From: Mathias Kresin <dev@kresin.me>
Date: Wed, 17 Feb 2021 22:37:54 +0000 (+0100)
Subject: lantiq: fritz7320: enable USB power supply
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ba07cc0cbb3d486366e4ae3b79e69f972d8c2c5d;p=openwrt%2Fstaging%2Fnbd.git

lantiq: fritz7320: enable USB power supply

The USB ports if a FRIZZ!Box 7320 do not supply power to connected
devices.

Add the GPIOs enabling USB power as regulator, to enable USB power
supply as soon as the USB driver is loaded.

Fixes FS#3624

Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
index 9fbac6fa12..5f38936577 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
@@ -69,6 +69,30 @@
 			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB1_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gsw {
@@ -77,6 +101,26 @@
 	mtd-mac-address-increment = <(-2)>;
 };
 
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		usb0_vbus {
+			lantiq,pins = "io50";
+			lantiq,pull = <0>;
+			lantiq,open-drain = <0>;
+			lantiq,output = <1>;
+		};
+		usb1_vbus {
+			lantiq,pins = "io51";
+			lantiq,pull = <0>;
+			lantiq,open-drain = <0>;
+			lantiq,output = <1>;
+		};
+	};
+};
+
 &localbus {
 	flash@0 {
 		compatible = "lantiq,nor";
@@ -142,8 +186,10 @@
 
 &usb0 {
 	status = "okay";
+	vbus-supply = <&usb0_vbus>;
 };
 
 &usb1 {
 	status = "okay";
+	vbus-supply = <&usb1_vbus>;
 };