From: John Crispin Date: Sat, 12 Jul 2014 06:54:03 +0000 (+0000) Subject: ramips: add support for WR8305RT board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ba3988fb16c1392c41e4710474fc5df1f1f92a83;p=openwrt%2Fstaging%2Fblocktrron.git ramips: add support for WR8305RT board Signed-off-by: Jorge Vargas Signed-off-by: John Crispin SVN-Revision: 41584 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 14d630edcf..908547e50e 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -152,6 +152,9 @@ get_status_led() { wr512-3gn) status_led="wr512:green:wps" ;; + wr8305rt) + status_led="wr8305rt:sys" + ;; wnce2001) status_led="netgear:green:power" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index b56fb63423..e958899ca1 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -120,6 +120,7 @@ case "$FIRMWARE" in wnce2001 | \ wr512-3gn | \ wr6202 | \ + wr8305rt | \ wrtnode | \ mzk-w300nh2 | \ ur-326n4g | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index 00b604008e..19ec4f5904 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -186,6 +186,11 @@ case $board in set_wifi_led "zbtlink:blue:air" set_usb_led "zbtlink:blue:usb" ;; + wr8305rt) + ucidef_set_led_default "power" "power" "wr8305rt:sys" "1" + set_usb_led "wr8305rt:usb" + set_wifi_led "wr8305rt:wifi" + ;; esac ucidef_commit_leds diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index a14acb6252..472ae588d5 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -163,6 +163,13 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "2" "6t" ;; + wr8305rt) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 6t" + ucidef_add_switch_vlan "switch0" "2" "4 6t" + ;; + d105 | \ na930 | \ omni-emb-hpm|\ @@ -245,6 +252,11 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 1) ;; + wr8305rt) + lan_mac=$(mtd_get_mac_binary factory 4) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + *) wan_mac=$(macaddr_add "$lan_mac" 1) ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 8538c136ab..2a0a4fdc76 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -17,7 +17,8 @@ preinit_set_mac_address() { w150m | \ mzk-w300nh2 |\ wl-330n |\ - wl-330n3g) + wl-330n3g |\ + wr8305rt) mac=$(mtd_get_mac_binary factory 4) ifconfig eth0 hw ether $mac 2>/dev/null ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 2ae8c9e8ff..b36b53c302 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -310,6 +310,9 @@ ramips_board_detect() { *"Zbtlink ZBT-WA05") name="zbt-wa05" ;; + *"ZBT WR8305RT") + name="wr8305rt" + ;; *) name="generic" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 805a63fed4..8ada58b296 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -89,6 +89,7 @@ platform_check_image() { ur-336un |\ wr512-3gn |\ wmr300 |\ + wr8305rt |\ wrtnode |\ x5 |\ x8 |\ diff --git a/target/linux/ramips/dts/WR8305RT.dts b/target/linux/ramips/dts/WR8305RT.dts new file mode 100644 index 0000000000..81653f509d --- /dev/null +++ b/target/linux/ramips/dts/WR8305RT.dts @@ -0,0 +1,108 @@ +/dts-v1/; + +/include/ "mt7620n.dtsi" + +/ { + compatible = "wr8305rt", "ralink,mt7620n-soc"; + model = "ZBT WR8305RT"; + + palmbus@10000000 { + gpio1: gpio@638 { + status = "okay"; + }; + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "en25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + pinctrl { + state_default: pinctrl0 { + ephy { + ralink,group = "ephy"; + ralink,function = "ephy"; + }; + default { + ralink,group = "i2c", "uartf", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + sys { + label = "wr8305rt:sys"; + gpios = <&gpio1 14 1>; + }; + lan { + label = "wr8305rt:usb"; + gpios = <&gpio1 15 1>; + }; + wifi { + label = "wr8305rt:wifi"; + gpios = <&gpio3 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + }; +}; + diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index e3ba60ed95..25889ea052 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -737,6 +737,7 @@ endif Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300) Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U) +Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT) Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) @@ -744,6 +745,7 @@ ifeq ($(SUBTARGET),mt7620n) define Image/Build/Profile/Default $(call Image/Build/Profile/WMR300,$(1)) $(call Image/Build/Profile/RT-N14U,$(1)) + $(call Image/Build/Profile/WR8305RT,$(1)) $(call Image/Build/Profile/WRTNODE,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) endef