From: Petr Štetiar Date: Thu, 29 Jun 2023 12:29:02 +0000 (+0200) Subject: ipq807x: prpl-haze: fix sysupgrade flashing from bootloader X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ba415af5706f0369e4d299e4dfe50541a4a8056b;p=openwrt%2Fstaging%2Fblocktrron.git ipq807x: prpl-haze: fix sysupgrade flashing from bootloader While flashing sysupgrade image from U-Boot, then the rootfs_data overlay filesystem formatting is left for the fstools during firstboot, but that wont work as mkfs.f2fs is missing in the sysupgrade image: mount_root: overlay filesystem in /dev/loop0 has not been formatted yet mount_root: no usable overlay filesystem found, using tmpfs overlay sh: mkfs.f2fs: not found Filesystem Size Used Available Use% Mounted on /dev/loop0 139.6M 46.9M 92.6M 34% /overlay Number Start (sector) End (sector) Size Code Name 20 98850 406349 150.1 MiB FFFF rootfs So lets fix it by adding f2fs support to the sysupgrade image. Signed-off-by: Petr Štetiar --- diff --git a/target/linux/qualcommax/image/ipq807x.mk b/target/linux/qualcommax/image/ipq807x.mk index 54f8caf5d7..555c723c5f 100644 --- a/target/linux/qualcommax/image/ipq807x.mk +++ b/target/linux/qualcommax/image/ipq807x.mk @@ -115,7 +115,8 @@ define Device/prpl_haze DEVICE_MODEL := Haze DEVICE_DTS_CONFIG := config@hk09 SOC := ipq8072 - DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci + DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci \ + mkf2fs f2fsck kmod-fs-f2fs endef TARGET_DEVICES += prpl_haze