From: Eros Brigmann Date: Thu, 4 Jul 2024 18:10:25 +0000 (+0200) Subject: ramips: add support for Wavlink WL-WN531G3-A2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ba30cbef415dba6680df4f891617843553989e92;p=openwrt%2Fstaging%2Fansuel.git ramips: add support for Wavlink WL-WN531G3-A2 This device is exactly the same as WL-WN531G3 but with different partition layout and different MAC layout. Labeled as Quantum D4G Rev.: A2. Hardware -------- SoC: Mediatek MT7620A RAM: 64MB FLASH: 8MB NOR (GigaDevice GD25Q64CS) ETH: - 2x 10/100/1000 Mbps Ethernet (RTL8211F) - 3x 10/100 Mbps Ethernet (integrated in SOC) WIFI: - 2.4GHz: 1x (integrated in SOC) (2x2:2) - 5GHz: 1x MT7612E (2x2:2) - 4 external antennas BTN: - 1x Reset button - 1x Touchlink button - 1x Turbo button - 1x Wps button - 1x ON/OFF switch LEDS: - 1x Red led (system status) - 1x Blue led (system status) - 5x Blue leds (ethernet ports) - 1x Power led - 1x Wifi led UART: - 57600-8-N-1 Everything works correctly. Installation ------------ Flash the initramfs image in the OEM firmware interface When Openwrt boots, flash the sysupgrade image otherwise you won't be able to keep configuration between reboots. Notes ----- 1) Router mac addresses: LAN XX:XX:XX:XX:XX:0F (factory @ 0x28) WAN XX:XX:XX:XX:XX:10 (factory @ 0x2e) WIFI 2G XX:XX:XX:XX:XX:11 (factory @ 0x04) WIFI 5G XX:XX:XX:XX:XX:12 (factory @ 0x8004) LABEL XX:XX:XX:XX:XX:11 Signed-off-by: Eros Brigmann Link: https://github.com/openwrt/openwrt/pull/15876 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/ramips/dts/mt7620a_wavlink_wl-wn531g3-a2.dts b/target/linux/ramips/dts/mt7620a_wavlink_wl-wn531g3-a2.dts new file mode 100644 index 0000000000..1a12005c92 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_wavlink_wl-wn531g3-a2.dts @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "mt7620a.dtsi" +#include +#include +#include + +/ { + compatible = "wavlink,wl-wn531g3", "ralink,mt7620a-soc"; + model = "Wavlink WL-WN531G3"; + + aliases { + led-boot = &led_status_blue; + led-failsafe = &led_status_red; + led-running = &led_status_blue; + led-upgrade = &led_status_red; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + turbo { + label = "turbo"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + touchlink { + label = "touchlink"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_blue: led_status_blue { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + + led_status_red: led_status_red { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_28: macaddr@28 { + reg = <0x28 0x6>; + }; + + macaddr_factory_2e: macaddr@2e { + reg = <0x2e 0x6>; + }; + + eeprom_radio_0: eeprom@0 { + reg = <0x0 0x200>; + }; + + eeprom_radio_8000: eeprom@8000 { + reg = <0x8000 0x200>; + }; + }; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins>, <&rgmii2_pins>, <&mdio_pins>; + + nvmem-cells = <&macaddr_factory_28>; + nvmem-cell-names = "mac-address"; + + mediatek,portmap = "llllw"; + + port@4 { + status = "okay"; + phy-handle = <&phy4>; + phy-mode = "rgmii"; + + nvmem-cells = <&macaddr_factory_2e>; + nvmem-cell-names = "mac-address"; + }; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_radio_8000>; + nvmem-cell-names = "eeprom"; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&gsw { + mediatek,port4-gmac; +}; + +&wmac { + nvmem-cells = <&eeprom_radio_0>; + nvmem-cell-names = "eeprom"; +}; + +&state_default { + gpio { + groups = "i2c", "uartf"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 67deb8f040..51811a86ea 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -1349,6 +1349,16 @@ define Device/wavlink_wl-wn531g3 endef TARGET_DEVICES += wavlink_wl-wn531g3 + +define Device/wavlink_wl-wn531g3-a2 + SOC := mt7620a + IMAGE_SIZE := 7872k + DEVICE_VENDOR := Wavlink + DEVICE_MODEL := WL-WN531G3-A2 + DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek kmod-usb2 kmod-usb-ohci +endef +TARGET_DEVICES += wavlink_wl-wn531g3-a2 + define Device/wavlink_wl-wn535k1 SOC := mt7620a IMAGE_SIZE := 7360k diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index d23ec76327..577f77cb93 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -257,6 +257,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "5:lan:1" "4:wan" "6@eth0" ;; + wavlink,wl-wn531g3-a2) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "5:lan:1" "4:wan" "6@eth0" + ;; wavlink,wl-wn535k1) ucidef_add_switch "switch0" \ "2:lan:2" "5:lan:1" "4:wan" "6@eth0" @@ -431,6 +435,7 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$(mtd_get_mac_binary rom 0xf100)" 1) ;; wavlink,wl-wn531g3|\ + wavlink,wl-wn531g3-a2|\ zbtlink,zbt-we1026-5g-16m) label_mac=$(mtd_get_mac_binary factory 0x4) ;;