From: Jo-Philipp Wich <jo@mein.io>
Date: Tue, 13 Feb 2018 15:12:08 +0000 (+0100)
Subject: at91: fix image building with CONFIG_TARGET_MULTI_PROFILE
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b9aca834e812efc9d0bb2701eab8c78f2efb0367;p=openwrt%2Fstaging%2Fkaloz.git

at91: fix image building with CONFIG_TARGET_MULTI_PROFILE

The current image build code has a number of race conditions and interface
contract violations in the custom image build steps:

 - Build/install-zImage, solely used by at91, relies on $(PROFILE_SANITIZED)
   which is not available when building with CONFIG_TARGET_MULTI_PROFILE

 - Build/at91-sdcard, which may run concurrently, creates scratch files at
   fixed locations and manipulates target files directly which can lead
   to file corruption and other unexpected failures

Rename the install-zImage macro to at91-install-zImage and move it to the
at91 image Makefile since this target is the sole user. Also utilize "$@"
as output file name and switch the usage of $(PROFILE_SANITIZED) to
$(DEVICE_NAME) in order to fix naming under multi profile builds.

Fix the at91-sdcard macro to construct scratch file paths relative to "$@",
which is guaranteed to be unique and store the final artifact output in "$@"
as well, instead of inside $(BIN_DIR). The generic image build code takes
care of moving a build steps "$@" output to the final destination in a
concurrency-safe manner.

Finally remove the broken install-zImage from the generic image-commands
Makefile.

Fixes: d7a679a036 ("at91: Install zImage.")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
---

diff --git a/include/image-commands.mk b/include/image-commands.mk
index adef8f2759..555a9e5906 100644
--- a/include/image-commands.mk
+++ b/include/image-commands.mk
@@ -113,11 +113,6 @@ define Build/install-dtb
 	)
 endef
 
-define Build/install-zImage
-    $(CP) $(KDIR)/zImage \
-      $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE_SANITIZED)-zImage
-endef
-
 define Build/fit
 	$(TOPDIR)/scripts/mkits.sh \
 		-D $(DEVICE_NAME) -o $@.its -k $@ \
diff --git a/target/linux/at91/image/Makefile b/target/linux/at91/image/Makefile
index 12607073e4..ccaeebe7ca 100644
--- a/target/linux/at91/image/Makefile
+++ b/target/linux/at91/image/Makefile
@@ -9,6 +9,10 @@ include $(INCLUDE_DIR)/image.mk
 
 KERNEL_LOADADDR := 0x20008000
 
+define Build/at91-install-zImage
+    $(CP) $(KDIR)/zImage $@
+endef
+
 ifeq ($(SUBTARGET),legacy)
 include ./legacy.mk
 endif
@@ -40,7 +44,7 @@ endef
 
 define Device/evaluation-zImage
   IMAGES += zImage
-  IMAGE/zImage := install-zImage
+  IMAGE/zImage := at91-install-zImage
 endef
 
 define Device/evaluation-dtb
diff --git a/target/linux/at91/image/sama5.mk b/target/linux/at91/image/sama5.mk
index b251d714dc..e51a0bce20 100644
--- a/target/linux/at91/image/sama5.mk
+++ b/target/linux/at91/image/sama5.mk
@@ -16,24 +16,19 @@ define Build/at91-sdcard
         $(BIN_DIR)/u-boot-$(dts:at91-%=%)_mmc/u-boot.bin \
             ::u-boot.bin; \
      $(CP) $(BIN_DIR)/at91bootstrap-$(dts:at91-%=%)sd_uboot*/*.bin \
-         $(BIN_DIR)/BOOT.bin; \
-     mcopy -i $@.boot $(BIN_DIR)/BOOT.bin ::BOOT.bin;)
+         $@.BOOT.bin; \
+     mcopy -i $@.boot $@.BOOT.bin ::BOOT.bin;)
 
   ./gen_at91_sdcard_img.sh \
-      $(dir $@)$(IMG_PREFIX)-$(DEVICE_NAME)-sdcard.img \
+      $@.img \
       $@.boot \
       $(KDIR)/root.ext4 \
       $(AT91_SD_BOOT_PARTSIZE) \
       $(CONFIG_TARGET_ROOTFS_PARTSIZE)
 
-  gzip -nc9 $(dir $@)$(IMG_PREFIX)-$(DEVICE_NAME)-sdcard.img \
-         > $(dir $@)$(IMG_PREFIX)-$(DEVICE_NAME)-sdcard.img.gz
+  gzip -nc9 $@.img > $@
 
-  $(CP) $(dir $@)$(IMG_PREFIX)-$(DEVICE_NAME)-sdcard.img.gz \
-        $(BIN_DIR)/
-
-  rm -f $(BIN_DIR)/BOOT.bin
-  rm -f $@.boot
+  rm -f $@.img $@.boot $@.BOOT.bin
 endef
 
 define Device/evaluation-sdimage