From: Rafał Miłecki Date: Sun, 14 Aug 2016 09:21:48 +0000 (+0200) Subject: bcm53xx: rename PHY patches to use 07* prefix X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b9d8c8101813a1ae400710906a2c481a9a543463;p=openwrt%2Fstaging%2Fluka.git bcm53xx: rename PHY patches to use 07* prefix This is not a strict rule but it matches better this one: 7xx - network / phy driver patches Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/bcm53xx/patches-4.4/070-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch b/target/linux/bcm53xx/patches-4.4/070-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch new file mode 100644 index 0000000000..c12cdb1861 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/070-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch @@ -0,0 +1,252 @@ +From d3feb406733544dbf0e239ef945a09decdceac88 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 14 Apr 2016 11:37:43 +0200 +Subject: [PATCH] phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Northstar is a family of SoCs used in home routers. They have USB 2.0 +and 3.0 controllers with PHYs that need to be properly initialized. +This driver provides PHY init support in a generic way and can be bound +with an EHCI controller driver. +There are (just a few) registers being defined in bcma header. It's +because DMU/CRU registers will be also needed in other drivers. We will +need them e.g. in PCIe controller/PHY driver and at some point probably +in clock driver for BCM53573 chipset. By using include/linux/bcma/ we +avoid code duplication. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Kishon Vijay Abraham I +--- + .../devicetree/bindings/phy/bcm-ns-usb2-phy.txt | 21 ++++ + drivers/phy/Kconfig | 9 ++ + drivers/phy/Makefile | 1 + + drivers/phy/phy-bcm-ns-usb2.c | 137 +++++++++++++++++++++ + include/linux/bcma/bcma.h | 1 + + include/linux/bcma/bcma_driver_arm_c9.h | 15 +++ + 6 files changed, 184 insertions(+) + create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt + create mode 100644 drivers/phy/phy-bcm-ns-usb2.c + create mode 100644 include/linux/bcma/bcma_driver_arm_c9.h + +--- /dev/null ++++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt +@@ -0,0 +1,21 @@ ++Driver for Broadcom Northstar USB 2.0 PHY ++ ++Required properties: ++- compatible: brcm,ns-usb2-phy ++- reg: iomem address range of DMU (Device Management Unit) ++- reg-names: "dmu", the only needed & supported reg right now ++- clocks: USB PHY reference clock ++- clock-names: "phy-ref-clk", the only needed & supported clock right now ++ ++To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it ++requires passing phandle to the USB PHY reference clock. ++ ++Example: ++ usb2-phy { ++ compatible = "brcm,ns-usb2-phy"; ++ reg = <0x1800c000 0x1000>; ++ reg-names = "dmu"; ++ #phy-cells = <0>; ++ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; ++ clock-names = "phy-ref-clk"; ++ }; +--- a/drivers/phy/Kconfig ++++ b/drivers/phy/Kconfig +@@ -15,6 +15,15 @@ config GENERIC_PHY + phy users can obtain reference to the PHY. All the users of this + framework should select this config. + ++config PHY_BCM_NS_USB2 ++ tristate "Broadcom Northstar USB 2.0 PHY Driver" ++ depends on ARCH_BCM_IPROC || COMPILE_TEST ++ depends on HAS_IOMEM && OF ++ select GENERIC_PHY ++ help ++ Enable this to support Broadcom USB 2.0 PHY connected to the USB ++ controller on Northstar family. ++ + config PHY_BERLIN_USB + tristate "Marvell Berlin USB PHY Driver" + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF +--- a/drivers/phy/Makefile ++++ b/drivers/phy/Makefile +@@ -3,6 +3,7 @@ + # + + obj-$(CONFIG_GENERIC_PHY) += phy-core.o ++obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o + obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o + obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o + obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o +--- /dev/null ++++ b/drivers/phy/phy-bcm-ns-usb2.c +@@ -0,0 +1,137 @@ ++/* ++ * Broadcom Northstar USB 2.0 PHY Driver ++ * ++ * Copyright (C) 2016 Rafał Miłecki ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct bcm_ns_usb2 { ++ struct device *dev; ++ struct clk *ref_clk; ++ struct phy *phy; ++ void __iomem *dmu; ++}; ++ ++static int bcm_ns_usb2_phy_init(struct phy *phy) ++{ ++ struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy); ++ struct device *dev = usb2->dev; ++ void __iomem *dmu = usb2->dmu; ++ u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv; ++ int err = 0; ++ ++ err = clk_prepare_enable(usb2->ref_clk); ++ if (err < 0) { ++ dev_err(dev, "Failed to prepare ref clock: %d\n", err); ++ goto err_out; ++ } ++ ++ ref_clk_rate = clk_get_rate(usb2->ref_clk); ++ if (!ref_clk_rate) { ++ dev_err(dev, "Failed to get ref clock rate\n"); ++ err = -EINVAL; ++ goto err_clk_off; ++ } ++ ++ usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL); ++ ++ if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) { ++ usb_pll_pdiv = usb2ctl; ++ usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK; ++ usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT; ++ } else { ++ usb_pll_pdiv = 1 << 3; ++ } ++ ++ /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */ ++ usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate; ++ ++ /* Unlock DMU PLL settings with some magic value */ ++ writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY); ++ ++ /* Write USB 2.0 PLL control setting */ ++ usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK; ++ usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT; ++ writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL); ++ ++ /* Lock DMU PLL settings */ ++ writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY); ++ ++err_clk_off: ++ clk_disable_unprepare(usb2->ref_clk); ++err_out: ++ return err; ++} ++ ++static const struct phy_ops ops = { ++ .init = bcm_ns_usb2_phy_init, ++ .owner = THIS_MODULE, ++}; ++ ++static int bcm_ns_usb2_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct bcm_ns_usb2 *usb2; ++ struct resource *res; ++ struct phy_provider *phy_provider; ++ ++ usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL); ++ if (!usb2) ++ return -ENOMEM; ++ usb2->dev = dev; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu"); ++ usb2->dmu = devm_ioremap_resource(dev, res); ++ if (IS_ERR(usb2->dmu)) { ++ dev_err(dev, "Failed to map DMU regs\n"); ++ return PTR_ERR(usb2->dmu); ++ } ++ ++ usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk"); ++ if (IS_ERR(usb2->ref_clk)) { ++ dev_err(dev, "Clock not defined\n"); ++ return PTR_ERR(usb2->ref_clk); ++ } ++ ++ usb2->phy = devm_phy_create(dev, NULL, &ops); ++ if (IS_ERR(dev)) ++ return PTR_ERR(dev); ++ ++ phy_set_drvdata(usb2->phy, usb2); ++ platform_set_drvdata(pdev, usb2); ++ ++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); ++ return PTR_ERR_OR_ZERO(phy_provider); ++} ++ ++static const struct of_device_id bcm_ns_usb2_id_table[] = { ++ { .compatible = "brcm,ns-usb2-phy", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table); ++ ++static struct platform_driver bcm_ns_usb2_driver = { ++ .probe = bcm_ns_usb2_probe, ++ .driver = { ++ .name = "bcm_ns_usb2", ++ .of_match_table = bcm_ns_usb2_id_table, ++ }, ++}; ++module_platform_driver(bcm_ns_usb2_driver); ++ ++MODULE_LICENSE("GPL v2"); +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -4,6 +4,7 @@ + #include + #include + ++#include + #include + #include + #include +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_arm_c9.h +@@ -0,0 +1,15 @@ ++#ifndef LINUX_BCMA_DRIVER_ARM_C9_H_ ++#define LINUX_BCMA_DRIVER_ARM_C9_H_ ++ ++/* DMU (Device Management Unit) */ ++#define BCMA_DMU_CRU_USB2_CONTROL 0x0164 ++#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK 0x00000FFC ++#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT 2 ++#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK 0x00007000 ++#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT 12 ++#define BCMA_DMU_CRU_CLKSET_KEY 0x0180 ++#define BCMA_DMU_CRU_STRAPS_CTRL 0x02A0 ++#define BCMA_DMU_CRU_STRAPS_CTRL_USB3 0x00000010 ++#define BCMA_DMU_CRU_STRAPS_CTRL_4BYTE 0x00008000 ++ ++#endif /* LINUX_BCMA_DRIVER_ARM_C9_H_ */ diff --git a/target/linux/bcm53xx/patches-4.4/070-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch b/target/linux/bcm53xx/patches-4.4/070-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch new file mode 100644 index 0000000000..ae3462f43e --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/070-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch @@ -0,0 +1,27 @@ +From 6c081ff6fd5abd621797570be43d5e3c6acfcd58 Mon Sep 17 00:00:00 2001 +From: Dan Carpenter +Date: Tue, 10 May 2016 11:01:33 +0300 +Subject: [PATCH] phy: bcm-ns-usb2: checking the wrong variable + +We intended to test "usb2->phy" here instead of "dev". + +Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar') +Signed-off-by: Dan Carpenter +Signed-off-by: Kishon Vijay Abraham I +--- + drivers/phy/phy-bcm-ns-usb2.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/phy/phy-bcm-ns-usb2.c ++++ b/drivers/phy/phy-bcm-ns-usb2.c +@@ -109,8 +109,8 @@ static int bcm_ns_usb2_probe(struct plat + } + + usb2->phy = devm_phy_create(dev, NULL, &ops); +- if (IS_ERR(dev)) +- return PTR_ERR(dev); ++ if (IS_ERR(usb2->phy)) ++ return PTR_ERR(usb2->phy); + + phy_set_drvdata(usb2->phy, usb2); + platform_set_drvdata(pdev, usb2); diff --git a/target/linux/bcm53xx/patches-4.4/089-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch b/target/linux/bcm53xx/patches-4.4/089-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch deleted file mode 100644 index c12cdb1861..0000000000 --- a/target/linux/bcm53xx/patches-4.4/089-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch +++ /dev/null @@ -1,252 +0,0 @@ -From d3feb406733544dbf0e239ef945a09decdceac88 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 14 Apr 2016 11:37:43 +0200 -Subject: [PATCH] phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Northstar is a family of SoCs used in home routers. They have USB 2.0 -and 3.0 controllers with PHYs that need to be properly initialized. -This driver provides PHY init support in a generic way and can be bound -with an EHCI controller driver. -There are (just a few) registers being defined in bcma header. It's -because DMU/CRU registers will be also needed in other drivers. We will -need them e.g. in PCIe controller/PHY driver and at some point probably -in clock driver for BCM53573 chipset. By using include/linux/bcma/ we -avoid code duplication. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kishon Vijay Abraham I ---- - .../devicetree/bindings/phy/bcm-ns-usb2-phy.txt | 21 ++++ - drivers/phy/Kconfig | 9 ++ - drivers/phy/Makefile | 1 + - drivers/phy/phy-bcm-ns-usb2.c | 137 +++++++++++++++++++++ - include/linux/bcma/bcma.h | 1 + - include/linux/bcma/bcma_driver_arm_c9.h | 15 +++ - 6 files changed, 184 insertions(+) - create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt - create mode 100644 drivers/phy/phy-bcm-ns-usb2.c - create mode 100644 include/linux/bcma/bcma_driver_arm_c9.h - ---- /dev/null -+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt -@@ -0,0 +1,21 @@ -+Driver for Broadcom Northstar USB 2.0 PHY -+ -+Required properties: -+- compatible: brcm,ns-usb2-phy -+- reg: iomem address range of DMU (Device Management Unit) -+- reg-names: "dmu", the only needed & supported reg right now -+- clocks: USB PHY reference clock -+- clock-names: "phy-ref-clk", the only needed & supported clock right now -+ -+To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it -+requires passing phandle to the USB PHY reference clock. -+ -+Example: -+ usb2-phy { -+ compatible = "brcm,ns-usb2-phy"; -+ reg = <0x1800c000 0x1000>; -+ reg-names = "dmu"; -+ #phy-cells = <0>; -+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; -+ clock-names = "phy-ref-clk"; -+ }; ---- a/drivers/phy/Kconfig -+++ b/drivers/phy/Kconfig -@@ -15,6 +15,15 @@ config GENERIC_PHY - phy users can obtain reference to the PHY. All the users of this - framework should select this config. - -+config PHY_BCM_NS_USB2 -+ tristate "Broadcom Northstar USB 2.0 PHY Driver" -+ depends on ARCH_BCM_IPROC || COMPILE_TEST -+ depends on HAS_IOMEM && OF -+ select GENERIC_PHY -+ help -+ Enable this to support Broadcom USB 2.0 PHY connected to the USB -+ controller on Northstar family. -+ - config PHY_BERLIN_USB - tristate "Marvell Berlin USB PHY Driver" - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF ---- a/drivers/phy/Makefile -+++ b/drivers/phy/Makefile -@@ -3,6 +3,7 @@ - # - - obj-$(CONFIG_GENERIC_PHY) += phy-core.o -+obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o - obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o - obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o - obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o ---- /dev/null -+++ b/drivers/phy/phy-bcm-ns-usb2.c -@@ -0,0 +1,137 @@ -+/* -+ * Broadcom Northstar USB 2.0 PHY Driver -+ * -+ * Copyright (C) 2016 Rafał Miłecki -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct bcm_ns_usb2 { -+ struct device *dev; -+ struct clk *ref_clk; -+ struct phy *phy; -+ void __iomem *dmu; -+}; -+ -+static int bcm_ns_usb2_phy_init(struct phy *phy) -+{ -+ struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy); -+ struct device *dev = usb2->dev; -+ void __iomem *dmu = usb2->dmu; -+ u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv; -+ int err = 0; -+ -+ err = clk_prepare_enable(usb2->ref_clk); -+ if (err < 0) { -+ dev_err(dev, "Failed to prepare ref clock: %d\n", err); -+ goto err_out; -+ } -+ -+ ref_clk_rate = clk_get_rate(usb2->ref_clk); -+ if (!ref_clk_rate) { -+ dev_err(dev, "Failed to get ref clock rate\n"); -+ err = -EINVAL; -+ goto err_clk_off; -+ } -+ -+ usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL); -+ -+ if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) { -+ usb_pll_pdiv = usb2ctl; -+ usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK; -+ usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT; -+ } else { -+ usb_pll_pdiv = 1 << 3; -+ } -+ -+ /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */ -+ usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate; -+ -+ /* Unlock DMU PLL settings with some magic value */ -+ writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY); -+ -+ /* Write USB 2.0 PLL control setting */ -+ usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK; -+ usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT; -+ writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL); -+ -+ /* Lock DMU PLL settings */ -+ writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY); -+ -+err_clk_off: -+ clk_disable_unprepare(usb2->ref_clk); -+err_out: -+ return err; -+} -+ -+static const struct phy_ops ops = { -+ .init = bcm_ns_usb2_phy_init, -+ .owner = THIS_MODULE, -+}; -+ -+static int bcm_ns_usb2_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct bcm_ns_usb2 *usb2; -+ struct resource *res; -+ struct phy_provider *phy_provider; -+ -+ usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL); -+ if (!usb2) -+ return -ENOMEM; -+ usb2->dev = dev; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu"); -+ usb2->dmu = devm_ioremap_resource(dev, res); -+ if (IS_ERR(usb2->dmu)) { -+ dev_err(dev, "Failed to map DMU regs\n"); -+ return PTR_ERR(usb2->dmu); -+ } -+ -+ usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk"); -+ if (IS_ERR(usb2->ref_clk)) { -+ dev_err(dev, "Clock not defined\n"); -+ return PTR_ERR(usb2->ref_clk); -+ } -+ -+ usb2->phy = devm_phy_create(dev, NULL, &ops); -+ if (IS_ERR(dev)) -+ return PTR_ERR(dev); -+ -+ phy_set_drvdata(usb2->phy, usb2); -+ platform_set_drvdata(pdev, usb2); -+ -+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); -+ return PTR_ERR_OR_ZERO(phy_provider); -+} -+ -+static const struct of_device_id bcm_ns_usb2_id_table[] = { -+ { .compatible = "brcm,ns-usb2-phy", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table); -+ -+static struct platform_driver bcm_ns_usb2_driver = { -+ .probe = bcm_ns_usb2_probe, -+ .driver = { -+ .name = "bcm_ns_usb2", -+ .of_match_table = bcm_ns_usb2_id_table, -+ }, -+}; -+module_platform_driver(bcm_ns_usb2_driver); -+ -+MODULE_LICENSE("GPL v2"); ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -4,6 +4,7 @@ - #include - #include - -+#include - #include - #include - #include ---- /dev/null -+++ b/include/linux/bcma/bcma_driver_arm_c9.h -@@ -0,0 +1,15 @@ -+#ifndef LINUX_BCMA_DRIVER_ARM_C9_H_ -+#define LINUX_BCMA_DRIVER_ARM_C9_H_ -+ -+/* DMU (Device Management Unit) */ -+#define BCMA_DMU_CRU_USB2_CONTROL 0x0164 -+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK 0x00000FFC -+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT 2 -+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK 0x00007000 -+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT 12 -+#define BCMA_DMU_CRU_CLKSET_KEY 0x0180 -+#define BCMA_DMU_CRU_STRAPS_CTRL 0x02A0 -+#define BCMA_DMU_CRU_STRAPS_CTRL_USB3 0x00000010 -+#define BCMA_DMU_CRU_STRAPS_CTRL_4BYTE 0x00008000 -+ -+#endif /* LINUX_BCMA_DRIVER_ARM_C9_H_ */ diff --git a/target/linux/bcm53xx/patches-4.4/089-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch b/target/linux/bcm53xx/patches-4.4/089-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch deleted file mode 100644 index ae3462f43e..0000000000 --- a/target/linux/bcm53xx/patches-4.4/089-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 6c081ff6fd5abd621797570be43d5e3c6acfcd58 Mon Sep 17 00:00:00 2001 -From: Dan Carpenter -Date: Tue, 10 May 2016 11:01:33 +0300 -Subject: [PATCH] phy: bcm-ns-usb2: checking the wrong variable - -We intended to test "usb2->phy" here instead of "dev". - -Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar') -Signed-off-by: Dan Carpenter -Signed-off-by: Kishon Vijay Abraham I ---- - drivers/phy/phy-bcm-ns-usb2.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/phy/phy-bcm-ns-usb2.c -+++ b/drivers/phy/phy-bcm-ns-usb2.c -@@ -109,8 +109,8 @@ static int bcm_ns_usb2_probe(struct plat - } - - usb2->phy = devm_phy_create(dev, NULL, &ops); -- if (IS_ERR(dev)) -- return PTR_ERR(dev); -+ if (IS_ERR(usb2->phy)) -+ return PTR_ERR(usb2->phy); - - phy_set_drvdata(usb2->phy, usb2); - platform_set_drvdata(pdev, usb2);