From: Andrey Bondar Date: Wed, 8 Jul 2020 10:51:34 +0000 (+0300) Subject: ath79: add support for 8devices Lima board X-Git-Tag: v21.02.0-rc1~2315 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ba59021d64d52a5ec3e75b9701d65f940c33a670;p=openwrt%2Fstaging%2Fchunkeey.git ath79: add support for 8devices Lima board Specification: • 650/600/216 MHz (CPU/DDR/AHB) • 64 MB of RAM (DDR2) • 32 MB of FLASH • 2T2R 2.4 GHz • 2x 10/100 Mbps Ethernet • 1x USB 2.0 Host socket • 1x miniPCIe slot • UART for serial console • 14x GPIO Flash instructions: Upgrading from ar71xx target: • Upload image into the board: scp openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin root@192.168.1.1/tmp/ • Run sysupgrade sysupgrade -F /tmp/openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin Upgrading from u-boot: • Set up tftp server with openwrt-ath79-generic-8dev_lima-initramfs-kernel.bin • Go to u-boot (reboot and press ESC when prompted) • Set TFTP server IP setenv serverip 192.168.1.254 • Set device ip from the same subnet setenv ipaddr 192.168.1.1 • Copy new firmware to board tftpboot 0x82000000 initramfs.bin • Boot OpenWRT bootm 0x82000000 • Upload image openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin into the board • Run sysupgrade. Signed-off-by: Andrey Bondar --- diff --git a/target/linux/ath79/dts/qca9531_8dev_lima.dts b/target/linux/ath79/dts/qca9531_8dev_lima.dts new file mode 100644 index 0000000000..118704ab40 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_8dev_lima.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca953x.dtsi" + +/ { + compatible = "8dev,lima", "qca,qca9531"; + model = "8devices Lima"; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux-code = "KEY_RESTART"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + status = "okay"; + + dr_mode = "host"; +}; + +&usb_phy { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + /* Winbond W25Q256 SPI flash */ + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <45000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x040000>; + }; + + art: partition@80000 { + label = "art"; + reg = <0x080000 0x040000>; + read-only; + }; + + partition@c0000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x0c0000 0xf40000>; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy0>; + mtd-mac-address = <&art 0x6>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <1>; + switch-phy-swap = <1>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 3db4d2a994..2573f66f4a 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -9,6 +9,10 @@ board=$(board_name) case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in + 8dev,lima|\ + ubnt,unifi) + caldata_extract "art" 0x1000 0x800 + ;; avm,fritz1750e|\ avm,fritz4020|\ avm,fritz450e|\ @@ -110,9 +114,6 @@ case "$FIRMWARE" in ubnt,rocket-m) caldata_extract "art" 0x1000 0x1000 ;; - ubnt,unifi) - caldata_extract "art" 0x1000 0x800 - ;; wd,mynet-n750) caldata_extract "art" 0x5000 0x440 ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 0e7efa32af..d8cac425e8 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -152,6 +152,16 @@ define Device/8dev_carambola2 endef TARGET_DEVICES += 8dev_carambola2 +define Device/8dev_lima + SOC := qca9531 + DEVICE_VENDOR := 8devices + DEVICE_MODEL := Lima + DEVICE_PACKAGES := kmod-usb2 + IMAGE_SIZE := 15616k + SUPPORTED_DEVICES += lima +endef +TARGET_DEVICES += 8dev_lima + define Device/adtran_bsap1880 SOC := ar7161 DEVICE_VENDOR := Adtran/Bluesocket