From: afzal mohammed Date: Fri, 27 Mar 2020 16:10:44 +0000 (+0530) Subject: unicore32: Replace setup_irq() by request_irq() X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ba947241f125b19bb6f08a78c22827b9f6a1317a;p=openwrt%2Fstaging%2Fblogic.git unicore32: Replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. setup_irq() was required in older kernels as the memory allocator was not available during early boot. Hence replace setup_irq() by request_irq(). Signed-off-by: afzal mohammed Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/82667ae23520611b2a9d8db77e1d8aeb982f08e5.1585320721.git.afzal.mohd.ma@gmail.com --- diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c index 8b217a761bf0..c3a37edf4d40 100644 --- a/arch/unicore32/kernel/time.c +++ b/arch/unicore32/kernel/time.c @@ -72,13 +72,6 @@ static struct clocksource cksrc_puv3_oscr = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static struct irqaction puv3_timer_irq = { - .name = "ost0", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = puv3_ost0_interrupt, - .dev_id = &ckevt_puv3_osmr0, -}; - void __init time_init(void) { writel(0, OST_OIER); /* disable any timer interrupts */ @@ -94,7 +87,9 @@ void __init time_init(void) ckevt_puv3_osmr0.min_delta_ticks = MIN_OSCR_DELTA * 2; ckevt_puv3_osmr0.cpumask = cpumask_of(0); - setup_irq(IRQ_TIMER0, &puv3_timer_irq); + if (request_irq(IRQ_TIMER0, puv3_ost0_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "ost0", &ckevt_puv3_osmr0)) + pr_err("Failed to register ost0 interrupt\n"); clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE); clockevents_register_device(&ckevt_puv3_osmr0);