From: H Hartley Sweeten Date: Mon, 20 Oct 2014 18:34:19 +0000 (-0700) Subject: staging: comedi: addi_apci_3120: remove analog output reset X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b9ae204658334a4a34a60dd2de6ba0415b3a79d4;p=openwrt%2Fstaging%2Fblogic.git staging: comedi: addi_apci_3120: remove analog output reset The apci3120_reset() function is called at the end of the (*auto_attach) and with the (*detach) is called to unload the driver. Part of this function resets all the analog output channels to 0V. There are two problems with this. 1) Only the APCI-3120 has analog outputs, the APCI-3001 does not. 2) The DA_READY bit in the status register needs to be checked before each write to update the analog outputs. It's unknown what the DA_READY bit does on the APCI-3001 board. Just remove the analog output reset to avoid any problems. Also, remove the unnecessary udelay() in apci3120_reset(). Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c index b6c11fed957c..fbe17917cea1 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c @@ -40,8 +40,6 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY +----------+-----------+------------------------------------------------+ */ -#include - /* * ADDON RELATED ADDITIONS */ @@ -578,22 +576,6 @@ static int apci3120_reset(struct comedi_device *dev) devpriv->us_OutputRegister = 0; outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); - /* - * Code to set the all anolog o/p channel to 0v 8191 is decimal - * value for zero(0 v)volt in bipolar mode(default) - */ - outw(8191 | APCI3120_ANALOG_OP_CHANNEL_1, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 1 */ - outw(8191 | APCI3120_ANALOG_OP_CHANNEL_2, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 2 */ - outw(8191 | APCI3120_ANALOG_OP_CHANNEL_3, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 3 */ - outw(8191 | APCI3120_ANALOG_OP_CHANNEL_4, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 4 */ - - outw(8191 | APCI3120_ANALOG_OP_CHANNEL_5, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 5 */ - outw(8191 | APCI3120_ANALOG_OP_CHANNEL_6, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 6 */ - outw(8191 | APCI3120_ANALOG_OP_CHANNEL_7, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 7 */ - outw(8191 | APCI3120_ANALOG_OP_CHANNEL_8, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 8 */ - - udelay(10); - inw(dev->iobase + 0); /* make a dummy read */ inb(dev->iobase + APCI3120_RESET_FIFO); /* flush FIFO */ inw(dev->iobase + APCI3120_RD_STATUS); /* flush A/D status register */