From: Alex Maclean <monkeh@monkeh.net>
Date: Wed, 30 May 2018 13:18:54 +0000 (+0100)
Subject: ath79: add TP-Link TL-WR703N port
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ba5b6c619b21c36a0bc1c1ed02c56f3cc05ddf60;p=openwrt%2Fstaging%2Fldir.git

ath79: add TP-Link TL-WR703N port

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
---

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 7dc90fcab7..a9eeb5b455 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -9,6 +9,7 @@ ath79_setup_interfaces()
 
 	case "$board" in
 	"avm,fritz300e"|\
+	"tplink,tl-wr703n"|\
 	"ubnt,unifi")
 		ucidef_set_interface_lan "eth0"
 		;;
diff --git a/target/linux/ath79/dts/ar9331_tl-wr703n.dts b/target/linux/ath79/dts/ar9331_tl-wr703n.dts
new file mode 100644
index 0000000000..70f94ed4cb
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tl-wr703n.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	compatible = "tplink,tl-wr703n", "qca,ar9331";
+	model = "TP-Link TL-WR703N";
+
+	aliases {
+		serial0 = &uart;
+		led-status = &led_system;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+	
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_system: system {
+			label = "tl-wr703n:blue:system";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_usb_vbus: reg_usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				reg = <0x0 0x20000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			firmware: partition@20000 {
+				reg = <0x20000 0x3d0000>;
+				label = "firmware";
+			};
+
+			art: partition@3f0000 {
+				reg = <0x3f0000 0x10000>;
+				label = "art";
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&phy4>;
+
+	mtd-mac-address = <&uboot 0x1fc00>;
+
+	gmac-config {
+		device = <&gmac>;
+
+		switch-phy-addr-swap = <0>;
+		switch-phy-swap = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+		phy-mode = "mii";
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk
index 09180bd678..e6d5feefc5 100644
--- a/target/linux/ath79/image/tiny-tp-link.mk
+++ b/target/linux/ath79/image/tiny-tp-link.mk
@@ -1,6 +1,16 @@
 include ./common-tp-link.mk
 
 
+define Device/tl-wr703n
+  $(Device/tplink-4mlzma)
+  ATH_SOC := ar9331
+  DEVICE_TITLE := TP-Link TL-WR703N
+  DEVICE_PACKAGES := kmod-usb-chipidea2
+  TPLINK_HWID := 0x07030101
+  SUPPORTED_DEVICES := tplink,tl-wr703n tl-wr703n
+endef
+TARGET_DEVICES += tl-wr703n
+
 define Device/tl-wr740n-v2
   $(Device/tplink-4m)
   ATH_SOC := ar7240