 0xf90000, 0x10000}, + {"clientdef-config", 0xfa0000, 0x10000}, + {"client-config", 0xfb0000, 0x10000}, + {"partition-table", 0xfc0000, 0x10000}, + {"user-config", 0xfd0000, 0x10000}, + {"certificate", 0xfe0000, 0x10000}, + {"radio", 0xff0000, 0x10000}, + {NULL, 0, 0} + }, + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system", + }, + /** Firmware layout for the TL-WA850RE v2 */ { .id = "TLWA850REV2", @@ -2995,7 +3037,8 @@ static void build_image(const char *output, const uint8_t extra_para[2] = {0x01, 0x00}; parts[5] = make_extra_para(info, extra_para, sizeof(extra_para)); - } else if (strcasecmp(info->id, "ARCHER-C6-V2") == 0) { + } else if (strcasecmp(info->id, "ARCHER-C6-V2") == 0 || + strcasecmp(info->id, "TL-WA1201-V2") == 0) { const uint8_t extra_para[2] = {0x00, 0x01}; parts[5] = make_extra_para(info, extra_para, sizeof(extra_para));